0,0 → 1,823 |
/*####################################################################################### |
Flight Control |
#######################################################################################*/ |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Copyright (c) 04.2007 Holger Buss |
// + Nur für den privaten Gebrauch |
// + www.MikroKopter.com |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Es gilt für das gesamte Projekt (Hardware, Software, Binärfiles, Sourcecode und Dokumentation), |
// + dass eine Nutzung (auch auszugsweise) nur für den privaten (nicht-kommerziellen) Gebrauch zulässig ist. |
// + Sollten direkte oder indirekte kommerzielle Absichten verfolgt werden, ist mit uns (info@mikrokopter.de) Kontakt |
// + bzgl. der Nutzungsbedingungen aufzunehmen. |
// + Eine kommerzielle Nutzung ist z.B.Verkauf von MikroKoptern, Bestückung und Verkauf von Platinen oder Bausätzen, |
// + Verkauf von Luftbildaufnahmen, usw. |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Werden Teile des Quellcodes (mit oder ohne Modifikation) weiterverwendet oder veröffentlicht, |
// + unterliegen sie auch diesen Nutzungsbedingungen und diese Nutzungsbedingungen incl. Copyright müssen dann beiliegen |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Sollte die Software (auch auszugesweise) oder sonstige Informationen des MikroKopter-Projekts |
// + auf anderen Webseiten oder sonstigen Medien veröffentlicht werden, muss unsere Webseite "http://www.mikrokopter.de" |
// + eindeutig als Ursprung verlinkt werden |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Keine Gewähr auf Fehlerfreiheit, Vollständigkeit oder Funktion |
// + Benutzung auf eigene Gefahr |
// + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Die Portierung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur |
// + mit unserer Zustimmung zulässig |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Redistributions of source code (with or without modifications) must retain the above copyright notice, |
// + this list of conditions and the following disclaimer. |
// + * Neither the name of the copyright holders nor the names of contributors may be used to endorse or promote products derived |
// + from this software without specific prior written permission. |
// + * The use of this project (hardware, software, binary files, sources and documentation) is only permittet |
// + for non-commercial use (directly or indirectly) |
// + Commercial use (for excample: selling of MikroKopters, selling of PCBs, assembly, ...) is only permitted |
// + with our written permission |
// + * If sources or documentations are redistributet on other webpages, out webpage (http://www.MikroKopter.de) must be |
// + clearly linked as origin |
// + * porting to systems other than hardware from www.mikrokopter.de is not allowed |
// + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
// + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
// + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
// + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
// + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
// + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
// + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
// + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
// + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
// + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
// + POSSIBILITY OF SUCH DAMAGE. |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
|
#include "main.h" |
|
unsigned char h,m,s; |
volatile unsigned char Timeout = 0; |
volatile int MesswertNick,MesswertRoll,MesswertGier; |
volatile int AdNeutralNick = 0,AdNeutralRoll = 0,AdNeutralGier = 0; |
volatile int Mittelwert_AccNick, Mittelwert_AccRoll,Mittelwert_AccHoch; |
unsigned char CosinusNickWinkel = 0, CosinusRollWinkel = 0; |
volatile long IntegralNick = 0,IntegralNick2 = 0; |
volatile long IntegralRoll = 0,IntegralRoll2 = 0; |
volatile long Integral_Gier = 0; |
volatile long Mess_IntegralNick = 0,Mess_IntegralNick2 = 0; |
volatile long Mess_IntegralRoll = 0,Mess_IntegralRoll2 = 0; |
volatile long Mess_Integral_Gier = 0,Mess_Integral_Gier2 = 0; |
volatile long Mess_Integral_Hoch = 0; |
volatile int KompassValue = 0; |
volatile int KompassStartwert = 0; |
volatile int KompassRichtung = 0; |
unsigned char MAX_GAS,MIN_GAS; |
