/branches/v0.60_MicroMag3_Nick666/V0.67g/COPYING |
---|
0,0 → 1,674 |
GNU GENERAL PUBLIC LICENSE |
Version 3, 29 June 2007 |
Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/> |
Everyone is permitted to copy and distribute verbatim copies |
of this license document, but changing it is not allowed. |
Preamble |
The GNU General Public License is a free, copyleft license for |
software and other kinds of works. |
The licenses for most software and other practical works are designed |
to take away your freedom to share and change the works. By contrast, |
the GNU General Public License is intended to guarantee your freedom to |
share and change all versions of a program--to make sure it remains free |
software for all its users. We, the Free Software Foundation, use the |
GNU General Public License for most of our software; it applies also to |
any other work released this way by its authors. You can apply it to |
your programs, too. |
When we speak of free software, we are referring to freedom, not |
price. Our General Public Licenses are designed to make sure that you |
have the freedom to distribute copies of free software (and charge for |
them if you wish), that you receive source code or can get it if you |
want it, that you can change the software or use pieces of it in new |
free programs, and that you know you can do these things. |
To protect your rights, we need to prevent others from denying you |
these rights or asking you to surrender the rights. Therefore, you have |
certain responsibilities if you distribute copies of the software, or if |
you modify it: responsibilities to respect the freedom of others. |
For example, if you distribute copies of such a program, whether |
gratis or for a fee, you must pass on to the recipients the same |
freedoms that you received. You must make sure that they, too, receive |
or can get the source code. And you must show them these terms so they |
know their rights. |
Developers that use the GNU GPL protect your rights with two steps: |
(1) assert copyright on the software, and (2) offer you this License |
giving you legal permission to copy, distribute and/or modify it. |
For the developers' and authors' protection, the GPL clearly explains |
that there is no warranty for this free software. For both users' and |
authors' sake, the GPL requires that modified versions be marked as |
changed, so that their problems will not be attributed erroneously to |
authors of previous versions. |
Some devices are designed to deny users access to install or run |
modified versions of the software inside them, although the manufacturer |
can do so. This is fundamentally incompatible with the aim of |
protecting users' freedom to change the software. The systematic |
pattern of such abuse occurs in the area of products for individuals to |
use, which is precisely where it is most unacceptable. Therefore, we |
have designed this version of the GPL to prohibit the practice for those |
products. If such problems arise substantially in other domains, we |
stand ready to extend this provision to those domains in future versions |
of the GPL, as needed to protect the freedom of users. |
Finally, every program is threatened constantly by software patents. |
States should not allow patents to restrict development and use of |
software on general-purpose computers, but in those that do, we wish to |
avoid the special danger that patents applied to a free program could |
make it effectively proprietary. To prevent this, the GPL assures that |
patents cannot be used to render the program non-free. |
The precise terms and conditions for copying, distribution and |
modification follow. |
TERMS AND CONDITIONS |
0. Definitions. |
"This License" refers to version 3 of the GNU General Public License. |
"Copyright" also means copyright-like laws that apply to other kinds of |
works, such as semiconductor masks. |
"The Program" refers to any copyrightable work licensed under this |
License. Each licensee is addressed as "you". "Licensees" and |
"recipients" may be individuals or organizations. |
To "modify" a work means to copy from or adapt all or part of the work |
in a fashion requiring copyright permission, other than the making of an |
exact copy. The resulting work is called a "modified version" of the |
earlier work or a work "based on" the earlier work. |
A "covered work" means either the unmodified Program or a work based |
on the Program. |
To "propagate" a work means to do anything with it that, without |
permission, would make you directly or secondarily liable for |
infringement under applicable copyright law, except executing it on a |
computer or modifying a private copy. Propagation includes copying, |
distribution (with or without modification), making available to the |
public, and in some countries other activities as well. |
To "convey" a work means any kind of propagation that enables other |
parties to make or receive copies. Mere interaction with a user through |
a computer network, with no transfer of a copy, is not conveying. |
An interactive user interface displays "Appropriate Legal Notices" |
to the extent that it includes a convenient and prominently visible |
feature that (1) displays an appropriate copyright notice, and (2) |
tells the user that there is no warranty for the work (except to the |
extent that warranties are provided), that licensees may convey the |
work under this License, and how to view a copy of this License. If |
the interface presents a list of user commands or options, such as a |
menu, a prominent item in the list meets this criterion. |
1. Source Code. |
The "source code" for a work means the preferred form of the work |
for making modifications to it. "Object code" means any non-source |
form of a work. |
A "Standard Interface" means an interface that either is an official |
standard defined by a recognized standards body, or, in the case of |
interfaces specified for a particular programming language, one that |
is widely used among developers working in that language. |
The "System Libraries" of an executable work include anything, other |
than the work as a whole, that (a) is included in the normal form of |
packaging a Major Component, but which is not part of that Major |
Component, and (b) serves only to enable use of the work with that |
Major Component, or to implement a Standard Interface for which an |
implementation is available to the public in source code form. A |
"Major Component", in this context, means a major essential component |
(kernel, window system, and so on) of the specific operating system |
(if any) on which the executable work runs, or a compiler used to |
produce the work, or an object code interpreter used to run it. |
The "Corresponding Source" for a work in object code form means all |
the source code needed to generate, install, and (for an executable |
work) run the object code and to modify the work, including scripts to |
control those activities. However, it does not include the work's |
System Libraries, or general-purpose tools or generally available free |
programs which are used unmodified in performing those activities but |
which are not part of the work. For example, Corresponding Source |
includes interface definition files associated with source files for |
the work, and the source code for shared libraries and dynamically |
linked subprograms that the work is specifically designed to require, |
such as by intimate data communication or control flow between those |
subprograms and other parts of the work. |
The Corresponding Source need not include anything that users |
can regenerate automatically from other parts of the Corresponding |
Source. |
The Corresponding Source for a work in source code form is that |
same work. |
2. Basic Permissions. |
All rights granted under this License are granted for the term of |
copyright on the Program, and are irrevocable provided the stated |
conditions are met. This License explicitly affirms your unlimited |
permission to run the unmodified Program. The output from running a |
covered work is covered by this License only if the output, given its |
content, constitutes a covered work. This License acknowledges your |
rights of fair use or other equivalent, as provided by copyright law. |
You may make, run and propagate covered works that you do not |
convey, without conditions so long as your license otherwise remains |
in force. You may convey covered works to others for the sole purpose |
of having them make modifications exclusively for you, or provide you |
with facilities for running those works, provided that you comply with |
the terms of this License in conveying all material for which you do |
not control copyright. Those thus making or running the covered works |
for you must do so exclusively on your behalf, under your direction |
and control, on terms that prohibit them from making any copies of |
your copyrighted material outside their relationship with you. |
Conveying under any other circumstances is permitted solely under |
the conditions stated below. Sublicensing is not allowed; section 10 |
makes it unnecessary. |
3. Protecting Users' Legal Rights From Anti-Circumvention Law. |
No covered work shall be deemed part of an effective technological |
measure under any applicable law fulfilling obligations under article |
11 of the WIPO copyright treaty adopted on 20 December 1996, or |
similar laws prohibiting or restricting circumvention of such |
measures. |
When you convey a covered work, you waive any legal power to forbid |
circumvention of technological measures to the extent such circumvention |
is effected by exercising rights under this License with respect to |
the covered work, and you disclaim any intention to limit operation or |
modification of the work as a means of enforcing, against the work's |
users, your or third parties' legal rights to forbid circumvention of |
technological measures. |
4. Conveying Verbatim Copies. |
You may convey verbatim copies of the Program's source code as you |
receive it, in any medium, provided that you conspicuously and |
appropriately publish on each copy an appropriate copyright notice; |
keep intact all notices stating that this License and any |
non-permissive terms added in accord with section 7 apply to the code; |
keep intact all notices of the absence of any warranty; and give all |
recipients a copy of this License along with the Program. |
You may charge any price or no price for each copy that you convey, |
and you may offer support or warranty protection for a fee. |
5. Conveying Modified Source Versions. |
You may convey a work based on the Program, or the modifications to |
produce it from the Program, in the form of source code under the |
terms of section 4, provided that you also meet all of these conditions: |
a) The work must carry prominent notices stating that you modified |
it, and giving a relevant date. |
b) The work must carry prominent notices stating that it is |
released under this License and any conditions added under section |
7. This requirement modifies the requirement in section 4 to |
"keep intact all notices". |
c) You must license the entire work, as a whole, under this |
License to anyone who comes into possession of a copy. This |
License will therefore apply, along with any applicable section 7 |
additional terms, to the whole of the work, and all its parts, |
regardless of how they are packaged. This License gives no |
permission to license the work in any other way, but it does not |
invalidate such permission if you have separately received it. |
d) If the work has interactive user interfaces, each must display |
Appropriate Legal Notices; however, if the Program has interactive |
interfaces that do not display Appropriate Legal Notices, your |
work need not make them do so. |
A compilation of a covered work with other separate and independent |
works, which are not by their nature extensions of the covered work, |
and which are not combined with it such as to form a larger program, |
in or on a volume of a storage or distribution medium, is called an |
"aggregate" if the compilation and its resulting copyright are not |
used to limit the access or legal rights of the compilation's users |
beyond what the individual works permit. Inclusion of a covered work |
in an aggregate does not cause this License to apply to the other |
parts of the aggregate. |
6. Conveying Non-Source Forms. |
You may convey a covered work in object code form under the terms |
of sections 4 and 5, provided that you also convey the |
machine-readable Corresponding Source under the terms of this License, |
in one of these ways: |
a) Convey the object code in, or embodied in, a physical product |
(including a physical distribution medium), accompanied by the |
Corresponding Source fixed on a durable physical medium |
customarily used for software interchange. |
b) Convey the object code in, or embodied in, a physical product |
(including a physical distribution medium), accompanied by a |
written offer, valid for at least three years and valid for as |
long as you offer spare parts or customer support for that product |
model, to give anyone who possesses the object code either (1) a |
copy of the Corresponding Source for all the software in the |
product that is covered by this License, on a durable physical |
medium customarily used for software interchange, for a price no |
more than your reasonable cost of physically performing this |
conveying of source, or (2) access to copy the |
Corresponding Source from a network server at no charge. |
c) Convey individual copies of the object code with a copy of the |
written offer to provide the Corresponding Source. This |
alternative is allowed only occasionally and noncommercially, and |
only if you received the object code with such an offer, in accord |
with subsection 6b. |
d) Convey the object code by offering access from a designated |
place (gratis or for a charge), and offer equivalent access to the |
Corresponding Source in the same way through the same place at no |
further charge. You need not require recipients to copy the |
Corresponding Source along with the object code. If the place to |
copy the object code is a network server, the Corresponding Source |
may be on a different server (operated by you or a third party) |
that supports equivalent copying facilities, provided you maintain |
clear directions next to the object code saying where to find the |
Corresponding Source. Regardless of what server hosts the |
Corresponding Source, you remain obligated to ensure that it is |
available for as long as needed to satisfy these requirements. |
e) Convey the object code using peer-to-peer transmission, provided |
you inform other peers where the object code and Corresponding |
Source of the work are being offered to the general public at no |
charge under subsection 6d. |
A separable portion of the object code, whose source code is excluded |
from the Corresponding Source as a System Library, need not be |
included in conveying the object code work. |
A "User Product" is either (1) a "consumer product", which means any |
tangible personal property which is normally used for personal, family, |
or household purposes, or (2) anything designed or sold for incorporation |
into a dwelling. In determining whether a product is a consumer product, |
doubtful cases shall be resolved in favor of coverage. For a particular |
product received by a particular user, "normally used" refers to a |
typical or common use of that class of product, regardless of the status |
of the particular user or of the way in which the particular user |
actually uses, or expects or is expected to use, the product. A product |
is a consumer product regardless of whether the product has substantial |
commercial, industrial or non-consumer uses, unless such uses represent |
the only significant mode of use of the product. |
"Installation Information" for a User Product means any methods, |
procedures, authorization keys, or other information required to install |
and execute modified versions of a covered work in that User Product from |
a modified version of its Corresponding Source. The information must |
suffice to ensure that the continued functioning of the modified object |
code is in no case prevented or interfered with solely because |
modification has been made. |
If you convey an object code work under this section in, or with, or |
specifically for use in, a User Product, and the conveying occurs as |
part of a transaction in which the right of possession and use of the |
User Product is transferred to the recipient in perpetuity or for a |
fixed term (regardless of how the transaction is characterized), the |
Corresponding Source conveyed under this section must be accompanied |
by the Installation Information. But this requirement does not apply |
if neither you nor any third party retains the ability to install |
modified object code on the User Product (for example, the work has |
been installed in ROM). |
The requirement to provide Installation Information does not include a |
requirement to continue to provide support service, warranty, or updates |
for a work that has been modified or installed by the recipient, or for |
the User Product in which it has been modified or installed. Access to a |
network may be denied when the modification itself materially and |
adversely affects the operation of the network or violates the rules and |
protocols for communication across the network. |
Corresponding Source conveyed, and Installation Information provided, |
in accord with this section must be in a format that is publicly |
documented (and with an implementation available to the public in |
source code form), and must require no special password or key for |
unpacking, reading or copying. |
7. Additional Terms. |
"Additional permissions" are terms that supplement the terms of this |
License by making exceptions from one or more of its conditions. |
Additional permissions that are applicable to the entire Program shall |
be treated as though they were included in this License, to the extent |
that they are valid under applicable law. If additional permissions |
apply only to part of the Program, that part may be used separately |
under those permissions, but the entire Program remains governed by |
this License without regard to the additional permissions. |
When you convey a copy of a covered work, you may at your option |
remove any additional permissions from that copy, or from any part of |
it. (Additional permissions may be written to require their own |
removal in certain cases when you modify the work.) You may place |
additional permissions on material, added by you to a covered work, |
for which you have or can give appropriate copyright permission. |
Notwithstanding any other provision of this License, for material you |
add to a covered work, you may (if authorized by the copyright holders of |
that material) supplement the terms of this License with terms: |
a) Disclaiming warranty or limiting liability differently from the |
terms of sections 15 and 16 of this License; or |
b) Requiring preservation of specified reasonable legal notices or |
author attributions in that material or in the Appropriate Legal |
Notices displayed by works containing it; or |
c) Prohibiting misrepresentation of the origin of that material, or |
requiring that modified versions of such material be marked in |
reasonable ways as different from the original version; or |
d) Limiting the use for publicity purposes of names of licensors or |
authors of the material; or |
e) Declining to grant rights under trademark law for use of some |
trade names, trademarks, or service marks; or |
f) Requiring indemnification of licensors and authors of that |
material by anyone who conveys the material (or modified versions of |
it) with contractual assumptions of liability to the recipient, for |
any liability that these contractual assumptions directly impose on |
those licensors and authors. |
All other non-permissive additional terms are considered "further |
restrictions" within the meaning of section 10. If the Program as you |
received it, or any part of it, contains a notice stating that it is |
governed by this License along with a term that is a further |
restriction, you may remove that term. If a license document contains |
a further restriction but permits relicensing or conveying under this |
License, you may add to a covered work material governed by the terms |
of that license document, provided that the further restriction does |
not survive such relicensing or conveying. |
If you add terms to a covered work in accord with this section, you |
must place, in the relevant source files, a statement of the |
additional terms that apply to those files, or a notice indicating |
where to find the applicable terms. |
Additional terms, permissive or non-permissive, may be stated in the |
form of a separately written license, or stated as exceptions; |
the above requirements apply either way. |
8. Termination. |
You may not propagate or modify a covered work except as expressly |
provided under this License. Any attempt otherwise to propagate or |
modify it is void, and will automatically terminate your rights under |
this License (including any patent licenses granted under the third |
paragraph of section 11). |
However, if you cease all violation of this License, then your |
license from a particular copyright holder is reinstated (a) |
provisionally, unless and until the copyright holder explicitly and |
finally terminates your license, and (b) permanently, if the copyright |
holder fails to notify you of the violation by some reasonable means |
prior to 60 days after the cessation. |
Moreover, your license from a particular copyright holder is |
reinstated permanently if the copyright holder notifies you of the |
violation by some reasonable means, this is the first time you have |
received notice of violation of this License (for any work) from that |
copyright holder, and you cure the violation prior to 30 days after |
your receipt of the notice. |
Termination of your rights under this section does not terminate the |
licenses of parties who have received copies or rights from you under |
this License. If your rights have been terminated and not permanently |
reinstated, you do not qualify to receive new licenses for the same |
material under section 10. |
9. Acceptance Not Required for Having Copies. |
You are not required to accept this License in order to receive or |
run a copy of the Program. Ancillary propagation of a covered work |
occurring solely as a consequence of using peer-to-peer transmission |
to receive a copy likewise does not require acceptance. However, |
nothing other than this License grants you permission to propagate or |
modify any covered work. These actions infringe copyright if you do |
not accept this License. Therefore, by modifying or propagating a |
covered work, you indicate your acceptance of this License to do so. |
10. Automatic Licensing of Downstream Recipients. |
Each time you convey a covered work, the recipient automatically |
receives a license from the original licensors, to run, modify and |
propagate that work, subject to this License. You are not responsible |
for enforcing compliance by third parties with this License. |
An "entity transaction" is a transaction transferring control of an |
organization, or substantially all assets of one, or subdividing an |
organization, or merging organizations. If propagation of a covered |
work results from an entity transaction, each party to that |
transaction who receives a copy of the work also receives whatever |
licenses to the work the party's predecessor in interest had or could |
give under the previous paragraph, plus a right to possession of the |
Corresponding Source of the work from the predecessor in interest, if |
the predecessor has it or can get it with reasonable efforts. |
You may not impose any further restrictions on the exercise of the |
rights granted or affirmed under this License. For example, you may |
not impose a license fee, royalty, or other charge for exercise of |
rights granted under this License, and you may not initiate litigation |
(including a cross-claim or counterclaim in a lawsuit) alleging that |
any patent claim is infringed by making, using, selling, offering for |
sale, or importing the Program or any portion of it. |
11. Patents. |
A "contributor" is a copyright holder who authorizes use under this |
License of the Program or a work on which the Program is based. The |
work thus licensed is called the contributor's "contributor version". |
A contributor's "essential patent claims" are all patent claims |
owned or controlled by the contributor, whether already acquired or |
hereafter acquired, that would be infringed by some manner, permitted |
by this License, of making, using, or selling its contributor version, |
but do not include claims that would be infringed only as a |
consequence of further modification of the contributor version. For |
purposes of this definition, "control" includes the right to grant |
patent sublicenses in a manner consistent with the requirements of |
this License. |
Each contributor grants you a non-exclusive, worldwide, royalty-free |
patent license under the contributor's essential patent claims, to |
make, use, sell, offer for sale, import and otherwise run, modify and |
propagate the contents of its contributor version. |
In the following three paragraphs, a "patent license" is any express |
agreement or commitment, however denominated, not to enforce a patent |
(such as an express permission to practice a patent or covenant not to |
sue for patent infringement). To "grant" such a patent license to a |
party means to make such an agreement or commitment not to enforce a |
patent against the party. |
If you convey a covered work, knowingly relying on a patent license, |
and the Corresponding Source of the work is not available for anyone |
to copy, free of charge and under the terms of this License, through a |
publicly available network server or other readily accessible means, |
then you must either (1) cause the Corresponding Source to be so |
available, or (2) arrange to deprive yourself of the benefit of the |
patent license for this particular work, or (3) arrange, in a manner |
consistent with the requirements of this License, to extend the patent |
license to downstream recipients. "Knowingly relying" means you have |
actual knowledge that, but for the patent license, your conveying the |
covered work in a country, or your recipient's use of the covered work |
in a country, would infringe one or more identifiable patents in that |
country that you have reason to believe are valid. |
If, pursuant to or in connection with a single transaction or |
arrangement, you convey, or propagate by procuring conveyance of, a |
covered work, and grant a patent license to some of the parties |
receiving the covered work authorizing them to use, propagate, modify |
or convey a specific copy of the covered work, then the patent license |
you grant is automatically extended to all recipients of the covered |
work and works based on it. |
A patent license is "discriminatory" if it does not include within |
the scope of its coverage, prohibits the exercise of, or is |
conditioned on the non-exercise of one or more of the rights that are |
specifically granted under this License. You may not convey a covered |
work if you are a party to an arrangement with a third party that is |
in the business of distributing software, under which you make payment |
to the third party based on the extent of your activity of conveying |
the work, and under which the third party grants, to any of the |
parties who would receive the covered work from you, a discriminatory |
patent license (a) in connection with copies of the covered work |
conveyed by you (or copies made from those copies), or (b) primarily |
for and in connection with specific products or compilations that |
contain the covered work, unless you entered into that arrangement, |
or that patent license was granted, prior to 28 March 2007. |
Nothing in this License shall be construed as excluding or limiting |
any implied license or other defenses to infringement that may |
otherwise be available to you under applicable patent law. |
12. No Surrender of Others' Freedom. |
If conditions are imposed on you (whether by court order, agreement or |
otherwise) that contradict the conditions of this License, they do not |
excuse you from the conditions of this License. If you cannot convey a |
covered work so as to satisfy simultaneously your obligations under this |
License and any other pertinent obligations, then as a consequence you may |
not convey it at all. For example, if you agree to terms that obligate you |
to collect a royalty for further conveying from those to whom you convey |
the Program, the only way you could satisfy both those terms and this |
License would be to refrain entirely from conveying the Program. |
13. Use with the GNU Affero General Public License. |
Notwithstanding any other provision of this License, you have |
permission to link or combine any covered work with a work licensed |
under version 3 of the GNU Affero General Public License into a single |
combined work, and to convey the resulting work. The terms of this |
License will continue to apply to the part which is the covered work, |
but the special requirements of the GNU Affero General Public License, |
section 13, concerning interaction through a network will apply to the |
combination as such. |
14. Revised Versions of this License. |
The Free Software Foundation may publish revised and/or new versions of |
the GNU General Public License from time to time. Such new versions will |
be similar in spirit to the present version, but may differ in detail to |
address new problems or concerns. |
Each version is given a distinguishing version number. If the |
Program specifies that a certain numbered version of the GNU General |
Public License "or any later version" applies to it, you have the |
option of following the terms and conditions either of that numbered |
version or of any later version published by the Free Software |
Foundation. If the Program does not specify a version number of the |
GNU General Public License, you may choose any version ever published |
by the Free Software Foundation. |
If the Program specifies that a proxy can decide which future |
versions of the GNU General Public License can be used, that proxy's |
public statement of acceptance of a version permanently authorizes you |
to choose that version for the Program. |
Later license versions may give you additional or different |
permissions. However, no additional obligations are imposed on any |
author or copyright holder as a result of your choosing to follow a |
later version. |
15. Disclaimer of Warranty. |
THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY |
APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT |
HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY |
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, |
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR |
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM |
IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF |
ALL NECESSARY SERVICING, REPAIR OR CORRECTION. |
16. Limitation of Liability. |
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING |
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS |
THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY |
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE |
USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF |
DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD |
PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), |
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF |
SUCH DAMAGES. |
17. Interpretation of Sections 15 and 16. |
If the disclaimer of warranty and limitation of liability provided |
above cannot be given local legal effect according to their terms, |
reviewing courts shall apply local law that most closely approximates |
an absolute waiver of all civil liability in connection with the |
Program, unless a warranty or assumption of liability accompanies a |
copy of the Program in return for a fee. |
END OF TERMS AND CONDITIONS |
How to Apply These Terms to Your New Programs |
If you develop a new program, and you want it to be of the greatest |
possible use to the public, the best way to achieve this is to make it |
free software which everyone can redistribute and change under these terms. |
To do so, attach the following notices to the program. It is safest |
to attach them to the start of each source file to most effectively |
state the exclusion of warranty; and each file should have at least |
the "copyright" line and a pointer to where the full notice is found. |
<one line to give the program's name and a brief idea of what it does.> |
Copyright (C) <year> <name of author> |
This program is free software: you can redistribute it and/or modify |
it under the terms of the GNU General Public License as published by |
the Free Software Foundation, either version 3 of the License, or |
(at your option) any later version. |
This program is distributed in the hope that it will be useful, |
but WITHOUT ANY WARRANTY; without even the implied warranty of |
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
GNU General Public License for more details. |
You should have received a copy of the GNU General Public License |
along with this program. If not, see <http://www.gnu.org/licenses/>. |
Also add information on how to contact you by electronic and paper mail. |
If the program does terminal interaction, make it output a short |
notice like this when it starts in an interactive mode: |
<program> Copyright (C) <year> <name of author> |
This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. |
This is free software, and you are welcome to redistribute it |
under certain conditions; type `show c' for details. |
The hypothetical commands `show w' and `show c' should show the appropriate |
parts of the General Public License. Of course, your program's commands |
might be different; for a GUI interface, you would use an "about box". |
You should also get your employer (if you work as a programmer) or school, |
if any, to sign a "copyright disclaimer" for the program, if necessary. |
For more information on this, and how to apply and follow the GNU GPL, see |
<http://www.gnu.org/licenses/>. |
The GNU General Public License does not permit incorporating your program |
into proprietary programs. If your program is a subroutine library, you |
may consider it more useful to permit linking proprietary applications with |
the library. If this is what you want to do, use the GNU Lesser General |
Public License instead of this License. But first, please read |
<http://www.gnu.org/philosophy/why-not-lgpl.html>. |
/branches/v0.60_MicroMag3_Nick666/V0.67g/COPYING.LESSER |
---|
0,0 → 1,165 |
GNU LESSER GENERAL PUBLIC LICENSE |
Version 3, 29 June 2007 |
Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/> |
Everyone is permitted to copy and distribute verbatim copies |
of this license document, but changing it is not allowed. |
This version of the GNU Lesser General Public License incorporates |
the terms and conditions of version 3 of the GNU General Public |
License, supplemented by the additional permissions listed below. |
0. Additional Definitions. |
As used herein, "this License" refers to version 3 of the GNU Lesser |
General Public License, and the "GNU GPL" refers to version 3 of the GNU |
General Public License. |
"The Library" refers to a covered work governed by this License, |
other than an Application or a Combined Work as defined below. |
An "Application" is any work that makes use of an interface provided |
by the Library, but which is not otherwise based on the Library. |
Defining a subclass of a class defined by the Library is deemed a mode |
of using an interface provided by the Library. |
A "Combined Work" is a work produced by combining or linking an |
Application with the Library. The particular version of the Library |
with which the Combined Work was made is also called the "Linked |
Version". |
The "Minimal Corresponding Source" for a Combined Work means the |
Corresponding Source for the Combined Work, excluding any source code |
for portions of the Combined Work that, considered in isolation, are |
based on the Application, and not on the Linked Version. |
The "Corresponding Application Code" for a Combined Work means the |
object code and/or source code for the Application, including any data |
and utility programs needed for reproducing the Combined Work from the |
Application, but excluding the System Libraries of the Combined Work. |
1. Exception to Section 3 of the GNU GPL. |
You may convey a covered work under sections 3 and 4 of this License |
without being bound by section 3 of the GNU GPL. |
2. Conveying Modified Versions. |
If you modify a copy of the Library, and, in your modifications, a |
facility refers to a function or data to be supplied by an Application |
that uses the facility (other than as an argument passed when the |
facility is invoked), then you may convey a copy of the modified |
version: |
a) under this License, provided that you make a good faith effort to |
ensure that, in the event an Application does not supply the |
