/branches/v0.60_MicroMag3_Nick666/COPYING |
---|
0,0 → 1,674 |
GNU GENERAL PUBLIC LICENSE |
Version 3, 29 June 2007 |
Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/> |
Everyone is permitted to copy and distribute verbatim copies |
of this license document, but changing it is not allowed. |
Preamble |
The GNU General Public License is a free, copyleft license for |
software and other kinds of works. |
The licenses for most software and other practical works are designed |
to take away your freedom to share and change the works. By contrast, |
the GNU General Public License is intended to guarantee your freedom to |
share and change all versions of a program--to make sure it remains free |
software for all its users. We, the Free Software Foundation, use the |
GNU General Public License for most of our software; it applies also to |
any other work released this way by its authors. You can apply it to |
your programs, too. |
When we speak of free software, we are referring to freedom, not |
price. Our General Public Licenses are designed to make sure that you |
have the freedom to distribute copies of free software (and charge for |
them if you wish), that you receive source code or can get it if you |
want it, that you can change the software or use pieces of it in new |
free programs, and that you know you can do these things. |
To protect your rights, we need to prevent others from denying you |
these rights or asking you to surrender the rights. Therefore, you have |
certain responsibilities if you distribute copies of the software, or if |
you modify it: responsibilities to respect the freedom of others. |
For example, if you distribute copies of such a program, whether |
gratis or for a fee, you must pass on to the recipients the same |
freedoms that you received. You must make sure that they, too, receive |
or can get the source code. And you must show them these terms so they |
know their rights. |
Developers that use the GNU GPL protect your rights with two steps: |
(1) assert copyright on the software, and (2) offer you this License |
giving you legal permission to copy, distribute and/or modify it. |
For the developers' and authors' protection, the GPL clearly explains |
that there is no warranty for this free software. For both users' and |
authors' sake, the GPL requires that modified versions be marked as |
changed, so that their problems will not be attributed erroneously to |
authors of previous versions. |
Some devices are designed to deny users access to install or run |
modified versions of the software inside them, although the manufacturer |
can do so. This is fundamentally incompatible with the aim of |
protecting users' freedom to change the software. The systematic |
pattern of such abuse occurs in the area of products for individuals to |
use, which is precisely where it is most unacceptable. Therefore, we |
have designed this version of the GPL to prohibit the practice for those |
products. If such problems arise substantially in other domains, we |
stand ready to extend this provision to those domains in future versions |
of the GPL, as needed to protect the freedom of users. |
Finally, every program is threatened constantly by software patents. |
States should not allow patents to restrict development and use of |
software on general-purpose computers, but in those that do, we wish to |
avoid the special danger that patents applied to a free program could |
make it effectively proprietary. To prevent this, the GPL assures that |
patents cannot be used to render the program non-free. |
The precise terms and conditions for copying, distribution and |
modification follow. |
TERMS AND CONDITIONS |
0. Definitions. |
"This License" refers to version 3 of the GNU General Public License. |
"Copyright" also means copyright-like laws that apply to other kinds of |
works, such as semiconductor masks. |
"The Program" refers to any copyrightable work licensed under this |
License. Each licensee is addressed as "you". "Licensees" and |
"recipients" may be individuals or organizations. |
To "modify" a work means to copy from or adapt all or part of the work |
in a fashion requiring copyright permission, other than the making of an |
exact copy. The resulting work is called a "modified version" of the |
earlier work or a work "based on" the earlier work. |
A "covered work" means either the unmodified Program or a work based |
on the Program. |
To "propagate" a work means to do anything with it that, without |
permission, would make you directly or secondarily liable for |
infringement under applicable copyright law, except executing it on a |
computer or modifying a private copy. Propagation includes copying, |
distribution (with or without modification), making available to the |
public, and in some countries other activities as well. |
To "convey" a work means any kind of propagation that enables other |
parties to make or receive copies. Mere interaction with a user through |
a computer network, with no transfer of a copy, is not conveying. |
An interactive user interface displays "Appropriate Legal Notices" |
to the extent that it includes a convenient and prominently visible |
feature that (1) displays an appropriate copyright notice, and (2) |
tells the user that there is no warranty for the work (except to the |
extent that warranties are provided), that licensees may convey the |
work under this License, and how to view a copy of this License. If |
the interface presents a list of user commands or options, such as a |
menu, a prominent item in the list meets this criterion. |
1. Source Code. |
The "source code" for a work means the preferred form of the work |
for making modifications to it. "Object code" means any non-source |
form of a work. |
A "Standard Interface" means an interface that either is an official |
standard defined by a recognized standards body, or, in the case of |
interfaces specified for a particular programming language, one that |
is widely used among developers working in that language. |
The "System Libraries" of an executable work include anything, other |
than the work as a whole, that (a) is included in the normal form of |
packaging a Major Component, but which is not part of that Major |
Component, and (b) serves only to enable use of the work with that |
Major Component, or to implement a Standard Interface for which an |
implementation is available to the public in source code form. A |
"Major Component", in this context, means a major essential component |
(kernel, window system, and so on) of the specific operating system |
(if any) on which the executable work runs, or a compiler used to |
produce the work, or an object code interpreter used to run it. |
The "Corresponding Source" for a work in object code form means all |
the source code needed to generate, install, and (for an executable |
work) run the object code and to modify the work, including scripts to |
control those activities. However, it does not include the work's |
System Libraries, or general-purpose tools or generally available free |
programs which are used unmodified in performing those activities but |
which are not part of the work. For example, Corresponding Source |
includes interface definition files associated with source files for |
the work, and the source code for shared libraries and dynamically |
linked subprograms that the work is specifically designed to require, |
such as by intimate data communication or control flow between those |
subprograms and other parts of the work. |
The Corresponding Source need not include anything that users |
can regenerate automatically from other parts of the Corresponding |
Source. |
The Corresponding Source for a work in source code form is that |
same work. |
2. Basic Permissions. |
All rights granted under this License are granted for the term of |
copyright on the Program, and are irrevocable provided the stated |
conditions are met. This License explicitly affirms your unlimited |
permission to run the unmodified Program. The output from running a |
covered work is covered by this License only if the output, given its |
content, constitutes a covered work. This License acknowledges your |
rights of fair use or other equivalent, as provided by copyright law. |
You may make, run and propagate covered works that you do not |
convey, without conditions so long as your license otherwise remains |
in force. You may convey covered works to others for the sole purpose |
of having them make modifications exclusively for you, or provide you |
with facilities for running those works, provided that you comply with |
the terms of this License in conveying all material for which you do |
not control copyright. Those thus making or running the covered works |
for you must do so exclusively on your behalf, under your direction |
and control, on terms that prohibit them from making any copies of |
your copyrighted material outside their relationship with you. |
Conveying under any other circumstances is permitted solely under |
the conditions stated below. Sublicensing is not allowed; section 10 |
makes it unnecessary. |
3. Protecting Users' Legal Rights From Anti-Circumvention Law. |
No covered work shall be deemed part of an effective technological |
measure under any applicable law fulfilling obligations under article |
11 of the WIPO copyright treaty adopted on 20 December 1996, or |
similar laws prohibiting or restricting circumvention of such |
measures. |
When you convey a covered work, you waive any legal power to forbid |
circumvention of technological measures to the extent such circumvention |
is effected by exercising rights under this License with respect to |
the covered work, and you disclaim any intention to limit operation or |
modification of the work as a means of enforcing, against the work's |
users, your or third parties' legal rights to forbid circumvention of |
technological measures. |
4. Conveying Verbatim Copies. |
You may convey verbatim copies of the Program's source code as you |
receive it, in any medium, provided that you conspicuously and |
appropriately publish on each copy an appropriate copyright notice; |
keep intact all notices stating that this License and any |
non-permissive terms added in accord with section 7 apply to the code; |
keep intact all notices of the absence of any warranty; and give all |
recipients a copy of this License along with the Program. |
You may charge any price or no price for each copy that you convey, |
and you may offer support or warranty protection for a fee. |
5. Conveying Modified Source Versions. |
You may convey a work based on the Program, or the modifications to |
produce it from the Program, in the form of source code under the |
terms of section 4, provided that you also meet all of these conditions: |
a) The work must carry prominent notices stating that you modified |
it, and giving a relevant date. |
b) The work must carry prominent notices stating that it is |
released under this License and any conditions added under section |
7. This requirement modifies the requirement in section 4 to |
"keep intact all notices". |
c) You must license the entire work, as a whole, under this |
License to anyone who comes into possession of a copy. This |
License will therefore apply, along with any applicable section 7 |
additional terms, to the whole of the work, and all its parts, |
regardless of how they are packaged. This License gives no |
permission to license the work in any other way, but it does not |
invalidate such permission if you have separately received it. |
d) If the work has interactive user interfaces, each must display |
Appropriate Legal Notices; however, if the Program has interactive |
interfaces that do not display Appropriate Legal Notices, your |
work need not make them do so. |
A compilation of a covered work with other separate and independent |
works, which are not by their nature extensions of the covered work, |
and which are not combined with it such as to form a larger program, |
in or on a volume of a storage or distribution medium, is called an |
"aggregate" if the compilation and its resulting copyright are not |
used to limit the access or legal rights of the compilation's users |
beyond what the individual works permit. Inclusion of a covered work |
in an aggregate does not cause this License to apply to the other |
parts of the aggregate. |
6. Conveying Non-Source Forms. |
You may convey a covered work in object code form under the terms |
of sections 4 and 5, provided that you also convey the |
machine-readable Corresponding Source under the terms of this License, |
in one of these ways: |
a) Convey the object code in, or embodied in, a physical product |
(including a physical distribution medium), accompanied by the |
Corresponding Source fixed on a durable physical medium |
customarily used for software interchange. |
b) Convey the object code in, or embodied in, a physical product |
(including a physical distribution medium), accompanied by a |
written offer, valid for at least three years and valid for as |
long as you offer spare parts or customer support for that product |
model, to give anyone who possesses the object code either (1) a |
copy of the Corresponding Source for all the software in the |
product that is covered by this License, on a durable physical |
medium customarily used for software interchange, for a price no |
more than your reasonable cost of physically performing this |
conveying of source, or (2) access to copy the |
Corresponding Source from a network server at no charge. |
c) Convey individual copies of the object code with a copy of the |
written offer to provide the Corresponding Source. This |
alternative is allowed only occasionally and noncommercially, and |
only if you received the object code with such an offer, in accord |
with subsection 6b. |
d) Convey the object code by offering access from a designated |
place (gratis or for a charge), and offer equivalent access to the |
Corresponding Source in the same way through the same place at no |
further charge. You need not require recipients to copy the |
Corresponding Source along with the object code. If the place to |
copy the object code is a network server, the Corresponding Source |
may be on a different server (operated by you or a third party) |
that supports equivalent copying facilities, provided you maintain |
clear directions next to the object code saying where to find the |
Corresponding Source. Regardless of what server hosts the |
Corresponding Source, you remain obligated to ensure that it is |
available for as long as needed to satisfy these requirements. |
e) Convey the object code using peer-to-peer transmission, provided |
you inform other peers where the object code and Corresponding |
Source of the work are being offered to the general public at no |
charge under subsection 6d. |
A separable portion of the object code, whose source code is excluded |
from the Corresponding Source as a System Library, need not be |
included in conveying the object code work. |
A "User Product" is either (1) a "consumer product", which means any |
tangible personal property which is normally used for personal, family, |
or household purposes, or (2) anything designed or sold for incorporation |
into a dwelling. In determining whether a product is a consumer product, |
doubtful cases shall be resolved in favor of coverage. For a particular |
product received by a particular user, "normally used" refers to a |
typical or common use of that class of product, regardless of the status |
of the particular user or of the way in which the particular user |
actually uses, or expects or is expected to use, the product. A product |
is a consumer product regardless of whether the product has substantial |
commercial, industrial or non-consumer uses, unless such uses represent |
the only significant mode of use of the product. |
"Installation Information" for a User Product means any methods, |
procedures, authorization keys, or other information required to install |
and execute modified versions of a covered work in that User Product from |
a modified version of its Corresponding Source. The information must |
suffice to ensure that the continued functioning of the modified object |
code is in no case prevented or interfered with solely because |
modification has been made. |
If you convey an object code work under this section in, or with, or |
specifically for use in, a User Product, and the conveying occurs as |
part of a transaction in which the right of possession and use of the |
User Product is transferred to the recipient in perpetuity or for a |
fixed term (regardless of how the transaction is characterized), the |
Corresponding Source conveyed under this section must be accompanied |
by the Installation Information. But this requirement does not apply |
if neither you nor any third party retains the ability to install |
modified object code on the User Product (for example, the work has |
been installed in ROM). |
The requirement to provide Installation Information does not include a |
requirement to continue to provide support service, warranty, or updates |
for a work that has been modified or installed by the recipient, or for |
the User Product in which it has been modified or installed. Access to a |
network may be denied when the modification itself materially and |
adversely affects the operation of the network or violates the rules and |
protocols for communication across the network. |
Corresponding Source conveyed, and Installation Information provided, |
in accord with this section must be in a format that is publicly |
documented (and with an implementation available to the public in |
source code form), and must require no special password or key for |
unpacking, reading or copying. |
7. Additional Terms. |
"Additional permissions" are terms that supplement the terms of this |
License by making exceptions from one or more of its conditions. |
Additional permissions that are applicable to the entire Program shall |
be treated as though they were included in this License, to the extent |
that they are valid under applicable law. If additional permissions |
apply only to part of the Program, that part may be used separately |
under those permissions, but the entire Program remains governed by |
this License without regard to the additional permissions. |
When you convey a copy of a covered work, you may at your option |
remove any additional permissions from that copy, or from any part of |
it. (Additional permissions may be written to require their own |
removal in certain cases when you modify the work.) You may place |
additional permissions on material, added by you to a covered work, |
for which you have or can give appropriate copyright permission. |
Notwithstanding any other provision of this License, for material you |
add to a covered work, you may (if authorized by the copyright holders of |
that material) supplement the terms of this License with terms: |
a) Disclaiming warranty or limiting liability differently from the |
terms of sections 15 and 16 of this License; or |
b) Requiring preservation of specified reasonable legal notices or |
author attributions in that material or in the Appropriate Legal |
Notices displayed by works containing it; or |
c) Prohibiting misrepresentation of the origin of that material, or |
requiring that modified versions of such material be marked in |
reasonable ways as different from the original version; or |
d) Limiting the use for publicity purposes of names of licensors or |
authors of the material; or |
e) Declining to grant rights under trademark law for use of some |
trade names, trademarks, or service marks; or |
f) Requiring indemnification of licensors and authors of that |
material by anyone who conveys the material (or modified versions of |
it) with contractual assumptions of liability to the recipient, for |
any liability that these contractual assumptions directly impose on |
those licensors and authors. |
All other non-permissive additional terms are considered "further |
restrictions" within the meaning of section 10. If the Program as you |
received it, or any part of it, contains a notice stating that it is |
governed by this License along with a term that is a further |
restriction, you may remove that term. If a license document contains |
a further restriction but permits relicensing or conveying under this |
License, you may add to a covered work material governed by the terms |
of that license document, provided that the further restriction does |
not survive such relicensing or conveying. |
If you add terms to a covered work in accord with this section, you |
must place, in the relevant source files, a statement of the |
additional terms that apply to those files, or a notice indicating |
where to find the applicable terms. |
Additional terms, permissive or non-permissive, may be stated in the |
form of a separately written license, or stated as exceptions; |
the above requirements apply either way. |
8. Termination. |
You may not propagate or modify a covered work except as expressly |
provided under this License. Any attempt otherwise to propagate or |
modify it is void, and will automatically terminate your rights under |
this License (including any patent licenses granted under the third |
paragraph of section 11). |
However, if you cease all violation of this License, then your |
license from a particular copyright holder is reinstated (a) |
provisionally, unless and until the copyright holder explicitly and |
finally terminates your license, and (b) permanently, if the copyright |
holder fails to notify you of the violation by some reasonable means |
prior to 60 days after the cessation. |
Moreover, your license from a particular copyright holder is |
reinstated permanently if the copyright holder notifies you of the |
violation by some reasonable means, this is the first time you have |
received notice of violation of this License (for any work) from that |
copyright holder, and you cure the violation prior to 30 days after |
your receipt of the notice. |
Termination of your rights under this section does not terminate the |
licenses of parties who have received copies or rights from you under |
this License. If your rights have been terminated and not permanently |
reinstated, you do not qualify to receive new licenses for the same |
material under section 10. |
9. Acceptance Not Required for Having Copies. |
You are not required to accept this License in order to receive or |
run a copy of the Program. Ancillary propagation of a covered work |
occurring solely as a consequence of using peer-to-peer transmission |
to receive a copy likewise does not require acceptance. However, |
nothing other than this License grants you permission to propagate or |
modify any covered work. These actions infringe copyright if you do |
not accept this License. Therefore, by modifying or propagating a |
covered work, you indicate your acceptance of this License to do so. |
10. Automatic Licensing of Downstream Recipients. |
Each time you convey a covered work, the recipient automatically |
receives a license from the original licensors, to run, modify and |
propagate that work, subject to this License. You are not responsible |
for enforcing compliance by third parties with this License. |
An "entity transaction" is a transaction transferring control of an |
organization, or substantially all assets of one, or subdividing an |
organization, or merging organizations. If propagation of a covered |
work results from an entity transaction, each party to that |
transaction who receives a copy of the work also receives whatever |
licenses to the work the party's predecessor in interest had or could |
give under the previous paragraph, plus a right to possession of the |
Corresponding Source of the work from the predecessor in interest, if |
the predecessor has it or can get it with reasonable efforts. |
You may not impose any further restrictions on the exercise of the |
rights granted or affirmed under this License. For example, you may |
not impose a license fee, royalty, or other charge for exercise of |
rights granted under this License, and you may not initiate litigation |
(including a cross-claim or counterclaim in a lawsuit) alleging that |
any patent claim is infringed by making, using, selling, offering for |
sale, or importing the Program or any portion of it. |
11. Patents. |
A "contributor" is a copyright holder who authorizes use under this |
License of the Program or a work on which the Program is based. The |
work thus licensed is called the contributor's "contributor version". |
A contributor's "essential patent claims" are all patent claims |
owned or controlled by the contributor, whether already acquired or |
hereafter acquired, that would be infringed by some manner, permitted |
by this License, of making, using, or selling its contributor version, |
but do not include claims that would be infringed only as a |
consequence of further modification of the contributor version. For |
purposes of this definition, "control" includes the right to grant |
patent sublicenses in a manner consistent with the requirements of |
this License. |
Each contributor grants you a non-exclusive, worldwide, royalty-free |
patent license under the contributor's essential patent claims, to |
make, use, sell, offer for sale, import and otherwise run, modify and |
propagate the contents of its contributor version. |
In the following three paragraphs, a "patent license" is any express |
agreement or commitment, however denominated, not to enforce a patent |
(such as an express permission to practice a patent or covenant not to |
sue for patent infringement). To "grant" such a patent license to a |
party means to make such an agreement or commitment not to enforce a |
patent against the party. |
If you convey a covered work, knowingly relying on a patent license, |
and the Corresponding Source of the work is not available for anyone |
to copy, free of charge and under the terms of this License, through a |
publicly available network server or other readily accessible means, |
then you must either (1) cause the Corresponding Source to be so |
available, or (2) arrange to deprive yourself of the benefit of the |
patent license for this particular work, or (3) arrange, in a manner |
consistent with the requirements of this License, to extend the patent |
license to downstream recipients. "Knowingly relying" means you have |
actual knowledge that, but for the patent license, your conveying the |
covered work in a country, or your recipient's use of the covered work |
in a country, would infringe one or more identifiable patents in that |
country that you have reason to believe are valid. |
If, pursuant to or in connection with a single transaction or |
arrangement, you convey, or propagate by procuring conveyance of, a |
covered work, and grant a patent license to some of the parties |
receiving the covered work authorizing them to use, propagate, modify |
or convey a specific copy of the covered work, then the patent license |
you grant is automatically extended to all recipients of the covered |
work and works based on it. |
A patent license is "discriminatory" if it does not include within |
the scope of its coverage, prohibits the exercise of, or is |
conditioned on the non-exercise of one or more of the rights that are |
specifically granted under this License. You may not convey a covered |
work if you are a party to an arrangement with a third party that is |
in the business of distributing software, under which you make payment |
to the third party based on the extent of your activity of conveying |
the work, and under which the third party grants, to any of the |
parties who would receive the covered work from you, a discriminatory |
patent license (a) in connection with copies of the covered work |
conveyed by you (or copies made from those copies), or (b) primarily |
for and in connection with specific products or compilations that |
contain the covered work, unless you entered into that arrangement, |
or that patent license was granted, prior to 28 March 2007. |
Nothing in this License shall be construed as excluding or limiting |
any implied license or other defenses to infringement that may |
otherwise be available to you under applicable patent law. |
12. No Surrender of Others' Freedom. |
If conditions are imposed on you (whether by court order, agreement or |
otherwise) that contradict the conditions of this License, they do not |
excuse you from the conditions of this License. If you cannot convey a |
covered work so as to satisfy simultaneously your obligations under this |
License and any other pertinent obligations, then as a consequence you may |
not convey it at all. For example, if you agree to terms that obligate you |
to collect a royalty for further conveying from those to whom you convey |
the Program, the only way you could satisfy both those terms and this |
License would be to refrain entirely from conveying the Program. |
13. Use with the GNU Affero General Public License. |
Notwithstanding any other provision of this License, you have |
permission to link or combine any covered work with a work licensed |
under version 3 of the GNU Affero General Public License into a single |
combined work, and to convey the resulting work. The terms of this |
License will continue to apply to the part which is the covered work, |
but the special requirements of the GNU Affero General Public License, |
section 13, concerning interaction through a network will apply to the |
combination as such. |
14. Revised Versions of this License. |
The Free Software Foundation may publish revised and/or new versions of |
the GNU General Public License from time to time. Such new versions will |
be similar in spirit to the present version, but may differ in detail to |
address new problems or concerns. |
Each version is given a distinguishing version number. If the |
Program specifies that a certain numbered version of the GNU General |
Public License "or any later version" applies to it, you have the |
option of following the terms and conditions either of that numbered |
version or of any later version published by the Free Software |
Foundation. If the Program does not specify a version number of the |
GNU General Public License, you may choose any version ever published |
by the Free Software Foundation. |
If the Program specifies that a proxy can decide which future |
versions of the GNU General Public License can be used, that proxy's |
public statement of acceptance of a version permanently authorizes you |
to choose that version for the Program. |
Later license versions may give you additional or different |
permissions. However, no additional obligations are imposed on any |
author or copyright holder as a result of your choosing to follow a |
later version. |
15. Disclaimer of Warranty. |
THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY |
APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT |
HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY |
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, |
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR |
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM |
IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF |
ALL NECESSARY SERVICING, REPAIR OR CORRECTION. |
16. Limitation of Liability. |
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING |
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS |
THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY |
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE |
USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF |
DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD |
PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), |
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF |
SUCH DAMAGES. |
17. Interpretation of Sections 15 and 16. |
If the disclaimer of warranty and limitation of liability provided |
above cannot be given local legal effect according to their terms, |
reviewing courts shall apply local law that most closely approximates |
an absolute waiver of all civil liability in connection with the |
Program, unless a warranty or assumption of liability accompanies a |
copy of the Program in return for a fee. |
END OF TERMS AND CONDITIONS |
How to Apply These Terms to Your New Programs |
If you develop a new program, and you want it to be of the greatest |
possible use to the public, the best way to achieve this is to make it |
free software which everyone can redistribute and change under these terms. |
To do so, attach the following notices to the program. It is safest |
to attach them to the start of each source file to most effectively |
state the exclusion of warranty; and each file should have at least |
the "copyright" line and a pointer to where the full notice is found. |
<one line to give the program's name and a brief idea of what it does.> |
Copyright (C) <year> <name of author> |
This program is free software: you can redistribute it and/or modify |
it under the terms of the GNU General Public License as published by |
the Free Software Foundation, either version 3 of the License, or |
(at your option) any later version. |
This program is distributed in the hope that it will be useful, |
but WITHOUT ANY WARRANTY; without even the implied warranty of |
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
GNU General Public License for more details. |
You should have received a copy of the GNU General Public License |
along with this program. If not, see <http://www.gnu.org/licenses/>. |
Also add information on how to contact you by electronic and paper mail. |
If the program does terminal interaction, make it output a short |
notice like this when it starts in an interactive mode: |
<program> Copyright (C) <year> <name of author> |
This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. |
This is free software, and you are welcome to redistribute it |
under certain conditions; type `show c' for details. |
The hypothetical commands `show w' and `show c' should show the appropriate |
parts of the General Public License. Of course, your program's commands |
might be different; for a GUI interface, you would use an "about box". |
You should also get your employer (if you work as a programmer) or school, |
if any, to sign a "copyright disclaimer" for the program, if necessary. |
For more information on this, and how to apply and follow the GNU GPL, see |
<http://www.gnu.org/licenses/>. |
The GNU General Public License does not permit incorporating your program |
into proprietary programs. If your program is a subroutine library, you |
may consider it more useful to permit linking proprietary applications with |
the library. If this is what you want to do, use the GNU Lesser General |
Public License instead of this License. But first, please read |
<http://www.gnu.org/philosophy/why-not-lgpl.html>. |
/branches/v0.60_MicroMag3_Nick666/COPYING.LESSER |
---|
0,0 → 1,165 |
GNU LESSER GENERAL PUBLIC LICENSE |
Version 3, 29 June 2007 |
Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/> |
Everyone is permitted to copy and distribute verbatim copies |
of this license document, but changing it is not allowed. |
This version of the GNU Lesser General Public License incorporates |
the terms and conditions of version 3 of the GNU General Public |
License, supplemented by the additional permissions listed below. |
0. Additional Definitions. |
As used herein, "this License" refers to version 3 of the GNU Lesser |
General Public License, and the "GNU GPL" refers to version 3 of the GNU |
General Public License. |
"The Library" refers to a covered work governed by this License, |
other than an Application or a Combined Work as defined below. |
An "Application" is any work that makes use of an interface provided |
by the Library, but which is not otherwise based on the Library. |
Defining a subclass of a class defined by the Library is deemed a mode |
of using an interface provided by the Library. |
A "Combined Work" is a work produced by combining or linking an |
Application with the Library. The particular version of the Library |
with which the Combined Work was made is also called the "Linked |
Version". |
The "Minimal Corresponding Source" for a Combined Work means the |
Corresponding Source for the Combined Work, excluding any source code |
for portions of the Combined Work that, considered in isolation, are |
based on the Application, and not on the Linked Version. |
The "Corresponding Application Code" for a Combined Work means the |
object code and/or source code for the Application, including any data |
and utility programs needed for reproducing the Combined Work from the |
Application, but excluding the System Libraries of the Combined Work. |
1. Exception to Section 3 of the GNU GPL. |
You may convey a covered work under sections 3 and 4 of this License |
without being bound by section 3 of the GNU GPL. |
2. Conveying Modified Versions. |
If you modify a copy of the Library, and, in your modifications, a |
facility refers to a function or data to be supplied by an Application |
that uses the facility (other than as an argument passed when the |
facility is invoked), then you may convey a copy of the modified |
version: |
a) under this License, provided that you make a good faith effort to |
ensure that, in the event an Application does not supply the |
function or data, the facility still operates, and performs |
whatever part of its purpose remains meaningful, or |
b) under the GNU GPL, with none of the additional permissions of |
this License applicable to that copy. |
3. Object Code Incorporating Material from Library Header Files. |
The object code form of an Application may incorporate material from |
a header file that is part of the Library. You may convey such object |
code under terms of your choice, provided that, if the incorporated |
material is not limited to numerical parameters, data structure |
layouts and accessors, or small macros, inline functions and templates |
(ten or fewer lines in length), you do both of the following: |
a) Give prominent notice with each copy of the object code that the |
Library is used in it and that the Library and its use are |
covered by this License. |
b) Accompany the object code with a copy of the GNU GPL and this license |
document. |
4. Combined Works. |
You may convey a Combined Work under terms of your choice that, |
taken together, effectively do not restrict modification of the |
portions of the Library contained in the Combined Work and reverse |
engineering for debugging such modifications, if you also do each of |
the following: |
a) Give prominent notice with each copy of the Combined Work that |
the Library is used in it and that the Library and its use are |
covered by this License. |
b) Accompany the Combined Work with a copy of the GNU GPL and this license |
document. |
c) For a Combined Work that displays copyright notices during |
execution, include the copyright notice for the Library among |
these notices, as well as a reference directing the user to the |
copies of the GNU GPL and this license document. |
d) Do one of the following: |
0) Convey the Minimal Corresponding Source under the terms of this |
License, and the Corresponding Application Code in a form |
suitable for, and under terms that permit, the user to |
recombine or relink the Application with a modified version of |
the Linked Version to produce a modified Combined Work, in the |
manner specified by section 6 of the GNU GPL for conveying |
Corresponding Source. |
1) Use a suitable shared library mechanism for linking with the |
Library. A suitable mechanism is one that (a) uses at run time |
a copy of the Library already present on the user's computer |
system, and (b) will operate properly with a modified version |
of the Library that is interface-compatible with the Linked |
Version. |
e) Provide Installation Information, but only if you would otherwise |
be required to provide such information under section 6 of the |
GNU GPL, and only to the extent that such information is |
necessary to install and execute a modified version of the |
Combined Work produced by recombining or relinking the |
Application with a modified version of the Linked Version. (If |
you use option 4d0, the Installation Information must accompany |
the Minimal Corresponding Source and Corresponding Application |
Code. If you use option 4d1, you must provide the Installation |
Information in the manner specified by section 6 of the GNU GPL |
for conveying Corresponding Source.) |
5. Combined Libraries. |
You may place library facilities that are a work based on the |
Library side by side in a single library together with other library |
facilities that are not Applications and are not covered by this |