unsigned char Notlandung = 0; |
unsigned char HoehenReglerAktiv = 0; |
|
float GyroFaktor; |
float IntegralFaktor; |
|
volatile int DiffNick,DiffRoll; |
int Poti1 = 0, Poti2 = 0, Poti3 = 0, Poti4 = 0; |
volatile unsigned char Motor_Vorne,Motor_Hinten,Motor_Rechts,Motor_Links, Count; |
unsigned char MotorWert[5]; |
volatile unsigned char SenderOkay = 0; |
int StickNick = 0,StickRoll = 0,StickGier = 0; |
char MotorenEin = 0; |
int HoehenWert = 0; |
int SollHoehe = 0; |
|
float Kp = FAKTOR_P; |
float Ki = FAKTOR_I; |
|
unsigned char Parameter_Luftdruck_D = 48; // Wert : 0-250 |
unsigned char Parameter_MaxHoehe = 251; // Wert : 0-250 |
unsigned char Parameter_Hoehe_P = 16; // Wert : 0-32 |
unsigned char Parameter_Hoehe_ACC_Wirkung = 58; // Wert : 0-250 |
unsigned char Parameter_KompassWirkung = 64; // Wert : 0-250 |
unsigned char Parameter_Gyro_P = 50; // Wert : 10-250 |
unsigned char Parameter_Gyro_I = 150; // Wert : 0-250 |
unsigned char Parameter_Gier_P = 2; // Wert : 1-20 |
unsigned char Parameter_I_Faktor = 10; // Wert : 1-20 |
unsigned char Parameter_UserParam1 = 0; |
unsigned char Parameter_UserParam2 = 0; |
unsigned char Parameter_UserParam3 = 0; |
unsigned char Parameter_UserParam4 = 0; |
unsigned char Parameter_ServoNickControl = 100; |
struct mk_param_struct EE_Parameter; |
|
struct acc_neutral_struct ee_acc_neutral EEMEM; |
struct acc_neutral_struct acc_neutral; |
|
void Piep(unsigned char Anzahl) |
{ |
while(Anzahl--) |
{ |
if(MotorenEin) return; //auf keinen Fall im Flug! |
beeptime = 100; |
Delay_ms(250); |
} |
} |
|
|
//############################################################################ |
// Neutrallage kalibrieren und fest im EEPROM abspeichern |
void calib_acc(void) |
//############################################################################ |
{ |
unsigned int timer; |
acc_neutral.X = 0; |
acc_neutral.Y = 0; |
acc_neutral.Z = 0; |
CalibrierMittelwert(); |
timer = SetDelay(5); |
while (!CheckDelay(timer)); |
CalibrierMittelwert(); |
|
acc_neutral.X = abs(Mittelwert_AccNick) / ACC_AMPLIFY; |
acc_neutral.Y = abs(Mittelwert_AccRoll) / ACC_AMPLIFY; |
acc_neutral.Z = Aktuell_az; |
|
eeprom_write_block(&acc_neutral,&ee_acc_neutral,sizeof(struct acc_neutral_struct)); |
} |
|
//############################################################################ |
// Nullwerte ermitteln |
void SetNeutral(void) |
//############################################################################ |
{ |
unsigned int timer; |
acc_neutral.X = 0; |
acc_neutral.Y = 0; |
acc_neutral.Z = 0; |
AdNeutralNick = 0; |
AdNeutralRoll = 0; |
AdNeutralGier = 0; |
CalibrierMittelwert(); |
timer = SetDelay(5); |
while (!CheckDelay(timer)); |
CalibrierMittelwert(); |
if((EE_Parameter.GlobalConfig & CFG_HOEHENREGELUNG)) // Höhenregelung aktiviert? |
{ |
if((MessLuftdruck > 950) || (MessLuftdruck < 750)) SucheLuftruckOffset(); |
} |
AdNeutralNick= abs(MesswertNick); |
AdNeutralRoll= abs(MesswertRoll); |
AdNeutralGier= abs(MesswertGier); |
|
eeprom_read_block(&acc_neutral,&ee_acc_neutral,sizeof(struct acc_neutral_struct)); |
|
Mess_IntegralNick = 0; |
Mess_IntegralNick2 = 0; |
Mess_IntegralRoll = 0; |
Mess_IntegralRoll2 = 0; |
Mess_Integral_Gier = 0; |
MesswertNick = 0; |
MesswertRoll = 0; |
MesswertGier = 0; |
StartLuftdruck = Luftdruck; |
HoeheD = 0; |
Mess_Integral_Hoch = 0; |
KompassStartwert = KompassValue; |
GPS_Neutral(); |
beeptime = 50; |
} |
|
//############################################################################ |
// Bildet den Mittelwert aus den Messwerten |
void Mittelwert(void) |
//############################################################################ |
{ |
// ADC auschalten, damit die Werte sich nicht während der Berechnung ändern |
ANALOG_OFF; |
if(MessanzahlNick) (MesswertNick = AccumulateNick / MessanzahlNick); |
if(MessanzahlRoll) (MesswertRoll = AccumulateRoll / MessanzahlRoll); |
if(MessanzahlGier) (MesswertGier = AccumulateGier / MessanzahlGier); |
if(messanzahl_AccNick) Mittelwert_AccNick = ((long)Mittelwert_AccNick * 7 + ((ACC_AMPLIFY * (long)accumulate_AccNick) / messanzahl_AccNick)) / 8L; |
if(messanzahl_AccRoll) Mittelwert_AccRoll = ((long)Mittelwert_AccRoll * 7 + ((ACC_AMPLIFY * (long)accumulate_AccRoll) / messanzahl_AccRoll)) / 8L; |
if(messanzahl_AccHoch) Mittelwert_AccHoch = ((long)Mittelwert_AccHoch * 7 + ((long)accumulate_AccHoch) / messanzahl_AccHoch) / 8L; |