function or data, the facility still operates, and performs |
whatever part of its purpose remains meaningful, or |
b) under the GNU GPL, with none of the additional permissions of |
this License applicable to that copy. |
3. Object Code Incorporating Material from Library Header Files. |
The object code form of an Application may incorporate material from |
a header file that is part of the Library. You may convey such object |
code under terms of your choice, provided that, if the incorporated |
material is not limited to numerical parameters, data structure |
layouts and accessors, or small macros, inline functions and templates |
(ten or fewer lines in length), you do both of the following: |
a) Give prominent notice with each copy of the object code that the |
Library is used in it and that the Library and its use are |
covered by this License. |
b) Accompany the object code with a copy of the GNU GPL and this license |
document. |
4. Combined Works. |
You may convey a Combined Work under terms of your choice that, |
taken together, effectively do not restrict modification of the |
portions of the Library contained in the Combined Work and reverse |
engineering for debugging such modifications, if you also do each of |
the following: |
a) Give prominent notice with each copy of the Combined Work that |
the Library is used in it and that the Library and its use are |
covered by this License. |
b) Accompany the Combined Work with a copy of the GNU GPL and this license |
document. |
c) For a Combined Work that displays copyright notices during |
execution, include the copyright notice for the Library among |
these notices, as well as a reference directing the user to the |
copies of the GNU GPL and this license document. |
d) Do one of the following: |
0) Convey the Minimal Corresponding Source under the terms of this |
License, and the Corresponding Application Code in a form |
suitable for, and under terms that permit, the user to |
recombine or relink the Application with a modified version of |
the Linked Version to produce a modified Combined Work, in the |
manner specified by section 6 of the GNU GPL for conveying |
Corresponding Source. |
1) Use a suitable shared library mechanism for linking with the |
Library. A suitable mechanism is one that (a) uses at run time |
a copy of the Library already present on the user's computer |
system, and (b) will operate properly with a modified version |
of the Library that is interface-compatible with the Linked |
Version. |
e) Provide Installation Information, but only if you would otherwise |
be required to provide such information under section 6 of the |
GNU GPL, and only to the extent that such information is |
necessary to install and execute a modified version of the |
Combined Work produced by recombining or relinking the |
Application with a modified version of the Linked Version. (If |
you use option 4d0, the Installation Information must accompany |
the Minimal Corresponding Source and Corresponding Application |
Code. If you use option 4d1, you must provide the Installation |
Information in the manner specified by section 6 of the GNU GPL |
for conveying Corresponding Source.) |
5. Combined Libraries. |
You may place library facilities that are a work based on the |
Library side by side in a single library together with other library |
facilities that are not Applications and are not covered by this |
License, and convey such a combined library under terms of your |
choice, if you do both of the following: |
a) Accompany the combined library with a copy of the same work based |
on the Library, uncombined with any other library facilities, |
conveyed under the terms of this License. |
b) Give prominent notice with the combined library that part of it |
is a work based on the Library, and explaining where to find the |
accompanying uncombined form of the same work. |
6. Revised Versions of the GNU Lesser General Public License. |
The Free Software Foundation may publish revised and/or new versions |
of the GNU Lesser General Public License from time to time. Such new |
versions will be similar in spirit to the present version, but may |
differ in detail to address new problems or concerns. |
Each version is given a distinguishing version number. If the |
Library as you received it specifies that a certain numbered version |
of the GNU Lesser General Public License "or any later version" |
applies to it, you have the option of following the terms and |
conditions either of that published version or of any later version |
published by the Free Software Foundation. If the Library as you |
received it does not specify a version number of the GNU Lesser |
General Public License, you may choose any version of the GNU Lesser |
General Public License ever published by the Free Software Foundation. |
If the Library as you received it specifies that a proxy can decide |
whether future versions of the GNU Lesser General Public License shall |
apply, that proxy's public statement of acceptance of any version is |
permanent authorization for you to choose that version for the |
Library. |
/branches/v0.60_MicroMag3_Nick666/V0.67g/Flight-Ctrl_MEGA644_V0_67g.hex |
---|
0,0 → 1,2005 |
:100000000C94C3030C94E0030C94E0030C94E00301 |
:100010000C94E0030C94E0030C94E0030C94E003D4 |
:100020000C94E0030C94E40C0C94E0030C94E003B7 |
:100030000C9442160C94E0030C94E0030C94E0033F |
:100040000C94E0030C94E0030C94870D0C94173788 |
:100050000C9488060C94E0030C9452060C94E00374 |
:100060000C942F0E0C94E0030C9480150C94E00378 |
:100070002109D9092D09D909D909D9096F094009D7 |
:10008000D909D90962099B099B099B099B099B090D |
:100090007309D909D9095B09D9096B09590E6E0E83 |
:1000A000770E810E9E0EB60ECF0EEC0E090F260FA8 |
:1000B000F40F3E118611E7113D1291121513BC1376 |
:1000C000121436146C14A814E6141F1599159E15F5 |
:1000D000AF15BD15CA15C215CA15DE150A0A0D00E1 |
:1000E0004E65757472616C0048656164696E67483D |
:1000F0006F6C64000A0D537465756572756E673AAE |
:1001000020004F4B0A0D000A0D4162676C65696360 |
:1001100068204C756674647275636B73656E736F7B |
:10012000722E2E000A0D4B616C69627269657265F0 |
:10013000204B6F6D70617373000A0D42656E7574AC |
:100140007A6520506172616D657465727361747A4D |
:10015000202564000A0D414343206E6963687420C2 |
:1001600061626765676C696368656E21000A0D49A5 |
:100170006E69742E20454550524F4D3A2047656EAA |
:100180006572696572652044656661756C742D5091 |
:100190006172616D657465722E2E2E000A0D3D3DF3 |
:1001A0003D3D3D3D3D3D3D3D3D3D3D3D3D3D3D3D7F |
:1001B0003D3D3D3D3D3D3D3D3D3D3D3D000A0D4606 |
:1001C0006C69676874436F6E74726F6C0A0D486176 |
:1001D0007264776172653A25642E25640A0D536F47 |
:1001E0006674776172653A5625642E25642563200E |
:1001F000002E005A5F52616E67653A2020253469EF |
:1002000000595F52616E67653A20202534690058B5 |
:100210005F52616E67653A2020253469004D4D3389 |
:100220002052616E6765005A5F4F66667365743A67 |
:10023000202025336900595F4F66667365743A2044 |
:100240002025336900585F4F66667365743A202035 |
:10025000253369004D4D33204F66660052616E674D |
:10026000653A2533692D253369005374656C6C75C7 |
:100270006E673A2025336900536574706F696E7438 |
:10028000202025336900536572766F202000506F5F |
:100290007469343A202025336900506F7469333A09 |
:1002A000202025336900506F7469323A20202533AD |
:1002B0006900506F7469313A202025336900537406 |
:1002C0006172743A2020202020253569004D657325 |
:1002D00073776572743A2020253569005269636826 |
:1002E00074756E673A2020253569004B6F6D70611B |
:1002F00073732020202020202000456D70662E5032 |
:100300006567656C3A253569005370616E6E756E70 |
:10031000673A202025356900486F636820253469D5 |
:1003200020282533692900526F6C6C202534692000 |
:100330002825336929004E69636B202534692028FC |
:100340002533692900414343202D2053656E736F87 |
:100350007200476965722025346920282533692990 |
:1003600000526F6C6C2025346920282533692900E0 |
:100370004E69636B2025346920282533692900479D |
:100380006965722025346920282533692900526F58 |
:100390006C6C20253469202825336929004E696357 |
:1003A0006B20253469202825336929004779726F2D |
:1003B000202D2053656E736F720050333A253469D7 |
:1003C000202050343A253469200050313A253469D0 |
:1003D000202050323A253469200047733A25346989 |
:1003E000202047693A25346920004E693A2534694E |
:1003F0002020526F3A25346920004B373A25346962 |
:1004000020204B383A25346920004B353A25346991 |
:1004100020204B363A25346920004B333A25346985 |
:1004200020204B343A25346920004B313A25346979 |
:1004300020204B323A25346920004B6F6D70617378 |
:10044000733A20202025356900526F6C6C3A2020C9 |
:1004500020202020253569004E69636B3A2020203A |
:1004600020202025356900616B742E204C61676562 |
:100470000048F668656E726567656C756E67004B5F |
:1004800065696E6520004F66662020202020203A96 |
:1004900020253569004C756674647275636B3A206B |
:1004A00025356900536F6C6C486F6568653A202587 |
:1004B000356900486F6568653A2020202020253581 |
:1004C000690028632920486F6C6765722042757344 |
:1004D000730053657474696E673A20256420004880 |
:1004E000573A5625642E25642053573A25642E2505 |
:1004F000642563002B2B204D696B726F4B6F7074FA |
:100500006572202B2B005B25695D0000010203054D |
:10051000060708090A0B0C0D0F10111213141516FB |
:100520001718191A1B1B1C1D1E1F202121222324F2 |
:1005300025252627272829292A2B2B2C2C2D2E2E22 |
:100540002F2F303031313232333334343435353685 |
:10055000363637373838383939393A3A3A3B3B3B0F |
:100560003C3C3C3C3D3D3D3D3E3E3E3E3F3F3F3FB3 |
:100570004040404041414141414242424242434366 |
:100580004343434344444444444445454545454529 |
:1005900045464646464646464647474747474747F5 |
:1005A00047484848484848484848494949494949C6 |
:1005B000494949494A4A4A4A4A4A4A4A4A4A4A4A9F |
:1005C0004B4B4B4B4B4B4B4B4B4B4B4B4B4C4C4C78 |
:1005D0004C4C4C4C4C4C4C4C4C4C4C4C4D4D4D4D57 |
:1005E0004D4D4D4D4D4D4D4D4D4D4D4D4D4E4E4E38 |
:1005F0004E4E4E4E4E4E4E4E4E4E4E4E4E4E4E4E1B |
:100600004E4F4F4F4F4F4F4F4F4F4F4F4F4F4F4FFB |
:100610004F4F4F4F4F4F4F4F4F0000000056F88E37 |
:100620003CC7F20E3D465E563D7FDC8E3DB07EB24D |
:100630003D0A13D63D9D96F93D65830E3E5E302002 |
:100640003ED5D0313E6F63433ECEE6543E8E596672 |
:100650003E60BA773EED83843E55208D3EBEB19517 |
:100660003E7A379E3EDDB0A63E421DAF3EFF7BB7D1 |
:100670003E70CCBF3EE80DC83EC83FD03E6A61D850 |
:100680003E2D72E03E7171E83E925EF03EF738F822 |
:100690003E0000003F89D9033FCBA8073F766D0B92 |
:1006A0003F44270F3FE7D5123F1779163F8C101AAA |
:1006B0003FFE9B1D3F241B213FBA8D243F7CF32727 |
:1006C0003F254C2B3F71972E3F22D5313FF4043507 |
:1006D0003FA726383FFF393B3FBD3E3E3FA6344152 |
:1006E0003F7C1B443F09F3463F12BB493F60734CBC |
:1006F0003FBD1B4F3FF2B3513FCF3B543F1EB3565C |
:100700003FAE19593F516F5B3FD7B35D3F14E75F71 |
:100710003FDB08623F0119643F5D17663FCA03680B |
:100720003F1DDE693F34A66B3FEB5B6D3F20FF6EE4 |
:100730003FB28F703F820D723F7078733F63D07409 |
:100740003F3F15763FEA46773F4D65783F527079D7 |
:100750003FE2677A3FEC4B7B3F5C1C7C3F24D97CBB |
:100760003F36827D3F80177E3FFD987E3F9E067F0D |
:100770003F5B607F3F2FA67F3F13D87F3F05F67F0B |
:100780003F0000803F0011241FBECFEFD0E1DEBF4D |
:10079000CDBF13E0A0E0B1E0E2E8FAE702C00590C7 |
:1007A0000D92A23AB107D9F717E0A2EAB3E001C06F |
:1007B0001D92A13CB107E1F70E9420040C94403D3A |
:1007C0000C94000022E030E0D9010E94223D802DEF |
:1007D000863028F082E0D901082E0E942F3D99270B |
:1007E0000895FB01863008F085E0282F2150842FE2 |
:1007F0009927A6E42A9FD0011124A65FBF4F019735 |
:1008000024F001900E942F3DFACFA2E0B0E0022E2A |
:100810000E942F3D0895FB01282F863008F025E027 |
:10082000842F99272150A6E42A9FD0011124A65F86 |
:10083000BF4F019724F00E94223D0192FACF089504 |
:100840001F93CF93DF9314B815B8189B02C08BE0A9 |
:1008500001C08AE08093000181E887B98FEF88B9F1 |
:100860008BE184B981E085B98EE38AB9579A87EF25 |
:100870008BB984B7877F84BF809160008861809343 |
:1008800060001092600080ED97E09093C103809328 |
:10089000C003109254041092530410920A0710924D |
:1008A00009071092520410925104109250041092B1 |
:1008B0004F04809100018A3011F4289801C0289AD1 |
:1008C0000E94B10C0E9458080E942D160E94290E09 |
:1008D0000E9466150E94BD3978941092080683E440 |
:1008E0008093090687E080930A062091000187E63D |
:1008F00090E09F938F9383E490E09F938F931F9258 |
:100900001F92822F6AE00E94753C892F99279F933E |
:100910008F93822F0E94753C99279F938F938DEB25 |
:1009200091E09F938F931F920E94380A8CE991E087 |
:100930009F938F931F920E94380A299AA1E0B0E0FA |
:100940000E94223D802D2DB73EB7205F3F4F2DBF27 |
:10095000843409F43FC08DE691E09F938F931F92FA |
:100960000E94380A0E94642310E00F900F900F90AD |
:10097000123049F40E94D22246E461E377E082E03B |
:100980000E94F10302C0133051F40E94412246E458 |
:1009900061E377E083E00E94F10314E002C01430C9 |
:1009A00010F00E94D22246E461E377E0812F0E949A |
:1009B000F1031F5F1630E0F283E022E030E0D9015E |
:1009C000082E0E942F3D84E421503040D901082E8A |
:1009D0000E942F3DC4E0D0E0DE010E94223D802D28 |
:1009E000853050F084E591E09F938F931F920E9491 |
:1009F000380A0F900F900F902297DE010E94223D3F |
:100A0000802D863028F082E0DE01082E0E942F3DE6 |
:100A100046E461E377E00E940B04DE010E94223D80 |
:100A2000802D863028F082E0DE01082E0E942F3DC6 |
:100A300099279F938F9389E391E09F938F931F92C0 |
:100A40000E94380A84EF91E00E94CF0CEC010F90D5 |
:100A50000F900F900F900F90CE010E94D80C88231A |
:100A6000D9F3E0913307FF27EE0FFF1FEB5FF84F3D |
:100A70008081918185369105C4F0E0913407FF278C |
:100A8000EE0FFF1FEB5FF84F808191818536910556 |
:100A900064F084E291E09F938F931F920E94380A42 |
:100AA0000E94F1380F900F900F908091390780FFCE |
:100AB00020C087E091E09F938F931F920E94380A95 |
:100AC00088EE93E00E94CF0CEC010E9495100F90ED |
:100AD0000F900F90CE010E94D80C8823D9F382E0AA |
:100AE00091E09F938F931F920E94380A0F900F906E |
:100AF0000F900E94D320809100018A3011F4289831 |
:100B000001C0289A80ED97E09093C1038093C003C1 |
:100B100088EE93E0909303068093020685E5809328 |
:100B2000FD0584EF90E09F938F931F920E94380AF7 |
:100B3000809139070F900F900F9082FF03C088EECD |
:100B400090E002C080EE90E09F938F931F920E94EE |
:100B5000380A0F900F900F908CED90E09F938F9339 |
:100B60001F920E94380A0E94D91088E893E190935E |
:100B70008603809385030F900F900F908091BF03A1 |
:100B8000882309F462C01092BF030E94F5230E94DB |
:100B90008C20209100012A3011F4289801C0289A55 |
:100BA00080910301882321F081508093030110C0BC |
:100BB0001092B2031092B30310926F0410926E045D |
:100BC00010927104109270041092730410927204C7 |
:100BD00080914E04882329F080914E0481508093A7 |
:100BE0004E048091850390918603892B01F585E061 |
:100BF00090E090938603809385030E94071680916E |
:100C00000403909105038F5F9F4FF9F48091550481 |
:100C10008823D9F080E197E29093C1038093C003C9 |
:100C200080E890E090930503809304030EC08091C8 |
:100C300085039091860301979093860380938503A3 |
:100C40002A3011F4289801C0289A0E9473080E9443 |
:100C50000309CE010E94D80C882309F48FCF20917C |
:100C6000080330910903809149079927281739070C |
:100C70009CF480910403909105038F5F9F4F61F472 |
:100C800080E797E19093C1038093C00380E093E0F5 |
:100C9000909305038093040384E690E00E94CF0CB8 |
:100CA000EC016CCF1F920F920FB60F9211248F930D |
:100CB0009F93EF93FF93809101018823E1F480914A |
:100CC000BB039091BC0301969093BC038093BB033C |
:100CD000FC01E153FB4FE081ED3019F086399105BD |
:100CE00039F41092BC031092BB0381E080930101A0 |
:100CF000E093C60004C01092BC031092BB03FF91A6 |
:100D0000EF919F918F910F900FBE0F901F901895AC |
:100D10001F920F920FB60F9211242F933F934F9370 |
:100D20008F939F93AF93BF93CF93DF93EF93FF93F3 |
:100D30008091C6008093A6034091B603463910F017 |
:100D40001092B5038091A6038D3009F05CC08091AC |
:100D5000B503823009F057C01092B503A42FBB270A |
:100D6000FD01E05FF94F3081ED01CF5ED94F288161 |
:100D70008091B9039091BA03831B9109821B910959 |
:100D80009F709093BA038093B9039C0196E03695C7 |
:100D900027959A95E1F7235C2093B803982F9F73CA |
:100DA000935C9093B7038081281729F48881981762 |
:100DB00011F491E006C08091A9038F5F8093A9038D |
:100DC00090E08091A703882309F064C0992309F477 |
:100DD00061C081E08093A7034093AA03AE5EB94F40 |
:100DE0008DE08C9380911406823509F053C088E120 |
:100DF00090E02CE00FB6F894A895809360000FBEA9 |
:100E00002093600047C08091B5038130D9F08130D4 |
:100E100018F08230E9F530C08091A603833239F4AE |
:100E20008091A703882319F481E08093B503809112 |
:100E3000A6038093120681E08093B6038091A603F7 |
:100E4000992715C082E08093B503E42FFF27809196 |
:100E5000A603EE5EF94F80834F5F4093B603209167 |
:100E6000A6038091B9039091BA03820F911D9093CC |
:100E7000BA038093B9030EC0E42FFF278091A60325 |
:100E8000EE5EF94F8083463938F31092B503E7CF11 |
:100E90001092B503FF91EF91DF91CF91BF91AF9188 |
:100EA0009F918F914F913F912F910F900FBE0F9077 |
:100EB0001F901895DC0120E030E040E050E0EFECBE |
:100EC000F4E005C08191280F311D4F5F5F4F4A1735 |
:100ED0005B07C1F73F70C90136E0969587953A9553 |
:100EE000E1F7835CFD01E153FB4F808311962F7383 |
:100EF000235CFD01E153FB4F2083A053BB4F8DE0EA |
:100F00008C93109201018091CF048093C6000895C4 |
:100F1000EF92FF920F931F93CF93DF937A01722F7B |
:100F200093E29093CF046093D0048093D10403E0C4 |
:100F300010E060E0A2EDB4E046C0F701E60FF11D5D |
:100F400090816F5F715019F4E0E040E00FC0F7014D |
:100F5000E60FF11D40816F5F715011F4E0E006C0B3 |
:100F6000F701E60FF11DE0816F5F7150892F8695C3 |
:100F70008695835C8C935527892F99278370907071 |
:100F800024E0880F991F2A95E1F79A0194E036959D |
:100F900027959A95E1F7822B835CED0189834F7049 |
:100FA0005070440F551F440F551F8E2F8295869504 |
:100FB00086958370842B835C8A83EF73E35CEB8379 |
:100FC0000C5F1F4F1496772309F0B7CFC8010E941A |
:100FD0005A07E6E0CDB7DEB70C940D3D1F93CF93D3 |
:100FE000DF93EC0170E0A22FBB27129748C0E42FDB |
:100FF000FF27EE5EF94F30814F5FE42FFF27EE5E53 |
:10100000F94F50814F5FE42FFF27EE5EF94F1081BB |
:101010004F5FE42FFF27EE5EF94F20814F5F842F53 |
:101020009927A817B90774F15D53FE01E70FF11D69 |
:101030003D53330F330F852F82958F70382B3083BC |
:10104000613001F1912F9D537F5FFE01E70FF11D8C |
:1010500071505295507F892F86958695582B5083D5 |
:1010600063506F3F79F07E5FFE01E70FF11D9295AF |
:10107000990F990F907C2D53922B90837F5F66235D |
:1010800009F0B5CFDF91CF911F9108951F93182FCD |
:101090008A3019F48DE00E9446088091C00085FFD7 |
:1010A000FCCF1093C60080E090E01F910895089552 |
:1010B000E1ECF0E088E18083A0ECB0E08C9182600C |
:1010C0008C938081806880838081806480838AE2C1 |
:1010D0008093C40088EC90E00E94CF0C9093FC05B4 |
:1010E0008093FB05089580910101882309F48AC04B |
:1010F0008091A203882371F080910101882351F02F |
:101100002BE04DEF55E06091CE0487E40E94880704 |
:101110001092A2038091FB059091FC050E94D80CCF |
:10112000882321F48091A4038823B1F080910101E8 |
:10113000882391F022E448EA56E06091CE0484E4EA |
:101140000E9488071092A40384EF91E00E94CF0CC4 |
:101150009093FC058093FB05609102016F3F89F03D |
:10116000462F552734E0440F551F3A95E1F74C5F61 |
:101170005E4F605D20E181E40E9488078FEF8093DD |
:1011800002018091A303882359F1809101018823F2 |
:1011900039F10E94E2101092A3033091AC03932F17 |
:1011A0009F5F9093AC03943021F08091AD0388232E |
:1011B00059F026E145E057E060E084E30E948807AB |
:1011C0008FEF8093AC030CC044E1949FA0011124E5 |
:1011D000465E5C4F24E160E0832F8F5C0E948807AD |
:1011E0008091A503882371F080910101882351F03B |
:1011F0002AE048E056E06091CE0486E50E94880728 |
:101200001092A5030895A2E0B0E0E9E0F9E00C94A3 |
:10121000F43C8091A703882309F4CDC08FEF80931D |
:101220000301809114069927AA27BB27FC01E156E8 |
:10123000F040E631F10508F0BCC0E85CFF4F0C94CB |
:101240001C3D2091AA0343E062E0CE0101960E947A |
:10125000EE07898180930201ACC02091AA0343E08C |
:101260006BE08DEF95E00E94EE078091E603909190 |
:10127000FF05892B8093E60381E08093A40399C046 |
:101280002091AA0343E062E0CE0101960E94EE079E |
:101290008091E6039981892B8093E6038A818F3FB1 |
:1012A00021F481E08093AD0302C01092AD0381E090 |
:1012B0008093A3037EC02091AA0343E064E08EEAFA |
:1012C00093E006C02091AA0343E063E082EB93E041 |
:1012D0000E94EE076EC081E08093A5036AC081E0A2 |
:1012E0008093A20366C02091AA0343E062E0CE018E |
:1012F00001960E94EE0789818F3F89F0863010F0B9 |
:1013000085E0898346E461E377E089810E940B04EC |
:10131000898126E441E357E06091CE0408C0109132 |
:10132000CE040E94E20326E441E357E0612F855B8F |
:101330000E9488073EC02091AA0343E066E481E34F |
:1013400097E00E94EE078091140646E461E377E09F |
:101350008B560E94F103809114068B56A2E0B0E0F8 |
:10136000082E0E942F3D60915C07772788279927D8 |
:1013700024EC39E040E050E00E94563C6093870343 |
:10138000709388038093890390938A0360915D072B |
:101390007727882799270E94563C60938B03709388 |
:1013A0008C0380938D0390938E030E94E2030E942E |
:1013B0002C221092A703E3E0CE5F0C94103D982FEF |
:1013C0008091EA06813069F48091E503E82FFF27D8 |
:1013D000E65EFC4F90838F5F8093E50321E030E071 |
:1013E00005C0892F0E944608282F3327C901089578 |
:1013F0001F93182F04C080E30E94DF0911501116BB |
:10140000D4F31F9108951F93182F04C080E20E9407 |
:10141000DF0911501116D4F31F9108950F931F93F4 |
:10142000CF93DF938C01EB0108C0F8010F5F1F4FD2 |
:10143000E4918E2F0E94DF0921972097B1F7DF9169 |
:10144000CF911F910F9108950F931F93CF93DF9327 |
:101450008C01EB0106C0F80181918F010E94DF0928 |
:1014600021972097C1F7DF91CF911F910F91089598 |
:10147000A3E3B0E0EEE3FAE00C94E53C29968FADEF |
:1014800029978093EA06CE01855B9F4F9D838C83CD |
:101490002B968EAD9FAD2B979FA78EA7222433242A |
:1014A000210102C0130124010EA51FA502C00F5F78 |
:1014B0001F4FF801F490FF2019F0F5E2FF16B9F77D |
:1014C000B8018EA59FA5681B790B11F00E940E0A2A |
:1014D000FF2009F442C20F5F1F4F1FA70EA71982FA |
:1014E000AC81BD811BAA1AAA9FEF99ABEEA5FFA5FF |
:1014F000CF0101969FA78EA7B49095E7B91621F06A |
:101500008B2D8062883789F4EBA9E0FF07C02D900E |
:101510003D904D905C901397149607C08D919C91CF |
:1015200011971C01442455241296F0E2BF1621F4B1 |
:1015300089818823D9F685C083E2B81609F483C06F |
:101540009AE2B91621F0EDE2BE1669F408C0FD0179 |
:101550001296E081EAABE7FFC9CFE195EAABFBA9C0 |
:10156000F061FF7D72C08BE2B81609F46AC09EE29A |
:10157000B916B1F52EA53FA52F5F3F4FEEA5FFA5EC |
:1015800084918A3221F0B82E20E030E01BC0FD01AA |
:1015900012964081518157FF02C04FEF5FEF49AB78 |
:1015A0003FA72EA7A3CFC90103E0880F991F0A9573 |
:1015B000E1F7220F331F280F391F2B0D311D205348 |
:1015C0003040B49031968B2D80538A3060F3FFA762 |
:1015D000EEA7A90137FF02C04FEF5FEF49AB8DCFF8 |
:1015E000F0E3BF1631F48BA984FD80CF80628BAB12 |
:1015F0007DCF8B2D81538930E8F420E030E0C901A4 |
:10160000F3E0880F991FFA95E1F7220F331F280F97 |
:10161000391F2B0D311D20533040EEA5FFA5CF0102 |
:1016200001969FA78EA7B4908B2D80538A3038F3F4 |
:101630002AAB63CF98E6B91651F4EBA9E460EBABA3 |
:1016400055CFB98253CFFBA9F860FBAB4FCF8CE6E7 |
:10165000B81621F49BA991609BAB48CFBD83AC83A6 |
:10166000E3E6BE1639F41296BD83AC8312978C91D3 |
:101670008E8318C1F4E4BF1639F084E6B81639F049 |
:1016800099E6B91659F503C0EBA9E160EBABFBA9EC |
:10169000F0FF08C01496BD83AC835E904E903E90E0 |
:1016A0002E900AC01296BD83AC839E918E911C0130 |
:1016B000442437FC4094542C57FC03C08AE088AB88 |
:1016C00092C05094409430942094211C311C411CB1 |
:1016D000511C8DE289839AE098AB85C0EFE4BE1679 |
:1016E00029F0FFE6BF1639F488E061C09BA991603C |
:1016F0009BABE8E056C0F0E7BF1671F41296BD83CD |
:10170000AC839E918E911C01442455248BA9806446 |
:101710008BAB78E7B72E5EC0E3E7BE16D9F512961D |
:10172000BD83AC83DE90CE90C114D10489F488E2ED |
:101730008E838EE68F8385E788878CE689878A8704 |
:1017400089E28B871C8666E0C62ED12CCC0EDD1E6E |
:10175000F9A9F7FD13C04F2F552747FD509560E0BD |
:1017600070E0C6010E94E13A009711F419A90DC07A |
:101770008C1919A981174CF4182F07C0F601019094 |
:101780000020E9F731971E2F1C19198242013101FF |
:1017900040E094C085E5B81631F095E7B91649F4F4 |
:1017A000EAE0E8AB1FC0FBA9F160FBAB8AE088ABC5 |
:1017B00019C098E5B91621F0E8E7BE1609F06EC029 |
:1017C000FBA9F3FD02C080E1F2CF211431044104F2 |
:1017D000510419F490E198AB05C0EBA9E064EBABC0 |
:1017E000F0E1F8AB198289A987FD03C09BA99F7D11 |
:1017F0009BAB211431044104510461F4E9A9EE23A7 |
:1018000049F46624772443015EE2C52ED12CCC0E28 |
:10181000DD1E3EC04EE2C42ED12CCC0EDD1EF8A93A |
:10182000EF2EFF2400271127C201B101A801970163 |
:101830000E94A83C6A3020F430E3A32EA60E08C014 |
:1018400027E5A22EA60E88E5B81611F49FEDA92271 |
:10185000F601A2926F01C201B101A80197010E9495 |
:10186000A83C39014A012E143F044006510618F0E5 |
:1018700019012A01D9CFF8A9F83051F48BA983FFB7 |
:1018800007C090E3A91621F080E3F60182936F016F |
:10189000CE018C19182F125D49A910C0BB2009F484 |
:1018A0005CC0BE8219824201310100E096E0C92E7F |
:1018B000D12CCC0EDD1E11E021E005C0212F042F1C |
:1018C000011B07FD00E08981882319F0812F8F5FBC |
:1018D00007C09BA996FD02C0812F02C0822F8E5F98 |
:1018E000A82EA00EEBA9EE2EFF2480E3482E512C4B |
:1018F0004E205F204114510421F48AA98A190E94C4 |
:10190000030A8981882329F061E070E0CE01019605 |
:1019100009C0E6FE09C080E38A83BB8262E070E012 |
:10192000CE0102960E94240AF0E24F16510421F4DF |
:101930008AA98A190E94F809802F0E94F809612F4C |
:10194000772767FD7095C6010E94240AE4FEAACDA0 |
:101950008AA98A190E94030AA5CDE2E1CD5C0C9404 |
:10196000013D82E085BD83EA84BD17BC88E788BD60 |
:1019700096E096BD83EC8093B0009093B100E0E7D1 |
:10198000F0E0808182608083EEE6F0E0808181601B |
:1019900080838AE08093B3001092B2000895209172 |
:1019A000BD033091BE032F5F3F4F820F931F0895F9 |
:1019B0002091BD033091BE03821B930B892F992781 |
:1019C00086958074992708951F920F920FB60F92F3 |
:1019D0001124EF92FF920F931F932F933F934F93F6 |
:1019E0005F936F937F938F939F93AF93BF93CF93A7 |
:1019F000DF93EF93FF93809106038150809306035A |
:101A00008F3F09F069C083E88093B00080919C0308 |
:101A1000C82FDD27D093C303C093C203809166070C |
:101A2000E090530720910104309102044091030497 |
:101A30005091040480FF18C0FF2400271127CA0119 |
:101A4000B90120E830E040E050E00E94CA3CC80103 |
:101A5000B7010E94563C20E032E040E050E00E9496 |
:101A6000CA3CC20FD31F17C0FF2400271127CA0189 |
:101A7000B90120E830E040E050E00E94CA3CC801D3 |
:101A8000B7010E94563C20E032E040E050E00E9466 |
:101A9000CA3CC21BD30BD093C303C093C203209193 |
:101AA000C2033091C303809154079927281739073F |
:101AB00034F08091550799278217930724F4909367 |
:101AC000C3038093C2038091C2038093B3008091CB |
:101AD00056078093060304C083E08093B0005F98AC |
:101AE000FF91EF91DF91CF91BF91AF919F918F9136 |
:101AF0007F916F915F914F913F912F911F910F9126 |
:101B0000FF90EF900F900FBE0F901F9018951F92AF |
:101B10000F920FB60F9211242F933F934F935F9321 |
:101B20006F937F938F939F93AF93BF93EF93FF93A5 |
:101B30008091C40381508093C4038F3FB9F48AE03D |
:101B40008093C403809107038F5F817080930703A4 |
:101B5000882319F481E08093BF038091BD039091A5 |
:101B6000BE0301969093BE038093BD038091C00392 |
:101B70009091C1030297B0F08091C0039091C1038E |
:101B800001979093C1038093C0038091C00390910B |
:101B9000C103209104033091050382239323892BF1 |
:101BA000D1F406C08FEF9FEF909305038093040359 |
:101BB000809100018A3039F404C05A9A05C0479ACE |
:101BC00003C05A9801C047988091390783FF08C025 |
:101BD0000E94BF3805C0809100018A3081F7EDCFA7 |
:101BE000FF91EF91BF91AF919F918F917F916F91F5 |
:101BF0005F914F913F912F910F900FBE0F901F90CB |
:101C000018952091BD033091BE032F5F3F4F280FE1 |
:101C1000391F4FEE02C040937A008091BD0390912E |
:101C2000BE03B901681B790B77FFF5CF08952091AA |
:101C3000BD033091BE032F5F3F4F280F391F8091A6 |
:101C4000BD039091BE03A901481B590B57FFF7CF65 |
:101C5000089510927C008FEE80937A0008951F9271 |
:101C60000F920FB60F921124DF92EF92FF920F9313 |
:101C70001F932F933F934F935F936F937F938F9314 |
:101C80009F93AF93BF93CF93DF93EF93FF93109204 |
:101C90007A008091E103D82ED394D092E103E82F0B |
:101CA000FF27EB30F10508F022C2E25BFF4F0C94F6 |
:101CB0001C3D80917800909179009093E00380938F |
:101CC000DF0381E08093E2038091D9039091DA03EE |
:101CD00001969093DA038093D903FFC18091780035 |
:101CE000909179009093DE038093DD0390C0809102 |
:101CF0007800909179009093DC038093DB0384E07B |
:101D000070C140910803509109038091780090912F |
:101D100079009A01220F331F240F351F63E070E012 |
:101D20000E94813C260F371F3695279536952795BB |
:101D3000309309032093080386E053C18091FB038D |
:101D40009091FC032091780030917900821B930BD5 |
:101D50009093EC068093EB068091EB069091EC0655 |
:101D60009093CC038093CB0387E03BC180917800B4 |
:101D7000909179002091F9033091FA03821B930B23 |
:101D80009093F7068093F6068091F6069091F706F9 |
:101D90009093CE038093CD031092E2039EC1809175 |
:101DA00000012091DF033091E0038A3049F48091F3 |
:101DB000780090917900820F931F9695879506C0C1 |
:101DC0008091780090917900820F931F9093CA03BD |
:101DD0008093C90381E005C1809100012091DD035A |
:101DE0003091DE038A3049F4809178009091790037 |
:101DF000820F931F9695879506C0809178009091E9 |
:101E00007900820F931F9093C8038093C70382E0E9 |
:101E1000E8C0809100012091DB033091DC038A301F |
:101E200049F48091780090917900820F931F9695E4 |
:101E3000879506C08091780090917900820F931F5A |
:101E40009093C6038093C50385E0CBC06091780072 |
:101E500070917900E090FD03F090FE030091FF0384 |
:101E600010910004882777FD8095982F0E94943B5D |
:101E7000A80197010E94EE3A0E94773B7093D0032D |
:101E80006093CF032091CF033091D003E091EB0614 |
:101E9000F091EC068091F6069091F70697FF03C04B |
:101EA000909581959F4F64E070E00E94953CEB0116 |
:101EB000CF01F7FF03C0909581959F4F64E070E0DC |
:101EC0000E94953C260F371F2C0F3D1F3093D003E7 |
:101ED0002093CF038091CF039091D003029704F118 |
:101EE0006091FD037091FE038091FF0390910004C7 |
:101EF00020E030E048E454E40E949E3B88230CF04C |
:101F00003CC06091FD037091FE038091FF039091AE |
:101F100000042AE037ED43EA5CE30E94EF3A25C073 |
:101F20008091CF039091D0038F5F9F4F34F56091E4 |
:101F3000FD037091FE038091FF039091000420E067 |
:101F400030E046E154E40E94A13B1816B4F46091DD |
:101F5000FD037091FE038091FF03909100042AE03D |
:101F600037ED43EA5CE30E94EE3A6093FD03709321 |
:101F7000FE038093FF039093000481E08093D603D7 |
:101F800080917800909179009093EE068093ED0611 |
:101F9000E090CF03F090D0030027F7FC0095102FBE |
:101FA0008091390490913A04A0913B04B0913C0493 |
:101FB000E80EF91E0A1F1B1FC801B70120E034E01C |
:101FC00040E050E00E94CA3CE21AF30A040B150BF1 |
:101FD000E0923904F0923A0400933B0410933C04DD |
:101FE00083E08093E20379C08091FB069091FC0628 |
:101FF0002091780030917900820F931F9093FC0616 |
:102000008093FB068091F3068F5F8093F3068091A7 |
:10201000F306853008F46BC08091780090917900C8 |
:1020200090930F0380930E031092F3068091EF06B6 |
:102030009091F0062091FB063091FC06821B930BD9 |
:102040002091560430915704821B930B9093D80330 |
:102050008093D7036091FB067091FC06E0900A0321 |
:10206000F0900B0300910C0310910D03882777FD6E |
:102070008095982FA8019701220F331F441F551FE9 |
:102080002E0D3F1D401F511F620F731F841F951F90 |
:1020900024E030E040E050E00E94CA3C20930A0374 |
:1020A00030930B0340930C0350930D032091EF06E4 |
:1020B0003091F00680910A0390910B03A0910C03DC |
:1020C000B0910D03281B390B30935704209356040D |
:1020D0001092FC061092FB060AC08091E2038093E6 |
:1020E0007C00DD2051F08FEE80937A0006C01092C4 |
:1020F000E2031092E10310927C00FF91EF91DF91D7 |
:10210000CF91BF91AF919F918F917F916F915F918F |
:102110004F913F912F911F910F91FF90EF90DF9082 |
:102120000F900FBE0F901F901895CF93DF93A3E0F1 |
:10213000B0E00E94223D802DC82FDD27C531D1059A |
:1021400008F02A97C7BD84E690E00E94010E8091B6 |
:102150000E0390910F0382559340D0F4C0E0D0E07D |
:1021600017C0C7BD82E390E00E94010E81EF91E0AD |
:102170009F938F931F920E94380A80910E03909133 |
:102180000F030F900F900F908458934020F02196EA |
:10219000CA3FD10530F3A3E0B0E00C2E0E942F3DE2 |
:1021A000C093F8068CE291E00E94010EDF91CF917E |
:1021B0000895EAE1F3E080E2819393E0EA36F907DB |
:1021C000D9F708951F938091E603282F3327C9017B |
:1021D00081709070682F8823A9F08091E70388238D |
:1021E00011F0815002C080916A038093E703EAE115 |
:1021F000F3E080E2819393E0EA36F907D9F78FEFB5 |
:102200008093AC03A9014270507021FF10C08091EF |
:10221000E7038F5F8093E703EAE1F3E080E28193D5 |
:1022200093E0EA36F907D9F78FEF8093AC03662382 |
:1022300021F0452B11F01092E70381E18093E50333 |
:102240008091E70399279F938F9386E095E09F9372 |
:102250008F9381E08F930E94380A8091E7030F905B |
:102260000F900F900F900F90E82FFF27ED30F105A2 |
:1022700008F023C4E75AFF4F0C941C3D1092E5036D |
:1022800084EF94E09F938F9311E01F930E94380A8C |
:1022900084E18093E5032091000187E690E09F931D |
:1022A0008F9383E490E09F938F931F921F92822FCE |
:1022B0006AE00E94753C892F99279F938F93822F04 |
:1022C0000E94753C99279F938F938FED94E09F9385 |
:1022D0008F931F930E94380A88E28093E5030E943F |
:1022E000E20399279F938F9382ED94E09F938F93BE |
:1022F0001F930E94380A8CE38093E50382EC94E0FC |
:102300009F938F931F930E94380A88C28091390748 |
:1023100080FF44C01092E5038091560490915704C9 |
:102320009F938F9383EB94E09F938F9311E01F9380 |
:102330000E94380A84E18093E503809158049091CB |
:1023400059049F938F9384EA94E09F938F931F93F4 |
:102350000E94380A88E28093E50380910E039091F1 |
:102360000F039F938F9385E994E09F938F931F931F |
:102370000E94380A8CE38093E5038091F806992740 |
:102380009F938F9386E894E09F938F931F930E946F |
:10239000380A8DB79EB744968DBF94C384E180936D |
:1023A000E5038FE794E09F938F9311E01F930E94C2 |
:1023B000380A88E28093E50381E794E09F938F9346 |
:1023C0001F930E94380A8DB79EB70696E5CF1092EC |
:1023D000E50387E694E09F938F9311E01F930E949B |
:1023E000380A84E18093E50360910104709102044E |
:1023F000809103049091040420E034E040E050E038 |
:102400000E94CA3C5F934F933F932F9388E594E0DB |
:102410009F938F931F930E94380A88E28093E5036D |
:102420006091090470910A0480910B0490910C044E |
:1024300020E034E040E050E00E94CA3C5F934F93BC |
:102440003F932F9389E494E09F938F931F930E946F |
:10245000380A8CE38093E50380913D0490913E041B |
:102460009F938F938AE394E09F938F931F930E948F |
:10247000380A8DB79EB746968FCF1092E5038091AC |
:10248000090790910A0720910707309108079F9349 |
:102490008F933F932F938AE294E09F938F9311E061 |
:1024A0001F930E94380A84E18093E50380910D0711 |
:1024B00090910E0720910B0730910C079F938F93FB |
:1024C0003F932F938AE194E09F938F931F930E94F1 |
:1024D000380A88E28093E5038091110790911207F2 |
:1024E00020910F07309110079F938F933F932F9365 |
:1024F0008AE094E09F938F931F930E94380A8CE3A5 |
:102500008093E5038091150790911607209113079A |
:10251000309114079F938F933F932F938AEF93E00B |
:102520007BC01092E503E0913207FF27EE0FFF1FFB |
:10253000EB5FF84F20813181E0913107FF27EE0FEB |
:10254000FF1FEB5FF84F808191813F932F939F9303 |
:102550008F938AEE93E09F938F9311E01F930E94D5 |
:10256000380A84E18093E503E0913407FF27EE0FFA |
:10257000FF1FEB5FF84F20813181E0913307FF2788 |
:10258000EE0FFF1FEB5FF84F808191813F932F93F8 |
:102590009F938F938AED93E09F938F931F930E9455 |
:1025A000380A88E28093E503E0913607FF27EE0FB3 |
:1025B000FF1FEB5FF84F20813181E0913507FF2746 |
:1025C000EE0FFF1FEB5FF84F808191813F932F93B8 |
:1025D0009F938F938AEC93E09F938F931F930E9416 |
:1025E000380A8CE38093E503E0913807FF27EE0F6C |
:1025F000FF1FEB5FF84F20813181E0913707FF2704 |
:10260000EE0FFF1FEB5FF84F808191813F932F9377 |
:102610009F938F938AEB93E09F938F931F930E94D6 |
:10262000380A8DB79EB74C96B7CE1092E5038CEA68 |
:1026300093E09F938F9311E01F930E94380A0F90AD |
:102640000F900F9080910001E091EF03F091F00363 |
:102650008A30F1F584E18093E5038091C503909180 |
:10266000C603FF93EF938E1B9F0B9F938F938DE970 |
:1026700093E09F938F931F930E94380A88E2809380 |
:10268000E5032091F1033091F2038091C70390910B |
:10269000C8033F932F93821B930B9F938F938EE8D6 |
:1026A00093E09F938F931F930E94380A8CE380934B |
:1026B000E5038091F3039091F4039F938F938091AE |
:1026C000A0079091A1079F938F938FE793E04BC052 |
:1026D00084E18093E5032091C5033091C603CF01C7 |
:1026E00062E070E00E94953C7F936F932E1B3F0B3E |
:1026F0003F932F9380E793E09F938F931F930E94C4 |
:10270000380A88E28093E503E091F103F091F20347 |
:102710002091C7033091C803CF0162E070E00E94AE |
:10272000953C7F936F932E1B3F0B3F932F9381E636 |
:1027300093E09F938F931F930E94380A8CE38093BA |
:10274000E5038091F3039091F40362E070E00E944E |
:10275000953C7F936F938091A0079091A1079F93E1 |
:102760008F9382E593E09F938F931F930E94380A83 |
:102770008DB79EB7459610CE1092E50385E493E0A1 |
:102780009F938F9311E01F930E94380A84E18093F6 |
:10279000E5038091F9039091FA032091CD033091E4 |
:1027A000CE039F938F933F932F9386E393E09F9362 |
:1027B0008F931F930E94380A88E28093E5038091EB |
:1027C000FB039091FC032091CB033091CC039F93AA |
:1027D0008F933F932F9387E293E09F938F931F9361 |
:1027E0000E94380A8CE38093E5036091FD037091A9 |
:1027F000FE038091FF03909100040E94773B7F933A |
:102800006F9380918807909189079F938F9388E1B8 |
:1028100093E09F938F931F930E94380A8DB79EB7C2 |
:102820004896BACD84E18093E503809108039091A6 |
:1028300009039F938F9389E093E09F938F9311E017 |
:102840001F930E94380A88E28093E50380914E042A |
:1028500099279F938F938AEF92E09F938F931F9373 |
:102860000E94380A8DB79EB70A9696CD1092E5035E |
:102870008BEE92E09F938F9311E01F930E94380A92 |
:1028800084E18093E50380914104909142049F93F9 |
:102890008F938CED92E09F938F931F930E94380A41 |
:1028A00088E28093E50380913D0490913E049F93DC |
:1028B0008F938DEC92E09F938F931F930E94380A21 |
:1028C0008CE38093E50380913F04909140049F93B3 |
:1028D0008F938EEB92E0E8C01092E503809146045E |
:1028E000909147049F938F9382EB92E09F938F93F5 |
:1028F00011E01F930E94380A84E18093E5038091E0 |
:102900004804909149049F938F9386EA92E09F93A5 |
:102910008F931F930E94380A88E28093E503809189 |
:102920004A0490914B049F938F938AE992E09F937E |
:102930008F931F930E94380A8CE38093E503809164 |
:102940004C0490914D049F938F938EE892E01CCDA0 |
:102950001092E50386E892E09F938F9311E01F9316 |
:102960000E94380A84E18093E50380919C039927B3 |
:102970009F938F9388E792E09F938F931F930E947A |
:10298000380A88E28093E5038091C2039091C303E3 |
:102990009F938F938AE692E09F938F931F930E9459 |
:1029A000380A8CE38093E5038091550799279F931C |
:1029B0008F938091540799279F938F938CE592E092 |
:1029C0009F938F931F930E94380AE3CC1092E503E4 |
:1029D00084E592E09F938F9311E01F930E94380A41 |
:1029E00084E18093E5038091AE07992787FD909558 |
:1029F0009F938F9385E492E09F938F931F930E9400 |
:102A0000380A88E28093E5038091AF07992787FD14 |
:102A100090959F938F9386E392E09F938F931F935C |
:102A20000E94380A8CE38093E5038091B0079927D0 |
:102A300087FD90959F938F9387E292E035C0109227 |
:102A4000E5038DE192E09F938F9311E01F930E9425 |
:102A5000380A84E18093E5038091B1079091B20731 |
:102A60009F938F938FE092E09F938F931F930E9489 |
:102A7000380A88E28093E5038091B3079091B40708 |
:102A80009F938F9381E092E09F938F931F930E9477 |
:102A9000380A8CE38093E5038091B5079091B607DF |
:102AA0009F938F9383EF91E09F938F931F930E9447 |
:102AB000380A8DB79EB742966FCC815080936A03D7 |
:102AC0001092E7031092E6031F9108951092B90047 |
:102AD0008AE28093B800089585EA8093BC0080E084 |
:102AE00090E0089584E98093BC0008951092B900A5 |
:102AF0008093BB0085E88093BC0080E090E008955F |
:102B00001F920F920FB60F9211248F939F93EF9302 |
:102B1000FF938091E8038F5F8093E8038150E82F53 |
:102B2000FF27E830F10508F064C0EA59FF4F0C9424 |
:102B30001C3D8091E903880F8E5A09C08091E903FA |
:102B40008F5F8093E903815027C080917B071092AB |
:102B5000B9008093BB0085E88093BC004AC084E93B |
:102B60008093BC008091E903843018F41092E8034C |
:102B700002C01092E90385EAEFCF8091EA03880F43 |
:102B80008D5AE5CF8091BB00E091EA03FF27E35027 |
:102B9000F94F80838091EA03813039F08130A8F2C7 |
:102BA000823031F0833029F506C080918007CFCF85 |
:102BB00080919807CCCF80919A07C9CF8091EA0382 |
:102BC0009091BB00E82FFF27E350F94F94838F5F6C |
:102BD0008093EA03843010F01092EA0384E9809332 |
:102BE000BC008AE090E09093860380938503109266 |
:102BF000E8038091BC0080688093BC00FF91EF9156 |
:102C00009F918F910F900FBE0F901F9018954CEBD6 |