License, and convey such a combined library under terms of your |
choice, if you do both of the following: |
a) Accompany the combined library with a copy of the same work based |
on the Library, uncombined with any other library facilities, |
conveyed under the terms of this License. |
b) Give prominent notice with the combined library that part of it |
is a work based on the Library, and explaining where to find the |
accompanying uncombined form of the same work. |
6. Revised Versions of the GNU Lesser General Public License. |
The Free Software Foundation may publish revised and/or new versions |
of the GNU Lesser General Public License from time to time. Such new |
versions will be similar in spirit to the present version, but may |
differ in detail to address new problems or concerns. |
Each version is given a distinguishing version number. If the |
Library as you received it specifies that a certain numbered version |
of the GNU Lesser General Public License "or any later version" |
applies to it, you have the option of following the terms and |
conditions either of that published version or of any later version |
published by the Free Software Foundation. If the Library as you |
received it does not specify a version number of the GNU Lesser |
General Public License, you may choose any version of the GNU Lesser |
General Public License ever published by the Free Software Foundation. |
If the Library as you received it specifies that a proxy can decide |
whether future versions of the GNU Lesser General Public License shall |
apply, that proxy's public statement of acceptance of any version is |
permanent authorization for you to choose that version for the |
Library. |
/branches/v0.60_MicroMag3_Nick666/GPS.c |
---|
0,0 → 1,26 |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Copyright (c) 04.2007 Holger Buss |
// + only for non-profit use |
// + www.MikroKopter.com |
// + see the File "License.txt" for further Informations |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
#include "main.h" |
signed int GPS_Nick = 0; |
signed int GPS_Roll = 0; |
long GpsAktuell_X = 0; |
long GpsAktuell_Y = 0; |
long GpsZiel_X = 0; |
long GpsZiel_Y = 0; |
void GPS_Neutral(void) |
{ |
GpsZiel_X = GpsAktuell_X; |
GpsZiel_Y = GpsAktuell_Y; |
} |
void GPS_BerechneZielrichtung(void) |
{ |
GPS_Nick = 0; |
GPS_Roll = 0; |
} |
/branches/v0.60_MicroMag3_Nick666/Neigung mit Acc/COPYING |
---|
0,0 → 1,674 |
GNU GENERAL PUBLIC LICENSE |
Version 3, 29 June 2007 |
Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/> |
Everyone is permitted to copy and distribute verbatim copies |
of this license document, but changing it is not allowed. |
Preamble |
The GNU General Public License is a free, copyleft license for |
software and other kinds of works. |
The licenses for most software and other practical works are designed |
to take away your freedom to share and change the works. By contrast, |
the GNU General Public License is intended to guarantee your freedom to |
share and change all versions of a program--to make sure it remains free |
software for all its users. We, the Free Software Foundation, use the |
GNU General Public License for most of our software; it applies also to |
any other work released this way by its authors. You can apply it to |
your programs, too. |
When we speak of free software, we are referring to freedom, not |
price. Our General Public Licenses are designed to make sure that you |
have the freedom to distribute copies of free software (and charge for |
them if you wish), that you receive source code or can get it if you |
want it, that you can change the software or use pieces of it in new |
free programs, and that you know you can do these things. |
To protect your rights, we need to prevent others from denying you |
these rights or asking you to surrender the rights. Therefore, you have |
certain responsibilities if you distribute copies of the software, or if |
you modify it: responsibilities to respect the freedom of others. |
For example, if you distribute copies of such a program, whether |
gratis or for a fee, you must pass on to the recipients the same |
freedoms that you received. You must make sure that they, too, receive |
or can get the source code. And you must show them these terms so they |
know their rights. |
Developers that use the GNU GPL protect your rights with two steps: |
(1) assert copyright on the software, and (2) offer you this License |
giving you legal permission to copy, distribute and/or modify it. |
For the developers' and authors' protection, the GPL clearly explains |
that there is no warranty for this free software. For both users' and |
authors' sake, the GPL requires that modified versions be marked as |
changed, so that their problems will not be attributed erroneously to |
authors of previous versions. |
Some devices are designed to deny users access to install or run |
modified versions of the software inside them, although the manufacturer |
can do so. This is fundamentally incompatible with the aim of |
protecting users' freedom to change the software. The systematic |
pattern of such abuse occurs in the area of products for individuals to |
use, which is precisely where it is most unacceptable. Therefore, we |
have designed this version of the GPL to prohibit the practice for those |
products. If such problems arise substantially in other domains, we |
stand ready to extend this provision to those domains in future versions |
of the GPL, as needed to protect the freedom of users. |
Finally, every program is threatened constantly by software patents. |
States should not allow patents to restrict development and use of |
software on general-purpose computers, but in those that do, we wish to |
avoid the special danger that patents applied to a free program could |
make it effectively proprietary. To prevent this, the GPL assures that |
patents cannot be used to render the program non-free. |
The precise terms and conditions for copying, distribution and |
modification follow. |
TERMS AND CONDITIONS |
0. Definitions. |
"This License" refers to version 3 of the GNU General Public License. |
"Copyright" also means copyright-like laws that apply to other kinds of |
works, such as semiconductor masks. |
"The Program" refers to any copyrightable work licensed under this |
License. Each licensee is addressed as "you". "Licensees" and |
"recipients" may be individuals or organizations. |
To "modify" a work means to copy from or adapt all or part of the work |
in a fashion requiring copyright permission, other than the making of an |
exact copy. The resulting work is called a "modified version" of the |
earlier work or a work "based on" the earlier work. |
A "covered work" means either the unmodified Program or a work based |
on the Program. |
To "propagate" a work means to do anything with it that, without |
permission, would make you directly or secondarily liable for |
infringement under applicable copyright law, except executing it on a |
computer or modifying a private copy. Propagation includes copying, |
distribution (with or without modification), making available to the |
public, and in some countries other activities as well. |
To "convey" a work means any kind of propagation that enables other |
parties to make or receive copies. Mere interaction with a user through |
a computer network, with no transfer of a copy, is not conveying. |
An interactive user interface displays "Appropriate Legal Notices" |
to the extent that it includes a convenient and prominently visible |
feature that (1) displays an appropriate copyright notice, and (2) |
tells the user that there is no warranty for the work (except to the |
extent that warranties are provided), that licensees may convey the |
work under this License, and how to view a copy of this License. If |
the interface presents a list of user commands or options, such as a |
menu, a prominent item in the list meets this criterion. |
1. Source Code. |
The "source code" for a work means the preferred form of the work |
for making modifications to it. "Object code" means any non-source |
form of a work. |
A "Standard Interface" means an interface that either is an official |
standard defined by a recognized standards body, or, in the case of |
interfaces specified for a particular programming language, one that |
is widely used among developers working in that language. |
The "System Libraries" of an executable work include anything, other |
than the work as a whole, that (a) is included in the normal form of |
packaging a Major Component, but which is not part of that Major |
Component, and (b) serves only to enable use of the work with that |
Major Component, or to implement a Standard Interface for which an |
implementation is available to the public in source code form. A |
"Major Component", in this context, means a major essential component |
(kernel, window system, and so on) of the specific operating system |
(if any) on which the executable work runs, or a compiler used to |
produce the work, or an object code interpreter used to run it. |
The "Corresponding Source" for a work in object code form means all |
the source code needed to generate, install, and (for an executable |
work) run the object code and to modify the work, including scripts to |
control those activities. However, it does not include the work's |
System Libraries, or general-purpose tools or generally available free |
programs which are used unmodified in performing those activities but |
which are not part of the work. For example, Corresponding Source |
includes interface definition files associated with source files for |
the work, and the source code for shared libraries and dynamically |
linked subprograms that the work is specifically designed to require, |
such as by intimate data communication or control flow between those |
subprograms and other parts of the work. |
The Corresponding Source need not include anything that users |
can regenerate automatically from other parts of the Corresponding |
Source. |
The Corresponding Source for a work in source code form is that |
same work. |
2. Basic Permissions. |
All rights granted under this License are granted for the term of |
copyright on the Program, and are irrevocable provided the stated |
conditions are met. This License explicitly affirms your unlimited |
permission to run the unmodified Program. The output from running a |
covered work is covered by this License only if the output, given its |
content, constitutes a covered work. This License acknowledges your |
rights of fair use or other equivalent, as provided by copyright law. |
You may make, run and propagate covered works that you do not |
convey, without conditions so long as your license otherwise remains |
in force. You may convey covered works to others for the sole purpose |
of having them make modifications exclusively for you, or provide you |
with facilities for running those works, provided that you comply with |
the terms of this License in conveying all material for which you do |
not control copyright. Those thus making or running the covered works |
for you must do so exclusively on your behalf, under your direction |
and control, on terms that prohibit them from making any copies of |
your copyrighted material outside their relationship with you. |
Conveying under any other circumstances is permitted solely under |
the conditions stated below. Sublicensing is not allowed; section 10 |
makes it unnecessary. |
3. Protecting Users' Legal Rights From Anti-Circumvention Law. |
No covered work shall be deemed part of an effective technological |
measure under any applicable law fulfilling obligations under article |
11 of the WIPO copyright treaty adopted on 20 December 1996, or |
similar laws prohibiting or restricting circumvention of such |
measures. |
When you convey a covered work, you waive any legal power to forbid |
circumvention of technological measures to the extent such circumvention |
is effected by exercising rights under this License with respect to |
the covered work, and you disclaim any intention to limit operation or |
modification of the work as a means of enforcing, against the work's |
users, your or third parties' legal rights to forbid circumvention of |
technological measures. |
4. Conveying Verbatim Copies. |
You may convey verbatim copies of the Program's source code as you |
receive it, in any medium, provided that you conspicuously and |
appropriately publish on each copy an appropriate copyright notice; |
keep intact all notices stating that this License and any |
non-permissive terms added in accord with section 7 apply to the code; |
keep intact all notices of the absence of any warranty; and give all |
recipients a copy of this License along with the Program. |
You may charge any price or no price for each copy that you convey, |
and you may offer support or warranty protection for a fee. |
5. Conveying Modified Source Versions. |
You may convey a work based on the Program, or the modifications to |
produce it from the Program, in the form of source code under the |
terms of section 4, provided that you also meet all of these conditions: |
a) The work must carry prominent notices stating that you modified |
it, and giving a relevant date. |
b) The work must carry prominent notices stating that it is |
released under this License and any conditions added under section |
7. This requirement modifies the requirement in section 4 to |
"keep intact all notices". |
c) You must license the entire work, as a whole, under this |
License to anyone who comes into possession of a copy. This |
License will therefore apply, along with any applicable section 7 |
additional terms, to the whole of the work, and all its parts, |
regardless of how they are packaged. This License gives no |
permission to license the work in any other way, but it does not |
invalidate such permission if you have separately received it. |
d) If the work has interactive user interfaces, each must display |
Appropriate Legal Notices; however, if the Program has interactive |
interfaces that do not display Appropriate Legal Notices, your |
work need not make them do so. |
A compilation of a covered work with other separate and independent |
works, which are not by their nature extensions of the covered work, |
and which are not combined with it such as to form a larger program, |
in or on a volume of a storage or distribution medium, is called an |
"aggregate" if the compilation and its resulting copyright are not |
used to limit the access or legal rights of the compilation's users |
beyond what the individual works permit. Inclusion of a covered work |
in an aggregate does not cause this License to apply to the other |
parts of the aggregate. |
6. Conveying Non-Source Forms. |
You may convey a covered work in object code form under the terms |
of sections 4 and 5, provided that you also convey the |
machine-readable Corresponding Source under the terms of this License, |
in one of these ways: |
a) Convey the object code in, or embodied in, a physical product |
(including a physical distribution medium), accompanied by the |
Corresponding Source fixed on a durable physical medium |
customarily used for software interchange. |
b) Convey the object code in, or embodied in, a physical product |
(including a physical distribution medium), accompanied by a |
written offer, valid for at least three years and valid for as |
long as you offer spare parts or customer support for that product |
model, to give anyone who possesses the object code either (1) a |
copy of the Corresponding Source for all the software in the |
product that is covered by this License, on a durable physical |
medium customarily used for software interchange, for a price no |
more than your reasonable cost of physically performing this |
conveying of source, or (2) access to copy the |
Corresponding Source from a network server at no charge. |
c) Convey individual copies of the object code with a copy of the |
written offer to provide the Corresponding Source. This |
alternative is allowed only occasionally and noncommercially, and |
only if you received the object code with such an offer, in accord |
with subsection 6b. |
d) Convey the object code by offering access from a designated |
place (gratis or for a charge), and offer equivalent access to the |
Corresponding Source in the same way through the same place at no |
further charge. You need not require recipients to copy the |
Corresponding Source along with the object code. If the place to |
copy the object code is a network server, the Corresponding Source |
may be on a different server (operated by you or a third party) |
that supports equivalent copying facilities, provided you maintain |
clear directions next to the object code saying where to find the |
Corresponding Source. Regardless of what server hosts the |
Corresponding Source, you remain obligated to ensure that it is |
available for as long as needed to satisfy these requirements. |
e) Convey the object code using peer-to-peer transmission, provided |
you inform other peers where the object code and Corresponding |
Source of the work are being offered to the general public at no |
charge under subsection 6d. |
A separable portion of the object code, whose source code is excluded |
from the Corresponding Source as a System Library, need not be |
included in conveying the object code work. |
A "User Product" is either (1) a "consumer product", which means any |
tangible personal property which is normally used for personal, family, |
or household purposes, or (2) anything designed or sold for incorporation |
into a dwelling. In determining whether a product is a consumer product, |
doubtful cases shall be resolved in favor of coverage. For a particular |
product received by a particular user, "normally used" refers to a |
typical or common use of that class of product, regardless of the status |
of the particular user or of the way in which the particular user |
actually uses, or expects or is expected to use, the product. A product |
is a consumer product regardless of whether the product has substantial |
commercial, industrial or non-consumer uses, unless such uses represent |
the only significant mode of use of the product. |
"Installation Information" for a User Product means any methods, |
procedures, authorization keys, or other information required to install |
and execute modified versions of a covered work in that User Product from |
a modified version of its Corresponding Source. The information must |
suffice to ensure that the continued functioning of the modified object |
code is in no case prevented or interfered with solely because |
modification has been made. |
If you convey an object code work under this section in, or with, or |
specifically for use in, a User Product, and the conveying occurs as |
part of a transaction in which the right of possession and use of the |
User Product is transferred to the recipient in perpetuity or for a |
fixed term (regardless of how the transaction is characterized), the |
Corresponding Source conveyed under this section must be accompanied |
by the Installation Information. But this requirement does not apply |
if neither you nor any third party retains the ability to install |
modified object code on the User Product (for example, the work has |
been installed in ROM). |
The requirement to provide Installation Information does not include a |
requirement to continue to provide support service, warranty, or updates |
for a work that has been modified or installed by the recipient, or for |
the User Product in which it has been modified or installed. Access to a |
network may be denied when the modification itself materially and |
adversely affects the operation of the network or violates the rules and |
protocols for communication across the network. |
Corresponding Source conveyed, and Installation Information provided, |
in accord with this section must be in a format that is publicly |
documented (and with an implementation available to the public in |
source code form), and must require no special password or key for |
unpacking, reading or copying. |
7. Additional Terms. |
"Additional permissions" are terms that supplement the terms of this |
License by making exceptions from one or more of its conditions. |
Additional permissions that are applicable to the entire Program shall |
be treated as though they were included in this License, to the extent |
that they are valid under applicable law. If additional permissions |
apply only to part of the Program, that part may be used separately |
under those permissions, but the entire Program remains governed by |
this License without regard to the additional permissions. |
When you convey a copy of a covered work, you may at your option |
remove any additional permissions from that copy, or from any part of |
it. (Additional permissions may be written to require their own |
removal in certain cases when you modify the work.) You may place |
additional permissions on material, added by you to a covered work, |
for which you have or can give appropriate copyright permission. |
Notwithstanding any other provision of this License, for material you |
add to a covered work, you may (if authorized by the copyright holders of |
that material) supplement the terms of this License with terms: |
a) Disclaiming warranty or limiting liability differently from the |
terms of sections 15 and 16 of this License; or |
b) Requiring preservation of specified reasonable legal notices or |
author attributions in that material or in the Appropriate Legal |
Notices displayed by works containing it; or |
c) Prohibiting misrepresentation of the origin of that material, or |
requiring that modified versions of such material be marked in |
reasonable ways as different from the original version; or |
d) Limiting the use for publicity purposes of names of licensors or |
authors of the material; or |
e) Declining to grant rights under trademark law for use of some |
trade names, trademarks, or service marks; or |
f) Requiring indemnification of licensors and authors of that |
material by anyone who conveys the material (or modified versions of |
it) with contractual assumptions of liability to the recipient, for |
any liability that these contractual assumptions directly impose on |
those licensors and authors. |
All other non-permissive additional terms are considered "further |
restrictions" within the meaning of section 10. If the Program as you |
received it, or any part of it, contains a notice stating that it is |
governed by this License along with a term that is a further |
restriction, you may remove that term. If a license document contains |
a further restriction but permits relicensing or conveying under this |
License, you may add to a covered work material governed by the terms |
of that license document, provided that the further restriction does |
not survive such relicensing or conveying. |
If you add terms to a covered work in accord with this section, you |
must place, in the relevant source files, a statement of the |
additional terms that apply to those files, or a notice indicating |
where to find the applicable terms. |
Additional terms, permissive or non-permissive, may be stated in the |
form of a separately written license, or stated as exceptions; |
the above requirements apply either way. |
8. Termination. |
You may not propagate or modify a covered work except as expressly |
provided under this License. Any attempt otherwise to propagate or |
modify it is void, and will automatically terminate your rights under |
this License (including any patent licenses granted under the third |
paragraph of section 11). |
However, if you cease all violation of this License, then your |
license from a particular copyright holder is reinstated (a) |
provisionally, unless and until the copyright holder explicitly and |
finally terminates your license, and (b) permanently, if the copyright |
holder fails to notify you of the violation by some reasonable means |
prior to 60 days after the cessation. |
Moreover, your license from a particular copyright holder is |
reinstated permanently if the copyright holder notifies you of the |
violation by some reasonable means, this is the first time you have |
received notice of violation of this License (for any work) from that |
copyright holder, and you cure the violation prior to 30 days after |
your receipt of the notice. |
Termination of your rights under this section does not terminate the |
licenses of parties who have received copies or rights from you under |
this License. If your rights have been terminated and not permanently |
reinstated, you do not qualify to receive new licenses for the same |
material under section 10. |
9. Acceptance Not Required for Having Copies. |
You are not required to accept this License in order to receive or |
run a copy of the Program. Ancillary propagation of a covered work |
occurring solely as a consequence of using peer-to-peer transmission |
to receive a copy likewise does not require acceptance. However, |
nothing other than this License grants you permission to propagate or |
modify any covered work. These actions infringe copyright if you do |
not accept this License. Therefore, by modifying or propagating a |
covered work, you indicate your acceptance of this License to do so. |
10. Automatic Licensing of Downstream Recipients. |
Each time you convey a covered work, the recipient automatically |
receives a license from the original licensors, to run, modify and |
propagate that work, subject to this License. You are not responsible |
for enforcing compliance by third parties with this License. |
An "entity transaction" is a transaction transferring control of an |
organization, or substantially all assets of one, or subdividing an |
organization, or merging organizations. If propagation of a covered |
work results from an entity transaction, each party to that |
transaction who receives a copy of the work also receives whatever |
licenses to the work the party's predecessor in interest had or could |
give under the previous paragraph, plus a right to possession of the |
Corresponding Source of the work from the predecessor in interest, if |
the predecessor has it or can get it with reasonable efforts. |
You may not impose any further restrictions on the exercise of the |
rights granted or affirmed under this License. For example, you may |
not impose a license fee, royalty, or other charge for exercise of |
rights granted under this License, and you may not initiate litigation |
(including a cross-claim or counterclaim in a lawsuit) alleging that |
any patent claim is infringed by making, using, selling, offering for |
sale, or importing the Program or any portion of it. |
11. Patents. |
A "contributor" is a copyright holder who authorizes use under this |
License of the Program or a work on which the Program is based. The |
work thus licensed is called the contributor's "contributor version". |
A contributor's "essential patent claims" are all patent claims |
owned or controlled by the contributor, whether already acquired or |
hereafter acquired, that would be infringed by some manner, permitted |
by this License, of making, using, or selling its contributor version, |
but do not include claims that would be infringed only as a |
consequence of further modification of the contributor version. For |
purposes of this definition, "control" includes the right to grant |
patent sublicenses in a manner consistent with the requirements of |
this License. |
Each contributor grants you a non-exclusive, worldwide, royalty-free |
patent license under the contributor's essential patent claims, to |
make, use, sell, offer for sale, import and otherwise run, modify and |
propagate the contents of its contributor version. |
In the following three paragraphs, a "patent license" is any express |
agreement or commitment, however denominated, not to enforce a patent |
(such as an express permission to practice a patent or covenant not to |
sue for patent infringement). To "grant" such a patent license to a |
party means to make such an agreement or commitment not to enforce a |
patent against the party. |
If you convey a covered work, knowingly relying on a patent license, |
and the Corresponding Source of the work is not available for anyone |
to copy, free of charge and under the terms of this License, through a |
publicly available network server or other readily accessible means, |
then you must either (1) cause the Corresponding Source to be so |
available, or (2) arrange to deprive yourself of the benefit of the |
patent license for this particular work, or (3) arrange, in a manner |
consistent with the requirements of this License, to extend the patent |
license to downstream recipients. "Knowingly relying" means you have |
actual knowledge that, but for the patent license, your conveying the |
covered work in a country, or your recipient's use of the covered work |
in a country, would infringe one or more identifiable patents in that |
country that you have reason to believe are valid. |
If, pursuant to or in connection with a single transaction or |
arrangement, you convey, or propagate by procuring conveyance of, a |
covered work, and grant a patent license to some of the parties |
receiving the covered work authorizing them to use, propagate, modify |
or convey a specific copy of the covered work, then the patent license |
you grant is automatically extended to all recipients of the covered |
work and works based on it. |
A patent license is "discriminatory" if it does not include within |
the scope of its coverage, prohibits the exercise of, or is |
conditioned on the non-exercise of one or more of the rights that are |
specifically granted under this License. You may not convey a covered |
work if you are a party to an arrangement with a third party that is |
in the business of distributing software, under which you make payment |
to the third party based on the extent of your activity of conveying |
the work, and under which the third party grants, to any of the |
parties who would receive the covered work from you, a discriminatory |
patent license (a) in connection with copies of the covered work |
conveyed by you (or copies made from those copies), or (b) primarily |
for and in connection with specific products or compilations that |
contain the covered work, unless you entered into that arrangement, |
or that patent license was granted, prior to 28 March 2007. |
Nothing in this License shall be construed as excluding or limiting |
any implied license or other defenses to infringement that may |
otherwise be available to you under applicable patent law. |
12. No Surrender of Others' Freedom. |
If conditions are imposed on you (whether by court order, agreement or |
otherwise) that contradict the conditions of this License, they do not |
excuse you from the conditions of this License. If you cannot convey a |
covered work so as to satisfy simultaneously your obligations under this |
License and any other pertinent obligations, then as a consequence you may |
not convey it at all. For example, if you agree to terms that obligate you |
to collect a royalty for further conveying from those to whom you convey |
the Program, the only way you could satisfy both those terms and this |
License would be to refrain entirely from conveying the Program. |
13. Use with the GNU Affero General Public License. |
Notwithstanding any other provision of this License, you have |
permission to link or combine any covered work with a work licensed |
under version 3 of the GNU Affero General Public License into a single |
combined work, and to convey the resulting work. The terms of this |
License will continue to apply to the part which is the covered work, |
but the special requirements of the GNU Affero General Public License, |
section 13, concerning interaction through a network will apply to the |
combination as such. |
14. Revised Versions of this License. |
The Free Software Foundation may publish revised and/or new versions of |
the GNU General Public License from time to time. Such new versions will |
be similar in spirit to the present version, but may differ in detail to |
address new problems or concerns. |
Each version is given a distinguishing version number. If the |
Program specifies that a certain numbered version of the GNU General |
Public License "or any later version" applies to it, you have the |
option of following the terms and conditions either of that numbered |
version or of any later version published by the Free Software |
Foundation. If the Program does not specify a version number of the |
GNU General Public License, you may choose any version ever published |
by the Free Software Foundation. |
If the Program specifies that a proxy can decide which future |
versions of the GNU General Public License can be used, that proxy's |
public statement of acceptance of a version permanently authorizes you |
to choose that version for the Program. |
Later license versions may give you additional or different |
permissions. However, no additional obligations are imposed on any |
author or copyright holder as a result of your choosing to follow a |
later version. |
15. Disclaimer of Warranty. |
THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY |
APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT |
HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY |
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, |
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR |
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM |
IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF |
ALL NECESSARY SERVICING, REPAIR OR CORRECTION. |
16. Limitation of Liability. |
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING |
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS |
THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY |
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE |
USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF |
DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD |
PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), |
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF |
SUCH DAMAGES. |
17. Interpretation of Sections 15 and 16. |
If the disclaimer of warranty and limitation of liability provided |
above cannot be given local legal effect according to their terms, |
reviewing courts shall apply local law that most closely approximates |
an absolute waiver of all civil liability in connection with the |
Program, unless a warranty or assumption of liability accompanies a |
copy of the Program in return for a fee. |
END OF TERMS AND CONDITIONS |
How to Apply These Terms to Your New Programs |
If you develop a new program, and you want it to be of the greatest |
possible use to the public, the best way to achieve this is to make it |
free software which everyone can redistribute and change under these terms. |
To do so, attach the following notices to the program. It is safest |
to attach them to the start of each source file to most effectively |
state the exclusion of warranty; and each file should have at least |
the "copyright" line and a pointer to where the full notice is found. |
<one line to give the program's name and a brief idea of what it does.> |
Copyright (C) <year> <name of author> |
This program is free software: you can redistribute it and/or modify |
it under the terms of the GNU General Public License as published by |
the Free Software Foundation, either version 3 of the License, or |
(at your option) any later version. |
This program is distributed in the hope that it will be useful, |
but WITHOUT ANY WARRANTY; without even the implied warranty of |
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
GNU General Public License for more details. |
You should have received a copy of the GNU General Public License |
along with this program. If not, see <http://www.gnu.org/licenses/>. |
Also add information on how to contact you by electronic and paper mail. |
If the program does terminal interaction, make it output a short |
notice like this when it starts in an interactive mode: |
<program> Copyright (C) <year> <name of author> |
This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. |
This is free software, and you are welcome to redistribute it |
under certain conditions; type `show c' for details. |
The hypothetical commands `show w' and `show c' should show the appropriate |
parts of the General Public License. Of course, your program's commands |
might be different; for a GUI interface, you would use an "about box". |
You should also get your employer (if you work as a programmer) or school, |
if any, to sign a "copyright disclaimer" for the program, if necessary. |
For more information on this, and how to apply and follow the GNU GPL, see |
<http://www.gnu.org/licenses/>. |
The GNU General Public License does not permit incorporating your program |
into proprietary programs. If your program is a subroutine library, you |
may consider it more useful to permit linking proprietary applications with |
the library. If this is what you want to do, use the GNU Lesser General |
Public License instead of this License. But first, please read |
<http://www.gnu.org/philosophy/why-not-lgpl.html>. |
/branches/v0.60_MicroMag3_Nick666/Neigung mit Acc/COPYING.LESSER |
---|
0,0 → 1,165 |
GNU LESSER GENERAL PUBLIC LICENSE |
Version 3, 29 June 2007 |
Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/> |
Everyone is permitted to copy and distribute verbatim copies |
of this license document, but changing it is not allowed. |
This version of the GNU Lesser General Public License incorporates |
the terms and conditions of version 3 of the GNU General Public |
License, supplemented by the additional permissions listed below. |
0. Additional Definitions. |
As used herein, "this License" refers to version 3 of the GNU Lesser |
General Public License, and the "GNU GPL" refers to version 3 of the GNU |
General Public License. |
"The Library" refers to a covered work governed by this License, |
other than an Application or a Combined Work as defined below. |
An "Application" is any work that makes use of an interface provided |
by the Library, but which is not otherwise based on the Library. |
Defining a subclass of a class defined by the Library is deemed a mode |
of using an interface provided by the Library. |
A "Combined Work" is a work produced by combining or linking an |
Application with the Library. The particular version of the Library |
with which the Combined Work was made is also called the "Linked |
Version". |
The "Minimal Corresponding Source" for a Combined Work means the |
Corresponding Source for the Combined Work, excluding any source code |
for portions of the Combined Work that, considered in isolation, are |
based on the Application, and not on the Linked Version. |
The "Corresponding Application Code" for a Combined Work means the |
object code and/or source code for the Application, including any data |
and utility programs needed for reproducing the Combined Work from the |
Application, but excluding the System Libraries of the Combined Work. |
1. Exception to Section 3 of the GNU GPL. |
You may convey a covered work under sections 3 and 4 of this License |
without being bound by section 3 of the GNU GPL. |
2. Conveying Modified Versions. |
If you modify a copy of the Library, and, in your modifications, a |
facility refers to a function or data to be supplied by an Application |
that uses the facility (other than as an argument passed when the |
facility is invoked), then you may convey a copy of the modified |
version: |
a) under this License, provided that you make a good faith effort to |
ensure that, in the event an Application does not supply the |
function or data, the facility still operates, and performs |
whatever part of its purpose remains meaningful, or |
b) under the GNU GPL, with none of the additional permissions of |
this License applicable to that copy. |
3. Object Code Incorporating Material from Library Header Files. |
The object code form of an Application may incorporate material from |
a header file that is part of the Library. You may convey such object |
code under terms of your choice, provided that, if the incorporated |
material is not limited to numerical parameters, data structure |
layouts and accessors, or small macros, inline functions and templates |
(ten or fewer lines in length), you do both of the following: |
a) Give prominent notice with each copy of the object code that the |
Library is used in it and that the Library and its use are |
covered by this License. |
b) Accompany the object code with a copy of the GNU GPL and this license |
document. |
4. Combined Works. |
You may convey a Combined Work under terms of your choice that, |