AccumulateNick = 0; MessanzahlNick = 0; |
AccumulateRoll = 0; MessanzahlRoll = 0; |
AccumulateGier = 0; MessanzahlGier = 0; |
accumulate_AccRoll = 0;messanzahl_AccRoll = 0; |
accumulate_AccNick = 0;messanzahl_AccNick = 0; |
accumulate_AccHoch = 0;messanzahl_AccHoch = 0; |
Integral_Gier = Mess_Integral_Gier; |
// Integral_Gier2 = Mess_Integral_Gier2; |
IntegralNick = Mess_IntegralNick; |
IntegralRoll = Mess_IntegralRoll; |
IntegralNick2 = Mess_IntegralNick2; |
IntegralRoll2 = Mess_IntegralRoll2; |
// ADC einschalten |
ANALOG_ON; |
|
/* |
//------------------------------------------------------------------------------ |
if(MesswertNick > 200) MesswertNick += 4 * (MesswertNick - 200); |
else |
if(MesswertNick < -200) MesswertNick += 4 * (MesswertNick + 200); |
|
if(MesswertRoll > 200) MesswertRoll += 4 * (MesswertRoll - 200); |
else |
if(MesswertRoll < -200) MesswertRoll += 4 * (MesswertRoll + 200); |
//------------------------------------------------------------------------------ |
*/ |
if(Poti1 < PPM_in[EE_Parameter.Kanalbelegung[K_POTI1]] + 110) Poti1++; else if(Poti1 > PPM_in[EE_Parameter.Kanalbelegung[K_POTI1]] + 110 && Poti1) Poti1--; |
if(Poti2 < PPM_in[EE_Parameter.Kanalbelegung[K_POTI2]] + 110) Poti2++; else if(Poti2 > PPM_in[EE_Parameter.Kanalbelegung[K_POTI2]] + 110 && Poti2) Poti2--; |
if(Poti3 < PPM_in[EE_Parameter.Kanalbelegung[K_POTI3]] + 110) Poti3++; else if(Poti3 > PPM_in[EE_Parameter.Kanalbelegung[K_POTI3]] + 110 && Poti3) Poti3--; |
if(Poti4 < PPM_in[EE_Parameter.Kanalbelegung[K_POTI4]] + 110) Poti4++; else if(Poti4 > PPM_in[EE_Parameter.Kanalbelegung[K_POTI4]] + 110 && Poti4) Poti4--; |
if(Poti1 < 0) Poti1 = 0; else if(Poti1 > 255) Poti1 = 255; |
if(Poti2 < 0) Poti2 = 0; else if(Poti2 > 255) Poti2 = 255; |
if(Poti3 < 0) Poti3 = 0; else if(Poti3 > 255) Poti3 = 255; |
if(Poti4 < 0) Poti4 = 0; else if(Poti4 > 255) Poti4 = 255; |
} |
|
//############################################################################ |
// Messwerte beim Ermitteln der Nullage |
void CalibrierMittelwert(void) |
//############################################################################ |
{ |
// ADC auschalten, damit die Werte sich nicht während der Berechnung ändern |
ANALOG_OFF; |
if(MessanzahlNick) (MesswertNick = AccumulateNick / MessanzahlNick); |
if(MessanzahlRoll) (MesswertRoll = AccumulateRoll / MessanzahlRoll); |
if(MessanzahlGier) (MesswertGier = AccumulateGier / MessanzahlGier); |
if(messanzahl_AccNick) Mittelwert_AccNick = ((ACC_AMPLIFY * (long)accumulate_AccNick) / messanzahl_AccNick); |
if(messanzahl_AccRoll) Mittelwert_AccRoll = (ACC_AMPLIFY * (long)accumulate_AccRoll) / messanzahl_AccRoll; |
if(messanzahl_AccHoch) Mittelwert_AccHoch = ((long)accumulate_AccHoch) / messanzahl_AccHoch; |
AccumulateNick = 0; MessanzahlNick = 0; |
AccumulateRoll = 0; MessanzahlRoll = 0; |
AccumulateGier = 0; MessanzahlGier = 0; |
accumulate_AccRoll = 0;messanzahl_AccRoll = 0; |
accumulate_AccNick = 0;messanzahl_AccNick = 0; |
accumulate_AccHoch = 0;messanzahl_AccHoch = 0; |
// ADC einschalten |
ANALOG_ON; |
if(Poti1 < PPM_in[EE_Parameter.Kanalbelegung[K_POTI1]] + 110) Poti1++; else if(Poti1 > PPM_in[EE_Parameter.Kanalbelegung[K_POTI1]] + 110 && Poti1) Poti1--; |
if(Poti2 < PPM_in[EE_Parameter.Kanalbelegung[K_POTI2]] + 110) Poti2++; else if(Poti2 > PPM_in[EE_Parameter.Kanalbelegung[K_POTI2]] + 110 && Poti2) Poti2--; |
if(Poti3 < PPM_in[EE_Parameter.Kanalbelegung[K_POTI3]] + 110) Poti3++; else if(Poti3 > PPM_in[EE_Parameter.Kanalbelegung[K_POTI3]] + 110 && Poti3) Poti3--; |
if(Poti4 < PPM_in[EE_Parameter.Kanalbelegung[K_POTI4]] + 110) Poti4++; else if(Poti4 > PPM_in[EE_Parameter.Kanalbelegung[K_POTI4]] + 110 && Poti4) Poti4--; |
if(Poti1 < 0) Poti1 = 0; else if(Poti1 > 255) Poti1 = 255; |
if(Poti2 < 0) Poti2 = 0; else if(Poti2 > 255) Poti2 = 255; |
if(Poti3 < 0) Poti3 = 0; else if(Poti3 > 255) Poti3 = 255; |
if(Poti4 < 0) Poti4 = 0; else if(Poti4 > 255) Poti4 = 255; |
} |
|
//############################################################################ |
// Senden der Motorwerte per I2C-Bus |
void SendMotorData(void) |
//############################################################################ |
{ |
if(MOTOR_OFF || !MotorenEin) |
{ |
Motor_Hinten = 0; |
Motor_Vorne = 0; |
Motor_Rechts = 0; |
Motor_Links = 0; |
if(MotorTest[0]) Motor_Vorne = MotorTest[0]; |
if(MotorTest[1]) Motor_Hinten = MotorTest[1]; |