:102C100050E084E9DA018C931092E8032BEB30E06A |
:102C2000F90180811092E90380E88C931092BD0035 |
:102C30001092BA001082E9EBF0E01082A8EBB0E04D |
:102C40001C9210828AE28C9385EADA018C931082BE |
:102C5000F901108285E88C93089583EC80938100BC |
:102C6000EFE6F0E08081806280831092F40310929E |
:102C7000F3031092F2031092F1031092F0031092FA |
:102C8000EF0308951F920F920FB60F9211240F9326 |
:102C90001F932F933F934F935F936F937F938F93E4 |
:102CA0009F93AF93BF93CF93DF93EF93FF932091C5 |
:102CB0008600309187008091ED039091EE03281BF0 |
:102CC000390B80918600909187009093EE0380935A |
:102CD000ED03C9018D549440C091EB03D091EC03F6 |
:102CE000835F9A4158F4249714F010926B0381E0AB |
:102CF00090E09093EC038093EB035CC0CA30D10565 |
:102D00000CF058C0C9018B5F9040845B914008F083 |
:102D100040C0A901425D5140FE01EE0FFF1FEB5F75 |
:102D2000F84F80819181FA01E81BF90BCF01F7FF81 |
:102D300003C0909581959F4F06974CF480914E0467 |
:102D4000883C28F480914E04865F80934E04FE01F7 |
:102D5000EE0FFF1F8F010B5F184FD8012D913C9193 |
:102D6000C901880F991F820F931F840F951F64E07C |
:102D700070E00E94953CD8018D919C9111979B0128 |
:102D8000281B390BE55EF84F3183208311967C9325 |
:102D90006E93FE013196F093EC03E093EB03E53084 |
:102DA000F10511F45D9A05C05D98369711F45C9AAF |
:102DB00001C05C98FF91EF91DF91CF91BF91AF91EE |
:102DC0009F918F917F916F915F914F913F912F9143 |
:102DD0001F910F910F900FBE0F901F901895A2E1B9 |
:102DE000B0E0E5EFF6E10C94E53C8091C9039091E9 |
:102DF000CA034090F3035090F403481A590A5092C2 |
:102E0000A1074092A0078091C7039091C803988BB7 |
:102E10008F87A091F103B091F203BA8BA98BE09157 |
:102E2000C503F091C603FE87ED878091EF03909173 |
:102E3000F0039C878B876091CD037091CE03E09067 |
:102E40009D07F0909E070027F7FC0095102F88271C |
:102E500077FD8095982F2CE030E040E050E00E9414 |
:102E6000563CE60EF71E081F191FC801B70122E0E5 |
:102E700030E040E050E00E94CA3C30939E0720932F |
:102E80009D076091CB037091CC03E090A707F09071 |
:102E9000A8070027F7FC0095102F882777FD80955D |
:102EA000982F2CE030E040E050E00E94563CE60EC7 |
:102EB000F71E081F191FC801B70122E030E040E0EB |
:102EC00050E00E94CA3C3093A8072093A7072091A6 |
:102ED000CF033091D00360918807709189078827CC |
:102EE00077FD8095982F442737FD4095542F620F2A |
:102EF000731F841F951F22E030E040E050E00E94E5 |
:102F0000CA3C30938907209388072091CD033091E4 |
:102F1000CE03C901880F991F820F931F880F991F35 |
:102F2000880F991FAA2797FDA095BA2F2091110409 |
:102F3000309112044091130450911404280F391F4A |
:102F40004A1F5B1F20931104309312044093130413 |
:102F5000509314042091CB033091CC03C901880F06 |
:102F6000991F820F931F880F991F880F991FAA27F7 |
:102F700097FDA095BA2F2091150430911604409129 |
:102F8000170450911804280F391F4A1F5B1F209304 |
:102F90001504309316044093170450931804E090DE |
:102FA000ED06F090EE06A090FD03B090FE03C090F9 |
:102FB000FF03D09000046091190470911A0480916D |
:102FC0001B0490911C040E94943B3B014C01002780 |
:102FD000F7FC0095102FC801B7010E94943BA60191 |
:102FE00095010E94EE3A9B01AC01C401B3010E941D |
:102FF000EF3A0E94773B6093190470931A04809310 |
:103000001B0490931C045201CC24B7FCC094DC2C0C |
:1030100060903104709032048090330490903404B6 |
:103020006A0C7B1C8C1C9D1C6092310470923204D3 |
:103030008092330490923404809135049091360448 |
:10304000A0913704B09138048A0D9B1DAC1DBD1DA5 |
:103050008093350490933604A0933704B0933804DA |
:1030600090915E049A87992309F05FC080915F0474 |
:10307000882309F05AC08091390786FF56C0E09036 |
:103080006C04FF2400271127609121047091220411 |
:10309000809123049091240420E030E140E050E04E |
:1030A0000E94CA3CCA01B901A80197010E94563C7E |
:1030B0009B01AC01C601B5010E94563C20E038E0FE |
:1030C00040E050E00E94CA3C2093B5043093B6041F |
:1030D0004093B7045093B8046091290470912A0476 |
:1030E00080912B0490912C0420E030E140E050E0EE |
:1030F0000E94CA3CCA01B901A80197010E94563C2E |
:103100009B01AC01C601B5010E94563C20E038E0AD |
:1031100040E050E00E94CA3C2093B1043093B204D6 |
:103120004093B3045093B40410C01092B1041092B1 |
:10313000B2041092B3041092B4041092B504109229 |
:10314000B6041092B7041092B8048091B50490911F |
:10315000B604A091B704B091B8048E839F83A8876A |
:10316000B9878091B1049091B204A091B304B09159 |
:10317000B4048A839B83AC83BD8380916D04282E25 |
:10318000332444245524EF84F888A989BA89EA1A9B |
:10319000FB0AEE81FF81EE0EFF1E6A817B818C812E |
:1031A0009D81A20191010E94563C20E032E040E066 |
:1031B00050E00E94CA3CE20EF31EF0927A07E092C1 |
:1031C00079079701442737FD4095542F80912D04AE |
:1031D00090912E04A0912F04B0913004820F931F80 |
:1031E000A41FB51F80932D0490932E04A0932F0449 |
:1031F000B093300480915A0490915B04E81AF90A64 |
:103200000027F7FC0095102F8091290490912A0443 |
:10321000A0912B04B0912C04E80EF91E0A1F1B1F6D |
:10322000E0922904F0922A0400932B0410932C04BA |
:10323000A0908B03B0908C03C0908D03D0908E0330 |
:10324000AE14BF04C006D106C4F480E197E2A0E04A |
:10325000B0E08A199B09AC09BD09809329049093B9 |
:103260002A04A0932B04B0932C0480932D049093F4 |
:103270002E04A0932F04B093300422273327A901F2 |
:103280002A193B094C095D098091290490912A046F |
:10329000A0912B04B0912C0482179307A407B507C3 |
:1032A000B4F4D601C50180519742A040B04080934C |
:1032B000290490932A04A0932B04B0932C048093A8 |
:1032C0002D0490932E04A0932F04B093300480918A |
:1032D000C7039091C8030F9734F488E19CEF909353 |
:1032E0007A07809379078091C7039091C803079765 |
:1032F00034F480E398EF90937A0780937907F09104 |
:103300000001F983FA30A9F48091C7039091C803B2 |
:10331000835F934034F088EE93E090937A07809334 |
:1033200079078091C7039091C8038A5F9340DCF0CE |
:1033300014C08091C7039091C803855E974034F014 |
:1033400088EE93E090937A07809379078091C70382 |
:103350009091C803835F974034F080ED97E090939D |
:103360007A0780937907ED84FE848B859C85E81A23 |
:10337000F90AAA81BB81EA1AFB0A6E817F818885DE |
:103380009985A20191010E94563C20E032E040E084 |
:1033900050E00E94CA3CE21AF30AF0928207E092DF |
:1033A00081079701442737FD4095542F80912504CC |
:1033B00090912604A0912704B0912804820F931FB6 |
:1033C000A41FB51F8093250490932604A09327047F |
:1033D000B093280480915C0490915D04E81AF90A86 |
:1033E0000027F7FC0095102F809121049091220472 |
:1033F000A0912304B0912404E80EF91E0A1F1B1F9C |
:10340000E0922104F09222040093230410932404F8 |
:10341000A0908703B0908803C0908903D0908A035E |
:10342000AE14BF04C006D106C4F480E197E2A0E068 |
:10343000B0E08A199B09AC09BD09809321049093DF |
:103440002204A0932304B093240480932504909332 |
:103450002604A0932704B093280422273327A90128 |
:103460002A193B094C095D0980912104909122049D |
:10347000A0912304B091240482179307A407B507F1 |
:10348000B4F4D601C50180519742A040B04080936A |
:10349000210490932204A0932304B09324048093E6 |
:1034A000250490932604A0932704B09328048091C8 |
:1034B000C5039091C6030F9734F488E19CEF909375 |
:1034C0008207809381078091C5039091C603079777 |
:1034D00034F480E398EF9093820780938107B98159 |
:1034E000BA30A9F48091C5039091C603835F9340DD |
:1034F00034F088EE93E09093820780938107809167 |
:10350000C5039091C6038A5F9340DCF014C080919C |
:10351000C5039091C603855E974034F088EE93E032 |
:1035200090938207809381078091C5039091C60391 |
:10353000835F974034F080ED97E09093820780930B |
:1035400081078FEE80937A0060921D0470921E04B2 |
:1035500080921F0490922004809121049091220473 |
:10356000A0912304B0912404809301049093020459 |
:10357000A0930304B09304048091290490912A0439 |
:10358000A0912B04B0912C048093090490930A0419 |
:10359000A0930B04B0930C04809125049091260411 |
:1035A000A0912704B0912804809305049093060409 |
:1035B000A0930704B093080480912D0490912E04E9 |
:1035C000A0912F04B091300480930D0490930E04C9 |
:1035D000A0930F04B09310048091390787FF3FC078 |
:1035E000BA85BB23E1F580915F048823C1F5209162 |
:1035F000810730918207293C310524F0C9018052AE |
:10360000934007C0EFEF28333E076CF4C901805E9A |
:103610009C4F220F331F220F331F280F391F309367 |
:103620008207209381072091790730917A07293CFE |
:10363000310524F0C9018052934007C0FFEF2833C1 |
:103640003F076CF4C901805E9C4F220F331F220F8D |
:10365000331F280F391F30937A0720937907209161 |
:1036600046043091470480913507E82FFF27EE0F7D |
:10367000FF1FEB5FF84F8081918182599F4F281780 |
:1036800039071CF42F5F3F4F0CC080819181825914 |
:103690009F4F821793074CF42115310531F02150CB |
:1036A00030403093470420934604209148043091E1 |
:1036B000490480913607E82FFF27EE0FFF1FEB5FCD |
:1036C000F84F8081918182599F4F281739071CF448 |
:1036D0002F5F3F4F0CC08081918182599F4F82178D |
:1036E00093074CF42115310531F0215030403093CF |
:1036F00049042093480420914A0430914B0480915E |
:103700003707E82FFF27EE0FFF1FEB5FF84F808191 |
:10371000918182599F4F281739071CF42F5F3F4F23 |
:103720000CC08081918182599F4F821793074CF47E |
:103730002115310531F02150304030934B04209356 |
:103740004A0420914C0430914D0480913807E82FB1 |
:10375000FF27EE0FFF1FEB5FF84F808191818259A9 |
:103760009F4F281739071CF42F5F3F4F0CC08081F3 |
:10377000918182599F4F821793074CF4211531058F |
:1037800031F02150304030934D0420934C0480910F |
:1037900046049091470497FF05C010924704109289 |
:1037A00046040AC08F3F910539F034F08FEF90E066 |
:1037B0009093470480934604809148049091490473 |
:1037C00097FF05C010924904109248040AC08F3F29 |
:1037D000910539F034F08FEF90E090934904809395 |
:1037E000480480914A0490914B0497FF05C01092C1 |
:1037F0004B0410924A040AC08F3F910539F034F00F |
:103800008FEF90E090934B0480934A0480914C0496 |
:1038100090914D0497FF05C010924D0410924C04F6 |
:103820000AC08F3F910539F034F08FEF90E090930C |
:103830004D0480934C04E2E1CE5E0C94013D109265 |
:103840007A008091C5039091C6039093820780937C |
:1038500081078091C7039091C80390937A07809362 |
:1038600079078091C9039091CA039093A10780932F |
:10387000A0076091CD037091CE03882777FD8095D6 |
:10388000982F2CE030E040E050E00E94563C7093CE |
:103890009E0760939D076091CB037091CC038827AE |
:1038A00077FD8095982F0E94563C7093A8076093EF |
:1038B000A7078091CF039091D003909389078093BD |
:1038C00088078FEE80937A00209146043091470458 |
:1038D00080913507E82FFF27EE0FFF1FEB5FF84FB2 |
:1038E0008081918182599F4F281739071CF42F5FDF |
:1038F0003F4F0CC08081918182599F4F821793075F |
:103900004CF42115310531F02150304030934704FB |
:103910002093460420914804309149048091360751 |
:10392000E82FFF27EE0FFF1FEB5FF84F808191819B |
:1039300082599F4F281739071CF42F5F3F4F0CC047 |
:103940008081918182599F4F821793074CF42115F2 |
:10395000310531F021503040309349042093480420 |
:1039600020914A0430914B0480913707E82FFF27BC |
:10397000EE0FFF1FEB5FF84F8081918182599F4FBF |
:10398000281739071CF42F5F3F4F0CC080819181AD |
:1039900082599F4F821793074CF42115310531F05E |
:1039A0002150304030934B0420934A0420914C0422 |
:1039B00030914D0480913807E82FFF27EE0FFF1F4D |
:1039C000EB5FF84F8081918182599F4F281739070B |
:1039D0001CF42F5F3F4F0CC08081918182599F4F13 |
:1039E000821793074CF42115310531F021503040F6 |
:1039F00030934D0420934C048091460490914704E9 |
:103A000097FF05C010924704109246040AC08F3FEA |
:103A1000910539F034F08FEF90E090934704809354 |
:103A20004604809148049091490497FF05C0109284 |
:103A30004904109248040AC08F3F910539F034F0D0 |
:103A40008FEF90E0909349048093480480914A045A |
:103A500090914B0497FF05C010924B0410924A04BA |
:103A60000AC08F3F910539F034F08FEF90E09093CA |
:103A70004B0480934A0480914C0490914D0497FF2D |
:103A800005C010924D0410924C040AC08F3F91055E |
:103A900039F034F08FEF90E090934D0480934C0414 |
:103AA00060915C0777278827992724EC39E040E06C |
:103AB00050E00E94563C6093870370938803809384 |
:103AC000890390938A0360938B0370938C03809394 |
:103AD0008D0390938E0308951F9380913C078B3F35 |
:103AE00098F08B3F19F4809146040EC08C3F19F476 |
:103AF0008091480409C08D3F19F480914A0404C0A4 |
:103B00008E3F21F480914C04809394038091940320 |
:103B1000882319F41092940304C08F3F11F480930A |
:103B2000940380913B078B3F98F08B3F19F4809171 |
:103B300046040EC08C3F19F48091480409C08D3FA3 |
:103B400019F480914A0404C08E3F21F480914C0402 |
:103B50008093930380919303882319F41092930325 |
:103B600005C0843618F084E68093930380913D0766 |
:103B70008B3F98F08B3F19F4809146040EC08C3F28 |
:103B800019F48091480409C08D3F19F480914A04CA |
:103B900004C08E3F21F480914C0480939503809162 |
:103BA0009503882319F41092950305C0843618F004 |
:103BB00084E68093950380913F078B3F98F08B3F7D |
:103BC00019F4809146040EC08C3F19F4809148048A |
:103BD00009C08D3F19F480914A0404C08E3F21F43E |
:103BE00080914C048093960380919603882319F466 |
:103BF0001092960304C08F3F11F480939603809136 |
:103C000046078B3F98F08B3F19F4809146040EC015 |
:103C10008C3F19F48091480409C08D3F19F48091BC |
:103C20004A0404C08E3F21F480914C048093970392 |
:103C300080919703882319F41092970304C08F3F53 |
:103C400011F480939703809147078B3F98F08B3F47 |
:103C500019F4809146040EC08C3F19F480914804F9 |
:103C600009C08D3F19F480914A0404C08E3F21F4AD |
:103C700080914C0480939803809198038B3010F4CA |
:103C80008AE002C08F3F11F4809398038091480727 |
:103C90008B3F98F08B3F19F4809146040EC08C3F07 |
:103CA00019F48091480409C08D3F19F480914A04A9 |
:103CB00004C08E3F21F480914C048093990380913D |
:103CC0009903882319F41092990304C08F3F11F4CB |
:103CD0008093990380914D078B3F98F08B3F19F4A7 |
:103CE000809146040EC08C3F19F48091480409C0AD |
:103CF0008D3F19F480914A0404C08E3F21F48091D5 |
:103D00004C0480939B0380919B03882319F41092A9 |
:103D10009B0304C08F3F11F480939B0380914E0757 |
:103D20008B3F98F08B3F19F4809146040EC08C3F76 |
:103D300019F48091480409C08D3F19F480914A0418 |
:103D400004C08E3F21F480914C04809364048091E0 |
:103D50006404882319F41092640404C08F3F11F4A2 |
:103D60008093640480914F078B3F98F08B3F19F448 |
:103D7000809146040EC08C3F19F48091480409C01C |
:103D80008D3F19F480914A0404C08E3F21F4809144 |
:103D90004C048093650480916504882319F4109283 |
:103DA000650404C08F3F11F480936504809150072F |
:103DB0008B3F98F08B3F19F4809146040EC08C3FE6 |
:103DC00019F48091480409C08D3F19F480914A0488 |
:103DD00004C08E3F21F480914C048093660480914E |
:103DE0006604882319F41092660404C08F3F11F40E |
:103DF00080936604809151078B3F98F08B3F19F4B4 |
:103E0000809146040EC08C3F19F48091480409C08B |
:103E10008D3F19F480914A0404C08E3F21F48091B3 |
:103E20004C048093670480916704882319F41092EE |
:103E3000670404C08F3F11F4809367048091610789 |
:103E40008B3F98F08B3F19F4809146040EC08C3F55 |
:103E500019F48091480409C08D3F19F480914A04F7 |
:103E600004C08E3F21F480914C04809368048091BB |
:103E70006804882319F41092680404C08F3F11F479 |
:103E800080936804809162078B3F98F08B3F19F410 |
:103E9000809146040EC08C3F19F48091480409C0FB |
:103EA0008D3F19F480914A0404C08E3F21F4809123 |
:103EB0004C048093690480916904882319F410925A |
:103EC000690404C08F3F11F48093690480916307F3 |
:103ED0008B3F98F08B3F19F4809146040EC08C3FC5 |
:103EE00019F48091480409C08D3F19F480914A0467 |
:103EF00004C08E3F21F480914C0480936A04809129 |
:103F00006A04882319F410926A0404C08F3F11F4E4 |
:103F100080936A04809164078B3F98F08B3F19F47B |
:103F2000809146040EC08C3F19F48091480409C06A |
:103F30008D3F19F480914A0404C08E3F21F4809192 |
:103F40004C0480936B0480916B04882319F41092C5 |
:103F50006B0404C08F3F11F480936B04809152076F |
:103F60008B3F98F08B3F19F4809146040EC08C3F34 |
:103F700019F48091480409C08D3F19F480914A04D6 |
:103F800004C08E3F21F480914C0480939C03809167 |
:103F90009C03882319F410929C0304C08F3F11F4F2 |
:103FA00080939C03809157078B3F98F08B3F19F4C7 |
:103FB000809146040EC08C3F19F48091480409C0DA |
:103FC0008D3F19F480914A0404C08E3F21F4809102 |
:103FD0004C0480939D0380919D03882319F41092D3 |
:103FE0009D0304C08F3F11F480939D0380915A0775 |
:103FF0008B3F98F08B3F19F4809146040EC08C3FA4 |
:1040000019F48091480409C08D3F19F480914A0445 |
:1040100004C08E3F21F480914C0480936C04809105 |
:104020006C04882319F410926C0404C08F3F11F4BF |
:1040300080936C0480915B078B3F98F08B3F19F461 |
:10404000809146040EC08C3F19F48091480409C049 |
:104050008D3F19F480914A0404C08E3F21F4809171 |
:104060004C0480936D0480916D04882319F41092A0 |
:104070006D0404C08F3F11F480936D04809160073C |
:104080008B3F98F08B3F19F4809146040EC08C3F13 |
:1040900019F48091480409C08D3F19F480914A04B5 |
:1040A00004C08E3F21F480914C0480939E03809144 |
:1040B0009E03882319F410929E0304C08F3F11F4CD |
:1040C00080939E0310919B03612F772767FD709566 |
:1040D000872F972F0E94943B17FF06C020E030E007 |
:1040E00040E853E40E94EF3A27E137EB41ED58E313 |
:1040F0000E940E3C60938F03709390038093910312 |
:10410000909392038091440780939F078091430787 |
:10411000809383071F91089580915504882301F5AA |
:104120001092800710927B071092980710929A07BE |
:104130008091AE03882311F080937B078091AF03B9 |
:10414000882311F0809380078091B003882311F0B9 |
:1041500080939A078091B103882311F08093980788 |
:1041600080917B0799279093C3068093C206809124 |
:10417000800799279093C5068093C40680919A077B |
:1041800099279093C7068093C60680919807992730 |
:104190009093C9068093C8061092E8031092E90331 |
:1041A0000E946C1508951092FA031092F903109270 |
:1041B000FC031092FB0380E090E0A0E0B0E080936D |
:1041C000FD039093FE03A093FF03B09300041092AD |
:1041D000F0031092EF031092F2031092F103109289 |
:1041E000F4031092F30310926C0410926D040E9479 |
:1041F0001F1C84E690E00E94010E0E941F1C80910B |
:10420000390780FF10C080910E0390910F03875BE8 |
:10421000934038F480910E0390910F038E5E92408C |
:1042200010F40E9495104091C5035091C60350931D |
:10423000F0034093EF032091C7033091C8033093FC |
:10424000F2032093F1038091C9039091CA039093E4 |
:10425000F4038093F3033093F6032093F503509314 |
:10426000F8034093F70344E050E0DA010E94223D56 |
:10427000802D853038F18091A7079091A80797FF8E |
:1042800003C0909581959F4F6CE070E00E94953C33 |
:104290007093FC036093FB0380919D0790919E07B0 |
:1042A00097FF03C0909581959F4F6CE070E00E944E |
:1042B000953C7093FA036093F9036091ED06709159 |
:1042C000EE0639C0DA010E94223D802D4F5F5F4F1C |
:1042D000DA010E94223D202D9927982F8827820FEE |
:1042E000911D9093FA038093F9034F5F5F4FDA01BA |
:1042F0000E94223D802D4F5F5F4FDA010E94223DD8 |
:10430000202D9927982F8827820F911D9093FC03C9 |
:104310008093FB034F5F5F4FDA010E94223D602DC7 |
:104320004F5F5F4FDA010E94223D202D7727762FC5 |
:104330006627620F711D882777FD8095982F0E9450 |
:10434000943B6093FD037093FE038093FF0390936F |
:10435000000410922104109222041092230410925F |
:10436000240410922504109226041092270410921F |
:1043700028041092290410922A0410922B041092FF |
:104380002C0410922D0410922E0410922F041092DF |
:1043900030041092310410923204109233041092BF |
:1043A0003404109282071092810710927A071092BB |
:1043B00079071092A1071092A00780910A039091AB |
:1043C0000B03A0910C03B0910D039093F006809322 |
:1043D000EF061092D8031092D7031092390410926E |
:1043E0003A0410923B0410923C0480913D04909159 |
:1043F0003E049093400480933F040E94ED3682E394 |
:1044000090E09093C1038093C00360915C0777278D |
:104410008827992724EC39E040E050E00E94563C80 |
:1044200060938703709388038093890390938A0332 |
:1044300060915D077727882799270E94563C6093F3 |
:104440008B0370938C0380938D0390938E03109253 |
:10445000A00310929F0308951F93182F0EC0809100 |
:104460005504882361F484E690E09093C10380931F |
:10447000C0038AEF90E00E94170E115080F71F9141 |
:10448000089581E08093310752E05093320743E072 |
:104490004093330774E07093340765E06093350709 |
:1044A00086E08093360787E08093370798E0909303 |
:1044B000380780EC809339078EE180933A078BEFC1 |
:1044C00080933C073AE030933D0722E320933B077B |
:1044D00020933F0750933E074093400710924107B7 |
:1044E000909342078FE0809343078AEF80934407BD |
:1044F0008AE18093450780E88093460788EC8093A3 |
:1045000047078FEA809348078EE58093490783E247 |
:1045100080934A0784E180934B0710924C073093B5 |
:104520004D0780E580934E0710924F071092500779 |
:104530001092510710926107109262071092630760 |
:104540001092640794E69093520788E28093530791 |
:10455000109266072093540786E98093550760936D |
:104560005607209357078AE58093580720935907E9 |
:104570001092650790935A0730935B0790935C07FE |
:1045800090935D0790935E0770935F072093600799 |
:10459000ABE6B7E0ECE6F3E08CE001900D928150E1 |
:1045A000E1F7089581E08093310792E0909332071C |
:1045B00083E08093330744E04093340755E0509301 |
:1045C000350786E08093360787E08093370788E0D9 |
:1045D0008093380780E4809339078EE180933A070F |
:1045E0008BEF80933C073AE030933D0722E3209322 |
:1045F0003B0720933F0790933E074093400710925C |
:104600004107309342078FE0809343078AEF8093FE |
:1046100044078AE18093450780E8809346078FEA44 |
:1046200080934707809348078EE58093490783E28C |
:1046300080934A0784E180934B0710924C0780E2F5 |
:1046400080934D0780E580934E0710924F0710929C |
:104650005007109251071092610710926207109252 |
:1046600063071092640794E69093520788E2809360 |
:104670005307109266072093540786E980935507E5 |
:1046800050935607209357078AE580935807209345 |
:1046900059071092650790935A0730935B079093E0 |
:1046A0005C0790935D0790935E0740935F078BE4F0 |
:1046B00080936007ABE6B7E0E6E7F3E08CE00190BB |
:1046C0000D928150E1F7089581E08093310782E0F7 |
:1046D0008093320783E08093330734E030933407CC |
:1046E00065E06093350786E08093360787E0809326 |
:1046F000370798E09093380780E4809339078EE17C |
:1047000080933A078BEF80933C075AE050933D0724 |
:1047100022E320933B0720933F0730933E073093DB |
:104720004007909341078EE0809342078FE080938B |
:1047300043078AEF809344078AE18093450790E816 |
:104740009093460788E78093470746E940934807D8 |
:104750008EE58093490783E280934A0784E1809342 |
:104760004B0710924C0780E280934D0790934E07C1 |
:1047700010924F0710925007109251071092610744 |
:1047800010926207109263071092640794E6909368 |
:10479000520788E2809353071092660720935407CC |
:1047A0004093550760935607209357078AE58093F7 |
:1047B0005807209359071092650790935A07509312 |
:1047C0005B0790935C0790935D0720935E0730939F |
:1047D0005F0790936007ABE6B7E0EEE7F3E08CE0AD |
:1047E00001900D928150E1F70895A6E3B0E0EBEF60 |
:1047F000F3E20C94E53C0E94EF16299AE09133070E |
:10480000FF27EE0FFF1FEB5FF84F0190F081E02DC7 |
:10481000E858FF4F80919F0799274497E817F907B9 |
:104820000CF4CF019A83898397FF02C01A82198200 |
:1048300080914E04843608F05DC080910301882386 |
:1048400099F480910403909105038F5F9F4F61F469 |
:1048500088E99AE39093C1038093C00380E09CE0D1 |
:1048600090930503809304038091930490919404A2 |
:10487000009731F00197909394048093930404C0BF |
:104880001092550410924404809100018A3011F472 |
:10489000289A01C0289880918E0490918F04815DA0 |
:1048A000974028F180914A07482F55275A8349831A |
:1048B00081E080934404E0913107FF27EE0FFF1F52 |
:1048C000EB5FF84F11821082E0913207FF27EE0F65 |
:1048D000FF1FEB5FF84F11821082E0913407FF2732 |
:1048E000EE0FFF1FEB5FF84F118210824FC2109244 |
:1048F00055044CC280914E048D3808F447C2109282 |
:10490000440480914B0722E3829FC00111249093BD |
:1049100094048093930489819A8189976CF08091A3 |
:104920008E0490918F04AFEF8F3F9A0781F101962B |
:1049300090938F0480938E0480918E0490918F04C5 |
:10494000883C910520F0E981FA81B89704F510922E |
:10495000AD041092AE041092AF041092B004109205 |
:10496000A9041092AA041092AB041092AC04109205 |
:1049700031041092320410923304109234041092D5 |
:1049800035041092360410923704109238042981AD |
:104990003A81293C31050CF459C180915504882392 |
:1049A00009F0F4C180913407E82FFF27EE0FFF1FB5 |
:1049B000EB5FF84F808191818C3491050CF4BCC081 |
:1049C000809192048F5F80939204893C08F4DEC149 |
:1049D0002998109255041092920410928F0410920C |
:1049E0008E0480913107282F3327F901EE0FFF1F26 |
:1049F000EB5FF84F80819181873491059CF4E091C1 |
:104A00003207FF27EE0FFF1FEB5FF84F0190F08199 |
:104A1000E02DF7FF03C0F095E195FF4FE734F10576 |
:104A20000CF46CC080913207682F7727DB01AA0F46 |
:104A3000BB1FAB5FB84F8D919C9111978734910547 |
:104A40003CF0F901EE0FFF1FEB5FF84F8081918181 |
:104A50008D919C918734910564F0F901EE0FFF1F51 |
:104A6000EB5FF84F808191818734910514F042E02B |
:104A700001C041E0FB01EE0FFF1FEB5FF84F8081AB |
:104A80009181863491055CF4F901EE0FFF1FEB5F15 |
:104A9000F84F80819181873491050CF043E0FB0150 |
:104AA000EE0FFF1FEB5FF84F808191818A5B9F4F74 |
:104AB0005CF4F901EE0FFF1FEB5FF84F80819181ED |
:104AC000873491050CF044E0660F771F6B5F784FD9 |
:104AD000DB018D919C918A5B9F4F5CF4220F331F09 |
:104AE0002B5F384FF90180819181863491050CF458 |
:104AF00045E0A2E0B0E0042E0E942F3D80913907EE |
:104B000080FF10C080910E0390910F03875B93404C |
:104B100038F480910E0390910F038E5E924010F452 |
:104B20000E9495100E94E20346E461E377E00E9450 |
:104B30000B040E94D32082C080819181855B9F4FAE |
:104B40000CF081C0809192048F5F80939204893C25 |
:104B500008F41CC129988FEF04E010E0D801082E5A |
:104B60000E942F3D109255041092920410928F04CF |
:104B700010928E040E94D3208091F9039091FA0341 |
:104B800060E071E00E94953CD801062E0E942F3D06 |
:104B90008091F9039091FA0360E071E00E94953CE6 |
:104BA0000F5F1F4FD801082E0E942F3D8091FB03FD |
:104BB0009091FC0360E071E00E94953C0F5F1F4FF5 |
:104BC000D801062E0E942F3D8091FB039091FC039B |
:104BD00060E071E00E94953C0F5F1F4FD801082EE6 |
:104BE0000E942F3D6091FD037091FE038091FF03B1 |
:104BF000909100040E94773BDC01CB0160E071E002 |
:104C00000E94953C0F5F1F4FD801062E0E942F3D3A |
:104C10006091FD037091FE038091FF039091000469 |
:104C20000E94773BDC01CB0160E071E00E94953C83 |
:104C30000F5F1F4FD801082E0E942F3D0E94E203F4 |
:104C40000E942C22A3C010929204A0C0E981FA8194 |
:104C5000B3970CF09BC080913407482F5527FA0179 |
:104C6000EE0FFF1FEB5FF84F80819181855B9F4FB7 |
:104C70000CF06DC0809191048F5F80939104893C0A |
:104C800008F467C088EC8093910481E090E09093F1 |
:104C90008F0480938E0481E0809355041092A504C4 |
:104CA0001092A6041092A7041092A8041092310446 |
:104CB000109232041092330410923404109235048E |
:104CC0001092360410923704109238041092210486 |
:104CD00010922204109223041092240410922904AA |
:104CE00010922A0410922B0410922C04809101043B |
:104CF00090910204A0910304B091040480932504D0 |
:104D000090932604A0932704B0932804809109046B |
:104D100090910A04A0910B04B0910C0480932D048F |
:104D200090932E04A0932F04B09330041092AD04FE |
:104D30001092AE041092AF041092B0041092A90425 |
:104D40001092AA041092AB041092AC0402C010920C |
:104D50009104440F551F4B5F584FDA018D919C9180 |
:104D60008C3491058CF0809190048F5F8093900437 |
:104D7000893C60F01092550488EC80939004109266 |
:104D80008F0410928E0402C01092900480916B03E5 |
:104D9000815080936B0380916B038F3F29F080914A |
:104DA0004404882309F4FCC20E946C1D80913107E1 |
:104DB000A82EBB24D501AA0FBB1FFD01EB5FF84F46 |
:104DC0000190F081E02DFCABEBAB80914007E82E29 |
:104DD000FF24A55EB84F0D90BC91A02DBAA7A9A73E |
:104DE00080914107482E552480913207C82EDD243A |
:104DF000C601880F991FDC01AB5FB84F0D90BC91C5 |
:104E0000A02DB8A7AFA3855E984FFC01208031800C |
:104E1000E0913407AE2FBB27AA0FBB1FAB5FB84F83 |
:104E20000D90BC91A02DBCA3ABA310919803612F52 |
:104E3000772767FD7095872F972F0E94943B17FF68 |
:104E400006C020E030E040E853E40E94EF3A20E062 |
:104E500030E040E251E40E94EF3A20E030E040E8E8 |
:104E60005BE30E940E3C3B014C016093A2077093F0 |
:104E7000A3078093A4079093A50710919903612F2E |
:104E8000772767FD7095872F972F0E94943B17FF18 |
:104E900006C020E030E040E853E40E94EF3A20E012 |
:104EA00030EE4BE257E40E94313B609394077093DD |
:104EB000950780939607909397072091B303222339 |
:104EC00011F40C9418368AE090E09093C10380931B |
:104ED000C003E22FFF27E2FF09C080916404482F3E |
:104EE0005527440F551F440F551F10C0E3FD03C045 |
:104EF00040E050E00BC0809164049927880F991F0F |
:104F0000880F991F44275527481B590B20916E0481 |
:104F100030916F04C901F3E0880F991FFA95E1F70A |
:104F2000821B930B840F951F68E070E00E94953CF4 |
:104F30008B0170936F0460936E04E4FF09C080914D |
:104F40006404482F5527440F551F440F551F0FC0A9 |
:104F5000E5FD02C00C942D36809164049927880FDA |
:104F6000991F880F991F44275527481B590B2091DB |
:104F7000700430917104C90163E0880F991F6A952C |
:104F8000E1F7821B930B840F951F68E070E00E948D |
:104F9000953C7EAB6DAB709371046093700480910F |
:104FA000B203282F332723FF03C082E390E004C01D |
:104FB00022FF07C08EEC9FEF9093730480937204DE |
:104FC00004C0109273041092720421FF09C08091F2 |
:104FD0009F039091A00301969093A00380939F0359 |
:104FE00024FF09C080919F039091A00301979093A3 |
:104FF000A00380939F034BA95CA94E9D90014F9DF8 |
:10500000300D5E9D300D1124A9A5BAA5A49DC00147 |
:10501000A59D900DB49D900D1124280F391FC80136 |
:1050200068E070E00E94953C260F371F3CAB2BAB2D |
:105030003093500420934F04EFA1F8A5EE9D80011A |
:10504000EF9D100DFE9D100D1124249CC001259C88 |
:10505000900D349C900D1124080F191F8DA99EA945 |
:1050600068E070E00E94953C060F171F10935204F1 |
:105070000093510480917204909173042BA13CA180 |
:10508000821B930B909354048093530480913907AF |
:1050900082FF0CC080E090E0A0E0B0E08093940735 |
:1050A00090939507A0939607B093970720E030E080 |
:1050B00040E050E0C401B3010E949E3B882364F4A9 |
:1050C00080E090E0A0E0B0E08093A2079093A30777 |
:1050D000A093A407B093A50720E030E040E050E0A3 |
:1050E000609194077091950780919607909197072A |
:1050F0000E949E3B882364F480E090E0A0E0B0E052 |
:105100008093940790939507A0939607B093970781 |
:1051100080916507682F772784E0882E912C86225E |
:10512000972262FD7FC063FD7DC020910104309114 |
:105130000204409103045091040421368AEE38079A |
:1051400080E0480780E05807E4F0C701B3E0880F2B |
:10515000991FBA95E1F7EBA9FCA9E81BF90BF093AD |
:105160005004E0934F042158384341405040E4F04C |
:10517000C701A4E0880F991FAA95E1F7E81BF90B76 |
:105180000FC0205A35414F4F5F4F74F4C701E3E021 |
:10519000880F991FEA95E1F7EBA9FCA9E80FF91F21 |
:1051A000F0935004E0934F042091090430910A04D5 |
:1051B00040910B0450910C042136FAEE3F07F0E0C9 |
:1051C0004F07F0E05F07F4F0C70173E0880F991F05 |
:1051D0007A95E1F7D801A81BB90BB0935204A093BC |
:1051E00051042158384341405040E4F094E0EE0C23 |
:1051F000FF1C9A95E1F7AE19BF09B0935204A09332 |
:10520000510410C0205A35414F4F5F4F5CF483E08A |
:10521000EE0CFF1C8A95E1F70E0D1F1D1093520432 |
:1052200000935104F601EE0FFF1FEB5FF84F208152 |
:10523000318180915807482F55274217530734F47E |
:10524000892821F081E08093600411C0F601EE0FFF |
:10525000FF1FEB5FF84F2081318180915907DA0100 |
:10526000A81BB1092A173B0714F410926004F60139 |
:10527000EE0FFF1FEB5FF84F80819181AA27BB27BC |
:10528000A41BB50B8A179B0734F463FF04C081E0AD |
:105290008093610417C080916104882399F0CC0C3D |
:1052A000DD1CE5E0F7E0CE0EDF1EF6012081318146 |
:1052B000809159079927841B950B8217930714F443 |
:1052C00010926104F501EE0FFF1FEB5FF84F808134 |
:1052D00091814817590734F460FF04C081E080933E |
:1052E000630415C080916304882389F0F501EE0FF3 |
:1052F000FF1FEB5FF84F2081318180915907FA0140 |
:10530000E81BF1092E173F0714F410926304F5010E |
:10531000EE0FFF1FEB5FF84F808191818A179B078B |
:1053200034F461FF04C081E08093620417C080916F |
:105330006204882399F0AA0CBB1C25E037E0A20E7A |
:10534000B31ED5012D913C91809159079927841B5B |
:10535000950B8217930714F41092620480916004F5 |
:10536000882321F480916104882321F081E08093D7 |
:105370005F0402C010925F0480916304882321F4CB |
:1053800080916204882351F081E080935E04109242 |
:105390005F0410926004109261040EC010925E04CB |
:1053A00080915F04882311F40C94313684E690E0F8 |
:1053B0009093C1038093C003809157079927E98197 |
:1053C000FA818E179F0714F49A838983809144048D |
:1053D000882341F110925404109253041092500407 |
:1053E00010924F0410925204109251048DEC9CECD8 |
:1053F000ACECBDE38093A2079093A307A093A4070E |
:10540000B093A5078AE097EDA3EABBE380939407E6 |
:1054100090939507A0939607B093970710925F0417 |
:1054200010925E0420910104309102044091030423 |
:10543000509104042FA738AB49AB5AAB80918C072D |
:1054400090918D07A0918E07B0918F07820F931FC7 |
:10545000A41FB51F80938C0790938D07A0938E0790 |
:10546000B0938F078091090490910A04A0910B04D6 |
:10547000B0910C048BA79CA7ADA7BEA78091900705 |
:1054800090919107A0919207B09193072BA53CA50D |
:105490004DA55EA5820F931FA41FB51F8093900793 |
:1054A00090939107A0939207B0939307809105047E |
:1054B00090910604A0910704B09108048F8F98A3DF |
:1054C000A9A3BAA38091840790918507A09186072C |
:1054D000B09187072F8D38A149A15AA1820F931F40 |
:1054E000A41FB51F8093840790938507A093860718 |
:1054F000B093870780910D0490910E04A0910F0442 |
:10550000B09110048B8F9C8FAD8FBE8F80917C07E4 |
:1055100090917D07A0917E07B0917F072B8D3C8DE8 |
:105520004D8D5E8D820F931FA41FB51F80937C0746 |
:1055300090937D07A0937E07B0937F0790905E04C1 |
:10554000992011F00C94893680915F04882311F022 |
:105550000C9489360C94393680EEA8168FEFB80675 |
:105560008FEFC8068FEFD80644F480EEA82E8FEF99 |
:10557000B82E8FEFC82E8FEFD82E2132310541057E |
:10558000510534F010E2E12EF12C012D112D0DC04A |
:10559000205E3F4F4F4F5F4F44F4B0EEEB2EBFEF16 |
:1055A000FB2EBFEF0B2FBFEF1B2F8091210490919B |
:1055B0002204A0912304B09124048A199B09AC0908 |
:1055C000BD098093210490932204A0932304B093F7 |
:1055D00024048091290490912A04A0912B04B09175 |
:1055E0002C048E199F09A00BB10B80932904909372 |
:1055F0002A04A0932B04B0932C048091D90390919A |
:10560000DA038F3F910509F008F4ADC4992009F041 |
:105610002EC480915F04882309F029C460918C070F |
:1056200070918D0780918E0790918F0720E031E077 |
:1056300040E050E00E94CA3C19012A0120938C07E7 |
:1056400030938D0740938E0750938F07609190079A |
:1056500070919107809192079091930720E031E03B |
:1056600040E050E00E94CA3C2F8B388F498F5A8F00 |
:10567000209390073093910740939207509393079C |
:10568000E0904507FF240027112720911104309155 |
:1056900012044091130450911404C801B7010E94F0 |
:1056A000563C20E031E040E050E00E94CA3C390125 |
:1056B0004A01209311043093120440931304509331 |
:1056C0001404209115043091160440911704509150 |
:1056D0001804C801B7010E94563C20E031E040E0C8 |
:1056E00050E00E94CA3C59016A012093150430938E |
:1056F0001604409317045093180460911904709194 |
:105700001A0480911B0490911C0420E031E040E0D9 |
:1057100050E00E94CA3C2093190430931A0440932D |
:105720001B0450931C04C201B10166197709880952 |
:105730009909E0905E07FF2400271127A80197012F |
:105740000E94CA3C209386043093870440938804C7 |
:1057500050938904CA01B90120E031E040E050E0F3 |
:105760000E94CA3C3E8B2D8B30935D0420935C04D9 |
:105770006F89788D898D9A8D6A197B098C099D09AD |
:10578000A80197010E94CA3C79018A01CA01B901A6 |
:1057900020E031E040E050E00E94CA3C3CAB2BAB43 |
:1057A00030935B0420935A046091840770918507BD |
:1057B000809186079091870720E031E040E050E03B |
:1057C0000E94CA3C20938407309385074093860744 |
:1057D0005093870760917C0770917D0780917E07C9 |
:1057E00090917F0720E031E040E050E00E94CA3C09 |
:1057F00020937C0730937D0740937E0750937F076B |
:105800002F8D38A149A15AA18FA598A9A9A9BAA9F4 |
:10581000281B390B4A0B5B0B298B3A8B4B8B5C8B10 |
:105820002093A1043093A2044093A3045093A404B2 |
:105830002B8D3C8D4D8D5E8D8BA59CA5ADA5BEA5FC |
:10584000281B390B4A0B5B0B2D873E874F87588BE4 |
:1058500020939D0430939E0440939F045093A00492 |
:1058600029893A894B895C892093990430939A0459 |
:1058700040939B0450939C048D859E85AF85B88989 |
:105880008093950490939604A0939704B093980402 |
:105890008091250490912604A0912704B0912804BA |
:1058A000821B930BA40BB50B8093250490932604C5 |
:1058B000A0932704B093280480912D0490912E0486 |
:1058C000A0912F04B09130042D853E854F855889D5 |
:1058D000821B930BA40BB50B80932D0490932E0485 |
:1058E000A0932F04B0933004C401B3012AE130E047 |
:1058F00040E050E00E94CA3C3093CD062093CC0695 |
:10590000C601B5012AE130E040E050E00E94CA3C07 |
:105910003093CF062093CE0649895A895093D106F9 |
:105920004093D0068D859E859093D3068093D206B2 |
:10593000C201B1012AE130E040E050E00E94CA3CDF |
:105940003093D5062093D4066F89788D898D9A8DF2 |
:105950002AE130E040E050E00E94CA3C3093D70694 |
:105960002093D606F092E506E092E4068BA99CA966 |
:10597000880F991F2BA93CA9F3E0220F331FFA953A |
:10598000E1F7820F931F9093E7068093E60681E08C |
:1059900090E09093810480938004809178049091AA |
:1059A0007904A0917A04B0917B0482199309A40927 |
:1059B000B509815E914BAF4FBF4F8F539C49A040BB |
:1059C000B04008F0C5C029893A894B895C892130EB |
:1059D00080E1380780E0480780E058070CF450C0A9 |
:1059E00080917F04882309F447C0DA01C901ECE003 |
:1059F000B595A79597958795EA95D1F701969093D8 |
:105A0000810480938004DA01C90173E0B595A795FC |
:105A1000979587957A95D1F780938604909387041C |
:105A2000A0938804B093890489589341A040B04062 |
:105A300064F088E893E1A0E0B0E08093860490935E |
:105A40008704A0938804B0938904609186047091C0 |
:105A50008704809188049091890420E031E040E03F |
:105A600050E00E94CA3C8D899E89820F931F9093BB |
:105A70005D0480935C0469C081E080937F0465C00D |
:105A800010927F0429893A894B895C89203080EF04 |
:105A900038078FEF48078FEF58070CF056C08091FA |
:105AA0007E04882309F44DC0DA01C901B095A095A0 |
:105AB000909581959F4FAF4FBF4F6CE0B595A795DF |
:105AC000979587956A95D1F7019690938104809375 |
:105AD0008004CA01B90128E030E040E050E00E94B3 |
:105AE000CA3C2093860430938704409388045093E3 |
:105AF000890428573C4E4F4F5F4F64F488E79CEE73 |
:105B0000AFEFBFEF8093860490938704A09388043F |
:105B1000B093890460918604709187048091880411 |
:105B20009091890420E031E040E050E00E94CA3CBE |
:105B3000AD89BE89A20FB31FB0935D04A0935C042E |
:105B40000BC081E080937E0407C010927E0404C0E5 |
:105B5000109281041092800480915F07082F112712 |
:105B600080918004909181040817190724F4109300 |
:105B700081040093800429893A894B895C892150EA |
:105B80003440404050405CF08091EF039091F0032E |
:105B90002091800430918104820F931F13C02989C2 |
:105BA0003A894B895C8920503C4F4F4F5F4F74F4CA |
:105BB0008091EF039091F003209180043091810453 |
:105BC000821B930B9093F0038093EF0381E090E0AE |
:105BD0009093810480938004109282041092830435 |
:105BE000109284041092850480917404909175043D |
:105BF000A0917604B09177042F89388D498D5A8D04 |
:105C0000821B930BA40BB50B815E914BAF4FBF4F23 |
:105C10008F539C49A040B04008F0C6C08D859E853A |
:105C2000AF85B88981509041A040B0400CF454C079 |
:105C300080917D04882309F44BC08D859E85AF85B6 |
:105C4000B8893CE0B595A795979587953A95D1F792 |
:105C5000019690938104809380048D859E85AF8505 |
:105C6000B88923E0B595A795979587952A95D1F79B |
:105C70008093820490938304A0938404B09385045A |
:105C800089589341A040B04064F088E893E1A0E0D7 |
:105C9000B0E08093820490938304A0938404B09333 |
:105CA00085046091820470918304809184049091B2 |
:105CB000850420E031E040E050E00E94CA3C8BA91E |
:105CC0009CA9820F931F90935B0480935A0469C030 |
:105CD00081E080937D0465C010927D042D853E8512 |
:105CE0004F855889203080EF38078FEF48078FEFB6 |
:105CF00058070CF056C080917C04882309F44DC0ED |
:105D0000DA01C901B095A095909581959F4FAF4F4D |
:105D1000BF4FFCE0B595A79597958795FA95D1F774 |
:105D200001969093810480938004CA01B90128E010 |
:105D300030E040E050E00E94CA3C2093820430935F |
:105D40008304409384045093850428573C4E4F4F5E |
:105D50005F4F64F488E79CEEAFEFBFEF809382045F |
:105D600090938304A0938404B0938504609182048B |
:105D700070918304809184049091850420E031E047 |
:105D800040E050E00E94CA3CABA9BCA9A20FB31FDF |
:105D9000B0935B04A0935A040BC081E080937C0411 |
:105DA00007C010927C0404C01092810410928004F9 |
:105DB00080918204909183049093E1068093E006A1 |
:105DC00080918004909181040817190724F410939E |
:105DD0008104009380042D853E854F85588921508C |
:105DE0003440404050405CF08091F1039091F203C8 |
:105DF0002091800430918104820F931F13C02D8560 |
:105E00003E854F85588920503C4F4F4F5F4F74F46B |
:105E10008091F1039091F2032091800430918104EC |
:105E2000821B930B9093F2038093F1038091EF0315 |
:105E30009091F0039093D9068093D8068091F10356 |
:105E40009091F2032091F5033091F603821B930B9E |
:105E50009C01E3E0220F331FEA95E1F7880F991FB9 |
:105E6000820F931F9093DB068093DA0608C010928E |
:105E70005B0410925A0410925D0410925C0420E0BE |
:105E800030E040E050E06091940770919507809178 |
:105E90009607909197070E949E3B882341F41092A9 |
:105EA0005B0410925A0410925D0410925C0480917D |
:105EB0008C0790918D07A0918E07B0918F078093EA |
:105EC000780490937904A0937A04B0937B04809132 |
:105ED000900790919107A0919207B09193078093BA |
:105EE000740490937504A0937604B0937704109291 |
:105EF00011041092120410921304109214041092C0 |
:105F0000150410921604109217041092180410929F |
:105F1000190410921A0410921B0410921C0410927F |
:105F20008C0710928D0710928E0710928F07109297 |
:105F30009007109291071092920710929307109277 |
:105F40008407109285071092860710928707109297 |