taken together, effectively do not restrict modification of the |
portions of the Library contained in the Combined Work and reverse |
engineering for debugging such modifications, if you also do each of |
the following: |
a) Give prominent notice with each copy of the Combined Work that |
the Library is used in it and that the Library and its use are |
covered by this License. |
b) Accompany the Combined Work with a copy of the GNU GPL and this license |
document. |
c) For a Combined Work that displays copyright notices during |
execution, include the copyright notice for the Library among |
these notices, as well as a reference directing the user to the |
copies of the GNU GPL and this license document. |
d) Do one of the following: |
0) Convey the Minimal Corresponding Source under the terms of this |
License, and the Corresponding Application Code in a form |
suitable for, and under terms that permit, the user to |
recombine or relink the Application with a modified version of |
the Linked Version to produce a modified Combined Work, in the |
manner specified by section 6 of the GNU GPL for conveying |
Corresponding Source. |
1) Use a suitable shared library mechanism for linking with the |
Library. A suitable mechanism is one that (a) uses at run time |
a copy of the Library already present on the user's computer |
system, and (b) will operate properly with a modified version |
of the Library that is interface-compatible with the Linked |
Version. |
e) Provide Installation Information, but only if you would otherwise |
be required to provide such information under section 6 of the |
GNU GPL, and only to the extent that such information is |
necessary to install and execute a modified version of the |
Combined Work produced by recombining or relinking the |
Application with a modified version of the Linked Version. (If |
you use option 4d0, the Installation Information must accompany |
the Minimal Corresponding Source and Corresponding Application |
Code. If you use option 4d1, you must provide the Installation |
Information in the manner specified by section 6 of the GNU GPL |
for conveying Corresponding Source.) |
5. Combined Libraries. |
You may place library facilities that are a work based on the |
Library side by side in a single library together with other library |
facilities that are not Applications and are not covered by this |
License, and convey such a combined library under terms of your |
choice, if you do both of the following: |
a) Accompany the combined library with a copy of the same work based |
on the Library, uncombined with any other library facilities, |
conveyed under the terms of this License. |
b) Give prominent notice with the combined library that part of it |
is a work based on the Library, and explaining where to find the |
accompanying uncombined form of the same work. |
6. Revised Versions of the GNU Lesser General Public License. |
The Free Software Foundation may publish revised and/or new versions |
of the GNU Lesser General Public License from time to time. Such new |
versions will be similar in spirit to the present version, but may |
differ in detail to address new problems or concerns. |
Each version is given a distinguishing version number. If the |
Library as you received it specifies that a certain numbered version |
of the GNU Lesser General Public License "or any later version" |
applies to it, you have the option of following the terms and |
conditions either of that published version or of any later version |
published by the Free Software Foundation. If the Library as you |
received it does not specify a version number of the GNU Lesser |
General Public License, you may choose any version of the GNU Lesser |
General Public License ever published by the Free Software Foundation. |
If the Library as you received it specifies that a proxy can decide |
whether future versions of the GNU Lesser General Public License shall |
apply, that proxy's public statement of acceptance of any version is |
permanent authorization for you to choose that version for the |
Library. |
/branches/v0.60_MicroMag3_Nick666/Neigung mit Acc/GPS.c |
---|
0,0 → 1,26 |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Copyright (c) 04.2007 Holger Buss |
// + only for non-profit use |
// + www.MikroKopter.com |
// + see the File "License.txt" for further Informations |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
#include "main.h" |
signed int GPS_Nick = 0; |
signed int GPS_Roll = 0; |
long GpsAktuell_X = 0; |
long GpsAktuell_Y = 0; |
long GpsZiel_X = 0; |
long GpsZiel_Y = 0; |
void GPS_Neutral(void) |
{ |
GpsZiel_X = GpsAktuell_X; |
GpsZiel_Y = GpsAktuell_Y; |
} |
void GPS_BerechneZielrichtung(void) |
{ |
GPS_Nick = 0; |
GPS_Roll = 0; |
} |
/branches/v0.60_MicroMag3_Nick666/Neigung mit Acc/Settings.h |
---|
--- Neigung mit Acc/_Settings.h (nonexistent) |
+++ Neigung mit Acc/_Settings.h (revision 298) |
@@ -0,0 +1,50 @@ |
+// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// Testmodi |
+// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+#define MOTOR_OFF 0 |
+#define MOTOR_TEST 0 |
+ |
+// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// Abstimmung |
+// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+#define ACC_AMPLIFY 16 |
+#define FAKTOR_P 1 |
+#define FAKTOR_I 0.0001 |
+ |
+ |
+// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// Debug-Interface |
+// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+#define SIO_DEBUG 1 // Soll der Debugger aktiviert sein? |
+#define MIN_DEBUG_INTERVALL 250 // in diesem Intervall werden Degugdaten ohne Aufforderung gesendet |
+ |
+// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// Sender |
+// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+ #define K_NICK 0 |
+ #define K_ROLL 1 |
+ #define K_GAS 2 |
+ #define K_GIER 3 |
+ #define K_POTI1 4 |
+ #define K_POTI2 5 |
+ #define K_POTI3 6 |
+ #define K_POTI4 7 |
+// +++++++++++++++++++++++++++++++ |
+// + Getestete Settings: |
+// +++++++++++++++++++++++++++++++ |
+// Setting: Kamera |
+// Stick_P:3 |
+// Stick_D:0 |
+// Gyro_P: 175 |
+// Gyro_I: 175 |
+// Ki_Anteil: 10 |
+// +++++++++++++++++++++++++++++++ |
+// + Getestete Settings: |
+// +++++++++++++++++++++++++++++++ |
+// Setting: Normal |
+// Stick_P:2 |
+// Stick_D:8 |
+// Gyro_P: 80 |
+// Gyro_I: 150 |
+// Ki_Anteil: 5 |
+ |
/branches/v0.60_MicroMag3_Nick666/Neigung mit Acc/analog.c |
---|
0,0 → 1,155 |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Copyright (c) 04.2007 Holger Buss |
// + only for non-profit use |
// + www.MikroKopter.com |
// + see the File "License.txt" for further Informations |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
#include "main.h" |
volatile int Aktuell_Nick,Aktuell_Roll,Aktuell_Gier,Aktuell_ax, Aktuell_ay,Aktuell_az, UBat = 100; |
volatile int AccumulateNick = 0, AccumulateRoll = 0, AccumulateGier = 0; |
volatile int accumulate_AccRoll = 0,accumulate_AccNick = 0,accumulate_AccHoch = 0; |
volatile char MessanzahlNick = 0, MessanzahlRoll = 0, MessanzahlGier = 0; |
volatile char messanzahl_AccNick = 0, messanzahl_AccRoll = 0, messanzahl_AccHoch = 0; |
volatile long Luftdruck = 32000; |
volatile int StartLuftdruck; |
volatile unsigned int MessLuftdruck = 1023; |
unsigned char DruckOffsetSetting; |
volatile int HoeheD = 0; |
volatile char messanzahl_Druck; |
volatile int tmpLuftdruck; |
volatile unsigned int ZaehlMessungen = 0; |
//####################################################################################### |
// |
void ADC_Init(void) |
//####################################################################################### |
{ |
ADMUX = 0;//Referenz ist extern |
ADCSRA=(1<<ADEN)|(1<<ADSC)|(1<<ADATE)|(1<<ADPS2)|(1<<ADPS1)|(1<<ADPS0)|(1<<ADIE); |
//Free Running Mode, Division Factor 128, Interrupt on |
} |
void SucheLuftruckOffset(void) |
{ |
unsigned int off; |
for(off=0; off < 250;off++) |
{ |
OCR0A = off; |
Delay_ms(50); |
printf("."); |
if(MessLuftdruck < 900) break; |
} |
DruckOffsetSetting = off; |
Delay_ms(200); |
} |
//####################################################################################### |
// |
SIGNAL(SIG_ADC) |
//####################################################################################### |
{ |
static unsigned char kanal=0,state = 0; |
signed int wert; |
ANALOG_OFF; |
switch(state++) |
{ |
case 0: |
wert = (signed int) AdNeutralGier - ADC; |
AccumulateGier += wert; // |
MessanzahlGier++; |
Mess_Integral_Gier += wert;// / 16; |
Mess_Integral_Gier2 += wert; |
kanal = 1; |
ZaehlMessungen++; |
break; |
case 1: |
wert = (signed int) ADC - AdNeutralRoll; |
Mess_IntegralRoll += wert; |
Mess_IntegralRoll2 += wert; |
if(ADC < 10) wert = -700; |
if(ADC > 1000) wert = +700; |
AccumulateRoll += wert; |
MessanzahlRoll++; |
kanal = 2; |
break; |
case 2: |
wert = (signed int) ADC - AdNeutralNick; |
Mess_IntegralNick += wert; |
Mess_IntegralNick2 += wert; |
if(ADC < 10) wert = -700; |
if(ADC > 1000) wert = +700; |
AccumulateNick += wert; |
MessanzahlNick++; |
kanal = 4; |
break; |
case 3: |
UBat = (3 * UBat + ADC / 3) / 4;//(UBat + ((ADC * 39) / 256) + 19) / 2; |
kanal = 6; |
break; |
case 4: |
Aktuell_ay = NeutralAccY - ADC; |
accumulate_AccRoll += Aktuell_ay; |
messanzahl_AccRoll++; |
kanal = 7; |
break; |
case 5: |
Aktuell_ax = ADC - NeutralAccX; |
accumulate_AccNick += Aktuell_ax; |
messanzahl_AccNick++; |
kanal = 5; |
state = 6; |
break; |
case 6: |
accumulate_AccHoch = (signed int) ADC - NeutralAccZ; |
accumulate_AccHoch += abs(Aktuell_ay) / 4 + abs(Aktuell_ax) / 4; |
if(accumulate_AccHoch > 1) |
{ |
if(NeutralAccZ < 800) NeutralAccZ+= 0.02; |
} |
else if(accumulate_AccHoch < -1) |
{ |
if(NeutralAccZ > 600) NeutralAccZ-= 0.02; |
} |
messanzahl_AccHoch = 1; |
Aktuell_az = ADC; |
Mess_Integral_Hoch += accumulate_AccHoch; // Integrieren |
Mess_Integral_Hoch -= Mess_Integral_Hoch / 1024; // dämfen |
// Mess_Integral_Hoch -= Mess_Integral_Hoch / 512; // dämfen |
/* if(EE_Parameter.GlobalConfig & CFG_HOEHENREGELUNG) |
{ |
kanal = 3; |
state = 7; |
} |
else |
{ |
kanal = 0; |
state = 0; |
}*/ |
kanal = 3; |
state = 7; |
break; |
case 7: |
tmpLuftdruck += ADC; |
if(++messanzahl_Druck >= 5) |
{ |
MessLuftdruck = ADC; |
messanzahl_Druck = 0; |
HoeheD = (int)(StartLuftdruck - tmpLuftdruck - HoehenWert); // D-Anteil = neuerWert - AlterWert |
Luftdruck = (tmpLuftdruck + 3 * Luftdruck) / 4; |
HoehenWert = StartLuftdruck - Luftdruck; |
tmpLuftdruck = 0; |
} |
kanal = 0; |
state = 0; |
break; |
default: |
kanal = 0; |
state = 0; |
break; |
} |
ADMUX = kanal; |
ANALOG_ON; |
} |
/branches/v0.60_MicroMag3_Nick666/Neigung mit Acc/analog.h |
---|
0,0 → 1,23 |
/*####################################################################################### |
#######################################################################################*/ |
extern volatile int UBat; |
extern volatile int AccumulateNick, AccumulateRoll, AccumulateGier,accumulate_AccRoll,accumulate_AccNick,accumulate_AccHoch; |
extern volatile char MessanzahlNick, MessanzahlRoll, MessanzahlGier,messanzahl_AccNick, messanzahl_AccRoll,messanzahl_AccHoch; |
extern volatile int Aktuell_Nick,Aktuell_Roll,Aktuell_Gier,Aktuell_ax, Aktuell_ay,Aktuell_az; |
extern volatile long Luftdruck; |
extern volatile char messanzahl_Druck; |
extern volatile unsigned int ZaehlMessungen; |
extern unsigned char DruckOffsetSetting; |
extern volatile int HoeheD; |
extern volatile unsigned int MessLuftdruck; |
extern volatile int StartLuftdruck; |
extern unsigned int ReadADC(unsigned char adc_input); |
extern void ADC_Init(void); |
extern void SucheLuftruckOffset(void); |
#define ANALOG_OFF ADCSRA=0 |
#define ANALOG_ON ADCSRA=(1<<ADEN)|(1<<ADSC)|(1<<ADATE)|(1<<ADPS2)|(1<<ADPS1)|(1<<ADPS0)|(1<<ADIE) |
/branches/v0.60_MicroMag3_Nick666/Neigung mit Acc/compass.c |
---|
0,0 → 1,150 |
/* |
Copyright 2007, Niklas Nold |
This program (files compass.c and compass.h) is free software; you can redistribute it and/or modify |
it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; |
either version 3 of the License, or (at your option) any later version. |
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; |
without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License |
along with this program. If not, see <http://www.gnu.org/licenses/>. |
Please note: All the other files for the project "Mikrokopter" by H. Buss are under the license (license_buss.txt) published by www.mikrokopter.de |
*/ |
#include "main.h" |
MM3_struct MM3; |
//############################################################################ |
//Initialisierung der SPI-Schnittstelle |
void init_spi(void) |
//############################################################################ |
{ |
SPCR = (1<<SPIE)|(1<<SPE)|(1<<MSTR)|(1<<SPR1)|(1<<SPR0); //Interrupt an, Master, 156 kHz Oszillator |
//SPSR = (1<<SPI2X); |
DDRB |= (1<<PB7)|(1<<PB5)|(1<<PB2); // J8, MOSI, SCK Ausgang |
PORTD &= ~(1<<PD3); // J5 auf Low |
MM3.AXIS = MM3_X; |
MM3.STATE = MM3_RESET; |
} |
//############################################################################ |
//Wird in der SIGNAL (SIG_OVERFLOW0) aufgerufen |
void MM3_timer0(void) |
//############################################################################ |
{ |
switch (MM3.STATE) |
{ |
case MM3_RESET: |
PORTB |= (1<<PB2); // J8 auf High, MM3 Reset |
MM3.STATE = MM3_START_TRANSFER; |
return; |
case MM3_START_TRANSFER: |
PORTB &= ~(1<<PB2); // J8 auf Low (war ~125 µs auf High) |
if (MM3.AXIS == MM3_X) SPDR = 0x51; // Schreiben ins SPDR löst automatisch Übertragung (MOSI und MISO) aus |
else if (MM3.AXIS == MM3_Y) SPDR = 0x52; // Micromag Period Select ist auf 1024 (0x50) |
else if (MM3.AXIS == MM3_Z) SPDR = 0x53; // 1: x-Achse, 2: Y-Achse, 3: Z-Achse |
MM3.DRDY = SetDelay(15); // Laut Datenblatt max. Zeit bis Messung fertig (bei PS 1024) |
MM3.STATE = MM3_WAIT_DRDY; |
return; |
case MM3_WAIT_DRDY: |
if (CheckDelay(MM3.DRDY)) {SPDR = 0x00;MM3.STATE = MM3_DRDY;} // Irgendwas ins SPDR, damit Übertragung ausgelöst wird, wenn Wartezeit vorbei |
return; // Jetzt gehts weiter in SIGNAL (SIG_SPI) |
case MM3_TILT: // Zeitnahe Speicherung der aktuellen Neigung in ° |
MM3.NickGrad = asin_i((float)Aktuell_ax/EE_Parameter.UserParam1*200); |
MM3.RollGrad = asin_i((float)Aktuell_ay/EE_Parameter.UserParam2*200); |
MM3.AXIS = MM3_X; |
MM3.STATE = MM3_RESET; |
return; |
} |
} |
//############################################################################ |
//SPI byte ready |
SIGNAL (SIG_SPI) |
//############################################################################ |
{ |
switch (MM3.STATE) |
{ |
case MM3_DRDY: // 1. Byte ist da, abspeichern, an die MSB-Stelle rücken |
if (MM3.AXIS == MM3_X) |
{ |
MM3.x_axis = SPDR; |
MM3.x_axis <<= 8; |
} |
else if (MM3.AXIS == MM3_Y) |
{ |
MM3.y_axis = SPDR; |
MM3.y_axis <<= 8; |
} |
else // if (MM3.AXIS == MM3_Z) |
{ |
MM3.z_axis = SPDR; |
MM3.z_axis <<= 8; |
} |
SPDR=0x00; // Übertragung von 2. Byte auslösen |
MM3.STATE=MM3_BYTE2; |
return; |
case MM3_BYTE2: // 2. Byte der entsprechenden Achse ist da |
if (MM3.AXIS == MM3_X) |
{ |
MM3.x_axis |= SPDR; |
MM3.x_axis -= OFF_X; // Sofort Offset aus der Kalibrierung berücksichtigen |
MM3.AXIS = MM3_Y; |
MM3.STATE = MM3_RESET; |
} |
else if (MM3.AXIS == MM3_Y) |
{ |
MM3.y_axis |= SPDR; |
MM3.y_axis -= OFF_Y; |
MM3.AXIS = MM3_Z; |
MM3.STATE = MM3_RESET; |
} |
else // if (MM3.AXIS == MM3_Z) |
{ |
MM3.z_axis |= SPDR; |
MM3.z_axis -= OFF_Z; |
MM3.STATE = MM3_TILT; |
} |
return; |
} |
} |
signed int MM3_heading(void) |
{ |
float sin_nick, cos_nick, sin_roll, cos_roll; |
signed int x_corr, y_corr; |
signed int heading; |
// Berechung von sinus und cosinus |
sin_nick = sin_f(MM3.NickGrad); |
cos_nick = cos_f(MM3.NickGrad); |
sin_roll = sin_f(MM3.RollGrad); |
cos_roll = cos_f(MM3.RollGrad); |
// Neigungskompensation |
x_corr = (cos_nick * MM3.x_axis) + (((sin_roll * MM3.y_axis) - (cos_roll * MM3.z_axis)) * sin_nick); |
y_corr = ((cos_roll * MM3.y_axis) + (sin_roll * MM3.z_axis)); |
// Winkelberechnung |
heading = atan2_i(x_corr, y_corr); |
return (heading); |
} |
/branches/v0.60_MicroMag3_Nick666/Neigung mit Acc/compass.h |
---|
0,0 → 1,40 |
typedef struct |
{ |
uint8_t STATE; |
unsigned int DRDY; |
uint8_t AXIS; |
signed int x_axis; |
signed int y_axis; |
signed int z_axis; |
signed int NickGrad; |
signed int RollGrad; |
}MM3_struct; |
extern MM3_struct MM3; |
void init_spi(void); |
void MM3_timer0(void); |
signed int MM3_heading(void); |
#define Int2Grad_Faktor 1024 |
// Die Werte der Statemachine |
#define MM3_RESET 0 |
#define MM3_START_TRANSFER 1 |
#define MM3_WAIT_DRDY 2 |
#define MM3_DRDY 4 |
#define MM3_BYTE2 8 |
#define MM3_X 16 |
#define MM3_Y 32 |
#define MM3_Z 64 |
#define MM3_TILT 128 |
// Die Werte der Kompasskalibrierung |
// OFFSET: (Maximaler Wert + minimaler Wert) / 2 |
#define OFF_X 0 |
#define OFF_Y 0 |
#define OFF_Z 0 |
/branches/v0.60_MicroMag3_Nick666/Neigung mit Acc/eeprom.c |
---|
--- Neigung mit Acc/fc.c (nonexistent) |
+++ Neigung mit Acc/fc.c (revision 298) |
@@ -0,0 +1,819 @@ |
+/*####################################################################################### |
+Flight Control |
+#######################################################################################*/ |
+// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// + Copyright (c) 04.2007 Holger Buss |
+// + Nur für den privaten Gebrauch |
+// + www.MikroKopter.com |
+// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// + Es gilt für das gesamte Projekt (Hardware, Software, Binärfiles, Sourcecode und Dokumentation), |
+// + dass eine Nutzung (auch auszugsweise) nur für den privaten (nicht-kommerziellen) Gebrauch zulässig ist. |
+// + Sollten direkte oder indirekte kommerzielle Absichten verfolgt werden, ist mit uns (info@mikrokopter.de) Kontakt |
+// + bzgl. der Nutzungsbedingungen aufzunehmen. |
+// + Eine kommerzielle Nutzung ist z.B.Verkauf von MikroKoptern, Bestückung und Verkauf von Platinen oder Bausätzen, |
+// + Verkauf von Luftbildaufnahmen, usw. |
+// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// + Werden Teile des Quellcodes (mit oder ohne Modifikation) weiterverwendet oder veröffentlicht, |
+// + unterliegen sie auch diesen Nutzungsbedingungen und diese Nutzungsbedingungen incl. Copyright müssen dann beiliegen |
+// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// + Sollte die Software (auch auszugesweise) oder sonstige Informationen des MikroKopter-Projekts |
+// + auf anderen Webseiten oder sonstigen Medien veröffentlicht werden, muss unsere Webseite "http://www.mikrokopter.de" |
+// + eindeutig als Ursprung verlinkt werden |
+// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// + Keine Gewähr auf Fehlerfreiheit, Vollständigkeit oder Funktion |
+// + Benutzung auf eigene Gefahr |
+// + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden |
+// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// + Die Portierung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur |
+// + mit unserer Zustimmung zulässig |
+// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen |
+// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// + Redistributions of source code (with or without modifications) must retain the above copyright notice, |
+// + this list of conditions and the following disclaimer. |
+// + * Neither the name of the copyright holders nor the names of contributors may be used to endorse or promote products derived |
+// + from this software without specific prior written permission. |
+// + * The use of this project (hardware, software, binary files, sources and documentation) is only permittet |
+// + for non-commercial use (directly or indirectly) |
+// + Commercial use (for excample: selling of MikroKopters, selling of PCBs, assembly, ...) is only permitted |
+// + with our written permission |
+// + * If sources or documentations are redistributet on other webpages, out webpage (http://www.MikroKopter.de) must be |
+// + clearly linked as origin |
+// + * porting to systems other than hardware from www.mikrokopter.de is not allowed |
+// + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
+// + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
+// + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
+// + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
+// + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
+// + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
+// + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
+// + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
+// + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
+// + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
+// + POSSIBILITY OF SUCH DAMAGE. |
+// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+ |
+#include "main.h" |
+ |
+unsigned char h,m,s; |
+volatile unsigned char Timeout = 0; |
+volatile int MesswertNick,MesswertRoll,MesswertGier; |
+volatile int AdNeutralNick = 0,AdNeutralRoll = 0,AdNeutralGier = 0; |
+volatile int Mittelwert_AccNick, Mittelwert_AccRoll,Mittelwert_AccHoch, NeutralAccX=0, NeutralAccY=0; |
+volatile float NeutralAccZ = 0; |
+unsigned char CosinusNickWinkel = 0, CosinusRollWinkel = 0; |
+volatile long IntegralNick = 0,IntegralNick2 = 0; |
+volatile long IntegralRoll = 0,IntegralRoll2 = 0; |
+volatile long Integral_Gier = 0; |
+volatile long Mess_IntegralNick = 0,Mess_IntegralNick2 = 0; |
+volatile long Mess_IntegralRoll = 0,Mess_IntegralRoll2 = 0; |
+volatile long Mess_Integral_Gier = 0,Mess_Integral_Gier2 = 0; |
+volatile long Mess_Integral_Hoch = 0; |
+volatile int KompassValue = 0; |
+volatile int KompassStartwert = 0; |
+volatile int KompassRichtung = 0; |
+unsigned char MAX_GAS,MIN_GAS; |
+unsigned char Notlandung = 0; |
+unsigned char HoehenReglerAktiv = 0; |
+ |
+float GyroFaktor; |
+float IntegralFaktor; |
+ |
+volatile int DiffNick,DiffRoll; |
+int Poti1 = 0, Poti2 = 0, Poti3 = 0, Poti4 = 0; |
+volatile unsigned char Motor_Vorne,Motor_Hinten,Motor_Rechts,Motor_Links, Count; |
+unsigned char MotorWert[5]; |
+volatile unsigned char SenderOkay = 0; |
+int StickNick = 0,StickRoll = 0,StickGier = 0; |
+char MotorenEin = 0; |
+int HoehenWert = 0; |
+int SollHoehe = 0; |
+ |
+float Kp = FAKTOR_P; |
+float Ki = FAKTOR_I; |
+ |
+unsigned char Parameter_Luftdruck_D = 48; // Wert : 0-250 |
+unsigned char Parameter_MaxHoehe = 251; // Wert : 0-250 |
+unsigned char Parameter_Hoehe_P = 16; // Wert : 0-32 |
+unsigned char Parameter_Hoehe_ACC_Wirkung = 58; // Wert : 0-250 |
+unsigned char Parameter_KompassWirkung = 64; // Wert : 0-250 |
+unsigned char Parameter_Gyro_P = 50; // Wert : 10-250 |
+unsigned char Parameter_Gyro_I = 150; // Wert : 0-250 |
+unsigned char Parameter_Gier_P = 2; // Wert : 1-20 |
+unsigned char Parameter_I_Faktor = 10; // Wert : 1-20 |
+unsigned char Parameter_UserParam1 = 0; |
+unsigned char Parameter_UserParam2 = 0; |
+unsigned char Parameter_UserParam3 = 0; |
+unsigned char Parameter_UserParam4 = 0; |
+unsigned char Parameter_ServoNickControl = 100; |
+struct mk_param_struct EE_Parameter; |
+ |
+void Piep(unsigned char Anzahl) |
+{ |
+ while(Anzahl--) |
+ { |
+ if(MotorenEin) return; //auf keinen Fall im Flug! |
+ beeptime = 100; |
+ Delay_ms(250); |
+ } |
+} |
+ |
+//############################################################################ |
+// Nullwerte ermitteln |
+void SetNeutral(void) |
+//############################################################################ |
+{ |
+ unsigned int timer; |
+ NeutralAccX = 0; |
+ NeutralAccY = 0; |
+ NeutralAccZ = 0; |
+ AdNeutralNick = 0; |
+ AdNeutralRoll = 0; |
+ AdNeutralGier = 0; |
+ CalibrierMittelwert(); |
+ timer = SetDelay(5); |
+ while (!CheckDelay(timer)); |
+ CalibrierMittelwert(); |
+ if((EE_Parameter.GlobalConfig & CFG_HOEHENREGELUNG)) // Höhenregelung aktiviert? |
+ { |
+ if((MessLuftdruck > 950) || (MessLuftdruck < 750)) SucheLuftruckOffset(); |
+ } |
+ AdNeutralNick= abs(MesswertNick); |
+ AdNeutralRoll= abs(MesswertRoll); |
+ AdNeutralGier= abs(MesswertGier); |
+ NeutralAccY = abs(Mittelwert_AccRoll) / ACC_AMPLIFY; |
+ NeutralAccX = abs(Mittelwert_AccNick) / ACC_AMPLIFY; |
+ NeutralAccZ = Aktuell_az; |
+ |
+ Mess_IntegralNick = 0; |
+ Mess_IntegralNick2 = 0; |
+ Mess_IntegralRoll = 0; |
+ Mess_IntegralRoll2 = 0; |
+ Mess_Integral_Gier = 0; |
+ MesswertNick = 0; |
+ MesswertRoll = 0; |
+ MesswertGier = 0; |
+ StartLuftdruck = Luftdruck; |
+ HoeheD = 0; |
+ Mess_Integral_Hoch = 0; |
+ KompassStartwert = KompassValue; |
+ GPS_Neutral(); |
+ beeptime = 50; |
+} |
+ |
+//############################################################################ |
+// Bildet den Mittelwert aus den Messwerten |
+void Mittelwert(void) |
+//############################################################################ |
+{ |
+ // ADC auschalten, damit die Werte sich nicht während der Berechnung ändern |
+ ANALOG_OFF; |
+ if(MessanzahlNick) (MesswertNick = AccumulateNick / MessanzahlNick); |
+ if(MessanzahlRoll) (MesswertRoll = AccumulateRoll / MessanzahlRoll); |
+ if(MessanzahlGier) (MesswertGier = AccumulateGier / MessanzahlGier); |
+ if(messanzahl_AccNick) Mittelwert_AccNick = ((long)Mittelwert_AccNick * 7 + ((ACC_AMPLIFY * (long)accumulate_AccNick) / messanzahl_AccNick)) / 8L; |
+ if(messanzahl_AccRoll) Mittelwert_AccRoll = ((long)Mittelwert_AccRoll * 7 + ((ACC_AMPLIFY * (long)accumulate_AccRoll) / messanzahl_AccRoll)) / 8L; |
+ if(messanzahl_AccHoch) Mittelwert_AccHoch = ((long)Mittelwert_AccHoch * 7 + ((long)accumulate_AccHoch) / messanzahl_AccHoch) / 8L; |
+ AccumulateNick = 0; MessanzahlNick = 0; |
+ AccumulateRoll = 0; MessanzahlRoll = 0; |
+ AccumulateGier = 0; MessanzahlGier = 0; |
+ accumulate_AccRoll = 0;messanzahl_AccRoll = 0; |
+ accumulate_AccNick = 0;messanzahl_AccNick = 0; |
+ accumulate_AccHoch = 0;messanzahl_AccHoch = 0; |
+ Integral_Gier = Mess_Integral_Gier; |
+// Integral_Gier2 = Mess_Integral_Gier2; |
+ IntegralNick = Mess_IntegralNick; |
+ IntegralRoll = Mess_IntegralRoll; |
+ IntegralNick2 = Mess_IntegralNick2; |
+ IntegralRoll2 = Mess_IntegralRoll2; |
+ // ADC einschalten |
+ ANALOG_ON; |
+ |
+//------------------------------------------------------------------------------ |
+ if(MesswertNick > 200) MesswertNick += 4 * (MesswertNick - 200); |
+ else |
+ if(MesswertNick < -200) MesswertNick += 4 * (MesswertNick + 200); |
+ |
+ if(MesswertRoll > 200) MesswertRoll += 4 * (MesswertRoll - 200); |
+ else |
+ if(MesswertRoll < -200) MesswertRoll += 4 * (MesswertRoll + 200); |
+//------------------------------------------------------------------------------ |
+ if(Poti1 < PPM_in[EE_Parameter.Kanalbelegung[K_POTI1]] + 110) Poti1++; else if(Poti1 > PPM_in[EE_Parameter.Kanalbelegung[K_POTI1]] + 110 && Poti1) Poti1--; |
+ if(Poti2 < PPM_in[EE_Parameter.Kanalbelegung[K_POTI2]] + 110) Poti2++; else if(Poti2 > PPM_in[EE_Parameter.Kanalbelegung[K_POTI2]] + 110 && Poti2) Poti2--; |
+ if(Poti3 < PPM_in[EE_Parameter.Kanalbelegung[K_POTI3]] + 110) Poti3++; else if(Poti3 > PPM_in[EE_Parameter.Kanalbelegung[K_POTI3]] + 110 && Poti3) Poti3--; |
+ if(Poti4 < PPM_in[EE_Parameter.Kanalbelegung[K_POTI4]] + 110) Poti4++; else if(Poti4 > PPM_in[EE_Parameter.Kanalbelegung[K_POTI4]] + 110 && Poti4) Poti4--; |
+ if(Poti1 < 0) Poti1 = 0; else if(Poti1 > 255) Poti1 = 255; |
+ if(Poti2 < 0) Poti2 = 0; else if(Poti2 > 255) Poti2 = 255; |
+ if(Poti3 < 0) Poti3 = 0; else if(Poti3 > 255) Poti3 = 255; |
+ if(Poti4 < 0) Poti4 = 0; else if(Poti4 > 255) Poti4 = 255; |
+} |
+ |
+//############################################################################ |
+// Messwerte beim Ermitteln der Nullage |
+void CalibrierMittelwert(void) |
+//############################################################################ |
+{ |
+ // ADC auschalten, damit die Werte sich nicht während der Berechnung ändern |
+ ANALOG_OFF; |
+ if(MessanzahlNick) (MesswertNick = AccumulateNick / MessanzahlNick); |
+ if(MessanzahlRoll) (MesswertRoll = AccumulateRoll / MessanzahlRoll); |
+ if(MessanzahlGier) (MesswertGier = AccumulateGier / MessanzahlGier); |
+ if(messanzahl_AccNick) Mittelwert_AccNick = ((ACC_AMPLIFY * (long)accumulate_AccNick) / messanzahl_AccNick); |
+ if(messanzahl_AccRoll) Mittelwert_AccRoll = (ACC_AMPLIFY * (long)accumulate_AccRoll) / messanzahl_AccRoll; |
+ if(messanzahl_AccHoch) Mittelwert_AccHoch = ((long)accumulate_AccHoch) / messanzahl_AccHoch; |
+ AccumulateNick = 0; MessanzahlNick = 0; |
+ AccumulateRoll = 0; MessanzahlRoll = 0; |
+ AccumulateGier = 0; MessanzahlGier = 0; |
+ accumulate_AccRoll = 0;messanzahl_AccRoll = 0; |
+ accumulate_AccNick = 0;messanzahl_AccNick = 0; |
+ accumulate_AccHoch = 0;messanzahl_AccHoch = 0; |
+ // ADC einschalten |
+ ANALOG_ON; |
+ if(Poti1 < PPM_in[EE_Parameter.Kanalbelegung[K_POTI1]] + 110) Poti1++; else if(Poti1 > PPM_in[EE_Parameter.Kanalbelegung[K_POTI1]] + 110 && Poti1) Poti1--; |
+ if(Poti2 < PPM_in[EE_Parameter.Kanalbelegung[K_POTI2]] + 110) Poti2++; else if(Poti2 > PPM_in[EE_Parameter.Kanalbelegung[K_POTI2]] + 110 && Poti2) Poti2--; |
+ if(Poti3 < PPM_in[EE_Parameter.Kanalbelegung[K_POTI3]] + 110) Poti3++; else if(Poti3 > PPM_in[EE_Parameter.Kanalbelegung[K_POTI3]] + 110 && Poti3) Poti3--; |
+ if(Poti4 < PPM_in[EE_Parameter.Kanalbelegung[K_POTI4]] + 110) Poti4++; else if(Poti4 > PPM_in[EE_Parameter.Kanalbelegung[K_POTI4]] + 110 && Poti4) Poti4--; |
+ if(Poti1 < 0) Poti1 = 0; else if(Poti1 > 255) Poti1 = 255; |
+ if(Poti2 < 0) Poti2 = 0; else if(Poti2 > 255) Poti2 = 255; |
+ if(Poti3 < 0) Poti3 = 0; else if(Poti3 > 255) Poti3 = 255; |
+ if(Poti4 < 0) Poti4 = 0; else if(Poti4 > 255) Poti4 = 255; |
+} |
+ |
+//############################################################################ |
+// Senden der Motorwerte per I2C-Bus |
+void SendMotorData(void) |
+//############################################################################ |
+{ |
+ if(MOTOR_OFF || !MotorenEin) |
+ { |
+ Motor_Hinten = 0; |
+ Motor_Vorne = 0; |
+ Motor_Rechts = 0; |
+ Motor_Links = 0; |
+ if(MotorTest[0]) Motor_Vorne = MotorTest[0]; |
+ if(MotorTest[1]) Motor_Hinten = MotorTest[1]; |
+ if(MotorTest[2]) Motor_Links = MotorTest[2]; |
+ if(MotorTest[3]) Motor_Rechts = MotorTest[3]; |
+ } |
+ |
+ DebugOut.Analog[12] = Motor_Vorne; |
+ DebugOut.Analog[13] = Motor_Hinten; |
+ DebugOut.Analog[14] = Motor_Links; |
+ DebugOut.Analog[15] = Motor_Rechts; |
+ |
+ //Start I2C Interrupt Mode |
+ twi_state = 0; |
+ motor = 0; |
+ i2c_start(); |
+} |
+ |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// + Konstanten |
+// + 0-250 -> normale Werte |
+// + 251 -> Poti1 |
+// + 252 -> Poti2 |
+// + 253 -> Poti3 |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+void DefaultKonstanten1(void) |
+{ |
+ EE_Parameter.Kanalbelegung[K_NICK] = 1; |
+ EE_Parameter.Kanalbelegung[K_ROLL] = 2; |
+ EE_Parameter.Kanalbelegung[K_GAS] = 3; |
+ EE_Parameter.Kanalbelegung[K_GIER] = 4; |
+ EE_Parameter.Kanalbelegung[K_POTI1] = 5; |
+ EE_Parameter.Kanalbelegung[K_POTI2] = 6; |
+ EE_Parameter.Kanalbelegung[K_POTI3] = 7; |
+ EE_Parameter.Kanalbelegung[K_POTI4] = 8; |
+ EE_Parameter.GlobalConfig = 0;//CFG_HOEHENREGELUNG | /*CFG_HOEHEN_SCHALTER |*/ CFG_KOMPASS_AKTIV | CFG_KOMPASS_FIX;//0x01; |
+ EE_Parameter.Hoehe_MinGas = 30; |
+ EE_Parameter.MaxHoehe = 251; // Wert : 0-32 251 -> Poti1 |
+ EE_Parameter.Hoehe_P = 10; // Wert : 0-32 |
+ EE_Parameter.Luftdruck_D = 70; // Wert : 0-250 |
+ EE_Parameter.Hoehe_ACC_Wirkung = 30; // Wert : 0-250 |
+ EE_Parameter.Hoehe_Verstaerkung = 2; // Wert : 0-50 |
+ EE_Parameter.Stick_P = 4; //2 // Wert : 1-6 |
+ EE_Parameter.Stick_D = 8; //8 // Wert : 0-64 |
+ EE_Parameter.Gier_P = 16; // Wert : 1-20 |
+ EE_Parameter.Gas_Min = 15; // Wert : 0-32 |
+ EE_Parameter.Gas_Max = 250; // Wert : 33-250 |
+ EE_Parameter.GyroAccFaktor = 26; // Wert : 1-64 |
+ EE_Parameter.KompassWirkung = 128; // Wert : 0-250 |
+ EE_Parameter.Gyro_P = 120; //80 // Wert : 0-250 |
+ EE_Parameter.Gyro_I = 150; // Wert : 0-250 |
+ EE_Parameter.UnterspannungsWarnung = 90; // Wert : 0-250 |
+ EE_Parameter.NotGas = 35; // Wert : 0-250 // Gaswert bei Empangsverlust |
+ EE_Parameter.NotGasZeit = 20; // Wert : 0-250 // Zeit bis auf NotGas geschaltet wird, wg. Rx-Problemen |
+ EE_Parameter.UfoAusrichtung = 0; // X oder + Formation |
+ EE_Parameter.I_Faktor = 5; |
+ EE_Parameter.UserParam1 = 0; //zur freien Verwendung |
+ EE_Parameter.UserParam2 = 0; //zur freien Verwendung |
+ EE_Parameter.UserParam3 = 0; //zur freien Verwendung |
+ EE_Parameter.UserParam4 = 0; //zur freien Verwendung |
+ EE_Parameter.ServoNickControl = 100; // Wert : 0-250 // Stellung des Servos |
+ EE_Parameter.ServoNickComp = 40; // Wert : 0-250 // Einfluss Gyro/Servo |
+ EE_Parameter.ServoNickCompInvert = 0; // Wert : 0-250 // Richtung Einfluss Gyro/Servo |
+ EE_Parameter.ServoNickMin = 50; // Wert : 0-250 // Anschlag |
+ EE_Parameter.ServoNickMax = 150; // Wert : 0-250 // Anschlag |
+ EE_Parameter.ServoNickRefresh = 5; |
+ memcpy(EE_Parameter.Name, "Normal\0", 12); |
+} |
+ |
+void DefaultKonstanten2(void) |
+{ |
+ EE_Parameter.Kanalbelegung[K_NICK] = 1; |
+ EE_Parameter.Kanalbelegung[K_ROLL] = 2; |
+ EE_Parameter.Kanalbelegung[K_GAS] = 3; |
+ EE_Parameter.Kanalbelegung[K_GIER] = 4; |
+ EE_Parameter.Kanalbelegung[K_POTI1] = 5; |
+ EE_Parameter.Kanalbelegung[K_POTI2] = 6; |
+ EE_Parameter.Kanalbelegung[K_POTI3] = 7; |
+ EE_Parameter.GlobalConfig = 0;//CFG_HOEHENREGELUNG | /*CFG_HOEHEN_SCHALTER |*/ CFG_KOMPASS_AKTIV;//0x01; |
+ EE_Parameter.Hoehe_MinGas = 30; |
+ EE_Parameter.MaxHoehe = 251; // Wert : 0-32 251 -> Poti1 |
+ EE_Parameter.Hoehe_P = 10; // Wert : 0-32 |
+ EE_Parameter.Luftdruck_D = 50; // Wert : 0-250 |
+ EE_Parameter.Hoehe_ACC_Wirkung = 50; // Wert : 0-250 |
+ EE_Parameter.Hoehe_Verstaerkung = 2; // Wert : 0-50 |
+ EE_Parameter.Stick_P = 4; //2 // Wert : 1-6 |
+ EE_Parameter.Stick_D = 0; //8 // Wert : 0-64 |
+ EE_Parameter.Gier_P = 16; // Wert : 1-20 |
+ EE_Parameter.Gas_Min = 15; // Wert : 0-32 |
+ EE_Parameter.Gas_Max = 250; // Wert : 33-250 |
+ EE_Parameter.GyroAccFaktor = 26; // Wert : 1-64 |
+ EE_Parameter.KompassWirkung = 128; // Wert : 0-250 |
+ EE_Parameter.Gyro_P = 175; //80 // Wert : 0-250 |
+ EE_Parameter.Gyro_I = 175; // Wert : 0-250 |
+ EE_Parameter.UnterspannungsWarnung = 90; // Wert : 0-250 |
+ EE_Parameter.NotGas = 35; // Wert : 0-250 // Gaswert bei Empangsverlust |
+ EE_Parameter.NotGasZeit = 20; // Wert : 0-250 // Zeit bis auf NotGas geschaltet wird, wg. Rx-Problemen |
+ EE_Parameter.UfoAusrichtung = 0; // X oder + Formation |
+ EE_Parameter.I_Faktor = 5; |
+ EE_Parameter.UserParam1 = 0; //zur freien Verwendung |
+ EE_Parameter.UserParam2 = 0; //zur freien Verwendung |
+ EE_Parameter.UserParam3 = 0; //zur freien Verwendung |
+ EE_Parameter.UserParam4 = 0; //zur freien Verwendung |
+ EE_Parameter.UserParam3 = 0; //zur freien Verwendung |
+ EE_Parameter.UserParam4 = 0; //zur freien Verwendung |
+ EE_Parameter.ServoNickControl = 100; // Wert : 0-250 // Stellung des Servos |
+ EE_Parameter.ServoNickComp = 40; // Wert : 0-250 // Einfluss Gyro/Servo |
+ EE_Parameter.ServoNickCompInvert = 0; // Wert : 0-250 // Richtung Einfluss Gyro/Servo |
+ EE_Parameter.ServoNickMin = 50; // Wert : 0-250 // Anschlag |
+ EE_Parameter.ServoNickMax = 150; // Wert : 0-250 // Anschlag |
+ EE_Parameter.ServoNickRefresh = 5; |
+ memcpy(EE_Parameter.Name, "Kamera\0", 12); |
+} |
+ |
+ |
+//############################################################################ |
+// Trägt ggf. das Poti als Parameter ein |
+void ParameterZuordnung(void) |
+//############################################################################ |
+{ |
+ |
+ #define CHK_POTI(b,a,min,max) { if(a > 250) { if(a == 251) b = Poti1; else if(a == 252) b = Poti2; else if(a == 253) b = Poti3; else if(a == 254) b = Poti4;} else b = a; if(b <= min) b = min; else if(b >= max) b = max;} |
+ CHK_POTI(Parameter_MaxHoehe,EE_Parameter.MaxHoehe,0,255); |
+ CHK_POTI(Parameter_Luftdruck_D,EE_Parameter.Luftdruck_D,0,100); |
+ CHK_POTI(Parameter_Hoehe_P,EE_Parameter.Hoehe_P,0,100); |
+ CHK_POTI(Parameter_Hoehe_ACC_Wirkung,EE_Parameter.Hoehe_ACC_Wirkung,0,255); |
+ CHK_POTI(Parameter_KompassWirkung,EE_Parameter.KompassWirkung,0,255); |
+ CHK_POTI(Parameter_Gyro_P,EE_Parameter.Gyro_P,10,255); |
+ CHK_POTI(Parameter_Gyro_I,EE_Parameter.Gyro_I,0,255); |
+ CHK_POTI(Parameter_I_Faktor,EE_Parameter.I_Faktor,0,255); |
+ CHK_POTI(Parameter_UserParam1,EE_Parameter.UserParam1,0,255); |
+ CHK_POTI(Parameter_UserParam2,EE_Parameter.UserParam2,0,255); |
+ CHK_POTI(Parameter_UserParam3,EE_Parameter.UserParam3,0,255); |
+ CHK_POTI(Parameter_UserParam4,EE_Parameter.UserParam4,0,255); |
+ |
+ CHK_POTI(Parameter_ServoNickControl,EE_Parameter.ServoNickControl,0,255); |
+ CHK_POTI(Parameter_ServoNickControl,EE_Parameter.ServoNickControl,0,255); |
+ CHK_POTI(Parameter_ServoNickControl,EE_Parameter.ServoNickControl,0,255); |
+ |
+ Ki = (float) Parameter_I_Faktor * 0.0001; |
+ MAX_GAS = EE_Parameter.Gas_Max; |
+ MIN_GAS = EE_Parameter.Gas_Min; |
+} |
+ |
+ |
+//############################################################################ |
+// |
+void MotorRegler(void) |
+//############################################################################ |
+{ |
+ int motorwert,pd_ergebnis,h,tmp_int; |
+ int GierMischanteil,GasMischanteil; |
+ static long SummeNick=0,SummeRoll=0; |
+ static long sollGier = 0,tmp_long,tmp_long2; |
+ static int IntegralFehlerNick = 0; |
+ static int IntegralFehlerRoll = 0; |
+ static unsigned int RcLostTimer; |
+ static unsigned char delay_neutral = 0; |
+ static unsigned char delay_einschalten = 0,delay_ausschalten = 0; |
+ static unsigned int modell_fliegt = 0; |
+ static int hoehenregler = 0; |
+ static char TimerWerteausgabe = 0; |
+ static char NeueKompassRichtungMerken = 0; |
+ Mittelwert(); |
+ |
+ GRN_ON; |
+ |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// Gaswert ermitteln |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+ GasMischanteil = PPM_in[EE_Parameter.Kanalbelegung[K_GAS]] + 120; |
+ if(GasMischanteil < 0) GasMischanteil = 0; |
+ |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// Emfang schlecht |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+ if(SenderOkay < 100) |
+ { |
+ if(!PcZugriff) beeptime = 500; |
+ if(RcLostTimer) RcLostTimer--; |
+ else |
+ { |
+ MotorenEin = 0; |
+ Notlandung = 0; |
+ } |
+ ROT_ON; |
+ if(modell_fliegt > 2000) // wahrscheinlich in der Luft --> langsam absenken |
+ { |
+ GasMischanteil = EE_Parameter.NotGas; |
+ Notlandung = 1; |
+ PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] = 0; |
+ PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] = 0; |
+ PPM_in[EE_Parameter.Kanalbelegung[K_GIER]] = 0; |
+/* Poti1 = 65; |
+ Poti2 = 48; |
+ Poti3 = 0; |
+*/ } |
+ else MotorenEin = 0; |
+ } |
+ else |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// Emfang gut |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+ if(SenderOkay > 140) |
+ { |
+ Notlandung = 0; |
+ RcLostTimer = EE_Parameter.NotGasZeit * 50; |
+ if(GasMischanteil > 40) |
+ { |
+ if(modell_fliegt < 0xffff) modell_fliegt++; |
+ } |
+ if((modell_fliegt < 200) || (GasMischanteil < 40)) |
+ { |
+ SummeNick = 0; |
+ SummeRoll = 0; |
+ Mess_Integral_Gier = 0; |
+ Mess_Integral_Gier2 = 0; |
+ } |
+ if((GasMischanteil > 200) && MotorenEin == 0) |
+ { |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// auf Nullwerte kalibrieren |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+ if(PPM_in[EE_Parameter.Kanalbelegung[K_GIER]] > 75) // Neutralwerte |
+ { |
+ unsigned char setting; |
+ if(++delay_neutral > 200) // nicht sofort |
+ { |
+ GRN_OFF; |
+ SetNeutral(); |
+ MotorenEin = 0; |
+ delay_neutral = 0; |
+ modell_fliegt = 0; |
+ if(PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] > 70 || abs(PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]]) > 70) |
+ { |
+ if(PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] > 70 && PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] < 70) setting = 1; |
+ if(PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] > 70 && PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] > 70) setting = 2; |
+ if(PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] < 70 && PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] > 70) setting = 3; |
+ if(PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] <-70 && PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] > 70) setting = 4; |
+ if(PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] <-70 && PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] < 70) setting = 5; |
+ eeprom_write_byte(&EEPromArray[EEPROM_ADR_ACTIVE_SET], setting); // aktiven Datensatz merken |
+ } |
+ ReadParameterSet(GetActiveParamSetNumber(), (unsigned char *) &EE_Parameter.Kanalbelegung[0], STRUCT_PARAM_LAENGE); |
+ Piep(GetActiveParamSetNumber()); |
+ if((EE_Parameter.GlobalConfig & CFG_HOEHENREGELUNG)) // Höhenregelung aktiviert? |
+ { |
+ if((MessLuftdruck > 950) || (MessLuftdruck < 750)) SucheLuftruckOffset(); |
+ } |
+ } |
+ } |
+ else delay_neutral = 0; |
+ } |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// Gas ist unten |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+ if(GasMischanteil < 35) |
+ { |
+ // Starten |
+ if(PPM_in[EE_Parameter.Kanalbelegung[K_GIER]] < -75) |