if(MotorTest[2]) Motor_Links = MotorTest[2]; |
if(MotorTest[3]) Motor_Rechts = MotorTest[3]; |
} |
|
DebugOut.Analog[12] = Motor_Vorne; |
DebugOut.Analog[13] = Motor_Hinten; |
DebugOut.Analog[14] = Motor_Links; |
DebugOut.Analog[15] = Motor_Rechts; |
|
//Start I2C Interrupt Mode |
twi_state = 0; |
motor = 0; |
i2c_start(); |
} |
|
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Konstanten |
// + 0-250 -> normale Werte |
// + 251 -> Poti1 |
// + 252 -> Poti2 |
// + 253 -> Poti3 |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
void DefaultKonstanten1(void) |
{ |
EE_Parameter.Kanalbelegung[K_NICK] = 1; |
EE_Parameter.Kanalbelegung[K_ROLL] = 2; |
EE_Parameter.Kanalbelegung[K_GAS] = 3; |
EE_Parameter.Kanalbelegung[K_GIER] = 4; |
EE_Parameter.Kanalbelegung[K_POTI1] = 5; |
EE_Parameter.Kanalbelegung[K_POTI2] = 6; |
EE_Parameter.Kanalbelegung[K_POTI3] = 7; |
EE_Parameter.Kanalbelegung[K_POTI4] = 8; |
EE_Parameter.GlobalConfig = 0;//CFG_HOEHENREGELUNG | /*CFG_HOEHEN_SCHALTER |*/ CFG_KOMPASS_AKTIV | CFG_KOMPASS_FIX;//0x01; |
EE_Parameter.Hoehe_MinGas = 30; |
EE_Parameter.MaxHoehe = 251; // Wert : 0-32 251 -> Poti1 |
EE_Parameter.Hoehe_P = 10; // Wert : 0-32 |
EE_Parameter.Luftdruck_D = 70; // Wert : 0-250 |
EE_Parameter.Hoehe_ACC_Wirkung = 30; // Wert : 0-250 |
EE_Parameter.Hoehe_Verstaerkung = 2; // Wert : 0-50 |
EE_Parameter.Stick_P = 4; //2 // Wert : 1-6 |
EE_Parameter.Stick_D = 8; //8 // Wert : 0-64 |
EE_Parameter.Gier_P = 16; // Wert : 1-20 |
EE_Parameter.Gas_Min = 15; // Wert : 0-32 |
EE_Parameter.Gas_Max = 250; // Wert : 33-250 |
EE_Parameter.GyroAccFaktor = 26; // Wert : 1-64 |
EE_Parameter.KompassWirkung = 16; // Wert : 0-250 |
EE_Parameter.Gyro_P = 120; //80 // Wert : 0-250 |
EE_Parameter.Gyro_I = 150; // Wert : 0-250 |
EE_Parameter.UnterspannungsWarnung = 90; // Wert : 0-250 |
EE_Parameter.NotGas = 35; // Wert : 0-250 // Gaswert bei Empangsverlust |
EE_Parameter.NotGasZeit = 20; // Wert : 0-250 // Zeit bis auf NotGas geschaltet wird, wg. Rx-Problemen |
EE_Parameter.UfoAusrichtung = 0; // X oder + Formation |
EE_Parameter.I_Faktor = 5; |
EE_Parameter.UserParam1 = 120; //zur freien Verwendung |
EE_Parameter.UserParam2 = 120; //zur freien Verwendung |
EE_Parameter.UserParam3 = 0; //zur freien Verwendung |
EE_Parameter.UserParam4 = 0; //zur freien Verwendung |
EE_Parameter.ServoNickControl = 100; // Wert : 0-250 // Stellung des Servos |
EE_Parameter.ServoNickComp = 40; // Wert : 0-250 // Einfluss Gyro/Servo |
EE_Parameter.ServoNickCompInvert = 0; // Wert : 0-250 // Richtung Einfluss Gyro/Servo |
EE_Parameter.ServoNickMin = 50; // Wert : 0-250 // Anschlag |
EE_Parameter.ServoNickMax = 150; // Wert : 0-250 // Anschlag |
EE_Parameter.ServoNickRefresh = 5; |
memcpy(EE_Parameter.Name, "Normal\0", 12); |
} |
|
void DefaultKonstanten2(void) |
{ |
EE_Parameter.Kanalbelegung[K_NICK] = 1; |
EE_Parameter.Kanalbelegung[K_ROLL] = 2; |
EE_Parameter.Kanalbelegung[K_GAS] = 3; |
EE_Parameter.Kanalbelegung[K_GIER] = 4; |
EE_Parameter.Kanalbelegung[K_POTI1] = 5; |
EE_Parameter.Kanalbelegung[K_POTI2] = 6; |
EE_Parameter.Kanalbelegung[K_POTI3] = 7; |
EE_Parameter.GlobalConfig = 0;//CFG_HOEHENREGELUNG | /*CFG_HOEHEN_SCHALTER |*/ CFG_KOMPASS_AKTIV;//0x01; |
EE_Parameter.Hoehe_MinGas = 30; |
EE_Parameter.MaxHoehe = 251; // Wert : 0-32 251 -> Poti1 |
EE_Parameter.Hoehe_P = 10; // Wert : 0-32 |
EE_Parameter.Luftdruck_D = 50; // Wert : 0-250 |
EE_Parameter.Hoehe_ACC_Wirkung = 50; // Wert : 0-250 |
EE_Parameter.Hoehe_Verstaerkung = 2; // Wert : 0-50 |
EE_Parameter.Stick_P = 4; //2 // Wert : 1-6 |
EE_Parameter.Stick_D = 0; //8 // Wert : 0-64 |
EE_Parameter.Gier_P = 16; // Wert : 1-20 |
EE_Parameter.Gas_Min = 15; // Wert : 0-32 |
EE_Parameter.Gas_Max = 250; // Wert : 33-250 |
EE_Parameter.GyroAccFaktor = 26; // Wert : 1-64 |
EE_Parameter.KompassWirkung = 16; // Wert : 0-250 |
EE_Parameter.Gyro_P = 175; //80 // Wert : 0-250 |
EE_Parameter.Gyro_I = 175; // Wert : 0-250 |
EE_Parameter.UnterspannungsWarnung = 90; // Wert : 0-250 |
EE_Parameter.NotGas = 35; // Wert : 0-250 // Gaswert bei Empangsverlust |
EE_Parameter.NotGasZeit = 20; // Wert : 0-250 // Zeit bis auf NotGas geschaltet wird, wg. Rx-Problemen |
EE_Parameter.UfoAusrichtung = 0; // X oder + Formation |
EE_Parameter.I_Faktor = 5; |
EE_Parameter.UserParam1 = 120; //zur freien Verwendung |
EE_Parameter.UserParam2 = 120; //zur freien Verwendung |