:105F50007C0710927D0710927E0710927F071092A7 |
:105F6000DA031092D9038090530490905404940162 |
:105F700097FE04C022273327281939092531310516 |
:105F80003CF08091390784FD03C081E080938A044E |
:105F9000E09042075901CC24B7FCC094DC2CB4013A |
:105FA000882777FD8095982F2E2D33274427552756 |
:105FB0000E94563C9B01AC01C601B5010E94563CB3 |
:105FC00020E032E040E050E00E94CA3C89019A01A2 |
:105FD000FF24E89CC001E99C900DF89C900D1124D1 |
:105FE00064E070E00E94953C600F711F882777FD88 |
:105FF0008095982F6093A5047093A6048093A704BE |
:106000009093A804209131043091320440913304DC |
:1060100050913404261B370B480B590B2093310445 |
:10602000309332044093330450933404213593EC7D |
:10603000390790E0490790E059072CF080E593EC90 |
:10604000A0E0B0E009C0205B3C434F4F5F4F64F4D9 |
:1060500080EB9CE3AFEFBFEF809331049093320469 |
:10606000A0933304B09334048091390783FFA1C017 |
:10607000809143048150809343048F3FD9F40E9460 |
:10608000653790933E0480933D0420913F04309106 |
:106090004004821B930B845E9D4F68E671E00E9472 |
:1060A000953C845B9040909342048093410482E34A |
:1060B0008093430460910104709102048091030471 |
:1060C0009091040420E032E040E050E00E94CA3C9D |
:1060D000890137FF03C0109501951F4F6091090496 |
:1060E00070910A0480910B0490910C0420E032E03E |
:1060F00040E050E00E94CA3CB90137FF03C07095F0 |
:1061000061957F4F601771070CF4B8016332710518 |
:1061100074F480918A04882351F080913D04909119 |
:106120003E049093400480933F0410928A0420918F |
:1061300097033327629FC001639F900D729F900D5C |
:10614000112460E470E00E94953C261B370B121668 |
:1061500013064CF58091410490914204FC012E9F5E |
:10616000C0012F9F900D3E9F900D112460E270E0C2 |
:106170000E94953C882777FD8095982F20913104C7 |
:10618000309132044091330450913404260F371F6C |
:10619000481F591F20933104309332044093330435 |
:1061A0005093340406C084E690E09093C10380933A |
:1061B000C00380918B04815080938B048F3F09F042 |
:1061C00079C088E180938B04E0904507FF24002785 |
:1061D0001127609101047091020480910304909151 |
:1061E0000404A80197010E94CA3C3093AB06209397 |
:1061F000AA066091090470910A0480910B049091A1 |
:106200000C04A80197010E94CA3C3093AD0620936C |
:10621000AC0680919D0790919E079093AF06809366 |
:10622000AE068091A7079091A8079093B10680933E |
:10623000B0068091A0079091A1079093B306809338 |
:10624000B20680915604909157049093B5068093BE |
:10625000B4066091390470913A0480913B049091A6 |
:106260003C0420E032E040E050E00E94CA3C309321 |
:10627000B7062093B60680913D0490913E0490931A |
:10628000BB068093BA06809108039091090390930E |
:10629000BD068093BC0680914E0499279093BF065B |
:1062A0008093BE0680918807909189079093CB06D2 |
:1062B0008093CA0680915E04C0908107D0908207C7 |
:1062C000882391F0B601882777FD8095982F0E944A |
:1062D000943B2091A2073091A3074091A4075091CD |
:1062E000A5070E940E3C2DC060910104709102042C |
:1062F00080910304909104040E94943B20919407A0 |
:106300003091950740919607509197070E940E3C57 |
:106310007B018C01B601882777FD8095982F0E941C |
:10632000943B2091A2073091A3074091A40750917C |
:10633000A5070E940E3C9B01AC01C801B7010E9459 |
:10634000EF3A0E94773B70938207609381078091B8 |
:106350005F04C0907907D0907A07882391F0B60146 |
:10636000882777FD8095982F0E94943B2091A20763 |
:106370003091A3074091A4075091A5070E940E3CBD |
:106380002DC06091090470910A0480910B049091D2 |
:106390000C040E94943B2091940730919507409102 |
:1063A0009607509197070E940E3C7B018C01B60125 |
:1063B000882777FD8095982F0E94943B2091A20713 |
:1063C0003091A3074091A4075091A5070E940E3C6D |
:1063D0009B01AC01C801B7010E94EF3A0E94773BD4 |
:1063E00070937A076093790720909407309095070F |
:1063F00040909607509097076091A0077091A10771 |
:10640000882777FD8095982F0E94943B2091A207C2 |
:106410003091A3074091A4075091A5070E940E3C1C |
:106420007B018C0160911D0470911E0480911F04FA |
:10643000909120040E94943BA20191010E940E3C85 |
:1064400020E030E040E05FE30E940E3C9B01AC01A5 |
:10645000C801B7010E94EF3A0E94773B8B0170930D |
:10646000A1076093A007E0907907F0907A07F09277 |
:10647000E306E092E2066091090470910A048091BB |
:106480000B0490910C040E94943BA20191010E9484 |
:106490000E3C69877A878B879C870E94773B709335 |
:1064A000DD066093DC0620915104309152043EA336 |
:1064B0002DA33093E9062093E806809181079091FF |
:1064C000820738E0813093071CF080E098E005C037 |
:1064D0008050984F34F480E098EF90938207809337 |
:1064E000810751E0E51658E0F5061CF080E098E0E1 |
:1064F00007C080E0E81688EFF80634F480E098EFF3 |
:1065000090937A078093790798E0013019071CF07F |
:1065100080E098E005C00050184F34F480E098EF18 |
:106520009093A1078093A00780913907992780FF56 |
:10653000D9C04091940381FF0EC0423310F5809181 |
:1065400056049091570444979093590480935804AB |
:106550001092450419C020919F033091A003240F8D |
:10656000311D80913E079927FC012E9FC0012F9F6E |
:10657000900D3E9F900D1124449790935904809361 |
:10658000580481E08093450480914404882321F0DD |
:1065900010925904109258042091560430915704D7 |
:1065A0004091580450915904421753070CF09AC077 |
:1065B00080914504882309F495C0241B350B8091F4 |
:1065C00095039927AC01249FC001259F900D349F0E |
:1065D000900D112460E170E00E94953C09811A81C0 |
:1065E000061B170B2091D7033091D803809193039A |
:1065F0009927DC012A9FC0012B9F900D3A9F900D97 |
:10660000112468E070E00E94953C061B170B609116 |
:10661000390470913A0480913B0490913C0420E04D |
:1066200032E040E050E00E94CA3CCA01B90120912A |
:1066300096033327442755270E94563C20E230E03A |
:1066400040E050E00E94CA3CBFEF2E3C3B0714F4F0 |
:106650002EEC3FEF80918C0490918D04AC0164E0AE |
:10666000440F551F6A95E1F7481B590B2333310539 |
:1066700014F022E330E0021B130BCA01800F911FBC |
:1066800060E170E00E94953C70938D0460938C04EF |
:1066900080913A079927681779078CF4E981FA8184 |
:1066A000E817F9072CF090938D0480938C0407C0B1 |
:1066B00029813A8130938D0420938C040DC0809100 |
:1066C0008C0490918D0449815A814817590724F40C |
:1066D00050938D0440938C0480918C0490918D0490 |
:1066E0009A838983A981BA81B093B906A093B80629 |
:1066F000E090A007F090A1070091A5041091A604D6 |
:106700002091A7043091A80480919F07882E992496 |
:1067100054971CF41C821B8229C089819A8162E0F3 |
:1067200070E00E94953C9701201B310BCB0126178E |
:1067300037070CF4C901709561957F4F6817790789 |
:106740000CF4BC01C401E981FA818E1B9F0B681710 |
:1067500079070CF4CB0129813A81281939093C8346 |
:106760002B832817390714F49C838B8360904F0484 |
:10677000709050048091B9049091BA04681A790A13 |
:1067800080918107909182078619970990938B07D2 |
:1067900080938A0720E030E040E050E0C201B10180 |
:1067A0000E949E3B8823D1F16091AD047091AE04AC |
:1067B0008091AF049091B0040E94943B5B016C0106 |
:1067C000609101047091020480910304909104048B |
:1067D0000E94943BA20191010E940E3C7B018C011E |
:1067E000B301882777FD8095982F0E94943B9B01E9 |
:1067F000AC01C801B7010E94EE3A9B01AC01C60191 |
:10680000B5010E94EF3A0E94773B6093AD0470930C |
:10681000AE048093AF049093B0041CC020918A070B |
:1068200030918B07442737FD4095542F8091AD045C |
:106830009091AE04A091AF04B091B004820F931F69 |
:10684000A41FB51F8093AD049093AE04A093AF0432 |
:10685000B093B0048091AD049091AE04A091AF04C8 |
:10686000B091B004181619061A061B0624F40297F4 |
:10687000A109B10903C00296A11DB11D8093AD0409 |
:106880009093AE04A093AF04B093B0048091AD0494 |
:106890009091AE04A091AF04B091B00481383EE372 |
:1068A000930730E0A30730E0B3072CF080E89EE3C5 |
:1068B000A0E0B0E009C08058914CAF4FBF4F64F4E6 |
:1068C00080E891ECAFEFBFEF8093AD049093AE04FE |
:1068D000A093AF04B093B00460918A0770918B07C6 |
:1068E00080918F0390919003A0919103B0919203B6 |
:1068F0008D839E83AF83B887882777FD8095982FF7 |
:106900000E94943B7B018C016091AD047091AE04B8 |
:106910008091AF049091B0040E94943B9B01AC0124 |
:106920006D817E818F8198850E940E3C9B01AC0118 |
:10693000C801B7010E94EF3A0E94773B5B016C01EE |
:106940007CAB6BAB80919E03E82EFF2400271127C0 |
:106950008B819C8197FF03C0909581959F4F62E04A |
:1069600070E00E94953C9B01A981BA812A0F3B1FD0 |
:10697000442737FD4095542FC801B7010E94563C6B |
:1069800020E430E040E050E00E94CA3C3901EBA92D |
:10699000FCA9E217F3070CF49501AA24BB24A6185E |
:1069A000B708A501A216B3060CF4A90189819A8142 |
:1069B0002B813C81820F931F840F951F97FF03C08B |
:1069C00020E030E005C09401881599050CF49C0185 |
:1069D00080918307C82EDD24C601C216D3060CF4AD |
:1069E000C90180937B0789819A81841B950B4B8118 |
:1069F0005C81840F951F97FF03C020E030E005C045 |
:106A00009401881599050CF49C01C601C216D306A1 |
:106A10000CF4C901809380078091BB049091BC0461 |
:106A2000ADA1BEA1A81BB90BBCABABAB80917907E4 |
:106A300090917A078A1B9B0B909378078093770736 |
:106A400020E030E040E050E0C201B1010E949E3BF6 |
:106A5000882371F16091A9047091AA048091AB041C |
:106A60009091AC040E94943B7B018C01EBA9FCA9A2 |
:106A7000BF01882777FD8095982F0E94943B9B014A |
:106A8000AC0169857A858B859C850E94EE3A9B01D5 |
:106A9000AC01C801B7010E94EF3A0E94773B6093B6 |
:106AA000A9047093AA048093AB049093AC041CC017 |
:106AB0002091770730917807442737FD4095542F70 |
:106AC0008091A9049091AA04A091AB04B091AC0468 |
:106AD000820F931FA41FB51F8093A9049093AA044B |
:106AE000A093AB04B093AC048091A9049091AA0444 |
:106AF000A091AB04B091AC04181619061A061B0637 |
:106B000024F40297A109B10903C00296A11DB11D89 |
:106B10008093A9049093AA04A093AB04B093AC040F |
:106B20008091A9049091AA04A091AB04B091AC0407 |
:106B30008138FEE39F07F0E0AF07F0E0BF072CF0DD |
:106B400080E89EE3A0E0B0E009C08058914CAF4FD0 |
:106B5000BF4F64F480E891ECAFEFBFEF8093A904DE |
:106B60009093AA04A093AB04B093AC046091770710 |
:106B700070917807882777FD8095982F0E94943B25 |
:106B80007B018C016091A9047091AA048091AB04EF |
:106B90009091AC040E94943B9B01AC016D817E817D |
:106BA0008F8198850E940E3C9B01AC01C801B70102 |
:106BB0000E94EF3A0E94773B9301661577050CF42B |
:106BC0009B01C501A216B3060CF4C90149815A8183 |
:106BD000480F591FAB81BC814A1B5B0B57FF03C099 |
:106BE00020E030E005C09401481559050CF49A01E5 |
:106BF000A601C216D3060CF4A90140939A07298175 |
:106C00003A81281B390BEB81FC812E1B3F0B37FF90 |
:106C100003C040E050E005C0A401281539050CF47C |
:106C2000A901C601C416D5060CF0D1C0CA01CFC057 |
:106C300020916E0430916F04C90113E0880F991FF1 |
:106C40001A95E1F7821B930B68E070E00E94953C77 |
:106C50008B0170936F0460936E0440E050E00C94DD |
:106C6000B72780915E04882311F40C94E6290C94D4 |
:106C7000DC29E0904507FF24002711276FA578A99C |
:106C800089A99AA9A80197010E94CA3C80919D07F1 |
:106C900090919E07AA2797FDA095BA2F281B390B24 |
:106CA0004A0B5B0BCA01B90120E130E040E050E043 |
:106CB0000E94CA3C59016A016BA57CA58DA59EA5C1 |
:106CC000A80197010E94CA3C8091A7079091A8074C |
:106CD000AA2797FDA095BA2F281B390B4A0B5B0BEF |
:106CE000CA01B90120E130E040E050E00E94CA3C16 |
:106CF00079018A01F1E2AF16B104C104D10414F4A0 |
:106D00000C94AC2AB0E2AB2EB12CC12CD12C0C943B |
:106D1000BD2A1092110410921204109213041092C2 |
:106D20001404109215041092160410921704109275 |
:106D3000180410928C0710928D0710928E071092F3 |
:106D40008F0710929007109291071092920710925D |
:106D5000930710928407109285071092860710926D |
:106D6000870710927C0710927D0710927E07109281 |
:106D70007F078091210490912204A0912304B09177 |
:106D800024048093250490932604A0932704B093B1 |
:106D900028048091290490912A04A0912B04B09199 |
:106DA0002C0480932D0490932E04A0932F04B09371 |
:106DB00030041092DA031092D90310925D041092FD |
:106DC0005C0410925B0410925A040C94FD2A809388 |
:106DD0009807E2E1CA5C0C94013D8091BD0490915A |
:106DE000BE04A091BF04B091C0048093C5049093E9 |
:106DF000C604A093C704B093C8048091C1049091C5 |
:106E0000C204A091C304B091C4048093C9049093B8 |
:106E1000CA04A093CB04B093CC0408951092BA0492 |
:106E20001092B9041092BC041092BB0408951F92F2 |
:106E30000F920FB60F9211242F933F934F938F937E |
:106E40009F938091B707833019F08430A1F508C073 |
:106E50008EB58093CD041EBC84E08093B7072BC011 |
:106E60008091CD049927382F22278EB59927282B7A |
:106E7000392BC9018D509E4F875E9340D0F480918D |
:106E8000BA07853019F0863069F406C03093BC0724 |
:106E90002093BB0786E00BC03093BE072093BD074D |
:106EA00087E005C03093C0072093BF0785E080933B |
:106EB000BA071092B7079F918F914F913F912F91F1 |
:106EC0000F900FBE0F901F901895A0E1B0E0EBE679 |
:106ED000F7E30C94E53CE0905007FF2433E0EE0C20 |
:106EE000FF1C3A95E1F7002711276091010470918A |
:106EF00002048091030490910404A80197010E9468 |
:106F0000CA3C59016A01C9010E94793A6D877E879E |
:106F10008F87988BC5010E94D93A69877A878B87BA |
:106F20009C876091090470910A0480910B049091F0 |
:106F30000C04A80197010E94CA3C79018A01C90189 |
:106F40000E94793A6D837E838F839887C7010E9460 |
:106F5000D93A69837A838B839C83A090BB07B090D6 |
:106F6000BC078091AE07992787FD9095A81AB90AAA |
:106F70008090BD079090BE078091AF07992787FD4D |
:106F80009095881A990A4090BF075090C007809149 |
:106F9000B007992787FD9095481A590A2090B107A4 |
:106FA0003090B207C090B307D090B407C214D30496 |
:106FB000D0F46090B5077090B6076214730498F42B |
:106FC000710100271127B401882777FD8095982F3C |
:106FD000A80197010E94563C9601442755270E941C |
:106FE000CA3C49011CC02C143D0448F56090B5070B |
:106FF0007090B6076C147D0410F5760100271127F8 |
:10700000B501882777FD8095982FA80197010E94E8 |
:10701000563C9101442755270E94CA3C5901B201B0 |
:10702000882777FD8095982FA80197010E94563CEC |
:107030009301442755270E94CA3C290124C0E090AF |
:10704000B507F090B60700271127B501882777FD0F |
:107050008095982FA80197010E94563C91014427E2 |
:1070600055270E94CA3C5901B401882777FD8095B5 |
:10707000982FA80197010E94563C96014427552756 |
:107080000E94CA3C4901B501882777FD8095982F59 |
:107090000E94943B29853A854B855C850E940E3C75 |
:1070A0005B016C01B401882777FD8095982F0E94C1 |
:1070B000943B7B018C012D813E814F8158850E943C |
:1070C0000E3C2D853E854F8558890E940E3C9B01C4 |
:1070D000AC01C601B5010E94EF3A3B014C01B2017F |
:1070E000882777FD8095982F0E94943B5B016C0167 |
:1070F00029813A814B815C81C801B7010E940E3C15 |
:107100007B018C012D813E814F815885C601B501DF |
:107110000E940E3C9B01AC01C801B7010E94EF3AEE |
:107120000E94773B7B018C0129813A814B815C81F4 |
:10713000C601B5010E940E3C2D853E854F855889BC |
:107140000E940E3C9B01AC01C401B3010E94EE3AC7 |
:107150000E94773BDC01CB01B7010E94D1399C0131 |
:1071600097FF05C088279927821B930B04C088E6E8 |
:1071700091E0821B930BE2E1C05F0C94013D809192 |
:10718000B707813041F0813018F0823049F51CC0DA |
:107190002A9A81E016C02A988091BA07853011F4A6 |
:1071A00081E305C0863011F482E301C083E38EBD24 |
:1071B00088E090E00E94CF0C9093B9078093B807C5 |
:1071C00082E08093B70708958091B8079091B9073E |
:1071D0000E94D80C882321F01EBC83E08093B7075F |
:1071E0000895A0E0B0E0E7EFF8E30C94E73C299ABB |
:1071F000809100018A3011F4289801C0289AAA24AD |
:10720000BB2400E010E088249924EE24FF246624A7 |
:107210007724CC24DD2462E3462E55248091BB07DD |
:107220009091BC07081719072CF40091BB07109127 |
:10723000BC070BC08091BB079091BC078A159B05CA |
:1072400024F4A090BB07B090BC078091BD0790913B |
:10725000BE07E816F9062CF4E090BD07F090BE07D3 |
:107260000BC08091BD079091BE078815990524F445 |
:107270008090BD079090BE078091BF079091C00796 |
:10728000C816D9062CF4C090BF07D090C0070BC019 |
:107290008091BF079091C0078615970524F46090F0 |
:1072A000BF077090C007552081F485B191E0892710 |
:1072B00085B985B192E0892785B982E390E0909302 |
:1072C000C1038093C00352E3552E8AE090E00E94F0 |
:1072D000CF0CEC01CE010E94D80C8823D9F3E091A9 |
:1072E0003307FF27EE0FFF1FEB5FF84F808191817F |
:1072F000843691050CF44A94442011F05A948ECFB0 |
:10730000C8018A199B099093B2078093B107C701FE |
:10731000881999099093B4078093B307C601861919 |
:1073200097099093B6078093B507EEEAF7E0C80196 |
:107330008A0D9B1D62E070E00E94953C6093AE0751 |
:10734000C701880D991D62E070E00E94953C609332 |
:10735000AF07C601860D971D62E070E00E94953C64 |
:107360006093B00789E0A8E6B1E0182E0E943B3D8B |
:10737000E0E1CDB7DEB70C94033D83ED8CBD84B165 |
:10738000846A84B95B9885E08093BA071092B70746 |
:1073900089E0EEEAF7E0A8E6B1E0182E0E942A3D67 |
:1073A00008951F93CF93DF93EC01892B31F461157E |
:1073B000710519F480E090E08EC077FD02C011E005 |
:1073C00001C01FEF209729F48AE51802C00111249B |
:1073D00082C0882777FD8095982F22E330E040E037 |
:1073E00050E00E94563C9E01442737FD4095542FA3 |
:1073F0000E94CA3CF90137FF03C0F095E195FF4FA9 |
:1074000041E0EE30F40734F4E55FFA4F8491282F21 |
:10741000332747C056E1E737F5071CF02AE530E08F |
:1074200040C087E0E637F8071CF029E530E039C0B6 |
:1074300044E0EE37F4071CF028E530E032C053E0BA |
:10744000E433F5071CF027E530E02BC082E0E0389C |
:10745000F8071CF026E530E024C042E0E830F407ED |
:107460001CF025E530E01DC051E0E83BF5071CF0BD |
:1074700024E530E016C081E0EC37F8071CF023E586 |
:1074800030E00FC041E0EF34F4071CF022E530E0BB |
:1074900008C0EB52F1401CF021E530E002C020E5CD |
:1074A00030E01C161D066CF4812F992787FD9095FE |
:1074B000AC01249FC001259F900D349F900D112495 |
:1074C0000AC011162CF484EB90E0821B930B03C0CE |
:1074D000C901845B9040DF91CF911F910895FC0119 |
:1074E00025913491FC01329645915491CA01B9011C |
:1074F0000895A0E0B0E0EFE7FAE30C94EF3C9C01C4 |
:1075000097FD04C041E0C42ED12C06C030952195D2 |
:107510003F4F9FEFC92ED92E2B3531055CF0C901A5 |
:107520008B5590408A35910540F484EB90E0821BA6 |
:10753000930B9C01C1E0D0E010C0C901855B904075 |
:107540008A35910518F4245B304005C088E691E047 |
:10755000821B930B9C01CFEFDFEF220F331F220F13 |
:10756000331FC901875E994F0E946F3A7B018C01DE |
:10757000B601882777FD8095982F0E94943B9B0148 |
:10758000AC01C801B7010E940E3C7B018C01BE0119 |
:10759000882777FD8095982F0E94943B9B01AC0132 |
:1075A000C801B7010E940E3CE8E0CDB7DEB70C94ED |
:1075B0000B3D2AE530E0281B390BC9010E94793ABE |
:1075C0000895FC014150504030F001900616D1F76B |
:1075D0003197CF0108958827992708955058192E7B |
:1075E000EFD001D0D2C0BA1762077307840795079E |
:1075F000B1F188F40EF410940B2EBA2FA02D062EA4 |
:10760000622F202D072E732F302D082E842F402D12 |
:10761000092E952F502DFF275523B9F0591B49F0FE |
:10762000573E98F0469537952795A795F040539586 |
:10763000C9F776F0BA0F621F731F841F30F4879565 |
:1076400077956795B795F040939517FA0F2E0895A3 |
:10765000BF1BBB27BA0B620B730B840BF6CFDEF696 |
:10766000DBC0AED001D091C0552359F0992369F009 |
:107670009F575F57951B33F442F4903811F491589B |
:1076800005C09BC091589F3F09F4C6C0BB27112479 |
:1076900062177307840730F4660F771F881FBB1FBC |
:1076A000915098F311D00F920FD00F920DD0A0E807 |
:1076B0002617370748071B0609F0A048BA2F602D88 |
:1076C0007F918F9100240895A0E80024621773072A |
:1076D0008407B10528F0621B730B840BB1090A2AD9 |
:1076E000660F771F881FBB1FA69581F7089597FB2C |
:1076F00073D09F3738F0FEE9F91B982F872F762F2C |
:107700006B2F05C086C09695879577956795F15044 |
:10771000D0F73EF490958095709561957F4F8F4F8F |
:107720009F4F0895E89403C097FB0EF4F3DFB62F44 |
:10773000672F782F892F9EE9002427C00ED05EF096 |
:1077400004C00BD026F001C008D019F020F48FEF50 |
:10775000089580E0089581E0089597FB092E05269D |
:1077600000F8689430D0E89407FC07C062177307EC |
:107770008407950721F008F40094079498940895DD |
:107780009A95BB0F661F771F881F11249923A1F0BC |
:107790008823B2F79F3F59F0BB0F48F421F4002033 |
:1077A00011F460FF04C06F5F7F4F8F4F9F4F881FA2 |
:1077B0009795879597F908952CC09FEF80EC0895D1 |
:1077C000052E092607FA440F551F5F3F79F0AA27B7 |
:1077D000A51708F051E04795880F991F9F3F31F09A |
:1077E000BB27B91708F091E0879508959F919F9165 |
:1077F0001124E3CF97FB880F991F9F3F31F0BB27E0 |
:10780000B91708F091E0879508959F919F911124F1 |
:10781000D4CF66277727882799270895D1DF01D00D |
:10782000B4CF992339F0552329F09F575F57950F0F |
:1078300013F49AF1F1CF91589F3FE1F3629FA12D8C |
:107840000F92BB27639FA00DB11DEE27729FA00D65 |
:10785000B11DEE1FAF93AA27649FB00DE11D739F6A |
:10786000B00DE11DAA1F6627829FB00DE11DA61F66 |
:107870005527749FE00DA11D551F839FE00DA11D8D |
:10788000561F849FA00D511D852F7A2F6E2F1F909C |
:107890000F9088231AF4939539F48FCF000C111CA4 |
:1078A000BB1F661F771F881F01280895629FD001A4 |
:1078B000739FF001829FE00DF11D649FE00DF11DAB |
:1078C000929FF00D839FF00D749FF00D659FF00D5A |
:1078D0009927729FB00DE11DF91F639FB00DE11D47 |
:1078E000F91FBD01CF0111240895991B79E004C04F |
:1078F000991F961708F0961B881F7A95C9F78095EF |
:107900000895AA1BBB1B51E107C0AA1FBB1FA617E6 |
:10791000B70710F0A61BB70B881F991F5A95A9F738 |
:1079200080959095BC01CD01089597FB092E0726FF |
:107930000AD077FD04D0E5DF06D000201AF4709558 |
:1079400061957F4F0895F6F7909581959F4F089523 |
:10795000A1E21A2EAA1BBB1BFD010DC0AA1FBB1F53 |
:10796000EE1FFF1FA217B307E407F50720F0A21BC5 |
:10797000B30BE40BF50B661F771F881F991F1A9432 |
:1079800069F760957095809590959B01AC01BD015C |
:10799000CF01089597FB092E05260ED057FD04D080 |
:1079A000D7DF0AD0001C38F45095409530952195CA |
:1079B0003F4F4F4F5F4F0895F6F790958095709524 |
:1079C00061957F4F8F4F9F4F08952F923F924F9217 |
:1079D0005F926F927F928F929F92AF92BF92CF925F |
:1079E000DF92EF92FF920F931F93CF93DF93CDB768 |
:1079F000DEB7CA1BDB0B0FB6F894DEBF0FBECDBFE0 |
:107A000009942A88398848885F846E847D848C84B0 |
:107A10009B84AA84B984C884DF80EE80FD800C81B9 |
:107A20001B81AA81B981CE0FD11D0FB6F894DEBF9C |
:107A30000FBECDBFED010895EE0FFF1F0590F4912D |
:107A4000E02D0994F999FECFB2BDA1BDF89A119627 |
:107A500000B40895F7DF01921A94E1F70895F999B7 |
:107A6000FECFB2BDA1BD00BC11960FB6F894FA9A34 |
:107A7000F99A0FBE08950190F2DF1A94E1F7089584 |
:027A8000FFCF36 |
:107A82000A01FF64496E74656772616C4E69636BCB |
:107A920020202020496E74656772616C526F6C6C95 |
:107AA200202020204163634E69636B202020202028 |
:107AB20020202020416363526F6C6C202020202004 |
:107AC200202020204779726F47696572202020208C |
:107AD20020202020486F6568656E576572742020EB |
:107AE200202020204163635A2020202020202020B3 |
:107AF20020202020476173202020202020202020C9 |
:107B0200202020204B6F6D7061737356616C756518 |
:107B1200202020205370616E6E756E672020202019 |
:107B220020202020456D7066616E67202020202075 |
:107B320020202020416E616C6F673131202020208F |
:107B4200202020204D6F746F725F566F726E652019 |
:107B5200202020204D6F746F725F48696E74656ECD |
:107B6200202020204D6F746F725F4C696E6B732002 |
:107B7200202020204D6F746F725F526563687473AA |
:107B8200202020204163635F5A20202020202020D3 |
:107B9200202020204D697474656C4163634E6963D3 |
:107BA2006B2020204D697474656C416363526F6C65 |
:107BB2006C202020496E74656772616C4572724E4A |
:107BC20069636B20496E74656772616C45727252AB |
:107BD2006F6C6C204D697474656C496E744E696388 |
:107BE2006B2020204D697474656C496E74526F6C01 |
:107BF2006C0920004E65757472616C4E69636B206E |
:107C020020202020526F6C6C4F66667365742020B2 |
:107C120020202020496E74526F6C6C2A46616B746E |
:107C22006F722020416E616C6F67323620202020F7 |
:107C320020202020446972656B74417573676C5211 |
:107C42006F6C6C204D65737377657274526F6C6CD8 |
:107C520020202020417573676C65696368526F6CE0 |
:107C62006C202020492D4C616765526F6C6C20207E |
:107C720020202020537469636B526F6C6C2020208B |
:107C820020202020FFFF0A016400007D0000FF0386 |
:107C92000102030405060708090A48616C6C6F209B |
:107CA20057656C7400000000000000000000000036 |
:107CB20000000000000000000000000000000000C2 |
:107CC20000000000000000000000000000000000B2 |
:107CD20000000000000000000000000000000000A2 |
:107CE200000000000000000000000C01426567690E |
:107CF2006E6E657200004E6F726D616C00005370A3 |
:107D02006F72740000640090D0030090D0030017DB |
:107D1200B7D13830FB103A409696020A644664ECBA |
:027D2200FF0060 |
:00000001FF |
/branches/v0.60_MicroMag3_Nick666/V0.67g/FlightCtrl.aps |
---|
0,0 → 1,0 |
<AVRStudio><MANAGEMENT><ProjectName>FlightCtrl</ProjectName><Created>15-May-2007 11:20:41</Created><LastEdit>11-Oct-2007 22:58:54</LastEdit><ICON>241</ICON><ProjectType>0</ProjectType><Created>15-May-2007 11:20:41</Created><Version>4</Version><Build>4, 13, 0, 528</Build><ProjectTypeName>AVR GCC</ProjectTypeName></MANAGEMENT><CODE_CREATION><ObjectFile>default\Flight-Ctrl.elf</ObjectFile><EntryFile></EntryFile><SaveFolder>F:\SVN\MikroKopter\FlightCtrl\branches\V0.64_ZeroWarnings\</SaveFolder></CODE_CREATION><DEBUG_TARGET><CURRENT_TARGET>AVR Simulator</CURRENT_TARGET><CURRENT_PART>ATmega644.xml</CURRENT_PART><BREAKPOINTS></BREAKPOINTS><IO_EXPAND><HIDE>false</HIDE></IO_EXPAND><REGISTERNAMES><Register>R00</Register><Register>R01</Register><Register>R02</Register><Register>R03</Register><Register>R04</Register><Register>R05</Register><Register>R06</Register><Register>R07</Register><Register>R08</Register><Register>R09</Register><Register>R10</Register><Register>R11</Register><Register>R12</Register><Register>R13</Register><Register>R14</Register><Register>R15</Register><Register>R16</Register><Register>R17</Register><Register>R18</Register><Register>R19</Register><Register>R20</Register><Register>R21</Register><Register>R22</Register><Register>R23</Register><Register>R24</Register><Register>R25</Register><Register>R26</Register><Register>R27</Register><Register>R28</Register><Register>R29</Register><Register>R30</Register><Register>R31</Register></REGISTERNAMES><COM>Auto</COM><COMType>0</COMType><WATCHNUM>0</WATCHNUM><WATCHNAMES><Pane0></Pane0><Pane1></Pane1><Pane2></Pane2><Pane3></Pane3></WATCHNAMES><BreakOnTrcaeFull>0</BreakOnTrcaeFull></DEBUG_TARGET><Debugger><Triggers></Triggers></Debugger><AVRGCCPLUGIN><FILES><SOURCEFILE>uart.c</SOURCEFILE><SOURCEFILE>analog.c</SOURCEFILE><SOURCEFILE>eeprom.c</SOURCEFILE><SOURCEFILE>fc.c</SOURCEFILE><SOURCEFILE>GPS.c</SOURCEFILE><SOURCEFILE>main.c</SOURCEFILE><SOURCEFILE>menu.c</SOURCEFILE><SOURCEFILE>printf_P.c</SOURCEFILE><SOURCEFILE>rc.c</SOURCEFILE><SOURCEFILE>timer0.c</SOURCEFILE><SOURCEFILE>twimaster.c</SOURCEFILE><HEADERFILE>uart.h</HEADERFILE><HEADERFILE>_Settings.h</HEADERFILE><HEADERFILE>analog.h</HEADERFILE><HEADERFILE>fc.h</HEADERFILE><HEADERFILE>gps.h</HEADERFILE><HEADERFILE>main.h</HEADERFILE><HEADERFILE>menu.h</HEADERFILE><HEADERFILE>old_macros.h</HEADERFILE><HEADERFILE>printf_P.h</HEADERFILE><HEADERFILE>rc.h</HEADERFILE><HEADERFILE>Settings.h</HEADERFILE><HEADERFILE>timer0.h</HEADERFILE><HEADERFILE>twimaster.h</HEADERFILE></FILES><CONFIGS><CONFIG><NAME>default</NAME><USESEXTERNALMAKEFILE>NO</USESEXTERNALMAKEFILE><EXTERNALMAKEFILE></EXTERNALMAKEFILE><PART>atmega644</PART><HEX>1</HEX><LIST>1</LIST><MAP>1</MAP><OUTPUTFILENAME>Flight-Ctrl.elf</OUTPUTFILENAME><OUTPUTDIR>default\</OUTPUTDIR><ISDIRTY>1</ISDIRTY><OPTIONS><OPTION><FILE>GPS.c</FILE><OPTIONLIST></OPTIONLIST></OPTION><OPTION><FILE>analog.c</FILE><OPTIONLIST></OPTIONLIST></OPTION><OPTION><FILE>eeprom.c</FILE><OPTIONLIST></OPTIONLIST></OPTION><OPTION><FILE>fc.c</FILE><OPTIONLIST></OPTIONLIST></OPTION><OPTION><FILE>main.c</FILE><OPTIONLIST></OPTIONLIST></OPTION><OPTION><FILE>menu.c</FILE><OPTIONLIST></OPTIONLIST></OPTION><OPTION><FILE>printf_P.c</FILE><OPTIONLIST></OPTIONLIST></OPTION><OPTION><FILE>rc.c</FILE><OPTIONLIST></OPTIONLIST></OPTION><OPTION><FILE>timer0.c</FILE><OPTIONLIST></OPTIONLIST></OPTION><OPTION><FILE>twimaster.c</FILE><OPTIONLIST></OPTIONLIST></OPTION><OPTION><FILE>uart.c</FILE><OPTIONLIST></OPTIONLIST></OPTION></OPTIONS><INCDIRS/><LIBDIRS/><LIBS><LIB>libc.a</LIB><LIB>libm.a</LIB></LIBS><LINKOBJECTS/><OPTIONSFORALL>-Wall -gdwarf-2 -Wstrict-prototypes -std=gnu99 -Os -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums -DVERSION_HAUPTVERSION=0 -DVERSION_NEBENVERSION=64 -DVERSION_KOMPATIBEL=5</OPTIONSFORALL><LINKEROPTIONS></LINKEROPTIONS><SEGMENTS/></CONFIG></CONFIGS><LASTCONFIG>default</LASTCONFIG><USES_WINAVR>1</USES_WINAVR><GCC_LOC>C:\Program Files\WinAVR\bin\avr-gcc.exe</GCC_LOC><MAKE_LOC>C:\Program Files\WinAVR\utils\bin\make.exe</MAKE_LOC></AVRGCCPLUGIN><IOView><usergroups/></IOView><Files><File00000><FileId>00000</FileId><FileName>main.c</FileName><Status>1</Status></File00000><File00001><FileId>00001</FileId><FileName>uart.c</FileName><Status>1</Status></File00001><File00002><FileId>00002</FileId><FileName>menu.c</FileName><Status>1</Status></File00002><File00003><FileId>00003</FileId><FileName>timer0.c</FileName><Status>1</Status></File00003><File00004><FileId>00004</FileId><FileName>fc.c</FileName><Status>1</Status></File00004><File00005><FileId>00005</FileId><FileName>fc.h</FileName><Status>1</Status></File00005><File00006><FileId>00006</FileId><FileName>menu.h</FileName><Status>1</Status></File00006><File00007><FileId>00007</FileId><FileName>TWIMASTER.C</FileName><Status>1</Status></File00007><File00008><FileId>00008</FileId><FileName>twimaster.h</FileName><Status>1</Status></File00008><File00009><FileId>00009</FileId><FileName>uart.h</FileName><Status>1</Status></File00009><File00010><FileId>00010</FileId><FileName>_Settings.h</FileName><Status>1</Status></File00010><File00011><FileId>00011</FileId><FileName>analog.h</FileName><Status>1</Status></File00011><File00012><FileId>00012</FileId><FileName>gps.h</FileName><Status>1</Status></File00012><File00013><FileId>00013</FileId><FileName>main.h</FileName><Status>1</Status></File00013><File00014><FileId>00014</FileId><FileName>old_macros.h</FileName><Status>1</Status></File00014><File00015><FileId>00015</FileId><FileName>printf_P.h</FileName><Status>1</Status></File00015><File00016><FileId>00016</FileId><FileName>rc.h</FileName><Status>1</Status></File00016><File00017><FileId>00017</FileId><FileName>Settings.h</FileName><Status>1</Status></File00017><File00018><FileId>00018</FileId><FileName>timer0.h</FileName><Status>1</Status></File00018></Files><Events><Bookmarks></Bookmarks></Events><Trace><Filters></Filters></Trace></AVRStudio> |
/branches/v0.60_MicroMag3_Nick666/V0.67g/GPS.c |
---|
0,0 → 1,30 |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Copyright (c) 04.2007 Holger Buss |
// + only for non-profit use |
// + www.MikroKopter.com |
// + see the File "License.txt" for further Informations |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
#include "main.h" |
signed int GPS_Nick = 0; |
signed int GPS_Roll = 0; |
long GpsAktuell_X = 0; |
long GpsAktuell_Y = 0; |
long GpsZiel_X = 0; |
long GpsZiel_Y = 0; |
void GPS_Neutral(void) |
{ |
GpsZiel_X = GpsAktuell_X; |
GpsZiel_Y = GpsAktuell_Y; |
} |
void GPS_BerechneZielrichtung(void) |
{ |
GPS_Nick = 0; |
GPS_Roll = 0; |
} |
/branches/v0.60_MicroMag3_Nick666/V0.67g/License.txt |
---|
0,0 → 1,52 |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Copyright (c) 04.2007 Holger Buss |
// + Nur für den privaten Gebrauch |
// + www.MikroKopter.com |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Es gilt für das gesamte Projekt (Hardware, Software, Binärfiles, Sourcecode und Dokumentation), |
// + dass eine Nutzung (auch auszugsweise) nur für den privaten und nichtkommerziellen Gebrauch zulässig ist. |
// + Sollten direkte oder indirekte kommerzielle Absichten verfolgt werden, ist mit uns (info@mikrokopter.de) Kontakt |
// + bzgl. der Nutzungsbedingungen aufzunehmen. |
// + Eine kommerzielle Nutzung ist z.B.Verkauf von MikroKoptern, Bestückung und Verkauf von Platinen oder Bausätzen, |
// + Verkauf von Luftbildaufnahmen, usw. |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Werden Teile des Quellcodes (mit oder ohne Modifikation) weiterverwendet oder veröffentlicht, |
// + unterliegen sie auch diesen Nutzungsbedingungen und diese Nutzungsbedingungen incl. Copyright müssen dann beiliegen |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Sollte die Software (auch auszugesweise) oder sonstige Informationen des MikroKopter-Projekts |
// + auf anderen Webseiten oder sonstigen Medien veröffentlicht werden, muss unsere Webseite "http://www.mikrokopter.de" |
// + eindeutig als Ursprung verlinkt und genannt werden |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Keine Gewähr auf Fehlerfreiheit, Vollständigkeit oder Funktion |
// + Benutzung auf eigene Gefahr |
// + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Die Portierung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur |
// + mit unserer Zustimmung zulässig |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Redistributions of source code (with or without modifications) must retain the above copyright notice, |
// + this list of conditions and the following disclaimer. |
// + * Neither the name of the copyright holders nor the names of contributors may be used to endorse or promote products derived |
// + from this software without specific prior written permission. |
// + * The use of this project (hardware, software, binary files, sources and documentation) is only permittet |
// + for non-profit use (directly or indirectly) |
// + Commercial use (for excample: selling of MikroKopters, selling of PCBs, assembly, ...) is only permitted |
// + with our written permission |
// + * If sources or documentations are redistributet, our webpage (http://www.MikroKopter.de) must be |
// + clearly linked and named as origin |
// + * porting to systems other than hardware from www.mikrokopter.de is not allowed |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
// + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
// + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
// + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
// + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
// + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
// + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
// + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
// + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
// + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
// + POSSIBILITY OF SUCH DAMAGE. |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
/branches/v0.60_MicroMag3_Nick666/V0.67g/Settings.h |
---|
--- _Settings.h (nonexistent) |
+++ _Settings.h (revision 554) |
@@ -0,0 +1,50 @@ |
+// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// Testmodi |
+// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+#define MOTOR_OFF 0 |
+#define MOTOR_TEST 0 |
+ |
+// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// Abstimmung |
+// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+#define ACC_AMPLIFY 12 |
+#define FAKTOR_P 1 |
+#define FAKTOR_I 0.0001 |
+ |
+ |
+// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// Debug-Interface |
+// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+#define SIO_DEBUG 1 // Soll der Debugger aktiviert sein? |
+#define MIN_DEBUG_INTERVALL 500 // in diesem Intervall werden Degugdaten ohne Aufforderung gesendet |
+ |
+// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// Sender |
+// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+ #define K_NICK 0 |
+ #define K_ROLL 1 |
+ #define K_GAS 2 |
+ #define K_GIER 3 |
+ #define K_POTI1 4 |
+ #define K_POTI2 5 |
+ #define K_POTI3 6 |
+ #define K_POTI4 7 |
+// +++++++++++++++++++++++++++++++ |
+// + Getestete Settings: |
+// +++++++++++++++++++++++++++++++ |
+// Setting: Kamera |
+// Stick_P:3 |
+// Stick_D:0 |
+// Gyro_P: 175 |
+// Gyro_I: 175 |
+// Ki_Anteil: 10 |
+// +++++++++++++++++++++++++++++++ |
+// + Getestete Settings: |
+// +++++++++++++++++++++++++++++++ |
+// Setting: Normal |
+// Stick_P:2 |
+// Stick_D:8 |
+// Gyro_P: 80 |
+// Gyro_I: 150 |
+// Ki_Anteil: 5 |
+ |
/branches/v0.60_MicroMag3_Nick666/V0.67g/analog.c |
---|
0,0 → 1,147 |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Copyright (c) 04.2007 Holger Buss |
// + only for non-profit use |
// + www.MikroKopter.com |
// + see the File "License.txt" for further Informations |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
#include "main.h" |
volatile int Aktuell_Nick,Aktuell_Roll,Aktuell_Gier,Aktuell_ax, Aktuell_ay,Aktuell_az, UBat = 100; |
volatile int AdWertNick = 0, AdWertRoll = 0, AdWertGier = 0; |
volatile int AdWertAccRoll = 0,AdWertAccNick = 0,AdWertAccHoch = 0; |
volatile char MessanzahlNick = 0, MessanzahlRoll = 0, MessanzahlGier = 0; |
volatile char messanzahl_AccNick = 0, messanzahl_AccRoll = 0, messanzahl_AccHoch = 0; |
volatile long Luftdruck = 32000; |
volatile int StartLuftdruck; |
volatile unsigned int MessLuftdruck = 1023; |
unsigned char DruckOffsetSetting; |
volatile int HoeheD = 0; |
volatile char messanzahl_Druck; |
volatile int tmpLuftdruck; |
volatile unsigned int ZaehlMessungen = 0; |
//####################################################################################### |
// |
void ADC_Init(void) |
//####################################################################################### |
{ |
ADMUX = 0;//Referenz ist extern |
ADCSRA=(1<<ADEN)|(1<<ADSC)|(1<<ADATE)|(1<<ADPS2)|(1<<ADPS1)|(1<<ADPS0)|(1<<ADIE); |
//Free Running Mode, Division Factor 128, Interrupt on |
} |
void SucheLuftruckOffset(void) |
{ |
unsigned int off; |
off = eeprom_read_byte(&EEPromArray[EEPROM_ADR_LAST_OFFSET]); |
if(off > 20) off -= 10; |
OCR0A = off; |
Delay_ms_Mess(100); |
if(MessLuftdruck < 850) off = 0; |
for(; off < 250;off++) |
{ |
OCR0A = off; |
Delay_ms_Mess(50); |
printf("."); |
if(MessLuftdruck < 900) break; |
} |
eeprom_write_byte(&EEPromArray[EEPROM_ADR_LAST_OFFSET], off); |
DruckOffsetSetting = off; |
Delay_ms_Mess(300); |
} |
//####################################################################################### |
// |
SIGNAL(SIG_ADC) |
//####################################################################################### |
{ |
static unsigned char kanal=0,state = 0; |
static unsigned int gier1, roll1, nick1; |
ANALOG_OFF; |
switch(state++) |
{ |
case 0: |
gier1 = ADC; |
kanal = 1; |
ZaehlMessungen++; |
break; |
case 1: |
roll1 = ADC; |
kanal = 2; |
break; |
case 2: |
nick1 = ADC; |
kanal = 4; |
break; |
case 3: |
UBat = (3 * UBat + ADC / 3) / 4;//(UBat + ((ADC * 39) / 256) + 19) / 2; |
kanal = 6; |
break; |
case 4: |
Aktuell_ay = NeutralAccY - ADC; |
AdWertAccRoll = Aktuell_ay; |
kanal = 7; |
break; |
case 5: |
Aktuell_ax = ADC - NeutralAccX; |
AdWertAccNick = Aktuell_ax; |
kanal = 0; |
break; |
case 6: |
if(PlatinenVersion == 10) AdWertGier = (ADC + gier1) / 2; |
else AdWertGier = ADC + gier1; |
kanal = 1; |
break; |
case 7: |
if(PlatinenVersion == 10) AdWertRoll = (ADC + roll1) / 2; |
else AdWertRoll = ADC + roll1; |
kanal = 2; |
break; |
case 8: |
if(PlatinenVersion == 10) AdWertNick = (ADC + nick1) / 2; |
else AdWertNick = ADC + nick1; |
//AdWertNick = 0; |
//AdWertNick += Poti2; |
kanal = 5; |
break; |
case 9: |
AdWertAccHoch = (signed int) ADC - NeutralAccZ; |
AdWertAccHoch += abs(Aktuell_ay) / 4 + abs(Aktuell_ax) / 4; |
if(AdWertAccHoch > 1) |
{ |
if(NeutralAccZ < 800) NeutralAccZ+= 0.02; |
} |
else if(AdWertAccHoch < -1) |
{ |
if(NeutralAccZ > 600) NeutralAccZ-= 0.02; |
} |
messanzahl_AccHoch = 1; |
Aktuell_az = ADC; |
Mess_Integral_Hoch += AdWertAccHoch; // Integrieren |
Mess_Integral_Hoch -= Mess_Integral_Hoch / 1024; // dämfen |
kanal = 3; |
break; |
case 10: |
tmpLuftdruck += ADC; |
if(++messanzahl_Druck >= 5) |
{ |
MessLuftdruck = ADC; |
messanzahl_Druck = 0; |
HoeheD = (int)(StartLuftdruck - tmpLuftdruck - HoehenWert); // D-Anteil = neuerWert - AlterWert |
Luftdruck = (tmpLuftdruck + 3 * Luftdruck) / 4; |
HoehenWert = StartLuftdruck - Luftdruck; |
tmpLuftdruck = 0; |
} |
kanal = 0; |
state = 0; |
break; |
default: |
kanal = 0; |
state = 0; |
break; |
} |
ADMUX = kanal; |
if(state != 0) ANALOG_ON; |
} |
/branches/v0.60_MicroMag3_Nick666/V0.67g/analog.h |
---|
0,0 → 1,24 |