+ { |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// Einschalten |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+ if(++delay_einschalten > 200) |
+ { |
+ delay_einschalten = 200; |
+ modell_fliegt = 1; |
+ MotorenEin = 1; |
+ sollGier = 0; |
+ Mess_Integral_Gier = 0; |
+ Mess_Integral_Gier2 = 0; |
+ Mess_IntegralNick = 0; |
+ Mess_IntegralRoll = 0; |
+ Mess_IntegralNick2 = IntegralNick; |
+ Mess_IntegralRoll2 = IntegralRoll; |
+ SummeNick = 0; |
+ SummeRoll = 0; |
+ } |
+ } |
+ else delay_einschalten = 0; |
+ //Auf Neutralwerte setzen |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// Auschalten |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+ if(PPM_in[EE_Parameter.Kanalbelegung[K_GIER]] > 75) |
+ { |
+ if(++delay_ausschalten > 200) // nicht sofort |
+ { |
+ MotorenEin = 0; |
+ delay_ausschalten = 200; |
+ modell_fliegt = 0; |
+ } |
+ } |
+ else delay_ausschalten = 0; |
+ } |
+ } |
+ |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// neue Werte von der Funke |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+ if(!NewPpmData-- || Notlandung) |
+ { |
+ ParameterZuordnung(); |
+ StickNick = PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] * EE_Parameter.Stick_P; |
+ StickNick += PPM_diff[EE_Parameter.Kanalbelegung[K_NICK]] * EE_Parameter.Stick_D; |
+ StickRoll = PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] * EE_Parameter.Stick_P; |
+ StickRoll += PPM_diff[EE_Parameter.Kanalbelegung[K_ROLL]] * EE_Parameter.Stick_D; |
+ StickGier = -PPM_in[EE_Parameter.Kanalbelegung[K_GIER]]; |
+ |
+ GyroFaktor = ((float)Parameter_Gyro_P + 10.0) / 256.0; |
+ IntegralFaktor = ((float) Parameter_Gyro_I) / 44000; |
+ |
+ if(EE_Parameter.GlobalConfig & CFG_HEADING_HOLD) IntegralFaktor = 0; |
+ if(GyroFaktor < 0) GyroFaktor = 0; |
+ if(IntegralFaktor < 0) IntegralFaktor = 0; |
+ } |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// Bei Empfangsausfall im Flug |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+ if(Notlandung) |
+ { |
+ StickGier = 0; |
+ StickNick = 0; |
+ StickRoll = 0; |
+ GyroFaktor = 0.1; |
+ IntegralFaktor = 0.005; |
+ } |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// Gyro-Drift kompensieren |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+#define DRIFT_FAKTOR 3 |
+ if(ZaehlMessungen >= 1000 / DRIFT_FAKTOR) |
+ { |
+ IntegralFehlerNick = IntegralNick2 - IntegralNick; |
+ IntegralFehlerRoll = IntegralRoll2 - IntegralRoll; |
+ ZaehlMessungen = 0; |
+ if(IntegralFehlerNick > 500/DRIFT_FAKTOR) AdNeutralNick++; |
+ if(IntegralFehlerNick < -500/DRIFT_FAKTOR) AdNeutralNick--; |
+ if(IntegralFehlerRoll > 500/DRIFT_FAKTOR) AdNeutralRoll++; |
+ if(IntegralFehlerRoll < -500/DRIFT_FAKTOR) AdNeutralRoll--; |
+ //if(Mess_Integral_Gier2 > 500/DRIFT_FAKTOR) AdNeutralGier--; |
+ //if(Mess_Integral_Gier2 <-500/DRIFT_FAKTOR) AdNeutralGier++; |
+ ANALOG_OFF; // ADC ausschalten, damit die Werte sich nicht während der Berechnung ändern |
+ Mess_IntegralNick2 = IntegralNick; |
+ Mess_IntegralRoll2 = IntegralRoll; |
+ Mess_Integral_Gier2 = Integral_Gier; |
+ ANALOG_ON; // ADC einschalten |
+ } |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// Integrale auf ACC-Signal abgleichen |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+ tmp_long = (long)(IntegralNick / EE_Parameter.GyroAccFaktor - (long)Mittelwert_AccNick) / 16; |
+ tmp_long2 = (long)(IntegralRoll / EE_Parameter.GyroAccFaktor - (long)Mittelwert_AccRoll) / 16; |
+#define AUSGLEICH 500 |
+ if(tmp_long > AUSGLEICH) tmp_long = AUSGLEICH; |
+ if(tmp_long < -AUSGLEICH) tmp_long =-AUSGLEICH; |
+ if(tmp_long2 > AUSGLEICH) tmp_long2 = AUSGLEICH; |
+ if(tmp_long2 <-AUSGLEICH) tmp_long2 =-AUSGLEICH; |
+ ANALOG_OFF; // ADC ausschalten, damit die Werte sich nicht während der Berechnung ändern |
+ Mess_IntegralNick -= tmp_long; |
+ Mess_IntegralRoll -= tmp_long2; |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// Gieren |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+ sollGier = StickGier; |
+ if(abs(StickGier) > 35) |
+ { |
+ if(!(EE_Parameter.GlobalConfig & CFG_KOMPASS_FIX)) NeueKompassRichtungMerken = 1; |
+ } |
+ tmp_int = EE_Parameter.Gier_P * (sollGier * abs(sollGier)) / 256; // expo |
+ Mess_Integral_Gier -= tmp_int; |
+ if(Mess_Integral_Gier > 30000) Mess_Integral_Gier = 30000; // begrenzen |
+ if(Mess_Integral_Gier <-30000) Mess_Integral_Gier =-30000; |
+ |
+ ANALOG_ON; // ADC einschalten |
+ |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// Kompass |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+ if(KompassValue && (EE_Parameter.GlobalConfig & CFG_KOMPASS_AKTIV)) |
+ { |
+ if(NeueKompassRichtungMerken) |
+ { |
+ KompassStartwert = KompassValue; |
+ NeueKompassRichtungMerken = 0; |
+ } |
+ ANALOG_OFF; // ADC ausschalten, damit die Werte sich nicht während der Berechnung ändern |
+ Mess_Integral_Gier -= (KompassRichtung * Parameter_KompassWirkung) / 32; // nach Kompass ausrichten |
+ ANALOG_ON; // ADC einschalten |
+ } |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+ |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// Debugwerte zuordnen |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+DebugOut.Sekunden++; |
+ if(!TimerWerteausgabe--) |
+ { |
+ TimerWerteausgabe = 49; |
+// DebugOut.Analog[0] = MesswertNick; |
+// DebugOut.Analog[1] = MesswertRoll; |
+// DebugOut.Analog[2] = MesswertGier; |
+// DebugOut.Analog[0] = IntegralNick / EE_Parameter.GyroAccFaktor; |
+// DebugOut.Analog[1] = IntegralRoll / EE_Parameter.GyroAccFaktor; |
+/* |
+static signed int x_min,x_max,y_min,y_max,z_min,z_max; |
+ |
+if (MM3.x_axis > x_max) x_max = MM3.x_axis; |
+else if (MM3.x_axis < x_min) x_min = MM3.x_axis; |
+ |
+if (MM3.y_axis > y_max) y_max = MM3.y_axis; |
+else if (MM3.y_axis < y_min) y_min = MM3.y_axis; |
+ |
+if (MM3.z_axis > z_max) z_max = MM3.z_axis; |
+else if (MM3.z_axis < z_min) z_min = MM3.z_axis; |
+ |
+DebugOut.Analog[0] = x_max; |
+DebugOut.Analog[1] = x_min; |
+DebugOut.Analog[2] = y_max; |
+DebugOut.Analog[3] = y_min; |
+DebugOut.Analog[4] = z_max; |
+DebugOut.Analog[5] = z_min; |
+*/ |
+ DebugOut.Analog[0] = MM3.NickGrad; |
+ DebugOut.Analog[1] = MM3.RollGrad; |
+ DebugOut.Analog[2] = Mittelwert_AccNick; |
+ DebugOut.Analog[3] = Mittelwert_AccRoll; |
+ DebugOut.Analog[4] = MesswertGier; |
+ DebugOut.Analog[5] = HoehenWert; |
+ DebugOut.Analog[6] = (Mess_Integral_Hoch / 512); |
+ DebugOut.Analog[7] = GasMischanteil; |
+ DebugOut.Analog[8] = KompassValue; |
+ |
+//DebugOut.Analog[8] = MM3_heading(); |
+DebugOut.Analog[9] = MM3.x_axis; |
+DebugOut.Analog[10] = MM3.y_axis; |
+DebugOut.Analog[11] = MM3.z_axis; |
+ |
+// DebugOut.Analog[9] = SollHoehe; |
+// DebugOut.Analog[10] = Mess_Integral_Gier / 128; |
+// DebugOut.Analog[11] = KompassStartwert; |
+// DebugOut.Analog[10] = Parameter_Gyro_I; |
+// DebugOut.Analog[10] = EE_Parameter.Gyro_I; |
+// DebugOut.Analog[9] = KompassRichtung; |
+// DebugOut.Analog[10] = GasMischanteil; |
+// DebugOut.Analog[3] = HoeheD * 32; |
+// DebugOut.Analog[4] = hoehenregler; |
+ } |
+ |
+ |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// Drehgeschwindigkeit und -winkel zu einem Istwert zusammenfassen |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+ MesswertNick = IntegralNick * IntegralFaktor + MesswertNick * GyroFaktor; |
+ MesswertRoll = IntegralRoll * IntegralFaktor + MesswertRoll * GyroFaktor; |
+ MesswertGier = MesswertGier * (GyroFaktor/2) + Integral_Gier * IntegralFaktor; |
+ // Maximalwerte abfangen |
+ #define MAX_SENSOR 2048 |
+ if(MesswertNick > MAX_SENSOR) MesswertNick = MAX_SENSOR; |
+ if(MesswertNick < -MAX_SENSOR) MesswertNick = -MAX_SENSOR; |
+ if(MesswertRoll > MAX_SENSOR) MesswertRoll = MAX_SENSOR; |
+ if(MesswertRoll < -MAX_SENSOR) MesswertRoll = -MAX_SENSOR; |
+ if(MesswertGier > MAX_SENSOR) MesswertGier = MAX_SENSOR; |
+ if(MesswertGier < -MAX_SENSOR) MesswertGier = -MAX_SENSOR; |
+ |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// Höhenregelung |
+// Die Höhenregelung schwächt lediglich das Gas ab, erhöht es allerdings nicht |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+//OCR0B = 180 - (Poti1 + 120) / 4; |
+//DruckOffsetSetting = OCR0B; |
+ if((EE_Parameter.GlobalConfig & CFG_HOEHENREGELUNG)) // Höhenregelung |
+ { |
+ int tmp_int; |
+ if(EE_Parameter.GlobalConfig & CFG_HOEHEN_SCHALTER) // Regler wird über Schalter gesteuert |
+ { |
+ if(Parameter_MaxHoehe < 50) |
+ { |
+ SollHoehe = HoehenWert - 20; // Parameter_MaxHoehe ist der PPM-Wert des Schalters |
+ HoehenReglerAktiv = 0; |
+ } |
+ else |
+ HoehenReglerAktiv = 1; |
+ } |
+ else |
+ { |
+ SollHoehe = Parameter_MaxHoehe * EE_Parameter.Hoehe_Verstaerkung - 20; |
+ HoehenReglerAktiv = 1; |
+ } |
+ |
+ if(Notlandung) SollHoehe = 0; |
+ h = HoehenWert; |
+ if((h > SollHoehe) && HoehenReglerAktiv) // zu hoch --> drosseln |
+ { h = ((h - SollHoehe) * (int) Parameter_Hoehe_P) / 16; // Differenz bestimmen --> P-Anteil |
+ h = GasMischanteil - h; // vom Gas abziehen |
+ h -= (HoeheD * Parameter_Luftdruck_D)/8; // D-Anteil |
+ tmp_int = ((Mess_Integral_Hoch / 512) * (signed long) Parameter_Hoehe_ACC_Wirkung) / 32; |
+ if(tmp_int > 50) tmp_int = 50; |
+ else if(tmp_int < -50) tmp_int = -50; |
+ h -= tmp_int; |
+ hoehenregler = (hoehenregler*15 + h) / 16; |
+ if(hoehenregler < EE_Parameter.Hoehe_MinGas) // nicht unter MIN |
+ { |
+ if(GasMischanteil >= EE_Parameter.Hoehe_MinGas) hoehenregler = EE_Parameter.Hoehe_MinGas; |
+ if(GasMischanteil < EE_Parameter.Hoehe_MinGas) hoehenregler = GasMischanteil; |
+ } |
+ if(hoehenregler > GasMischanteil) hoehenregler = GasMischanteil; // nicht mehr als Gas |
+ GasMischanteil = hoehenregler; |
+ } |
+ } |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// + Mischer und PI-Regler |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+ |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// Gier-Anteil |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+ GierMischanteil = MesswertGier - sollGier; // Regler für Gier |
+ if(GierMischanteil > 100) GierMischanteil = 100; |
+ if(GierMischanteil < -100) GierMischanteil = -100; |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// Nick-Achse |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+ DiffNick = Kp * (MesswertNick - (StickNick - GPS_Nick)); // Differenz bestimmen |
+ SummeNick += DiffNick; // I-Anteil |
+ if(SummeNick > 0) SummeNick-= (abs(SummeNick)/256 + 1); else SummeNick += abs(SummeNick)/256 + 1; |
+ if(SummeNick > 16000) SummeNick = 16000; |
+ if(SummeNick < -16000) SummeNick = -16000; |
+ pd_ergebnis = DiffNick + Ki * SummeNick; // PI-Regler für Nick |
+ // Motor Vorn |
+ motorwert = GasMischanteil + pd_ergebnis + GierMischanteil; // Mischer |
+ if ((motorwert < 0) | (GasMischanteil < 10)) motorwert = 0; |
+ else if(motorwert > MAX_GAS) motorwert = MAX_GAS; |
+ if (motorwert < MIN_GAS) motorwert = MIN_GAS; |
+ Motor_Vorne = motorwert; |
+ // Motor Heck |
+ motorwert = GasMischanteil - pd_ergebnis + GierMischanteil; |
+ if ((motorwert < 0) | (GasMischanteil < 10)) motorwert = 0; |
+ else if(motorwert > MAX_GAS) motorwert = MAX_GAS; |
+ if (motorwert < MIN_GAS) motorwert = MIN_GAS; |
+ Motor_Hinten = motorwert; |
+ |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// Roll-Achse |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+ DiffRoll = Kp * (MesswertRoll - (StickRoll - GPS_Roll)); // Differenz bestimmen |
+ SummeRoll += DiffRoll; // I-Anteil |
+ if(SummeRoll > 0) SummeRoll-= (abs(SummeRoll)/256 + 1); else SummeRoll += abs(SummeRoll)/256 + 1; |
+ if(SummeRoll > 16000) SummeRoll = 16000; |
+ if(SummeRoll < -16000) SummeRoll = -16000; |
+ pd_ergebnis = DiffRoll + Ki * SummeRoll; // PI-Regler für Roll |
+ // Motor Links |
+ motorwert = GasMischanteil + pd_ergebnis - GierMischanteil; |
+ if ((motorwert < 0) | (GasMischanteil < 10)) motorwert = 0; |
+ else if(motorwert > MAX_GAS) motorwert = MAX_GAS; |
+ if (motorwert < MIN_GAS) motorwert = MIN_GAS; |
+ Motor_Links = motorwert; |
+ // Motor Rechts |
+ motorwert = GasMischanteil - pd_ergebnis - GierMischanteil; |
+ if ((motorwert < 0) | (GasMischanteil < 10)) motorwert = 0; |
+ else if(motorwert > MAX_GAS) motorwert = MAX_GAS; |
+ if (motorwert < MIN_GAS) motorwert = MIN_GAS; |
+ Motor_Rechts = motorwert; |
+ // +++++++++++++++++++++++++++++++++++++++++++++++ |
+ |
+} |
+ |
/branches/v0.60_MicroMag3_Nick666/Neigung mit Acc/fc.h |
---|
0,0 → 1,109 |
/*####################################################################################### |
Flight Control |
#######################################################################################*/ |
#ifndef _FC_H |
#define _FC_H |
extern volatile unsigned char Timeout; |
extern unsigned char Sekunde,Minute; |
extern volatile long IntegralNick,IntegralNick2; |
extern volatile long IntegralRoll,IntegralRoll2; |
extern volatile long Mess_IntegralNick,Mess_IntegralNick2; |
extern volatile long Mess_IntegralRoll,Mess_IntegralRoll2; |
extern volatile long Mess_Integral_Hoch; |
extern volatile long Integral_Gier,Mess_Integral_Gier,Mess_Integral_Gier2; |
extern volatile int KompassValue; |
extern volatile int KompassStartwert; |
extern volatile int KompassRichtung; |
extern int HoehenWert; |
extern int SollHoehe; |
extern volatile int MesswertNick,MesswertRoll,MesswertGier; |
extern volatile int AdNeutralNick,AdNeutralRoll,AdNeutralGier, Mittelwert_AccNick, Mittelwert_AccRoll; |
extern volatile int NeutralAccX, NeutralAccY,Mittelwert_AccHoch; |
extern volatile float NeutralAccZ; |
void MotorRegler(void); |
void SendMotorData(void); |
void CalibrierMittelwert(void); |
void Mittelwert(void); |
void SetNeutral(void); |
void Piep(unsigned char Anzahl); |
void DefaultKonstanten1(void); |
void DefaultKonstanten2(void); |
unsigned char h,m,s; |
volatile unsigned char Timeout ; |
unsigned char CosinusNickWinkel, CosinusRollWinkel; |
volatile long IntegralNick,IntegralNick2; |
volatile long IntegralRoll,IntegralRoll2; |
volatile long Integral_Gier; |
volatile long Mess_IntegralNick,Mess_IntegralNick2; |
volatile long Mess_IntegralRoll,Mess_IntegralRoll2; |
volatile long Mess_Integral_Gier; |
volatile int DiffNick,DiffRoll; |
extern int Poti1, Poti2, Poti3, Poti4; |
volatile unsigned char Motor_Vorne,Motor_Hinten,Motor_Rechts,Motor_Links, Count; |
unsigned char MotorWert[5]; |
volatile unsigned char SenderOkay; |
int StickNick,StickRoll,StickGier; |
char MotorenEin; |
extern void DefaultKonstanten(void); |
#define STRUCT_PARAM_LAENGE 58 |
struct mk_param_struct |
{ |
unsigned char Kanalbelegung[8]; // GAS[0], GIER[1],NICK[2], ROLL[3], POTI1, POTI2, POTI3 |
unsigned char GlobalConfig; // 0x01=Höhenregler aktiv,0x02=Kompass aktiv, 0x04=GPS aktiv, 0x08=Heading Hold aktiv |
unsigned char Hoehe_MinGas; // Wert : 0-100 |
unsigned char Luftdruck_D; // Wert : 0-250 |
unsigned char MaxHoehe; // Wert : 0-32 |
unsigned char Hoehe_P; // Wert : 0-32 |
unsigned char Hoehe_Verstaerkung; // Wert : 0-50 |
unsigned char Hoehe_ACC_Wirkung; // Wert : 0-250 |
unsigned char Stick_P; // Wert : 1-6 |
unsigned char Stick_D; // Wert : 0-64 |
unsigned char Gier_P; // Wert : 1-20 |
unsigned char Gas_Min; // Wert : 0-32 |
unsigned char Gas_Max; // Wert : 33-250 |
unsigned char GyroAccFaktor; // Wert : 1-64 |
unsigned char KompassWirkung; // Wert : 0-32 |
unsigned char Gyro_P; // Wert : 10-250 |
unsigned char Gyro_I; // Wert : 0-250 |
unsigned char UnterspannungsWarnung; // Wert : 0-250 |
unsigned char NotGas; // Wert : 0-250 //Gaswert bei Empängsverlust |
unsigned char NotGasZeit; // Wert : 0-250 // Zeitbis auf NotGas geschaltet wird, wg. Rx-Problemen |
unsigned char UfoAusrichtung; // X oder + Formation |
unsigned char I_Faktor; // Wert : 0-250 |
unsigned char UserParam1; // Wert : 0-250 |
unsigned char UserParam2; // Wert : 0-250 |
unsigned char UserParam3; // Wert : 0-250 |
unsigned char UserParam4; // Wert : 0-250 |
unsigned char ServoNickControl; // Wert : 0-250 // Stellung des Servos |
unsigned char ServoNickComp; // Wert : 0-250 // Einfluss Gyro/Servo |
unsigned char ServoNickMin; // Wert : 0-250 // Anschlag |
unsigned char ServoNickMax; // Wert : 0-250 // Anschlag |
unsigned char ServoNickRefresh; // Wert : 0-250 // Richtung Einfluss Gyro/Servo |
unsigned char ServoNickCompInvert; // Wert : 0-250 // Richtung Einfluss Gyro/Servo |
unsigned char Reserved[7]; |
char Name[12]; |
}; |
extern struct mk_param_struct EE_Parameter; |
extern unsigned char Parameter_Luftdruck_D; |
extern unsigned char Parameter_MaxHoehe; |
extern unsigned char Parameter_Hoehe_P; |
extern unsigned char Parameter_Hoehe_ACC_Wirkung; |
extern unsigned char Parameter_KompassWirkung; |
extern unsigned char Parameter_Gyro_P; |
extern unsigned char Parameter_Gyro_I; |
extern unsigned char Parameter_Gier_P; |
extern unsigned char Parameter_ServoNickControl; |
#endif //_FC_H |
/branches/v0.60_MicroMag3_Nick666/Neigung mit Acc/flight.pnproj |
---|
0,0 → 1,0 |
<Project name="Flight-Ctrl"><File path="uart.h"></File><File path="main.c"></File><File path="main.h"></File><File path="makefile"></File><File path="uart.c"></File><File path="printf_P.h"></File><File path="printf_P.c"></File><File path="timer0.c"></File><File path="timer0.h"></File><File path="old_macros.h"></File><File path="twimaster.c"></File><File path="version.txt"></File><File path="twimaster.h"></File><File path="rc.c"></File><File path="rc.h"></File><File path="fc.h"></File><File path="fc.c"></File><File path="menu.h"></File><File path="menu.c"></File><File path="_Settings.h"></File><File path="analog.c"></File><File path="analog.h"></File><File path="GPS.c"></File><File path="gps.h"></File><File path="License.txt"></File><File path="math.c"></File><File path="math.h"></File><File path="compass.c"></File><File path="compass.h"></File></Project> |
/branches/v0.60_MicroMag3_Nick666/Neigung mit Acc/flight.pnps |
---|
0,0 → 1,0 |
<pd><ViewState><e p="Flight-Ctrl" x="true"></e></ViewState></pd> |
/branches/v0.60_MicroMag3_Nick666/Neigung mit Acc/gps.h |
---|
0,0 → 1,4 |
extern signed int GPS_Nick; |
extern signed int GPS_Roll; |
extern void GPS_Neutral(void); |
extern void GPS_BerechneZielrichtung(void); |
/branches/v0.60_MicroMag3_Nick666/Neigung mit Acc/license_buss.txt |
---|
0,0 → 1,52 |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Copyright (c) 04.2007 Holger Buss |
// + Nur für den privaten Gebrauch |
// + www.MikroKopter.com |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Es gilt für das gesamte Projekt (Hardware, Software, Binärfiles, Sourcecode und Dokumentation), |
// + dass eine Nutzung (auch auszugsweise) nur für den privaten und nichtkommerziellen Gebrauch zulässig ist. |
// + Sollten direkte oder indirekte kommerzielle Absichten verfolgt werden, ist mit uns (info@mikrokopter.de) Kontakt |
// + bzgl. der Nutzungsbedingungen aufzunehmen. |
// + Eine kommerzielle Nutzung ist z.B.Verkauf von MikroKoptern, Bestückung und Verkauf von Platinen oder Bausätzen, |
// + Verkauf von Luftbildaufnahmen, usw. |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Werden Teile des Quellcodes (mit oder ohne Modifikation) weiterverwendet oder veröffentlicht, |
// + unterliegen sie auch diesen Nutzungsbedingungen und diese Nutzungsbedingungen incl. Copyright müssen dann beiliegen |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Sollte die Software (auch auszugesweise) oder sonstige Informationen des MikroKopter-Projekts |
// + auf anderen Webseiten oder sonstigen Medien veröffentlicht werden, muss unsere Webseite "http://www.mikrokopter.de" |
// + eindeutig als Ursprung verlinkt und genannt werden |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Keine Gewähr auf Fehlerfreiheit, Vollständigkeit oder Funktion |
// + Benutzung auf eigene Gefahr |
// + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Die Portierung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur |
// + mit unserer Zustimmung zulässig |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Redistributions of source code (with or without modifications) must retain the above copyright notice, |
// + this list of conditions and the following disclaimer. |
// + * Neither the name of the copyright holders nor the names of contributors may be used to endorse or promote products derived |
// + from this software without specific prior written permission. |
// + * The use of this project (hardware, software, binary files, sources and documentation) is only permittet |
// + for non-profit use (directly or indirectly) |
// + Commercial use (for excample: selling of MikroKopters, selling of PCBs, assembly, ...) is only permitted |
// + with our written permission |
// + * If sources or documentations are redistributet, our webpage (http://www.MikroKopter.de) must be |
// + clearly linked and named as origin |
// + * porting to systems other than hardware from www.mikrokopter.de is not allowed |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
// + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
// + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
// + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
// + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
// + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
// + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
// + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
// + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
// + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
// + POSSIBILITY OF SUCH DAMAGE. |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
/branches/v0.60_MicroMag3_Nick666/Neigung mit Acc/main.c |
---|
0,0 → 1,213 |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Copyright (c) 04.2007 Holger Buss |
// + Nur für den privaten Gebrauch |
// + www.MikroKopter.com |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Es gilt für das gesamte Projekt (Hardware, Software, Binärfiles, Sourcecode und Dokumentation), |
// + dass eine Nutzung (auch auszugsweise) nur für den privaten und nicht-kommerziellen Gebrauch zulässig ist. |
// + Sollten direkte oder indirekte kommerzielle Absichten verfolgt werden, ist mit uns (info@mikrokopter.de) Kontakt |
// + bzgl. der Nutzungsbedingungen aufzunehmen. |
// + Eine kommerzielle Nutzung ist z.B.Verkauf von MikroKoptern, Bestückung und Verkauf von Platinen oder Bausätzen, |
// + Verkauf von Luftbildaufnahmen, usw. |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Werden Teile des Quellcodes (mit oder ohne Modifikation) weiterverwendet oder veröffentlicht, |
// + unterliegen sie auch diesen Nutzungsbedingungen und diese Nutzungsbedingungen incl. Copyright müssen dann beiliegen |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Sollte die Software (auch auszugesweise) oder sonstige Informationen des MikroKopter-Projekts |
// + auf anderen Webseiten oder Medien veröffentlicht werden, muss unsere Webseite "http://www.mikrokopter.de" |
// + eindeutig als Ursprung verlinkt und genannt werden |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Keine Gewähr auf Fehlerfreiheit, Vollständigkeit oder Funktion |
// + Benutzung auf eigene Gefahr |
// + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Die Portierung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur |
// + mit unserer Zustimmung zulässig |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Redistributions of source code (with or without modifications) must retain the above copyright notice, |
// + this list of conditions and the following disclaimer. |
// + * Neither the name of the copyright holders nor the names of contributors may be used to endorse or promote products derived |
// + from this software without specific prior written permission. |
// + * The use of this project (hardware, software, binary files, sources and documentation) is only permittet |
// + for non-commercial use (directly or indirectly) |
// + Commercial use (for excample: selling of MikroKopters, selling of PCBs, assembly, ...) is only permitted |
// + with our written permission |
// + * If sources or documentations are redistributet on other webpages, out webpage (http://www.MikroKopter.de) must be |
// + clearly linked as origin |
// + * porting to systems other than hardware from www.mikrokopter.de is not allowed |
// + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
// + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
// + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
// + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
// + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
// + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
// + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
// + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
// + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
// + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
// + POSSIBILITY OF SUCH DAMAGE. |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
#include "main.h" |
unsigned char EEPromArray[E2END+1] EEMEM; |
// -- Parametersatz aus EEPROM lesen --- |
// number [0..5] |
void ReadParameterSet(unsigned char number, unsigned char *buffer, unsigned char length) |
{ |
if (number > 5) number = 5; |
eeprom_read_block(buffer, &EEPromArray[EEPROM_ADR_PARAM_BEGIN + length * number], length); |
} |
// -- Parametersatz ins EEPROM schreiben --- |
// number [0..5] |
void WriteParameterSet(unsigned char number, unsigned char *buffer, unsigned char length) |
{ |
if (number > 5) number = 5; |
eeprom_write_block(buffer, &EEPromArray[EEPROM_ADR_PARAM_BEGIN + length * number], length); |
eeprom_write_byte(&EEPromArray[EEPROM_ADR_ACTIVE_SET], number); // diesen Parametersatz als aktuell merken |
} |
unsigned char GetActiveParamSetNumber(void) |
{ |
return(eeprom_read_byte(&EEPromArray[EEPROM_ADR_ACTIVE_SET])); |
} |
//############################################################################ |
//Hauptprogramm |
int main (void) |
//############################################################################ |
{ |
unsigned int timer; |
unsigned int timer2 = 0; |
DDRC = 0x01; // SCL |
PORTC = 0xff; // Pullup SDA |
DDRB = 0x1B; // LEDs und Druckoffset |
PORTB |= (1<<PB0); // LED_Rot |
DDRD = 0x3E; // Speaker & TXD & J3 J4 J5 |
DDRD |= (1<<PD7); // J7 |
PORTD = 0xF7; |
MCUSR &=~(1<<WDRF); |
WDTCSR |= (1<<WDCE)|(1<<WDE); |
WDTCSR = 0; |
beeptime = 2000; |
StickGier = 0; PPM_in[K_GAS] = 0;StickRoll = 0; StickNick = 0; |
ROT_OFF; |
Timer_Init(); |
UART_Init(); |
rc_sum_init(); |
ADC_Init(); |
i2c_init(); |
init_spi(); |
sei(); |
VersionInfo.Hauptversion = VERSION_HAUPTVERSION; |
VersionInfo.Nebenversion = VERSION_NEBENVERSION; |
VersionInfo.PCKompatibel = VERSION_KOMPATIBEL; |
printf("\n\rFlightControl V%d.%d ", VERSION_HAUPTVERSION, VERSION_NEBENVERSION); |
printf("\n\r=============================="); |
GRN_ON; |
if(eeprom_read_byte(&EEPromArray[EEPROM_ADR_VALID]) != 59) // seit V 0.60 |
{ |
printf("\n\rInit. EEPROM: Generiere Default-Parameter..."); |
DefaultKonstanten1(); |
for (unsigned char i=0;i<6;i++) |
{ |
if(i==2) DefaultKonstanten2(); |
WriteParameterSet(i, (unsigned char *) &EE_Parameter.Kanalbelegung[0], STRUCT_PARAM_LAENGE); |
} |
eeprom_write_byte(&EEPromArray[EEPROM_ADR_ACTIVE_SET], 1); |
eeprom_write_byte(&EEPromArray[EEPROM_ADR_VALID], 59); |
} |
ReadParameterSet(GetActiveParamSetNumber(), (unsigned char *) &EE_Parameter.Kanalbelegung[0], STRUCT_PARAM_LAENGE); |
printf("\n\rBenutze Parametersatz %d", GetActiveParamSetNumber()); |
if(EE_Parameter.GlobalConfig & CFG_HOEHENREGELUNG) |
{ |
printf("\n\rAbgleich Luftdrucksensor.."); |
timer = SetDelay(2500); |
SucheLuftruckOffset(); |
while (!CheckDelay(timer)); |
printf("OK\n\r"); |
} |
SetNeutral(); |
ROT_OFF; |
beeptime = 2000; |
DebugIn.Analog[1] = 1000; |
DebugIn.Digital[0] = 0x55; |
printf("\n\rSteuerung: "); |
if (EE_Parameter.GlobalConfig & CFG_HEADING_HOLD) printf("HeadingHold"); |
else printf("Neutral"); |
printf("\n\n\r"); |
LcdClear(); |
while (1) |
{ |
if (UpdateMotor) // ReglerIntervall |
{ |
UpdateMotor=0; |
MotorRegler(); |
SendMotorData(); |
ROT_OFF; |
if(PcZugriff) PcZugriff--; |
if(SenderOkay) SenderOkay--; |
if (UBat < EE_Parameter.UnterspannungsWarnung) |
{ |
beeptime = 2000; |
} |
if(!Timeout) |
{ |
i2c_init(); |
} |
else |
{ |
ROT_OFF; |
} |
} |
if(SIO_DEBUG) |
{ |
DatenUebertragung(); |
BearbeiteRxDaten(); |
} |
else BearbeiteRxDaten(); |
if(CheckDelay(timer2)) |
{ |
if(MotorenEin) PORTC ^= 0x10; else PORTC &= ~0x10; |
timer = SetDelay(500); |
} |
} |
return (1); |
} |
/branches/v0.60_MicroMag3_Nick666/Neigung mit Acc/main.h |
---|
0,0 → 1,94 |
#ifndef _MAIN_H |
#define _MAIN_H |
//Hier die Quarz Frequenz einstellen |
#if defined (__AVR_ATmega32__) |
#define SYSCLK 20000000L //Quarz Frequenz in Hz |
#endif |
#if defined (__AVR_ATmega644__) |
#define SYSCLK 20000000L //Quarz Frequenz in Hz |
//#define SYSCLK 16000000L //Quarz Frequenz in Hz |
#endif |
// neue Hardware |
#define ROT_OFF PORTB &=~(1<<PB0) |
#define ROT_ON PORTB |= (1<<PB0) |
#define ROT_FLASH PORTB ^= (1<<PB0) |
#define GRN_OFF PORTB &=~(1<<PB1) |
#define GRN_ON PORTB |= (1<<PB1) |
#define GRN_FLASH PORTD ^= (1<<PB1) |
//#ifndef F_CPU |
//#error ################## F_CPU nicht definiert oder ungültig ############# |
//#endif |
//+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
//#define ANZ_MITTELWERT 4 |
#define EEPROM_ADR_VALID 1 |
#define EEPROM_ADR_ACTIVE_SET 2 |
#define EEPROM_ADR_PARAM_BEGIN 100 |
#define CFG_HOEHENREGELUNG 0x01 |
#define CFG_HOEHEN_SCHALTER 0x02 |
#define CFG_HEADING_HOLD 0x04 |
#define CFG_KOMPASS_AKTIV 0x08 |
#define CFG_KOMPASS_FIX 0x10 |
#define CFG_GPS_AKTIV 0x20 |
//#define SYSCLK |
//extern unsigned long SYSCLK; |
extern volatile int i_Nick[20],i_Roll[20],DiffNick,DiffRoll; |
extern volatile unsigned char SenderOkay; |
extern unsigned char CosinusNickWinkel, CosinusRollWinkel; |
extern void ReadParameterSet (unsigned char number, unsigned char *buffer, unsigned char length); |
extern void WriteParameterSet(unsigned char number, unsigned char *buffer, unsigned char length); |
extern unsigned char GetActiveParamSetNumber(void); |
extern unsigned char EEPromArray[]; |
#include <stdlib.h> |
#include <string.h> |
#include <avr/io.h> |
#include <avr/pgmspace.h> |
#include <avr/interrupt.h> |
#include <avr/eeprom.h> |
#include <avr/boot.h> |
#include <avr/wdt.h> |
#include "old_macros.h" |
#include "_settings.h" |
#include "printf_P.h" |
#include "compass.h" |
#include "timer0.h" |
#include "uart.h" |
#include "analog.h" |
#include "twimaster.h" |
#include "menu.h" |
#include "rc.h" |
#include "fc.h" |
#include "gps.h" |
#include "math.h" |
#ifndef EEMEM |
#define EEMEM __attribute__ ((section (".eeprom"))) |
#endif |
#define DEBUG_DISPLAY_INTERVALL 123 // in ms |
#define DELAY_US(x) ((unsigned int)( (x) * 1e-6 * F_CPU )) |
#endif //_MAIN_H |
/branches/v0.60_MicroMag3_Nick666/Neigung mit Acc/makefile |
---|
0,0 → 1,392 |
#-------------------------------------------------------------------- |
# MCU name |
MCU = atmega644 |
F_CPU = 20000000 |
#------------------------------------------------------------------- |
HAUPT_VERSION = 0 |
NEBEN_VERSION = 60 |
VERSION_KOMPATIBEL = 4 # PC-Kompatibilität |
#------------------------------------------------------------------- |
ifeq ($(MCU), atmega32) |
# FUSE_SETTINGS= -u -U lfuse:w:0xff:m -U hfuse:w:0xcf:m |
HEX_NAME = MEGA32 |
endif |
ifeq ($(MCU), atmega644) |
FUSE_SETTINGS = -u -U lfuse:w:0xff:m -U hfuse:w:0xdf:m |
#FUSE_SETTINGS = -U lfuse:w:0xff:m -U hfuse:w:0xdf:m |
# -u bei neuen Controllern wieder einspielen |
HEX_NAME = MEGA644 |
endif |
ifeq ($(F_CPU), 16000000) |
QUARZ = 16MHZ |
endif |
ifeq ($(F_CPU), 20000000) |
QUARZ = 20MHZ |
endif |
# Output format. (can be srec, ihex, binary) |
FORMAT = ihex |
# Target file name (without extension). |
TARGET = Flight-Ctrl_$(HEX_NAME)_V$(HAUPT_VERSION)_$(NEBEN_VERSION) |
# Optimization level, can be [0, 1, 2, 3, s]. 0 turns off optimization. |
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) |
OPT = s |
########################################################################################################## |
# List C source files here. (C dependencies are automatically generated.) |
SRC = main.c uart.c printf_P.c timer0.c analog.c menu.c compass.c math.c |
SRC += twimaster.c rc.c fc.c GPS.c |
########################################################################################################## |
# List Assembler source files here. |
# Make them always end in a capital .S. Files ending in a lowercase .s |
# will not be considered source files but generated files (assembler |
# output from the compiler), and will be deleted upon "make clean"! |
# Even though the DOS/Win* filesystem matches both .s and .S the same, |
# it will preserve the spelling of the filenames, and gcc itself does |
# care about how the name is spelled on its command-line. |
ASRC = |
# List any extra directories to look for include files here. |
# Each directory must be seperated by a space. |
EXTRAINCDIRS = |
# Optional compiler flags. |
# -g: generate debugging information (for GDB, or for COFF conversion) |
# -O*: optimization level |
# -f...: tuning, see gcc manual and avr-libc documentation |
# -Wall...: warning level |
# -Wa,...: tell GCC to pass this to the assembler. |
# -ahlms: create assembler listing |
CFLAGS = -O$(OPT) \ |
-funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums \ |
-Wall -Wstrict-prototypes \ |
-mtiny-stack -mcall-prologues \ |
-Wa,-adhlns=$(<:.c=.lst) \ |
$(patsubst %,-I%,$(EXTRAINCDIRS)) |
# Set a "language standard" compiler flag. |
# Unremark just one line below to set the language standard to use. |
# gnu99 = C99 + GNU extensions. See GCC manual for more information. |
#CFLAGS += -std=c89 |
#CFLAGS += -std=gnu89 |
#CFLAGS += -std=c99 |
CFLAGS += -std=gnu99 |
CFLAGS += -DVERSION_HAUPTVERSION=$(HAUPT_VERSION) -DVERSION_NEBENVERSION=$(NEBEN_VERSION) -DVERSION_KOMPATIBEL=$(VERSION_KOMPATIBEL) |
# Optional assembler flags. |
# -Wa,...: tell GCC to pass this to the assembler. |
# -ahlms: create listing |
# -gstabs: have the assembler create line number information; note that |
# for use in COFF files, additional information about filenames |
# and function names needs to be present in the assembler source |
# files -- see avr-libc docs [FIXME: not yet described there] |
ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs |
# Optional linker flags. |
# -Wl,...: tell GCC to pass this to linker. |
# -Map: create map file |
# --cref: add cross reference to map file |
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref |
# Additional libraries |
# Minimalistic printf version |
#LDFLAGS += -Wl,-u,vfprintf -lprintf_min |
# Floating point printf version (requires -lm below) |
#LDFLAGS += -Wl,-u,vfprintf -lprintf_flt |
# -lm = math library |
LDFLAGS += -lm |
##LDFLAGS += -T./linkerfile/avr5.x |
# Programming support using avrdude. Settings and variables. |
# Programming hardware: alf avr910 avrisp bascom bsd |
# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500 |
# |
# Type: avrdude -c ? |
# to get a full listing. |
# |
#AVRDUDE_PROGRAMMER = stk200 |
AVRDUDE_PROGRAMMER = dt006 |
#AVRDUDE_PROGRAMMER = ponyser |
#falls Ponyser ausgewählt wird, muss sich unsere avrdude-Configdatei im Bin-Verzeichnis des Compilers befinden |
#AVRDUDE_PORT = com1 # programmer connected to serial device |
AVRDUDE_PORT = lpt1 # programmer connected to parallel port |
#AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex |
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex $(FUSE_SETTINGS) |
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep |
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) |
# Uncomment the following if you want avrdude's erase cycle counter. |
# Note that this counter needs to be initialized first using -Yn, |
# see avrdude manual. |
#AVRDUDE_ERASE += -y |
# Uncomment the following if you do /not/ wish a verification to be |
# performed after programming the device. |
AVRDUDE_FLAGS += -V |
# Increase verbosity level. Please use this when submitting bug |
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> |
# to submit bug reports. |
#AVRDUDE_FLAGS += -v -v |
# --------------------------------------------------------------------------- |
# Define directories, if needed. |
DIRAVR = c:/winavr |
DIRAVRBIN = $(DIRAVR)/bin |
DIRAVRUTILS = $(DIRAVR)/utils/bin |
DIRINC = . |
DIRLIB = $(DIRAVR)/avr/lib |
# Define programs and commands. |
SHELL = sh |
CC = avr-gcc |
OBJCOPY = avr-objcopy |
OBJDUMP = avr-objdump |
SIZE = avr-size |
# Programming support using avrdude. |
AVRDUDE = avrdude |
REMOVE = rm -f |
COPY = cp |
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex |
ELFSIZE = $(SIZE) -A $(TARGET).elf |
# Define Messages |
# English |
MSG_ERRORS_NONE = Errors: none |
MSG_BEGIN = -------- begin -------- |
MSG_END = -------- end -------- |
MSG_SIZE_BEFORE = Size before: |
MSG_SIZE_AFTER = Size after: |
MSG_COFF = Converting to AVR COFF: |
MSG_EXTENDED_COFF = Converting to AVR Extended COFF: |
MSG_FLASH = Creating load file for Flash: |
MSG_EEPROM = Creating load file for EEPROM: |
MSG_EXTENDED_LISTING = Creating Extended Listing: |
MSG_SYMBOL_TABLE = Creating Symbol Table: |
MSG_LINKING = Linking: |
MSG_COMPILING = Compiling: |
MSG_ASSEMBLING = Assembling: |
MSG_CLEANING = Cleaning project: |
# Define all object files. |
OBJ = $(SRC:.c=.o) $(ASRC:.S=.o) |
# Define all listing files. |
LST = $(ASRC:.S=.lst) $(SRC:.c=.lst) |
# Combine all necessary flags and optional flags. |
# Add target processor to flags. |
#ALL_CFLAGS = -mmcu=$(MCU) -DF_CPU=$(F_CPU) -I. $(CFLAGS) |
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) |
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) |
# Default target. |
all: begin gccversion sizebefore $(TARGET).elf $(TARGET).hex $(TARGET).eep \ |
$(TARGET).lss $(TARGET).sym sizeafter finished end |
# Eye candy. |
# AVR Studio 3.x does not check make's exit code but relies on |
# the following magic strings to be generated by the compile job. |
begin: |
@echo |
@echo $(MSG_BEGIN) |
finished: |
@echo $(MSG_ERRORS_NONE) |
end: |
@echo $(MSG_END) |
@echo |
# Display size of file. |
sizebefore: |
@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); echo; fi |
sizeafter: |
@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi |
# Display compiler version information. |
gccversion : |
@$(CC) --version |
# Convert ELF to COFF for use in debugging / simulating in |
# AVR Studio or VMLAB. |
COFFCONVERT=$(OBJCOPY) --debugging \ |
--change-section-address .data-0x800000 \ |
--change-section-address .bss-0x800000 \ |
--change-section-address .noinit-0x800000 \ |
--change-section-address .eeprom-0x810000 |
coff: $(TARGET).elf |
@echo |
@echo $(MSG_COFF) $(TARGET).cof |
$(COFFCONVERT) -O coff-avr $< $(TARGET).cof |
extcoff: $(TARGET).elf |
@echo |
@echo $(MSG_EXTENDED_COFF) $(TARGET).cof |
$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof |
# Program the device. |
program: $(TARGET).hex $(TARGET).eep |
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) |
# Create final output files (.hex, .eep) from ELF output file. |
%.hex: %.elf |
@echo |
@echo $(MSG_FLASH) $@ |
$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@ |
%.eep: %.elf |
@echo |
@echo $(MSG_EEPROM) $@ |
-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ |
--change-section-lma .eeprom=0 -O $(FORMAT) $< $@ |
# Create extended listing file from ELF output file. |
%.lss: %.elf |
@echo |
@echo $(MSG_EXTENDED_LISTING) $@ |
$(OBJDUMP) -h -S $< > $@ |
# Create a symbol table from ELF output file. |
%.sym: %.elf |
@echo |
@echo $(MSG_SYMBOL_TABLE) $@ |
avr-nm -n $< > $@ |
# Link: create ELF output file from object files. |
.SECONDARY : $(TARGET).elf |
.PRECIOUS : $(OBJ) |
%.elf: $(OBJ) |
@echo |
@echo $(MSG_LINKING) $@ |
$(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS) |
# Compile: create object files from C source files. |
%.o : %.c |
@echo |
@echo $(MSG_COMPILING) $< |
$(CC) -c $(ALL_CFLAGS) $< -o $@ |
# Compile: create assembler files from C source files. |
%.s : %.c |
$(CC) -S $(ALL_CFLAGS) $< -o $@ |
# Assemble: create object files from assembler source files. |
%.o : %.S |
@echo |
@echo $(MSG_ASSEMBLING) $< |
$(CC) -c $(ALL_ASFLAGS) $< -o $@ |
# Target: clean project. |
clean: begin clean_list finished end |
clean_list : |
@echo |
@echo $(MSG_CLEANING) |
# $(REMOVE) $(TARGET).hex |
$(REMOVE) $(TARGET).eep |
$(REMOVE) $(TARGET).obj |
$(REMOVE) $(TARGET).cof |
$(REMOVE) $(TARGET).elf |
$(REMOVE) $(TARGET).map |
$(REMOVE) $(TARGET).obj |
$(REMOVE) $(TARGET).a90 |
$(REMOVE) $(TARGET).sym |
$(REMOVE) $(TARGET).lnk |
$(REMOVE) $(TARGET).lss |
$(REMOVE) $(OBJ) |
$(REMOVE) $(LST) |
$(REMOVE) $(SRC:.c=.s) |
$(REMOVE) $(SRC:.c=.d) |
# Automatically generate C source code dependencies. |
# (Code originally taken from the GNU make user manual and modified |
# (See README.txt Credits).) |
# |
# Note that this will work with sh (bash) and sed that is shipped with WinAVR |
# (see the SHELL variable defined above). |
# This may not work with other shells or other seds. |
# |
%.d: %.c |
set -e; $(CC) -MM $(ALL_CFLAGS) $< \ |
| sed 's,\(.*\)\.o[ :]*,\1.o \1.d : ,g' > $@; \ |
[ -s $@ ] || rm -f $@ |
# Remove the '-' if you want to see the dependency files generated. |
-include $(SRC:.c=.d) |