EE_Parameter.UserParam3 = 0; //zur freien Verwendung |
EE_Parameter.UserParam4 = 0; //zur freien Verwendung |
EE_Parameter.UserParam3 = 0; //zur freien Verwendung |
EE_Parameter.UserParam4 = 0; //zur freien Verwendung |
EE_Parameter.ServoNickControl = 100; // Wert : 0-250 // Stellung des Servos |
EE_Parameter.ServoNickComp = 40; // Wert : 0-250 // Einfluss Gyro/Servo |
EE_Parameter.ServoNickCompInvert = 0; // Wert : 0-250 // Richtung Einfluss Gyro/Servo |
EE_Parameter.ServoNickMin = 50; // Wert : 0-250 // Anschlag |
EE_Parameter.ServoNickMax = 150; // Wert : 0-250 // Anschlag |
EE_Parameter.ServoNickRefresh = 5; |
memcpy(EE_Parameter.Name, "Kamera\0", 12); |
} |
|
|
//############################################################################ |
// Trägt ggf. das Poti als Parameter ein |
void ParameterZuordnung(void) |
//############################################################################ |
{ |
|
#define CHK_POTI(b,a,min,max) { if(a > 250) { if(a == 251) b = Poti1; else if(a == 252) b = Poti2; else if(a == 253) b = Poti3; else if(a == 254) b = Poti4;} else b = a; if(b <= min) b = min; else if(b >= max) b = max;} |
CHK_POTI(Parameter_MaxHoehe,EE_Parameter.MaxHoehe,0,255); |
CHK_POTI(Parameter_Luftdruck_D,EE_Parameter.Luftdruck_D,0,100); |
CHK_POTI(Parameter_Hoehe_P,EE_Parameter.Hoehe_P,0,100); |
CHK_POTI(Parameter_Hoehe_ACC_Wirkung,EE_Parameter.Hoehe_ACC_Wirkung,0,255); |
CHK_POTI(Parameter_KompassWirkung,EE_Parameter.KompassWirkung,0,255); |
CHK_POTI(Parameter_Gyro_P,EE_Parameter.Gyro_P,10,255); |
CHK_POTI(Parameter_Gyro_I,EE_Parameter.Gyro_I,0,255); |
CHK_POTI(Parameter_I_Faktor,EE_Parameter.I_Faktor,0,255); |
CHK_POTI(Parameter_UserParam1,EE_Parameter.UserParam1,0,255); |
CHK_POTI(Parameter_UserParam2,EE_Parameter.UserParam2,0,255); |
CHK_POTI(Parameter_UserParam3,EE_Parameter.UserParam3,0,255); |
CHK_POTI(Parameter_UserParam4,EE_Parameter.UserParam4,0,255); |
|
CHK_POTI(Parameter_ServoNickControl,EE_Parameter.ServoNickControl,0,255); |
CHK_POTI(Parameter_ServoNickControl,EE_Parameter.ServoNickControl,0,255); |
CHK_POTI(Parameter_ServoNickControl,EE_Parameter.ServoNickControl,0,255); |
|
Ki = (float) Parameter_I_Faktor * 0.0001; |
MAX_GAS = EE_Parameter.Gas_Max; |
MIN_GAS = EE_Parameter.Gas_Min; |
} |
|
|
//############################################################################ |
// |
void MotorRegler(void) |
//############################################################################ |
{ |
int motorwert,pd_ergebnis,h,tmp_int; |
int GierMischanteil,GasMischanteil; |
static long SummeNick=0,SummeRoll=0; |
static long sollGier = 0,tmp_long,tmp_long2; |
static int IntegralFehlerNick = 0; |
static int IntegralFehlerRoll = 0; |
static unsigned int RcLostTimer; |
static unsigned char delay_neutral = 0; |
static unsigned char delay_einschalten = 0,delay_ausschalten = 0; |
static unsigned int modell_fliegt = 0; |
static int hoehenregler = 0; |
static char TimerWerteausgabe = 0; |
static char NeueKompassRichtungMerken = 0; |
Mittelwert(); |
|
GRN_ON; |
|
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Gaswert ermitteln |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
GasMischanteil = PPM_in[EE_Parameter.Kanalbelegung[K_GAS]] + 120; |
if(GasMischanteil < 0) GasMischanteil = 0; |
|
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Emfang schlecht |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
if(SenderOkay < 100) |
{ |
if(!PcZugriff) beeptime = 500; |
if(RcLostTimer) RcLostTimer--; |
else |
{ |
MotorenEin = 0; |
Notlandung = 0; |
} |
ROT_ON; |
if(modell_fliegt > 2000) // wahrscheinlich in der Luft --> langsam absenken |
{ |
GasMischanteil = EE_Parameter.NotGas; |
Notlandung = 1; |
PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] = 0; |
PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] = 0; |
PPM_in[EE_Parameter.Kanalbelegung[K_GIER]] = 0; |
/* Poti1 = 65; |
Poti2 = 48; |
Poti3 = 0; |
*/ } |
else MotorenEin = 0; |
} |
else |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Emfang gut |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
if(SenderOkay > 140) |
{ |
Notlandung = 0; |
RcLostTimer = EE_Parameter.NotGasZeit * 50; |
if(GasMischanteil > 40) |
{ |
if(modell_fliegt < 0xffff) modell_fliegt++; |
} |
if((modell_fliegt < 200) || (GasMischanteil < 40)) |
{ |
SummeNick = 0; |
SummeRoll = 0; |
Mess_Integral_Gier = 0; |