/*####################################################################################### |
#######################################################################################*/ |
extern volatile int UBat; |
extern volatile int AdWertNick, AdWertRoll, AdWertGier; |
extern volatile int AdWertAccRoll,AdWertAccNick,AdWertAccHoch; |
extern volatile int Aktuell_Nick,Aktuell_Roll,Aktuell_Gier,Aktuell_ax, Aktuell_ay,Aktuell_az; |
extern volatile long Luftdruck; |
extern volatile char messanzahl_Druck; |
extern volatile unsigned int ZaehlMessungen; |
extern unsigned char DruckOffsetSetting; |
extern volatile int HoeheD; |
extern volatile unsigned int MessLuftdruck; |
extern volatile int StartLuftdruck; |
extern volatile char MessanzahlNick; |
unsigned int ReadADC(unsigned char adc_input); |
void ADC_Init(void); |
void SucheLuftruckOffset(void); |
#define ANALOG_OFF ADCSRA=0 |
#define ANALOG_ON ADCSRA=(1<<ADEN)|(1<<ADSC)|(1<<ADATE)|(1<<ADPS2)|(1<<ADPS1)|(1<<ADPS0)|(1<<ADIE) |
/branches/v0.60_MicroMag3_Nick666/V0.67g/compass.c |
---|
0,0 → 1,240 |
/* |
Copyright 2007, Niklas Nold |
This program (files compass.c and compass.h) is free software; you can redistribute it and/or modify |
it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; |
either version 3 of the License, or (at your option) any later version. |
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; |
without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License |
along with this program. If not, see <http://www.gnu.org/licenses/>. |
Please note: All the other files for the project "Mikrokopter" by H. Buss are under the license (license_buss.txt) published by www.mikrokopter.de |
*/ |
#include "main.h" |
struct MM3_calib_struct ee_calib EEMEM; // Reservierung im EEPROM |
struct MM3_working_struct MM3; |
struct MM3_calib_struct MM3_calib; |
//############################################################################ |
// Initialisierung |
void init_MM3(void) |
//############################################################################ |
{ |
// SPI-Schnittstelle initialisieren |
SPCR = (1<<SPIE)|(1<<SPE)|(1<<MSTR)|(1<<SPR1)|(1<<SPR0); // Interrupt an, Master, 156 kHz Oszillator |
DDRB |= (1<<PB7)|(1<<PB5)|(1<<PB2); // J8, MOSI, SCK Ausgang |
PORTD &= ~(1<<PD3); // J5 permanent auf Low |
// Init Statemachine |
MM3.AXIS = MM3_X; |
MM3.STATE = MM3_RESET; |
// Kalibrierung aus dem EEprom lesen |
eeprom_read_block(&MM3_calib,&ee_calib,sizeof(struct MM3_calib_struct)); |
} |
//############################################################################ |
// Wird in der SIGNAL (SIG_OVERFLOW0) aufgerufen |
void timer0_MM3(void) |
//############################################################################ |
{ |
switch (MM3.STATE) |
{ |
case MM3_RESET: |
PORTB |= (1<<PB2); // J8 auf High, MM3 Reset |
MM3.STATE = MM3_START_TRANSFER; |
return; |
case MM3_START_TRANSFER: |
PORTB &= ~(1<<PB2); // J8 auf Low (war ~125 µs auf High) |
if (MM3.AXIS == MM3_X) SPDR = 0x31; // Schreiben ins SPDR löst automatisch SPI-Übertragung (MOSI und MISO) aus |
else if (MM3.AXIS == MM3_Y) SPDR = 0x32; // Micromag Period Select ist auf 256 (0x30) |
else SPDR = 0x33; //if (MM3.AXIS == MM3_Z) // 1: x-Achse, 2: Y-Achse, 3: Z-Achse |
MM3.DRDY = SetDelay(8); // Laut Datenblatt max. Zeit bis Messung fertig (bei PS 256 eigentlich 4 ms) |
MM3.STATE = MM3_WAIT_DRDY; |
return; |
case MM3_WAIT_DRDY: |
if (CheckDelay(MM3.DRDY)) {SPDR = 0x00;MM3.STATE = MM3_DRDY;} // Irgendwas ins SPDR, damit Übertragung ausgelöst wird, wenn Wartezeit vorbei |
return; // Jetzt gehts weiter in SIGNAL (SIG_SPI) |
} |
} |
//############################################################################ |
// SPI byte ready |
SIGNAL (SIG_SPI) |
//############################################################################ |
{ |
static char tmp; |
int wert; |
switch (MM3.STATE) |
{ |
case MM3_DRDY: // 1. Byte ist da, zwischenspeichern |
tmp = SPDR; |
SPDR = 0x00; // Übertragung von 2. Byte auslösen |
MM3.STATE = MM3_BYTE2; |
return; |
case MM3_BYTE2: // 2. Byte der entsprechenden Achse ist da |
wert = tmp; |
wert <<= 8; // 1. Byte an MSB-Stelle rücken |
wert |= SPDR; // 2. Byte dranpappen |
if(abs(wert) < Max_Axis_Value) // Spikes filtern. Zuweisung nur, wenn Max-Wert nicht überschritten |
switch (MM3.AXIS) |
{ |
case MM3_X: |
MM3.x_axis = wert; |
MM3.AXIS = MM3_Y; |
break; |
case MM3_Y: |
MM3.y_axis = wert; |
MM3.AXIS = MM3_Z; |
break; |
default: //case MM3_Z: |
MM3.z_axis = wert; |
MM3.AXIS = MM3_X; |
} |
MM3.STATE = MM3_RESET; |
} |
} |
//############################################################################ |
// Kompass kalibrieren |
void calib_MM3(void) |
//############################################################################ |
{ |
signed int x_min=0,x_max=0,y_min=0,y_max=0,z_min=0,z_max=0; |
uint8_t measurement=50,beeper=0; |
unsigned int timer; |
GRN_ON; |
ROT_OFF; |
while (measurement) |
{ |
//H_earth = MM3.x_axis*MM3.x_axis + MM3.y_axis*MM3.y_axis + MM3.z_axis*MM3.z_axis; |
if (MM3.x_axis > x_max) x_max = MM3.x_axis; |
else if (MM3.x_axis < x_min) x_min = MM3.x_axis; |
if (MM3.y_axis > y_max) y_max = MM3.y_axis; |
else if (MM3.y_axis < y_min) y_min = MM3.y_axis; |
if (MM3.z_axis > z_max) z_max = MM3.z_axis; |
else if (MM3.z_axis < z_min) z_min = MM3.z_axis; |
if (!beeper) |
{ |
ROT_FLASH; |
GRN_FLASH; |
beeptime = 50; |
beeper = 50; |
} |
beeper--; |
// Schleife mit 100 Hz |
timer = SetDelay(10); |
while(!CheckDelay(timer)); |
// Wenn Gas zurück genommen wird, Kalibrierung mit 1/2 Sekunde Verzögerung beenden |
if (PPM_in[EE_Parameter.Kanalbelegung[K_GAS]] < 100) measurement--; |
} |
// Wertebereich der Achsen |
MM3_calib.X_range = (x_max - x_min); |
MM3_calib.Y_range = (y_max - y_min); |
MM3_calib.Z_range = (z_max - z_min); |
// Offset der Achsen |
MM3_calib.X_off = (x_max + x_min) / 2; |
MM3_calib.Y_off = (y_max + y_min) / 2; |
MM3_calib.Z_off = (z_max + z_min) / 2; |
// und im EEProm abspeichern |
eeprom_write_block(&MM3_calib,&ee_calib,sizeof(struct MM3_calib_struct)); |
} |
//############################################################################ |
// Neigungskompensierung und Berechnung der Ausrichtung |
signed int heading_MM3(void) |
//############################################################################ |
{ |
float sin_nick, cos_nick, sin_roll, cos_roll; |
float x_corr, y_corr; |
signed int x_axis,y_axis,z_axis,heading; |
signed int nicktilt,rolltilt; |
unsigned int div_faktor; |
div_faktor = (uint16_t)EE_Parameter.UserParam3 * 8; |
// Berechung von sinus und cosinus |
nicktilt = (IntegralNick/div_faktor); |
sin_nick = sin_f(nicktilt); |
cos_nick = cos_f(nicktilt); |
rolltilt = (IntegralRoll/div_faktor); |
sin_roll = sin_f(rolltilt); |
cos_roll = cos_f(rolltilt); |
// Offset |
x_axis = (MM3.x_axis - MM3_calib.X_off); |
y_axis = (MM3.y_axis - MM3_calib.Y_off); |
z_axis = (MM3.z_axis - MM3_calib.Z_off); |
// Normierung Wertebereich |
if ((MM3_calib.X_range > MM3_calib.Y_range) && (MM3_calib.X_range > MM3_calib.Z_range)) |
{ |
y_axis = ((long)y_axis * MM3_calib.X_range) / MM3_calib.Y_range; |
z_axis = ((long)z_axis * MM3_calib.X_range) / MM3_calib.Z_range; |
} |
else if ((MM3_calib.Y_range > MM3_calib.X_range) && (MM3_calib.Y_range > MM3_calib.Z_range)) |
{ |
x_axis = ((long)x_axis * MM3_calib.Y_range) / MM3_calib.X_range; |
z_axis = ((long)z_axis * MM3_calib.Y_range) / MM3_calib.Z_range; |
} |
else //if ((MM3_calib.Z_range > MM3_calib.X_range) && (MM3_calib.Z_range > MM3_calib.Y_range)) |
{ |
x_axis = ((long)x_axis * MM3_calib.Z_range) / MM3_calib.X_range; |
y_axis = ((long)y_axis * MM3_calib.Z_range) / MM3_calib.Y_range; |
} |
// Neigungskompensation |
x_corr = x_axis * cos_nick; |
x_corr += y_axis * sin_roll * sin_nick; |
x_corr -= z_axis * cos_roll * sin_nick; |
y_corr = y_axis * cos_roll; |
y_corr += z_axis * sin_roll; |
// Winkelberechnung |
heading = atan2_i(x_corr, y_corr); |
if (heading < 0) heading = -heading; |
else heading = 360 - heading; |
/* |
if (!x_corr && y_corr <0) return (90); |
if (!x_corr && y_corr >0) return (270); |
heading = atan(y_corr/x_corr)*57.29578; |
if (x_corr < 0) heading = 180-heading; |
if (x_corr > 0 && y_corr < 0) heading = -heading; |
if (x_corr > 0 && y_corr > 0) heading = 360 - heading; |
*/ |
return (heading); |
} |
/branches/v0.60_MicroMag3_Nick666/V0.67g/compass.h |
---|
0,0 → 1,44 |
struct MM3_working_struct |
{ |
uint8_t STATE; |
unsigned int DRDY; |
uint8_t AXIS; |
volatile signed int x_axis; |
volatile signed int y_axis; |
volatile signed int z_axis; |
}; |
struct MM3_calib_struct |
{ |
int8_t X_off; |
int8_t Y_off; |
int8_t Z_off; |
uint16_t X_range; |
uint16_t Y_range; |
uint16_t Z_range; |
}; |
extern struct MM3_working_struct MM3; |
extern struct MM3_calib_struct MM3_calib; |
void init_MM3(void); |
void timer0_MM3(void); |
void calib_MM3(void); |
signed int heading_MM3(void); |
#define Max_Axis_Value 500 |
// Die Werte der Statemachine |
#define MM3_RESET 0 |
#define MM3_START_TRANSFER 1 |
#define MM3_WAIT_DRDY 2 |
#define MM3_DRDY 3 |
#define MM3_BYTE2 4 |
#define MM3_X 5 |
#define MM3_Y 6 |
#define MM3_Z 7 |
#define MM3_TILT 8 |
#define MM3_IDLE 9 |
/branches/v0.60_MicroMag3_Nick666/V0.67g/eeprom.c |
---|
0,0 → 1,182 |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Konstanten |
// + 0-250 -> normale Werte |
// + 251 -> Poti1 |
// + 252 -> Poti2 |
// + 253 -> Poti3 |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
void DefaultKonstanten1(void) |
{ |
EE_Parameter.Kanalbelegung[K_NICK] = 1; |
EE_Parameter.Kanalbelegung[K_ROLL] = 2; |
EE_Parameter.Kanalbelegung[K_GAS] = 3; |
EE_Parameter.Kanalbelegung[K_GIER] = 4; |
EE_Parameter.Kanalbelegung[K_POTI1] = 5; |
EE_Parameter.Kanalbelegung[K_POTI2] = 6; |
EE_Parameter.Kanalbelegung[K_POTI3] = 7; |
EE_Parameter.Kanalbelegung[K_POTI4] = 8; |
EE_Parameter.GlobalConfig = CFG_ACHSENKOPPLUNG_AKTIV;//CFG_HOEHENREGELUNG | /*CFG_HOEHEN_SCHALTER |*/ CFG_KOMPASS_AKTIV | CFG_KOMPASS_FIX;//0x01; |
EE_Parameter.Hoehe_MinGas = 30; |
EE_Parameter.MaxHoehe = 251; // Wert : 0-250 251 -> Poti1 |
EE_Parameter.Hoehe_P = 10; // Wert : 0-32 |
EE_Parameter.Luftdruck_D = 50; // Wert : 0-250 |
EE_Parameter.Hoehe_ACC_Wirkung = 50; // Wert : 0-250 |
EE_Parameter.Hoehe_Verstaerkung = 4; // Wert : 0-50 |
EE_Parameter.Stick_P = 4; //2 // Wert : 1-6 |
EE_Parameter.Stick_D = 8; //8 // Wert : 0-64 |
EE_Parameter.Gier_P = 14; // Wert : 1-20 |
EE_Parameter.Gas_Min = 15; // Wert : 0-32 |
EE_Parameter.Gas_Max = 250; // Wert : 33-250 |
EE_Parameter.GyroAccFaktor = 26; // Wert : 1-64 |
EE_Parameter.KompassWirkung = 128; // Wert : 0-250 |
EE_Parameter.Gyro_P = 120; //80 // Wert : 0-250 |
EE_Parameter.Gyro_I = 150; // Wert : 0-250 |
EE_Parameter.UnterspannungsWarnung = 94; // Wert : 0-250 |
EE_Parameter.NotGas = 35; // Wert : 0-250 // Gaswert bei Empangsverlust |
EE_Parameter.NotGasZeit = 20; // Wert : 0-250 // Zeit bis auf NotGas geschaltet wird, wg. Rx-Problemen |
EE_Parameter.UfoAusrichtung = 0; // X oder + Formation |
EE_Parameter.I_Faktor = 32; |
EE_Parameter.UserParam1 = 32 * 4; //zur freien Verwendung |
EE_Parameter.UserParam2 = 0; //zur freien Verwendung |
EE_Parameter.UserParam3 = 0; //zur freien Verwendung |
EE_Parameter.UserParam4 = 0; //zur freien Verwendung |
EE_Parameter.UserParam5 = 0; // zur freien Verwendung |
EE_Parameter.UserParam6 = 0; // zur freien Verwendung |
EE_Parameter.UserParam7 = 0; // zur freien Verwendung |
EE_Parameter.UserParam8 = 0; // zur freien Verwendung |
EE_Parameter.ServoNickControl = 100; // Wert : 0-250 // Stellung des Servos |
EE_Parameter.ServoNickComp = 40; // Wert : 0-250 // Einfluss Gyro/Servo |
EE_Parameter.ServoNickCompInvert = 0; // Wert : 0-250 // Richtung Einfluss Gyro/Servo |
EE_Parameter.ServoNickMin = 50; // Wert : 0-250 // Anschlag |
EE_Parameter.ServoNickMax = 150; // Wert : 0-250 // Anschlag |
EE_Parameter.ServoNickRefresh = 5; |
EE_Parameter.LoopGasLimit = 50; |
EE_Parameter.LoopThreshold = 90; // Wert: 0-250 Schwelle für Stickausschlag |
EE_Parameter.LoopHysterese = 50; |
EE_Parameter.LoopConfig = 0; // Bitcodiert: 0x01=oben, 0x02=unten, 0x04=links, 0x08=rechts / wird getrennt behandelt |
EE_Parameter.AchsKopplung1 = 100; |
EE_Parameter.AchsGegenKopplung1 = 10; |
EE_Parameter.WinkelUmschlagNick = 100; |
EE_Parameter.WinkelUmschlagRoll = 100; |
EE_Parameter.GyroAccAbgleich = 50; // 1/k |
EE_Parameter.Driftkomp = 4; |
EE_Parameter.DynamicStability = 100; |
memcpy(EE_Parameter.Name, "Sport\0", 12); |
} |
void DefaultKonstanten2(void) |
{ |
EE_Parameter.Kanalbelegung[K_NICK] = 1; |
EE_Parameter.Kanalbelegung[K_ROLL] = 2; |
EE_Parameter.Kanalbelegung[K_GAS] = 3; |
EE_Parameter.Kanalbelegung[K_GIER] = 4; |
EE_Parameter.Kanalbelegung[K_POTI1] = 5; |
EE_Parameter.Kanalbelegung[K_POTI2] = 6; |
EE_Parameter.Kanalbelegung[K_POTI3] = 7; |
EE_Parameter.Kanalbelegung[K_POTI4] = 8; |
EE_Parameter.GlobalConfig = CFG_ACHSENKOPPLUNG_AKTIV;//CFG_HOEHENREGELUNG | /*CFG_HOEHEN_SCHALTER |*/ CFG_KOMPASS_AKTIV;//0x01; |
EE_Parameter.Hoehe_MinGas = 30; |
EE_Parameter.MaxHoehe = 251; // Wert : 0-250 251 -> Poti1 |
EE_Parameter.Hoehe_P = 10; // Wert : 0-32 |
EE_Parameter.Luftdruck_D = 50; // Wert : 0-250 |
EE_Parameter.Hoehe_ACC_Wirkung = 50; // Wert : 0-250 |
EE_Parameter.Hoehe_Verstaerkung = 2; // Wert : 0-50 |
EE_Parameter.Stick_P = 4; //2 // Wert : 1-6 |
EE_Parameter.Stick_D = 0; //8 // Wert : 0-64 |
EE_Parameter.Gier_P = 10; // Wert : 1-20 |
EE_Parameter.Gas_Min = 15; // Wert : 0-32 |
EE_Parameter.Gas_Max = 250; // Wert : 33-250 |
EE_Parameter.GyroAccFaktor = 26; // Wert : 1-64 |
EE_Parameter.KompassWirkung = 128; // Wert : 0-250 |
EE_Parameter.Gyro_P = 175; //80 // Wert : 0-250 |
EE_Parameter.Gyro_I = 175; // Wert : 0-250 |
EE_Parameter.UnterspannungsWarnung = 94; // Wert : 0-250 |
EE_Parameter.NotGas = 35; // Wert : 0-250 // Gaswert bei Empangsverlust |
EE_Parameter.NotGasZeit = 20; // Wert : 0-250 // Zeit bis auf NotGas geschaltet wird, wg. Rx-Problemen |
EE_Parameter.UfoAusrichtung = 0; // X oder + Formation |
EE_Parameter.I_Faktor = 32; |
EE_Parameter.UserParam1 = 20 * 4; // zur freien Verwendung |
EE_Parameter.UserParam2 = 0; // zur freien Verwendung |
EE_Parameter.UserParam3 = 0; // zur freien Verwendung |
EE_Parameter.UserParam4 = 0; // zur freien Verwendung |
EE_Parameter.UserParam5 = 0; // zur freien Verwendung |
EE_Parameter.UserParam6 = 0; // zur freien Verwendung |
EE_Parameter.UserParam7 = 0; // zur freien Verwendung |
EE_Parameter.UserParam8 = 0; // zur freien Verwendung |
EE_Parameter.ServoNickControl = 100; // Wert : 0-250 // Stellung des Servos |
EE_Parameter.ServoNickComp = 40; // Wert : 0-250 // Einfluss Gyro/Servo |
EE_Parameter.ServoNickCompInvert = 0; // Wert : 0-250 // Richtung Einfluss Gyro/Servo |
EE_Parameter.ServoNickMin = 50; // Wert : 0-250 // Anschlag |
EE_Parameter.ServoNickMax = 150; // Wert : 0-250 // Anschlag |
EE_Parameter.ServoNickRefresh = 5; |
EE_Parameter.LoopGasLimit = 50; |
EE_Parameter.LoopThreshold = 90; // Wert: 0-250 Schwelle für Stickausschlag |
EE_Parameter.LoopHysterese = 50; |
EE_Parameter.LoopConfig = 0; // Bitcodiert: 0x01=oben, 0x02=unten, 0x04=links, 0x08=rechts |
EE_Parameter.AchsKopplung1 = 100; // Faktor, mit dem Gier die Achsen Roll und Nick verkoppelt |
EE_Parameter.AchsGegenKopplung1 = 10; |
EE_Parameter.WinkelUmschlagNick = 100; |
EE_Parameter.WinkelUmschlagRoll = 100; |
EE_Parameter.GyroAccAbgleich = 100; // 1/k |
EE_Parameter.Driftkomp = 4; |
EE_Parameter.DynamicStability = 75; |
memcpy(EE_Parameter.Name, "Normal\0", 12); |
} |
void DefaultKonstanten3(void) |
{ |
EE_Parameter.Kanalbelegung[K_NICK] = 1; |
EE_Parameter.Kanalbelegung[K_ROLL] = 2; |
EE_Parameter.Kanalbelegung[K_GAS] = 3; |
EE_Parameter.Kanalbelegung[K_GIER] = 4; |
EE_Parameter.Kanalbelegung[K_POTI1] = 5; |
EE_Parameter.Kanalbelegung[K_POTI2] = 6; |
EE_Parameter.Kanalbelegung[K_POTI3] = 7; |
EE_Parameter.Kanalbelegung[K_POTI4] = 8; |
EE_Parameter.GlobalConfig = CFG_DREHRATEN_BEGRENZER | CFG_ACHSENKOPPLUNG_AKTIV;///*CFG_HOEHEN_SCHALTER |*/ CFG_KOMPASS_AKTIV;//0x01; |
EE_Parameter.Hoehe_MinGas = 30; |
EE_Parameter.MaxHoehe = 251; // Wert : 0-250 251 -> Poti1 |
EE_Parameter.Hoehe_P = 10; // Wert : 0-32 |
EE_Parameter.Luftdruck_D = 50; // Wert : 0-250 |
EE_Parameter.Hoehe_ACC_Wirkung = 50; // Wert : 0-250 |
EE_Parameter.Hoehe_Verstaerkung = 2; // Wert : 0-50 |
EE_Parameter.Stick_P = 3; //2 // Wert : 1-6 |
EE_Parameter.Stick_D = 0; //8 // Wert : 0-64 |
EE_Parameter.Gier_P = 8; // Wert : 1-20 |
EE_Parameter.Gas_Min = 15; // Wert : 0-32 |
EE_Parameter.Gas_Max = 250; // Wert : 33-250 |
EE_Parameter.GyroAccFaktor = 26; // Wert : 1-64 |
EE_Parameter.KompassWirkung = 128; // Wert : 0-250 |
EE_Parameter.Gyro_P = 200; //80 // Wert : 0-250 |
EE_Parameter.Gyro_I = 175; // Wert : 0-250 |
EE_Parameter.UnterspannungsWarnung = 94; // Wert : 0-250 |
EE_Parameter.NotGas = 35; // Wert : 0-250 // Gaswert bei Empangsverlust |
EE_Parameter.NotGasZeit = 20; // Wert : 0-250 // Zeit bis auf NotGas geschaltet wird, wg. Rx-Problemen |
EE_Parameter.UfoAusrichtung = 0; // X oder + Formation |
EE_Parameter.I_Faktor = 10; |
EE_Parameter.UserParam1 = 20 * 4; // zur freien Verwendung |
EE_Parameter.UserParam2 = 0; // zur freien Verwendung |
EE_Parameter.UserParam3 = 0; // zur freien Verwendung |
EE_Parameter.UserParam4 = 0; // zur freien Verwendung |
EE_Parameter.UserParam5 = 0; // zur freien Verwendung |
EE_Parameter.UserParam6 = 0; // zur freien Verwendung |
EE_Parameter.UserParam7 = 0; // zur freien Verwendung |
EE_Parameter.UserParam8 = 0; // zur freien Verwendung |
EE_Parameter.ServoNickControl = 100; // Wert : 0-250 // Stellung des Servos |
EE_Parameter.ServoNickComp = 40; // Wert : 0-250 // Einfluss Gyro/Servo |
EE_Parameter.ServoNickCompInvert = 0; // Wert : 0-250 // Richtung Einfluss Gyro/Servo |
EE_Parameter.ServoNickMin = 50; // Wert : 0-250 // Anschlag |
EE_Parameter.ServoNickMax = 150; // Wert : 0-250 // Anschlag |
EE_Parameter.ServoNickRefresh = 5; |
EE_Parameter.LoopGasLimit = 50; |
EE_Parameter.LoopThreshold = 90; // Wert: 0-250 Schwelle für Stickausschlag |
EE_Parameter.LoopHysterese = 50; |
EE_Parameter.LoopConfig = 0; // Bitcodiert: 0x01=oben, 0x02=unten, 0x04=links, 0x08=rechts |
EE_Parameter.AchsKopplung1 = 100; // Faktor, mit dem Gier die Achsen Roll und Nick verkoppelt |
EE_Parameter.AchsGegenKopplung1 = 10; |
EE_Parameter.WinkelUmschlagNick = 100; |
EE_Parameter.WinkelUmschlagRoll = 100; |
EE_Parameter.GyroAccAbgleich = 100; // 1/k |
EE_Parameter.Driftkomp = 4; |
EE_Parameter.DynamicStability = 50; |
memcpy(EE_Parameter.Name, "Beginner\0", 12); |
} |
/branches/v0.60_MicroMag3_Nick666/V0.67g/fc.c |
---|
0,0 → 1,1149 |
/*####################################################################################### |
Flight Control |
#######################################################################################*/ |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Copyright (c) 04.2007 Holger Buss |
// + Nur für den privaten Gebrauch |
// + www.MikroKopter.com |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Es gilt für das gesamte Projekt (Hardware, Software, Binärfiles, Sourcecode und Dokumentation), |
// + dass eine Nutzung (auch auszugsweise) nur für den privaten (nicht-kommerziellen) Gebrauch zulässig ist. |
// + Sollten direkte oder indirekte kommerzielle Absichten verfolgt werden, ist mit uns (info@mikrokopter.de) Kontakt |
// + bzgl. der Nutzungsbedingungen aufzunehmen. |
// + Eine kommerzielle Nutzung ist z.B.Verkauf von MikroKoptern, Bestückung und Verkauf von Platinen oder Bausätzen, |
// + Verkauf von Luftbildaufnahmen, usw. |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Werden Teile des Quellcodes (mit oder ohne Modifikation) weiterverwendet oder veröffentlicht, |
// + unterliegen sie auch diesen Nutzungsbedingungen und diese Nutzungsbedingungen incl. Copyright müssen dann beiliegen |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Sollte die Software (auch auszugesweise) oder sonstige Informationen des MikroKopter-Projekts |
// + auf anderen Webseiten oder sonstigen Medien veröffentlicht werden, muss unsere Webseite "http://www.mikrokopter.de" |
// + eindeutig als Ursprung verlinkt werden |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Keine Gewähr auf Fehlerfreiheit, Vollständigkeit oder Funktion |
// + Benutzung auf eigene Gefahr |
// + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Die Portierung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur |
// + mit unserer Zustimmung zulässig |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Redistributions of source code (with or without modifications) must retain the above copyright notice, |
// + this list of conditions and the following disclaimer. |
// + * Neither the name of the copyright holders nor the names of contributors may be used to endorse or promote products derived |
// + from this software without specific prior written permission. |
// + * The use of this project (hardware, software, binary files, sources and documentation) is only permittet |
// + for non-commercial use (directly or indirectly) |
// + Commercial use (for excample: selling of MikroKopters, selling of PCBs, assembly, ...) is only permitted |
// + with our written permission |
// + * If sources or documentations are redistributet on other webpages, out webpage (http://www.MikroKopter.de) must be |
// + clearly linked as origin |
// + * porting to systems other than hardware from www.mikrokopter.de is not allowed |
// + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
// + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
// + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
// + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
// + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
// + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
// + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
// + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN// + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
// + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
// + POSSIBILITY OF SUCH DAMAGE. |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
#include "main.h" |
#include "eeprom.c" |
unsigned char h,m,s; |
volatile unsigned int I2CTimeout = 100; |
int MesswertNick,MesswertRoll,MesswertGier; |
int AdNeutralNick = 0,AdNeutralRoll = 0,AdNeutralGier = 0,StartNeutralRoll = 0,StartNeutralNick = 0; |
int Mittelwert_AccNick, Mittelwert_AccRoll,Mittelwert_AccHoch; |
volatile int NeutralAccX=0, NeutralAccY=0; |
volatile float NeutralAccZ = 0; |
long IntegralNick = 0,IntegralNick2 = 0; |
long IntegralRoll = 0,IntegralRoll2 = 0; |
long IntegralAccNick = 0,IntegralAccRoll = 0,IntegralAccZ = 0; |
long Integral_Gier = 0; |
long Mess_IntegralNick = 0,Mess_IntegralNick2 = 0; |
long Mess_IntegralRoll = 0,Mess_IntegralRoll2 = 0; |
long Mess_Integral_Gier = 0,Mess_Integral_Gier2 = 0; |
long MittelIntegralNick,MittelIntegralRoll,MittelIntegralNick2,MittelIntegralRoll2; |
long Mess_Integral_Hoch = 0; |
int KompassValue = 0; |
int KompassStartwert = 0; |
int KompassRichtung = 0; |
uint8_t updKompass = 0; |
unsigned char MAX_GAS,MIN_GAS; |
unsigned char Notlandung = 0; |
unsigned char HoehenReglerAktiv = 0; |
long Umschlag180Nick = 250000L, Umschlag180Roll = 250000L; |
float GyroFaktor; |
float IntegralFaktor; |
volatile int DiffNick,DiffRoll; |
int Poti1 = 0, Poti2 = 0, Poti3 = 0, Poti4 = 0; |
volatile unsigned char Motor_Vorne,Motor_Hinten,Motor_Rechts,Motor_Links, Count; |
unsigned char MotorWert[5]; |
volatile unsigned char SenderOkay = 0; |
int StickNick = 0,StickRoll = 0,StickGier = 0; |
char MotorenEin = 0; |
int HoehenWert = 0; |
int SollHoehe = 0; |
int LageKorrekturRoll = 0,LageKorrekturNick = 0; |
float Ki = FAKTOR_I; |
unsigned char Looping_Nick = 0,Looping_Roll = 0; |
unsigned char Looping_Links = 0, Looping_Rechts = 0, Looping_Unten = 0, Looping_Oben = 0; |
unsigned char Parameter_Luftdruck_D = 48; // Wert : 0-250 |
unsigned char Parameter_MaxHoehe = 251; // Wert : 0-250 |
unsigned char Parameter_Hoehe_P = 16; // Wert : 0-32 |
unsigned char Parameter_Hoehe_ACC_Wirkung = 58; // Wert : 0-250 |
unsigned char Parameter_KompassWirkung = 64; // Wert : 0-250 |
unsigned char Parameter_Gyro_P = 150; // Wert : 10-250 |
unsigned char Parameter_Gyro_I = 150; // Wert : 0-250 |
unsigned char Parameter_Gier_P = 2; // Wert : 1-20 |
unsigned char Parameter_I_Faktor = 10; // Wert : 1-20 |
unsigned char Parameter_UserParam1 = 0; |
unsigned char Parameter_UserParam2 = 0; |
unsigned char Parameter_UserParam3 = 0; |
unsigned char Parameter_UserParam4 = 0; |
unsigned char Parameter_UserParam5 = 0; |
unsigned char Parameter_UserParam6 = 0; |
unsigned char Parameter_UserParam7 = 0; |
unsigned char Parameter_UserParam8 = 0; |
unsigned char Parameter_ServoNickControl = 100; |
unsigned char Parameter_LoopGasLimit = 70; |
unsigned char Parameter_AchsKopplung1 = 0; |
unsigned char Parameter_AchsGegenKopplung1 = 0; |
unsigned char Parameter_DynamicStability = 100; |
struct mk_param_struct EE_Parameter; |
signed int ExternStickNick = 0,ExternStickRoll = 0,ExternStickGier = 0, ExternHoehenValue = -20; |
void Piep(unsigned char Anzahl) |
{ |
while(Anzahl--) |
{ |
if(MotorenEin) return; //auf keinen Fall im Flug! |
beeptime = 100; |
Delay_ms(250); |
} |
} |
/* |
//############################################################################ |
// Neutrallage kalibrieren und fest im EEPROM abspeichern |
void calib_acc(void) |
//############################################################################ |
{ |
unsigned int timer; |
acc_neutral.X = 0; |
acc_neutral.Y = 0; |
acc_neutral.Z = 0; |
CalibrierMittelwert(); |
timer = SetDelay(5); |
while (!CheckDelay(timer)); |
CalibrierMittelwert(); |
acc_neutral.X = abs(Mittelwert_AccNick) / ACC_AMPLIFY; |
acc_neutral.Y = abs(Mittelwert_AccRoll) / ACC_AMPLIFY; |
acc_neutral.Z = Aktuell_az; |
eeprom_write_block(&acc_neutral,&ee_acc_neutral,sizeof(struct acc_neutral_struct)); |
} |
*/ |
//############################################################################ |
// Nullwerte ermitteln |
void SetNeutral(void) |
//############################################################################ |
{ |
NeutralAccX = 0; |
NeutralAccY = 0; |
NeutralAccZ = 0; |
AdNeutralNick = 0; |
AdNeutralRoll = 0; |
AdNeutralGier = 0; |
Parameter_AchsKopplung1 = 0; |
Parameter_AchsGegenKopplung1 = 0; |
CalibrierMittelwert(); |
Delay_ms_Mess(100); |
CalibrierMittelwert(); |
if((EE_Parameter.GlobalConfig & CFG_HOEHENREGELUNG)) // Höhenregelung aktiviert? |
{ |
if((MessLuftdruck > 950) || (MessLuftdruck < 750)) SucheLuftruckOffset(); |
} |
AdNeutralNick= AdWertNick; |
AdNeutralRoll= AdWertRoll; |
AdNeutralGier= AdWertGier; |
StartNeutralRoll = AdNeutralRoll; |
StartNeutralNick = AdNeutralNick; |
if(eeprom_read_byte(&EEPromArray[EEPROM_ADR_ACC_NICK]) > 4) |
{ |
NeutralAccY = abs(Mittelwert_AccRoll) / ACC_AMPLIFY; |
NeutralAccX = abs(Mittelwert_AccNick) / ACC_AMPLIFY; |
NeutralAccZ = Aktuell_az; |
} |
else |
{ |
NeutralAccX = (int)eeprom_read_byte(&EEPromArray[EEPROM_ADR_ACC_NICK]) * 256 + (int)eeprom_read_byte(&EEPromArray[EEPROM_ADR_ACC_NICK+1]); |
NeutralAccY = (int)eeprom_read_byte(&EEPromArray[EEPROM_ADR_ACC_ROLL]) * 256 + (int)eeprom_read_byte(&EEPromArray[EEPROM_ADR_ACC_ROLL+1]); |
NeutralAccZ = (int)eeprom_read_byte(&EEPromArray[EEPROM_ADR_ACC_Z]) * 256 + (int)eeprom_read_byte(&EEPromArray[EEPROM_ADR_ACC_Z+1]); |
} |
Mess_IntegralNick = 0; |
Mess_IntegralNick2 = 0; |
Mess_IntegralRoll = 0; |
Mess_IntegralRoll2 = 0; |
Mess_Integral_Gier = 0; |
MesswertNick = 0; |
MesswertRoll = 0; |
MesswertGier = 0; |
StartLuftdruck = Luftdruck; |
HoeheD = 0; |
Mess_Integral_Hoch = 0; |
KompassStartwert = KompassValue; |
GPS_Neutral(); |
beeptime = 50; |
Umschlag180Nick = (long) EE_Parameter.WinkelUmschlagNick * 2500L; |
Umschlag180Roll = (long) EE_Parameter.WinkelUmschlagRoll * 2500L; |
ExternHoehenValue = 0; |
} |
//############################################################################ |
// Bearbeitet die Messwerte |
void Mittelwert(void) |
//############################################################################ |
{ |
static signed long tmpl,tmpl2; |
MesswertGier = (signed int) AdNeutralGier - AdWertGier; |
MesswertRoll = (signed int) AdWertRoll - AdNeutralRoll; |
MesswertNick = (signed int) AdWertNick - AdNeutralNick; |
// Beschleunigungssensor ++++++++++++++++++++++++++++++++++++++++++++++++ |
Mittelwert_AccNick = ((long)Mittelwert_AccNick * 1 + ((ACC_AMPLIFY * (long)AdWertAccNick))) / 2L; |
Mittelwert_AccRoll = ((long)Mittelwert_AccRoll * 1 + ((ACC_AMPLIFY * (long)AdWertAccRoll))) / 2L; |
Mittelwert_AccHoch = ((long)Mittelwert_AccHoch * 1 + ((long)AdWertAccHoch)) / 2L; |
IntegralAccNick += ACC_AMPLIFY * AdWertAccNick; |
IntegralAccRoll += ACC_AMPLIFY * AdWertAccRoll; |
IntegralAccZ += Aktuell_az - NeutralAccZ; |
// Gier ++++++++++++++++++++++++++++++++++++++++++++++++ |
Mess_Integral_Gier += MesswertGier; |
Mess_Integral_Gier2 += MesswertGier; |
// Kopplungsanteil +++++++++++++++++++++++++++++++++++++ |
if(!Looping_Nick && !Looping_Roll && (EE_Parameter.GlobalConfig & CFG_ACHSENKOPPLUNG_AKTIV)) |
{ |
tmpl = Mess_IntegralNick / 4096L; |
tmpl *= MesswertGier; |
tmpl *= Parameter_AchsKopplung1; //125 |
tmpl /= 2048L; |
tmpl2 = Mess_IntegralRoll / 4096L; |
tmpl2 *= MesswertGier; |
tmpl2 *= Parameter_AchsKopplung1; |
tmpl2 /= 2048L; |
} |
else tmpl = tmpl2 = 0; |
// Roll ++++++++++++++++++++++++++++++++++++++++++++++++ |
MesswertRoll += tmpl; |
MesswertRoll += (tmpl2*Parameter_AchsGegenKopplung1)/512L; //109 |
Mess_IntegralRoll2 += MesswertRoll; |
Mess_IntegralRoll += MesswertRoll - LageKorrekturRoll; |
if(Mess_IntegralRoll > Umschlag180Roll) |
{ |
Mess_IntegralRoll = -(Umschlag180Roll - 10000L); |
Mess_IntegralRoll2 = Mess_IntegralRoll; |
} |
if(Mess_IntegralRoll <-Umschlag180Roll) |
{ |
Mess_IntegralRoll = (Umschlag180Roll - 10000L); |
Mess_IntegralRoll2 = Mess_IntegralRoll; |
} |
if(AdWertRoll < 15) MesswertRoll = -1000; |
if(AdWertRoll < 7) MesswertRoll = -2000; |
if(PlatinenVersion == 10) |
{ |
if(AdWertRoll > 1010) MesswertRoll = +1000; |
if(AdWertRoll > 1017) MesswertRoll = +2000; |
} |
else |
{ |
if(AdWertRoll > 2020) MesswertRoll = +1000; |
if(AdWertRoll > 2034) MesswertRoll = +2000; |
} |
// Nick ++++++++++++++++++++++++++++++++++++++++++++++++ |
MesswertNick -= tmpl2; |
MesswertNick -= (tmpl*Parameter_AchsGegenKopplung1)/512L; |
Mess_IntegralNick2 += MesswertNick; |
Mess_IntegralNick += MesswertNick - LageKorrekturNick; |
if(Mess_IntegralNick > Umschlag180Nick) |
{ |
Mess_IntegralNick = -(Umschlag180Nick - 10000L); |
Mess_IntegralNick2 = Mess_IntegralNick; |
} |
if(Mess_IntegralNick <-Umschlag180Nick) |
{ |
Mess_IntegralNick = (Umschlag180Nick - 10000L); |
Mess_IntegralNick2 = Mess_IntegralNick; |
} |
if(AdWertNick < 15) MesswertNick = -1000; |
if(AdWertNick < 7) MesswertNick = -2000; |
if(PlatinenVersion == 10) |
{ |
if(AdWertNick > 1010) MesswertNick = +1000; |
if(AdWertNick > 1017) MesswertNick = +2000; |
} |
else |
{ |
if(AdWertNick > 2020) MesswertNick = +1000; |
if(AdWertNick > 2034) MesswertNick = +2000; |
} |
//++++++++++++++++++++++++++++++++++++++++++++++++ |
// ADC einschalten |
ANALOG_ON; |
//++++++++++++++++++++++++++++++++++++++++++++++++ |
Integral_Gier = Mess_Integral_Gier; |
IntegralNick = Mess_IntegralNick; |
IntegralRoll = Mess_IntegralRoll; |
IntegralNick2 = Mess_IntegralNick2; |
IntegralRoll2 = Mess_IntegralRoll2; |
if(EE_Parameter.GlobalConfig & CFG_DREHRATEN_BEGRENZER && !Looping_Nick && !Looping_Roll) |
{ |
if(MesswertNick > 200) MesswertNick += 4 * (MesswertNick - 200); |
else if(MesswertNick < -200) MesswertNick += 4 * (MesswertNick + 200); |
if(MesswertRoll > 200) MesswertRoll += 4 * (MesswertRoll - 200); |
else if(MesswertRoll < -200) MesswertRoll += 4 * (MesswertRoll + 200); |
} |
if(Poti1 < PPM_in[EE_Parameter.Kanalbelegung[K_POTI1]] + 110) Poti1++; else if(Poti1 > PPM_in[EE_Parameter.Kanalbelegung[K_POTI1]] + 110 && Poti1) Poti1--; |
if(Poti2 < PPM_in[EE_Parameter.Kanalbelegung[K_POTI2]] + 110) Poti2++; else if(Poti2 > PPM_in[EE_Parameter.Kanalbelegung[K_POTI2]] + 110 && Poti2) Poti2--; |
if(Poti3 < PPM_in[EE_Parameter.Kanalbelegung[K_POTI3]] + 110) Poti3++; else if(Poti3 > PPM_in[EE_Parameter.Kanalbelegung[K_POTI3]] + 110 && Poti3) Poti3--; |
if(Poti4 < PPM_in[EE_Parameter.Kanalbelegung[K_POTI4]] + 110) Poti4++; else if(Poti4 > PPM_in[EE_Parameter.Kanalbelegung[K_POTI4]] + 110 && Poti4) Poti4--; |
if(Poti1 < 0) Poti1 = 0; else if(Poti1 > 255) Poti1 = 255; |
if(Poti2 < 0) Poti2 = 0; else if(Poti2 > 255) Poti2 = 255; |
if(Poti3 < 0) Poti3 = 0; else if(Poti3 > 255) Poti3 = 255; |
if(Poti4 < 0) Poti4 = 0; else if(Poti4 > 255) Poti4 = 255; |
} |
//############################################################################ |
// Messwerte beim Ermitteln der Nullage |
void CalibrierMittelwert(void) |
//############################################################################ |
{ |
// ADC auschalten, damit die Werte sich nicht während der Berechnung ändern |
ANALOG_OFF; |
MesswertNick = AdWertNick; |
MesswertRoll = AdWertRoll; |
MesswertGier = AdWertGier; |
Mittelwert_AccNick = ACC_AMPLIFY * (long)AdWertAccNick; |
Mittelwert_AccRoll = ACC_AMPLIFY * (long)AdWertAccRoll; |
Mittelwert_AccHoch = (long)AdWertAccHoch; |
// ADC einschalten |
ANALOG_ON; |
if(Poti1 < PPM_in[EE_Parameter.Kanalbelegung[K_POTI1]] + 110) Poti1++; else if(Poti1 > PPM_in[EE_Parameter.Kanalbelegung[K_POTI1]] + 110 && Poti1) Poti1--; |
if(Poti2 < PPM_in[EE_Parameter.Kanalbelegung[K_POTI2]] + 110) Poti2++; else if(Poti2 > PPM_in[EE_Parameter.Kanalbelegung[K_POTI2]] + 110 && Poti2) Poti2--; |
if(Poti3 < PPM_in[EE_Parameter.Kanalbelegung[K_POTI3]] + 110) Poti3++; else if(Poti3 > PPM_in[EE_Parameter.Kanalbelegung[K_POTI3]] + 110 && Poti3) Poti3--; |
if(Poti4 < PPM_in[EE_Parameter.Kanalbelegung[K_POTI4]] + 110) Poti4++; else if(Poti4 > PPM_in[EE_Parameter.Kanalbelegung[K_POTI4]] + 110 && Poti4) Poti4--; |
if(Poti1 < 0) Poti1 = 0; else if(Poti1 > 255) Poti1 = 255; |
if(Poti2 < 0) Poti2 = 0; else if(Poti2 > 255) Poti2 = 255; |
if(Poti3 < 0) Poti3 = 0; else if(Poti3 > 255) Poti3 = 255; |
if(Poti4 < 0) Poti4 = 0; else if(Poti4 > 255) Poti4 = 255; |
Umschlag180Nick = (long) EE_Parameter.WinkelUmschlagNick * 2500L; |
Umschlag180Roll = (long) EE_Parameter.WinkelUmschlagNick * 2500L; |
} |
//############################################################################ |
// Senden der Motorwerte per I2C-Bus |
void SendMotorData(void) |
//############################################################################ |
{ |
if(MOTOR_OFF || !MotorenEin) |
{ |
Motor_Hinten = 0; |
Motor_Vorne = 0; |
Motor_Rechts = 0; |
Motor_Links = 0; |
if(MotorTest[0]) Motor_Vorne = MotorTest[0]; |
if(MotorTest[1]) Motor_Hinten = MotorTest[1]; |
if(MotorTest[2]) Motor_Links = MotorTest[2]; |
if(MotorTest[3]) Motor_Rechts = MotorTest[3]; |
} |
DebugOut.Analog[12] = Motor_Vorne; |
DebugOut.Analog[13] = Motor_Hinten; |
DebugOut.Analog[14] = Motor_Links; |
DebugOut.Analog[15] = Motor_Rechts; |
//Start I2C Interrupt Mode |
twi_state = 0; |
motor = 0; |
i2c_start(); |
} |
//############################################################################ |
// Trägt ggf. das Poti als Parameter ein |
void ParameterZuordnung(void) |
//############################################################################ |
{ |
#define CHK_POTI(b,a,min,max) { if(a > 250) { if(a == 251) b = Poti1; else if(a == 252) b = Poti2; else if(a == 253) b = Poti3; else if(a == 254) b = Poti4;} else b = a; if(b <= min) b = min; else if(b >= max) b = max;} |
CHK_POTI(Parameter_MaxHoehe,EE_Parameter.MaxHoehe,0,255); |
CHK_POTI(Parameter_Luftdruck_D,EE_Parameter.Luftdruck_D,0,100); |
CHK_POTI(Parameter_Hoehe_P,EE_Parameter.Hoehe_P,0,100); |
CHK_POTI(Parameter_Hoehe_ACC_Wirkung,EE_Parameter.Hoehe_ACC_Wirkung,0,255); |
CHK_POTI(Parameter_KompassWirkung,EE_Parameter.KompassWirkung,0,255); |
CHK_POTI(Parameter_Gyro_P,EE_Parameter.Gyro_P,10,255); |
CHK_POTI(Parameter_Gyro_I,EE_Parameter.Gyro_I,0,255); |
CHK_POTI(Parameter_I_Faktor,EE_Parameter.I_Faktor,0,255); |
CHK_POTI(Parameter_UserParam1,EE_Parameter.UserParam1,0,255); |
CHK_POTI(Parameter_UserParam2,EE_Parameter.UserParam2,0,255); |
CHK_POTI(Parameter_UserParam3,EE_Parameter.UserParam3,0,255); |
CHK_POTI(Parameter_UserParam4,EE_Parameter.UserParam4,0,255); |
CHK_POTI(Parameter_UserParam5,EE_Parameter.UserParam5,0,255); |
CHK_POTI(Parameter_UserParam6,EE_Parameter.UserParam6,0,255); |
CHK_POTI(Parameter_UserParam7,EE_Parameter.UserParam7,0,255); |
CHK_POTI(Parameter_UserParam8,EE_Parameter.UserParam8,0,255); |
CHK_POTI(Parameter_ServoNickControl,EE_Parameter.ServoNickControl,0,255); |
CHK_POTI(Parameter_LoopGasLimit,EE_Parameter.LoopGasLimit,0,255); |
CHK_POTI(Parameter_AchsKopplung1, EE_Parameter.AchsKopplung1,0,255); |
CHK_POTI(Parameter_AchsGegenKopplung1,EE_Parameter.AchsGegenKopplung1,0,255); |
CHK_POTI(Parameter_DynamicStability,EE_Parameter.DynamicStability,0,255); |
Ki = (float) Parameter_I_Faktor * 0.0001; |
MAX_GAS = EE_Parameter.Gas_Max; |
MIN_GAS = EE_Parameter.Gas_Min; |
} |
//############################################################################ |
// |
void MotorRegler(void) |
//############################################################################ |
{ |
int motorwert,pd_ergebnis,h,tmp_int; |
int GierMischanteil,GasMischanteil; |
static long SummeNick=0,SummeRoll=0; |
static long sollGier = 0,tmp_long,tmp_long2; |
static long IntegralFehlerNick = 0; |
static long IntegralFehlerRoll = 0; |
static unsigned int RcLostTimer; |
static unsigned char delay_neutral = 0; |
static unsigned char delay_einschalten = 0,delay_ausschalten = 0; |
static unsigned int modell_fliegt = 0; |
static int hoehenregler = 0; |
static char TimerWerteausgabe = 0; |
static char NeueKompassRichtungMerken = 0; |
static long ausgleichNick, ausgleichRoll; |