# Listing of phony targets. |
.PHONY : all begin finish end sizebefore sizeafter gccversion coff extcoff \ |
clean clean_list program |
/branches/v0.60_MicroMag3_Nick666/Neigung mit Acc/math.c |
---|
0,0 → 1,118 |
/* |
Copyright 2007, Niklas Nold |
This program (files math.c and math.h) is free software; you can redistribute it and/or modify |
it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; |
either version 3 of the License, or (at your option) any later version. |
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; |
without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License |
along with this program. If not, see <http://www.gnu.org/licenses/>. |
Please note: All the other files for the project "Mikrokopter" by H. Buss are under the license (license_buss.txt) published by www.mikrokopter.de |
*/ |
#include "main.h" |
const uint8_t pgm_atan[270] PROGMEM = {0,1,2,3,5,6,7,8,9,10,11,12,13,15,16,17,18,19,20,21,22,23,24,25,26,27,27,28,29,30,31,32,33,33,34,35,36,37,37,38,39,39,40,41,41,42,43,43,44,44,45,46,46,47,47,48,48,49,49,50,50,51,51,52,52,52,53,53,54,54,54,55,55,56,56,56,57,57,57,58,58,58,59,59,59,60,60,60,60,61,61,61,61,62,62,62,62,63,63,63,63,64,64,64,64,65,65,65,65,65,66,66,66,66,66,67,67,67,67,67,67,68,68,68,68,68,68,69,69,69,69,69,69,69,70,70,70,70,70,70,70,70,71,71,71,71,71,71,71,71,72,72,72,72,72,72,72,72,72,73,73,73,73,73,73,73,73,73,73,74,74,74,74,74,74,74,74,74,74,74,74,75,75,75,75,75,75,75,75,75,75,75,75,75,76,76,76,76,76,76,76,76,76,76,76,76,76,76,76,77,77,77,77,77,77,77,77,77,77,77,77,77,77,77,77,77,78,78,78,78,78,78,78,78,78,78,78,78,78,78,78,78,78,78,78,78,79,79,79,79,79,79,79,79,79,79,79,79,79,79,79,79,79,79,79,79,79,79,79,79}; |
// Arkustangens2 im Gradmaß |
signed int atan2_i(signed int x, signed int y) |
{ |
int i,angle; |
int8_t m; |
if (!x && !y) return 0; //atan2 = 0 für x und y = 0 |
if (y < 0) m=-1; |
else m=1; |
if (x==0) return (90*m); // atan2 = 90° für x = 0 |
i = abs(((float)y / x) * 50); // Berechne i für die Lookup table (Schrittweite atan(x) ist 0.02 -> *50) |
if (i<270) angle = pgm_read_byte(&pgm_atan[i]); // Lookup für 1° bis 79° |
else if (i>5750) angle = 90; // Grenzwert ist 90° |
else if (i>=1910) angle = 89; // 89° bis 80° über Wertebereiche |
else if (i>=1150) angle = 88; |
else if (i>=820) angle = 87; |
else if (i>=640) angle = 86; |
else if (i>=520) angle = 85; |
else if (i>=440) angle = 84; |
else if (i>=380) angle = 83; |
else if (i>=335) angle = 82; |
else if (i>=299) angle = 81; |
else angle = 80; // (i>=270) |
if (x > 0) return (angle*m); // Quadrant I und IV |
else if ((x < 0) && (y >= 0)) return ((angle*-1) + 180); // Quadrant II |
else return (angle - 180); // x < 0 && y < 0 Quadrant III |
} |
const float pgm_sinus_f [91] PROGMEM = {0.000,0.017,0.035,0.052,0.070,0.087,0.105,0.122,0.139,0.156,0.174,0.191,0.208,0.225,0.242,0.259,0.276,0.292,0.309,0.326,0.342,0.358,0.375,0.391,0.407,0.423,0.438,0.454,0.469,0.485,0.500,0.515,0.530,0.545,0.559,0.574,0.588,0.602,0.616,0.629,0.643,0.656,0.669,0.682,0.695,0.707,0.719,0.731,0.743,0.755,0.766,0.777,0.788,0.799,0.809,0.819,0.829,0.839,0.848,0.857,0.866,0.875,0.883,0.891,0.899,0.906,0.914,0.921,0.927,0.934,0.940,0.946,0.951,0.956,0.961,0.966,0.970,0.974,0.978,0.982,0.985,0.988,0.990,0.993,0.995,0.996,0.998,0.999,0.999,1.000,1.000}; |
inline float pgm_read_float(const float *addr) |
{ |
union |
{ |
uint16_t i[2]; // 2 16-bit-Worte |
float f; |
} u; |
u.i[0]=pgm_read_word((PGM_P)addr); |
u.i[1]=pgm_read_word((PGM_P)addr+2); |
return u.f; |
} |
// Kosinusfunktion im Gradmaß |
float cos_f(signed int winkel) |
{ |
return (sin_f(90-winkel)); |
} |
// Sinusfunktion im Gradmaß |
float sin_f(signed int winkel) |
{ |
short int m,n; |
float sinus; |
//winkel = winkel % 360; |
if (winkel < 0) |
{ |
m = -1; |
winkel = abs(winkel); |
} |
else m = +1; |
// Quadranten auswerten |
if ((winkel > 90 ) && (winkel <= 180)) {winkel = 180 - winkel; n = 1;} |
else if ((winkel > 180 ) && (winkel <= 270)) {winkel = winkel - 180; n = -1;} |
else if ((winkel > 270) && (winkel <= 360)) {winkel = 360 - winkel; n = -1;} |
else n = 1; //0 - 90 Grad |
sinus = pgm_read_float(&pgm_sinus_f[winkel]); |
return (sinus*m*n); |
} |
const uint8_t pgm_asin[201] PROGMEM = {0,0,1,1,1,1,2,2,2,3,3,3,3,4,4,4,5,5,5,5,6,6,6,7,7,7,7,8,8,8,9,9,9,9,10,10,10,11,11,11,12,12,12,12,13,13,13,14,14,14,14,15,15,15,16,16,16,17,17,17,17,18,18,18,19,19,19,20,20,20,20,21,21,21,22,22,22,23,23,23,24,24,24,25,25,25,25,26,26,26,27,27,27,28,28,28,29,29,29,30,30,30,31,31,31,32,32,32,33,33,33,34,34,34,35,35,35,36,36,37,37,37,38,38,38,39,39,39,40,40,41,41,41,42,42,42,43,43,44,44,44,45,45,46,46,46,47,47,48,48,49,49,49,50,50,51,51,52,52,53,53,54,54,55,55,56,56,57,57,58,58,59,59,60,60,61,62,62,63,64,64,65,66,66,67,68,68,69,70,71,72,73,74,75,76,77,79,80,82,84,90}; |
// Akurssinusfunktion im Gradmaß |
int8_t asin_i(signed int i) |
{ |
signed char m; |
if (i < 0) {m=-1;i=abs(i);} |
else m=1; |
return (pgm_read_byte(&pgm_asin[i]) * m); |
} |
/branches/v0.60_MicroMag3_Nick666/Neigung mit Acc/math.h |
---|
0,0 → 1,11 |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Peter Muehlenbrock |
// Definitionen fuer Modul math |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
#include "main.h" |
extern signed int atan2_i(signed int x, signed int y); |
extern float cos_f(signed int winkel); |
extern float sin_f(signed int winkel); |
extern int8_t asin_i(signed int i); |
/branches/v0.60_MicroMag3_Nick666/Neigung mit Acc/menu.c |
---|
0,0 → 1,118 |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Copyright (c) 04.2007 Holger Buss |
// + only for non-profit use |
// + www.MikroKopter.com |
// + see the File "License.txt" for further Informations |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
#include "main.h" |
unsigned int TestInt = 0; |
#define ARRAYGROESSE 10 |
unsigned char Array[ARRAYGROESSE] = {1,2,3,4,5,6,7,8,9,10}; |
char DisplayBuff[80] = "Hallo Welt"; |
unsigned char DispPtr = 0; |
unsigned char RemoteTasten = 0; |
#define KEY1 0x01 |
#define KEY2 0x02 |
#define KEY3 0x04 |
#define KEY4 0x08 |
#define KEY5 0x10 |
void LcdClear(void) |
{ |
unsigned char i; |
for(i=0;i<80;i++) DisplayBuff[i] = ' '; |
} |
void Menu(void) |
{ |
static unsigned char MaxMenue = 10,MenuePunkt=0; |
if(RemoteTasten & KEY1) { if(MenuePunkt) MenuePunkt--; else MenuePunkt = MaxMenue; LcdClear(); } |
if(RemoteTasten & KEY2) { MenuePunkt++; LcdClear(); } |
if((RemoteTasten & KEY1) && (RemoteTasten & KEY2)) MenuePunkt = 0; |
LCD_printfxy(17,0,"[%i]",MenuePunkt); |
switch(MenuePunkt) |
{ |
case 0: |
LCD_printfxy(0,0,"++ MikroKopter ++"); |
LCD_printfxy(0,1,"V%d.%d",VERSION_HAUPTVERSION, VERSION_NEBENVERSION); |
LCD_printfxy(0,2,"Setting: %d ",GetActiveParamSetNumber()); |
LCD_printfxy(0,3,"(c) Holger Buss"); |
// if(RemoteTasten & KEY3) TestInt--; |
// if(RemoteTasten & KEY4) TestInt++; |
break; |
case 1: |
if(EE_Parameter.GlobalConfig & CFG_HOEHENREGELUNG) |
{ |
LCD_printfxy(0,0,"Hoehe: %5i",HoehenWert); |
LCD_printfxy(0,1,"SollHoehe: %5i",SollHoehe); |
LCD_printfxy(0,2,"Luftdruck: %5i",MessLuftdruck); |
LCD_printfxy(0,3,"Off : %5i",DruckOffsetSetting); |
} |
else |
{ |
LCD_printfxy(0,1,"Keine "); |
LCD_printfxy(0,2,"Höhenregelung"); |
} |
break; |
case 2: |
LCD_printfxy(0,0,"akt. Lage"); |
LCD_printfxy(0,1,"Nick: %5i",IntegralNick/1024); |
LCD_printfxy(0,2,"Roll: %5i",IntegralRoll/1024); |
LCD_printfxy(0,3,"Kompass: %5i",KompassValue); |
break; |
case 3: |
LCD_printfxy(0,0,"K1:%4i K2:%4i ",PPM_in[1],PPM_in[2]); |
LCD_printfxy(0,1,"K3:%4i K4:%4i ",PPM_in[3],PPM_in[4]); |
LCD_printfxy(0,2,"K5:%4i K6:%4i ",PPM_in[5],PPM_in[6]); |
LCD_printfxy(0,3,"K7:%4i Kanäle ",PPM_in[7]); |
break; |
case 4: |
LCD_printfxy(0,0,"Ni:%4i Ro:%4i ",PPM_in[EE_Parameter.Kanalbelegung[K_NICK]],PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]]); |
LCD_printfxy(0,1,"Gs:%4i Gi:%4i ",PPM_in[EE_Parameter.Kanalbelegung[K_GAS]],PPM_in[EE_Parameter.Kanalbelegung[K_GIER]]); |
LCD_printfxy(0,2,"P1:%4i P2:%4i ",PPM_in[EE_Parameter.Kanalbelegung[K_POTI1]],PPM_in[EE_Parameter.Kanalbelegung[K_POTI2]]); |
LCD_printfxy(0,3,"P3:%4i Kanäle ",PPM_in[EE_Parameter.Kanalbelegung[K_POTI3]]); |
break; |
case 5: |
LCD_printfxy(0,0,"Gyro - Sensor"); |
LCD_printfxy(0,1,"Nick %4i (%3i)",AccumulateNick / MessanzahlNick, AdNeutralNick); |
LCD_printfxy(0,2,"Roll %4i (%3i)",AccumulateRoll / MessanzahlRoll, AdNeutralRoll); |
LCD_printfxy(0,3,"Gier %4i (%3i)",AccumulateGier / MessanzahlGier, AdNeutralGier); |
break; |
case 6: |
LCD_printfxy(0,0,"ACC - Sensor"); |
LCD_printfxy(0,1,"Nick %4i (%3i)",accumulate_AccNick / messanzahl_AccNick,NeutralAccX); |
LCD_printfxy(0,2,"Roll %4i (%3i)",accumulate_AccRoll / messanzahl_AccRoll,NeutralAccY); |
LCD_printfxy(0,3,"Hoch %4i (%3i)",Aktuell_az/*accumulate_AccHoch / messanzahl_AccHoch*/,(int)NeutralAccZ); |
break; |
case 7: |
LCD_printfxy(0,1,"Spannung: %5i",UBat); |
LCD_printfxy(0,2,"Empf.Pegel:%5i",SenderOkay); |
break; |
case 8: |
LCD_printfxy(0,0,"Kompass "); |
LCD_printfxy(0,1,"Richtung: %5i",KompassRichtung); |
LCD_printfxy(0,2,"Messwert: %5i",KompassValue); |
LCD_printfxy(0,3,"Start: %5i",KompassStartwert); |
break; |
case 9: |
LCD_printfxy(0,0,"Poti1: %3i",Poti1); |
LCD_printfxy(0,1,"Poti2: %3i",Poti2); |
LCD_printfxy(0,2,"Poti3: %3i",Poti3); |
LCD_printfxy(0,3,"Poti4: %3i",Poti4); |
break; |
case 10: |
LCD_printfxy(0,0,"Servo " ); |
LCD_printfxy(0,1,"Setpoint %3i",Parameter_ServoNickControl); |
LCD_printfxy(0,2,"Stellung: %3i",ServoValue); |
LCD_printfxy(0,3,"Range:%3i-%3i",EE_Parameter.ServoNickMin,EE_Parameter.ServoNickMax); |
break; |
default: MaxMenue = MenuePunkt - 1; |
MenuePunkt = 0; |
break; |
} |
RemoteTasten = 0; |
} |
/branches/v0.60_MicroMag3_Nick666/Neigung mit Acc/menu.h |
---|
0,0 → 1,7 |
void LcdClear(void); |
extern void Menu(void); |
extern char DisplayBuff[80]; |
extern unsigned char DispPtr; |
unsigned char RemoteTasten; |
/branches/v0.60_MicroMag3_Nick666/Neigung mit Acc/old_macros.h |
---|
0,0 → 1,47 |
/* |
For backwards compatibility only. |
Ingo Busker ingo@mikrocontroller.com |
*/ |
#ifndef cbi |
#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit)) |
#endif |
#ifndef sbi |
#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit)) |
#endif |
#ifndef inb |
#define inb(sfr) _SFR_BYTE(sfr) |
#endif |
#ifndef outb |
#define outb(sfr, val) (_SFR_BYTE(sfr) = (val)) |
#endif |
#ifndef inw |
#define inw(sfr) _SFR_WORD(sfr) |
#endif |
#ifndef outw |
#define outw(sfr, val) (_SFR_WORD(sfr) = (val)) |
#endif |
#ifndef outp |
#define outp(val, sfr) outb(sfr, val) |
#endif |
#ifndef inp |
#define inp(sfr) inb(sfr) |
#endif |
#ifndef BV |
#define BV(bit) _BV(bit) |
#endif |
#ifndef PRG_RDB |
#define PRG_RDB pgm_read_byte |
#endif |
/branches/v0.60_MicroMag3_Nick666/Neigung mit Acc/printf_P.c |
---|
0,0 → 1,480 |
// Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist nicht von der Lizenz für den MikroKopter-Teil unterstellt |
/* |
Copyright (C) 1993 Free Software Foundation |
This file is part of the GNU IO Library. This library is free |
software; you can redistribute it and/or modify it under the |
terms of the GNU General Public License as published by the |
Free Software Foundation; either version 2, or (at your option) |
any later version. |
This library is distributed in the hope that it will be useful, |
but WITHOUT ANY WARRANTY; without even the implied warranty of |
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
GNU General Public License for more details. |
You should have received a copy of the GNU General Public License |
along with this library; see the file COPYING. If not, write to the Free |
Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
As a special exception, if you link this library with files |
compiled with a GNU compiler to produce an executable, this does not cause |
the resulting executable to be covered by the GNU General Public License. |
This exception does not however invalidate any other reasons why |
the executable file might be covered by the GNU General Public License. */ |
/* |
* Copyright (c) 1990 Regents of the University of California. |
* All rights reserved. |
* |
* Redistribution and use in source and binary forms, with or without |
* modification, are permitted provided that the following conditions |
* are met: |
* 1. Redistributions of source code must retain the above copyright |
* notice, this list of conditions and the following disclaimer. |
* 2. Redistributions in binary form must reproduce the above copyright |
* notice, this list of conditions and the following disclaimer in the |
* documentation and/or other materials provided with the distribution. |
* 3. [rescinded 22 July 1999] |
* 4. Neither the name of the University nor the names of its contributors |
* may be used to endorse or promote products derived from this software |
* without specific prior written permission. |
* |
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND |
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE |
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
* SUCH DAMAGE. |
*/ |
/****************************************************************************** |
This file is a patched version of printf called _printf_P |
It is made to work with avr-gcc for Atmel AVR MCUs. |
There are some differences from standard printf: |
1. There is no floating point support (with fp the code is about 8K!) |
2. Return type is void |
3. Format string must be in program memory (by using macro printf this is |
done automaticaly) |
4. %n is not implemented (just remove the comment around it if you need it) |
5. If LIGHTPRINTF is defined, the code is about 550 bytes smaller and the |
folowing specifiers are disabled : |
space # * . - + p s o O |
6. A function void uart_sendchar(char c) is used for output. The UART must |
be initialized before using printf. |
Alexander Popov |
sasho@vip.orbitel.bg |
******************************************************************************/ |
/* |
* Actual printf innards. |
* |
* This code is large and complicated... |
*/ |
#include <string.h> |
#ifdef __STDC__ |
#include <stdarg.h> |
#else |
#include <varargs.h> |
#endif |
#include "main.h" |
//#define LIGHTPRINTF |
char PrintZiel; |
char Putchar(char zeichen) |
{ |
if(PrintZiel == OUT_LCD) { DisplayBuff[DispPtr++] = zeichen; return(1);} |
else return(uart_putchar(zeichen)); |
} |
void PRINT(const char * ptr, unsigned int len) |
{ |
for(;len;len--) Putchar(*ptr++); |
} |
void PRINTP(const char * ptr, unsigned int len) |
{ |
for(;len;len--) Putchar(pgm_read_byte(ptr++)); |
} |
void PAD_SP(signed char howmany) |
{ |
for(;howmany>0;howmany--) Putchar(' '); |
} |
void PAD_0(signed char howmany) |
{ |
for(;howmany>0;howmany--) Putchar('0'); |
} |
#define BUF 40 |
/* |
* Macros for converting digits to letters and vice versa |
*/ |
#define to_digit(c) ((c) - '0') |
#define is_digit(c) ((c)<='9' && (c)>='0') |
#define to_char(n) ((n) + '0') |
/* |
* Flags used during conversion. |
*/ |
#define LONGINT 0x01 /* long integer */ |
#define LONGDBL 0x02 /* long double; unimplemented */ |
#define SHORTINT 0x04 /* short integer */ |
#define ALT 0x08 /* alternate form */ |
#define LADJUST 0x10 /* left adjustment */ |
#define ZEROPAD 0x20 /* zero (as opposed to blank) pad */ |
#define HEXPREFIX 0x40 /* add 0x or 0X prefix */ |
void _printf_P (char ziel,char const *fmt0, ...) /* Works with string from FLASH */ |
{ |
va_list ap; |
register const char *fmt; /* format string */ |
register char ch; /* character from fmt */ |
register int n; /* handy integer (short term usage) */ |
register char *cp; /* handy char pointer (short term usage) */ |
const char *fmark; /* for remembering a place in fmt */ |
register unsigned char flags; /* flags as above */ |
signed char width; /* width from format (%8d), or 0 */ |
signed char prec; /* precision from format (%.3d), or -1 */ |
char sign; /* sign prefix (' ', '+', '-', or \0) */ |
unsigned long _ulong=0; /* integer arguments %[diouxX] */ |
#define OCT 8 |
#define DEC 10 |
#define HEX 16 |
unsigned char base; /* base for [diouxX] conversion */ |
signed char dprec; /* a copy of prec if [diouxX], 0 otherwise */ |
signed char dpad; /* extra 0 padding needed for integers */ |
signed char fieldsz; /* field size expanded by sign, dpad etc */ |
/* The initialization of 'size' is to suppress a warning that |
'size' might be used unitialized. It seems gcc can't |
quite grok this spaghetti code ... */ |
signed char size = 0; /* size of converted field or string */ |
char buf[BUF]; /* space for %c, %[diouxX], %[eEfgG] */ |
char ox[2]; /* space for 0x hex-prefix */ |
PrintZiel = ziel; // bestimmt, LCD oder UART |
va_start(ap, fmt0); |
fmt = fmt0; |
/* |
* Scan the format for conversions (`%' character). |
*/ |
for (;;) { |
for (fmark = fmt; (ch = pgm_read_byte(fmt)) != '\0' && ch != '%'; fmt++) |
/* void */; |
if ((n = fmt - fmark) != 0) { |
PRINTP(fmark, n); |
} |
if (ch == '\0') |
goto done; |
fmt++; /* skip over '%' */ |
flags = 0; |
dprec = 0; |
width = 0; |
prec = -1; |
sign = '\0'; |
rflag: ch = PRG_RDB(fmt++); |
reswitch: |
#ifdef LIGHTPRINTF |
if (ch=='o' || ch=='u' || (ch|0x20)=='x') { |
#else |
if (ch=='u' || (ch|0x20)=='x') { |
#endif |
if (flags&LONGINT) { |
_ulong=va_arg(ap, unsigned long); |
} else { |
register unsigned int _d; |
_d=va_arg(ap, unsigned int); |
_ulong = flags&SHORTINT ? (unsigned long)(unsigned short)_d : (unsigned long)_d; |
} |
} |
#ifndef LIGHTPRINTF |
if(ch==' ') { |
/* |
* ``If the space and + flags both appear, the space |
* flag will be ignored.'' |
* -- ANSI X3J11 |
*/ |
if (!sign) |
sign = ' '; |
goto rflag; |
} else if (ch=='#') { |
flags |= ALT; |
goto rflag; |
} else if (ch=='*'||ch=='-') { |
if (ch=='*') { |
/* |
* ``A negative field width argument is taken as a |
* - flag followed by a positive field width.'' |
* -- ANSI X3J11 |
* They don't exclude field widths read from args. |
*/ |
if ((width = va_arg(ap, int)) >= 0) |
goto rflag; |
width = -width; |
} |
flags |= LADJUST; |
flags &= ~ZEROPAD; /* '-' disables '0' */ |
goto rflag; |
} else if (ch=='+') { |
sign = '+'; |
goto rflag; |
} else if (ch=='.') { |
if ((ch = PRG_RDB(fmt++)) == '*') { |
n = va_arg(ap, int); |
prec = n < 0 ? -1 : n; |
goto rflag; |
} |
n = 0; |
while (is_digit(ch)) { |
n = n*10 + to_digit(ch); |
ch = PRG_RDB(fmt++); |
} |
prec = n < 0 ? -1 : n; |
goto reswitch; |
} else |
#endif /* LIGHTPRINTF */ |
if (ch=='0') { |
/* |
* ``Note that 0 is taken as a flag, not as the |
* beginning of a field width.'' |
* -- ANSI X3J11 |
*/ |
if (!(flags & LADJUST)) |
flags |= ZEROPAD; /* '-' disables '0' */ |
goto rflag; |
} else if (ch>='1' && ch<='9') { |
n = 0; |
do { |
n = 10 * n + to_digit(ch); |
ch = PRG_RDB(fmt++); |
} while (is_digit(ch)); |
width = n; |
goto reswitch; |
} else if (ch=='h') { |
flags |= SHORTINT; |
goto rflag; |
} else if (ch=='l') { |
flags |= LONGINT; |
goto rflag; |
} else if (ch=='c') { |
*(cp = buf) = va_arg(ap, int); |
size = 1; |
sign = '\0'; |
} else if (ch=='D'||ch=='d'||ch=='i') { |
if(ch=='D') |
flags |= LONGINT; |
if (flags&LONGINT) { |
_ulong=va_arg(ap, long); |
} else { |
register int _d; |
_d=va_arg(ap, int); |
_ulong = flags&SHORTINT ? (long)(short)_d : (long)_d; |
} |
if ((long)_ulong < 0) { |
_ulong = -_ulong; |
sign = '-'; |
} |
base = DEC; |
goto number; |
} else |
/* |
if (ch=='n') { |
if (flags & LONGINT) |
*va_arg(ap, long *) = ret; |
else if (flags & SHORTINT) |
*va_arg(ap, short *) = ret; |
else |
*va_arg(ap, int *) = ret; |
continue; // no output |
} else |
*/ |
#ifndef LIGHTPRINTF |
if (ch=='O'||ch=='o') { |
if (ch=='O') |
flags |= LONGINT; |
base = OCT; |
goto nosign; |
} else if (ch=='p') { |
/* |
* ``The argument shall be a pointer to void. The |
* value of the pointer is converted to a sequence |
* of printable characters, in an implementation- |
* defined manner.'' |
* -- ANSI X3J11 |
*/ |
/* NOSTRICT */ |
_ulong = (unsigned int)va_arg(ap, void *); |
base = HEX; |
flags |= HEXPREFIX; |
ch = 'x'; |
goto nosign; |
} else if (ch=='s') { // print a string from RAM |
if ((cp = va_arg(ap, char *)) == NULL) { |
cp=buf; |
cp[0] = '('; |
cp[1] = 'n'; |
cp[2] = 'u'; |
cp[4] = cp[3] = 'l'; |
cp[5] = ')'; |
cp[6] = '\0'; |
} |
if (prec >= 0) { |
/* |
* can't use strlen; can only look for the |
* NUL in the first `prec' characters, and |
* strlen() will go further. |
*/ |
char *p = (char*)memchr(cp, 0, prec); |
if (p != NULL) { |
size = p - cp; |
if (size > prec) |
size = prec; |
} else |
size = prec; |
} else |
size = strlen(cp); |
sign = '\0'; |
} else |
#endif /* LIGHTPRINTF */ |
if(ch=='U'||ch=='u') { |
if (ch=='U') |
flags |= LONGINT; |
base = DEC; |
goto nosign; |
} else if (ch=='X'||ch=='x') { |
base = HEX; |
/* leading 0x/X only if non-zero */ |
if (flags & ALT && _ulong != 0) |
flags |= HEXPREFIX; |
/* unsigned conversions */ |
nosign: sign = '\0'; |
/* |
* ``... diouXx conversions ... if a precision is |
* specified, the 0 flag will be ignored.'' |
* -- ANSI X3J11 |
*/ |
number: if ((dprec = prec) >= 0) |
flags &= ~ZEROPAD; |
/* |
* ``The result of converting a zero value with an |
* explicit precision of zero is no characters.'' |
* -- ANSI X3J11 |
*/ |
cp = buf + BUF; |
if (_ulong != 0 || prec != 0) { |
register unsigned char _d,notlastdigit; |
do { |
notlastdigit=(_ulong>=base); |
_d = _ulong % base; |
if (_d<10) { |
_d+='0'; |
} else { |
_d+='a'-10; |
if (ch=='X') _d&=~0x20; |
} |
*--cp=_d; |
_ulong /= base; |
} while (notlastdigit); |
#ifndef LIGHTPRINTF |
// handle octal leading 0 |
if (base==OCT && flags & ALT && *cp != '0') |
*--cp = '0'; |
#endif |
} |
size = buf + BUF - cp; |
} else { //default |
/* "%?" prints ?, unless ? is NUL */ |
if (ch == '\0') |
goto done; |
/* pretend it was %c with argument ch */ |
cp = buf; |
*cp = ch; |
size = 1; |
sign = '\0'; |
} |
/* |
* All reasonable formats wind up here. At this point, |
* `cp' points to a string which (if not flags&LADJUST) |
* should be padded out to `width' places. If |
* flags&ZEROPAD, it should first be prefixed by any |
* sign or other prefix; otherwise, it should be blank |
* padded before the prefix is emitted. After any |
* left-hand padding and prefixing, emit zeroes |
* required by a decimal [diouxX] precision, then print |
* the string proper, then emit zeroes required by any |
* leftover floating precision; finally, if LADJUST, |
* pad with blanks. |
*/ |
/* |
* compute actual size, so we know how much to pad. |
*/ |
fieldsz = size; |
dpad = dprec - size; |
if (dpad < 0) |
dpad = 0; |
if (sign) |
fieldsz++; |
else if (flags & HEXPREFIX) |
fieldsz += 2; |
fieldsz += dpad; |
/* right-adjusting blank padding */ |
if ((flags & (LADJUST|ZEROPAD)) == 0) |
PAD_SP(width - fieldsz); |
/* prefix */ |
if (sign) { |
PRINT(&sign, 1); |
} else if (flags & HEXPREFIX) { |
ox[0] = '0'; |
ox[1] = ch; |
PRINT(ox, 2); |
} |
/* right-adjusting zero padding */ |
if ((flags & (LADJUST|ZEROPAD)) == ZEROPAD) |
PAD_0(width - fieldsz); |
/* leading zeroes from decimal precision */ |
PAD_0(dpad); |
/* the string or number proper */ |
PRINT(cp, size); |
/* left-adjusting padding (always blank) */ |
if (flags & LADJUST) |
PAD_SP(width - fieldsz); |
} |
done: |
va_end(ap); |
} |
/branches/v0.60_MicroMag3_Nick666/Neigung mit Acc/printf_P.h |
---|
0,0 → 1,19 |
#ifndef _PRINTF_P_H_ |
#define _PRINTF_P_H_ |
#include <avr/pgmspace.h> |
#define OUT_V24 0 |
#define OUT_LCD 1 |
extern void _printf_P (char, char const *fmt0, ...); |
extern char PrintZiel; |
#define printf_P(format, args...) _printf_P(OUT_V24,format , ## args) |
#define printf(format, args...) _printf_P(OUT_V24,PSTR(format) , ## args) |
#define LCD_printfxy(x,y,format, args...) { DispPtr = y * 20 + x; _printf_P(OUT_LCD,PSTR(format) , ## args);} |
#define LCD_printf(format, args...) { _printf_P(OUT_LCD,PSTR(format) , ## args);} |
#endif |
/branches/v0.60_MicroMag3_Nick666/Neigung mit Acc/rc.c |
---|
0,0 → 1,85 |
/*####################################################################################### |
Decodieren eines RC Summen Signals |
#######################################################################################*/ |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Copyright (c) 04.2007 Holger Buss |
// + only for non-profit use |
// + www.MikroKopter.com |
// + see the File "License.txt" for further Informations |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
#include "rc.h" |
#include "main.h" |
volatile int PPM_in[11]; |
volatile int PPM_diff[11]; // das diffenzierte Stick-Signal |
volatile unsigned char NewPpmData = 1; |
//############################################################################ |
//zum decodieren des PPM-Signals wird Timer1 mit seiner Input |
//Capture Funktion benutzt: |
void rc_sum_init (void) |
//############################################################################ |
{ |
TCCR1B=(1<<CS11)|(1<<CS10)|(1<<ICES1)|(1<<ICNC1);//|(1 << WGM12); //timer1 prescale 64 |
// PWM |
//TCCR1A = (1 << COM1B1) | (1 << WGM11) | (1 << WGM10); |
//TCCR1B |= (1 << WGM12); |
//OCR1B = 55; |
TIMSK1 |= _BV(ICIE1); |
AdNeutralGier = 0; |
AdNeutralRoll = 0; |
AdNeutralNick = 0; |
return; |
} |
//############################################################################ |
//Diese Routine startet und inizialisiert den Timer für RC |
SIGNAL(SIG_INPUT_CAPTURE1) |
//############################################################################ |
{ |
static unsigned int AltICR=0; |
signed int signal = 0; |
static int index; |
signal = (unsigned int) ICR1 - AltICR; |
AltICR = ICR1; |
//Syncronisationspause? |
if ((signal > 1500) && (signal < 8000)) |
{ |
index = 1; |
NewPpmData = 0; // Null bedeutet: Neue Daten |
// OCR2A = Poti2/2 + 80; |
} |
else |
{ |
if(index < 10) |
{ |
if((signal > 250) && (signal < 687)) |
{ |
signal -= 466; |
// Stabiles Signal |
if(abs(signal - PPM_in[index]) < 6) { if(SenderOkay < 200) SenderOkay += 10;} |
signal = (3 * (PPM_in[index]) + signal) / 4; |
//373 entspricht ca. 1.5ms also Mittelstellung |
PPM_diff[index] = signal - PPM_in[index]; |
PPM_in[index] = signal; |
} |
index++; |
/* if(index == 5) PORTD |= 0x20; else PORTD &= ~0x20; // Servosignal an J3 anlegen |
if(index == 6) PORTD |= 0x10; else PORTD &= ~0x10; // Servosignal an J4 anlegen |
if(index == 7) PORTD |= 0x08; else PORTD &= ~0x08; // Servosignal an J5 anlegen */ |
} |
} |
} |
/branches/v0.60_MicroMag3_Nick666/Neigung mit Acc/rc.h |
---|
0,0 → 1,29 |
/*####################################################################################### |
Derkodieren eines RC Summen Signals |
#######################################################################################*/ |
#ifndef _RC_H |
#define _RC_H |
#if defined (__AVR_ATmega32__) |
#define TIMER_TEILER CK64 |
#define TIMER_RELOAD_VALUE 250 |
#endif |
#if defined (__AVR_ATmega644__) |
//#define TIMER_TEILER CK64 |
#define TIMER_RELOAD_VALUE 250 |
//#define TIMER_TEILER CK256 // bei 20MHz |
//#define TIMER_RELOAD_VALUE -78 // bei 20MHz |
#endif |
#define GAS PPM_in[2] |
extern void rc_sum_init (void); |
extern volatile int PPM_in[11]; |
extern volatile int PPM_diff[11]; // das diffenzierte Stick-Signal |
extern volatile unsigned char NewPpmData; |
#endif //_RC_H |
/branches/v0.60_MicroMag3_Nick666/Neigung mit Acc/timer0.c |
---|
0,0 → 1,134 |
#include "main.h" |
volatile unsigned int CountMilliseconds = 0; |
volatile static unsigned int tim_main; |
volatile unsigned char UpdateMotor = 0; |
volatile unsigned int beeptime = 0; |
volatile unsigned int cntKompass = 0; |
int ServoValue = 0; |
enum { |
STOP = 0, |
CK = 1, |
CK8 = 2, |
CK64 = 3, |
CK256 = 4, |
CK1024 = 5, |
T0_FALLING_EDGE = 6, |
T0_RISING_EDGE = 7 |
}; |
SIGNAL (SIG_OVERFLOW0) // 8kHz |
{ |
static unsigned char cnt_1ms = 1,cnt = 0; |
// TCNT0 -= 250;//TIMER_RELOAD_VALUE; |
if(!cnt--) |
{ |
cnt = 9; |
cnt_1ms++; |
cnt_1ms %= 2; |
if(!cnt_1ms) UpdateMotor = 1; |
CountMilliseconds++; |
if(Timeout) Timeout--; |
} |
if(beeptime > 1) |
{ |
beeptime--; |
PORTD |= (1<<PD2); |
} |
else |
PORTD &= ~(1<<PD2); |
if(EE_Parameter.GlobalConfig & CFG_KOMPASS_AKTIV) |
{ |
MM3_timer0(); // Kompass auslesen |
if (!cntKompass--) // Aufruf mit 25 Hz |
{ |
KompassValue = MM3_heading(); |
KompassRichtung = ((540 + KompassValue - KompassStartwert) % 360) - 180; |
cntKompass = 320; |
} |
} |
} |
void Timer_Init(void) |
{ |
tim_main = SetDelay(10); |
TCCR0B = CK8; |
TCCR0A = (1<<COM0A1)|(1<<COM0B1)|3;//fast PWM |
OCR0A = 0; |
OCR0B = 120; |
TCNT0 = -TIMER_RELOAD_VALUE; // reload |
//OCR1 = 0x00; |
TCCR2A=(1<<COM2A1)|(1<<COM2A0)|3; |
TCCR2B=(0<<CS20)|(1<<CS21)|(1<<CS22); |
// TIMSK2 |= _BV(TOIE2); |
TIMSK2 |= _BV(OCIE2A); |
TIMSK0 |= _BV(TOIE0); |
OCR2A = 10; |
TCNT2 = 0; |
} |
// ----------------------------------------------------------------------- |
unsigned int SetDelay (unsigned int t) |
{ |
// TIMSK0 &= ~_BV(TOIE0); |
return(CountMilliseconds + t + 1); |
// TIMSK0 |= _BV(TOIE0); |
} |
// ----------------------------------------------------------------------- |
char CheckDelay(unsigned int t) |
{ |
// TIMSK0 &= ~_BV(TOIE0); |
return(((t - CountMilliseconds) & 0x8000) >> 9); |
// TIMSK0 |= _BV(TOIE0); |
} |
// ----------------------------------------------------------------------- |
void Delay_ms(unsigned int w) |
{ |
unsigned int akt; |
akt = SetDelay(w); |
while (!CheckDelay(akt)); |
} |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Servo ansteuern |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
SIGNAL(SIG_OUTPUT_COMPARE2A) |
{ |
static unsigned char timer = 10; |
if(!timer--) |
{ |
TCCR2A=(1<<COM2A1)|(0<<COM2A0)|3; |
ServoValue = Parameter_ServoNickControl; |
if(EE_Parameter.ServoNickCompInvert & 0x01) ServoValue += ((long) EE_Parameter.ServoNickComp * (IntegralNick / 128)) / 512; |
else ServoValue -= ((long) EE_Parameter.ServoNickComp * (IntegralNick / 128)) / 512; |
if(ServoValue < EE_Parameter.ServoNickMin) ServoValue = EE_Parameter.ServoNickMin; |
else if(ServoValue > EE_Parameter.ServoNickMax) ServoValue = EE_Parameter.ServoNickMax; |
//DebugOut.Analog[10] = ServoValue; |
OCR2A = ServoValue;// + 75; |
timer = EE_Parameter.ServoNickRefresh; |
} |
else |
{ |
TCCR2A =3; |
PORTD&=~0x80; |
} |
} |
/branches/v0.60_MicroMag3_Nick666/Neigung mit Acc/timer0.h |
---|
0,0 → 1,14 |
#define TIMER_TEILER CK8 |
#define TIMER_RELOAD_VALUE 250 |
void Timer_Init(void); |
void Delay_ms(unsigned int); |
unsigned int SetDelay (unsigned int t); |
char CheckDelay (unsigned int t); |
extern volatile unsigned int CountMilliseconds; |
extern volatile unsigned char UpdateMotor; |
extern volatile unsigned int beeptime; |
extern volatile unsigned int cntKompass; |
extern int ServoValue; |
/branches/v0.60_MicroMag3_Nick666/Neigung mit Acc/twimaster.c |
---|
0,0 → 1,131 |
/*############################################################################ |
############################################################################*/ |
#include "main.h" |
unsigned char twi_state = 0; |
unsigned char motor = 0; |
unsigned char motorread = 0; |
unsigned char motor_rx[8]; |
//############################################################################ |
//Initzialisieren der I2C (TWI) Schnittstelle |
void i2c_init(void) |
//############################################################################ |
{ |
TWSR = 0; |
TWBR = ((SYSCLK/SCL_CLOCK)-16)/2; |
} |
//############################################################################ |
//Start I2C |
char i2c_start(void) |
//############################################################################ |
{ |
TWCR = (1<<TWSTA) | (1<<TWEN) | (1<<TWINT) | (1<<TWIE); |
return(0); |
} |
//############################################################################ |
//Start I2C |
void i2c_stop(void) |
//############################################################################ |
{ |
TWCR = (1<<TWEN) | (1<<TWSTO) | (1<<TWINT); |
} |
//############################################################################ |
//Start I2C |
char i2c_write_byte(char byte) |
//############################################################################ |
{ |
TWSR = 0x00; |
TWDR = byte; |
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWIE); |
return(0); |
} |
//############################################################################ |
//Start I2C |
SIGNAL (TWI_vect) |
//############################################################################ |
{ |
switch (twi_state++) |
{ |
case 0: |
i2c_write_byte(0x52+(motor*2)); |
break; |
case 1: |
switch(motor++) |
{ |
case 0: |
i2c_write_byte(Motor_Vorne); |
break; |
case 1: |
i2c_write_byte(Motor_Hinten); |
break; |
case 2: |
i2c_write_byte(Motor_Rechts); |
break; |
case 3: |
i2c_write_byte(Motor_Links); |
break; |
} |
break; |
case 2: |
i2c_stop(); |
if (motor<4) twi_state = 0; |
else motor = 0; |
i2c_start(); |
break; |
//Liest Daten von Motor |
case 3: |
i2c_write_byte(0x53+(motorread*2)); |
break; |
case 4: |
switch(motorread) |
{ |
case 0: |
i2c_write_byte(Motor_Vorne); |
break; |
case 1: |
i2c_write_byte(Motor_Hinten); |
break; |
case 2: |
i2c_write_byte(Motor_Rechts); |
break; |
case 3: |
i2c_write_byte(Motor_Links); |
break; |
} |
break; |
case 5: //1 Byte vom Motor lesen |
motor_rx[motorread] = TWDR; |
case 6: |
switch(motorread) |
{ |
case 0: |
i2c_write_byte(Motor_Vorne); |
break; |
case 1: |
i2c_write_byte(Motor_Hinten); |
break; |
case 2: |
i2c_write_byte(Motor_Rechts); |
break; |
case 3: |
i2c_write_byte(Motor_Links); |
break; |
} |
break; |
case 7: //2 Byte vom Motor lesen |
motor_rx[motorread+4] = TWDR; |
motorread++; |
if (motorread>3) motorread=0; |
i2c_stop(); |
twi_state = 0; |
} |
} |
/branches/v0.60_MicroMag3_Nick666/Neigung mit Acc/twimaster.h |
---|
0,0 → 1,32 |
/*############################################################################ |
############################################################################*/ |
#ifndef _I2C_MASTER_H |
#define _I2C_MASTER_H |
//############################################################################ |
// I2C Konstanten |
#define SCL_CLOCK 200000L |
#define I2C_TIMEOUT 30000 |
#define I2C_START 0x08 |
#define I2C_REPEATED_START 0x10 |
#define I2C_TX_SLA_ACK 0x18 |
#define I2C_TX_DATA_ACK 0x28 |
#define I2C_RX_SLA_ACK 0x40 |
#define I2C_RX_DATA_ACK 0x50 |
//############################################################################ |
extern unsigned char twi_state; |
extern unsigned char motor; |
extern unsigned char motorread; |
extern unsigned char motor_rx[8]; |
void i2c_init (void); // I2C initialisieren |
char i2c_start (void); // Start I2C |
void i2c_stop (void); // Stop I2C |
char i2c_write_byte (char byte); // 1 Byte schreiben |
#endif |
/branches/v0.60_MicroMag3_Nick666/Neigung mit Acc/uart.c |
---|
0,0 → 1,328 |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Copyright (c) 04.2007 Holger Buss |
// + only for non-profit use |
// + www.MikroKopter.com |
// + see the File "License.txt" for further Informations |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
#include "main.h" |
#include "uart.h" |
unsigned char DebugGetAnforderung = 0,DebugDisplayAnforderung = 0,DebugDataAnforderung = 0,GetVersionAnforderung = 0; |
unsigned volatile char SioTmp = 0; |
unsigned volatile char SendeBuffer[MAX_SENDE_BUFF]; |
unsigned volatile char RxdBuffer[MAX_EMPFANGS_BUFF]; |
unsigned volatile char NMEABuffer[MAX_EMPFANGS_BUFF]; |
unsigned volatile char NeuerDatensatzEmpfangen = 0; |
unsigned volatile char NeueKoordinateEmpfangen = 0; |
unsigned volatile char UebertragungAbgeschlossen = 1; |
unsigned volatile char CntCrcError = 0; |
unsigned volatile char AnzahlEmpfangsBytes = 0; |
unsigned volatile char PC_DebugTimeout = 0; |
unsigned char PcZugriff = 100; |
unsigned char MotorTest[4] = {0,0,0,0}; |
unsigned char MeineSlaveAdresse; |
struct str_DebugOut DebugOut; |
struct str_Debug DebugIn; |
struct str_VersionInfo VersionInfo; |
int Debug_Timer; |
//+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
//++ Sende-Part der Datenübertragung |
//+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
SIGNAL(INT_VEC_TX) |
{ |
static unsigned int ptr = 0; |
unsigned char tmp_tx; |
if(!UebertragungAbgeschlossen) |
{ |
ptr++; // die [0] wurde schon gesendet |
tmp_tx = SendeBuffer[ptr]; |
if((tmp_tx == '\r') || (ptr == MAX_SENDE_BUFF)) |
{ |
ptr = 0; |
UebertragungAbgeschlossen = 1; |
} |
UDR = tmp_tx; |
} |
else ptr = 0; |
} |
//+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
//++ Empfangs-Part der Datenübertragung, incl. CRC-Auswertung |
//+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
SIGNAL(INT_VEC_RX) |
{ |
static unsigned int crc; |
static unsigned char crc1,crc2,buf_ptr; |
static unsigned char UartState = 0; |
unsigned char CrcOkay = 0; |
SioTmp = UDR; |
if(buf_ptr >= MAX_EMPFANGS_BUFF) UartState = 0; |
if(SioTmp == '\r' && UartState == 2) |
{ |
UartState = 0; |
crc -= RxdBuffer[buf_ptr-2]; |
crc -= RxdBuffer[buf_ptr-1]; |
crc %= 4096; |
crc1 = '=' + crc / 64; |
crc2 = '=' + crc % 64; |
CrcOkay = 0; |
if((crc1 == RxdBuffer[buf_ptr-2]) && (crc2 == RxdBuffer[buf_ptr-1])) CrcOkay = 1; else { CrcOkay = 0; CntCrcError++;}; |
if(!NeuerDatensatzEmpfangen && CrcOkay) // Datensatz schon verarbeitet |
{ |
NeuerDatensatzEmpfangen = 1; |
AnzahlEmpfangsBytes = buf_ptr; |
RxdBuffer[buf_ptr] = '\r'; |
if(/*(RxdBuffer[1] == MeineSlaveAdresse || (RxdBuffer[1] == 'a')) && */(RxdBuffer[2] == 'R')) wdt_enable(WDTO_250MS); // Reset-Commando |
} |
} |
else |
switch(UartState) |
{ |
case 0: |
if(SioTmp == '#' && !NeuerDatensatzEmpfangen) UartState = 1; // Startzeichen und Daten schon verarbeitet |
buf_ptr = 0; |
RxdBuffer[buf_ptr++] = SioTmp; |
crc = SioTmp; |
break; |
case 1: // Adresse auswerten |
UartState++; |
RxdBuffer[buf_ptr++] = SioTmp; |
crc += SioTmp; |
break; |
case 2: // Eingangsdaten sammeln |
RxdBuffer[buf_ptr] = SioTmp; |
if(buf_ptr < MAX_EMPFANGS_BUFF) buf_ptr++; |
else UartState = 0; |
crc += SioTmp; |
break; |
default: |
UartState = 0; |
break; |
} |
} |
// -------------------------------------------------------------------------- |
void AddCRC(unsigned int wieviele) |
{ |
unsigned int tmpCRC = 0,i; |
for(i = 0; i < wieviele;i++) |
{ |
tmpCRC += SendeBuffer[i]; |
} |
tmpCRC %= 4096; |
SendeBuffer[i++] = '=' + tmpCRC / 64; |
SendeBuffer[i++] = '=' + tmpCRC % 64; |
SendeBuffer[i++] = '\r'; |
UebertragungAbgeschlossen = 0; |
UDR = SendeBuffer[0]; |
} |
// -------------------------------------------------------------------------- |
void SendOutData(unsigned char cmd,unsigned char modul, unsigned char *snd, unsigned char len) |
{ |
unsigned int pt = 0; |
unsigned char a,b,c; |
unsigned char ptr = 0; |
SendeBuffer[pt++] = '#'; // Startzeichen |
SendeBuffer[pt++] = modul; // Adresse (a=0; b=1,...) |
SendeBuffer[pt++] = cmd; // Commando |
while(len) |
{ |
if(len) { a = snd[ptr++]; len--;} else a = 0; |
if(len) { b = snd[ptr++]; len--;} else b = 0; |
if(len) { c = snd[ptr++]; len--;} else c = 0; |
SendeBuffer[pt++] = '=' + (a >> 2); |
SendeBuffer[pt++] = '=' + (((a & 0x03) << 4) | ((b & 0xf0) >> 4)); |
SendeBuffer[pt++] = '=' + (((b & 0x0f) << 2) | ((c & 0xc0) >> 6)); |
SendeBuffer[pt++] = '=' + ( c & 0x3f); |
} |
AddCRC(pt); |
} |
// -------------------------------------------------------------------------- |
void Decode64(unsigned char *ptrOut, unsigned char len, unsigned char ptrIn,unsigned char max) // Wohin mit den Daten; Wie lang; Wo im RxdBuffer |
{ |
unsigned char a,b,c,d; |
unsigned char ptr = 0; |
unsigned char x,y,z; |
while(len) |
{ |
a = RxdBuffer[ptrIn++] - '='; |
b = RxdBuffer[ptrIn++] - '='; |
c = RxdBuffer[ptrIn++] - '='; |
d = RxdBuffer[ptrIn++] - '='; |
if(ptrIn > max - 2) break; // nicht mehr Daten verarbeiten, als empfangen wurden |
x = (a << 2) | (b >> 4); |
y = ((b & 0x0f) << 4) | (c >> 2); |
z = ((c & 0x03) << 6) | d; |
if(len--) ptrOut[ptr++] = x; else break; |
if(len--) ptrOut[ptr++] = y; else break; |
if(len--) ptrOut[ptr++] = z; else break; |
} |
} |
// -------------------------------------------------------------------------- |
void BearbeiteRxDaten(void) |
{ |
if(!NeuerDatensatzEmpfangen) return; |
//unsigned int tmp_int_arr1[1]; |
//unsigned int tmp_int_arr2[2]; |
//unsigned int tmp_int_arr3[3]; |
unsigned char tmp_char_arr2[2]; |
//unsigned char tmp_char_arr3[3]; |
//unsigned char tmp_char_arr4[4]; |
//if(!MotorenEin) |
PcZugriff = 255; |
switch(RxdBuffer[2]) |
{ |
case 'c':// Debugdaten incl. Externe IOs usw |
Decode64((unsigned char *) &DebugIn,sizeof(DebugIn),3,AnzahlEmpfangsBytes); |
/* for(unsigned char i=0; i<4;i++) |
{ |
EE_CheckAndWrite(&EE_Buffer[EE_DEBUGWERTE + i*2], DebugIn.Analog[i]); |
EE_CheckAndWrite(&EE_Buffer[EE_DEBUGWERTE + i*2 + 1], DebugIn.Analog[i] >> 8); |
}*/ |
RemoteTasten |= DebugIn.RemoteTasten; |
DebugDataAnforderung = 1; |
break; |
case 'h':// x-1 Displayzeilen |
Decode64((unsigned char *) &tmp_char_arr2[0],sizeof(tmp_char_arr2),3,AnzahlEmpfangsBytes); |
RemoteTasten |= tmp_char_arr2[0]; |
DebugDisplayAnforderung = 1; |
break; |
case 't':// Motortest |
Decode64((unsigned char *) &MotorTest[0],sizeof(MotorTest),3,AnzahlEmpfangsBytes); |
break; |
case 'v': // Version-Anforderung und Ausbaustufe |
GetVersionAnforderung = 1; |
break; |
case 'g':// "Get"-Anforderung für Debug-Daten |
// Bei Get werden die vom PC einstellbaren Werte vom PC zurückgelesen |