Mess_Integral_Gier2 = 0; |
} |
if((GasMischanteil > 200) && MotorenEin == 0) |
{ |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// auf Nullwerte kalibrieren |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
if(PPM_in[EE_Parameter.Kanalbelegung[K_GIER]] > 75) // Neutralwerte |
{ |
unsigned char setting; |
if(++delay_neutral > 200) // nicht sofort |
{ |
GRN_OFF; |
SetNeutral(); |
MotorenEin = 0; |
delay_neutral = 0; |
modell_fliegt = 0; |
if(PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] > 70 || abs(PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]]) > 70) |
{ |
if(PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] > 70 && PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] < 70) setting = 1; |
if(PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] > 70 && PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] > 70) setting = 2; |
if(PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] < 70 && PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] > 70) setting = 3; |
if(PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] <-70 && PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] > 70) setting = 4; |
if(PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] <-70 && PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] < 70) setting = 5; |
eeprom_write_byte(&EEPromArray[EEPROM_ADR_ACTIVE_SET], setting); // aktiven Datensatz merken |
} |
ReadParameterSet(GetActiveParamSetNumber(), (unsigned char *) &EE_Parameter.Kanalbelegung[0], sizeof(struct mk_param_struct)); |
Piep(GetActiveParamSetNumber()); |
if((EE_Parameter.GlobalConfig & CFG_HOEHENREGELUNG)) // Höhenregelung aktiviert? |
{ |
if((MessLuftdruck > 950) || (MessLuftdruck < 750)) SucheLuftruckOffset(); |
} |
} |
} |
else delay_neutral = 0; |
} |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Gas ist unten |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
if(GasMischanteil < 35) |
{ |
// Starten |
if(PPM_in[EE_Parameter.Kanalbelegung[K_GIER]] < -75) |
{ |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Einschalten |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
if(++delay_einschalten > 200) |
{ |
delay_einschalten = 200; |
modell_fliegt = 1; |
MotorenEin = 1; |
sollGier = 0; |
Mess_Integral_Gier = 0; |
Mess_Integral_Gier2 = 0; |
Mess_IntegralNick = 0; |
Mess_IntegralRoll = 0; |
Mess_IntegralNick2 = IntegralNick; |
Mess_IntegralRoll2 = IntegralRoll; |
SummeNick = 0; |
SummeRoll = 0; |
} |
} |
else delay_einschalten = 0; |
//Auf Neutralwerte setzen |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Auschalten |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
if(PPM_in[EE_Parameter.Kanalbelegung[K_GIER]] > 75) |
{ |
if(++delay_ausschalten > 200) // nicht sofort |
{ |
MotorenEin = 0; |
delay_ausschalten = 200; |
modell_fliegt = 0; |
} |
} |
else delay_ausschalten = 0; |
} |
} |
|
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// neue Werte von der Funke |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
if(!NewPpmData-- || Notlandung) |
{ |
ParameterZuordnung(); |
StickNick = PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] * EE_Parameter.Stick_P; |
StickNick += PPM_diff[EE_Parameter.Kanalbelegung[K_NICK]] * EE_Parameter.Stick_D; |
StickRoll = PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] * EE_Parameter.Stick_P; |
StickRoll += PPM_diff[EE_Parameter.Kanalbelegung[K_ROLL]] * EE_Parameter.Stick_D; |
StickGier = -PPM_in[EE_Parameter.Kanalbelegung[K_GIER]]; |
|
GyroFaktor = ((float)Parameter_Gyro_P + 10.0) / 256.0; |
IntegralFaktor = ((float) Parameter_Gyro_I) / 44000; |
|
if(EE_Parameter.GlobalConfig & CFG_HEADING_HOLD) IntegralFaktor = 0; |
if(GyroFaktor < 0) GyroFaktor = 0; |
if(IntegralFaktor < 0) IntegralFaktor = 0; |
} |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Bei Empfangsausfall im Flug |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
if(Notlandung) |
{ |
StickGier = 0; |
StickNick = 0; |
StickRoll = 0; |
GyroFaktor = 0.1; |
IntegralFaktor = 0.005; |
} |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Gyro-Drift kompensieren |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
#define DRIFT_FAKTOR 3 |
if(ZaehlMessungen >= 1000 / DRIFT_FAKTOR) |
{ |
IntegralFehlerNick = IntegralNick2 - IntegralNick; |
IntegralFehlerRoll = IntegralRoll2 - IntegralRoll; |
ZaehlMessungen = 0; |