Mittelwert(); |
GRN_ON; |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Gaswert ermitteln |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
GasMischanteil = PPM_in[EE_Parameter.Kanalbelegung[K_GAS]] + 120; |
if(GasMischanteil > MAX_GAS - 20) GasMischanteil = MAX_GAS - 20; |
if(GasMischanteil < 0) GasMischanteil = 0; |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Emfang schlecht |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
if(SenderOkay < 100) |
{ |
if(!PcZugriff) |
{ |
if(BeepMuster == 0xffff) |
{ |
beeptime = 15000; |
BeepMuster = 0x0c00; |
} |
} |
if(RcLostTimer) RcLostTimer--; |
else |
{ |
MotorenEin = 0; |
Notlandung = 0; |
} |
ROT_ON; |
if(modell_fliegt > 2000) // wahrscheinlich in der Luft --> langsam absenken |
{ |
GasMischanteil = EE_Parameter.NotGas; |
Notlandung = 1; |
PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] = 0; |
PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] = 0; |
PPM_in[EE_Parameter.Kanalbelegung[K_GIER]] = 0; |
} |
else MotorenEin = 0; |
} |
else |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Emfang gut |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
if(SenderOkay > 140) |
{ |
Notlandung = 0; |
RcLostTimer = EE_Parameter.NotGasZeit * 50; |
if(GasMischanteil > 40) |
{ |
if(modell_fliegt < 0xffff) modell_fliegt++; |
} |
if((modell_fliegt < 200) || (GasMischanteil < 40)) |
{ |
SummeNick = 0; |
SummeRoll = 0; |
Mess_Integral_Gier = 0; |
Mess_Integral_Gier2 = 0; |
} |
if((GasMischanteil > 200) && MotorenEin == 0) |
{ |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// auf Nullwerte kalibrieren |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
if(PPM_in[EE_Parameter.Kanalbelegung[K_GIER]] > 75) // Neutralwerte |
{ |
if(++delay_neutral > 200) // nicht sofort |
{ |
GRN_OFF; |
MotorenEin = 0; |
delay_neutral = 0; |
modell_fliegt = 0; |
if(PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] > 70 || abs(PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]]) > 70) |
{ |
unsigned char setting=1; |
if(PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] > 70 && PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] < 70) setting = 1; |
if(PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] > 70 && PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] > 70) setting = 2; |
if(PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] < 70 && PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] > 70) setting = 3; |
if(PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] <-70 && PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] > 70) setting = 4; |
if(PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] <-70 && PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] < 70) setting = 5; |
eeprom_write_byte(&EEPromArray[EEPROM_ADR_ACTIVE_SET], setting); // aktiven Datensatz merken |
} |
if((EE_Parameter.GlobalConfig & CFG_HOEHENREGELUNG)) // Höhenregelung aktiviert? |
{ |
if((MessLuftdruck > 950) || (MessLuftdruck < 750)) SucheLuftruckOffset(); |
} |
ReadParameterSet(GetActiveParamSetNumber(), (unsigned char *) &EE_Parameter.Kanalbelegung[0], sizeof(struct mk_param_struct)); |
SetNeutral(); |
Piep(GetActiveParamSetNumber()); |
} |
} |
else |
if(PPM_in[EE_Parameter.Kanalbelegung[K_GIER]] < -75) // ACC Neutralwerte speichern |
{ |
if(++delay_neutral > 200) // nicht sofort |
{ |
GRN_OFF; |
eeprom_write_byte(&EEPromArray[EEPROM_ADR_ACC_NICK],0xff); // Werte löschen |
MotorenEin = 0; |
delay_neutral = 0; |
modell_fliegt = 0; |
SetNeutral(); |
eeprom_write_byte(&EEPromArray[EEPROM_ADR_ACC_NICK],NeutralAccX / 256); // ACC-NeutralWerte speichern |
eeprom_write_byte(&EEPromArray[EEPROM_ADR_ACC_NICK+1],NeutralAccX % 256); // ACC-NeutralWerte speichern |
eeprom_write_byte(&EEPromArray[EEPROM_ADR_ACC_ROLL],NeutralAccY / 256); |
eeprom_write_byte(&EEPromArray[EEPROM_ADR_ACC_ROLL+1],NeutralAccY % 256); |
eeprom_write_byte(&EEPromArray[EEPROM_ADR_ACC_Z],(int)NeutralAccZ / 256); |
eeprom_write_byte(&EEPromArray[EEPROM_ADR_ACC_Z+1],(int)NeutralAccZ % 256); |
Piep(GetActiveParamSetNumber()); |
} |
} |
else delay_neutral = 0; |
} |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Gas ist unten |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
if(GasMischanteil < 35) |
{ |
// Starten |
if(PPM_in[EE_Parameter.Kanalbelegung[K_GIER]] < -75) |
{ |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Einschalten |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
if(++delay_einschalten > 200) |
{ |
delay_einschalten = 200; |
modell_fliegt = 1; |
MotorenEin = 1; |
sollGier = 0; |
Mess_Integral_Gier = 0; |
Mess_Integral_Gier2 = 0; |
Mess_IntegralNick = 0; |
Mess_IntegralRoll = 0; |
Mess_IntegralNick2 = IntegralNick; |
Mess_IntegralRoll2 = IntegralRoll; |
SummeNick = 0; |
SummeRoll = 0; |
} |
} |
else delay_einschalten = 0; |
//Auf Neutralwerte setzen |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Auschalten |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
if(PPM_in[EE_Parameter.Kanalbelegung[K_GIER]] > 75) |
{ |
if(++delay_ausschalten > 200) // nicht sofort |
{ |
MotorenEin = 0; |
delay_ausschalten = 200; |
modell_fliegt = 0; |
} |
} |
else delay_ausschalten = 0; |
} |
} |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// neue Werte von der Funke |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
if(!NewPpmData-- || Notlandung) |
{ |
int tmp_int; |
ParameterZuordnung(); |
StickNick = PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] * EE_Parameter.Stick_P; |
StickNick += PPM_diff[EE_Parameter.Kanalbelegung[K_NICK]] * EE_Parameter.Stick_D; |
StickRoll = PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] * EE_Parameter.Stick_P; |
StickRoll += PPM_diff[EE_Parameter.Kanalbelegung[K_ROLL]] * EE_Parameter.Stick_D; |
StickGier = -PPM_in[EE_Parameter.Kanalbelegung[K_GIER]]; |
GyroFaktor = ((float)Parameter_Gyro_P + 10.0) / 256.0; |
IntegralFaktor = ((float) Parameter_Gyro_I) / 44000; |
#define KEY_VALUE (Parameter_UserParam1 * 4) //(Poti3 * 8) |
if(DubWiseKeys[1]) beeptime = 10; |
if(DubWiseKeys[1] & DUB_KEY_UP) tmp_int = KEY_VALUE; else |
if(DubWiseKeys[1] & DUB_KEY_DOWN) tmp_int = -KEY_VALUE; else tmp_int = 0; |
ExternStickNick = (ExternStickNick * 7 + tmp_int) / 8; |
if(DubWiseKeys[1] & DUB_KEY_LEFT) tmp_int = KEY_VALUE; else |
if(DubWiseKeys[1] & DUB_KEY_RIGHT) tmp_int = -KEY_VALUE; else tmp_int = 0; |
ExternStickRoll = (ExternStickRoll * 7 + tmp_int) / 8; |
if(DubWiseKeys[0] & 8) ExternStickGier = 50;else |
if(DubWiseKeys[0] & 4) ExternStickGier =-50;else ExternStickGier = 0; |
if(DubWiseKeys[0] & 2) ExternHoehenValue++; |
if(DubWiseKeys[0] & 16) ExternHoehenValue--; |
StickNick += ExternStickNick / 8; |
StickRoll += ExternStickRoll / 8; |
StickGier += ExternStickGier; |
if(EE_Parameter.GlobalConfig & CFG_HEADING_HOLD) IntegralFaktor = 0; |
if(GyroFaktor < 0) GyroFaktor = 0; |
if(IntegralFaktor < 0) IntegralFaktor = 0; |
// greift in den Stick ein, um ungewolltes überschlagen zu verhindern |
if(!(EE_Parameter.LoopConfig & CFG_LOOP_LINKS) && !(EE_Parameter.LoopConfig & CFG_LOOP_RECHTS)) |
{ |
if(IntegralNick > 60000) |
{ |
StickNick -= 8 * EE_Parameter.Stick_P; |
if(IntegralNick > 80000) StickNick -= 16 * EE_Parameter.Stick_P; |
} |
else |
if(IntegralNick < -60000) |
{ |
StickNick += 8 * EE_Parameter.Stick_P; |
if(IntegralNick > 80000) StickNick -= 16 * EE_Parameter.Stick_P; |
} |
if(IntegralRoll > 60000) |
{ |
StickRoll -= 8 * EE_Parameter.Stick_P; |
if(IntegralRoll > 80000) StickRoll -= 16 * EE_Parameter.Stick_P; |
} |
else |
if(IntegralRoll < -60000) |
{ |
StickRoll += 8 * EE_Parameter.Stick_P; |
if(IntegralRoll > 80000) StickRoll -= 16 * EE_Parameter.Stick_P; |
} |
} |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Looping? |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
if((PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] > EE_Parameter.LoopThreshold) && EE_Parameter.LoopConfig & CFG_LOOP_LINKS) Looping_Links = 1; |
else |
{ |
{ |
if((PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] < (EE_Parameter.LoopThreshold - EE_Parameter.LoopHysterese))) Looping_Links = 0; |
} |
} |
if((PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] < -EE_Parameter.LoopThreshold) && EE_Parameter.LoopConfig & CFG_LOOP_RECHTS) Looping_Rechts = 1; |
else |
{ |
if(Looping_Rechts) // Hysterese |
{ |
if(PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] > -(EE_Parameter.LoopThreshold - EE_Parameter.LoopHysterese)) Looping_Rechts = 0; |
} |
} |
if((PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] > EE_Parameter.LoopThreshold) && EE_Parameter.LoopConfig & CFG_LOOP_OBEN) Looping_Oben = 1; |
else |
{ |
if(Looping_Oben) // Hysterese |
{ |
if((PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] < (EE_Parameter.LoopThreshold - EE_Parameter.LoopHysterese))) Looping_Oben = 0; |
} |
} |
if((PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] < -EE_Parameter.LoopThreshold) && EE_Parameter.LoopConfig & CFG_LOOP_UNTEN) Looping_Unten = 1; |
else |
{ |
if(Looping_Unten) // Hysterese |
{ |
if(PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] > -(EE_Parameter.LoopThreshold - EE_Parameter.LoopHysterese)) Looping_Unten = 0; |
} |
} |
if(Looping_Links || Looping_Rechts) Looping_Roll = 1; else Looping_Roll = 0; |
if(Looping_Oben || Looping_Unten) {Looping_Nick = 1; Looping_Roll = 0; Looping_Links = 0; Looping_Rechts = 0;} else Looping_Nick = 0; |
} // Ende neue Funken-Werte |
if(Looping_Roll) beeptime = 100; |
if(Looping_Roll || Looping_Nick) |
{ |
if(GasMischanteil > EE_Parameter.LoopGasLimit) GasMischanteil = EE_Parameter.LoopGasLimit; |
} |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Bei Empfangsausfall im Flug |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
if(Notlandung) |
{ |
StickGier = 0; |
StickNick = 0; |
StickRoll = 0; |
GyroFaktor = 0.1; |
IntegralFaktor = 0.005; |
Looping_Roll = 0; |
Looping_Nick = 0; |
} |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Integrale auf ACC-Signal abgleichen |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
#define ABGLEICH_ANZAHL 256L |
MittelIntegralNick += IntegralNick; // Für die Mittelwertbildung aufsummieren |
MittelIntegralRoll += IntegralRoll; |
MittelIntegralNick2 += IntegralNick2; |
MittelIntegralRoll2 += IntegralRoll2; |
if(Looping_Nick || Looping_Roll) |
{ |
IntegralAccNick = 0; |
IntegralAccRoll = 0; |
MittelIntegralNick = 0; |
MittelIntegralRoll = 0; |
MittelIntegralNick2 = 0; |
MittelIntegralRoll2 = 0; |
Mess_IntegralNick2 = Mess_IntegralNick; |
Mess_IntegralRoll2 = Mess_IntegralRoll; |
ZaehlMessungen = 0; |
LageKorrekturNick = 0; |
LageKorrekturRoll = 0; |
} |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
if(!Looping_Nick && !Looping_Roll) |
{ |
long tmp_long, tmp_long2; |
tmp_long = (long)(IntegralNick / EE_Parameter.GyroAccFaktor - (long)Mittelwert_AccNick); |
tmp_long /= 16; |
tmp_long2 = (long)(IntegralRoll / EE_Parameter.GyroAccFaktor - (long)Mittelwert_AccRoll); |
tmp_long2 /= 16; |
#define AUSGLEICH 32 //(Parameter_UserParam1 / 2) |
if(tmp_long > AUSGLEICH) tmp_long = AUSGLEICH; |
if(tmp_long < -AUSGLEICH) tmp_long =-AUSGLEICH; |
if(tmp_long2 > AUSGLEICH) tmp_long2 = AUSGLEICH; |
if(tmp_long2 <-AUSGLEICH) tmp_long2 =-AUSGLEICH; |
Mess_IntegralNick -= tmp_long; |
Mess_IntegralRoll -= tmp_long2; |
} |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
if(ZaehlMessungen >= ABGLEICH_ANZAHL) |
{ |
static int cnt = 0; |
static char last_n_p,last_n_n,last_r_p,last_r_n; |
static long MittelIntegralNick_Alt,MittelIntegralRoll_Alt; |
if(!Looping_Nick && !Looping_Roll) |
{ |
MittelIntegralNick /= ABGLEICH_ANZAHL; |
MittelIntegralRoll /= ABGLEICH_ANZAHL; |
IntegralAccNick = (EE_Parameter.GyroAccFaktor * IntegralAccNick) / ABGLEICH_ANZAHL; |
IntegralAccRoll = (EE_Parameter.GyroAccFaktor * IntegralAccRoll) / ABGLEICH_ANZAHL; |
IntegralAccZ = IntegralAccZ / ABGLEICH_ANZAHL; |
#define MAX_I 0//(Poti2/10) |
// Nick ++++++++++++++++++++++++++++++++++++++++++++++++ |
IntegralFehlerNick = (long)(MittelIntegralNick - (long)IntegralAccNick); |
ausgleichNick = IntegralFehlerNick / EE_Parameter.GyroAccAbgleich; |
LageKorrekturNick = ausgleichNick / ABGLEICH_ANZAHL; |
// Roll ++++++++++++++++++++++++++++++++++++++++++++++++ |
IntegralFehlerRoll = (long)(MittelIntegralRoll - (long)IntegralAccRoll); |
ausgleichRoll = IntegralFehlerRoll / EE_Parameter.GyroAccAbgleich; |
LageKorrekturRoll = ausgleichRoll / ABGLEICH_ANZAHL; |
// Mess_IntegralNick -= ausgleichNick; |
// Mess_IntegralRoll -= ausgleichRoll; |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Gyro-Drift ermitteln |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
MittelIntegralNick2 /= ABGLEICH_ANZAHL; |
MittelIntegralRoll2 /= ABGLEICH_ANZAHL; |
// tmp_long = (long)(MittelIntegralNick2 - (long)IntegralAccNick); |
// tmp_long2 = (long)(MittelIntegralRoll2 - (long)IntegralAccRoll); |
tmp_long = IntegralNick2 - IntegralNick; |
tmp_long2 = IntegralRoll2 - IntegralRoll; |
//DebugOut.Analog[25] = MittelIntegralRoll2 / 26; |
IntegralFehlerNick = tmp_long; |
IntegralFehlerRoll = tmp_long2; |
Mess_IntegralNick2 -= IntegralFehlerNick; |
Mess_IntegralRoll2 -= IntegralFehlerRoll; |
// IntegralFehlerNick = (IntegralFehlerNick * 1 + tmp_long) / 2; |
// IntegralFehlerRoll = (IntegralFehlerRoll * 1 + tmp_long2) / 2; |
DebugOut.Analog[17] = IntegralAccNick / 26; |
DebugOut.Analog[18] = IntegralAccRoll / 26; |
DebugOut.Analog[19] = IntegralFehlerNick;// / 26; |
DebugOut.Analog[20] = IntegralFehlerRoll;// / 26; |
DebugOut.Analog[21] = MittelIntegralNick / 26; |
DebugOut.Analog[22] = MittelIntegralRoll / 26; |
//DebugOut.Analog[28] = ausgleichNick; |
DebugOut.Analog[29] = ausgleichRoll; |
DebugOut.Analog[30] = LageKorrekturRoll * 10; |
#define FEHLER_LIMIT (ABGLEICH_ANZAHL * 4) |
#define FEHLER_LIMIT2 (ABGLEICH_ANZAHL * 16) |
#define BEWEGUNGS_LIMIT 20000 |
// Nick +++++++++++++++++++++++++++++++++++++++++++++++++ |
cnt = 1;// + labs(IntegralFehlerNick) / 4096; |
if(labs(MittelIntegralNick_Alt - MittelIntegralNick) < BEWEGUNGS_LIMIT) |
{ |
if(IntegralFehlerNick > FEHLER_LIMIT2) |
{ |
if(last_n_p) |
{ |
cnt += labs(IntegralFehlerNick) / FEHLER_LIMIT2; |
ausgleichNick = IntegralFehlerNick / 8; |
if(ausgleichNick > 5000) ausgleichNick = 5000; |
LageKorrekturNick += ausgleichNick / ABGLEICH_ANZAHL; |
} |
else last_n_p = 1; |
} else last_n_p = 0; |
if(IntegralFehlerNick < -FEHLER_LIMIT2) |
{ |
if(last_n_n) |
{ |
cnt += labs(IntegralFehlerNick) / FEHLER_LIMIT2; |
ausgleichNick = IntegralFehlerNick / 8; |
if(ausgleichNick < -5000) ausgleichNick = -5000; |
LageKorrekturNick += ausgleichNick / ABGLEICH_ANZAHL; |
} |
else last_n_n = 1; |
} else last_n_n = 0; |
} else cnt = 0; |
if(cnt > EE_Parameter.Driftkomp) cnt = EE_Parameter.Driftkomp; |
if(IntegralFehlerNick > FEHLER_LIMIT) AdNeutralNick += cnt; |
if(IntegralFehlerNick < -FEHLER_LIMIT) AdNeutralNick -= cnt; |
// Roll +++++++++++++++++++++++++++++++++++++++++++++++++ |
cnt = 1;// + labs(IntegralFehlerNick) / 4096; |
ausgleichRoll = 0; |
if(labs(MittelIntegralRoll_Alt - MittelIntegralRoll) < BEWEGUNGS_LIMIT) |
{ |
if(IntegralFehlerRoll > FEHLER_LIMIT2) |
{ |
if(last_r_p) |
{ |
cnt += labs(IntegralFehlerRoll) / FEHLER_LIMIT2; |
ausgleichRoll = IntegralFehlerRoll / 8; |
if(ausgleichRoll > 5000) ausgleichRoll = 5000; |
LageKorrekturRoll += ausgleichRoll / ABGLEICH_ANZAHL; |
} |
else last_r_p = 1; |
} else last_r_p = 0; |
if(IntegralFehlerRoll < -FEHLER_LIMIT2) |
{ |
if(last_r_n) |
{ |
cnt += labs(IntegralFehlerRoll) / FEHLER_LIMIT2; |
ausgleichRoll = IntegralFehlerRoll / 8; |
if(ausgleichRoll < -5000) ausgleichRoll = -5000; |
LageKorrekturRoll += ausgleichRoll / ABGLEICH_ANZAHL; |
} |
else last_r_n = 1; |
} else last_r_n = 0; |
} else |
{ |
cnt = 0; |
} |
DebugOut.Analog[27] = ausgleichRoll; |
if(cnt > EE_Parameter.Driftkomp) cnt = EE_Parameter.Driftkomp; |
//if(cnt > 1) beeptime = 50; |
if(IntegralFehlerRoll > FEHLER_LIMIT) AdNeutralRoll += cnt; |
if(IntegralFehlerRoll < -FEHLER_LIMIT) AdNeutralRoll -= cnt; |
DebugOut.Analog[23] = AdNeutralNick;//10*(AdNeutralNick - StartNeutralNick); |
DebugOut.Analog[24] = 10*(AdNeutralRoll - StartNeutralRoll); |
} |
else |
{ |
LageKorrekturRoll = 0; |
LageKorrekturNick = 0; |
} |
if(!IntegralFaktor) { LageKorrekturRoll = 0; LageKorrekturNick = 0;} // z.B. bei HH |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++ |
MittelIntegralNick_Alt = MittelIntegralNick; |
MittelIntegralRoll_Alt = MittelIntegralRoll; |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++ |
IntegralAccNick = 0; |
IntegralAccRoll = 0; |
IntegralAccZ = 0; |
MittelIntegralNick = 0; |
MittelIntegralRoll = 0; |
MittelIntegralNick2 = 0; |
MittelIntegralRoll2 = 0; |
ZaehlMessungen = 0; |
} |
//DebugOut.Analog[31] = StickRoll / (26*IntegralFaktor); |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Gieren |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
if(abs(StickGier) > 20) // war 35 |
{ |
if(!(EE_Parameter.GlobalConfig & CFG_KOMPASS_FIX)) NeueKompassRichtungMerken = 1; |
} |
tmp_int = (long) EE_Parameter.Gier_P * ((long)StickGier * abs(StickGier)) / 512L; // expo y = ax + bx² |
tmp_int += (EE_Parameter.Gier_P * StickGier) / 4; |
sollGier = tmp_int; |
Mess_Integral_Gier -= tmp_int; |
if(Mess_Integral_Gier > 50000) Mess_Integral_Gier = 50000; // begrenzen |
if(Mess_Integral_Gier <-50000) Mess_Integral_Gier =-50000; |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Kompass |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
if(EE_Parameter.GlobalConfig & CFG_KOMPASS_AKTIV) |
{ |
int w,v; |
if (!updKompass--) // Aufruf mit ~10 Hz |
{ |
KompassValue = heading_MM3(); |
KompassRichtung = ((540 + KompassValue - KompassStartwert) % 360) - 180; |
updKompass = 50; |
} |
w = abs(IntegralNick /512); // mit zunehmender Neigung den Einfluss drosseln |
v = abs(IntegralRoll /512); |
if(v > w) w = v; // grösste Neigung ermitteln |
if(w < 35 && NeueKompassRichtungMerken) |
{ |
KompassStartwert = KompassValue; |
NeueKompassRichtungMerken = 0; |
} |
w = (w * Parameter_KompassWirkung) / 64; // auf die Wirkung normieren |
w = Parameter_KompassWirkung - w; // Wirkung ggf drosseln |
if(w > 0) |
{ |
Mess_Integral_Gier += (KompassRichtung * w) / 32; // nach Kompass ausrichten |
} |
else beeptime = 100; |
} |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Debugwerte zuordnen |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
if(!TimerWerteausgabe--) |
{ |
TimerWerteausgabe = 24; |
DebugOut.Analog[0] = IntegralNick / EE_Parameter.GyroAccFaktor; |
DebugOut.Analog[1] = IntegralRoll / EE_Parameter.GyroAccFaktor; |
DebugOut.Analog[2] = Mittelwert_AccNick; |
DebugOut.Analog[3] = Mittelwert_AccRoll; |
DebugOut.Analog[4] = MesswertGier; |
DebugOut.Analog[5] = HoehenWert; |
DebugOut.Analog[6] =(Mess_Integral_Hoch / 512); |
DebugOut.Analog[8] = KompassValue; |
DebugOut.Analog[9] = UBat; |
DebugOut.Analog[10] = SenderOkay; |
DebugOut.Analog[16] = Mittelwert_AccHoch; |
/* DebugOut.Analog[16] = motor_rx[0]; |
DebugOut.Analog[17] = motor_rx[1]; |
DebugOut.Analog[18] = motor_rx[2]; |
DebugOut.Analog[19] = motor_rx[3]; |
DebugOut.Analog[20] = motor_rx[0] + motor_rx[1] + motor_rx[2] + motor_rx[3]; |
DebugOut.Analog[20] /= 14; |
DebugOut.Analog[21] = motor_rx[4]; |
DebugOut.Analog[22] = motor_rx[5]; |
DebugOut.Analog[23] = motor_rx[6]; |
DebugOut.Analog[24] = motor_rx[7]; |
DebugOut.Analog[25] = motor_rx[4] + motor_rx[5] + motor_rx[6] + motor_rx[7]; |
*/ |
// DebugOut.Analog[9] = MesswertNick; |
// DebugOut.Analog[9] = SollHoehe; |
// DebugOut.Analog[10] = Mess_Integral_Gier / 128; |
// DebugOut.Analog[11] = KompassStartwert; |
// DebugOut.Analog[10] = Parameter_Gyro_I; |
// DebugOut.Analog[10] = EE_Parameter.Gyro_I; |
// DebugOut.Analog[9] = KompassRichtung; |
// DebugOut.Analog[10] = GasMischanteil; |
// DebugOut.Analog[3] = HoeheD * 32; |
// DebugOut.Analog[4] = hoehenregler; |
} |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Drehgeschwindigkeit und -winkel zu einem Istwert zusammenfassen |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
if(Looping_Nick) MesswertNick = MesswertNick * GyroFaktor; |
else MesswertNick = IntegralNick * IntegralFaktor + MesswertNick * GyroFaktor; |
if(Looping_Roll) MesswertRoll = MesswertRoll * GyroFaktor; |
else MesswertRoll = IntegralRoll * IntegralFaktor + MesswertRoll * GyroFaktor; |
// MesswertGier = MesswertGier * (GyroFaktor/2) + Integral_Gier * IntegralFaktor; |
MesswertGier = MesswertGier * (GyroFaktor) + Integral_Gier * IntegralFaktor/2; |
DebugOut.Analog[28] = MesswertRoll; |
DebugOut.Analog[25] = IntegralRoll * IntegralFaktor; |
DebugOut.Analog[31] = StickRoll;// / (26*IntegralFaktor); |
// Maximalwerte abfangen |
#define MAX_SENSOR 2048 |
if(MesswertNick > MAX_SENSOR) MesswertNick = MAX_SENSOR; |
if(MesswertNick < -MAX_SENSOR) MesswertNick = -MAX_SENSOR; |
if(MesswertRoll > MAX_SENSOR) MesswertRoll = MAX_SENSOR; |
if(MesswertRoll < -MAX_SENSOR) MesswertRoll = -MAX_SENSOR; |
if(MesswertGier > MAX_SENSOR) MesswertGier = MAX_SENSOR; |
if(MesswertGier < -MAX_SENSOR) MesswertGier = -MAX_SENSOR; |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Höhenregelung |
// Die Höhenregelung schwächt lediglich das Gas ab, erhöht es allerdings nicht |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
//OCR0B = 180 - (Poti1 + 120) / 4; |
//DruckOffsetSetting = OCR0B; |
if((EE_Parameter.GlobalConfig & CFG_HOEHENREGELUNG)) // Höhenregelung |
{ |
int tmp_int; |
if(EE_Parameter.GlobalConfig & CFG_HOEHEN_SCHALTER) // Regler wird über Schalter gesteuert |
{ |
if(Parameter_MaxHoehe < 50) |
{ |
SollHoehe = HoehenWert - 20; // Parameter_MaxHoehe ist der PPM-Wert des Schalters |
HoehenReglerAktiv = 0; |
} |
else |
HoehenReglerAktiv = 1; |
} |
else |
{ |
SollHoehe = ((int) ExternHoehenValue + (int) Parameter_MaxHoehe) * (int)EE_Parameter.Hoehe_Verstaerkung - 20; |
HoehenReglerAktiv = 1; |
} |
if(Notlandung) SollHoehe = 0; |
h = HoehenWert; |
if((h > SollHoehe) && HoehenReglerAktiv) // zu hoch --> drosseln |
{ h = ((h - SollHoehe) * (int) Parameter_Hoehe_P) / 16; // Differenz bestimmen --> P-Anteil |
h = GasMischanteil - h; // vom Gas abziehen |
h -= (HoeheD * Parameter_Luftdruck_D)/8; // D-Anteil |
tmp_int = ((Mess_Integral_Hoch / 512) * (signed long) Parameter_Hoehe_ACC_Wirkung) / 32; |
if(tmp_int > 50) tmp_int = 50; |
else if(tmp_int < -50) tmp_int = -50; |
h -= tmp_int; |
hoehenregler = (hoehenregler*15 + h) / 16; |
if(hoehenregler < EE_Parameter.Hoehe_MinGas) // nicht unter MIN |
{ |
if(GasMischanteil >= EE_Parameter.Hoehe_MinGas) hoehenregler = EE_Parameter.Hoehe_MinGas; |
if(GasMischanteil < EE_Parameter.Hoehe_MinGas) hoehenregler = GasMischanteil; |
} |
if(hoehenregler > GasMischanteil) hoehenregler = GasMischanteil; // nicht mehr als Gas |
GasMischanteil = hoehenregler; |
} |
} |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Mischer und PI-Regler |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
DebugOut.Analog[7] = GasMischanteil; |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Gier-Anteil |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
#define MUL_G 1.0 |
GierMischanteil = MesswertGier - sollGier; // Regler für Gier |
//GierMischanteil = 0; |
if(GierMischanteil > (GasMischanteil / 2)) GierMischanteil = GasMischanteil / 2; |
if(GierMischanteil < -(GasMischanteil / 2)) GierMischanteil = -(GasMischanteil / 2); |
if(GierMischanteil > ((MAX_GAS - GasMischanteil))) GierMischanteil = ((MAX_GAS - GasMischanteil)); |
if(GierMischanteil < -((MAX_GAS - GasMischanteil))) GierMischanteil = -((MAX_GAS - GasMischanteil)); |
if(GasMischanteil < 20) GierMischanteil = 0; |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Nick-Achse |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
DiffNick = MesswertNick - (StickNick - GPS_Nick); // Differenz bestimmen |
if(IntegralFaktor) SummeNick += IntegralNick * IntegralFaktor - (StickNick - GPS_Nick); // I-Anteil bei Winkelregelung |
else SummeNick += DiffNick; // I-Anteil bei HH |
if(SummeNick > 0) SummeNick-= 2 ; else SummeNick += 2 ; |
if(SummeNick > 16000) SummeNick = 16000; |
if(SummeNick < -16000) SummeNick = -16000; |
pd_ergebnis = DiffNick + Ki * SummeNick; // PI-Regler für Nick |
// Motor Vorn |
tmp_int = (long)((long)Parameter_DynamicStability * (long)(GasMischanteil + abs(GierMischanteil)/2)) / 64; |
if(pd_ergebnis > tmp_int) pd_ergebnis = tmp_int; |
if(pd_ergebnis < -tmp_int) pd_ergebnis = -tmp_int; |
motorwert = GasMischanteil + pd_ergebnis + GierMischanteil; // Mischer |
if ((motorwert < 0)) motorwert = 0; |
else if(motorwert > MAX_GAS) motorwert = MAX_GAS; |
if (motorwert < MIN_GAS) motorwert = MIN_GAS; |
Motor_Vorne = motorwert; |
// Motor Heck |
motorwert = GasMischanteil - pd_ergebnis + GierMischanteil; |
if ((motorwert < 0)) motorwert = 0; |
else if(motorwert > MAX_GAS) motorwert = MAX_GAS; |
if (motorwert < MIN_GAS) motorwert = MIN_GAS; |
Motor_Hinten = motorwert; |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Roll-Achse |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
DiffRoll = MesswertRoll - (StickRoll - GPS_Roll); // Differenz bestimmen |
if(IntegralFaktor) SummeRoll += IntegralRoll * IntegralFaktor - (StickRoll - GPS_Roll);// I-Anteil bei Winkelregelung |
else SummeRoll += DiffRoll; // I-Anteil bei HH |
if(SummeRoll > 0) SummeRoll-= 2 ; else SummeRoll += 2 ; |
if(SummeRoll > 16000) SummeRoll = 16000; |
if(SummeRoll < -16000) SummeRoll = -16000; |
pd_ergebnis = DiffRoll + Ki * SummeRoll; // PI-Regler für Roll |
tmp_int = (long)((long)Parameter_DynamicStability * (long)(GasMischanteil + abs(GierMischanteil)/2)) / 64; |
if(pd_ergebnis > tmp_int) pd_ergebnis = tmp_int; |
if(pd_ergebnis < -tmp_int) pd_ergebnis = -tmp_int; |
// Motor Links |
motorwert = GasMischanteil + pd_ergebnis - GierMischanteil; |
if ((motorwert < 0)) motorwert = 0; |
else if(motorwert > MAX_GAS) motorwert = MAX_GAS; |
if (motorwert < MIN_GAS) motorwert = MIN_GAS; |
Motor_Links = motorwert; |
// Motor Rechts |
motorwert = GasMischanteil - pd_ergebnis - GierMischanteil; |
if ((motorwert < 0)) motorwert = 0; |
else if(motorwert > MAX_GAS) motorwert = MAX_GAS; |
if (motorwert < MIN_GAS) motorwert = MIN_GAS; |
Motor_Rechts = motorwert; |
// +++++++++++++++++++++++++++++++++++++++++++++++ |
} |
/branches/v0.60_MicroMag3_Nick666/V0.67g/fc.h |
---|
0,0 → 1,153 |
/*####################################################################################### |
Flight Control |
#######################################################################################*/ |
#ifndef _FC_H |
#define _FC_H |
extern volatile unsigned int I2CTimeout; |
extern unsigned char Sekunde,Minute; |
extern long Mess_IntegralNick,Mess_IntegralNick2; |
extern long Mess_IntegralRoll,Mess_IntegralRoll2; |
extern long Mess_Integral_Hoch; |
extern long Mess_Integral_Gier,Mess_Integral_Gier2; |
extern int KompassValue; |
extern int KompassStartwert; |
extern int KompassRichtung; |
extern long IntegralNick,IntegralNick2; |
extern long IntegralRoll,IntegralRoll2; |
extern long IntegralAccNick,IntegralAccRoll,IntegralAccZ; |
extern long Integral_Gier; |
extern int HoehenWert; |
extern int SollHoehe; |
extern int MesswertNick,MesswertRoll,MesswertGier; |
extern int AdNeutralNick,AdNeutralRoll,AdNeutralGier, Mittelwert_AccNick, Mittelwert_AccRoll,Mittelwert_AccHoch; |
extern volatile int NeutralAccX, NeutralAccY; |
extern volatile float NeutralAccZ; |
extern long Umschlag180Nick, Umschlag180Roll; |
extern signed int ExternStickNick,ExternStickRoll,ExternStickGier; |
extern unsigned char Parameter_UserParam1,Parameter_UserParam2,Parameter_UserParam3,Parameter_UserParam4,Parameter_UserParam5,Parameter_UserParam6,Parameter_UserParam7,Parameter_UserParam8; |
void MotorRegler(void); |
void SendMotorData(void); |
void CalibrierMittelwert(void); |
void Mittelwert(void); |
void SetNeutral(void); |
void Piep(unsigned char Anzahl); |
extern void DefaultKonstanten(void); |
void DefaultKonstanten1(void); |
void DefaultKonstanten2(void); |
extern unsigned char h,m,s; |
extern volatile unsigned char Timeout ; |
extern volatile int DiffNick,DiffRoll; |
extern int Poti1, Poti2, Poti3, Poti4; |
extern volatile unsigned char Motor_Vorne,Motor_Hinten,Motor_Rechts,Motor_Links, Count; |
extern unsigned char MotorWert[5]; |
extern volatile unsigned char SenderOkay; |
extern int StickNick,StickRoll,StickGier; |
extern char MotorenEin; |
extern void DefaultKonstanten1(void); |
extern void DefaultKonstanten2(void); |
struct acc_neutral_struct |
{ |
volatile int X; |
volatile int Y; |
volatile float Z; |
}; |
extern struct acc_neutral_struct acc_neutral; |
extern void calib_acc(void); |
struct mk_param_struct |
{ |
unsigned char Kanalbelegung[8]; // GAS[0], GIER[1],NICK[2], ROLL[3], POTI1, POTI2, POTI3 |
unsigned char GlobalConfig; // 0x01=Höhenregler aktiv,0x02=Kompass aktiv, 0x04=GPS aktiv, 0x08=Heading Hold aktiv |
unsigned char Hoehe_MinGas; // Wert : 0-100 |
unsigned char Luftdruck_D; // Wert : 0-250 |
unsigned char MaxHoehe; // Wert : 0-32 |
unsigned char Hoehe_P; // Wert : 0-32 |
unsigned char Hoehe_Verstaerkung; // Wert : 0-50 |
unsigned char Hoehe_ACC_Wirkung; // Wert : 0-250 |
unsigned char Stick_P; // Wert : 1-6 |
unsigned char Stick_D; // Wert : 0-64 |
unsigned char Gier_P; // Wert : 1-20 |
unsigned char Gas_Min; // Wert : 0-32 |
unsigned char Gas_Max; // Wert : 33-250 |
unsigned char GyroAccFaktor; // Wert : 1-64 |
unsigned char KompassWirkung; // Wert : 0-32 |
unsigned char Gyro_P; // Wert : 10-250 |
unsigned char Gyro_I; // Wert : 0-250 |
unsigned char UnterspannungsWarnung; // Wert : 0-250 |
unsigned char NotGas; // Wert : 0-250 //Gaswert bei Empängsverlust |
unsigned char NotGasZeit; // Wert : 0-250 // Zeitbis auf NotGas geschaltet wird, wg. Rx-Problemen |
unsigned char UfoAusrichtung; // X oder + Formation |
unsigned char I_Faktor; // Wert : 0-250 |
unsigned char UserParam1; // Wert : 0-250 |
unsigned char UserParam2; // Wert : 0-250 |
unsigned char UserParam3; // Wert : 0-250 |
unsigned char UserParam4; // Wert : 0-250 |
unsigned char ServoNickControl; // Wert : 0-250 // Stellung des Servos |
unsigned char ServoNickComp; // Wert : 0-250 // Einfluss Gyro/Servo |
unsigned char ServoNickMin; // Wert : 0-250 // Anschlag |
unsigned char ServoNickMax; // Wert : 0-250 // Anschlag |
unsigned char ServoNickRefresh; // |
unsigned char LoopGasLimit; // Wert: 0-250 max. Gas während Looping |
unsigned char LoopThreshold; // Wert: 0-250 Schwelle für Stickausschlag |
unsigned char LoopHysterese; // Wert: 0-250 Hysterese für Stickausschlag |
unsigned char AchsKopplung1; // Wert: 0-250 Faktor, mit dem Gier die Achsen Roll und Nick koppelt (NickRollMitkopplung) |
unsigned char AchsGegenKopplung1; // Wert: 0-250 Faktor, mit dem Gier die Achsen Roll und Nick Gegenkoppelt (NickRollGegenkopplung) |
unsigned char WinkelUmschlagNick; // Wert: 0-250 180°-Punkt |
unsigned char WinkelUmschlagRoll; // Wert: 0-250 180°-Punkt |
unsigned char GyroAccAbgleich; // 1/k (Koppel_ACC_Wirkung) |
unsigned char Driftkomp; |
unsigned char DynamicStability; |
unsigned char UserParam5; // Wert : 0-250 |
unsigned char UserParam6; // Wert : 0-250 |
unsigned char UserParam7; // Wert : 0-250 |
unsigned char UserParam8; // Wert : 0-250 |
//------------------------------------------------ |
unsigned char LoopConfig; // Bitcodiert: 0x01=oben, 0x02=unten, 0x04=links, 0x08=rechts / wird getrennt behandelt |
unsigned char ServoNickCompInvert; // Wert : 0-250 0 oder 1 // WICHTIG!!! am Ende lassen |
unsigned char Reserved[4]; |
char Name[12]; |
}; |
/* |
unsigned char ServoNickMax; // Wert : 0-250 |
unsigned char ServoNickRefresh; // |
unsigned char LoopGasLimit; // Wert: 0-250 max. Gas während Looping |
unsigned char LoopThreshold; // Wert: 0-250 Schwelle für Stickausschlag |
//------------------------------------------------ |
unsigned char LoopConfig; // Bitcodiert: 0x01=oben, 0x02=unten, 0x04=links, 0x08=rechts / wird getrennt behandelt |
unsigned char ServoNickCompInvert; // Wert : 0-250 0 oder 1 // WICHTIG!!! am Ende lassen |
unsigned char Reserved[4]; |
char Name[12]; |
*/ |
extern struct mk_param_struct EE_Parameter; |
extern unsigned char Parameter_Luftdruck_D; |
extern unsigned char Parameter_MaxHoehe; |
extern unsigned char Parameter_Hoehe_P; |
extern unsigned char Parameter_Hoehe_ACC_Wirkung; |
extern unsigned char Parameter_KompassWirkung; |
extern unsigned char Parameter_Gyro_P; |
extern unsigned char Parameter_Gyro_I; |
extern unsigned char Parameter_Gier_P; |
extern unsigned char Parameter_ServoNickControl; |
extern unsigned char Parameter_AchsKopplung1; |
extern unsigned char Parameter_AchsGegenKopplung1; |
#endif //_FC_H |
/branches/v0.60_MicroMag3_Nick666/V0.67g/flight.pnproj |
---|
0,0 → 1,0 |
<Project name="Flight-Ctrl"><File path="uart.h"></File><File path="main.c"></File><File path="main.h"></File><File path="makefile"></File><File path="uart.c"></File><File path="printf_P.h"></File><File path="printf_P.c"></File><File path="timer0.c"></File><File path="timer0.h"></File><File path="old_macros.h"></File><File path="twimaster.c"></File><File path="version.txt"></File><File path="twimaster.h"></File><File path="rc.c"></File><File path="rc.h"></File><File path="fc.h"></File><File path="fc.c"></File><File path="menu.h"></File><File path="menu.c"></File><File path="_Settings.h"></File><File path="analog.c"></File><File path="analog.h"></File><File path="GPS.c"></File><File path="gps.h"></File><File path="License.txt"></File><File path="eeprom.c"></File><File path="compass.c"></File><File path="compass.h"></File><File path="mymath.c"></File><File path="mymath.h"></File></Project> |
/branches/v0.60_MicroMag3_Nick666/V0.67g/flight.pnps |
---|
0,0 → 1,0 |
<pd><ViewState><e p="Flight-Ctrl" x="true"></e></ViewState></pd> |
/branches/v0.60_MicroMag3_Nick666/V0.67g/gps.h |
---|
0,0 → 1,14 |
extern signed int GPS_Nick; |
extern signed int GPS_Nick; |
extern signed int GPS_Nick; |
extern signed int GPS_Nick; |
extern signed int GPS_Nick; |
extern signed int GPS_Nick; |
extern signed int GPS_Nick; |
extern signed int GPS_Nick; |
extern signed int GPS_Nick; |
extern signed int GPS_Nick; |
extern signed int GPS_Roll; |
void GPS_Neutral(void); |
void GPS_BerechneZielrichtung(void); |
/branches/v0.60_MicroMag3_Nick666/V0.67g/main.c |
---|
0,0 → 1,263 |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Copyright (c) 04.2007 Holger Buss |
// + Nur für den privaten Gebrauch |
// + www.MikroKopter.com |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Es gilt für das gesamte Projekt (Hardware, Software, Binärfiles, Sourcecode und Dokumentation), |
// + dass eine Nutzung (auch auszugsweise) nur für den privaten und nicht-kommerziellen Gebrauch zulässig ist. |
// + Sollten direkte oder indirekte kommerzielle Absichten verfolgt werden, ist mit uns (info@mikrokopter.de) Kontakt |
// + bzgl. der Nutzungsbedingungen aufzunehmen. |
// + Eine kommerzielle Nutzung ist z.B.Verkauf von MikroKoptern, Bestückung und Verkauf von Platinen oder Bausätzen, |
// + Verkauf von Luftbildaufnahmen, usw. |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Werden Teile des Quellcodes (mit oder ohne Modifikation) weiterverwendet oder veröffentlicht, |
// + unterliegen sie auch diesen Nutzungsbedingungen und diese Nutzungsbedingungen incl. Copyright müssen dann beiliegen |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Sollte die Software (auch auszugesweise) oder sonstige Informationen des MikroKopter-Projekts |
// + auf anderen Webseiten oder Medien veröffentlicht werden, muss unsere Webseite "http://www.mikrokopter.de" |
// + eindeutig als Ursprung verlinkt und genannt werden |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Keine Gewähr auf Fehlerfreiheit, Vollständigkeit oder Funktion |
// + Benutzung auf eigene Gefahr |
// + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Die Portierung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur |
// + mit unserer Zustimmung zulässig |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Redistributions of source code (with or without modifications) must retain the above copyright notice, |
// + this list of conditions and the following disclaimer. |
// + * Neither the name of the copyright holders nor the names of contributors may be used to endorse or promote products derived |
// + from this software without specific prior written permission. |
// + * The use of this project (hardware, software, binary files, sources and documentation) is only permittet |
// + for non-commercial use (directly or indirectly) |
// + Commercial use (for excample: selling of MikroKopters, selling of PCBs, assembly, ...) is only permitted |
// + with our written permission |
// + * If sources or documentations are redistributet on other webpages, out webpage (http://www.MikroKopter.de) must be |
// + clearly linked as origin |
// + * porting to systems other than hardware from www.mikrokopter.de is not allowed |
// + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
// + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
// + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
// + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
// + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
// + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
// + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
// + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
// + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
// + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
// + POSSIBILITY OF SUCH DAMAGE. |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
#include "main.h" |
// Reservierung im EEPROM |
unsigned char EEPromArray[10] EEMEM; |
struct mk_param_struct EEParameterArray[5] EEMEM; |
unsigned char PlatinenVersion = 10; |
// -- Parametersatz aus EEPROM lesen --- |
// number [0..5] |
void ReadParameterSet(unsigned char number, unsigned char *buffer, unsigned char length) |