DebugGetAnforderung = 1; |
break; |
case 'q':// "Get"-Anforderung für Settings |
// Bei Get werden die vom PC einstellbaren Werte vom PC zurückgelesen |
Decode64((unsigned char *) &tmp_char_arr2[0],sizeof(tmp_char_arr2),3,AnzahlEmpfangsBytes); |
if(tmp_char_arr2[0] != 0xff) |
{ |
if(tmp_char_arr2[0] > 5) tmp_char_arr2[0] = 5; |
ReadParameterSet(tmp_char_arr2[0], (unsigned char *) &EE_Parameter.Kanalbelegung[0], STRUCT_PARAM_LAENGE); |
SendOutData('L' + tmp_char_arr2[0] -1,MeineSlaveAdresse,(unsigned char *) &EE_Parameter.Kanalbelegung[0],STRUCT_PARAM_LAENGE); |
} |
else |
SendOutData('L' + GetActiveParamSetNumber()-1,MeineSlaveAdresse,(unsigned char *) &EE_Parameter.Kanalbelegung[0],STRUCT_PARAM_LAENGE); |
break; |
case 'l': |
case 'm': |
case 'n': |
case 'o': |
case 'p': // Parametersatz speichern |
Decode64((unsigned char *) &EE_Parameter.Kanalbelegung[0],STRUCT_PARAM_LAENGE,3,AnzahlEmpfangsBytes); |
WriteParameterSet(RxdBuffer[2] - 'l' + 1, (unsigned char *) &EE_Parameter.Kanalbelegung[0], STRUCT_PARAM_LAENGE); |
eeprom_write_byte(&EEPromArray[EEPROM_ADR_ACTIVE_SET], RxdBuffer[2] - 'l' + 1); // aktiven Datensatz merken |
Piep(GetActiveParamSetNumber()); |
break; |
} |
// DebugOut.AnzahlZyklen = Debug_Timer_Intervall; |
NeuerDatensatzEmpfangen = 0; |
} |
//############################################################################ |
//Routine für die Serielle Ausgabe |
int uart_putchar (char c) |
//############################################################################ |
{ |
if (c == '\n') |
uart_putchar('\r'); |
//Warten solange bis Zeichen gesendet wurde |
loop_until_bit_is_set(USR, UDRE); |
//Ausgabe des Zeichens |
UDR = c; |
return (0); |
} |
// -------------------------------------------------------------------------- |
void WriteProgramData(unsigned int pos, unsigned char wert) |
{ |
//if (ProgramLocation == IN_RAM) Buffer[pos] = wert; |
// else eeprom_write_byte(&EE_Buffer[pos], wert); |
// Buffer[pos] = wert; |
} |
//############################################################################ |
//INstallation der Seriellen Schnittstelle |
void UART_Init (void) |
//############################################################################ |
{ |
//Enable TXEN im Register UCR TX-Data Enable & RX Enable |
UCR=(1 << TXEN) | (1 << RXEN); |
// UART Double Speed (U2X) |
USR |= (1<<U2X); |
// RX-Interrupt Freigabe |
UCSRB |= (1<<RXCIE); |
// TX-Interrupt Freigabe |
UCSRB |= (1<<TXCIE); |
//Teiler wird gesetzt |
UBRR=(SYSCLK / (BAUD_RATE * 8L) - 1); |
//UBRR = 33; |
//öffnet einen Kanal für printf (STDOUT) |
//fdevopen (uart_putchar, 0); |
//sbi(PORTD,4); |
Debug_Timer = SetDelay(200); |
} |
//--------------------------------------------------------------------------------------------- |
void DatenUebertragung(void) |
{ |
static char dis_zeile = 0; |
if(!UebertragungAbgeschlossen) return; |
if(DebugGetAnforderung && UebertragungAbgeschlossen) // Bei Get werden die vom PC einstellbaren Werte vom PC zurückgelesen |
{ |
SendOutData('G',MeineSlaveAdresse,(unsigned char *) &DebugIn,sizeof(DebugIn)); |
DebugGetAnforderung = 0; |
} |
if((CheckDelay(Debug_Timer) || DebugDataAnforderung) && UebertragungAbgeschlossen) |
{ |
SendOutData('D',MeineSlaveAdresse,(unsigned char *) &DebugOut,sizeof(DebugOut)); |
DebugDataAnforderung = 0; |
Debug_Timer = SetDelay(MIN_DEBUG_INTERVALL); |
} |
if(DebugDisplayAnforderung && UebertragungAbgeschlossen) |
{ |
Menu(); |
DebugDisplayAnforderung = 0; |
if(++dis_zeile == 4) dis_zeile = 0; |
SendOutData('0' + dis_zeile,0,&DisplayBuff[20 * dis_zeile],20); // DisplayZeile übertragen |
} |
if(GetVersionAnforderung && UebertragungAbgeschlossen) |
{ |
SendOutData('V',MeineSlaveAdresse,(unsigned char *) &VersionInfo,sizeof(VersionInfo)); |
GetVersionAnforderung = 0; |
} |
} |
/branches/v0.60_MicroMag3_Nick666/Neigung mit Acc/uart.h |
---|
0,0 → 1,95 |
#ifndef _UART_H |
#define _UART_H |
#define MAX_SENDE_BUFF 150 |
#define MAX_EMPFANGS_BUFF 150 |
void BearbeiteRxDaten(void); |
extern unsigned char DebugGetAnforderung; |
extern unsigned volatile char SendeBuffer[MAX_SENDE_BUFF]; |
extern unsigned volatile char RxdBuffer[MAX_EMPFANGS_BUFF]; |
extern unsigned volatile char UebertragungAbgeschlossen; |
extern unsigned volatile char PC_DebugTimeout; |
extern unsigned volatile char NeueKoordinateEmpfangen; |
extern unsigned char MeineSlaveAdresse; |
extern unsigned char PcZugriff; |
extern int Debug_Timer; |
extern void UART_Init (void); |
extern int uart_putchar (char c); |
extern void boot_program_page (uint32_t page, uint8_t *buf); |
extern void DatenUebertragung(void); |
extern void DecodeNMEA(void); |
extern unsigned char MotorTest[4]; |
struct str_DebugOut |
{ |
unsigned char Digital[13]; |
unsigned int AnzahlZyklen; |
unsigned int Zeit; |
unsigned char Sekunden; |
unsigned int Analog[16]; // Debugwerte |
}; |
extern struct str_DebugOut DebugOut; |
struct str_Debug |
{ |
unsigned char Digital[2]; |
unsigned char RemoteTasten; |
unsigned int Analog[4]; |
}; |
extern struct str_Debug DebugIn; |
struct str_VersionInfo |
{ |
unsigned char Hauptversion; |
unsigned char Nebenversion; |
unsigned char PCKompatibel; |
unsigned char Rserved[7]; |
}; |
extern struct str_VersionInfo VersionInfo; |
//Die Baud_Rate der Seriellen Schnittstelle ist 9600 Baud |
//#define BAUD_RATE 9600 //Baud Rate für die Serielle Schnittstelle |
//#define BAUD_RATE 14400 //Baud Rate für die Serielle Schnittstelle |
//#define BAUD_RATE 28800 //Baud Rate für die Serielle Schnittstelle |
//#define BAUD_RATE 38400 //Baud Rate für die Serielle Schnittstelle |
#define BAUD_RATE 57600 //Baud Rate für die Serielle Schnittstelle |
//Anpassen der seriellen Schnittstellen Register wenn ein ATMega128 benutzt wird |
#if defined (__AVR_ATmega128__) |
# define USR UCSR0A |
# define UCR UCSR0B |
# define UDR UDR0 |
# define UBRR UBRR0L |
# define EICR EICRB |
#endif |
#if defined (__AVR_ATmega32__) |
# define USR UCSRA |
# define UCR UCSRB |
# define UBRR UBRRL |
# define EICR EICRB |
# define INT_VEC_RX SIG_UART_RECV |
# define INT_VEC_TX SIG_UART_TRANS |
#endif |
#if defined (__AVR_ATmega644__) |
# define USR UCSR0A |
# define UCR UCSR0B |
# define UDR UDR0 |
# define UBRR UBRR0L |
# define EICR EICR0B |
# define TXEN TXEN0 |
# define RXEN RXEN0 |
# define RXCIE RXCIE0 |
# define TXCIE TXCIE0 |
# define U2X U2X0 |
# define UCSRB UCSR0B |
# define UDRE UDRE0 |
# define INT_VEC_RX SIG_USART_RECV |
# define INT_VEC_TX SIG_USART_TRANS |
#endif |
#endif //_UART_H |
/branches/v0.60_MicroMag3_Nick666/Neigung mit Acc/version.txt |
---|
0,0 → 1,49 |
------- |
V0.53 27.04.2007 H.Buss |
- erste öffentliche Version |
V0.53b 29.04.2007 H.Buss |
- der FAKTOR_I war versehentlich auf Null, dann liegt der MikroKopter nicht so hart in der Luft |
V0.53c 29.04.2007 H.Buss |
- es gib ein Menü, in dem die Werte der Kanäle nach Nick, Roll, Gas,... sortiert sind. |
Die angezeigten Werte waren nicht die Werte der Funke |
V0.54 01.05.2007 H.Buss |
- die Paramtersätze können jetzt vor dem Start ausgewählt werden |
Dazu wird beim Kalibrieren der Messwerte (Gashebel oben links) der Nick-Rollhebel abgefragt: |
2 3 4 |
1 x 5 |
- - - |
Bedeutet: Nick-Rollhebel Links Mitte = Setting:1 Links Oben = Setting:2 usw. |
- der Faktor_I für den Hauptregler ist hinzugekommen. Im Heading-Hold-Modus sollte er vergössert werden, was Stabilität bringt |
V0.55 14.05.2007 H.Buss |
- es können nun Servos an J3,J4,J5 mit den Kanälen 5-7 gesteuert werden |
V0.56 14.05.2007 H.Buss |
- es gab Probleme mit Funken, die mehr als 8 Kanäle haben, wenn mehrere Kanäle dann auf Null waren |
- Funken, die nicht bis +-120 aussteuern können, sollten jetzt auch gehen |
V0.57 24.05.2007 H.Buss |
- Der Höhenregler kann nun auch mittels Schalter bedient werden |
- Bug im Gier-Algorithmus behoben; Schnelles Gieren fürhrte dazu, dass der MK zu weit gedreht hat |
- Kompass-Einfluss dämpfen bei Neigung |
- Man kann zwischen Kompass FIX (Richtung beim Kalibrieren) und Variabel (einstellbar per Gier) wählen |
- Der Motortest vom Kopter-Tool geht jetzt |
- Man kann den Parametersätzen einen Namen geben |
- Das Kamerasetting ist unter Setting 2 defaultmässig integriert |
V0.58 30.05.2007 H.Buss |
- Der Höhenregler-Algorithmus wird nun umgangen, wenn der Höhenreglerschalter aus ist |
V0.60 17.08.2007 H.Buss |
- "Schwindel-Bug" behoben |
- Die Poti-Werte werden jetzt auf Unterlauf (<0) überprüft |
- Poti4 zugefügt |
- Es werden jetzt 8 Kanäle ausgewertet |
- Kamera-Servo (an J7) |
- Die Settings müssen überschrieben werden |
/branches/v0.60_MicroMag3_Nick666/Settings.h |
---|
--- _Settings.h (nonexistent) |
+++ _Settings.h (revision 298) |
@@ -0,0 +1,50 @@ |
+// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// Testmodi |
+// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+#define MOTOR_OFF 0 |
+#define MOTOR_TEST 0 |
+ |
+// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// Abstimmung |
+// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+#define ACC_AMPLIFY 16 |
+#define FAKTOR_P 1 |
+#define FAKTOR_I 0.0001 |
+ |
+ |
+// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// Debug-Interface |
+// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+#define SIO_DEBUG 1 // Soll der Debugger aktiviert sein? |
+#define MIN_DEBUG_INTERVALL 250 // in diesem Intervall werden Degugdaten ohne Aufforderung gesendet |
+ |
+// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// Sender |
+// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+ #define K_NICK 0 |
+ #define K_ROLL 1 |
+ #define K_GAS 2 |
+ #define K_GIER 3 |
+ #define K_POTI1 4 |
+ #define K_POTI2 5 |
+ #define K_POTI3 6 |
+ #define K_POTI4 7 |
+// +++++++++++++++++++++++++++++++ |
+// + Getestete Settings: |
+// +++++++++++++++++++++++++++++++ |
+// Setting: Kamera |
+// Stick_P:3 |
+// Stick_D:0 |
+// Gyro_P: 175 |
+// Gyro_I: 175 |
+// Ki_Anteil: 10 |
+// +++++++++++++++++++++++++++++++ |
+// + Getestete Settings: |
+// +++++++++++++++++++++++++++++++ |
+// Setting: Normal |
+// Stick_P:2 |
+// Stick_D:8 |
+// Gyro_P: 80 |
+// Gyro_I: 150 |
+// Ki_Anteil: 5 |
+ |
/branches/v0.60_MicroMag3_Nick666/analog.c |
---|
0,0 → 1,155 |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Copyright (c) 04.2007 Holger Buss |
// + only for non-profit use |
// + www.MikroKopter.com |
// + see the File "License.txt" for further Informations |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
#include "main.h" |
volatile int Aktuell_Nick,Aktuell_Roll,Aktuell_Gier,Aktuell_ax, Aktuell_ay,Aktuell_az, UBat = 100; |
volatile int AccumulateNick = 0, AccumulateRoll = 0, AccumulateGier = 0; |
volatile int accumulate_AccRoll = 0,accumulate_AccNick = 0,accumulate_AccHoch = 0; |
volatile char MessanzahlNick = 0, MessanzahlRoll = 0, MessanzahlGier = 0; |
volatile char messanzahl_AccNick = 0, messanzahl_AccRoll = 0, messanzahl_AccHoch = 0; |
volatile long Luftdruck = 32000; |
volatile int StartLuftdruck; |
volatile unsigned int MessLuftdruck = 1023; |
unsigned char DruckOffsetSetting; |
volatile int HoeheD = 0; |
volatile char messanzahl_Druck; |
volatile int tmpLuftdruck; |
volatile unsigned int ZaehlMessungen = 0; |
//####################################################################################### |
// |
void ADC_Init(void) |
//####################################################################################### |
{ |
ADMUX = 0;//Referenz ist extern |
ADCSRA=(1<<ADEN)|(1<<ADSC)|(1<<ADATE)|(1<<ADPS2)|(1<<ADPS1)|(1<<ADPS0)|(1<<ADIE); |
//Free Running Mode, Division Factor 128, Interrupt on |
} |
void SucheLuftruckOffset(void) |
{ |
unsigned int off; |
for(off=0; off < 250;off++) |
{ |
OCR0A = off; |
Delay_ms(50); |
printf("."); |
if(MessLuftdruck < 900) break; |
} |
DruckOffsetSetting = off; |
Delay_ms(200); |
} |
//####################################################################################### |
// |
SIGNAL(SIG_ADC) |
//####################################################################################### |
{ |
static unsigned char kanal=0,state = 0; |
signed int wert; |
ANALOG_OFF; |
switch(state++) |
{ |
case 0: |
wert = (signed int) AdNeutralGier - ADC; |
AccumulateGier += wert; // |
MessanzahlGier++; |
Mess_Integral_Gier += wert;// / 16; |
Mess_Integral_Gier2 += wert; |
kanal = 1; |
ZaehlMessungen++; |
break; |
case 1: |
wert = (signed int) ADC - AdNeutralRoll; |
Mess_IntegralRoll += wert; |
Mess_IntegralRoll2 += wert; |
if(ADC < 10) wert = -700; |
if(ADC > 1000) wert = +700; |
AccumulateRoll += wert; |
MessanzahlRoll++; |
kanal = 2; |
break; |
case 2: |
wert = (signed int) ADC - AdNeutralNick; |
Mess_IntegralNick += wert; |
Mess_IntegralNick2 += wert; |
if(ADC < 10) wert = -700; |
if(ADC > 1000) wert = +700; |
AccumulateNick += wert; |
MessanzahlNick++; |
kanal = 4; |
break; |
case 3: |
UBat = (3 * UBat + ADC / 3) / 4;//(UBat + ((ADC * 39) / 256) + 19) / 2; |
kanal = 6; |
break; |
case 4: |
Aktuell_ay = NeutralAccY - ADC; |
accumulate_AccRoll += Aktuell_ay; |
messanzahl_AccRoll++; |
kanal = 7; |
break; |
case 5: |
Aktuell_ax = ADC - NeutralAccX; |
accumulate_AccNick += Aktuell_ax; |
messanzahl_AccNick++; |
kanal = 5; |
state = 6; |
break; |
case 6: |
accumulate_AccHoch = (signed int) ADC - NeutralAccZ; |
accumulate_AccHoch += abs(Aktuell_ay) / 4 + abs(Aktuell_ax) / 4; |
if(accumulate_AccHoch > 1) |
{ |
if(NeutralAccZ < 800) NeutralAccZ+= 0.02; |
} |
else if(accumulate_AccHoch < -1) |
{ |
if(NeutralAccZ > 600) NeutralAccZ-= 0.02; |
} |
messanzahl_AccHoch = 1; |
Aktuell_az = ADC; |
Mess_Integral_Hoch += accumulate_AccHoch; // Integrieren |
Mess_Integral_Hoch -= Mess_Integral_Hoch / 1024; // dämfen |
// Mess_Integral_Hoch -= Mess_Integral_Hoch / 512; // dämfen |
/* if(EE_Parameter.GlobalConfig & CFG_HOEHENREGELUNG) |
{ |
kanal = 3; |
state = 7; |
} |
else |
{ |
kanal = 0; |
state = 0; |
}*/ |
kanal = 3; |
state = 7; |
break; |
case 7: |
tmpLuftdruck += ADC; |
if(++messanzahl_Druck >= 5) |
{ |
MessLuftdruck = ADC; |
messanzahl_Druck = 0; |
HoeheD = (int)(StartLuftdruck - tmpLuftdruck - HoehenWert); // D-Anteil = neuerWert - AlterWert |
Luftdruck = (tmpLuftdruck + 3 * Luftdruck) / 4; |
HoehenWert = StartLuftdruck - Luftdruck; |
tmpLuftdruck = 0; |
} |
kanal = 0; |
state = 0; |
break; |
default: |
kanal = 0; |
state = 0; |
break; |
} |
ADMUX = kanal; |
ANALOG_ON; |
} |
/branches/v0.60_MicroMag3_Nick666/analog.h |
---|
0,0 → 1,23 |
/*####################################################################################### |
#######################################################################################*/ |
extern volatile int UBat; |
extern volatile int AccumulateNick, AccumulateRoll, AccumulateGier,accumulate_AccRoll,accumulate_AccNick,accumulate_AccHoch; |
extern volatile char MessanzahlNick, MessanzahlRoll, MessanzahlGier,messanzahl_AccNick, messanzahl_AccRoll,messanzahl_AccHoch; |
extern volatile int Aktuell_Nick,Aktuell_Roll,Aktuell_Gier,Aktuell_ax, Aktuell_ay,Aktuell_az; |
extern volatile long Luftdruck; |
extern volatile char messanzahl_Druck; |
extern volatile unsigned int ZaehlMessungen; |
extern unsigned char DruckOffsetSetting; |
extern volatile int HoeheD; |
extern volatile unsigned int MessLuftdruck; |
extern volatile int StartLuftdruck; |
extern unsigned int ReadADC(unsigned char adc_input); |
extern void ADC_Init(void); |
extern void SucheLuftruckOffset(void); |
#define ANALOG_OFF ADCSRA=0 |
#define ANALOG_ON ADCSRA=(1<<ADEN)|(1<<ADSC)|(1<<ADATE)|(1<<ADPS2)|(1<<ADPS1)|(1<<ADPS0)|(1<<ADIE) |
/branches/v0.60_MicroMag3_Nick666/compass.c |
---|
0,0 → 1,150 |
/* |
Copyright 2007, Niklas Nold |
This program (files compass.c and compass.h) is free software; you can redistribute it and/or modify |
it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; |
either version 3 of the License, or (at your option) any later version. |
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; |
without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License |
along with this program. If not, see <http://www.gnu.org/licenses/>. |
Please note: All the other files for the project "Mikrokopter" by H. Buss are under the license (license_buss.txt) published by www.mikrokopter.de |
*/ |
#include "main.h" |
MM3_struct MM3; |
//############################################################################ |
//Initialisierung der SPI-Schnittstelle |
void init_spi(void) |
//############################################################################ |
{ |
SPCR = (1<<SPIE)|(1<<SPE)|(1<<MSTR)|(1<<SPR1)|(1<<SPR0); //Interrupt an, Master, 156 kHz Oszillator |
//SPSR = (1<<SPI2X); |
DDRB |= (1<<PB7)|(1<<PB5)|(1<<PB2); // J8, MOSI, SCK Ausgang |
PORTD &= ~(1<<PD3); // J5 auf Low |
MM3.AXIS = MM3_X; |
MM3.STATE = MM3_RESET; |
} |
//############################################################################ |
//Wird in der SIGNAL (SIG_OVERFLOW0) aufgerufen |
void MM3_timer0(void) |
//############################################################################ |
{ |
switch (MM3.STATE) |
{ |
case MM3_RESET: |
PORTB |= (1<<PB2); // J8 auf High, MM3 Reset |
MM3.STATE = MM3_START_TRANSFER; |
return; |
case MM3_START_TRANSFER: |
PORTB &= ~(1<<PB2); // J8 auf Low (war ~125 µs auf High) |
if (MM3.AXIS == MM3_X) SPDR = 0x51; // Schreiben ins SPDR löst automatisch Übertragung (MOSI und MISO) aus |
else if (MM3.AXIS == MM3_Y) SPDR = 0x52; // Micromag Period Select ist auf 1024 (0x50) |
else if (MM3.AXIS == MM3_Z) SPDR = 0x53; // 1: x-Achse, 2: Y-Achse, 3: Z-Achse |
MM3.DRDY = SetDelay(15); // Laut Datenblatt max. Zeit bis Messung fertig (bei PS 1024) |
MM3.STATE = MM3_WAIT_DRDY; |
return; |
case MM3_WAIT_DRDY: |
if (CheckDelay(MM3.DRDY)) {SPDR = 0x00;MM3.STATE = MM3_DRDY;} // Irgendwas ins SPDR, damit Übertragung ausgelöst wird, wenn Wartezeit vorbei |
return; // Jetzt gehts weiter in SIGNAL (SIG_SPI) |
case MM3_TILT: // Zeitnahe Speicherung der aktuellen Neigung in ° |
MM3.NickGrad = IntegralNick/(EE_Parameter.UserParam1*8); |
MM3.RollGrad = IntegralRoll/(EE_Parameter.UserParam2*8); |
MM3.AXIS = MM3_X; |
MM3.STATE = MM3_RESET; |
return; |
} |
} |
//############################################################################ |
//SPI byte ready |
SIGNAL (SIG_SPI) |
//############################################################################ |
{ |
switch (MM3.STATE) |
{ |
case MM3_DRDY: // 1. Byte ist da, abspeichern, an die MSB-Stelle rücken |
if (MM3.AXIS == MM3_X) |
{ |
MM3.x_axis = SPDR; |
MM3.x_axis <<= 8; |
} |
else if (MM3.AXIS == MM3_Y) |
{ |
MM3.y_axis = SPDR; |
MM3.y_axis <<= 8; |
} |
else // if (MM3.AXIS == MM3_Z) |
{ |
MM3.z_axis = SPDR; |
MM3.z_axis <<= 8; |
} |
SPDR=0x00; // Übertragung von 2. Byte auslösen |
MM3.STATE=MM3_BYTE2; |
return; |
case MM3_BYTE2: // 2. Byte der entsprechenden Achse ist da |
if (MM3.AXIS == MM3_X) |
{ |
MM3.x_axis |= SPDR; |
MM3.x_axis -= OFF_X; // Sofort Offset aus der Kalibrierung berücksichtigen |
MM3.AXIS = MM3_Y; |
MM3.STATE = MM3_RESET; |
} |
else if (MM3.AXIS == MM3_Y) |
{ |
MM3.y_axis |= SPDR; |
MM3.y_axis -= OFF_Y; |
MM3.AXIS = MM3_Z; |
MM3.STATE = MM3_RESET; |
} |
else // if (MM3.AXIS == MM3_Z) |
{ |
MM3.z_axis |= SPDR; |
MM3.z_axis -= OFF_Z; |
MM3.STATE = MM3_TILT; |
} |
return; |
} |
} |
signed int MM3_heading(void) |
{ |
float sin_nick, cos_nick, sin_roll, cos_roll; |
signed int x_corr, y_corr; |
signed int heading; |
// Berechung von sinus und cosinus |
sin_nick = sin_f(MM3.NickGrad); |
cos_nick = cos_f(MM3.NickGrad); |
sin_roll = sin_f(MM3.RollGrad); |
cos_roll = cos_f(MM3.RollGrad); |
// Neigungskompensation |
x_corr = (cos_nick * MM3.x_axis) + (((sin_roll * MM3.y_axis) - (cos_roll * MM3.z_axis)) * sin_nick); |
y_corr = ((cos_roll * MM3.y_axis) + (sin_roll * MM3.z_axis)); |
// Winkelberechnung |
heading = atan2_i(x_corr, y_corr); |
return (heading); |
} |
/branches/v0.60_MicroMag3_Nick666/compass.h |
---|
0,0 → 1,40 |
typedef struct |
{ |
uint8_t STATE; |
unsigned int DRDY; |
uint8_t AXIS; |
signed int x_axis; |
signed int y_axis; |
signed int z_axis; |
signed int NickGrad; |
signed int RollGrad; |
}MM3_struct; |
extern MM3_struct MM3; |
void init_spi(void); |
void MM3_timer0(void); |
signed int MM3_heading(void); |
#define Int2Grad_Faktor 1024 |
// Die Werte der Statemachine |
#define MM3_RESET 0 |
#define MM3_START_TRANSFER 1 |
#define MM3_WAIT_DRDY 2 |
#define MM3_DRDY 4 |
#define MM3_BYTE2 8 |
#define MM3_X 16 |
#define MM3_Y 32 |
#define MM3_Z 64 |
#define MM3_TILT 128 |
// Die Werte der Kompasskalibrierung |
// OFFSET: (Maximaler Wert + minimaler Wert) / 2 |
#define OFF_X 0 |
#define OFF_Y 0 |
#define OFF_Z 0 |
/branches/v0.60_MicroMag3_Nick666/eeprom.c |
---|
--- fc.c (nonexistent) |
+++ fc.c (revision 298) |
@@ -0,0 +1,801 @@ |
+/*####################################################################################### |
+Flight Control |
+#######################################################################################*/ |
+// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// + Copyright (c) 04.2007 Holger Buss |
+// + Nur für den privaten Gebrauch |
+// + www.MikroKopter.com |
+// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// + Es gilt für das gesamte Projekt (Hardware, Software, Binärfiles, Sourcecode und Dokumentation), |
+// + dass eine Nutzung (auch auszugsweise) nur für den privaten (nicht-kommerziellen) Gebrauch zulässig ist. |
+// + Sollten direkte oder indirekte kommerzielle Absichten verfolgt werden, ist mit uns (info@mikrokopter.de) Kontakt |
+// + bzgl. der Nutzungsbedingungen aufzunehmen. |
+// + Eine kommerzielle Nutzung ist z.B.Verkauf von MikroKoptern, Bestückung und Verkauf von Platinen oder Bausätzen, |
+// + Verkauf von Luftbildaufnahmen, usw. |
+// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// + Werden Teile des Quellcodes (mit oder ohne Modifikation) weiterverwendet oder veröffentlicht, |
+// + unterliegen sie auch diesen Nutzungsbedingungen und diese Nutzungsbedingungen incl. Copyright müssen dann beiliegen |
+// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// + Sollte die Software (auch auszugesweise) oder sonstige Informationen des MikroKopter-Projekts |
+// + auf anderen Webseiten oder sonstigen Medien veröffentlicht werden, muss unsere Webseite "http://www.mikrokopter.de" |
+// + eindeutig als Ursprung verlinkt werden |
+// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// + Keine Gewähr auf Fehlerfreiheit, Vollständigkeit oder Funktion |
+// + Benutzung auf eigene Gefahr |
+// + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden |
+// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// + Die Portierung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur |
+// + mit unserer Zustimmung zulässig |
+// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen |
+// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// + Redistributions of source code (with or without modifications) must retain the above copyright notice, |
+// + this list of conditions and the following disclaimer. |
+// + * Neither the name of the copyright holders nor the names of contributors may be used to endorse or promote products derived |
+// + from this software without specific prior written permission. |
+// + * The use of this project (hardware, software, binary files, sources and documentation) is only permittet |
+// + for non-commercial use (directly or indirectly) |
+// + Commercial use (for excample: selling of MikroKopters, selling of PCBs, assembly, ...) is only permitted |
+// + with our written permission |
+// + * If sources or documentations are redistributet on other webpages, out webpage (http://www.MikroKopter.de) must be |
+// + clearly linked as origin |
+// + * porting to systems other than hardware from www.mikrokopter.de is not allowed |
+// + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
+// + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
+// + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
+// + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
+// + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
+// + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
+// + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
+// + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
+// + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
+// + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
+// + POSSIBILITY OF SUCH DAMAGE. |
+// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+ |
+#include "main.h" |
+ |
+unsigned char h,m,s; |
+volatile unsigned char Timeout = 0; |
+volatile int MesswertNick,MesswertRoll,MesswertGier; |
+volatile int AdNeutralNick = 0,AdNeutralRoll = 0,AdNeutralGier = 0; |
+volatile int Mittelwert_AccNick, Mittelwert_AccRoll,Mittelwert_AccHoch, NeutralAccX=0, NeutralAccY=0; |
+volatile float NeutralAccZ = 0; |
+unsigned char CosinusNickWinkel = 0, CosinusRollWinkel = 0; |
+volatile long IntegralNick = 0,IntegralNick2 = 0; |
+volatile long IntegralRoll = 0,IntegralRoll2 = 0; |
+volatile long Integral_Gier = 0; |
+volatile long Mess_IntegralNick = 0,Mess_IntegralNick2 = 0; |
+volatile long Mess_IntegralRoll = 0,Mess_IntegralRoll2 = 0; |
+volatile long Mess_Integral_Gier = 0,Mess_Integral_Gier2 = 0; |
+volatile long Mess_Integral_Hoch = 0; |
+volatile int KompassValue = 0; |
+volatile int KompassStartwert = 0; |
+volatile int KompassRichtung = 0; |
+unsigned char MAX_GAS,MIN_GAS; |
+unsigned char Notlandung = 0; |
+unsigned char HoehenReglerAktiv = 0; |
+ |
+float GyroFaktor; |
+float IntegralFaktor; |
+ |
+volatile int DiffNick,DiffRoll; |
+int Poti1 = 0, Poti2 = 0, Poti3 = 0, Poti4 = 0; |
+volatile unsigned char Motor_Vorne,Motor_Hinten,Motor_Rechts,Motor_Links, Count; |
+unsigned char MotorWert[5]; |
+volatile unsigned char SenderOkay = 0; |
+int StickNick = 0,StickRoll = 0,StickGier = 0; |
+char MotorenEin = 0; |
+int HoehenWert = 0; |
+int SollHoehe = 0; |
+ |
+float Kp = FAKTOR_P; |
+float Ki = FAKTOR_I; |
+ |
+unsigned char Parameter_Luftdruck_D = 48; // Wert : 0-250 |
+unsigned char Parameter_MaxHoehe = 251; // Wert : 0-250 |
+unsigned char Parameter_Hoehe_P = 16; // Wert : 0-32 |
+unsigned char Parameter_Hoehe_ACC_Wirkung = 58; // Wert : 0-250 |
+unsigned char Parameter_KompassWirkung = 64; // Wert : 0-250 |
+unsigned char Parameter_Gyro_P = 50; // Wert : 10-250 |
+unsigned char Parameter_Gyro_I = 150; // Wert : 0-250 |
+unsigned char Parameter_Gier_P = 2; // Wert : 1-20 |
+unsigned char Parameter_I_Faktor = 10; // Wert : 1-20 |
+unsigned char Parameter_UserParam1 = 0; |
+unsigned char Parameter_UserParam2 = 0; |
+unsigned char Parameter_UserParam3 = 0; |
+unsigned char Parameter_UserParam4 = 0; |
+unsigned char Parameter_ServoNickControl = 100; |
+struct mk_param_struct EE_Parameter; |
+ |
+void Piep(unsigned char Anzahl) |
+{ |
+ while(Anzahl--) |
+ { |
+ if(MotorenEin) return; //auf keinen Fall im Flug! |
+ beeptime = 100; |
+ Delay_ms(250); |
+ } |
+} |
+ |
+//############################################################################ |
+// Nullwerte ermitteln |
+void SetNeutral(void) |
+//############################################################################ |
+{ |
+ unsigned int timer; |
+ NeutralAccX = 0; |
+ NeutralAccY = 0; |
+ NeutralAccZ = 0; |
+ AdNeutralNick = 0; |
+ AdNeutralRoll = 0; |
+ AdNeutralGier = 0; |
+ CalibrierMittelwert(); |
+ timer = SetDelay(5); |
+ while (!CheckDelay(timer)); |
+ CalibrierMittelwert(); |
+ if((EE_Parameter.GlobalConfig & CFG_HOEHENREGELUNG)) // Höhenregelung aktiviert? |
+ { |
+ if((MessLuftdruck > 950) || (MessLuftdruck < 750)) SucheLuftruckOffset(); |
+ } |
+ AdNeutralNick= abs(MesswertNick); |
+ AdNeutralRoll= abs(MesswertRoll); |
+ AdNeutralGier= abs(MesswertGier); |
+ NeutralAccY = abs(Mittelwert_AccRoll) / ACC_AMPLIFY; |
+ NeutralAccX = abs(Mittelwert_AccNick) / ACC_AMPLIFY; |
+ NeutralAccZ = Aktuell_az; |
+ |
+ Mess_IntegralNick = 0; |
+ Mess_IntegralNick2 = 0; |
+ Mess_IntegralRoll = 0; |
+ Mess_IntegralRoll2 = 0; |
+ Mess_Integral_Gier = 0; |
+ MesswertNick = 0; |
+ MesswertRoll = 0; |
+ MesswertGier = 0; |
+ StartLuftdruck = Luftdruck; |
+ HoeheD = 0; |
+ Mess_Integral_Hoch = 0; |
+ KompassStartwert = KompassValue; |
+ GPS_Neutral(); |
+ beeptime = 50; |
+} |
+ |
+//############################################################################ |
+// Bildet den Mittelwert aus den Messwerten |
+void Mittelwert(void) |
+//############################################################################ |
+{ |
+ // ADC auschalten, damit die Werte sich nicht während der Berechnung ändern |
+ ANALOG_OFF; |
+ if(MessanzahlNick) (MesswertNick = AccumulateNick / MessanzahlNick); |
+ if(MessanzahlRoll) (MesswertRoll = AccumulateRoll / MessanzahlRoll); |
+ if(MessanzahlGier) (MesswertGier = AccumulateGier / MessanzahlGier); |
+ if(messanzahl_AccNick) Mittelwert_AccNick = ((long)Mittelwert_AccNick * 7 + ((ACC_AMPLIFY * (long)accumulate_AccNick) / messanzahl_AccNick)) / 8L; |
+ if(messanzahl_AccRoll) Mittelwert_AccRoll = ((long)Mittelwert_AccRoll * 7 + ((ACC_AMPLIFY * (long)accumulate_AccRoll) / messanzahl_AccRoll)) / 8L; |
+ if(messanzahl_AccHoch) Mittelwert_AccHoch = ((long)Mittelwert_AccHoch * 7 + ((long)accumulate_AccHoch) / messanzahl_AccHoch) / 8L; |
+ AccumulateNick = 0; MessanzahlNick = 0; |
+ AccumulateRoll = 0; MessanzahlRoll = 0; |
+ AccumulateGier = 0; MessanzahlGier = 0; |
+ accumulate_AccRoll = 0;messanzahl_AccRoll = 0; |
+ accumulate_AccNick = 0;messanzahl_AccNick = 0; |
+ accumulate_AccHoch = 0;messanzahl_AccHoch = 0; |
+ Integral_Gier = Mess_Integral_Gier; |
+// Integral_Gier2 = Mess_Integral_Gier2; |
+ IntegralNick = Mess_IntegralNick; |
+ IntegralRoll = Mess_IntegralRoll; |
+ IntegralNick2 = Mess_IntegralNick2; |
+ IntegralRoll2 = Mess_IntegralRoll2; |
+ // ADC einschalten |
+ ANALOG_ON; |
+ |
+//------------------------------------------------------------------------------ |
+ if(MesswertNick > 200) MesswertNick += 4 * (MesswertNick - 200); |
+ else |
+ if(MesswertNick < -200) MesswertNick += 4 * (MesswertNick + 200); |
+ |
+ if(MesswertRoll > 200) MesswertRoll += 4 * (MesswertRoll - 200); |
+ else |
+ if(MesswertRoll < -200) MesswertRoll += 4 * (MesswertRoll + 200); |
+//------------------------------------------------------------------------------ |
+ if(Poti1 < PPM_in[EE_Parameter.Kanalbelegung[K_POTI1]] + 110) Poti1++; else if(Poti1 > PPM_in[EE_Parameter.Kanalbelegung[K_POTI1]] + 110 && Poti1) Poti1--; |
+ if(Poti2 < PPM_in[EE_Parameter.Kanalbelegung[K_POTI2]] + 110) Poti2++; else if(Poti2 > PPM_in[EE_Parameter.Kanalbelegung[K_POTI2]] + 110 && Poti2) Poti2--; |
+ if(Poti3 < PPM_in[EE_Parameter.Kanalbelegung[K_POTI3]] + 110) Poti3++; else if(Poti3 > PPM_in[EE_Parameter.Kanalbelegung[K_POTI3]] + 110 && Poti3) Poti3--; |
+ if(Poti4 < PPM_in[EE_Parameter.Kanalbelegung[K_POTI4]] + 110) Poti4++; else if(Poti4 > PPM_in[EE_Parameter.Kanalbelegung[K_POTI4]] + 110 && Poti4) Poti4--; |
+ if(Poti1 < 0) Poti1 = 0; else if(Poti1 > 255) Poti1 = 255; |
+ if(Poti2 < 0) Poti2 = 0; else if(Poti2 > 255) Poti2 = 255; |
+ if(Poti3 < 0) Poti3 = 0; else if(Poti3 > 255) Poti3 = 255; |
+ if(Poti4 < 0) Poti4 = 0; else if(Poti4 > 255) Poti4 = 255; |
+} |
+ |
+//############################################################################ |
+// Messwerte beim Ermitteln der Nullage |
+void CalibrierMittelwert(void) |
+//############################################################################ |
+{ |
+ // ADC auschalten, damit die Werte sich nicht während der Berechnung ändern |
+ ANALOG_OFF; |
+ if(MessanzahlNick) (MesswertNick = AccumulateNick / MessanzahlNick); |
+ if(MessanzahlRoll) (MesswertRoll = AccumulateRoll / MessanzahlRoll); |
+ if(MessanzahlGier) (MesswertGier = AccumulateGier / MessanzahlGier); |
+ if(messanzahl_AccNick) Mittelwert_AccNick = ((ACC_AMPLIFY * (long)accumulate_AccNick) / messanzahl_AccNick); |
+ if(messanzahl_AccRoll) Mittelwert_AccRoll = (ACC_AMPLIFY * (long)accumulate_AccRoll) / messanzahl_AccRoll; |
+ if(messanzahl_AccHoch) Mittelwert_AccHoch = ((long)accumulate_AccHoch) / messanzahl_AccHoch; |
+ AccumulateNick = 0; MessanzahlNick = 0; |
+ AccumulateRoll = 0; MessanzahlRoll = 0; |
+ AccumulateGier = 0; MessanzahlGier = 0; |
+ accumulate_AccRoll = 0;messanzahl_AccRoll = 0; |
+ accumulate_AccNick = 0;messanzahl_AccNick = 0; |
+ accumulate_AccHoch = 0;messanzahl_AccHoch = 0; |
+ // ADC einschalten |
+ ANALOG_ON; |
+ if(Poti1 < PPM_in[EE_Parameter.Kanalbelegung[K_POTI1]] + 110) Poti1++; else if(Poti1 > PPM_in[EE_Parameter.Kanalbelegung[K_POTI1]] + 110 && Poti1) Poti1--; |
+ if(Poti2 < PPM_in[EE_Parameter.Kanalbelegung[K_POTI2]] + 110) Poti2++; else if(Poti2 > PPM_in[EE_Parameter.Kanalbelegung[K_POTI2]] + 110 && Poti2) Poti2--; |
+ if(Poti3 < PPM_in[EE_Parameter.Kanalbelegung[K_POTI3]] + 110) Poti3++; else if(Poti3 > PPM_in[EE_Parameter.Kanalbelegung[K_POTI3]] + 110 && Poti3) Poti3--; |
+ if(Poti4 < PPM_in[EE_Parameter.Kanalbelegung[K_POTI4]] + 110) Poti4++; else if(Poti4 > PPM_in[EE_Parameter.Kanalbelegung[K_POTI4]] + 110 && Poti4) Poti4--; |
+ if(Poti1 < 0) Poti1 = 0; else if(Poti1 > 255) Poti1 = 255; |
+ if(Poti2 < 0) Poti2 = 0; else if(Poti2 > 255) Poti2 = 255; |
+ if(Poti3 < 0) Poti3 = 0; else if(Poti3 > 255) Poti3 = 255; |
+ if(Poti4 < 0) Poti4 = 0; else if(Poti4 > 255) Poti4 = 255; |
+} |
+ |
+//############################################################################ |
+// Senden der Motorwerte per I2C-Bus |
+void SendMotorData(void) |
+//############################################################################ |
+{ |
+ if(MOTOR_OFF || !MotorenEin) |
+ { |
+ Motor_Hinten = 0; |
+ Motor_Vorne = 0; |
+ Motor_Rechts = 0; |
+ Motor_Links = 0; |
+ if(MotorTest[0]) Motor_Vorne = MotorTest[0]; |
+ if(MotorTest[1]) Motor_Hinten = MotorTest[1]; |
+ if(MotorTest[2]) Motor_Links = MotorTest[2]; |
+ if(MotorTest[3]) Motor_Rechts = MotorTest[3]; |
+ } |
+ |
+ DebugOut.Analog[12] = Motor_Vorne; |
+ DebugOut.Analog[13] = Motor_Hinten; |
+ DebugOut.Analog[14] = Motor_Links; |
+ DebugOut.Analog[15] = Motor_Rechts; |
+ |
+ //Start I2C Interrupt Mode |
+ twi_state = 0; |
+ motor = 0; |
+ i2c_start(); |
+} |
+ |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// + Konstanten |
+// + 0-250 -> normale Werte |
+// + 251 -> Poti1 |
+// + 252 -> Poti2 |
+// + 253 -> Poti3 |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+void DefaultKonstanten1(void) |
+{ |
+ EE_Parameter.Kanalbelegung[K_NICK] = 1; |
+ EE_Parameter.Kanalbelegung[K_ROLL] = 2; |
+ EE_Parameter.Kanalbelegung[K_GAS] = 3; |
+ EE_Parameter.Kanalbelegung[K_GIER] = 4; |
+ EE_Parameter.Kanalbelegung[K_POTI1] = 5; |
+ EE_Parameter.Kanalbelegung[K_POTI2] = 6; |
+ EE_Parameter.Kanalbelegung[K_POTI3] = 7; |
+ EE_Parameter.Kanalbelegung[K_POTI4] = 8; |
+ EE_Parameter.GlobalConfig = 0;//CFG_HOEHENREGELUNG | /*CFG_HOEHEN_SCHALTER |*/ CFG_KOMPASS_AKTIV | CFG_KOMPASS_FIX;//0x01; |
+ EE_Parameter.Hoehe_MinGas = 30; |
+ EE_Parameter.MaxHoehe = 251; // Wert : 0-32 251 -> Poti1 |
+ EE_Parameter.Hoehe_P = 10; // Wert : 0-32 |
+ EE_Parameter.Luftdruck_D = 70; // Wert : 0-250 |
+ EE_Parameter.Hoehe_ACC_Wirkung = 30; // Wert : 0-250 |
+ EE_Parameter.Hoehe_Verstaerkung = 2; // Wert : 0-50 |
+ EE_Parameter.Stick_P = 4; //2 // Wert : 1-6 |
+ EE_Parameter.Stick_D = 8; //8 // Wert : 0-64 |
+ EE_Parameter.Gier_P = 16; // Wert : 1-20 |
+ EE_Parameter.Gas_Min = 15; // Wert : 0-32 |
+ EE_Parameter.Gas_Max = 250; // Wert : 33-250 |
+ EE_Parameter.GyroAccFaktor = 26; // Wert : 1-64 |
+ EE_Parameter.KompassWirkung = 128; // Wert : 0-250 |
+ EE_Parameter.Gyro_P = 120; //80 // Wert : 0-250 |
+ EE_Parameter.Gyro_I = 150; // Wert : 0-250 |
+ EE_Parameter.UnterspannungsWarnung = 90; // Wert : 0-250 |
+ EE_Parameter.NotGas = 35; // Wert : 0-250 // Gaswert bei Empangsverlust |
+ EE_Parameter.NotGasZeit = 20; // Wert : 0-250 // Zeit bis auf NotGas geschaltet wird, wg. Rx-Problemen |
+ EE_Parameter.UfoAusrichtung = 0; // X oder + Formation |
+ EE_Parameter.I_Faktor = 5; |
+ EE_Parameter.UserParam1 = 0; //zur freien Verwendung |
+ EE_Parameter.UserParam2 = 0; //zur freien Verwendung |
+ EE_Parameter.UserParam3 = 0; //zur freien Verwendung |
+ EE_Parameter.UserParam4 = 0; //zur freien Verwendung |
+ EE_Parameter.ServoNickControl = 100; // Wert : 0-250 // Stellung des Servos |
+ EE_Parameter.ServoNickComp = 40; // Wert : 0-250 // Einfluss Gyro/Servo |
+ EE_Parameter.ServoNickCompInvert = 0; // Wert : 0-250 // Richtung Einfluss Gyro/Servo |
+ EE_Parameter.ServoNickMin = 50; // Wert : 0-250 // Anschlag |
+ EE_Parameter.ServoNickMax = 150; // Wert : 0-250 // Anschlag |
+ EE_Parameter.ServoNickRefresh = 5; |
+ memcpy(EE_Parameter.Name, "Normal\0", 12); |
+} |
+ |
+void DefaultKonstanten2(void) |
+{ |
+ EE_Parameter.Kanalbelegung[K_NICK] = 1; |
+ EE_Parameter.Kanalbelegung[K_ROLL] = 2; |
+ EE_Parameter.Kanalbelegung[K_GAS] = 3; |
+ EE_Parameter.Kanalbelegung[K_GIER] = 4; |
+ EE_Parameter.Kanalbelegung[K_POTI1] = 5; |
+ EE_Parameter.Kanalbelegung[K_POTI2] = 6; |
+ EE_Parameter.Kanalbelegung[K_POTI3] = 7; |
+ EE_Parameter.GlobalConfig = 0;//CFG_HOEHENREGELUNG | /*CFG_HOEHEN_SCHALTER |*/ CFG_KOMPASS_AKTIV;//0x01; |
+ EE_Parameter.Hoehe_MinGas = 30; |
+ EE_Parameter.MaxHoehe = 251; // Wert : 0-32 251 -> Poti1 |
+ EE_Parameter.Hoehe_P = 10; // Wert : 0-32 |
+ EE_Parameter.Luftdruck_D = 50; // Wert : 0-250 |
+ EE_Parameter.Hoehe_ACC_Wirkung = 50; // Wert : 0-250 |
+ EE_Parameter.Hoehe_Verstaerkung = 2; // Wert : 0-50 |
+ EE_Parameter.Stick_P = 4; //2 // Wert : 1-6 |
+ EE_Parameter.Stick_D = 0; //8 // Wert : 0-64 |
+ EE_Parameter.Gier_P = 16; // Wert : 1-20 |
+ EE_Parameter.Gas_Min = 15; // Wert : 0-32 |
+ EE_Parameter.Gas_Max = 250; // Wert : 33-250 |
+ EE_Parameter.GyroAccFaktor = 26; // Wert : 1-64 |
+ EE_Parameter.KompassWirkung = 128; // Wert : 0-250 |
+ EE_Parameter.Gyro_P = 175; //80 // Wert : 0-250 |
+ EE_Parameter.Gyro_I = 175; // Wert : 0-250 |
+ EE_Parameter.UnterspannungsWarnung = 90; // Wert : 0-250 |
+ EE_Parameter.NotGas = 35; // Wert : 0-250 // Gaswert bei Empangsverlust |
+ EE_Parameter.NotGasZeit = 20; // Wert : 0-250 // Zeit bis auf NotGas geschaltet wird, wg. Rx-Problemen |
+ EE_Parameter.UfoAusrichtung = 0; // X oder + Formation |
+ EE_Parameter.I_Faktor = 5; |
+ EE_Parameter.UserParam1 = 0; //zur freien Verwendung |
+ EE_Parameter.UserParam2 = 0; //zur freien Verwendung |
+ EE_Parameter.UserParam3 = 0; //zur freien Verwendung |
+ EE_Parameter.UserParam4 = 0; //zur freien Verwendung |
+ EE_Parameter.UserParam3 = 0; //zur freien Verwendung |
+ EE_Parameter.UserParam4 = 0; //zur freien Verwendung |
+ EE_Parameter.ServoNickControl = 100; // Wert : 0-250 // Stellung des Servos |
+ EE_Parameter.ServoNickComp = 40; // Wert : 0-250 // Einfluss Gyro/Servo |
+ EE_Parameter.ServoNickCompInvert = 0; // Wert : 0-250 // Richtung Einfluss Gyro/Servo |
+ EE_Parameter.ServoNickMin = 50; // Wert : 0-250 // Anschlag |
+ EE_Parameter.ServoNickMax = 150; // Wert : 0-250 // Anschlag |
+ EE_Parameter.ServoNickRefresh = 5; |
+ memcpy(EE_Parameter.Name, "Kamera\0", 12); |
+} |
+ |
+ |
+//############################################################################ |
+// Trägt ggf. das Poti als Parameter ein |
+void ParameterZuordnung(void) |
+//############################################################################ |
+{ |
+ |
+ #define CHK_POTI(b,a,min,max) { if(a > 250) { if(a == 251) b = Poti1; else if(a == 252) b = Poti2; else if(a == 253) b = Poti3; else if(a == 254) b = Poti4;} else b = a; if(b <= min) b = min; else if(b >= max) b = max;} |
+ CHK_POTI(Parameter_MaxHoehe,EE_Parameter.MaxHoehe,0,255); |
+ CHK_POTI(Parameter_Luftdruck_D,EE_Parameter.Luftdruck_D,0,100); |
+ CHK_POTI(Parameter_Hoehe_P,EE_Parameter.Hoehe_P,0,100); |
+ CHK_POTI(Parameter_Hoehe_ACC_Wirkung,EE_Parameter.Hoehe_ACC_Wirkung,0,255); |
+ CHK_POTI(Parameter_KompassWirkung,EE_Parameter.KompassWirkung,0,255); |
+ CHK_POTI(Parameter_Gyro_P,EE_Parameter.Gyro_P,10,255); |
+ CHK_POTI(Parameter_Gyro_I,EE_Parameter.Gyro_I,0,255); |
+ CHK_POTI(Parameter_I_Faktor,EE_Parameter.I_Faktor,0,255); |
+ CHK_POTI(Parameter_UserParam1,EE_Parameter.UserParam1,0,255); |
+ CHK_POTI(Parameter_UserParam2,EE_Parameter.UserParam2,0,255); |
+ CHK_POTI(Parameter_UserParam3,EE_Parameter.UserParam3,0,255); |
+ CHK_POTI(Parameter_UserParam4,EE_Parameter.UserParam4,0,255); |
+ |
+ CHK_POTI(Parameter_ServoNickControl,EE_Parameter.ServoNickControl,0,255); |
+ CHK_POTI(Parameter_ServoNickControl,EE_Parameter.ServoNickControl,0,255); |
+ CHK_POTI(Parameter_ServoNickControl,EE_Parameter.ServoNickControl,0,255); |
+ |
+ Ki = (float) Parameter_I_Faktor * 0.0001; |
+ MAX_GAS = EE_Parameter.Gas_Max; |
+ MIN_GAS = EE_Parameter.Gas_Min; |
+} |
+ |
+ |
+//############################################################################ |
+// |
+void MotorRegler(void) |
+//############################################################################ |
+{ |
+ int motorwert,pd_ergebnis,h,tmp_int; |
+ int GierMischanteil,GasMischanteil; |
+ static long SummeNick=0,SummeRoll=0; |
+ static long sollGier = 0,tmp_long,tmp_long2; |
+ static int IntegralFehlerNick = 0; |
+ static int IntegralFehlerRoll = 0; |
+ static unsigned int RcLostTimer; |
+ static unsigned char delay_neutral = 0; |
+ static unsigned char delay_einschalten = 0,delay_ausschalten = 0; |
+ static unsigned int modell_fliegt = 0; |
+ static int hoehenregler = 0; |
+ static char TimerWerteausgabe = 0; |