if(IntegralFehlerNick > 500/DRIFT_FAKTOR) AdNeutralNick++; |
if(IntegralFehlerNick < -500/DRIFT_FAKTOR) AdNeutralNick--; |
if(IntegralFehlerRoll > 500/DRIFT_FAKTOR) AdNeutralRoll++; |
if(IntegralFehlerRoll < -500/DRIFT_FAKTOR) AdNeutralRoll--; |
//if(Mess_Integral_Gier2 > 500/DRIFT_FAKTOR) AdNeutralGier--; |
//if(Mess_Integral_Gier2 <-500/DRIFT_FAKTOR) AdNeutralGier++; |
ANALOG_OFF; // ADC ausschalten, damit die Werte sich nicht während der Berechnung ändern |
Mess_IntegralNick2 = IntegralNick; |
Mess_IntegralRoll2 = IntegralRoll; |
Mess_Integral_Gier2 = Integral_Gier; |
ANALOG_ON; // ADC einschalten |
} |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Integrale auf ACC-Signal abgleichen |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
tmp_long = (long)(IntegralNick / EE_Parameter.GyroAccFaktor - (long)Mittelwert_AccNick) / 16; |
tmp_long2 = (long)(IntegralRoll / EE_Parameter.GyroAccFaktor - (long)Mittelwert_AccRoll) / 16; |
#define AUSGLEICH 500 |
if(tmp_long > AUSGLEICH) tmp_long = AUSGLEICH; |
if(tmp_long < -AUSGLEICH) tmp_long =-AUSGLEICH; |
if(tmp_long2 > AUSGLEICH) tmp_long2 = AUSGLEICH; |
if(tmp_long2 <-AUSGLEICH) tmp_long2 =-AUSGLEICH; |
ANALOG_OFF; // ADC ausschalten, damit die Werte sich nicht während der Berechnung ändern |
Mess_IntegralNick -= tmp_long; |
Mess_IntegralRoll -= tmp_long2; |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Gieren |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
sollGier = StickGier; |
if(abs(StickGier) > 35) |
{ |
if(!(EE_Parameter.GlobalConfig & CFG_KOMPASS_FIX)) NeueKompassRichtungMerken = 1; |
} |
tmp_int = EE_Parameter.Gier_P * (sollGier * abs(sollGier)) / 256; // expo |
Mess_Integral_Gier -= tmp_int; |
if(Mess_Integral_Gier > 30000) Mess_Integral_Gier = 30000; // begrenzen |
if(Mess_Integral_Gier <-30000) Mess_Integral_Gier =-30000; |
|
ANALOG_ON; // ADC einschalten |
|
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Kompass |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
if(KompassValue && (EE_Parameter.GlobalConfig & CFG_KOMPASS_AKTIV)) |
{ |
if(NeueKompassRichtungMerken) |
{ |
KompassStartwert = KompassValue; |
NeueKompassRichtungMerken = 0; |
} |
ANALOG_OFF; // ADC ausschalten, damit die Werte sich nicht während der Berechnung ändern |
Mess_Integral_Gier -= (KompassRichtung * Parameter_KompassWirkung) / 32; // nach Kompass ausrichten |
ANALOG_ON; // ADC einschalten |
} |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
|
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Debugwerte zuordnen |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
DebugOut.Sekunden++; |
if(!TimerWerteausgabe--) |
{ |
TimerWerteausgabe = 49; |
// DebugOut.Analog[0] = MesswertNick; |
// DebugOut.Analog[1] = MesswertRoll; |
// DebugOut.Analog[2] = MesswertGier; |
// DebugOut.Analog[0] = IntegralNick / EE_Parameter.GyroAccFaktor; |
// DebugOut.Analog[1] = IntegralRoll / EE_Parameter.GyroAccFaktor; |
|
DebugOut.Analog[0] = MM3.NickGrad; |
DebugOut.Analog[1] = MM3.RollGrad; |
DebugOut.Analog[2] = Mittelwert_AccNick; |
DebugOut.Analog[3] = Mittelwert_AccRoll; |
DebugOut.Analog[4] = MesswertGier; |
DebugOut.Analog[5] = HoehenWert; |
DebugOut.Analog[6] = (Mess_Integral_Hoch / 512); |
DebugOut.Analog[7] = GasMischanteil; |
DebugOut.Analog[8] = KompassValue; |
|
// Kanäle 9 bis 11 in compass.c |
|
// DebugOut.Analog[9] = SollHoehe; |
// DebugOut.Analog[10] = Mess_Integral_Gier / 128; |
// DebugOut.Analog[11] = KompassStartwert; |
// DebugOut.Analog[10] = Parameter_Gyro_I; |
// DebugOut.Analog[10] = EE_Parameter.Gyro_I; |
// DebugOut.Analog[9] = KompassRichtung; |
// DebugOut.Analog[10] = GasMischanteil; |
// DebugOut.Analog[3] = HoeheD * 32; |
// DebugOut.Analog[4] = hoehenregler; |
} |
|
|
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Drehgeschwindigkeit und -winkel zu einem Istwert zusammenfassen |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
MesswertNick = IntegralNick * IntegralFaktor + MesswertNick * GyroFaktor; |
MesswertRoll = IntegralRoll * IntegralFaktor + MesswertRoll * GyroFaktor; |
MesswertGier = MesswertGier * (GyroFaktor/2) + Integral_Gier * IntegralFaktor; |
// Maximalwerte abfangen |
#define MAX_SENSOR 2048 |
if(MesswertNick > MAX_SENSOR) MesswertNick = MAX_SENSOR; |
if(MesswertNick < -MAX_SENSOR) MesswertNick = -MAX_SENSOR; |
if(MesswertRoll > MAX_SENSOR) MesswertRoll = MAX_SENSOR; |
if(MesswertRoll < -MAX_SENSOR) MesswertRoll = -MAX_SENSOR; |