{ |
if (number > 5) number = 5; |
number--; // Auf Index 0 bis 4 anpassen |
eeprom_read_block(buffer, &EEParameterArray[number], length); |
} |
// -- Parametersatz ins EEPROM schreiben --- |
// number [0..5] |
void WriteParameterSet(unsigned char number, unsigned char *buffer, unsigned char length) |
{ |
if (number > 5) number = 5; |
number--; // Auf Index 0 bis 4 anpassen |
eeprom_write_block(buffer, &EEParameterArray[number], length); |
eeprom_write_byte(&EEPromArray[EEPROM_ADR_ACTIVE_SET], number); // diesen Parametersatz als aktuell merken |
} |
unsigned char GetActiveParamSetNumber(void) |
{ |
unsigned char set; |
set = eeprom_read_byte(&EEPromArray[EEPROM_ADR_ACTIVE_SET]); |
if(set > 5) |
{ |
set = 2; |
eeprom_write_byte(&EEPromArray[EEPROM_ADR_ACTIVE_SET], set); // diesen Parametersatz als aktuell merken |
} |
return(set); |
} |
//############################################################################ |
//Hauptprogramm |
int main (void) |
//############################################################################ |
{ |
unsigned int timer; |
//unsigned int timer2 = 0; |
DDRB = 0x00; |
PORTB = 0x00; |
for(timer = 0; timer < 1000; timer++); // verzögern |
if(PINB & 0x01) PlatinenVersion = 11; else PlatinenVersion = 10; |
DDRC = 0x81; // SCL |
PORTC = 0xff; // Pullup SDA |
DDRB = 0x1B; // LEDs und Druckoffset |
PORTB = 0x01; // LED_Rot |
DDRD = 0x3E; // Speaker & TXD & J3 J4 J5 |
DDRD |=0x80; // J7 |
PORTD = 0xF7; // LED |
MCUSR &=~(1<<WDRF); |
WDTCSR |= (1<<WDCE)|(1<<WDE); |
WDTCSR = 0; |
beeptime = 2000; |
StickGier = 0; PPM_in[K_GAS] = 0;StickRoll = 0; StickNick = 0; |
ROT_OFF; |
Timer_Init(); |
UART_Init(); |
rc_sum_init(); |
ADC_Init(); |
i2c_init(); |
init_MM3(); |
sei(); |
VersionInfo.Hauptversion = VERSION_HAUPTVERSION; |
VersionInfo.Nebenversion = VERSION_NEBENVERSION; |
VersionInfo.PCKompatibel = VERSION_KOMPATIBEL; |
printf("\n\rFlightControl\n\rHardware:%d.%d\n\rSoftware:V%d.%d%c ",PlatinenVersion/10,PlatinenVersion%10, VERSION_HAUPTVERSION, VERSION_NEBENVERSION,VERSION_INDEX + 'a'); |
printf("\n\r=============================="); |
GRN_ON; |
#define EE_DATENREVISION 68 // wird angepasst, wenn sich die EEPROM-Daten geändert haben |
if(eeprom_read_byte(&EEPromArray[EEPROM_ADR_VALID]) != EE_DATENREVISION) |
{ |
printf("\n\rInit. EEPROM: Generiere Default-Parameter..."); |
DefaultKonstanten1(); |
for (unsigned char i=0;i<6;i++) |
{ |
if(i==2) DefaultKonstanten2(); // Kamera |
if(i==3) DefaultKonstanten3(); // Beginner |
if(i>3) DefaultKonstanten2(); // Kamera |
WriteParameterSet(i, (unsigned char *) &EE_Parameter.Kanalbelegung[0], sizeof(struct mk_param_struct)); |
} |
eeprom_write_byte(&EEPromArray[EEPROM_ADR_ACTIVE_SET], 3); // default-Setting |
eeprom_write_byte(&EEPromArray[EEPROM_ADR_VALID], EE_DATENREVISION); |
} |
if(eeprom_read_byte(&EEPromArray[EEPROM_ADR_ACC_NICK]) > 4) |
{ |
printf("\n\rACC nicht abgeglichen!"); |
} |
ReadParameterSet(GetActiveParamSetNumber(), (unsigned char *) &EE_Parameter.Kanalbelegung[0], sizeof(struct mk_param_struct)); |
printf("\n\rBenutze Parametersatz %d", GetActiveParamSetNumber()); |
//kurze Wartezeit (sonst reagiert die "Kompass kalibrieren?"-Abfrage nicht |
timer = SetDelay(500); |
while(!CheckDelay(timer)); |
//Kompass kalibrieren? |
if(PPM_in[EE_Parameter.Kanalbelegung[K_GAS]] > 100 && PPM_in[EE_Parameter.Kanalbelegung[K_GIER]] > 100) |
{ |
printf("\n\rKalibriere Kompass"); |
calib_MM3(); |
} |
if(EE_Parameter.GlobalConfig & CFG_HOEHENREGELUNG) |
{ |
printf("\n\rAbgleich Luftdrucksensor.."); |
timer = SetDelay(1000); |
SucheLuftruckOffset(); |
while (!CheckDelay(timer)); |
printf("OK\n\r"); |
} |
SetNeutral(); |
ROT_OFF; |
beeptime = 2000; |
DebugIn.Analog[1] = 1000; |
DebugIn.Digital[0] = 0x55; |
printf("\n\rSteuerung: "); |
if (EE_Parameter.GlobalConfig & CFG_HEADING_HOLD) printf("HeadingHold"); |
else printf("Neutral"); |
printf("\n\n\r"); |
LcdClear(); |
I2CTimeout = 5000; |
while (1) |
{ |
if (UpdateMotor) // ReglerIntervall |
{ |
// SPI_TransmitByte(); |
UpdateMotor=0; |
//PORTD |= 0x08; |
MotorRegler(); |
//PORTD &= ~0x08; |
SendMotorData(); |
ROT_OFF; |
if(PcZugriff) PcZugriff--; |
else |
{ |
DubWiseKeys[0] = 0; |
DubWiseKeys[1] = 0; |
ExternStickNick = 0; |
ExternStickRoll = 0; |
ExternStickGier = 0; |
} |
if(SenderOkay) SenderOkay--; |
if(!I2CTimeout) |
{ |
I2CTimeout = 5; |
i2c_reset(); |
if((BeepMuster == 0xffff) && MotorenEin) |
{ |
beeptime = 10000; |
BeepMuster = 0x0080; |
} |
} |
else |
{ |
I2CTimeout--; |
ROT_OFF; |
} |
} |
if(SIO_DEBUG) |
{ |
DatenUebertragung(); |
BearbeiteRxDaten(); |
} |
else BearbeiteRxDaten(); |
if(CheckDelay(timer)) |
{ |
if(UBat < EE_Parameter.UnterspannungsWarnung) |
{ |
if(BeepMuster == 0xffff) |
{ |
beeptime = 6000; |
BeepMuster = 0x0300; |
} |
} |
// SPI_StartTransmitPacket(); |
timer = SetDelay(100); |
} |
} |
return (1); |
} |
/branches/v0.60_MicroMag3_Nick666/V0.67g/main.h |
---|
0,0 → 1,100 |
#ifndef _MAIN_H |
#define _MAIN_H |
//Hier die Quarz Frequenz einstellen |
#if defined (__AVR_ATmega32__) |
#define SYSCLK 20000000L //Quarz Frequenz in Hz |
#endif |
#if defined (__AVR_ATmega644__) |
#define SYSCLK 20000000L //Quarz Frequenz in Hz |
//#define SYSCLK 16000000L //Quarz Frequenz in Hz |
#endif |
// neue Hardware |
#define ROT_OFF {if(PlatinenVersion == 10) PORTB &=~0x01; else PORTB |= 0x01;} |
#define ROT_ON {if(PlatinenVersion == 10) PORTB |= 0x01; else PORTB &=~0x01;} |
#define ROT_FLASH PORTB ^= 0x01 |
#define GRN_OFF PORTB &=~0x02 |
#define GRN_ON PORTB |= 0x02 |
#define GRN_FLASH PORTB ^= 0x02 |
#define F_CPU SYSCLK |
//#ifndef F_CPU |
//#error ################## F_CPU nicht definiert oder ungültig ############# |
//#endif |
//+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
#define EEPROM_ADR_VALID 1 |
#define EEPROM_ADR_ACTIVE_SET 2 |
#define EEPROM_ADR_LAST_OFFSET 3 |
#define EEPROM_ADR_ACC_NICK 4 |
#define EEPROM_ADR_ACC_ROLL 6 |
#define EEPROM_ADR_ACC_Z 8 |
#define CFG_HOEHENREGELUNG 0x01 |
#define CFG_HOEHEN_SCHALTER 0x02 |
#define CFG_HEADING_HOLD 0x04 |
#define CFG_KOMPASS_AKTIV 0x08 |
#define CFG_KOMPASS_FIX 0x10 |
#define CFG_GPS_AKTIV 0x20 |
#define CFG_ACHSENKOPPLUNG_AKTIV 0x40 |
#define CFG_DREHRATEN_BEGRENZER 0x80 |
#define CFG_LOOP_OBEN 0x01 |
#define CFG_LOOP_UNTEN 0x02 |
#define CFG_LOOP_LINKS 0x04 |
#define CFG_LOOP_RECHTS 0x08 |
//#define SYSCLK |
//extern unsigned long SYSCLK; |
extern volatile unsigned char SenderOkay; |
extern unsigned char PlatinenVersion; |
void ReadParameterSet (unsigned char number, unsigned char *buffer, unsigned char length); |
void WriteParameterSet(unsigned char number, unsigned char *buffer, unsigned char length); |
extern unsigned char GetActiveParamSetNumber(void); |
extern unsigned char EEPromArray[]; |
#include <stdlib.h> |
#include <string.h> |
#include <avr/io.h> |
#include <avr/pgmspace.h> |
#include <avr/interrupt.h> |
#include <avr/eeprom.h> |
#include <avr/boot.h> |
#include <avr/wdt.h> |
#include "old_macros.h" |
#include "_Settings.h" |
#include "printf_P.h" |
#include "timer0.h" |
#include "uart.h" |
#include "analog.h" |
#include "twimaster.h" |
#include "menu.h" |
#include "rc.h" |
#include "fc.h" |
#include "gps.h" |
#include "compass.h" |
#include "mymath.h" |
#ifndef EEMEM |
#define EEMEM __attribute__ ((section (".eeprom"))) |
#endif |
#define DEBUG_DISPLAY_INTERVALL 123 // in ms |
#define DELAY_US(x) ((unsigned int)( (x) * 1e-6 * F_CPU )) |
#endif //_MAIN_H |
/branches/v0.60_MicroMag3_Nick666/V0.67g/makefile |
---|
0,0 → 1,419 |
#-------------------------------------------------------------------- |
# MCU name |
MCU = atmega644 |
F_CPU = 20000000 |
#------------------------------------------------------------------- |
HAUPT_VERSION = 0 |
NEBEN_VERSION = 67 |
VERSION_INDEX = 6 |
VERSION_KOMPATIBEL = 7 # PC-Kompatibilität |
#------------------------------------------------------------------- |
ifeq ($(MCU), atmega32) |
# FUSE_SETTINGS= -u -U lfuse:w:0xff:m -U hfuse:w:0xcf:m |
HEX_NAME = MEGA32 |
endif |
ifeq ($(MCU), atmega644) |
FUSE_SETTINGS = -u -U lfuse:w:0xff:m -U hfuse:w:0xdf:m |
#FUSE_SETTINGS = -U lfuse:w:0xff:m -U hfuse:w:0xdf:m |
# -u bei neuen Controllern wieder einspielen |
HEX_NAME = MEGA644 |
endif |
ifeq ($(F_CPU), 16000000) |
QUARZ = 16MHZ |
endif |
ifeq ($(F_CPU), 20000000) |
QUARZ = 20MHZ |
endif |
# Output format. (can be srec, ihex, binary) |
FORMAT = ihex |
# Target file name (without extension). |
ifeq ($(VERSION_INDEX), 0) |
TARGET = Flight-Ctrl_$(HEX_NAME)_V$(HAUPT_VERSION)_$(NEBEN_VERSION)a |
endif |
ifeq ($(VERSION_INDEX), 1) |
TARGET = Flight-Ctrl_$(HEX_NAME)_V$(HAUPT_VERSION)_$(NEBEN_VERSION)b |
endif |
ifeq ($(VERSION_INDEX), 2) |
TARGET = Flight-Ctrl_$(HEX_NAME)_V$(HAUPT_VERSION)_$(NEBEN_VERSION)c |
endif |
ifeq ($(VERSION_INDEX), 3) |
TARGET = Flight-Ctrl_$(HEX_NAME)_V$(HAUPT_VERSION)_$(NEBEN_VERSION)d |
endif |
ifeq ($(VERSION_INDEX), 4) |
TARGET = Flight-Ctrl_$(HEX_NAME)_V$(HAUPT_VERSION)_$(NEBEN_VERSION)e |
endif |
ifeq ($(VERSION_INDEX), 5) |
TARGET = Flight-Ctrl_$(HEX_NAME)_V$(HAUPT_VERSION)_$(NEBEN_VERSION)f |
endif |
ifeq ($(VERSION_INDEX), 6) |
TARGET = Flight-Ctrl_$(HEX_NAME)_V$(HAUPT_VERSION)_$(NEBEN_VERSION)g |
endif |
ifeq ($(VERSION_INDEX), 7) |
TARGET = Flight-Ctrl_$(HEX_NAME)_V$(HAUPT_VERSION)_$(NEBEN_VERSION)h |
endif |
# Optimization level, can be [0, 1, 2, 3, s]. 0 turns off optimization. |
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) |
OPT = s |
########################################################################################################## |
# List C source files here. (C dependencies are automatically generated.) |
SRC = main.c uart.c printf_P.c timer0.c analog.c menu.c |
SRC += twimaster.c rc.c fc.c GPS.c |
SRC += compass.c mymath.c |
#spi.c |
########################################################################################################## |
# List Assembler source files here. |
# Make them always end in a capital .S. Files ending in a lowercase .s |
# will not be considered source files but generated files (assembler |
# output from the compiler), and will be deleted upon "make clean"! |
# Even though the DOS/Win* filesystem matches both .s and .S the same, |
# it will preserve the spelling of the filenames, and gcc itself does |
# care about how the name is spelled on its command-line. |
ASRC = |
# List any extra directories to look for include files here. |
# Each directory must be seperated by a space. |
EXTRAINCDIRS = |
# Optional compiler flags. |
# -g: generate debugging information (for GDB, or for COFF conversion) |
# -O*: optimization level |
# -f...: tuning, see gcc manual and avr-libc documentation |
# -Wall...: warning level |
# -Wa,...: tell GCC to pass this to the assembler. |
# -ahlms: create assembler listing |
CFLAGS = -O$(OPT) \ |
-funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums \ |
-mtiny-stack -mcall-prologues \ |
-Wall -Wstrict-prototypes \ |
-Wa,-adhlns=$(<:.c=.lst) \ |
$(patsubst %,-I%,$(EXTRAINCDIRS)) |
# Set a "language standard" compiler flag. |
# Unremark just one line below to set the language standard to use. |
# gnu99 = C99 + GNU extensions. See GCC manual for more information. |
#CFLAGS += -std=c89 |
#CFLAGS += -std=gnu89 |
#CFLAGS += -std=c99 |
CFLAGS += -std=gnu99 |
CFLAGS += -DVERSION_HAUPTVERSION=$(HAUPT_VERSION) -DVERSION_NEBENVERSION=$(NEBEN_VERSION) -DVERSION_KOMPATIBEL=$(VERSION_KOMPATIBEL) -DVERSION_INDEX=$(VERSION_INDEX) |
# Optional assembler flags. |
# -Wa,...: tell GCC to pass this to the assembler. |
# -ahlms: create listing |
# -gstabs: have the assembler create line number information; note that |
# for use in COFF files, additional information about filenames |
# and function names needs to be present in the assembler source |
# files -- see avr-libc docs [FIXME: not yet described there] |
ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs |
# Optional linker flags. |
# -Wl,...: tell GCC to pass this to linker. |
# -Map: create map file |
# --cref: add cross reference to map file |
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref |
# Additional libraries |
# Minimalistic printf version |
#LDFLAGS += -Wl,-u,vfprintf -lprintf_min |
# Floating point printf version (requires -lm below) |
#LDFLAGS += -Wl,-u,vfprintf -lprintf_flt |
# -lm = math library |
LDFLAGS += -lm |
##LDFLAGS += -T./linkerfile/avr5.x |
# Programming support using avrdude. Settings and variables. |
# Programming hardware: alf avr910 avrisp bascom bsd |
# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500 |
# |
# Type: avrdude -c ? |
# to get a full listing. |
# |
#AVRDUDE_PROGRAMMER = stk200 |
AVRDUDE_PROGRAMMER = dt006 |
#AVRDUDE_PROGRAMMER = ponyser |
#falls Ponyser ausgewählt wird, muss sich unsere avrdude-Configdatei im Bin-Verzeichnis des Compilers befinden |
#AVRDUDE_PORT = com1 # programmer connected to serial device |
AVRDUDE_PORT = lpt1 # programmer connected to parallel port |
#AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex |
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex $(FUSE_SETTINGS) |
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep |
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) |
# Uncomment the following if you want avrdude's erase cycle counter. |
# Note that this counter needs to be initialized first using -Yn, |
# see avrdude manual. |
#AVRDUDE_ERASE += -y |
# Uncomment the following if you do /not/ wish a verification to be |
# performed after programming the device. |
AVRDUDE_FLAGS += -V |
# Increase verbosity level. Please use this when submitting bug |
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> |
# to submit bug reports. |
#AVRDUDE_FLAGS += -v -v |
# --------------------------------------------------------------------------- |
# Define directories, if needed. |
DIRAVR = c:/winavr |
DIRAVRBIN = $(DIRAVR)/bin |
DIRAVRUTILS = $(DIRAVR)/utils/bin |
DIRINC = . |
DIRLIB = $(DIRAVR)/avr/lib |
# Define programs and commands. |
SHELL = sh |
CC = avr-gcc |
OBJCOPY = avr-objcopy |
OBJDUMP = avr-objdump |
SIZE = avr-size |
# Programming support using avrdude. |
AVRDUDE = avrdude |
REMOVE = rm -f |
COPY = cp |
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex |
ELFSIZE = $(SIZE) -A $(TARGET).elf |
# Define Messages |
# English |
MSG_ERRORS_NONE = Errors: none |
MSG_BEGIN = -------- begin -------- |
MSG_END = -------- end -------- |
MSG_SIZE_BEFORE = Size before: |
MSG_SIZE_AFTER = Size after: |
MSG_COFF = Converting to AVR COFF: |
MSG_EXTENDED_COFF = Converting to AVR Extended COFF: |
MSG_FLASH = Creating load file for Flash: |
MSG_EEPROM = Creating load file for EEPROM: |
MSG_EXTENDED_LISTING = Creating Extended Listing: |
MSG_SYMBOL_TABLE = Creating Symbol Table: |
MSG_LINKING = Linking: |
MSG_COMPILING = Compiling: |
MSG_ASSEMBLING = Assembling: |
MSG_CLEANING = Cleaning project: |
# Define all object files. |
OBJ = $(SRC:.c=.o) $(ASRC:.S=.o) |
# Define all listing files. |
LST = $(ASRC:.S=.lst) $(SRC:.c=.lst) |
# Combine all necessary flags and optional flags. |
# Add target processor to flags. |
#ALL_CFLAGS = -mmcu=$(MCU) -DF_CPU=$(F_CPU) -I. $(CFLAGS) |
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) |
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) |
# Default target. |
all: begin gccversion sizebefore $(TARGET).elf $(TARGET).hex $(TARGET).eep \ |
$(TARGET).lss $(TARGET).sym sizeafter finished end |
# Eye candy. |
# AVR Studio 3.x does not check make's exit code but relies on |
# the following magic strings to be generated by the compile job. |
begin: |
@echo |
@echo $(MSG_BEGIN) |
finished: |
@echo $(MSG_ERRORS_NONE) |
end: |
@echo $(MSG_END) |
@echo |
# Display size of file. |
sizebefore: |
@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); echo; fi |
sizeafter: |
@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi |
# Display compiler version information. |
gccversion : |
@$(CC) --version |
# Convert ELF to COFF for use in debugging / simulating in |
# AVR Studio or VMLAB. |
COFFCONVERT=$(OBJCOPY) --debugging \ |
--change-section-address .data-0x800000 \ |
--change-section-address .bss-0x800000 \ |
--change-section-address .noinit-0x800000 \ |
--change-section-address .eeprom-0x810000 |
coff: $(TARGET).elf |
@echo |
@echo $(MSG_COFF) $(TARGET).cof |
$(COFFCONVERT) -O coff-avr $< $(TARGET).cof |
extcoff: $(TARGET).elf |
@echo |
@echo $(MSG_EXTENDED_COFF) $(TARGET).cof |
$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof |
# Program the device. |
program: $(TARGET).hex $(TARGET).eep |
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) |
# Create final output files (.hex, .eep) from ELF output file. |
%.hex: %.elf |
@echo |
@echo $(MSG_FLASH) $@ |
$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@ |
%.eep: %.elf |
@echo |
@echo $(MSG_EEPROM) $@ |
-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ |
--change-section-lma .eeprom=0 -O $(FORMAT) $< $@ |
# Create extended listing file from ELF output file. |
%.lss: %.elf |
@echo |
@echo $(MSG_EXTENDED_LISTING) $@ |
$(OBJDUMP) -h -S $< > $@ |
# Create a symbol table from ELF output file. |
%.sym: %.elf |
@echo |
@echo $(MSG_SYMBOL_TABLE) $@ |
avr-nm -n $< > $@ |
# Link: create ELF output file from object files. |
.SECONDARY : $(TARGET).elf |
.PRECIOUS : $(OBJ) |
%.elf: $(OBJ) |
@echo |
@echo $(MSG_LINKING) $@ |
$(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS) |
# Compile: create object files from C source files. |
%.o : %.c |
@echo |
@echo $(MSG_COMPILING) $< |
$(CC) -c $(ALL_CFLAGS) $< -o $@ |
# Compile: create assembler files from C source files. |
%.s : %.c |
$(CC) -S $(ALL_CFLAGS) $< -o $@ |
# Assemble: create object files from assembler source files. |
%.o : %.S |
@echo |
@echo $(MSG_ASSEMBLING) $< |
$(CC) -c $(ALL_ASFLAGS) $< -o $@ |
# Target: clean project. |
clean: begin clean_list finished end |
clean_list : |
@echo |
@echo $(MSG_CLEANING) |
# $(REMOVE) $(TARGET).hex |
$(REMOVE) $(TARGET).eep |
$(REMOVE) $(TARGET).obj |
$(REMOVE) $(TARGET).cof |
$(REMOVE) $(TARGET).elf |
$(REMOVE) $(TARGET).map |
$(REMOVE) $(TARGET).obj |
$(REMOVE) $(TARGET).a90 |
$(REMOVE) $(TARGET).sym |
$(REMOVE) $(TARGET).lnk |
$(REMOVE) $(TARGET).lss |
$(REMOVE) $(OBJ) |
$(REMOVE) $(LST) |
$(REMOVE) $(SRC:.c=.s) |
$(REMOVE) $(SRC:.c=.d) |
# Automatically generate C source code dependencies. |
# (Code originally taken from the GNU make user manual and modified |
# (See README.txt Credits).) |
# |
# Note that this will work with sh (bash) and sed that is shipped with WinAVR |
# (see the SHELL variable defined above). |
# This may not work with other shells or other seds. |
# |
%.d: %.c |
set -e; $(CC) -MM $(ALL_CFLAGS) $< \ |
| sed 's,\(.*\)\.o[ :]*,\1.o \1.d : ,g' > $@; \ |
[ -s $@ ] || rm -f $@ |
# Remove the '-' if you want to see the dependency files generated. |
-include $(SRC:.c=.d) |
# Listing of phony targets. |
.PHONY : all begin finish end sizebefore sizeafter gccversion coff extcoff \ |
clean clean_list program |
/branches/v0.60_MicroMag3_Nick666/V0.67g/menu.c |
---|
0,0 → 1,139 |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Copyright (c) 04.2007 Holger Buss |
// + only for non-profit use |
// + www.MikroKopter.com |
// + see the File "License.txt" for further Informations |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
#include "main.h" |
unsigned int TestInt = 0; |
#define ARRAYGROESSE 10 |
unsigned char Array[ARRAYGROESSE] = {1,2,3,4,5,6,7,8,9,10}; |
char DisplayBuff[80] = "Hallo Welt"; |
unsigned char DispPtr = 0; |
unsigned char RemoteTasten = 0; |
#define KEY1 0x01 |
#define KEY2 0x02 |
#define KEY3 0x04 |
#define KEY4 0x08 |
#define KEY5 0x10 |
void LcdClear(void) |
{ |
unsigned char i; |
for(i=0;i<80;i++) DisplayBuff[i] = ' '; |
} |
void Menu(void) |
{ |
static unsigned char MaxMenue = 12,MenuePunkt=0; |
if(RemoteTasten & KEY1) { if(MenuePunkt) MenuePunkt--; else MenuePunkt = MaxMenue; LcdClear(); RemotePollDisplayLine = -1; } |
if(RemoteTasten & KEY2) { MenuePunkt++; LcdClear(); RemotePollDisplayLine = -1;} |
if((RemoteTasten & KEY1) && (RemoteTasten & KEY2)) MenuePunkt = 0; |
LCD_printfxy(17,0,"[%i]",MenuePunkt); |
switch(MenuePunkt) |
{ |
case 0: |
LCD_printfxy(0,0,"++ MikroKopter ++"); |
LCD_printfxy(0,1,"HW:V%d.%d SW:%d.%d%c",PlatinenVersion/10,PlatinenVersion%10,VERSION_HAUPTVERSION, VERSION_NEBENVERSION,VERSION_INDEX+'a'); |
LCD_printfxy(0,2,"Setting: %d ",GetActiveParamSetNumber()); |
LCD_printfxy(0,3,"(c) Holger Buss"); |
// if(RemoteTasten & KEY3) TestInt--; |
// if(RemoteTasten & KEY4) TestInt++; |
break; |
case 1: |
if(EE_Parameter.GlobalConfig & CFG_HOEHENREGELUNG) |
{ |
LCD_printfxy(0,0,"Hoehe: %5i",HoehenWert); |
LCD_printfxy(0,1,"SollHoehe: %5i",SollHoehe); |
LCD_printfxy(0,2,"Luftdruck: %5i",MessLuftdruck); |
LCD_printfxy(0,3,"Off : %5i",DruckOffsetSetting); |
} |
else |
{ |
LCD_printfxy(0,1,"Keine "); |
LCD_printfxy(0,2,"Höhenregelung"); |
} |
break; |
case 2: |
LCD_printfxy(0,0,"akt. Lage"); |
LCD_printfxy(0,1,"Nick: %5i",IntegralNick/1024); |
LCD_printfxy(0,2,"Roll: %5i",IntegralRoll/1024); |
LCD_printfxy(0,3,"Kompass: %5i",KompassValue); |
break; |
case 3: |
LCD_printfxy(0,0,"K1:%4i K2:%4i ",PPM_in[1],PPM_in[2]); |
LCD_printfxy(0,1,"K3:%4i K4:%4i ",PPM_in[3],PPM_in[4]); |
LCD_printfxy(0,2,"K5:%4i K6:%4i ",PPM_in[5],PPM_in[6]); |
LCD_printfxy(0,3,"K7:%4i K8:%4i ",PPM_in[7],PPM_in[8]); |
break; |
case 4: |
LCD_printfxy(0,0,"Ni:%4i Ro:%4i ",PPM_in[EE_Parameter.Kanalbelegung[K_NICK]],PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]]); |
LCD_printfxy(0,1,"Gs:%4i Gi:%4i ",PPM_in[EE_Parameter.Kanalbelegung[K_GAS]],PPM_in[EE_Parameter.Kanalbelegung[K_GIER]]); |
LCD_printfxy(0,2,"P1:%4i P2:%4i ",PPM_in[EE_Parameter.Kanalbelegung[K_POTI1]],PPM_in[EE_Parameter.Kanalbelegung[K_POTI2]]); |
LCD_printfxy(0,3,"P3:%4i P4:%4i ",PPM_in[EE_Parameter.Kanalbelegung[K_POTI3]],PPM_in[EE_Parameter.Kanalbelegung[K_POTI4]]); |
break; |
case 5: |
LCD_printfxy(0,0,"Gyro - Sensor"); |
if(PlatinenVersion == 10) |
{ |
LCD_printfxy(0,1,"Nick %4i (%3i)",AdWertNick - AdNeutralNick, AdNeutralNick); |
LCD_printfxy(0,2,"Roll %4i (%3i)",AdWertRoll - AdNeutralRoll, AdNeutralRoll); |
LCD_printfxy(0,3,"Gier %4i (%3i)",MesswertGier, AdNeutralGier); |
} |
else |
{ |
LCD_printfxy(0,1,"Nick %4i (%3i)",AdWertNick - AdNeutralNick, AdNeutralNick/2); |
LCD_printfxy(0,2,"Roll %4i (%3i)",AdWertRoll - AdNeutralRoll, AdNeutralRoll/2); |
LCD_printfxy(0,3,"Gier %4i (%3i)",MesswertGier, AdNeutralGier/2); |
} |
break; |
case 6: |
LCD_printfxy(0,0,"ACC - Sensor"); |
LCD_printfxy(0,1,"Nick %4i (%3i)",AdWertAccNick,NeutralAccX); |
LCD_printfxy(0,2,"Roll %4i (%3i)",AdWertAccRoll,NeutralAccY); |
LCD_printfxy(0,3,"Hoch %4i (%3i)",Mittelwert_AccHoch/*accumulate_AccHoch / messanzahl_AccHoch*/,(int)NeutralAccZ); |
break; |
case 7: |
LCD_printfxy(0,1,"Spannung: %5i",UBat); |
LCD_printfxy(0,2,"Empf.Pegel:%5i",SenderOkay); |
break; |
case 8: |
LCD_printfxy(0,0,"Kompass "); |
LCD_printfxy(0,1,"Richtung: %5i",KompassRichtung); |
LCD_printfxy(0,2,"Messwert: %5i",KompassValue); |
LCD_printfxy(0,3,"Start: %5i",KompassStartwert); |
break; |
case 9: |
LCD_printfxy(0,0,"Poti1: %3i",Poti1); |
LCD_printfxy(0,1,"Poti2: %3i",Poti2); |
LCD_printfxy(0,2,"Poti3: %3i",Poti3); |
LCD_printfxy(0,3,"Poti4: %3i",Poti4); |
break; |
case 10: |
LCD_printfxy(0,0,"Servo " ); |
LCD_printfxy(0,1,"Setpoint %3i",Parameter_ServoNickControl); |
LCD_printfxy(0,2,"Stellung: %3i",ServoValue); |
LCD_printfxy(0,3,"Range:%3i-%3i",EE_Parameter.ServoNickMin,EE_Parameter.ServoNickMax); |
break; |
case 11: |
LCD_printfxy(0,0,"MM3 Off"); |
LCD_printfxy(0,1,"X_Offset: %3i",MM3_calib.X_off); |
LCD_printfxy(0,2,"Y_Offset: %3i",MM3_calib.Y_off); |
LCD_printfxy(0,3,"Z_Offset: %3i",MM3_calib.Z_off); |
break; |
case 12: |
LCD_printfxy(0,0,"MM3 Range"); |
LCD_printfxy(0,1,"X_Range: %4i",MM3_calib.X_range); |
LCD_printfxy(0,2,"Y_Range: %4i",MM3_calib.Y_range); |
LCD_printfxy(0,3,"Z_Range: %4i",MM3_calib.Z_range); |
break; |
default: MaxMenue = MenuePunkt - 1; |
MenuePunkt = 0; |
break; |
} |
RemoteTasten = 0; |
} |
/branches/v0.60_MicroMag3_Nick666/V0.67g/menu.h |
---|
0,0 → 1,6 |
extern void Menu(void); |
extern void LcdClear(void); |
extern char DisplayBuff[80]; |
extern unsigned char DispPtr; |
extern unsigned char RemoteTasten; |
/branches/v0.60_MicroMag3_Nick666/V0.67g/mymath.c |
---|
0,0 → 1,126 |
/* |
Copyright 2007, Niklas Nold |
This program (files math.c and math.h) is free software; you can redistribute it and/or modify |
it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; |
either version 3 of the License, or (at your option) any later version. |
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; |
without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License |
along with this program. If not, see <http://www.gnu.org/licenses/>. |
Please note: All the other files for the project "Mikrokopter" by H. Buss are under the license (license_buss.txt) published by www.mikrokopter.de |
*/ |
#include "main.h" |
const uint8_t pgm_atan[270] PROGMEM = {0,1,2,3,5,6,7,8,9,10,11,12,13,15,16,17,18,19,20,21,22,23,24,25,26,27,27,28,29,30,31,32,33,33,34,35,36,37,37,38,39,39,40,41,41,42,43,43,44,44,45,46,46,47,47,48,48,49,49,50,50,51,51,52,52,52,53,53,54,54,54,55,55,56,56,56,57,57,57,58,58,58,59,59,59,60,60,60,60,61,61,61,61,62,62,62,62,63,63,63,63,64,64,64,64,65,65,65,65,65,66,66,66,66,66,67,67,67,67,67,67,68,68,68,68,68,68,69,69,69,69,69,69,69,70,70,70,70,70,70,70,70,71,71,71,71,71,71,71,71,72,72,72,72,72,72,72,72,72,73,73,73,73,73,73,73,73,73,73,74,74,74,74,74,74,74,74,74,74,74,74,75,75,75,75,75,75,75,75,75,75,75,75,75,76,76,76,76,76,76,76,76,76,76,76,76,76,76,76,77,77,77,77,77,77,77,77,77,77,77,77,77,77,77,77,77,78,78,78,78,78,78,78,78,78,78,78,78,78,78,78,78,78,78,78,78,79,79,79,79,79,79,79,79,79,79,79,79,79,79,79,79,79,79,79,79,79,79,79,79}; |
//############################################################################ |
// Arkustangens2 im Gradmaß |
signed int atan2_i(signed int x, signed int y) |
//############################################################################ |
{ |
int i,angle; |
int8_t m; |
if (!x && !y) return 0; //atan2 = 0 für x und y = 0 |
if (y < 0) m=-1; |
else m=1; |
if (x==0) return (90*m); // atan2 = 90° für x = 0 |
i = abs(((long)y*50) / x); // Berechne i für die Lookup table (Schrittweite atan(x) ist 0.02 -> *50) |
if (i<270) angle = pgm_read_byte(&pgm_atan[i]); // Lookup für 1° bis 79° |
else if (i>5750) angle = 90; // Grenzwert ist 90° |
else if (i>=1910) angle = 89; // 89° bis 80° über Wertebereiche |
else if (i>=1150) angle = 88; |
else if (i>=820) angle = 87; |
else if (i>=640) angle = 86; |
else if (i>=520) angle = 85; |
else if (i>=440) angle = 84; |
else if (i>=380) angle = 83; |
else if (i>=335) angle = 82; |
else if (i>=299) angle = 81; |
else angle = 80; // (i>=270) |
if (x > 0) return (angle*m); // Quadrant I und IV |
else if ((x < 0) && (m > 0)) return (-angle + 180); // Quadrant II |
else return (angle - 180); // x < 0 && y < 0 Quadrant III |
} |
const float pgm_sinus_f[91] PROGMEM = {0.0,0.0174524,0.0348995,0.0523360,0.0697565,0.0871557,0.1045285,0.1218693,0.1391731,0.1564345,0.1736482,0.1908090,0.2079117,0.2249510,0.2419219,0.2588190,0.2756373,0.2923717,0.3090170,0.3255681,0.3420201,0.3583679,0.3746066,0.3907311,0.4067366,0.4226182,0.4383711,0.4539905,0.4694715,0.4848096,0.5000000,0.5150381,0.5299193,0.5446390,0.5591929,0.5735764,0.5877852,0.6018150,0.6156615,0.6293204,0.6427876,0.6560590,0.6691306,0.6819983,0.6946584,0.7071068,0.7193398,0.7313537,0.7431448,0.7547096,0.7660444,0.7771459,0.7880107,0.7986355,0.8090170,0.8191520,0.8290376,0.8386706,0.8480481,0.8571673,0.8660254,0.8746197,0.8829476,0.8910065,0.8987940,0.9063078,0.9135454,0.9205048,0.9271838,0.9335804,0.9396926,0.9455186,0.9510565,0.9563047,0.9612617,0.9659258,0.9702957,0.9743701,0.9781476,0.9816272,0.9848077,0.9876883,0.9902681,0.9925461,0.9945219,0.9961947,0.9975640,0.9986295,0.9993908,0.9998477,1.0}; |
inline float pgm_read_float(const float *addr) |
{ |
union |
{ |
uint16_t i[2]; // 2 16-bit-Worte |
float f; |
} u; |
u.i[0]=pgm_read_word((PGM_P)addr); |
u.i[1]=pgm_read_word((PGM_P)addr+2); |
return u.f; |
} |
//############################################################################ |
// Kosinusfunktion im Gradmaß |
float cos_f(signed int winkel) |
//############################################################################ |
{ |
return (sin_f(90-winkel)); |
} |
//############################################################################ |
// Sinusfunktion im Gradmaß |
float sin_f(signed int winkel) |
//############################################################################ |
{ |
short int m,n; |
float sinus; |
//winkel = winkel % 360; |
if (winkel < 0) |
{ |
m = -1; |
winkel = abs(winkel); |
} |
else m = +1; |
// Quadranten auswerten |
if (winkel <= 90) n=1; |
else if ((winkel > 90 ) && (winkel <= 180)) {winkel = 180 - winkel; n = 1;} |
else if ((winkel > 180 ) && (winkel <= 270)) {winkel = winkel - 180; n = -1;} |
else {winkel = 360 - winkel; n = -1;} //if ((winkel > 270) && (winkel <= 360)) |
sinus = pgm_read_float(&pgm_sinus_f[winkel]); |
return (sinus*m*n); |
} |
/* |
const uint8_t pgm_asin[201] PROGMEM = {0,0,1,1,1,1,2,2,2,3,3,3,3,4,4,4,5,5,5,5,6,6,6,7,7,7,7,8,8,8,9,9,9,9,10,10,10,11,11,11,12,12,12,12,13,13,13,14,14,14,14,15,15,15,16,16,16,17,17,17,17,18,18,18,19,19,19,20,20,20,20,21,21,21,22,22,22,23,23,23,24,24,24,25,25,25,25,26,26,26,27,27,27,28,28,28,29,29,29,30,30,30,31,31,31,32,32,32,33,33,33,34,34,34,35,35,35,36,36,37,37,37,38,38,38,39,39,39,40,40,41,41,41,42,42,42,43,43,44,44,44,45,45,46,46,46,47,47,48,48,49,49,49,50,50,51,51,52,52,53,53,54,54,55,55,56,56,57,57,58,58,59,59,60,60,61,62,62,63,64,64,65,66,66,67,68,68,69,70,71,72,73,74,75,76,77,79,80,82,84,90}; |
//############################################################################ |
// Akurssinusfunktion im Gradmaß |
int8_t asin_i(signed int i) |
//############################################################################ |
{ |
signed char m; |
if (i < 0) {m=-1;i=abs(i);} |
else m=1; |
i = i % 200; |
return (pgm_read_byte(&pgm_asin[i]) * m); |
} |
*/ |
/branches/v0.60_MicroMag3_Nick666/V0.67g/mymath.h |
---|
0,0 → 1,11 |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Peter Muehlenbrock |
// Definitionen fuer Modul math |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
#include "main.h" |
extern signed int atan2_i(signed int x, signed int y); |
extern float cos_f(signed int winkel); |
extern float sin_f(signed int winkel); |
//extern int8_t asin_i(signed int i); |
/branches/v0.60_MicroMag3_Nick666/V0.67g/old_macros.h |
---|
0,0 → 1,47 |
/* |
For backwards compatibility only. |
Ingo Busker ingo@mikrocontroller.com |
*/ |
#ifndef cbi |
#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit)) |
#endif |
#ifndef sbi |
#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit)) |
#endif |
#ifndef inb |
#define inb(sfr) _SFR_BYTE(sfr) |
#endif |
#ifndef outb |
#define outb(sfr, val) (_SFR_BYTE(sfr) = (val)) |
#endif |
#ifndef inw |
#define inw(sfr) _SFR_WORD(sfr) |
#endif |
#ifndef outw |
#define outw(sfr, val) (_SFR_WORD(sfr) = (val)) |
#endif |
#ifndef outp |
#define outp(val, sfr) outb(sfr, val) |
#endif |
#ifndef inp |
#define inp(sfr) inb(sfr) |
#endif |
#ifndef BV |
#define BV(bit) _BV(bit) |
#endif |
#ifndef PRG_RDB |
#define PRG_RDB pgm_read_byte |
#endif |
/branches/v0.60_MicroMag3_Nick666/V0.67g/printf_P.c |
---|
0,0 → 1,480 |
// Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist nicht von der Lizenz für den MikroKopter-Teil unterstellt |
/* |
Copyright (C) 1993 Free Software Foundation |
This file is part of the GNU IO Library. This library is free |
software; you can redistribute it and/or modify it under the |
terms of the GNU General Public License as published by the |
Free Software Foundation; either version 2, or (at your option) |
any later version. |
This library is distributed in the hope that it will be useful, |
but WITHOUT ANY WARRANTY; without even the implied warranty of |
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
GNU General Public License for more details. |
You should have received a copy of the GNU General Public License |
along with this library; see the file COPYING. If not, write to the Free |
Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
As a special exception, if you link this library with files |
compiled with a GNU compiler to produce an executable, this does not cause |
the resulting executable to be covered by the GNU General Public License. |
This exception does not however invalidate any other reasons why |
the executable file might be covered by the GNU General Public License. */ |
/* |
* Copyright (c) 1990 Regents of the University of California. |
* All rights reserved. |
* |
* Redistribution and use in source and binary forms, with or without |
* modification, are permitted provided that the following conditions |
* are met: |
* 1. Redistributions of source code must retain the above copyright |
* notice, this list of conditions and the following disclaimer. |
* 2. Redistributions in binary form must reproduce the above copyright |
* notice, this list of conditions and the following disclaimer in the |
* documentation and/or other materials provided with the distribution. |
* 3. [rescinded 22 July 1999] |
* 4. Neither the name of the University nor the names of its contributors |
* may be used to endorse or promote products derived from this software |
* without specific prior written permission. |
* |
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND |
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE |
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
* SUCH DAMAGE. |
*/ |
/****************************************************************************** |
This file is a patched version of printf called _printf_P |
It is made to work with avr-gcc for Atmel AVR MCUs. |
There are some differences from standard printf: |
1. There is no floating point support (with fp the code is about 8K!) |
2. Return type is void |
3. Format string must be in program memory (by using macro printf this is |
done automaticaly) |
4. %n is not implemented (just remove the comment around it if you need it) |
5. If LIGHTPRINTF is defined, the code is about 550 bytes smaller and the |
folowing specifiers are disabled : |
space # * . - + p s o O |
6. A function void uart_sendchar(char c) is used for output. The UART must |
be initialized before using printf. |
Alexander Popov |
sasho@vip.orbitel.bg |
******************************************************************************/ |
/* |
* Actual printf innards. |
* |
* This code is large and complicated... |
*/ |
#include <string.h> |
#ifdef __STDC__ |
#include <stdarg.h> |
#else |
#include <varargs.h> |
#endif |
#include "main.h" |
//#define LIGHTPRINTF |
char PrintZiel; |
char Putchar(char zeichen) |
{ |
if(PrintZiel == OUT_LCD) { DisplayBuff[DispPtr++] = zeichen; return(1);} |
else return(uart_putchar(zeichen)); |
} |
void PRINT(const char * ptr, unsigned int len) |
{ |
for(;len;len--) Putchar(*ptr++); |
} |
void PRINTP(const char * ptr, unsigned int len) |
{ |
for(;len;len--) Putchar(pgm_read_byte(ptr++)); |
} |
void PAD_SP(signed char howmany) |
{ |
for(;howmany>0;howmany--) Putchar(' '); |
} |
void PAD_0(signed char howmany) |
{ |
for(;howmany>0;howmany--) Putchar('0'); |
} |
#define BUF 40 |
/* |
* Macros for converting digits to letters and vice versa |
*/ |
#define to_digit(c) ((c) - '0') |
#define is_digit(c) ((c)<='9' && (c)>='0') |
#define to_char(n) ((n) + '0') |
/* |
* Flags used during conversion. |
*/ |
#define LONGINT 0x01 /* long integer */ |
#define LONGDBL 0x02 /* long double; unimplemented */ |
#define SHORTINT 0x04 /* short integer */ |
#define ALT 0x08 /* alternate form */ |
#define LADJUST 0x10 /* left adjustment */ |
#define ZEROPAD 0x20 /* zero (as opposed to blank) pad */ |
#define HEXPREFIX 0x40 /* add 0x or 0X prefix */ |
void _printf_P (char ziel,char const *fmt0, ...) /* Works with string from FLASH */ |
{ |
va_list ap; |
register const char *fmt; /* format string */ |
register char ch; /* character from fmt */ |
register int n; /* handy integer (short term usage) */ |
register char *cp; /* handy char pointer (short term usage) */ |
const char *fmark; /* for remembering a place in fmt */ |
register unsigned char flags; /* flags as above */ |
signed char width; /* width from format (%8d), or 0 */ |
signed char prec; /* precision from format (%.3d), or -1 */ |
char sign; /* sign prefix (' ', '+', '-', or \0) */ |
unsigned long _ulong=0; /* integer arguments %[diouxX] */ |
#define OCT 8 |
#define DEC 10 |
#define HEX 16 |
unsigned char base; /* base for [diouxX] conversion */ |
signed char dprec; /* a copy of prec if [diouxX], 0 otherwise */ |
signed char dpad; /* extra 0 padding needed for integers */ |
signed char fieldsz; /* field size expanded by sign, dpad etc */ |
/* The initialization of 'size' is to suppress a warning that |
'size' might be used unitialized. It seems gcc can't |
quite grok this spaghetti code ... */ |
signed char size = 0; /* size of converted field or string */ |
char buf[BUF]; /* space for %c, %[diouxX], %[eEfgG] */ |
char ox[2]; /* space for 0x hex-prefix */ |
PrintZiel = ziel; // bestimmt, LCD oder UART |
va_start(ap, fmt0); |
fmt = fmt0; |
/* |
* Scan the format for conversions (`%' character). |
*/ |
for (;;) { |
for (fmark = fmt; (ch = pgm_read_byte(fmt)) != '\0' && ch != '%'; fmt++) |
/* void */; |
if ((n = fmt - fmark) != 0) { |
PRINTP(fmark, n); |
} |
if (ch == '\0') |
goto done; |
fmt++; /* skip over '%' */ |
flags = 0; |
dprec = 0; |
width = 0; |
prec = -1; |
sign = '\0'; |
rflag: ch = PRG_RDB(fmt++); |
reswitch: |
#ifdef LIGHTPRINTF |
if (ch=='o' || ch=='u' || (ch|0x20)=='x') { |
#else |
if (ch=='u' || (ch|0x20)=='x') { |
#endif |