+ static char NeueKompassRichtungMerken = 0; |
+ Mittelwert(); |
+ |
+ GRN_ON; |
+ |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// Gaswert ermitteln |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+ GasMischanteil = PPM_in[EE_Parameter.Kanalbelegung[K_GAS]] + 120; |
+ if(GasMischanteil < 0) GasMischanteil = 0; |
+ |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// Emfang schlecht |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+ if(SenderOkay < 100) |
+ { |
+ if(!PcZugriff) beeptime = 500; |
+ if(RcLostTimer) RcLostTimer--; |
+ else |
+ { |
+ MotorenEin = 0; |
+ Notlandung = 0; |
+ } |
+ ROT_ON; |
+ if(modell_fliegt > 2000) // wahrscheinlich in der Luft --> langsam absenken |
+ { |
+ GasMischanteil = EE_Parameter.NotGas; |
+ Notlandung = 1; |
+ PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] = 0; |
+ PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] = 0; |
+ PPM_in[EE_Parameter.Kanalbelegung[K_GIER]] = 0; |
+/* Poti1 = 65; |
+ Poti2 = 48; |
+ Poti3 = 0; |
+*/ } |
+ else MotorenEin = 0; |
+ } |
+ else |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// Emfang gut |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+ if(SenderOkay > 140) |
+ { |
+ Notlandung = 0; |
+ RcLostTimer = EE_Parameter.NotGasZeit * 50; |
+ if(GasMischanteil > 40) |
+ { |
+ if(modell_fliegt < 0xffff) modell_fliegt++; |
+ } |
+ if((modell_fliegt < 200) || (GasMischanteil < 40)) |
+ { |
+ SummeNick = 0; |
+ SummeRoll = 0; |
+ Mess_Integral_Gier = 0; |
+ Mess_Integral_Gier2 = 0; |
+ } |
+ if((GasMischanteil > 200) && MotorenEin == 0) |
+ { |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// auf Nullwerte kalibrieren |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+ if(PPM_in[EE_Parameter.Kanalbelegung[K_GIER]] > 75) // Neutralwerte |
+ { |
+ unsigned char setting; |
+ if(++delay_neutral > 200) // nicht sofort |
+ { |
+ GRN_OFF; |
+ SetNeutral(); |
+ MotorenEin = 0; |
+ delay_neutral = 0; |
+ modell_fliegt = 0; |
+ if(PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] > 70 || abs(PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]]) > 70) |
+ { |
+ if(PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] > 70 && PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] < 70) setting = 1; |
+ if(PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] > 70 && PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] > 70) setting = 2; |
+ if(PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] < 70 && PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] > 70) setting = 3; |
+ if(PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] <-70 && PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] > 70) setting = 4; |
+ if(PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] <-70 && PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] < 70) setting = 5; |
+ eeprom_write_byte(&EEPromArray[EEPROM_ADR_ACTIVE_SET], setting); // aktiven Datensatz merken |
+ } |
+ ReadParameterSet(GetActiveParamSetNumber(), (unsigned char *) &EE_Parameter.Kanalbelegung[0], STRUCT_PARAM_LAENGE); |
+ Piep(GetActiveParamSetNumber()); |
+ if((EE_Parameter.GlobalConfig & CFG_HOEHENREGELUNG)) // Höhenregelung aktiviert? |
+ { |
+ if((MessLuftdruck > 950) || (MessLuftdruck < 750)) SucheLuftruckOffset(); |
+ } |
+ } |
+ } |
+ else delay_neutral = 0; |
+ } |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// Gas ist unten |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+ if(GasMischanteil < 35) |
+ { |
+ // Starten |
+ if(PPM_in[EE_Parameter.Kanalbelegung[K_GIER]] < -75) |
+ { |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// Einschalten |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+ if(++delay_einschalten > 200) |
+ { |
+ delay_einschalten = 200; |
+ modell_fliegt = 1; |
+ MotorenEin = 1; |
+ sollGier = 0; |
+ Mess_Integral_Gier = 0; |
+ Mess_Integral_Gier2 = 0; |
+ Mess_IntegralNick = 0; |
+ Mess_IntegralRoll = 0; |
+ Mess_IntegralNick2 = IntegralNick; |
+ Mess_IntegralRoll2 = IntegralRoll; |
+ SummeNick = 0; |
+ SummeRoll = 0; |
+ } |
+ } |
+ else delay_einschalten = 0; |
+ //Auf Neutralwerte setzen |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// Auschalten |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+ if(PPM_in[EE_Parameter.Kanalbelegung[K_GIER]] > 75) |
+ { |
+ if(++delay_ausschalten > 200) // nicht sofort |
+ { |
+ MotorenEin = 0; |
+ delay_ausschalten = 200; |
+ modell_fliegt = 0; |
+ } |
+ } |
+ else delay_ausschalten = 0; |
+ } |
+ } |
+ |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// neue Werte von der Funke |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+ if(!NewPpmData-- || Notlandung) |
+ { |
+ ParameterZuordnung(); |
+ StickNick = PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] * EE_Parameter.Stick_P; |
+ StickNick += PPM_diff[EE_Parameter.Kanalbelegung[K_NICK]] * EE_Parameter.Stick_D; |
+ StickRoll = PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] * EE_Parameter.Stick_P; |
+ StickRoll += PPM_diff[EE_Parameter.Kanalbelegung[K_ROLL]] * EE_Parameter.Stick_D; |
+ StickGier = -PPM_in[EE_Parameter.Kanalbelegung[K_GIER]]; |
+ |
+ GyroFaktor = ((float)Parameter_Gyro_P + 10.0) / 256.0; |
+ IntegralFaktor = ((float) Parameter_Gyro_I) / 44000; |
+ |
+ if(EE_Parameter.GlobalConfig & CFG_HEADING_HOLD) IntegralFaktor = 0; |
+ if(GyroFaktor < 0) GyroFaktor = 0; |
+ if(IntegralFaktor < 0) IntegralFaktor = 0; |
+ } |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// Bei Empfangsausfall im Flug |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+ if(Notlandung) |
+ { |
+ StickGier = 0; |
+ StickNick = 0; |
+ StickRoll = 0; |
+ GyroFaktor = 0.1; |
+ IntegralFaktor = 0.005; |
+ } |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// Gyro-Drift kompensieren |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+#define DRIFT_FAKTOR 3 |
+ if(ZaehlMessungen >= 1000 / DRIFT_FAKTOR) |
+ { |
+ IntegralFehlerNick = IntegralNick2 - IntegralNick; |
+ IntegralFehlerRoll = IntegralRoll2 - IntegralRoll; |
+ ZaehlMessungen = 0; |
+ if(IntegralFehlerNick > 500/DRIFT_FAKTOR) AdNeutralNick++; |
+ if(IntegralFehlerNick < -500/DRIFT_FAKTOR) AdNeutralNick--; |
+ if(IntegralFehlerRoll > 500/DRIFT_FAKTOR) AdNeutralRoll++; |
+ if(IntegralFehlerRoll < -500/DRIFT_FAKTOR) AdNeutralRoll--; |
+ //if(Mess_Integral_Gier2 > 500/DRIFT_FAKTOR) AdNeutralGier--; |
+ //if(Mess_Integral_Gier2 <-500/DRIFT_FAKTOR) AdNeutralGier++; |
+ ANALOG_OFF; // ADC ausschalten, damit die Werte sich nicht während der Berechnung ändern |
+ Mess_IntegralNick2 = IntegralNick; |
+ Mess_IntegralRoll2 = IntegralRoll; |
+ Mess_Integral_Gier2 = Integral_Gier; |
+ ANALOG_ON; // ADC einschalten |
+ } |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// Integrale auf ACC-Signal abgleichen |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+ tmp_long = (long)(IntegralNick / EE_Parameter.GyroAccFaktor - (long)Mittelwert_AccNick) / 16; |
+ tmp_long2 = (long)(IntegralRoll / EE_Parameter.GyroAccFaktor - (long)Mittelwert_AccRoll) / 16; |
+#define AUSGLEICH 500 |
+ if(tmp_long > AUSGLEICH) tmp_long = AUSGLEICH; |
+ if(tmp_long < -AUSGLEICH) tmp_long =-AUSGLEICH; |
+ if(tmp_long2 > AUSGLEICH) tmp_long2 = AUSGLEICH; |
+ if(tmp_long2 <-AUSGLEICH) tmp_long2 =-AUSGLEICH; |
+ ANALOG_OFF; // ADC ausschalten, damit die Werte sich nicht während der Berechnung ändern |
+ Mess_IntegralNick -= tmp_long; |
+ Mess_IntegralRoll -= tmp_long2; |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// Gieren |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+ sollGier = StickGier; |
+ if(abs(StickGier) > 35) |
+ { |
+ if(!(EE_Parameter.GlobalConfig & CFG_KOMPASS_FIX)) NeueKompassRichtungMerken = 1; |
+ } |
+ tmp_int = EE_Parameter.Gier_P * (sollGier * abs(sollGier)) / 256; // expo |
+ Mess_Integral_Gier -= tmp_int; |
+ if(Mess_Integral_Gier > 30000) Mess_Integral_Gier = 30000; // begrenzen |
+ if(Mess_Integral_Gier <-30000) Mess_Integral_Gier =-30000; |
+ |
+ ANALOG_ON; // ADC einschalten |
+ |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// Kompass |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+ if(KompassValue && (EE_Parameter.GlobalConfig & CFG_KOMPASS_AKTIV)) |
+ { |
+ if(NeueKompassRichtungMerken) |
+ { |
+ KompassStartwert = KompassValue; |
+ NeueKompassRichtungMerken = 0; |
+ } |
+ ANALOG_OFF; // ADC ausschalten, damit die Werte sich nicht während der Berechnung ändern |
+ Mess_Integral_Gier -= (KompassRichtung * Parameter_KompassWirkung) / 32; // nach Kompass ausrichten |
+ ANALOG_ON; // ADC einschalten |
+ } |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+ |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// Debugwerte zuordnen |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+DebugOut.Sekunden++; |
+ if(!TimerWerteausgabe--) |
+ { |
+ TimerWerteausgabe = 49; |
+// DebugOut.Analog[0] = MesswertNick; |
+// DebugOut.Analog[1] = MesswertRoll; |
+// DebugOut.Analog[2] = MesswertGier; |
+// DebugOut.Analog[0] = IntegralNick / EE_Parameter.GyroAccFaktor; |
+// DebugOut.Analog[1] = IntegralRoll / EE_Parameter.GyroAccFaktor; |
+ |
+ DebugOut.Analog[0] = MM3.NickGrad; |
+ DebugOut.Analog[1] = MM3.RollGrad; |
+ DebugOut.Analog[2] = Mittelwert_AccNick; |
+ DebugOut.Analog[3] = Mittelwert_AccRoll; |
+ DebugOut.Analog[4] = MesswertGier; |
+ DebugOut.Analog[5] = HoehenWert; |
+ DebugOut.Analog[6] = (Mess_Integral_Hoch / 512); |
+ DebugOut.Analog[7] = GasMischanteil; |
+ DebugOut.Analog[8] = KompassValue; |
+ |
+//DebugOut.Analog[8] = MM3_heading(); |
+DebugOut.Analog[9] = MM3.x_axis; |
+DebugOut.Analog[10] = MM3.y_axis; |
+DebugOut.Analog[11] = MM3.z_axis; |
+ |
+// DebugOut.Analog[9] = SollHoehe; |
+// DebugOut.Analog[10] = Mess_Integral_Gier / 128; |
+// DebugOut.Analog[11] = KompassStartwert; |
+// DebugOut.Analog[10] = Parameter_Gyro_I; |
+// DebugOut.Analog[10] = EE_Parameter.Gyro_I; |
+// DebugOut.Analog[9] = KompassRichtung; |
+// DebugOut.Analog[10] = GasMischanteil; |
+// DebugOut.Analog[3] = HoeheD * 32; |
+// DebugOut.Analog[4] = hoehenregler; |
+ } |
+ |
+ |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// Drehgeschwindigkeit und -winkel zu einem Istwert zusammenfassen |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+ MesswertNick = IntegralNick * IntegralFaktor + MesswertNick * GyroFaktor; |
+ MesswertRoll = IntegralRoll * IntegralFaktor + MesswertRoll * GyroFaktor; |
+ MesswertGier = MesswertGier * (GyroFaktor/2) + Integral_Gier * IntegralFaktor; |
+ // Maximalwerte abfangen |
+ #define MAX_SENSOR 2048 |
+ if(MesswertNick > MAX_SENSOR) MesswertNick = MAX_SENSOR; |
+ if(MesswertNick < -MAX_SENSOR) MesswertNick = -MAX_SENSOR; |
+ if(MesswertRoll > MAX_SENSOR) MesswertRoll = MAX_SENSOR; |
+ if(MesswertRoll < -MAX_SENSOR) MesswertRoll = -MAX_SENSOR; |
+ if(MesswertGier > MAX_SENSOR) MesswertGier = MAX_SENSOR; |
+ if(MesswertGier < -MAX_SENSOR) MesswertGier = -MAX_SENSOR; |
+ |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// Höhenregelung |
+// Die Höhenregelung schwächt lediglich das Gas ab, erhöht es allerdings nicht |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+//OCR0B = 180 - (Poti1 + 120) / 4; |
+//DruckOffsetSetting = OCR0B; |
+ if((EE_Parameter.GlobalConfig & CFG_HOEHENREGELUNG)) // Höhenregelung |
+ { |
+ int tmp_int; |
+ if(EE_Parameter.GlobalConfig & CFG_HOEHEN_SCHALTER) // Regler wird über Schalter gesteuert |
+ { |
+ if(Parameter_MaxHoehe < 50) |
+ { |
+ SollHoehe = HoehenWert - 20; // Parameter_MaxHoehe ist der PPM-Wert des Schalters |
+ HoehenReglerAktiv = 0; |
+ } |
+ else |
+ HoehenReglerAktiv = 1; |
+ } |
+ else |
+ { |
+ SollHoehe = Parameter_MaxHoehe * EE_Parameter.Hoehe_Verstaerkung - 20; |
+ HoehenReglerAktiv = 1; |
+ } |
+ |
+ if(Notlandung) SollHoehe = 0; |
+ h = HoehenWert; |
+ if((h > SollHoehe) && HoehenReglerAktiv) // zu hoch --> drosseln |
+ { h = ((h - SollHoehe) * (int) Parameter_Hoehe_P) / 16; // Differenz bestimmen --> P-Anteil |
+ h = GasMischanteil - h; // vom Gas abziehen |
+ h -= (HoeheD * Parameter_Luftdruck_D)/8; // D-Anteil |
+ tmp_int = ((Mess_Integral_Hoch / 512) * (signed long) Parameter_Hoehe_ACC_Wirkung) / 32; |
+ if(tmp_int > 50) tmp_int = 50; |
+ else if(tmp_int < -50) tmp_int = -50; |
+ h -= tmp_int; |
+ hoehenregler = (hoehenregler*15 + h) / 16; |
+ if(hoehenregler < EE_Parameter.Hoehe_MinGas) // nicht unter MIN |
+ { |
+ if(GasMischanteil >= EE_Parameter.Hoehe_MinGas) hoehenregler = EE_Parameter.Hoehe_MinGas; |
+ if(GasMischanteil < EE_Parameter.Hoehe_MinGas) hoehenregler = GasMischanteil; |
+ } |
+ if(hoehenregler > GasMischanteil) hoehenregler = GasMischanteil; // nicht mehr als Gas |
+ GasMischanteil = hoehenregler; |
+ } |
+ } |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// + Mischer und PI-Regler |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+ |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// Gier-Anteil |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+ GierMischanteil = MesswertGier - sollGier; // Regler für Gier |
+ if(GierMischanteil > 100) GierMischanteil = 100; |
+ if(GierMischanteil < -100) GierMischanteil = -100; |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// Nick-Achse |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+ DiffNick = Kp * (MesswertNick - (StickNick - GPS_Nick)); // Differenz bestimmen |
+ SummeNick += DiffNick; // I-Anteil |
+ if(SummeNick > 0) SummeNick-= (abs(SummeNick)/256 + 1); else SummeNick += abs(SummeNick)/256 + 1; |
+ if(SummeNick > 16000) SummeNick = 16000; |
+ if(SummeNick < -16000) SummeNick = -16000; |
+ pd_ergebnis = DiffNick + Ki * SummeNick; // PI-Regler für Nick |
+ // Motor Vorn |
+ motorwert = GasMischanteil + pd_ergebnis + GierMischanteil; // Mischer |
+ if ((motorwert < 0) | (GasMischanteil < 10)) motorwert = 0; |
+ else if(motorwert > MAX_GAS) motorwert = MAX_GAS; |
+ if (motorwert < MIN_GAS) motorwert = MIN_GAS; |
+ Motor_Vorne = motorwert; |
+ // Motor Heck |
+ motorwert = GasMischanteil - pd_ergebnis + GierMischanteil; |
+ if ((motorwert < 0) | (GasMischanteil < 10)) motorwert = 0; |
+ else if(motorwert > MAX_GAS) motorwert = MAX_GAS; |
+ if (motorwert < MIN_GAS) motorwert = MIN_GAS; |
+ Motor_Hinten = motorwert; |
+ |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+// Roll-Achse |
+// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
+ DiffRoll = Kp * (MesswertRoll - (StickRoll - GPS_Roll)); // Differenz bestimmen |
+ SummeRoll += DiffRoll; // I-Anteil |
+ if(SummeRoll > 0) SummeRoll-= (abs(SummeRoll)/256 + 1); else SummeRoll += abs(SummeRoll)/256 + 1; |
+ if(SummeRoll > 16000) SummeRoll = 16000; |
+ if(SummeRoll < -16000) SummeRoll = -16000; |
+ pd_ergebnis = DiffRoll + Ki * SummeRoll; // PI-Regler für Roll |
+ // Motor Links |
+ motorwert = GasMischanteil + pd_ergebnis - GierMischanteil; |
+ if ((motorwert < 0) | (GasMischanteil < 10)) motorwert = 0; |
+ else if(motorwert > MAX_GAS) motorwert = MAX_GAS; |
+ if (motorwert < MIN_GAS) motorwert = MIN_GAS; |
+ Motor_Links = motorwert; |
+ // Motor Rechts |
+ motorwert = GasMischanteil - pd_ergebnis - GierMischanteil; |
+ if ((motorwert < 0) | (GasMischanteil < 10)) motorwert = 0; |
+ else if(motorwert > MAX_GAS) motorwert = MAX_GAS; |
+ if (motorwert < MIN_GAS) motorwert = MIN_GAS; |
+ Motor_Rechts = motorwert; |
+ // +++++++++++++++++++++++++++++++++++++++++++++++ |
+ |
+} |
+ |
/branches/v0.60_MicroMag3_Nick666/fc.h |
---|
0,0 → 1,109 |
/*####################################################################################### |
Flight Control |
#######################################################################################*/ |
#ifndef _FC_H |
#define _FC_H |
extern volatile unsigned char Timeout; |
extern unsigned char Sekunde,Minute; |
extern volatile long IntegralNick,IntegralNick2; |
extern volatile long IntegralRoll,IntegralRoll2; |
extern volatile long Mess_IntegralNick,Mess_IntegralNick2; |
extern volatile long Mess_IntegralRoll,Mess_IntegralRoll2; |
extern volatile long Mess_Integral_Hoch; |
extern volatile long Integral_Gier,Mess_Integral_Gier,Mess_Integral_Gier2; |
extern volatile int KompassValue; |
extern volatile int KompassStartwert; |
extern volatile int KompassRichtung; |
extern int HoehenWert; |
extern int SollHoehe; |
extern volatile int MesswertNick,MesswertRoll,MesswertGier; |
extern volatile int AdNeutralNick,AdNeutralRoll,AdNeutralGier, Mittelwert_AccNick, Mittelwert_AccRoll; |
extern volatile int NeutralAccX, NeutralAccY,Mittelwert_AccHoch; |
extern volatile float NeutralAccZ; |
void MotorRegler(void); |
void SendMotorData(void); |
void CalibrierMittelwert(void); |
void Mittelwert(void); |
void SetNeutral(void); |
void Piep(unsigned char Anzahl); |
void DefaultKonstanten1(void); |
void DefaultKonstanten2(void); |
unsigned char h,m,s; |
volatile unsigned char Timeout ; |
unsigned char CosinusNickWinkel, CosinusRollWinkel; |
volatile long IntegralNick,IntegralNick2; |
volatile long IntegralRoll,IntegralRoll2; |
volatile long Integral_Gier; |
volatile long Mess_IntegralNick,Mess_IntegralNick2; |
volatile long Mess_IntegralRoll,Mess_IntegralRoll2; |
volatile long Mess_Integral_Gier; |
volatile int DiffNick,DiffRoll; |
extern int Poti1, Poti2, Poti3, Poti4; |
volatile unsigned char Motor_Vorne,Motor_Hinten,Motor_Rechts,Motor_Links, Count; |
unsigned char MotorWert[5]; |
volatile unsigned char SenderOkay; |
int StickNick,StickRoll,StickGier; |
char MotorenEin; |
extern void DefaultKonstanten(void); |
#define STRUCT_PARAM_LAENGE 58 |
struct mk_param_struct |
{ |
unsigned char Kanalbelegung[8]; // GAS[0], GIER[1],NICK[2], ROLL[3], POTI1, POTI2, POTI3 |
unsigned char GlobalConfig; // 0x01=Höhenregler aktiv,0x02=Kompass aktiv, 0x04=GPS aktiv, 0x08=Heading Hold aktiv |
unsigned char Hoehe_MinGas; // Wert : 0-100 |
unsigned char Luftdruck_D; // Wert : 0-250 |
unsigned char MaxHoehe; // Wert : 0-32 |
unsigned char Hoehe_P; // Wert : 0-32 |
unsigned char Hoehe_Verstaerkung; // Wert : 0-50 |
unsigned char Hoehe_ACC_Wirkung; // Wert : 0-250 |
unsigned char Stick_P; // Wert : 1-6 |
unsigned char Stick_D; // Wert : 0-64 |
unsigned char Gier_P; // Wert : 1-20 |
unsigned char Gas_Min; // Wert : 0-32 |
unsigned char Gas_Max; // Wert : 33-250 |
unsigned char GyroAccFaktor; // Wert : 1-64 |
unsigned char KompassWirkung; // Wert : 0-32 |
unsigned char Gyro_P; // Wert : 10-250 |
unsigned char Gyro_I; // Wert : 0-250 |
unsigned char UnterspannungsWarnung; // Wert : 0-250 |
unsigned char NotGas; // Wert : 0-250 //Gaswert bei Empängsverlust |
unsigned char NotGasZeit; // Wert : 0-250 // Zeitbis auf NotGas geschaltet wird, wg. Rx-Problemen |
unsigned char UfoAusrichtung; // X oder + Formation |
unsigned char I_Faktor; // Wert : 0-250 |
unsigned char UserParam1; // Wert : 0-250 |
unsigned char UserParam2; // Wert : 0-250 |
unsigned char UserParam3; // Wert : 0-250 |
unsigned char UserParam4; // Wert : 0-250 |
unsigned char ServoNickControl; // Wert : 0-250 // Stellung des Servos |
unsigned char ServoNickComp; // Wert : 0-250 // Einfluss Gyro/Servo |
unsigned char ServoNickMin; // Wert : 0-250 // Anschlag |
unsigned char ServoNickMax; // Wert : 0-250 // Anschlag |
unsigned char ServoNickRefresh; // Wert : 0-250 // Richtung Einfluss Gyro/Servo |
unsigned char ServoNickCompInvert; // Wert : 0-250 // Richtung Einfluss Gyro/Servo |
unsigned char Reserved[7]; |
char Name[12]; |
}; |
extern struct mk_param_struct EE_Parameter; |
extern unsigned char Parameter_Luftdruck_D; |
extern unsigned char Parameter_MaxHoehe; |
extern unsigned char Parameter_Hoehe_P; |
extern unsigned char Parameter_Hoehe_ACC_Wirkung; |
extern unsigned char Parameter_KompassWirkung; |
extern unsigned char Parameter_Gyro_P; |
extern unsigned char Parameter_Gyro_I; |
extern unsigned char Parameter_Gier_P; |
extern unsigned char Parameter_ServoNickControl; |
#endif //_FC_H |
/branches/v0.60_MicroMag3_Nick666/flight.pnproj |
---|
0,0 → 1,0 |
<Project name="Flight-Ctrl"><File path="uart.h"></File><File path="main.c"></File><File path="main.h"></File><File path="makefile"></File><File path="uart.c"></File><File path="printf_P.h"></File><File path="printf_P.c"></File><File path="timer0.c"></File><File path="timer0.h"></File><File path="old_macros.h"></File><File path="twimaster.c"></File><File path="version.txt"></File><File path="twimaster.h"></File><File path="rc.c"></File><File path="rc.h"></File><File path="fc.h"></File><File path="fc.c"></File><File path="menu.h"></File><File path="menu.c"></File><File path="_Settings.h"></File><File path="analog.c"></File><File path="analog.h"></File><File path="GPS.c"></File><File path="gps.h"></File><File path="License.txt"></File><File path="math.c"></File><File path="math.h"></File><File path="compass.c"></File><File path="compass.h"></File></Project> |
/branches/v0.60_MicroMag3_Nick666/flight.pnps |
---|
0,0 → 1,0 |
<pd><ViewState><e p="Flight-Ctrl" x="true"></e></ViewState></pd> |
/branches/v0.60_MicroMag3_Nick666/gps.h |
---|
0,0 → 1,4 |
extern signed int GPS_Nick; |
extern signed int GPS_Roll; |
extern void GPS_Neutral(void); |
extern void GPS_BerechneZielrichtung(void); |
/branches/v0.60_MicroMag3_Nick666/license_buss.txt |
---|
0,0 → 1,52 |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Copyright (c) 04.2007 Holger Buss |
// + Nur für den privaten Gebrauch |
// + www.MikroKopter.com |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Es gilt für das gesamte Projekt (Hardware, Software, Binärfiles, Sourcecode und Dokumentation), |
// + dass eine Nutzung (auch auszugsweise) nur für den privaten und nichtkommerziellen Gebrauch zulässig ist. |
// + Sollten direkte oder indirekte kommerzielle Absichten verfolgt werden, ist mit uns (info@mikrokopter.de) Kontakt |
// + bzgl. der Nutzungsbedingungen aufzunehmen. |
// + Eine kommerzielle Nutzung ist z.B.Verkauf von MikroKoptern, Bestückung und Verkauf von Platinen oder Bausätzen, |
// + Verkauf von Luftbildaufnahmen, usw. |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Werden Teile des Quellcodes (mit oder ohne Modifikation) weiterverwendet oder veröffentlicht, |
// + unterliegen sie auch diesen Nutzungsbedingungen und diese Nutzungsbedingungen incl. Copyright müssen dann beiliegen |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Sollte die Software (auch auszugesweise) oder sonstige Informationen des MikroKopter-Projekts |
// + auf anderen Webseiten oder sonstigen Medien veröffentlicht werden, muss unsere Webseite "http://www.mikrokopter.de" |
// + eindeutig als Ursprung verlinkt und genannt werden |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Keine Gewähr auf Fehlerfreiheit, Vollständigkeit oder Funktion |
// + Benutzung auf eigene Gefahr |
// + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Die Portierung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur |
// + mit unserer Zustimmung zulässig |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Redistributions of source code (with or without modifications) must retain the above copyright notice, |
// + this list of conditions and the following disclaimer. |
// + * Neither the name of the copyright holders nor the names of contributors may be used to endorse or promote products derived |
// + from this software without specific prior written permission. |
// + * The use of this project (hardware, software, binary files, sources and documentation) is only permittet |
// + for non-profit use (directly or indirectly) |
// + Commercial use (for excample: selling of MikroKopters, selling of PCBs, assembly, ...) is only permitted |
// + with our written permission |
// + * If sources or documentations are redistributet, our webpage (http://www.MikroKopter.de) must be |
// + clearly linked and named as origin |
// + * porting to systems other than hardware from www.mikrokopter.de is not allowed |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
// + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
// + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
// + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
// + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
// + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
// + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
// + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
// + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
// + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
// + POSSIBILITY OF SUCH DAMAGE. |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
/branches/v0.60_MicroMag3_Nick666/main.c |
---|
0,0 → 1,213 |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Copyright (c) 04.2007 Holger Buss |
// + Nur für den privaten Gebrauch |
// + www.MikroKopter.com |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Es gilt für das gesamte Projekt (Hardware, Software, Binärfiles, Sourcecode und Dokumentation), |
// + dass eine Nutzung (auch auszugsweise) nur für den privaten und nicht-kommerziellen Gebrauch zulässig ist. |
// + Sollten direkte oder indirekte kommerzielle Absichten verfolgt werden, ist mit uns (info@mikrokopter.de) Kontakt |
// + bzgl. der Nutzungsbedingungen aufzunehmen. |
// + Eine kommerzielle Nutzung ist z.B.Verkauf von MikroKoptern, Bestückung und Verkauf von Platinen oder Bausätzen, |
// + Verkauf von Luftbildaufnahmen, usw. |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Werden Teile des Quellcodes (mit oder ohne Modifikation) weiterverwendet oder veröffentlicht, |
// + unterliegen sie auch diesen Nutzungsbedingungen und diese Nutzungsbedingungen incl. Copyright müssen dann beiliegen |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Sollte die Software (auch auszugesweise) oder sonstige Informationen des MikroKopter-Projekts |
// + auf anderen Webseiten oder Medien veröffentlicht werden, muss unsere Webseite "http://www.mikrokopter.de" |
// + eindeutig als Ursprung verlinkt und genannt werden |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Keine Gewähr auf Fehlerfreiheit, Vollständigkeit oder Funktion |
// + Benutzung auf eigene Gefahr |
// + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Die Portierung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur |
// + mit unserer Zustimmung zulässig |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Redistributions of source code (with or without modifications) must retain the above copyright notice, |
// + this list of conditions and the following disclaimer. |
// + * Neither the name of the copyright holders nor the names of contributors may be used to endorse or promote products derived |
// + from this software without specific prior written permission. |
// + * The use of this project (hardware, software, binary files, sources and documentation) is only permittet |
// + for non-commercial use (directly or indirectly) |
// + Commercial use (for excample: selling of MikroKopters, selling of PCBs, assembly, ...) is only permitted |
// + with our written permission |
// + * If sources or documentations are redistributet on other webpages, out webpage (http://www.MikroKopter.de) must be |
// + clearly linked as origin |
// + * porting to systems other than hardware from www.mikrokopter.de is not allowed |
// + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
// + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
// + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
// + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
// + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
// + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
// + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
// + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
// + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
// + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
// + POSSIBILITY OF SUCH DAMAGE. |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
#include "main.h" |
unsigned char EEPromArray[E2END+1] EEMEM; |
// -- Parametersatz aus EEPROM lesen --- |
// number [0..5] |
void ReadParameterSet(unsigned char number, unsigned char *buffer, unsigned char length) |
{ |
if (number > 5) number = 5; |
eeprom_read_block(buffer, &EEPromArray[EEPROM_ADR_PARAM_BEGIN + length * number], length); |
} |
// -- Parametersatz ins EEPROM schreiben --- |
// number [0..5] |
void WriteParameterSet(unsigned char number, unsigned char *buffer, unsigned char length) |
{ |
if (number > 5) number = 5; |
eeprom_write_block(buffer, &EEPromArray[EEPROM_ADR_PARAM_BEGIN + length * number], length); |
eeprom_write_byte(&EEPromArray[EEPROM_ADR_ACTIVE_SET], number); // diesen Parametersatz als aktuell merken |
} |
unsigned char GetActiveParamSetNumber(void) |
{ |
return(eeprom_read_byte(&EEPromArray[EEPROM_ADR_ACTIVE_SET])); |
} |
//############################################################################ |
//Hauptprogramm |
int main (void) |
//############################################################################ |
{ |
unsigned int timer; |
unsigned int timer2 = 0; |
DDRC = 0x01; // SCL |
PORTC = 0xff; // Pullup SDA |
DDRB = 0x1B; // LEDs und Druckoffset |
PORTB |= (1<<PB0); // LED_Rot |
DDRD = 0x3E; // Speaker & TXD & J3 J4 J5 |
DDRD |= (1<<PD7); // J7 |
PORTD = 0xF7; |
MCUSR &=~(1<<WDRF); |
WDTCSR |= (1<<WDCE)|(1<<WDE); |
WDTCSR = 0; |
beeptime = 2000; |
StickGier = 0; PPM_in[K_GAS] = 0;StickRoll = 0; StickNick = 0; |
ROT_OFF; |
Timer_Init(); |
UART_Init(); |
rc_sum_init(); |
ADC_Init(); |
i2c_init(); |
init_spi(); |
sei(); |
VersionInfo.Hauptversion = VERSION_HAUPTVERSION; |
VersionInfo.Nebenversion = VERSION_NEBENVERSION; |
VersionInfo.PCKompatibel = VERSION_KOMPATIBEL; |
printf("\n\rFlightControl V%d.%d ", VERSION_HAUPTVERSION, VERSION_NEBENVERSION); |
printf("\n\r=============================="); |
GRN_ON; |
if(eeprom_read_byte(&EEPromArray[EEPROM_ADR_VALID]) != 59) // seit V 0.60 |
{ |
printf("\n\rInit. EEPROM: Generiere Default-Parameter..."); |
DefaultKonstanten1(); |
for (unsigned char i=0;i<6;i++) |
{ |
if(i==2) DefaultKonstanten2(); |
WriteParameterSet(i, (unsigned char *) &EE_Parameter.Kanalbelegung[0], STRUCT_PARAM_LAENGE); |
} |
eeprom_write_byte(&EEPromArray[EEPROM_ADR_ACTIVE_SET], 1); |
eeprom_write_byte(&EEPromArray[EEPROM_ADR_VALID], 59); |
} |
ReadParameterSet(GetActiveParamSetNumber(), (unsigned char *) &EE_Parameter.Kanalbelegung[0], STRUCT_PARAM_LAENGE); |
printf("\n\rBenutze Parametersatz %d", GetActiveParamSetNumber()); |
if(EE_Parameter.GlobalConfig & CFG_HOEHENREGELUNG) |
{ |
printf("\n\rAbgleich Luftdrucksensor.."); |
timer = SetDelay(2500); |
SucheLuftruckOffset(); |
while (!CheckDelay(timer)); |
printf("OK\n\r"); |
} |
SetNeutral(); |
ROT_OFF; |
beeptime = 2000; |
DebugIn.Analog[1] = 1000; |
DebugIn.Digital[0] = 0x55; |
printf("\n\rSteuerung: "); |
if (EE_Parameter.GlobalConfig & CFG_HEADING_HOLD) printf("HeadingHold"); |
else printf("Neutral"); |
printf("\n\n\r"); |
LcdClear(); |
while (1) |
{ |
if (UpdateMotor) // ReglerIntervall |
{ |
UpdateMotor=0; |
MotorRegler(); |
SendMotorData(); |
ROT_OFF; |
if(PcZugriff) PcZugriff--; |
if(SenderOkay) SenderOkay--; |
if (UBat < EE_Parameter.UnterspannungsWarnung) |
{ |
beeptime = 2000; |
} |
if(!Timeout) |
{ |
i2c_init(); |
} |
else |
{ |
ROT_OFF; |
} |
} |
if(SIO_DEBUG) |
{ |
DatenUebertragung(); |
BearbeiteRxDaten(); |
} |
else BearbeiteRxDaten(); |
if(CheckDelay(timer2)) |
{ |
if(MotorenEin) PORTC ^= 0x10; else PORTC &= ~0x10; |
timer = SetDelay(500); |
} |
} |
return (1); |
} |
/branches/v0.60_MicroMag3_Nick666/main.h |
---|
0,0 → 1,94 |
#ifndef _MAIN_H |
#define _MAIN_H |
//Hier die Quarz Frequenz einstellen |
#if defined (__AVR_ATmega32__) |
#define SYSCLK 20000000L //Quarz Frequenz in Hz |
#endif |
#if defined (__AVR_ATmega644__) |
#define SYSCLK 20000000L //Quarz Frequenz in Hz |
//#define SYSCLK 16000000L //Quarz Frequenz in Hz |
#endif |
// neue Hardware |
#define ROT_OFF PORTB &=~(1<<PB0) |
#define ROT_ON PORTB |= (1<<PB0) |
#define ROT_FLASH PORTB ^= (1<<PB0) |
#define GRN_OFF PORTB &=~(1<<PB1) |
#define GRN_ON PORTB |= (1<<PB1) |
#define GRN_FLASH PORTD ^= (1<<PB1) |
//#ifndef F_CPU |
//#error ################## F_CPU nicht definiert oder ungültig ############# |
//#endif |
//+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
//#define ANZ_MITTELWERT 4 |
#define EEPROM_ADR_VALID 1 |
#define EEPROM_ADR_ACTIVE_SET 2 |
#define EEPROM_ADR_PARAM_BEGIN 100 |
#define CFG_HOEHENREGELUNG 0x01 |
#define CFG_HOEHEN_SCHALTER 0x02 |
#define CFG_HEADING_HOLD 0x04 |
#define CFG_KOMPASS_AKTIV 0x08 |
#define CFG_KOMPASS_FIX 0x10 |
#define CFG_GPS_AKTIV 0x20 |
//#define SYSCLK |
//extern unsigned long SYSCLK; |
extern volatile int i_Nick[20],i_Roll[20],DiffNick,DiffRoll; |
extern volatile unsigned char SenderOkay; |
extern unsigned char CosinusNickWinkel, CosinusRollWinkel; |
extern void ReadParameterSet (unsigned char number, unsigned char *buffer, unsigned char length); |
extern void WriteParameterSet(unsigned char number, unsigned char *buffer, unsigned char length); |
extern unsigned char GetActiveParamSetNumber(void); |
extern unsigned char EEPromArray[]; |
#include <stdlib.h> |
#include <string.h> |
#include <avr/io.h> |
#include <avr/pgmspace.h> |
#include <avr/interrupt.h> |
#include <avr/eeprom.h> |
#include <avr/boot.h> |
#include <avr/wdt.h> |
#include "old_macros.h" |
#include "_settings.h" |
#include "printf_P.h" |
#include "compass.h" |
#include "timer0.h" |
#include "uart.h" |
#include "analog.h" |
#include "twimaster.h" |
#include "menu.h" |
#include "rc.h" |
#include "fc.h" |
#include "gps.h" |
#include "math.h" |
#ifndef EEMEM |
#define EEMEM __attribute__ ((section (".eeprom"))) |
#endif |
#define DEBUG_DISPLAY_INTERVALL 123 // in ms |
#define DELAY_US(x) ((unsigned int)( (x) * 1e-6 * F_CPU )) |
#endif //_MAIN_H |
/branches/v0.60_MicroMag3_Nick666/makefile |
---|
0,0 → 1,392 |
#-------------------------------------------------------------------- |
# MCU name |
MCU = atmega644 |
F_CPU = 20000000 |
#------------------------------------------------------------------- |
HAUPT_VERSION = 0 |
NEBEN_VERSION = 60 |
VERSION_KOMPATIBEL = 4 # PC-Kompatibilität |
#------------------------------------------------------------------- |
ifeq ($(MCU), atmega32) |
# FUSE_SETTINGS= -u -U lfuse:w:0xff:m -U hfuse:w:0xcf:m |
HEX_NAME = MEGA32 |
endif |
ifeq ($(MCU), atmega644) |
FUSE_SETTINGS = -u -U lfuse:w:0xff:m -U hfuse:w:0xdf:m |
#FUSE_SETTINGS = -U lfuse:w:0xff:m -U hfuse:w:0xdf:m |
# -u bei neuen Controllern wieder einspielen |
HEX_NAME = MEGA644 |
endif |
ifeq ($(F_CPU), 16000000) |
QUARZ = 16MHZ |
endif |
ifeq ($(F_CPU), 20000000) |
QUARZ = 20MHZ |
endif |
# Output format. (can be srec, ihex, binary) |
FORMAT = ihex |
# Target file name (without extension). |
TARGET = Flight-Ctrl_$(HEX_NAME)_V$(HAUPT_VERSION)_$(NEBEN_VERSION) |
# Optimization level, can be [0, 1, 2, 3, s]. 0 turns off optimization. |
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) |
OPT = s |
########################################################################################################## |
# List C source files here. (C dependencies are automatically generated.) |
SRC = main.c uart.c printf_P.c timer0.c analog.c menu.c compass.c math.c |
SRC += twimaster.c rc.c fc.c GPS.c |
########################################################################################################## |
# List Assembler source files here. |
# Make them always end in a capital .S. Files ending in a lowercase .s |
# will not be considered source files but generated files (assembler |
# output from the compiler), and will be deleted upon "make clean"! |
# Even though the DOS/Win* filesystem matches both .s and .S the same, |
# it will preserve the spelling of the filenames, and gcc itself does |
# care about how the name is spelled on its command-line. |
ASRC = |
# List any extra directories to look for include files here. |
# Each directory must be seperated by a space. |
EXTRAINCDIRS = |
# Optional compiler flags. |
# -g: generate debugging information (for GDB, or for COFF conversion) |
# -O*: optimization level |
# -f...: tuning, see gcc manual and avr-libc documentation |
# -Wall...: warning level |
# -Wa,...: tell GCC to pass this to the assembler. |
# -ahlms: create assembler listing |
CFLAGS = -O$(OPT) \ |
-funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums \ |
-Wall -Wstrict-prototypes \ |
-mtiny-stack -mcall-prologues \ |
-Wa,-adhlns=$(<:.c=.lst) \ |
$(patsubst %,-I%,$(EXTRAINCDIRS)) |
# Set a "language standard" compiler flag. |
# Unremark just one line below to set the language standard to use. |
# gnu99 = C99 + GNU extensions. See GCC manual for more information. |
#CFLAGS += -std=c89 |
#CFLAGS += -std=gnu89 |
#CFLAGS += -std=c99 |
CFLAGS += -std=gnu99 |
CFLAGS += -DVERSION_HAUPTVERSION=$(HAUPT_VERSION) -DVERSION_NEBENVERSION=$(NEBEN_VERSION) -DVERSION_KOMPATIBEL=$(VERSION_KOMPATIBEL) |
# Optional assembler flags. |
# -Wa,...: tell GCC to pass this to the assembler. |
# -ahlms: create listing |
# -gstabs: have the assembler create line number information; note that |
# for use in COFF files, additional information about filenames |
# and function names needs to be present in the assembler source |
# files -- see avr-libc docs [FIXME: not yet described there] |
ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs |
# Optional linker flags. |
# -Wl,...: tell GCC to pass this to linker. |
# -Map: create map file |
# --cref: add cross reference to map file |
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref |
# Additional libraries |
# Minimalistic printf version |
#LDFLAGS += -Wl,-u,vfprintf -lprintf_min |
# Floating point printf version (requires -lm below) |
#LDFLAGS += -Wl,-u,vfprintf -lprintf_flt |
# -lm = math library |
LDFLAGS += -lm |
##LDFLAGS += -T./linkerfile/avr5.x |
# Programming support using avrdude. Settings and variables. |
# Programming hardware: alf avr910 avrisp bascom bsd |
# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500 |
# |
# Type: avrdude -c ? |
# to get a full listing. |
# |
#AVRDUDE_PROGRAMMER = stk200 |
AVRDUDE_PROGRAMMER = dt006 |
#AVRDUDE_PROGRAMMER = ponyser |
#falls Ponyser ausgewählt wird, muss sich unsere avrdude-Configdatei im Bin-Verzeichnis des Compilers befinden |
#AVRDUDE_PORT = com1 # programmer connected to serial device |
AVRDUDE_PORT = lpt1 # programmer connected to parallel port |
#AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex |
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex $(FUSE_SETTINGS) |
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep |
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) |
# Uncomment the following if you want avrdude's erase cycle counter. |
# Note that this counter needs to be initialized first using -Yn, |
# see avrdude manual. |
#AVRDUDE_ERASE += -y |
# Uncomment the following if you do /not/ wish a verification to be |
# performed after programming the device. |
AVRDUDE_FLAGS += -V |
# Increase verbosity level. Please use this when submitting bug |
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> |
# to submit bug reports. |
#AVRDUDE_FLAGS += -v -v |
# --------------------------------------------------------------------------- |
# Define directories, if needed. |
DIRAVR = c:/winavr |
DIRAVRBIN = $(DIRAVR)/bin |
DIRAVRUTILS = $(DIRAVR)/utils/bin |
DIRINC = . |
DIRLIB = $(DIRAVR)/avr/lib |
# Define programs and commands. |
SHELL = sh |
CC = avr-gcc |
OBJCOPY = avr-objcopy |
OBJDUMP = avr-objdump |
SIZE = avr-size |
# Programming support using avrdude. |
AVRDUDE = avrdude |
REMOVE = rm -f |
COPY = cp |
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex |
ELFSIZE = $(SIZE) -A $(TARGET).elf |
# Define Messages |
# English |
MSG_ERRORS_NONE = Errors: none |
MSG_BEGIN = -------- begin -------- |
MSG_END = -------- end -------- |
MSG_SIZE_BEFORE = Size before: |
MSG_SIZE_AFTER = Size after: |
MSG_COFF = Converting to AVR COFF: |
MSG_EXTENDED_COFF = Converting to AVR Extended COFF: |
MSG_FLASH = Creating load file for Flash: |
MSG_EEPROM = Creating load file for EEPROM: |
MSG_EXTENDED_LISTING = Creating Extended Listing: |
MSG_SYMBOL_TABLE = Creating Symbol Table: |
MSG_LINKING = Linking: |
MSG_COMPILING = Compiling: |
MSG_ASSEMBLING = Assembling: |
MSG_CLEANING = Cleaning project: |
# Define all object files. |
OBJ = $(SRC:.c=.o) $(ASRC:.S=.o) |
# Define all listing files. |
LST = $(ASRC:.S=.lst) $(SRC:.c=.lst) |
# Combine all necessary flags and optional flags. |
# Add target processor to flags. |
#ALL_CFLAGS = -mmcu=$(MCU) -DF_CPU=$(F_CPU) -I. $(CFLAGS) |
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) |
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) |
# Default target. |
all: begin gccversion sizebefore $(TARGET).elf $(TARGET).hex $(TARGET).eep \ |
$(TARGET).lss $(TARGET).sym sizeafter finished end |
# Eye candy. |
# AVR Studio 3.x does not check make's exit code but relies on |
# the following magic strings to be generated by the compile job. |
begin: |
@echo |
@echo $(MSG_BEGIN) |
finished: |
@echo $(MSG_ERRORS_NONE) |
end: |
@echo $(MSG_END) |
@echo |
# Display size of file. |
sizebefore: |
@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); echo; fi |
sizeafter: |
@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi |
# Display compiler version information. |
gccversion : |
@$(CC) --version |