if(MesswertGier > MAX_SENSOR) MesswertGier = MAX_SENSOR; |
if(MesswertGier < -MAX_SENSOR) MesswertGier = -MAX_SENSOR; |
|
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Höhenregelung |
// Die Höhenregelung schwächt lediglich das Gas ab, erhöht es allerdings nicht |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
//OCR0B = 180 - (Poti1 + 120) / 4; |
//DruckOffsetSetting = OCR0B; |
if((EE_Parameter.GlobalConfig & CFG_HOEHENREGELUNG)) // Höhenregelung |
{ |
int tmp_int; |
if(EE_Parameter.GlobalConfig & CFG_HOEHEN_SCHALTER) // Regler wird über Schalter gesteuert |
{ |
if(Parameter_MaxHoehe < 50) |
{ |
SollHoehe = HoehenWert - 20; // Parameter_MaxHoehe ist der PPM-Wert des Schalters |
HoehenReglerAktiv = 0; |
} |
else |
HoehenReglerAktiv = 1; |
} |
else |
{ |
SollHoehe = Parameter_MaxHoehe * EE_Parameter.Hoehe_Verstaerkung - 20; |
HoehenReglerAktiv = 1; |
} |
|
if(Notlandung) SollHoehe = 0; |
h = HoehenWert; |
if((h > SollHoehe) && HoehenReglerAktiv) // zu hoch --> drosseln |
{ h = ((h - SollHoehe) * (int) Parameter_Hoehe_P) / 16; // Differenz bestimmen --> P-Anteil |
h = GasMischanteil - h; // vom Gas abziehen |
h -= (HoeheD * Parameter_Luftdruck_D)/8; // D-Anteil |
tmp_int = ((Mess_Integral_Hoch / 512) * (signed long) Parameter_Hoehe_ACC_Wirkung) / 32; |
if(tmp_int > 50) tmp_int = 50; |
else if(tmp_int < -50) tmp_int = -50; |
h -= tmp_int; |
hoehenregler = (hoehenregler*15 + h) / 16; |
if(hoehenregler < EE_Parameter.Hoehe_MinGas) // nicht unter MIN |
{ |
if(GasMischanteil >= EE_Parameter.Hoehe_MinGas) hoehenregler = EE_Parameter.Hoehe_MinGas; |
if(GasMischanteil < EE_Parameter.Hoehe_MinGas) hoehenregler = GasMischanteil; |
} |
if(hoehenregler > GasMischanteil) hoehenregler = GasMischanteil; // nicht mehr als Gas |
GasMischanteil = hoehenregler; |
} |
} |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Mischer und PI-Regler |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
|
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Gier-Anteil |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
GierMischanteil = MesswertGier - sollGier; // Regler für Gier |
if(GierMischanteil > 100) GierMischanteil = 100; |
if(GierMischanteil < -100) GierMischanteil = -100; |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Nick-Achse |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
DiffNick = Kp * (MesswertNick - (StickNick - GPS_Nick)); // Differenz bestimmen |
SummeNick += DiffNick; // I-Anteil |
if(SummeNick > 0) SummeNick-= (abs(SummeNick)/256 + 1); else SummeNick += abs(SummeNick)/256 + 1; |
if(SummeNick > 16000) SummeNick = 16000; |
if(SummeNick < -16000) SummeNick = -16000; |
pd_ergebnis = DiffNick + Ki * SummeNick; // PI-Regler für Nick |
// Motor Vorn |
motorwert = GasMischanteil + pd_ergebnis + GierMischanteil; // Mischer |
if ((motorwert < 0) | (GasMischanteil < 10)) motorwert = 0; |
else if(motorwert > MAX_GAS) motorwert = MAX_GAS; |
if (motorwert < MIN_GAS) motorwert = MIN_GAS; |
Motor_Vorne = motorwert; |
// Motor Heck |
motorwert = GasMischanteil - pd_ergebnis + GierMischanteil; |
if ((motorwert < 0) | (GasMischanteil < 10)) motorwert = 0; |
else if(motorwert > MAX_GAS) motorwert = MAX_GAS; |
if (motorwert < MIN_GAS) motorwert = MIN_GAS; |
Motor_Hinten = motorwert; |
|
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Roll-Achse |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
DiffRoll = Kp * (MesswertRoll - (StickRoll - GPS_Roll)); // Differenz bestimmen |
SummeRoll += DiffRoll; // I-Anteil |
if(SummeRoll > 0) SummeRoll-= (abs(SummeRoll)/256 + 1); else SummeRoll += abs(SummeRoll)/256 + 1; |
if(SummeRoll > 16000) SummeRoll = 16000; |
if(SummeRoll < -16000) SummeRoll = -16000; |
pd_ergebnis = DiffRoll + Ki * SummeRoll; // PI-Regler für Roll |
// Motor Links |
motorwert = GasMischanteil + pd_ergebnis - GierMischanteil; |
if ((motorwert < 0) | (GasMischanteil < 10)) motorwert = 0; |
else if(motorwert > MAX_GAS) motorwert = MAX_GAS; |
if (motorwert < MIN_GAS) motorwert = MIN_GAS; |
Motor_Links = motorwert; |
// Motor Rechts |
motorwert = GasMischanteil - pd_ergebnis - GierMischanteil; |
if ((motorwert < 0) | (GasMischanteil < 10)) motorwert = 0; |
else if(motorwert > MAX_GAS) motorwert = MAX_GAS; |
if (motorwert < MIN_GAS) motorwert = MIN_GAS; |
Motor_Rechts = motorwert; |
// +++++++++++++++++++++++++++++++++++++++++++++++ |
|
} |
|