if (flags&LONGINT) { |
_ulong=va_arg(ap, unsigned long); |
} else { |
register unsigned int _d; |
_d=va_arg(ap, unsigned int); |
_ulong = flags&SHORTINT ? (unsigned long)(unsigned short)_d : (unsigned long)_d; |
} |
} |
#ifndef LIGHTPRINTF |
if(ch==' ') { |
/* |
* ``If the space and + flags both appear, the space |
* flag will be ignored.'' |
* -- ANSI X3J11 |
*/ |
if (!sign) |
sign = ' '; |
goto rflag; |
} else if (ch=='#') { |
flags |= ALT; |
goto rflag; |
} else if (ch=='*'||ch=='-') { |
if (ch=='*') { |
/* |
* ``A negative field width argument is taken as a |
* - flag followed by a positive field width.'' |
* -- ANSI X3J11 |
* They don't exclude field widths read from args. |
*/ |
if ((width = va_arg(ap, int)) >= 0) |
goto rflag; |
width = -width; |
} |
flags |= LADJUST; |
flags &= ~ZEROPAD; /* '-' disables '0' */ |
goto rflag; |
} else if (ch=='+') { |
sign = '+'; |
goto rflag; |
} else if (ch=='.') { |
if ((ch = PRG_RDB(fmt++)) == '*') { |
n = va_arg(ap, int); |
prec = n < 0 ? -1 : n; |
goto rflag; |
} |
n = 0; |
while (is_digit(ch)) { |
n = n*10 + to_digit(ch); |
ch = PRG_RDB(fmt++); |
} |
prec = n < 0 ? -1 : n; |
goto reswitch; |
} else |
#endif /* LIGHTPRINTF */ |
if (ch=='0') { |
/* |
* ``Note that 0 is taken as a flag, not as the |
* beginning of a field width.'' |
* -- ANSI X3J11 |
*/ |
if (!(flags & LADJUST)) |
flags |= ZEROPAD; /* '-' disables '0' */ |
goto rflag; |
} else if (ch>='1' && ch<='9') { |
n = 0; |
do { |
n = 10 * n + to_digit(ch); |
ch = PRG_RDB(fmt++); |
} while (is_digit(ch)); |
width = n; |
goto reswitch; |
} else if (ch=='h') { |
flags |= SHORTINT; |
goto rflag; |
} else if (ch=='l') { |
flags |= LONGINT; |
goto rflag; |
} else if (ch=='c') { |
*(cp = buf) = va_arg(ap, int); |
size = 1; |
sign = '\0'; |
} else if (ch=='D'||ch=='d'||ch=='i') { |
if(ch=='D') |
flags |= LONGINT; |
if (flags&LONGINT) { |
_ulong=va_arg(ap, long); |
} else { |
register int _d; |
_d=va_arg(ap, int); |
_ulong = flags&SHORTINT ? (long)(short)_d : (long)_d; |
} |
if ((long)_ulong < 0) { |
_ulong = -_ulong; |
sign = '-'; |
} |
base = DEC; |
goto number; |
} else |
/* |
if (ch=='n') { |
if (flags & LONGINT) |
*va_arg(ap, long *) = ret; |
else if (flags & SHORTINT) |
*va_arg(ap, short *) = ret; |
else |
*va_arg(ap, int *) = ret; |
continue; // no output |
} else |
*/ |
#ifndef LIGHTPRINTF |
if (ch=='O'||ch=='o') { |
if (ch=='O') |
flags |= LONGINT; |
base = OCT; |
goto nosign; |
} else if (ch=='p') { |
/* |
* ``The argument shall be a pointer to void. The |
* value of the pointer is converted to a sequence |
* of printable characters, in an implementation- |
* defined manner.'' |
* -- ANSI X3J11 |
*/ |
/* NOSTRICT */ |
_ulong = (unsigned int)va_arg(ap, void *); |
base = HEX; |
flags |= HEXPREFIX; |
ch = 'x'; |
goto nosign; |
} else if (ch=='s') { // print a string from RAM |
if ((cp = va_arg(ap, char *)) == NULL) { |
cp=buf; |
cp[0] = '('; |
cp[1] = 'n'; |
cp[2] = 'u'; |
cp[4] = cp[3] = 'l'; |
cp[5] = ')'; |
cp[6] = '\0'; |
} |
if (prec >= 0) { |
/* |
* can't use strlen; can only look for the |
* NUL in the first `prec' characters, and |
* strlen() will go further. |
*/ |
char *p = (char*)memchr(cp, 0, prec); |
if (p != NULL) { |
size = p - cp; |
if (size > prec) |
size = prec; |
} else |
size = prec; |
} else |
size = strlen(cp); |
sign = '\0'; |
} else |
#endif /* LIGHTPRINTF */ |
if(ch=='U'||ch=='u') { |
if (ch=='U') |
flags |= LONGINT; |
base = DEC; |
goto nosign; |
} else if (ch=='X'||ch=='x') { |
base = HEX; |
/* leading 0x/X only if non-zero */ |
if (flags & ALT && _ulong != 0) |
flags |= HEXPREFIX; |
/* unsigned conversions */ |
nosign: sign = '\0'; |
/* |
* ``... diouXx conversions ... if a precision is |
* specified, the 0 flag will be ignored.'' |
* -- ANSI X3J11 |
*/ |
number: if ((dprec = prec) >= 0) |
flags &= ~ZEROPAD; |
/* |
* ``The result of converting a zero value with an |
* explicit precision of zero is no characters.'' |
* -- ANSI X3J11 |
*/ |
cp = buf + BUF; |
if (_ulong != 0 || prec != 0) { |
register unsigned char _d,notlastdigit; |
do { |
notlastdigit=(_ulong>=base); |
_d = _ulong % base; |
if (_d<10) { |
_d+='0'; |
} else { |
_d+='a'-10; |
if (ch=='X') _d&=~0x20; |
} |
*--cp=_d; |
_ulong /= base; |
} while (notlastdigit); |
#ifndef LIGHTPRINTF |
// handle octal leading 0 |
if (base==OCT && flags & ALT && *cp != '0') |
*--cp = '0'; |
#endif |
} |
size = buf + BUF - cp; |
} else { //default |
/* "%?" prints ?, unless ? is NUL */ |
if (ch == '\0') |
goto done; |
/* pretend it was %c with argument ch */ |
cp = buf; |
*cp = ch; |
size = 1; |
sign = '\0'; |
} |
/* |
* All reasonable formats wind up here. At this point, |
* `cp' points to a string which (if not flags&LADJUST) |
* should be padded out to `width' places. If |
* flags&ZEROPAD, it should first be prefixed by any |
* sign or other prefix; otherwise, it should be blank |
* padded before the prefix is emitted. After any |
* left-hand padding and prefixing, emit zeroes |
* required by a decimal [diouxX] precision, then print |
* the string proper, then emit zeroes required by any |
* leftover floating precision; finally, if LADJUST, |
* pad with blanks. |
*/ |
/* |
* compute actual size, so we know how much to pad. |
*/ |
fieldsz = size; |
dpad = dprec - size; |
if (dpad < 0) |
dpad = 0; |
if (sign) |
fieldsz++; |
else if (flags & HEXPREFIX) |
fieldsz += 2; |
fieldsz += dpad; |
/* right-adjusting blank padding */ |
if ((flags & (LADJUST|ZEROPAD)) == 0) |
PAD_SP(width - fieldsz); |
/* prefix */ |
if (sign) { |
PRINT(&sign, 1); |
} else if (flags & HEXPREFIX) { |
ox[0] = '0'; |
ox[1] = ch; |
PRINT(ox, 2); |
} |
/* right-adjusting zero padding */ |
if ((flags & (LADJUST|ZEROPAD)) == ZEROPAD) |
PAD_0(width - fieldsz); |
/* leading zeroes from decimal precision */ |
PAD_0(dpad); |
/* the string or number proper */ |
PRINT(cp, size); |
/* left-adjusting padding (always blank) */ |
if (flags & LADJUST) |
PAD_SP(width - fieldsz); |
} |
done: |
va_end(ap); |
} |
/branches/v0.60_MicroMag3_Nick666/V0.67g/printf_P.h |
---|
0,0 → 1,19 |
#ifndef _PRINTF_P_H_ |
#define _PRINTF_P_H_ |
#include <avr/pgmspace.h> |
#define OUT_V24 0 |
#define OUT_LCD 1 |
void _printf_P (char, char const *fmt0, ...); |
extern char PrintZiel; |
#define printf_P(format, args...) _printf_P(OUT_V24,format , ## args) |
#define printf(format, args...) _printf_P(OUT_V24,PSTR(format) , ## args) |
#define LCD_printfxy(x,y,format, args...) { DispPtr = y * 20 + x; _printf_P(OUT_LCD,PSTR(format) , ## args);} |
#define LCD_printf(format, args...) { _printf_P(OUT_LCD,PSTR(format) , ## args);} |
#endif |
/branches/v0.60_MicroMag3_Nick666/V0.67g/rc.c |
---|
0,0 → 1,84 |
/*####################################################################################### |
Decodieren eines RC Summen Signals |
#######################################################################################*/ |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Copyright (c) 04.2007 Holger Buss |
// + only for non-profit use |
// + www.MikroKopter.com |
// + see the File "License.txt" for further Informations |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
#include "rc.h" |
#include "main.h" |
volatile int PPM_in[11]; |
volatile int PPM_diff[11]; // das diffenzierte Stick-Signal |
volatile unsigned char NewPpmData = 1; |
//############################################################################ |
//zum decodieren des PPM-Signals wird Timer1 mit seiner Input |
//Capture Funktion benutzt: |
void rc_sum_init (void) |
//############################################################################ |
{ |
TCCR1B=(1<<CS11)|(1<<CS10)|(1<<ICES1)|(1<<ICNC1);//|(1 << WGM12); //timer1 prescale 64 |
// PWM |
//TCCR1A = (1 << COM1B1) | (1 << WGM11) | (1 << WGM10); |
//TCCR1B |= (1 << WGM12); |
//OCR1B = 55; |
TIMSK1 |= _BV(ICIE1); |
AdNeutralGier = 0; |
AdNeutralRoll = 0; |
AdNeutralNick = 0; |
return; |
} |
//############################################################################ |
//Diese Routine startet und inizialisiert den Timer für RC |
SIGNAL(SIG_INPUT_CAPTURE1) |
//############################################################################ |
{ |
static unsigned int AltICR=0; |
signed int signal = 0,tmp; |
static int index; |
signal = (unsigned int) ICR1 - AltICR; |
AltICR = ICR1; |
//Syncronisationspause? |
// if((signal > (int) Parameter_UserParam2 * 10) && (signal < 8000)) |
if((signal > 1100) && (signal < 8000)) |
{ |
if(index >= 4) NewPpmData = 0; // Null bedeutet: Neue Daten |
index = 1; |
} |
else |
{ |
if(index < 10) |
{ |
if((signal > 250) && (signal < 687)) |
{ |
signal -= 466; |
// Stabiles Signal |
if(abs(signal - PPM_in[index]) < 6) { if(SenderOkay < 200) SenderOkay += 10;} |
tmp = (3 * (PPM_in[index]) + signal) / 4; |
// if(tmp > signal+1) tmp--; else |
// if(tmp < signal-1) tmp++; |
PPM_diff[index] = tmp - PPM_in[index]; |
PPM_in[index] = tmp; |
} |
index++; |
if(index == 5) PORTD |= 0x20; else PORTD &= ~0x20; // Servosignal an J3 anlegen |
if(index == 6) PORTD |= 0x10; else PORTD &= ~0x10; // Servosignal an J4 anlegen |
//if(index == 7) PORTD |= 0x08; else PORTD &= ~0x08; // Servosignal an J5 anlegen |
} |
} |
} |
/branches/v0.60_MicroMag3_Nick666/V0.67g/rc.h |
---|
0,0 → 1,29 |
/*####################################################################################### |
Derkodieren eines RC Summen Signals |
#######################################################################################*/ |
#ifndef _RC_H |
#define _RC_H |
#if defined (__AVR_ATmega32__) |
#define TIMER_TEILER CK64 |
#define TIMER_RELOAD_VALUE 250 |
#endif |
#if defined (__AVR_ATmega644__) |
//#define TIMER_TEILER CK64 |
#define TIMER_RELOAD_VALUE 250 |
//#define TIMER_TEILER CK256 // bei 20MHz |
//#define TIMER_RELOAD_VALUE -78 // bei 20MHz |
#endif |
#define GAS PPM_in[2] |
extern void rc_sum_init (void); |
extern volatile int PPM_in[11]; |
extern volatile int PPM_diff[11]; // das diffenzierte Stick-Signal |
extern volatile unsigned char NewPpmData; |
#endif //_RC_H |
/branches/v0.60_MicroMag3_Nick666/V0.67g/timer0.c |
---|
0,0 → 1,145 |
#include "main.h" |
volatile unsigned int CountMilliseconds = 0; |
volatile unsigned char UpdateMotor = 0; |
volatile unsigned int beeptime = 0; |
unsigned int BeepMuster = 0xffff; |
int ServoValue = 0; |
enum { |
STOP = 0, |
CK = 1, |
CK8 = 2, |
CK64 = 3, |
CK256 = 4, |
CK1024 = 5, |
T0_FALLING_EDGE = 6, |
T0_RISING_EDGE = 7 |
}; |
SIGNAL (SIG_OVERFLOW0) // 9,8kHz |
{ |
static unsigned char cnt_1ms = 1,cnt = 0; |
unsigned char pieper_ein = 0; |
// TCNT0 -= 250;//TIMER_RELOAD_VALUE; |
if(!cnt--) |
{ |
cnt = 10; |
cnt_1ms++; |
cnt_1ms %= 2; |
if(!cnt_1ms) UpdateMotor = 1; |
CountMilliseconds++; |
} |
if(beeptime > 1) |
{ |
beeptime--; |
if(beeptime & BeepMuster) |
{ |
pieper_ein = 1; |
} |
else pieper_ein = 0; |
} |
else |
{ |
pieper_ein = 0; |
BeepMuster = 0xffff; |
} |
if(pieper_ein) |
{ |
if(PlatinenVersion == 10) PORTD |= (1<<2); // Speaker an PORTD.2 |
else PORTC |= (1<<7); // Speaker an PORTC.7 |
} |
else |
{ |
if(PlatinenVersion == 10) PORTD &= ~(1<<2); |
else PORTC &= ~(1<<7); |
} |
if(EE_Parameter.GlobalConfig & CFG_KOMPASS_AKTIV) timer0_MM3(); // Kompass auslesen |
} |
void Timer_Init(void) |
{ |
TCCR0B = CK8; |
TCCR0A = (1<<COM0A1)|(1<<COM0B1)|3;//fast PWM |
OCR0A = 0; |
OCR0B = 120; |
TCNT0 = (unsigned char)-TIMER_RELOAD_VALUE; // reload |
//OCR1 = 0x00; |
TCCR2A=(1<<COM2A1)|(1<<COM2A0)|3; |
TCCR2B=(0<<CS20)|(1<<CS21)|(1<<CS22); |
// TIMSK2 |= _BV(TOIE2); |
TIMSK2 |= _BV(OCIE2A); |
TIMSK0 |= _BV(TOIE0); |
OCR2A = 10; |
TCNT2 = 0; |
} |
// ----------------------------------------------------------------------- |
unsigned int SetDelay (unsigned int t) |
{ |
// TIMSK0 &= ~_BV(TOIE0); |
return(CountMilliseconds + t + 1); |
// TIMSK0 |= _BV(TOIE0); |
} |
// ----------------------------------------------------------------------- |
char CheckDelay(unsigned int t) |
{ |
// TIMSK0 &= ~_BV(TOIE0); |
return(((t - CountMilliseconds) & 0x8000) >> 9); |
// TIMSK0 |= _BV(TOIE0); |
} |
// ----------------------------------------------------------------------- |
void Delay_ms(unsigned int w) |
{ |
unsigned int akt; |
akt = SetDelay(w); |
while (!CheckDelay(akt)); |
} |
void Delay_ms_Mess(unsigned int w) |
{ |
unsigned int akt; |
akt = SetDelay(w); |
while (!CheckDelay(akt)) ANALOG_ON; |
} |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Servo ansteuern |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
SIGNAL(SIG_OUTPUT_COMPARE2A) |
{ |
static unsigned char timer = 10; |
if(!timer--) |
{ |
TCCR2A=(1<<COM2A1)|(0<<COM2A0)|3; |
ServoValue = Parameter_ServoNickControl; |
if(EE_Parameter.ServoNickCompInvert & 0x01) ServoValue += ((long) EE_Parameter.ServoNickComp * (IntegralNick / 128)) / 512; |
else ServoValue -= ((long) EE_Parameter.ServoNickComp * (IntegralNick / 128)) / 512; |
if(ServoValue < EE_Parameter.ServoNickMin) ServoValue = EE_Parameter.ServoNickMin; |
else if(ServoValue > EE_Parameter.ServoNickMax) ServoValue = EE_Parameter.ServoNickMax; |
OCR2A = ServoValue;// + 75; |
timer = EE_Parameter.ServoNickRefresh; |
} |
else |
{ |
TCCR2A =3; |
PORTD&=~0x80; |
} |
} |
/branches/v0.60_MicroMag3_Nick666/V0.67g/timer0.h |
---|
0,0 → 1,15 |
#define TIMER_TEILER CK8 |
#define TIMER_RELOAD_VALUE 250 |
void Timer_Init(void); |
void Delay_ms(unsigned int); |
void Delay_ms_Mess(unsigned int); |
unsigned int SetDelay (unsigned int t); |
char CheckDelay (unsigned int t); |
extern volatile unsigned int CountMilliseconds; |
extern volatile unsigned char UpdateMotor; |
extern volatile unsigned int beeptime; |
extern int ServoValue; |
extern unsigned int BeepMuster; |
/branches/v0.60_MicroMag3_Nick666/V0.67g/twimaster.c |
---|
0,0 → 1,152 |
/*############################################################################ |
############################################################################*/ |
#include "main.h" |
unsigned char twi_state = 0; |
unsigned char motor = 0; |
unsigned char motorread = 0; |
unsigned char motor_rx[8]; |
//############################################################################ |
//Initzialisieren der I2C (TWI) Schnittstelle |
void i2c_init(void) |
//############################################################################ |
{ |
TWSR = 0; |
TWBR = ((SYSCLK/SCL_CLOCK)-16)/2; |
} |
//############################################################################ |
//Start I2C |
char i2c_start(void) |
//############################################################################ |
{ |
TWCR = (1<<TWSTA) | (1<<TWEN) | (1<<TWINT) | (1<<TWIE); |
return(0); |
} |
//############################################################################ |
//Start I2C |
void i2c_stop(void) |
//############################################################################ |
{ |
TWCR = (1<<TWEN) | (1<<TWSTO) | (1<<TWINT); |
} |
void i2c_reset(void) |
//############################################################################ |
{ |
i2c_stop(); |
twi_state = 0; |
motor = TWDR; |
motor = 0; |
TWCR = 0x80; |
TWAMR = 0; |
TWAR = 0; |
TWDR = 0; |
TWSR = 0; |
TWBR = 0; |
i2c_init(); |
i2c_start(); |
i2c_write_byte(0); |
} |
//############################################################################ |
//Start I2C |
char i2c_write_byte(char byte) |
//############################################################################ |
{ |
TWSR = 0x00; |
TWDR = byte; |
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWIE); |
return(0); |
} |
//############################################################################ |
//Start I2C |
SIGNAL (TWI_vect) |
//############################################################################ |
{ |
switch (twi_state++) |
{ |
case 0: |
i2c_write_byte(0x52+(motor*2)); |
break; |
case 1: |
switch(motor++) |
{ |
case 0: |
i2c_write_byte(Motor_Vorne); |
break; |
case 1: |
i2c_write_byte(Motor_Hinten); |
break; |
case 2: |
i2c_write_byte(Motor_Rechts); |
break; |
case 3: |
i2c_write_byte(Motor_Links); |
break; |
} |
break; |
case 2: |
i2c_stop(); |
if (motor<4) twi_state = 0; |
else motor = 0; |
i2c_start(); |
break; |
//Liest Daten von Motor |
case 3: |
i2c_write_byte(0x53+(motorread*2)); |
break; |
case 4: |
switch(motorread) |
{ |
case 0: |
i2c_write_byte(Motor_Vorne); |
break; |
case 1: |
i2c_write_byte(Motor_Hinten); |
break; |
case 2: |
i2c_write_byte(Motor_Rechts); |
break; |
case 3: |
i2c_write_byte(Motor_Links); |
break; |
} |
break; |
case 5: //1 Byte vom Motor lesen |
motor_rx[motorread] = TWDR; |
case 6: |
switch(motorread) |
{ |
case 0: |
i2c_write_byte(Motor_Vorne); |
break; |
case 1: |
i2c_write_byte(Motor_Hinten); |
break; |
case 2: |
i2c_write_byte(Motor_Rechts); |
break; |
case 3: |
i2c_write_byte(Motor_Links); |
break; |
} |
break; |
case 7: //2 Byte vom Motor lesen |
motor_rx[motorread+4] = TWDR; |
motorread++; |
if (motorread>3) motorread=0; |
i2c_stop(); |
I2CTimeout = 10; |
twi_state = 0; |
} |
TWCR |= 0x80; |
} |
/branches/v0.60_MicroMag3_Nick666/V0.67g/twimaster.h |
---|
0,0 → 1,33 |
/*############################################################################ |
############################################################################*/ |
#ifndef _I2C_MASTER_H |
#define _I2C_MASTER_H |
//############################################################################ |
// I2C Konstanten |
#define SCL_CLOCK 200000L |
#define I2C_TIMEOUT 30000 |
#define I2C_START 0x08 |
#define I2C_REPEATED_START 0x10 |
#define I2C_TX_SLA_ACK 0x18 |
#define I2C_TX_DATA_ACK 0x28 |
#define I2C_RX_SLA_ACK 0x40 |
#define I2C_RX_DATA_ACK 0x50 |
//############################################################################ |
extern unsigned char twi_state; |
extern unsigned char motor; |
extern unsigned char motorread; |
extern unsigned char motor_rx[8]; |
void i2c_reset(void); |
extern void i2c_init (void); // I2C initialisieren |
extern char i2c_start (void); // Start I2C |
extern void i2c_stop (void); // Stop I2C |
extern char i2c_write_byte (char byte); // 1 Byte schreiben |
extern void i2c_reset(void); |
#endif |
/branches/v0.60_MicroMag3_Nick666/V0.67g/uart.c |
---|
0,0 → 1,388 |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Copyright (c) 04.2007 Holger Buss |
// + only for non-profit use |
// + www.MikroKopter.com |
// + see the File "License.txt" for further Informations |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
#include "main.h" |
#include "uart.h" |
unsigned char DebugGetAnforderung = 0,DebugDisplayAnforderung = 0,DebugDataAnforderung = 0,GetVersionAnforderung = 0; |
unsigned volatile char SioTmp = 0; |
unsigned volatile char SendeBuffer[MAX_SENDE_BUFF]; |
unsigned volatile char RxdBuffer[MAX_EMPFANGS_BUFF]; |
unsigned volatile char NMEABuffer[MAX_EMPFANGS_BUFF]; |
unsigned volatile char NeuerDatensatzEmpfangen = 0; |
unsigned volatile char NeueKoordinateEmpfangen = 0; |
unsigned volatile char UebertragungAbgeschlossen = 1; |
unsigned volatile char CntCrcError = 0; |
unsigned volatile char AnzahlEmpfangsBytes = 0; |
unsigned volatile char PC_DebugTimeout = 0; |
unsigned char RemotePollDisplayLine = 0; |
unsigned char NurKanalAnforderung = 0; |
unsigned char DebugTextAnforderung = 255; |
unsigned char PcZugriff = 100; |
unsigned char MotorTest[4] = {0,0,0,0}; |
unsigned char DubWiseKeys[3] = {0,0,0}; |
unsigned char MeineSlaveAdresse; |
struct str_DebugOut DebugOut; |
struct str_Debug DebugIn; |
struct str_VersionInfo VersionInfo; |
int Debug_Timer; |
const unsigned char ANALOG_TEXT[32][16] = |
{ |
//1234567890123456 |
"IntegralNick ", //0 |
"IntegralRoll ", |
"AccNick ", |
"AccRoll ", |
"GyroGier ", |
"HoehenWert ", //5 |
"AccZ ", |
"Gas ", |
"KompassValue ", |
"Spannung ", |
"Empfang ", //10 |
"Analog11 ", |
"Motor_Vorne ", |
"Motor_Hinten ", |
"Motor_Links ", |
"Motor_Rechts ", //15 |
"Acc_Z ", |
"MittelAccNick ", |
"MittelAccRoll ", |
"IntegralErrNick ", |
"IntegralErrRoll ", //20 |
"MittelIntNick ", |
"MittelIntRoll ", |
"NeutralNick ", |
"RollOffset ", |
"IntRoll*Faktor ", //25 |
"Analog26 ", |
"DirektAusglRoll ", |
"MesswertRoll ", |
"AusgleichRoll ", |
"I-LageRoll ", //30 |
"StickRoll " |
}; |
//+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
//++ Sende-Part der Datenübertragung |
//+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
SIGNAL(INT_VEC_TX) |
{ |
static unsigned int ptr = 0; |
unsigned char tmp_tx; |
if(!UebertragungAbgeschlossen) |
{ |
ptr++; // die [0] wurde schon gesendet |
tmp_tx = SendeBuffer[ptr]; |
if((tmp_tx == '\r') || (ptr == MAX_SENDE_BUFF)) |
{ |
ptr = 0; |
UebertragungAbgeschlossen = 1; |
} |
UDR = tmp_tx; |
} |
else ptr = 0; |
} |
//+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
//++ Empfangs-Part der Datenübertragung, incl. CRC-Auswertung |
//+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
SIGNAL(INT_VEC_RX) |
{ |
static unsigned int crc; |
static unsigned char crc1,crc2,buf_ptr; |
static unsigned char UartState = 0; |
unsigned char CrcOkay = 0; |
SioTmp = UDR; |
if(buf_ptr >= MAX_EMPFANGS_BUFF) UartState = 0; |
if(SioTmp == '\r' && UartState == 2) |
{ |
UartState = 0; |
crc -= RxdBuffer[buf_ptr-2]; |
crc -= RxdBuffer[buf_ptr-1]; |
crc %= 4096; |
crc1 = '=' + crc / 64; |
crc2 = '=' + crc % 64; |
CrcOkay = 0; |
if((crc1 == RxdBuffer[buf_ptr-2]) && (crc2 == RxdBuffer[buf_ptr-1])) CrcOkay = 1; else { CrcOkay = 0; CntCrcError++;}; |
if(!NeuerDatensatzEmpfangen && CrcOkay) // Datensatz schon verarbeitet |
{ |
NeuerDatensatzEmpfangen = 1; |
AnzahlEmpfangsBytes = buf_ptr; |
RxdBuffer[buf_ptr] = '\r'; |
if(RxdBuffer[2] == 'R') wdt_enable(WDTO_250MS); // Reset-Commando |
} |
} |
else |
switch(UartState) |
{ |
case 0: |
if(SioTmp == '#' && !NeuerDatensatzEmpfangen) UartState = 1; // Startzeichen und Daten schon verarbeitet |
buf_ptr = 0; |
RxdBuffer[buf_ptr++] = SioTmp; |
crc = SioTmp; |
break; |
case 1: // Adresse auswerten |
UartState++; |
RxdBuffer[buf_ptr++] = SioTmp; |
crc += SioTmp; |
break; |
case 2: // Eingangsdaten sammeln |
RxdBuffer[buf_ptr] = SioTmp; |
if(buf_ptr < MAX_EMPFANGS_BUFF) buf_ptr++; |
else UartState = 0; |
crc += SioTmp; |
break; |
default: |
UartState = 0; |
break; |
} |
} |
// -------------------------------------------------------------------------- |
void AddCRC(unsigned int wieviele) |
{ |
unsigned int tmpCRC = 0,i; |
for(i = 0; i < wieviele;i++) |
{ |
tmpCRC += SendeBuffer[i]; |
} |
tmpCRC %= 4096; |
SendeBuffer[i++] = '=' + tmpCRC / 64; |
SendeBuffer[i++] = '=' + tmpCRC % 64; |
SendeBuffer[i++] = '\r'; |
UebertragungAbgeschlossen = 0; |
UDR = SendeBuffer[0]; |
} |
// -------------------------------------------------------------------------- |
void SendOutData(unsigned char cmd,unsigned char modul, unsigned char *snd, unsigned char len) |
{ |
unsigned int pt = 0; |
unsigned char a,b,c; |
unsigned char ptr = 0; |
SendeBuffer[pt++] = '#'; // Startzeichen |
SendeBuffer[pt++] = modul; // Adresse (a=0; b=1,...) |
SendeBuffer[pt++] = cmd; // Commando |
while(len) |
{ |
if(len) { a = snd[ptr++]; len--;} else a = 0; |
if(len) { b = snd[ptr++]; len--;} else b = 0; |
if(len) { c = snd[ptr++]; len--;} else c = 0; |
SendeBuffer[pt++] = '=' + (a >> 2); |
SendeBuffer[pt++] = '=' + (((a & 0x03) << 4) | ((b & 0xf0) >> 4)); |
SendeBuffer[pt++] = '=' + (((b & 0x0f) << 2) | ((c & 0xc0) >> 6)); |
SendeBuffer[pt++] = '=' + ( c & 0x3f); |
} |
AddCRC(pt); |
} |
// -------------------------------------------------------------------------- |
void Decode64(unsigned char *ptrOut, unsigned char len, unsigned char ptrIn,unsigned char max) // Wohin mit den Daten; Wie lang; Wo im RxdBuffer |
{ |
unsigned char a,b,c,d; |
unsigned char ptr = 0; |
unsigned char x,y,z; |
while(len) |
{ |
a = RxdBuffer[ptrIn++] - '='; |
b = RxdBuffer[ptrIn++] - '='; |
c = RxdBuffer[ptrIn++] - '='; |
d = RxdBuffer[ptrIn++] - '='; |
if(ptrIn > max - 2) break; // nicht mehr Daten verarbeiten, als empfangen wurden |
x = (a << 2) | (b >> 4); |
y = ((b & 0x0f) << 4) | (c >> 2); |
z = ((c & 0x03) << 6) | d; |
if(len--) ptrOut[ptr++] = x; else break; |
if(len--) ptrOut[ptr++] = y; else break; |
if(len--) ptrOut[ptr++] = z; else break; |
} |
} |
// -------------------------------------------------------------------------- |
void BearbeiteRxDaten(void) |
{ |
if(!NeuerDatensatzEmpfangen) return; |
// unsigned int tmp_int_arr1[1]; |
// unsigned int tmp_int_arr2[2]; |
// unsigned int tmp_int_arr3[3]; |
unsigned char tmp_char_arr2[2]; |
// unsigned char tmp_char_arr3[3]; |
// unsigned char tmp_char_arr4[4]; |
//if(!MotorenEin) |
PcZugriff = 255; |
switch(RxdBuffer[2]) |
{ |
case 'a':// Texte der Analogwerte |
Decode64((unsigned char *) &tmp_char_arr2[0],sizeof(tmp_char_arr2),3,AnzahlEmpfangsBytes); |
DebugTextAnforderung = tmp_char_arr2[0]; |
break; |
case 'c':// Debugdaten incl. Externe IOs usw |
Decode64((unsigned char *) &DebugIn,sizeof(DebugIn),3,AnzahlEmpfangsBytes); |
/* for(unsigned char i=0; i<4;i++) |
{ |
EE_CheckAndWrite(&EE_Buffer[EE_DEBUGWERTE + i*2], DebugIn.Analog[i]); |
EE_CheckAndWrite(&EE_Buffer[EE_DEBUGWERTE + i*2 + 1], DebugIn.Analog[i] >> 8); |
}*/ |
RemoteTasten |= DebugIn.RemoteTasten; |
DebugDataAnforderung = 1; |
break; |
case 'h':// x-1 Displayzeilen |
Decode64((unsigned char *) &tmp_char_arr2[0],sizeof(tmp_char_arr2),3,AnzahlEmpfangsBytes); |
RemoteTasten |= tmp_char_arr2[0]; |
if(tmp_char_arr2[1] == 255) NurKanalAnforderung = 1; else NurKanalAnforderung = 0; // keine Displaydaten |
DebugDisplayAnforderung = 1; |
break; |
case 't':// Motortest |
Decode64((unsigned char *) &MotorTest[0],sizeof(MotorTest),3,AnzahlEmpfangsBytes); |
break; |
case 'k':// Keys von DubWise |
Decode64((unsigned char *) &DubWiseKeys[0],sizeof(DubWiseKeys),3,AnzahlEmpfangsBytes); |
break; |
case 'v': // Version-Anforderung und Ausbaustufe |
GetVersionAnforderung = 1; |
break; |
case 'g':// "Get"-Anforderung für Debug-Daten |
// Bei Get werden die vom PC einstellbaren Werte vom PC zurückgelesen |
DebugGetAnforderung = 1; |
break; |
case 'q':// "Get"-Anforderung für Settings |
// Bei Get werden die vom PC einstellbaren Werte vom PC zurückgelesen |
Decode64((unsigned char *) &tmp_char_arr2[0],sizeof(tmp_char_arr2),3,AnzahlEmpfangsBytes); |
if(tmp_char_arr2[0] != 0xff) |
{ |
if(tmp_char_arr2[0] > 5) tmp_char_arr2[0] = 5; |
ReadParameterSet(tmp_char_arr2[0], (unsigned char *) &EE_Parameter.Kanalbelegung[0], sizeof(struct mk_param_struct)); |
SendOutData('L' + tmp_char_arr2[0] -1,MeineSlaveAdresse,(unsigned char *) &EE_Parameter.Kanalbelegung[0],sizeof(struct mk_param_struct)); |
} |
else |
SendOutData('L' + GetActiveParamSetNumber()-1,MeineSlaveAdresse,(unsigned char *) &EE_Parameter.Kanalbelegung[0],sizeof(struct mk_param_struct)); |
break; |
case 'l': |
case 'm': |
case 'n': |
case 'o': |
case 'p': // Parametersatz speichern |
Decode64((unsigned char *) &EE_Parameter.Kanalbelegung[0],sizeof(struct mk_param_struct),3,AnzahlEmpfangsBytes); |
WriteParameterSet(RxdBuffer[2] - 'l' + 1, (unsigned char *) &EE_Parameter.Kanalbelegung[0], sizeof(struct mk_param_struct)); |
eeprom_write_byte(&EEPromArray[EEPROM_ADR_ACTIVE_SET], RxdBuffer[2] - 'l' + 1); // aktiven Datensatz merken |
Umschlag180Nick = (long) EE_Parameter.WinkelUmschlagNick * 2500L; |
Umschlag180Roll = (long) EE_Parameter.WinkelUmschlagRoll * 2500L; |
Piep(GetActiveParamSetNumber()); |
break; |
} |
// DebugOut.AnzahlZyklen = Debug_Timer_Intervall; |
NeuerDatensatzEmpfangen = 0; |
} |
//############################################################################ |
//Routine für die Serielle Ausgabe |
int uart_putchar (char c) |
//############################################################################ |
{ |
if (c == '\n') |
uart_putchar('\r'); |
//Warten solange bis Zeichen gesendet wurde |
loop_until_bit_is_set(USR, UDRE); |
//Ausgabe des Zeichens |
UDR = c; |
return (0); |
} |
// -------------------------------------------------------------------------- |
void WriteProgramData(unsigned int pos, unsigned char wert) |
{ |
//if (ProgramLocation == IN_RAM) Buffer[pos] = wert; |
// else eeprom_write_byte(&EE_Buffer[pos], wert); |
// Buffer[pos] = wert; |
} |
//############################################################################ |
//INstallation der Seriellen Schnittstelle |
void UART_Init (void) |
//############################################################################ |
{ |
//Enable TXEN im Register UCR TX-Data Enable & RX Enable |
UCR=(1 << TXEN) | (1 << RXEN); |
// UART Double Speed (U2X) |
USR |= (1<<U2X); |
// RX-Interrupt Freigabe |
UCSRB |= (1<<RXCIE); |
// TX-Interrupt Freigabe |
UCSRB |= (1<<TXCIE); |
//Teiler wird gesetzt |
UBRR=(SYSCLK / (BAUD_RATE * 8L) - 1); |
//UBRR = 33; |
//öffnet einen Kanal für printf (STDOUT) |
//fdevopen (uart_putchar, 0); |
//sbi(PORTD,4); |
Debug_Timer = SetDelay(200); |
} |
//--------------------------------------------------------------------------------------------- |
void DatenUebertragung(void) |
{ |
if(!UebertragungAbgeschlossen) return; |
if(DebugGetAnforderung && UebertragungAbgeschlossen) // Bei Get werden die vom PC einstellbaren Werte vom PC zurückgelesen |
{ |
SendOutData('G',MeineSlaveAdresse,(unsigned char *) &DebugIn,sizeof(DebugIn)); |
DebugGetAnforderung = 0; |
} |
if((CheckDelay(Debug_Timer) || DebugDataAnforderung) && UebertragungAbgeschlossen) |
{ |
SendOutData('D',MeineSlaveAdresse,(unsigned char *) &DebugOut,sizeof(DebugOut)); |
DebugDataAnforderung = 0; |
Debug_Timer = SetDelay(MIN_DEBUG_INTERVALL); |
} |
if(DebugTextAnforderung != 255) // Texte für die Analogdaten |
{ |
SendOutData('A',DebugTextAnforderung + '0',(unsigned char *) ANALOG_TEXT[DebugTextAnforderung],16); |
DebugTextAnforderung = 255; |
} |
if(DebugDisplayAnforderung && UebertragungAbgeschlossen) |
{ |
Menu(); |
DebugDisplayAnforderung = 0; |
if(++RemotePollDisplayLine == 4 || NurKanalAnforderung) |
{ |
SendOutData('4',0,(unsigned char *)&PPM_in,sizeof(PPM_in)); // DisplayZeile übertragen |
RemotePollDisplayLine = -1; |
} |
else SendOutData('0' + RemotePollDisplayLine,0,(unsigned char *)&DisplayBuff[20 * RemotePollDisplayLine],20); // DisplayZeile übertragen |
} |
if(GetVersionAnforderung && UebertragungAbgeschlossen) |
{ |
SendOutData('V',MeineSlaveAdresse,(unsigned char *) &VersionInfo,sizeof(VersionInfo)); |
GetVersionAnforderung = 0; |
} |
} |
/branches/v0.60_MicroMag3_Nick666/V0.67g/uart.h |
---|
0,0 → 1,100 |
#ifndef _UART_H |
#define _UART_H |
#define MAX_SENDE_BUFF 150 |
#define MAX_EMPFANGS_BUFF 150 |
#define DUB_KEY_UP 4 |
#define DUB_KEY_DOWN 8 |
#define DUB_KEY_RIGHT 32 |
#define DUB_KEY_LEFT 16 |
#define DUB_KEY_FIRE 64 |
void BearbeiteRxDaten(void); |
extern unsigned char DebugGetAnforderung; |
extern unsigned volatile char SendeBuffer[MAX_SENDE_BUFF]; |
extern unsigned volatile char RxdBuffer[MAX_EMPFANGS_BUFF]; |
extern unsigned volatile char UebertragungAbgeschlossen; |
extern unsigned volatile char PC_DebugTimeout; |
extern unsigned volatile char NeueKoordinateEmpfangen; |
extern unsigned char MeineSlaveAdresse; |
extern unsigned char PcZugriff; |
extern unsigned char RemotePollDisplayLine; |
extern int Debug_Timer; |
extern void UART_Init (void); |
extern int uart_putchar (char c); |
extern void boot_program_page (uint32_t page, uint8_t *buf); |
extern void DatenUebertragung(void); |
extern void DecodeNMEA(void); |
extern void BearbeiteRxDaten(void); |
extern unsigned char MotorTest[4]; |
extern unsigned char DubWiseKeys[3]; |
struct str_DebugOut |
{ |
unsigned char Digital[2]; |
unsigned int Analog[32]; // Debugwerte |
}; |
extern struct str_DebugOut DebugOut; |
struct str_Debug |
{ |
unsigned char Digital[2]; |
unsigned char RemoteTasten; |
unsigned int Analog[4]; |
}; |
extern struct str_Debug DebugIn; |
struct str_VersionInfo |
{ |
unsigned char Hauptversion; |
unsigned char Nebenversion; |
unsigned char PCKompatibel; |
unsigned char Rserved[7]; |
}; |
extern struct str_VersionInfo VersionInfo; |
//Die Baud_Rate der Seriellen Schnittstelle ist 9600 Baud |
//#define BAUD_RATE 9600 //Baud Rate für die Serielle Schnittstelle |
//#define BAUD_RATE 14400 //Baud Rate für die Serielle Schnittstelle |
//#define BAUD_RATE 28800 //Baud Rate für die Serielle Schnittstelle |
//#define BAUD_RATE 38400 //Baud Rate für die Serielle Schnittstelle |
#define BAUD_RATE 57600 //Baud Rate für die Serielle Schnittstelle |
//Anpassen der seriellen Schnittstellen Register wenn ein ATMega128 benutzt wird |
#if defined (__AVR_ATmega128__) |
# define USR UCSR0A |
# define UCR UCSR0B |
# define UDR UDR0 |
# define UBRR UBRR0L |
# define EICR EICRB |
#endif |
#if defined (__AVR_ATmega32__) |
# define USR UCSRA |
# define UCR UCSRB |
# define UBRR UBRRL |
# define EICR EICRB |
# define INT_VEC_RX SIG_UART_RECV |
# define INT_VEC_TX SIG_UART_TRANS |
#endif |
#if defined (__AVR_ATmega644__) |
# define USR UCSR0A |
# define UCR UCSR0B |
# define UDR UDR0 |
# define UBRR UBRR0L |
# define EICR EICR0B |
# define TXEN TXEN0 |
# define RXEN RXEN0 |
# define RXCIE RXCIE0 |
# define TXCIE TXCIE0 |
# define U2X U2X0 |
# define UCSRB UCSR0B |
# define UDRE UDRE0 |
# define INT_VEC_RX SIG_USART_RECV |
# define INT_VEC_TX SIG_USART_TRANS |
#endif |
#endif //_UART_H |
/branches/v0.60_MicroMag3_Nick666/V0.67g/version.txt |
---|
0,0 → 1,107 |
------- |
V0.53 27.04.2007 H.Buss |
- erste öffentliche Version |
V0.53b 29.04.2007 H.Buss |
- der FAKTOR_I war versehentlich auf Null, dann liegt der MikroKopter nicht so hart in der Luft |
V0.53c 29.04.2007 H.Buss |
- es gib ein Menü, in dem die Werte der Kanäle nach Nick, Roll, Gas,... sortiert sind. |
Die angezeigten Werte waren nicht die Werte der Funke |
V0.54 01.05.2007 H.Buss |
- die Paramtersätze können jetzt vor dem Start ausgewählt werden |
Dazu wird beim Kalibrieren der Messwerte (Gashebel oben links) der Nick-Rollhebel abgefragt: |
2 3 4 |
1 x 5 |
- - - |
Bedeutet: Nick-Rollhebel Links Mitte = Setting:1 Links Oben = Setting:2 usw. |
- der Faktor_I für den Hauptregler ist hinzugekommen. Im Heading-Hold-Modus sollte er vergössert werden, was Stabilität bringt |
V0.55 14.05.2007 H.Buss |
- es können nun Servos an J3,J4,J5 mit den Kanälen 5-7 gesteuert werden |
V0.56 14.05.2007 H.Buss |
- es gab Probleme mit Funken, die mehr als 8 Kanäle haben, wenn mehrere Kanäle dann auf Null waren |
- Funken, die nicht bis +-120 aussteuern können, sollten jetzt auch gehen |
V0.57 24.05.2007 H.Buss |
- Der Höhenregler kann nun auch mittels Schalter bedient werden |
- Bug im Gier-Algorithmus behoben; Schnelles Gieren fürhrte dazu, dass der MK zu weit gedreht hat |
- Kompass-Einfluss dämpfen bei Neigung |
- Man kann zwischen Kompass FIX (Richtung beim Kalibrieren) und Variabel (einstellbar per Gier) wählen |
- Der Motortest vom Kopter-Tool geht jetzt |
- Man kann den Parametersätzen einen Namen geben |
- Das Kamerasetting ist unter Setting 2 defaultmässig integriert |
V0.58 30.05.2007 H.Buss |
- Der Höhenregler-Algorithmus wird nun umgangen, wenn der Höhenreglerschalter aus ist |
V0.60 17.08.2007 H.Buss |
- "Schwindel-Bug" behoben |
- Die Poti-Werte werden jetzt auf Unterlauf (<0) überprüft |
- Poti4 zugefügt |
- Es werden jetzt 8 Kanäle ausgewertet |
- Kamera-Servo (an J7) |
- Die Settings müssen überschrieben werden |
V0.61 - V0.63 H.Buss 27.09.2007 |
- Poti 4 und Kanal 8 werden im Menü angezeigt |
- ein paar Kleinigkeiten bei den DefaultKonstanten2 bereinigt |
- Analog.c: Aktuell_ax korrigiert |
- auf 32 Debug-Kanäle erweitert |
- Loopings sind jetzt möglich und einzeln im KopterTool freischaltbar |
- leichte Anpassungen im Gier - Geschwindigkeit und Drift |
- die Hardwareversion V1.1 wird erkannt und das Programm stellt sich auf die geänderte Gyroverstärkung und die geänderten Portpins ein |
- die Software startet nach dem Einschalten schneller, weil der Luftdruckoffset schneller gefunden wird |
- die PPM-Ausgänge liegen wieder an den Pins an |
- Details an der Sensordatenverarbeitung -> es fliegt sich geringfügig anders |
- der MK ist bei wenig Gas nicht mehr so giftig -> soll das Landen vereinfachen |
- I2C-Bus läuft jetzt sicher nach einer Störung wieder an |
- Sticksignale werden präziser ausgewertet |
- Stick-Kanäle werden ans Kopter-Tool übertragen |
- Es muss die Version V1.47 des Kopter-Tool verwendet werden |
- Die Settings werden auf Default zurückgesetzt |
- am Piepen kann man die Fehlerart unterscheiden |
1. einzelnes Piepen beim Einschalten und Kalibrieren |
2. langsames Intervall mindestens 1 Sek -> Empfangsausfall |
3. schnelleres Intervall mindestens 1 Sek -> Akku |
4. sehr schnelles Intervall mindestens 1 Sek -> Kommunikation zu den Reglern gestört |
V0.64 H.Buss 30.09.2007 |
- beim Gieren wurden die Achsen nicht hart genug geregelt |
V0.65a H.Buss 15.10.2007 |
- Integral im Mischer wieder integriert |
- Feinabstimmung im ACC/Gyro Abgleich -> 1/32 & 100 |
- ACC/Gyro Abgleich auch bei HH |
V0.66a H.Buss 3.11.2007 |
- Messwertverarbeitung aus dem Analog-Interrupt entfernt |
- Analogmessung hängt jetzt am FC-Timing |
- Looping-Stick-Hysterese eingebaut |
- Looping-180°-Umschlag einstellbar |
- Achsenkopplung: Gierbewegung verkoppelt Nick und Roll |
- Lageregelung nach ACC-Sensor verbessert |
- zusätzlicher I-Anteil in der Lageregelung verbessert die Neutrallage |
- Gyrodriftkompensation überarbeitet |
- Bug in der Gier-Stick-Berechnung behoben |
- Gyro-Messung auf 1kHz beschleunigt |
V0.67a H.Buss 16.11.2007 |
- der Hauptregler-I-Anteil wirkt jetzt nur noch auf den Winkel (ausser im HH-Mode) |
- Gyro-Acc-Abgleich jetzt wieder in jedem Zyklus |
- Feinabstimmung |
- Beim HH-Modus gab es noch Bugs |
V0.67e H.Buss 29.11.2007 |
- Parameter: Dynamic Stability und Driftfaktor eingeführt |
- Die Namen der Analogwerte werden jetzt zum Koptertool übertragen |
- Kompatibilität zum Koptertool erhöht |
V0.67f H.Buss 04.12.2007 |
- Giersteuerwert im Mischer auf Gas/2 begrenzt |
- Die Analogwerte des ACC-Sensors können dauerhaft im EEPROM gespeichert werden |
- Das Integral des Hauptreglers wird jetzt linear entladen und nicht mehr proportional |