# Convert ELF to COFF for use in debugging / simulating in |
# AVR Studio or VMLAB. |
COFFCONVERT=$(OBJCOPY) --debugging \ |
--change-section-address .data-0x800000 \ |
--change-section-address .bss-0x800000 \ |
--change-section-address .noinit-0x800000 \ |
--change-section-address .eeprom-0x810000 |
coff: $(TARGET).elf |
@echo |
@echo $(MSG_COFF) $(TARGET).cof |
$(COFFCONVERT) -O coff-avr $< $(TARGET).cof |
extcoff: $(TARGET).elf |
@echo |
@echo $(MSG_EXTENDED_COFF) $(TARGET).cof |
$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof |
# Program the device. |
program: $(TARGET).hex $(TARGET).eep |
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) |
# Create final output files (.hex, .eep) from ELF output file. |
%.hex: %.elf |
@echo |
@echo $(MSG_FLASH) $@ |
$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@ |
%.eep: %.elf |
@echo |
@echo $(MSG_EEPROM) $@ |
-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ |
--change-section-lma .eeprom=0 -O $(FORMAT) $< $@ |
# Create extended listing file from ELF output file. |
%.lss: %.elf |
@echo |
@echo $(MSG_EXTENDED_LISTING) $@ |
$(OBJDUMP) -h -S $< > $@ |
# Create a symbol table from ELF output file. |
%.sym: %.elf |
@echo |
@echo $(MSG_SYMBOL_TABLE) $@ |
avr-nm -n $< > $@ |
# Link: create ELF output file from object files. |
.SECONDARY : $(TARGET).elf |
.PRECIOUS : $(OBJ) |
%.elf: $(OBJ) |
@echo |
@echo $(MSG_LINKING) $@ |
$(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS) |
# Compile: create object files from C source files. |
%.o : %.c |
@echo |
@echo $(MSG_COMPILING) $< |
$(CC) -c $(ALL_CFLAGS) $< -o $@ |
# Compile: create assembler files from C source files. |
%.s : %.c |
$(CC) -S $(ALL_CFLAGS) $< -o $@ |
# Assemble: create object files from assembler source files. |
%.o : %.S |
@echo |
@echo $(MSG_ASSEMBLING) $< |
$(CC) -c $(ALL_ASFLAGS) $< -o $@ |
# Target: clean project. |
clean: begin clean_list finished end |
clean_list : |
@echo |
@echo $(MSG_CLEANING) |
# $(REMOVE) $(TARGET).hex |
$(REMOVE) $(TARGET).eep |
$(REMOVE) $(TARGET).obj |
$(REMOVE) $(TARGET).cof |
$(REMOVE) $(TARGET).elf |
$(REMOVE) $(TARGET).map |
$(REMOVE) $(TARGET).obj |
$(REMOVE) $(TARGET).a90 |
$(REMOVE) $(TARGET).sym |
$(REMOVE) $(TARGET).lnk |
$(REMOVE) $(TARGET).lss |
$(REMOVE) $(OBJ) |
$(REMOVE) $(LST) |
$(REMOVE) $(SRC:.c=.s) |
$(REMOVE) $(SRC:.c=.d) |
# Automatically generate C source code dependencies. |
# (Code originally taken from the GNU make user manual and modified |
# (See README.txt Credits).) |
# |
# Note that this will work with sh (bash) and sed that is shipped with WinAVR |
# (see the SHELL variable defined above). |
# This may not work with other shells or other seds. |
# |
%.d: %.c |
set -e; $(CC) -MM $(ALL_CFLAGS) $< \ |
| sed 's,\(.*\)\.o[ :]*,\1.o \1.d : ,g' > $@; \ |
[ -s $@ ] || rm -f $@ |
# Remove the '-' if you want to see the dependency files generated. |
-include $(SRC:.c=.d) |
# Listing of phony targets. |
.PHONY : all begin finish end sizebefore sizeafter gccversion coff extcoff \ |
clean clean_list program |
/branches/v0.60_MicroMag3_Nick666/math.c |
---|
0,0 → 1,118 |
/* |
Copyright 2007, Niklas Nold |
This program (files math.c and math.h) is free software; you can redistribute it and/or modify |
it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; |
either version 3 of the License, or (at your option) any later version. |
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; |
without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License |
along with this program. If not, see <http://www.gnu.org/licenses/>. |
Please note: All the other files for the project "Mikrokopter" by H. Buss are under the license (license_buss.txt) published by www.mikrokopter.de |
*/ |
#include "main.h" |
const uint8_t pgm_atan[270] PROGMEM = {0,1,2,3,5,6,7,8,9,10,11,12,13,15,16,17,18,19,20,21,22,23,24,25,26,27,27,28,29,30,31,32,33,33,34,35,36,37,37,38,39,39,40,41,41,42,43,43,44,44,45,46,46,47,47,48,48,49,49,50,50,51,51,52,52,52,53,53,54,54,54,55,55,56,56,56,57,57,57,58,58,58,59,59,59,60,60,60,60,61,61,61,61,62,62,62,62,63,63,63,63,64,64,64,64,65,65,65,65,65,66,66,66,66,66,67,67,67,67,67,67,68,68,68,68,68,68,69,69,69,69,69,69,69,70,70,70,70,70,70,70,70,71,71,71,71,71,71,71,71,72,72,72,72,72,72,72,72,72,73,73,73,73,73,73,73,73,73,73,74,74,74,74,74,74,74,74,74,74,74,74,75,75,75,75,75,75,75,75,75,75,75,75,75,76,76,76,76,76,76,76,76,76,76,76,76,76,76,76,77,77,77,77,77,77,77,77,77,77,77,77,77,77,77,77,77,78,78,78,78,78,78,78,78,78,78,78,78,78,78,78,78,78,78,78,78,79,79,79,79,79,79,79,79,79,79,79,79,79,79,79,79,79,79,79,79,79,79,79,79}; |
// Arkustangens2 im Gradmaß |
signed int atan2_i(signed int x, signed int y) |
{ |
int i,angle; |
int8_t m; |
if (!x && !y) return 0; //atan2 = 0 für x und y = 0 |
if (y < 0) m=-1; |
else m=1; |
if (x==0) return (90*m); // atan2 = 90° für x = 0 |
i = abs(((float)y / x) * 50); // Berechne i für die Lookup table (Schrittweite atan(x) ist 0.02 -> *50) |
if (i<270) angle = pgm_read_byte(&pgm_atan[i]); // Lookup für 1° bis 79° |
else if (i>5750) angle = 90; // Grenzwert ist 90° |
else if (i>=1910) angle = 89; // 89° bis 80° über Wertebereiche |
else if (i>=1150) angle = 88; |
else if (i>=820) angle = 87; |
else if (i>=640) angle = 86; |
else if (i>=520) angle = 85; |
else if (i>=440) angle = 84; |
else if (i>=380) angle = 83; |
else if (i>=335) angle = 82; |
else if (i>=299) angle = 81; |
else angle = 80; // (i>=270) |
if (x > 0) return (angle*m); // Quadrant I und IV |
else if ((x < 0) && (y >= 0)) return ((angle*-1) + 180); // Quadrant II |
else return (angle - 180); // x < 0 && y < 0 Quadrant III |
} |
const float pgm_sinus_f [91] PROGMEM = {0.000,0.017,0.035,0.052,0.070,0.087,0.105,0.122,0.139,0.156,0.174,0.191,0.208,0.225,0.242,0.259,0.276,0.292,0.309,0.326,0.342,0.358,0.375,0.391,0.407,0.423,0.438,0.454,0.469,0.485,0.500,0.515,0.530,0.545,0.559,0.574,0.588,0.602,0.616,0.629,0.643,0.656,0.669,0.682,0.695,0.707,0.719,0.731,0.743,0.755,0.766,0.777,0.788,0.799,0.809,0.819,0.829,0.839,0.848,0.857,0.866,0.875,0.883,0.891,0.899,0.906,0.914,0.921,0.927,0.934,0.940,0.946,0.951,0.956,0.961,0.966,0.970,0.974,0.978,0.982,0.985,0.988,0.990,0.993,0.995,0.996,0.998,0.999,0.999,1.000,1.000}; |
inline float pgm_read_float(const float *addr) |
{ |
union |
{ |
uint16_t i[2]; // 2 16-bit-Worte |
float f; |
} u; |
u.i[0]=pgm_read_word((PGM_P)addr); |
u.i[1]=pgm_read_word((PGM_P)addr+2); |
return u.f; |
} |
// Kosinusfunktion im Gradmaß |
float cos_f(signed int winkel) |
{ |
return (sin_f(90-winkel)); |
} |
// Sinusfunktion im Gradmaß |
float sin_f(signed int winkel) |
{ |
short int m,n; |
float sinus; |
//winkel = winkel % 360; |
if (winkel < 0) |
{ |
m = -1; |
winkel = abs(winkel); |
} |
else m = +1; |
// Quadranten auswerten |
if ((winkel > 90 ) && (winkel <= 180)) {winkel = 180 - winkel; n = 1;} |
else if ((winkel > 180 ) && (winkel <= 270)) {winkel = winkel - 180; n = -1;} |
else if ((winkel > 270) && (winkel <= 360)) {winkel = 360 - winkel; n = -1;} |
else n = 1; //0 - 90 Grad |
sinus = pgm_read_float(&pgm_sinus_f[winkel]); |
return (sinus*m*n); |
} |
const uint8_t pgm_asin[201] PROGMEM = {0,0,1,1,1,1,2,2,2,3,3,3,3,4,4,4,5,5,5,5,6,6,6,7,7,7,7,8,8,8,9,9,9,9,10,10,10,11,11,11,12,12,12,12,13,13,13,14,14,14,14,15,15,15,16,16,16,17,17,17,17,18,18,18,19,19,19,20,20,20,20,21,21,21,22,22,22,23,23,23,24,24,24,25,25,25,25,26,26,26,27,27,27,28,28,28,29,29,29,30,30,30,31,31,31,32,32,32,33,33,33,34,34,34,35,35,35,36,36,37,37,37,38,38,38,39,39,39,40,40,41,41,41,42,42,42,43,43,44,44,44,45,45,46,46,46,47,47,48,48,49,49,49,50,50,51,51,52,52,53,53,54,54,55,55,56,56,57,57,58,58,59,59,60,60,61,62,62,63,64,64,65,66,66,67,68,68,69,70,71,72,73,74,75,76,77,79,80,82,84,90}; |
// Akurssinusfunktion im Gradmaß |
int8_t asin_i(signed int i) |
{ |
signed char m; |
if (i < 0) {m=-1;i=abs(i);} |
else m=1; |
return (pgm_read_byte(&pgm_asin[i]) * m); |
} |
/branches/v0.60_MicroMag3_Nick666/math.h |
---|
0,0 → 1,11 |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Peter Muehlenbrock |
// Definitionen fuer Modul math |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
#include "main.h" |
extern signed int atan2_i(signed int x, signed int y); |
extern float cos_f(signed int winkel); |
extern float sin_f(signed int winkel); |
extern int8_t asin_i(signed int i); |
/branches/v0.60_MicroMag3_Nick666/menu.c |
---|
0,0 → 1,118 |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Copyright (c) 04.2007 Holger Buss |
// + only for non-profit use |
// + www.MikroKopter.com |
// + see the File "License.txt" for further Informations |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
#include "main.h" |
unsigned int TestInt = 0; |
#define ARRAYGROESSE 10 |
unsigned char Array[ARRAYGROESSE] = {1,2,3,4,5,6,7,8,9,10}; |
char DisplayBuff[80] = "Hallo Welt"; |
unsigned char DispPtr = 0; |
unsigned char RemoteTasten = 0; |
#define KEY1 0x01 |
#define KEY2 0x02 |
#define KEY3 0x04 |
#define KEY4 0x08 |
#define KEY5 0x10 |
void LcdClear(void) |
{ |
unsigned char i; |
for(i=0;i<80;i++) DisplayBuff[i] = ' '; |
} |
void Menu(void) |
{ |
static unsigned char MaxMenue = 10,MenuePunkt=0; |
if(RemoteTasten & KEY1) { if(MenuePunkt) MenuePunkt--; else MenuePunkt = MaxMenue; LcdClear(); } |
if(RemoteTasten & KEY2) { MenuePunkt++; LcdClear(); } |
if((RemoteTasten & KEY1) && (RemoteTasten & KEY2)) MenuePunkt = 0; |
LCD_printfxy(17,0,"[%i]",MenuePunkt); |
switch(MenuePunkt) |
{ |
case 0: |
LCD_printfxy(0,0,"++ MikroKopter ++"); |
LCD_printfxy(0,1,"V%d.%d",VERSION_HAUPTVERSION, VERSION_NEBENVERSION); |
LCD_printfxy(0,2,"Setting: %d ",GetActiveParamSetNumber()); |
LCD_printfxy(0,3,"(c) Holger Buss"); |
// if(RemoteTasten & KEY3) TestInt--; |
// if(RemoteTasten & KEY4) TestInt++; |
break; |
case 1: |
if(EE_Parameter.GlobalConfig & CFG_HOEHENREGELUNG) |
{ |
LCD_printfxy(0,0,"Hoehe: %5i",HoehenWert); |
LCD_printfxy(0,1,"SollHoehe: %5i",SollHoehe); |
LCD_printfxy(0,2,"Luftdruck: %5i",MessLuftdruck); |
LCD_printfxy(0,3,"Off : %5i",DruckOffsetSetting); |
} |
else |
{ |
LCD_printfxy(0,1,"Keine "); |
LCD_printfxy(0,2,"Höhenregelung"); |
} |
break; |
case 2: |
LCD_printfxy(0,0,"akt. Lage"); |
LCD_printfxy(0,1,"Nick: %5i",IntegralNick/1024); |
LCD_printfxy(0,2,"Roll: %5i",IntegralRoll/1024); |
LCD_printfxy(0,3,"Kompass: %5i",KompassValue); |
break; |
case 3: |
LCD_printfxy(0,0,"K1:%4i K2:%4i ",PPM_in[1],PPM_in[2]); |
LCD_printfxy(0,1,"K3:%4i K4:%4i ",PPM_in[3],PPM_in[4]); |
LCD_printfxy(0,2,"K5:%4i K6:%4i ",PPM_in[5],PPM_in[6]); |
LCD_printfxy(0,3,"K7:%4i Kanäle ",PPM_in[7]); |
break; |
case 4: |
LCD_printfxy(0,0,"Ni:%4i Ro:%4i ",PPM_in[EE_Parameter.Kanalbelegung[K_NICK]],PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]]); |
LCD_printfxy(0,1,"Gs:%4i Gi:%4i ",PPM_in[EE_Parameter.Kanalbelegung[K_GAS]],PPM_in[EE_Parameter.Kanalbelegung[K_GIER]]); |
LCD_printfxy(0,2,"P1:%4i P2:%4i ",PPM_in[EE_Parameter.Kanalbelegung[K_POTI1]],PPM_in[EE_Parameter.Kanalbelegung[K_POTI2]]); |
LCD_printfxy(0,3,"P3:%4i Kanäle ",PPM_in[EE_Parameter.Kanalbelegung[K_POTI3]]); |
break; |
case 5: |
LCD_printfxy(0,0,"Gyro - Sensor"); |
LCD_printfxy(0,1,"Nick %4i (%3i)",AccumulateNick / MessanzahlNick, AdNeutralNick); |
LCD_printfxy(0,2,"Roll %4i (%3i)",AccumulateRoll / MessanzahlRoll, AdNeutralRoll); |
LCD_printfxy(0,3,"Gier %4i (%3i)",AccumulateGier / MessanzahlGier, AdNeutralGier); |
break; |
case 6: |
LCD_printfxy(0,0,"ACC - Sensor"); |
LCD_printfxy(0,1,"Nick %4i (%3i)",accumulate_AccNick / messanzahl_AccNick,NeutralAccX); |
LCD_printfxy(0,2,"Roll %4i (%3i)",accumulate_AccRoll / messanzahl_AccRoll,NeutralAccY); |
LCD_printfxy(0,3,"Hoch %4i (%3i)",Aktuell_az/*accumulate_AccHoch / messanzahl_AccHoch*/,(int)NeutralAccZ); |
break; |
case 7: |
LCD_printfxy(0,1,"Spannung: %5i",UBat); |
LCD_printfxy(0,2,"Empf.Pegel:%5i",SenderOkay); |
break; |
case 8: |
LCD_printfxy(0,0,"Kompass "); |
LCD_printfxy(0,1,"Richtung: %5i",KompassRichtung); |
LCD_printfxy(0,2,"Messwert: %5i",KompassValue); |
LCD_printfxy(0,3,"Start: %5i",KompassStartwert); |
break; |
case 9: |
LCD_printfxy(0,0,"Poti1: %3i",Poti1); |
LCD_printfxy(0,1,"Poti2: %3i",Poti2); |
LCD_printfxy(0,2,"Poti3: %3i",Poti3); |
LCD_printfxy(0,3,"Poti4: %3i",Poti4); |
break; |
case 10: |
LCD_printfxy(0,0,"Servo " ); |
LCD_printfxy(0,1,"Setpoint %3i",Parameter_ServoNickControl); |
LCD_printfxy(0,2,"Stellung: %3i",ServoValue); |
LCD_printfxy(0,3,"Range:%3i-%3i",EE_Parameter.ServoNickMin,EE_Parameter.ServoNickMax); |
break; |
default: MaxMenue = MenuePunkt - 1; |
MenuePunkt = 0; |
break; |
} |
RemoteTasten = 0; |
} |
/branches/v0.60_MicroMag3_Nick666/menu.h |
---|
0,0 → 1,7 |
void LcdClear(void); |
extern void Menu(void); |
extern char DisplayBuff[80]; |
extern unsigned char DispPtr; |
unsigned char RemoteTasten; |
/branches/v0.60_MicroMag3_Nick666/old_macros.h |
---|
0,0 → 1,47 |
/* |
For backwards compatibility only. |
Ingo Busker ingo@mikrocontroller.com |
*/ |
#ifndef cbi |
#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit)) |
#endif |
#ifndef sbi |
#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit)) |
#endif |
#ifndef inb |
#define inb(sfr) _SFR_BYTE(sfr) |
#endif |
#ifndef outb |
#define outb(sfr, val) (_SFR_BYTE(sfr) = (val)) |
#endif |
#ifndef inw |
#define inw(sfr) _SFR_WORD(sfr) |
#endif |
#ifndef outw |
#define outw(sfr, val) (_SFR_WORD(sfr) = (val)) |
#endif |
#ifndef outp |
#define outp(val, sfr) outb(sfr, val) |
#endif |
#ifndef inp |
#define inp(sfr) inb(sfr) |
#endif |
#ifndef BV |
#define BV(bit) _BV(bit) |
#endif |
#ifndef PRG_RDB |
#define PRG_RDB pgm_read_byte |
#endif |
/branches/v0.60_MicroMag3_Nick666/printf_P.c |
---|
0,0 → 1,480 |
// Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist nicht von der Lizenz für den MikroKopter-Teil unterstellt |
/* |
Copyright (C) 1993 Free Software Foundation |
This file is part of the GNU IO Library. This library is free |
software; you can redistribute it and/or modify it under the |
terms of the GNU General Public License as published by the |
Free Software Foundation; either version 2, or (at your option) |
any later version. |
This library is distributed in the hope that it will be useful, |
but WITHOUT ANY WARRANTY; without even the implied warranty of |
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
GNU General Public License for more details. |
You should have received a copy of the GNU General Public License |
along with this library; see the file COPYING. If not, write to the Free |
Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
As a special exception, if you link this library with files |
compiled with a GNU compiler to produce an executable, this does not cause |
the resulting executable to be covered by the GNU General Public License. |
This exception does not however invalidate any other reasons why |
the executable file might be covered by the GNU General Public License. */ |
/* |
* Copyright (c) 1990 Regents of the University of California. |
* All rights reserved. |
* |
* Redistribution and use in source and binary forms, with or without |
* modification, are permitted provided that the following conditions |
* are met: |
* 1. Redistributions of source code must retain the above copyright |
* notice, this list of conditions and the following disclaimer. |
* 2. Redistributions in binary form must reproduce the above copyright |
* notice, this list of conditions and the following disclaimer in the |
* documentation and/or other materials provided with the distribution. |
* 3. [rescinded 22 July 1999] |
* 4. Neither the name of the University nor the names of its contributors |
* may be used to endorse or promote products derived from this software |
* without specific prior written permission. |
* |
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND |
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE |
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
* SUCH DAMAGE. |
*/ |
/****************************************************************************** |
This file is a patched version of printf called _printf_P |
It is made to work with avr-gcc for Atmel AVR MCUs. |
There are some differences from standard printf: |
1. There is no floating point support (with fp the code is about 8K!) |
2. Return type is void |
3. Format string must be in program memory (by using macro printf this is |
done automaticaly) |
4. %n is not implemented (just remove the comment around it if you need it) |
5. If LIGHTPRINTF is defined, the code is about 550 bytes smaller and the |
folowing specifiers are disabled : |
space # * . - + p s o O |
6. A function void uart_sendchar(char c) is used for output. The UART must |
be initialized before using printf. |
Alexander Popov |
sasho@vip.orbitel.bg |
******************************************************************************/ |
/* |
* Actual printf innards. |
* |
* This code is large and complicated... |
*/ |
#include <string.h> |
#ifdef __STDC__ |
#include <stdarg.h> |
#else |
#include <varargs.h> |
#endif |
#include "main.h" |
//#define LIGHTPRINTF |
char PrintZiel; |
char Putchar(char zeichen) |
{ |
if(PrintZiel == OUT_LCD) { DisplayBuff[DispPtr++] = zeichen; return(1);} |
else return(uart_putchar(zeichen)); |
} |
void PRINT(const char * ptr, unsigned int len) |
{ |
for(;len;len--) Putchar(*ptr++); |
} |
void PRINTP(const char * ptr, unsigned int len) |
{ |
for(;len;len--) Putchar(pgm_read_byte(ptr++)); |
} |
void PAD_SP(signed char howmany) |
{ |
for(;howmany>0;howmany--) Putchar(' '); |
} |
void PAD_0(signed char howmany) |
{ |
for(;howmany>0;howmany--) Putchar('0'); |
} |
#define BUF 40 |
/* |
* Macros for converting digits to letters and vice versa |
*/ |
#define to_digit(c) ((c) - '0') |
#define is_digit(c) ((c)<='9' && (c)>='0') |
#define to_char(n) ((n) + '0') |
/* |
* Flags used during conversion. |
*/ |
#define LONGINT 0x01 /* long integer */ |
#define LONGDBL 0x02 /* long double; unimplemented */ |
#define SHORTINT 0x04 /* short integer */ |
#define ALT 0x08 /* alternate form */ |
#define LADJUST 0x10 /* left adjustment */ |
#define ZEROPAD 0x20 /* zero (as opposed to blank) pad */ |
#define HEXPREFIX 0x40 /* add 0x or 0X prefix */ |
void _printf_P (char ziel,char const *fmt0, ...) /* Works with string from FLASH */ |
{ |
va_list ap; |
register const char *fmt; /* format string */ |
register char ch; /* character from fmt */ |
register int n; /* handy integer (short term usage) */ |
register char *cp; /* handy char pointer (short term usage) */ |
const char *fmark; /* for remembering a place in fmt */ |
register unsigned char flags; /* flags as above */ |
signed char width; /* width from format (%8d), or 0 */ |
signed char prec; /* precision from format (%.3d), or -1 */ |
char sign; /* sign prefix (' ', '+', '-', or \0) */ |
unsigned long _ulong=0; /* integer arguments %[diouxX] */ |
#define OCT 8 |
#define DEC 10 |
#define HEX 16 |
unsigned char base; /* base for [diouxX] conversion */ |
signed char dprec; /* a copy of prec if [diouxX], 0 otherwise */ |
signed char dpad; /* extra 0 padding needed for integers */ |
signed char fieldsz; /* field size expanded by sign, dpad etc */ |
/* The initialization of 'size' is to suppress a warning that |
'size' might be used unitialized. It seems gcc can't |
quite grok this spaghetti code ... */ |
signed char size = 0; /* size of converted field or string */ |
char buf[BUF]; /* space for %c, %[diouxX], %[eEfgG] */ |
char ox[2]; /* space for 0x hex-prefix */ |
PrintZiel = ziel; // bestimmt, LCD oder UART |
va_start(ap, fmt0); |
fmt = fmt0; |
/* |
* Scan the format for conversions (`%' character). |
*/ |
for (;;) { |
for (fmark = fmt; (ch = pgm_read_byte(fmt)) != '\0' && ch != '%'; fmt++) |
/* void */; |
if ((n = fmt - fmark) != 0) { |
PRINTP(fmark, n); |
} |
if (ch == '\0') |
goto done; |
fmt++; /* skip over '%' */ |
flags = 0; |
dprec = 0; |
width = 0; |
prec = -1; |
sign = '\0'; |
rflag: ch = PRG_RDB(fmt++); |
reswitch: |
#ifdef LIGHTPRINTF |
if (ch=='o' || ch=='u' || (ch|0x20)=='x') { |
#else |
if (ch=='u' || (ch|0x20)=='x') { |
#endif |
if (flags&LONGINT) { |
_ulong=va_arg(ap, unsigned long); |
} else { |
register unsigned int _d; |
_d=va_arg(ap, unsigned int); |
_ulong = flags&SHORTINT ? (unsigned long)(unsigned short)_d : (unsigned long)_d; |
} |
} |
#ifndef LIGHTPRINTF |
if(ch==' ') { |
/* |
* ``If the space and + flags both appear, the space |
* flag will be ignored.'' |
* -- ANSI X3J11 |
*/ |
if (!sign) |
sign = ' '; |
goto rflag; |
} else if (ch=='#') { |
flags |= ALT; |
goto rflag; |
} else if (ch=='*'||ch=='-') { |
if (ch=='*') { |
/* |
* ``A negative field width argument is taken as a |
* - flag followed by a positive field width.'' |
* -- ANSI X3J11 |
* They don't exclude field widths read from args. |
*/ |
if ((width = va_arg(ap, int)) >= 0) |
goto rflag; |
width = -width; |
} |
flags |= LADJUST; |
flags &= ~ZEROPAD; /* '-' disables '0' */ |
goto rflag; |
} else if (ch=='+') { |
sign = '+'; |
goto rflag; |
} else if (ch=='.') { |
if ((ch = PRG_RDB(fmt++)) == '*') { |
n = va_arg(ap, int); |
prec = n < 0 ? -1 : n; |
goto rflag; |
} |
n = 0; |
while (is_digit(ch)) { |
n = n*10 + to_digit(ch); |
ch = PRG_RDB(fmt++); |
} |
prec = n < 0 ? -1 : n; |
goto reswitch; |
} else |
#endif /* LIGHTPRINTF */ |
if (ch=='0') { |
/* |
* ``Note that 0 is taken as a flag, not as the |
* beginning of a field width.'' |
* -- ANSI X3J11 |
*/ |
if (!(flags & LADJUST)) |
flags |= ZEROPAD; /* '-' disables '0' */ |
goto rflag; |
} else if (ch>='1' && ch<='9') { |
n = 0; |
do { |
n = 10 * n + to_digit(ch); |
ch = PRG_RDB(fmt++); |
} while (is_digit(ch)); |
width = n; |
goto reswitch; |
} else if (ch=='h') { |
flags |= SHORTINT; |
goto rflag; |
} else if (ch=='l') { |
flags |= LONGINT; |
goto rflag; |
} else if (ch=='c') { |
*(cp = buf) = va_arg(ap, int); |
size = 1; |
sign = '\0'; |
} else if (ch=='D'||ch=='d'||ch=='i') { |
if(ch=='D') |
flags |= LONGINT; |
if (flags&LONGINT) { |
_ulong=va_arg(ap, long); |
} else { |
register int _d; |
_d=va_arg(ap, int); |
_ulong = flags&SHORTINT ? (long)(short)_d : (long)_d; |
} |
if ((long)_ulong < 0) { |
_ulong = -_ulong; |
sign = '-'; |
} |
base = DEC; |
goto number; |
} else |
/* |
if (ch=='n') { |
if (flags & LONGINT) |
*va_arg(ap, long *) = ret; |
else if (flags & SHORTINT) |
*va_arg(ap, short *) = ret; |
else |
*va_arg(ap, int *) = ret; |
continue; // no output |
} else |
*/ |
#ifndef LIGHTPRINTF |
if (ch=='O'||ch=='o') { |
if (ch=='O') |
flags |= LONGINT; |
base = OCT; |
goto nosign; |
} else if (ch=='p') { |
/* |
* ``The argument shall be a pointer to void. The |
* value of the pointer is converted to a sequence |
* of printable characters, in an implementation- |
* defined manner.'' |
* -- ANSI X3J11 |
*/ |
/* NOSTRICT */ |
_ulong = (unsigned int)va_arg(ap, void *); |
base = HEX; |
flags |= HEXPREFIX; |
ch = 'x'; |
goto nosign; |
} else if (ch=='s') { // print a string from RAM |
if ((cp = va_arg(ap, char *)) == NULL) { |
cp=buf; |
cp[0] = '('; |
cp[1] = 'n'; |
cp[2] = 'u'; |
cp[4] = cp[3] = 'l'; |
cp[5] = ')'; |
cp[6] = '\0'; |
} |
if (prec >= 0) { |
/* |
* can't use strlen; can only look for the |
* NUL in the first `prec' characters, and |
* strlen() will go further. |
*/ |
char *p = (char*)memchr(cp, 0, prec); |
if (p != NULL) { |
size = p - cp; |
if (size > prec) |
size = prec; |
} else |
size = prec; |
} else |
size = strlen(cp); |
sign = '\0'; |
} else |
#endif /* LIGHTPRINTF */ |
if(ch=='U'||ch=='u') { |
if (ch=='U') |
flags |= LONGINT; |
base = DEC; |
goto nosign; |
} else if (ch=='X'||ch=='x') { |
base = HEX; |
/* leading 0x/X only if non-zero */ |
if (flags & ALT && _ulong != 0) |
flags |= HEXPREFIX; |
/* unsigned conversions */ |
nosign: sign = '\0'; |
/* |
* ``... diouXx conversions ... if a precision is |
* specified, the 0 flag will be ignored.'' |
* -- ANSI X3J11 |
*/ |
number: if ((dprec = prec) >= 0) |
flags &= ~ZEROPAD; |
/* |
* ``The result of converting a zero value with an |
* explicit precision of zero is no characters.'' |
* -- ANSI X3J11 |
*/ |
cp = buf + BUF; |
if (_ulong != 0 || prec != 0) { |
register unsigned char _d,notlastdigit; |
do { |
notlastdigit=(_ulong>=base); |
_d = _ulong % base; |
if (_d<10) { |
_d+='0'; |
} else { |
_d+='a'-10; |
if (ch=='X') _d&=~0x20; |
} |
*--cp=_d; |
_ulong /= base; |
} while (notlastdigit); |
#ifndef LIGHTPRINTF |
// handle octal leading 0 |
if (base==OCT && flags & ALT && *cp != '0') |
*--cp = '0'; |
#endif |
} |
size = buf + BUF - cp; |
} else { //default |
/* "%?" prints ?, unless ? is NUL */ |
if (ch == '\0') |
goto done; |
/* pretend it was %c with argument ch */ |
cp = buf; |
*cp = ch; |
size = 1; |
sign = '\0'; |
} |
/* |
* All reasonable formats wind up here. At this point, |
* `cp' points to a string which (if not flags&LADJUST) |
* should be padded out to `width' places. If |
* flags&ZEROPAD, it should first be prefixed by any |
* sign or other prefix; otherwise, it should be blank |
* padded before the prefix is emitted. After any |
* left-hand padding and prefixing, emit zeroes |
* required by a decimal [diouxX] precision, then print |
* the string proper, then emit zeroes required by any |
* leftover floating precision; finally, if LADJUST, |
* pad with blanks. |
*/ |
/* |
* compute actual size, so we know how much to pad. |
*/ |
fieldsz = size; |
dpad = dprec - size; |
if (dpad < 0) |
dpad = 0; |
if (sign) |
fieldsz++; |
else if (flags & HEXPREFIX) |
fieldsz += 2; |
fieldsz += dpad; |
/* right-adjusting blank padding */ |
if ((flags & (LADJUST|ZEROPAD)) == 0) |
PAD_SP(width - fieldsz); |
/* prefix */ |
if (sign) { |
PRINT(&sign, 1); |
} else if (flags & HEXPREFIX) { |
ox[0] = '0'; |
ox[1] = ch; |
PRINT(ox, 2); |
} |
/* right-adjusting zero padding */ |
if ((flags & (LADJUST|ZEROPAD)) == ZEROPAD) |
PAD_0(width - fieldsz); |
/* leading zeroes from decimal precision */ |
PAD_0(dpad); |
/* the string or number proper */ |
PRINT(cp, size); |
/* left-adjusting padding (always blank) */ |
if (flags & LADJUST) |
PAD_SP(width - fieldsz); |
} |
done: |
va_end(ap); |
} |
/branches/v0.60_MicroMag3_Nick666/printf_P.h |
---|
0,0 → 1,19 |
#ifndef _PRINTF_P_H_ |
#define _PRINTF_P_H_ |
#include <avr/pgmspace.h> |
#define OUT_V24 0 |
#define OUT_LCD 1 |
extern void _printf_P (char, char const *fmt0, ...); |
extern char PrintZiel; |
#define printf_P(format, args...) _printf_P(OUT_V24,format , ## args) |
#define printf(format, args...) _printf_P(OUT_V24,PSTR(format) , ## args) |
#define LCD_printfxy(x,y,format, args...) { DispPtr = y * 20 + x; _printf_P(OUT_LCD,PSTR(format) , ## args);} |
#define LCD_printf(format, args...) { _printf_P(OUT_LCD,PSTR(format) , ## args);} |
#endif |
/branches/v0.60_MicroMag3_Nick666/rc.c |
---|
0,0 → 1,85 |
/*####################################################################################### |
Decodieren eines RC Summen Signals |
#######################################################################################*/ |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Copyright (c) 04.2007 Holger Buss |
// + only for non-profit use |
// + www.MikroKopter.com |
// + see the File "License.txt" for further Informations |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
#include "rc.h" |
#include "main.h" |
volatile int PPM_in[11]; |
volatile int PPM_diff[11]; // das diffenzierte Stick-Signal |
volatile unsigned char NewPpmData = 1; |
//############################################################################ |
//zum decodieren des PPM-Signals wird Timer1 mit seiner Input |
//Capture Funktion benutzt: |
void rc_sum_init (void) |
//############################################################################ |
{ |
TCCR1B=(1<<CS11)|(1<<CS10)|(1<<ICES1)|(1<<ICNC1);//|(1 << WGM12); //timer1 prescale 64 |
// PWM |
//TCCR1A = (1 << COM1B1) | (1 << WGM11) | (1 << WGM10); |
//TCCR1B |= (1 << WGM12); |
//OCR1B = 55; |
TIMSK1 |= _BV(ICIE1); |
AdNeutralGier = 0; |
AdNeutralRoll = 0; |
AdNeutralNick = 0; |
return; |
} |
//############################################################################ |
//Diese Routine startet und inizialisiert den Timer für RC |
SIGNAL(SIG_INPUT_CAPTURE1) |
//############################################################################ |
{ |
static unsigned int AltICR=0; |
signed int signal = 0; |
static int index; |
signal = (unsigned int) ICR1 - AltICR; |
AltICR = ICR1; |
//Syncronisationspause? |
if ((signal > 1500) && (signal < 8000)) |
{ |
index = 1; |
NewPpmData = 0; // Null bedeutet: Neue Daten |
// OCR2A = Poti2/2 + 80; |
} |
else |
{ |
if(index < 10) |
{ |
if((signal > 250) && (signal < 687)) |
{ |
signal -= 466; |
// Stabiles Signal |
if(abs(signal - PPM_in[index]) < 6) { if(SenderOkay < 200) SenderOkay += 10;} |
signal = (3 * (PPM_in[index]) + signal) / 4; |
//373 entspricht ca. 1.5ms also Mittelstellung |
PPM_diff[index] = signal - PPM_in[index]; |
PPM_in[index] = signal; |
} |
index++; |
/* if(index == 5) PORTD |= 0x20; else PORTD &= ~0x20; // Servosignal an J3 anlegen |
if(index == 6) PORTD |= 0x10; else PORTD &= ~0x10; // Servosignal an J4 anlegen |
if(index == 7) PORTD |= 0x08; else PORTD &= ~0x08; // Servosignal an J5 anlegen */ |
} |
} |
} |
/branches/v0.60_MicroMag3_Nick666/rc.h |
---|
0,0 → 1,29 |
/*####################################################################################### |
Derkodieren eines RC Summen Signals |
#######################################################################################*/ |
#ifndef _RC_H |
#define _RC_H |
#if defined (__AVR_ATmega32__) |
#define TIMER_TEILER CK64 |
#define TIMER_RELOAD_VALUE 250 |
#endif |
#if defined (__AVR_ATmega644__) |
//#define TIMER_TEILER CK64 |
#define TIMER_RELOAD_VALUE 250 |
//#define TIMER_TEILER CK256 // bei 20MHz |
//#define TIMER_RELOAD_VALUE -78 // bei 20MHz |
#endif |
#define GAS PPM_in[2] |
extern void rc_sum_init (void); |
extern volatile int PPM_in[11]; |
extern volatile int PPM_diff[11]; // das diffenzierte Stick-Signal |
extern volatile unsigned char NewPpmData; |
#endif //_RC_H |
/branches/v0.60_MicroMag3_Nick666/timer0.c |
---|
0,0 → 1,134 |
#include "main.h" |
volatile unsigned int CountMilliseconds = 0; |
volatile static unsigned int tim_main; |
volatile unsigned char UpdateMotor = 0; |
volatile unsigned int beeptime = 0; |
volatile unsigned int cntKompass = 0; |
int ServoValue = 0; |
enum { |
STOP = 0, |
CK = 1, |
CK8 = 2, |
CK64 = 3, |
CK256 = 4, |
CK1024 = 5, |
T0_FALLING_EDGE = 6, |
T0_RISING_EDGE = 7 |
}; |
SIGNAL (SIG_OVERFLOW0) // 8kHz |
{ |
static unsigned char cnt_1ms = 1,cnt = 0; |
// TCNT0 -= 250;//TIMER_RELOAD_VALUE; |
if(!cnt--) |
{ |
cnt = 9; |
cnt_1ms++; |
cnt_1ms %= 2; |
if(!cnt_1ms) UpdateMotor = 1; |
CountMilliseconds++; |
if(Timeout) Timeout--; |
} |
if(beeptime > 1) |
{ |
beeptime--; |
PORTD |= (1<<PD2); |
} |
else |
PORTD &= ~(1<<PD2); |
if(EE_Parameter.GlobalConfig & CFG_KOMPASS_AKTIV) |
{ |
MM3_timer0(); // Kompass auslesen |
if (!cntKompass--) // Aufruf mit 25 Hz |
{ |
KompassValue = MM3_heading(); |
KompassRichtung = ((540 + KompassValue - KompassStartwert) % 360) - 180; |
cntKompass = 320; |
} |
} |
} |
void Timer_Init(void) |
{ |
tim_main = SetDelay(10); |
TCCR0B = CK8; |
TCCR0A = (1<<COM0A1)|(1<<COM0B1)|3;//fast PWM |
OCR0A = 0; |
OCR0B = 120; |
TCNT0 = -TIMER_RELOAD_VALUE; // reload |
//OCR1 = 0x00; |
TCCR2A=(1<<COM2A1)|(1<<COM2A0)|3; |
TCCR2B=(0<<CS20)|(1<<CS21)|(1<<CS22); |
// TIMSK2 |= _BV(TOIE2); |
TIMSK2 |= _BV(OCIE2A); |
TIMSK0 |= _BV(TOIE0); |
OCR2A = 10; |
TCNT2 = 0; |
} |
// ----------------------------------------------------------------------- |
unsigned int SetDelay (unsigned int t) |
{ |
// TIMSK0 &= ~_BV(TOIE0); |
return(CountMilliseconds + t + 1); |
// TIMSK0 |= _BV(TOIE0); |
} |
// ----------------------------------------------------------------------- |
char CheckDelay(unsigned int t) |
{ |
// TIMSK0 &= ~_BV(TOIE0); |
return(((t - CountMilliseconds) & 0x8000) >> 9); |
// TIMSK0 |= _BV(TOIE0); |
} |
// ----------------------------------------------------------------------- |
void Delay_ms(unsigned int w) |
{ |
unsigned int akt; |
akt = SetDelay(w); |
while (!CheckDelay(akt)); |
} |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Servo ansteuern |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
SIGNAL(SIG_OUTPUT_COMPARE2A) |
{ |
static unsigned char timer = 10; |
if(!timer--) |
{ |
TCCR2A=(1<<COM2A1)|(0<<COM2A0)|3; |
ServoValue = Parameter_ServoNickControl; |
if(EE_Parameter.ServoNickCompInvert & 0x01) ServoValue += ((long) EE_Parameter.ServoNickComp * (IntegralNick / 128)) / 512; |
else ServoValue -= ((long) EE_Parameter.ServoNickComp * (IntegralNick / 128)) / 512; |
if(ServoValue < EE_Parameter.ServoNickMin) ServoValue = EE_Parameter.ServoNickMin; |
else if(ServoValue > EE_Parameter.ServoNickMax) ServoValue = EE_Parameter.ServoNickMax; |
//DebugOut.Analog[10] = ServoValue; |
OCR2A = ServoValue;// + 75; |
timer = EE_Parameter.ServoNickRefresh; |
} |
else |
{ |
TCCR2A =3; |
PORTD&=~0x80; |
} |
} |
/branches/v0.60_MicroMag3_Nick666/timer0.h |
---|
0,0 → 1,14 |
#define TIMER_TEILER CK8 |
#define TIMER_RELOAD_VALUE 250 |
void Timer_Init(void); |
void Delay_ms(unsigned int); |
unsigned int SetDelay (unsigned int t); |
char CheckDelay (unsigned int t); |
extern volatile unsigned int CountMilliseconds; |
extern volatile unsigned char UpdateMotor; |
extern volatile unsigned int beeptime; |
extern volatile unsigned int cntKompass; |
extern int ServoValue; |
/branches/v0.60_MicroMag3_Nick666/twimaster.c |
---|
0,0 → 1,131 |
/*############################################################################ |
############################################################################*/ |
#include "main.h" |
unsigned char twi_state = 0; |
unsigned char motor = 0; |
unsigned char motorread = 0; |
unsigned char motor_rx[8]; |
//############################################################################ |
//Initzialisieren der I2C (TWI) Schnittstelle |
void i2c_init(void) |
//############################################################################ |
{ |
TWSR = 0; |
TWBR = ((SYSCLK/SCL_CLOCK)-16)/2; |
} |
//############################################################################ |
//Start I2C |
char i2c_start(void) |
//############################################################################ |
{ |
TWCR = (1<<TWSTA) | (1<<TWEN) | (1<<TWINT) | (1<<TWIE); |
return(0); |
} |
//############################################################################ |
//Start I2C |
void i2c_stop(void) |
//############################################################################ |
{ |
TWCR = (1<<TWEN) | (1<<TWSTO) | (1<<TWINT); |
} |
//############################################################################ |
//Start I2C |
char i2c_write_byte(char byte) |
//############################################################################ |
{ |
TWSR = 0x00; |
TWDR = byte; |
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWIE); |
return(0); |
} |
//############################################################################ |
//Start I2C |
SIGNAL (TWI_vect) |
//############################################################################ |
{ |
switch (twi_state++) |
{ |
case 0: |
i2c_write_byte(0x52+(motor*2)); |
break; |
case 1: |
switch(motor++) |
{ |
case 0: |
i2c_write_byte(Motor_Vorne); |
break; |
case 1: |
i2c_write_byte(Motor_Hinten); |
break; |
case 2: |
i2c_write_byte(Motor_Rechts); |
break; |
case 3: |
i2c_write_byte(Motor_Links); |
break; |
} |
break; |
case 2: |
i2c_stop(); |
if (motor<4) twi_state = 0; |
else motor = 0; |
i2c_start(); |
break; |
//Liest Daten von Motor |
case 3: |
i2c_write_byte(0x53+(motorread*2)); |
break; |
case 4: |
switch(motorread) |
{ |
case 0: |
i2c_write_byte(Motor_Vorne); |
break; |
case 1: |
i2c_write_byte(Motor_Hinten); |
break; |
case 2: |
i2c_write_byte(Motor_Rechts); |
break; |
case 3: |
i2c_write_byte(Motor_Links); |
break; |
} |
break; |
case 5: //1 Byte vom Motor lesen |
motor_rx[motorread] = TWDR; |
case 6: |
switch(motorread) |
{ |
case 0: |
i2c_write_byte(Motor_Vorne); |
break; |
case 1: |
i2c_write_byte(Motor_Hinten); |
break; |
case 2: |
i2c_write_byte(Motor_Rechts); |
break; |
case 3: |
i2c_write_byte(Motor_Links); |
break; |
} |
break; |
case 7: //2 Byte vom Motor lesen |
motor_rx[motorread+4] = TWDR; |
motorread++; |
if (motorread>3) motorread=0; |
i2c_stop(); |
twi_state = 0; |
} |
} |
/branches/v0.60_MicroMag3_Nick666/twimaster.h |
---|
0,0 → 1,32 |
/*############################################################################ |
############################################################################*/ |
#ifndef _I2C_MASTER_H |
#define _I2C_MASTER_H |
//############################################################################ |
// I2C Konstanten |
#define SCL_CLOCK 200000L |
#define I2C_TIMEOUT 30000 |
#define I2C_START 0x08 |
#define I2C_REPEATED_START 0x10 |
#define I2C_TX_SLA_ACK 0x18 |
#define I2C_TX_DATA_ACK 0x28 |
#define I2C_RX_SLA_ACK 0x40 |
#define I2C_RX_DATA_ACK 0x50 |
//############################################################################ |
extern unsigned char twi_state; |
extern unsigned char motor; |
extern unsigned char motorread; |
extern unsigned char motor_rx[8]; |
void i2c_init (void); // I2C initialisieren |
char i2c_start (void); // Start I2C |
void i2c_stop (void); // Stop I2C |
char i2c_write_byte (char byte); // 1 Byte schreiben |
#endif |
/branches/v0.60_MicroMag3_Nick666/uart.c |
---|
0,0 → 1,328 |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Copyright (c) 04.2007 Holger Buss |
// + only for non-profit use |
// + www.MikroKopter.com |
// + see the File "License.txt" for further Informations |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
#include "main.h" |
#include "uart.h" |
unsigned char DebugGetAnforderung = 0,DebugDisplayAnforderung = 0,DebugDataAnforderung = 0,GetVersionAnforderung = 0; |
unsigned volatile char SioTmp = 0; |
unsigned volatile char SendeBuffer[MAX_SENDE_BUFF]; |
unsigned volatile char RxdBuffer[MAX_EMPFANGS_BUFF]; |
unsigned volatile char NMEABuffer[MAX_EMPFANGS_BUFF]; |
unsigned volatile char NeuerDatensatzEmpfangen = 0; |
unsigned volatile char NeueKoordinateEmpfangen = 0; |
unsigned volatile char UebertragungAbgeschlossen = 1; |
unsigned volatile char CntCrcError = 0; |
unsigned volatile char AnzahlEmpfangsBytes = 0; |
unsigned volatile char PC_DebugTimeout = 0; |
unsigned char PcZugriff = 100; |
unsigned char MotorTest[4] = {0,0,0,0}; |
unsigned char MeineSlaveAdresse; |
struct str_DebugOut DebugOut; |
struct str_Debug DebugIn; |
struct str_VersionInfo VersionInfo; |
int Debug_Timer; |
//+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
//++ Sende-Part der Datenübertragung |
//+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
SIGNAL(INT_VEC_TX) |
{ |
static unsigned int ptr = 0; |
unsigned char tmp_tx; |
if(!UebertragungAbgeschlossen) |
{ |
ptr++; // die [0] wurde schon gesendet |
tmp_tx = SendeBuffer[ptr]; |
if((tmp_tx == '\r') || (ptr == MAX_SENDE_BUFF)) |
{ |
ptr = 0; |
UebertragungAbgeschlossen = 1; |
} |
UDR = tmp_tx; |
} |
else ptr = 0; |
} |
//+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
//++ Empfangs-Part der Datenübertragung, incl. CRC-Auswertung |
//+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
SIGNAL(INT_VEC_RX) |
{ |
static unsigned int crc; |
static unsigned char crc1,crc2,buf_ptr; |
static unsigned char UartState = 0; |
unsigned char CrcOkay = 0; |
SioTmp = UDR; |
if(buf_ptr >= MAX_EMPFANGS_BUFF) UartState = 0; |
if(SioTmp == '\r' && UartState == 2) |
{ |
UartState = 0; |
crc -= RxdBuffer[buf_ptr-2]; |
crc -= RxdBuffer[buf_ptr-1]; |
crc %= 4096; |
crc1 = '=' + crc / 64; |
crc2 = '=' + crc % 64; |
CrcOkay = 0; |
if((crc1 == RxdBuffer[buf_ptr-2]) && (crc2 == RxdBuffer[buf_ptr-1])) CrcOkay = 1; else { CrcOkay = 0; CntCrcError++;}; |
if(!NeuerDatensatzEmpfangen && CrcOkay) // Datensatz schon verarbeitet |
{ |
NeuerDatensatzEmpfangen = 1; |
AnzahlEmpfangsBytes = buf_ptr; |
RxdBuffer[buf_ptr] = '\r'; |
if(/*(RxdBuffer[1] == MeineSlaveAdresse || (RxdBuffer[1] == 'a')) && */(RxdBuffer[2] == 'R')) wdt_enable(WDTO_250MS); // Reset-Commando |
} |
} |
else |
switch(UartState) |
{ |
case 0: |
if(SioTmp == '#' && !NeuerDatensatzEmpfangen) UartState = 1; // Startzeichen und Daten schon verarbeitet |
buf_ptr = 0; |
RxdBuffer[buf_ptr++] = SioTmp; |
crc = SioTmp; |
break; |
case 1: // Adresse auswerten |
UartState++; |
RxdBuffer[buf_ptr++] = SioTmp; |
crc += SioTmp; |
break; |
case 2: // Eingangsdaten sammeln |
RxdBuffer[buf_ptr] = SioTmp; |
if(buf_ptr < MAX_EMPFANGS_BUFF) buf_ptr++; |
else UartState = 0; |
crc += SioTmp; |
break; |
default: |
UartState = 0; |
break; |
} |
} |
// -------------------------------------------------------------------------- |
void AddCRC(unsigned int wieviele) |
{ |
unsigned int tmpCRC = 0,i; |
for(i = 0; i < wieviele;i++) |
{ |
tmpCRC += SendeBuffer[i]; |
} |
tmpCRC %= 4096; |
SendeBuffer[i++] = '=' + tmpCRC / 64; |
SendeBuffer[i++] = '=' + tmpCRC % 64; |
SendeBuffer[i++] = '\r'; |
UebertragungAbgeschlossen = 0; |
UDR = SendeBuffer[0]; |
} |
// -------------------------------------------------------------------------- |
void SendOutData(unsigned char cmd,unsigned char modul, unsigned char *snd, unsigned char len) |
{ |
unsigned int pt = 0; |
unsigned char a,b,c; |
unsigned char ptr = 0; |
SendeBuffer[pt++] = '#'; // Startzeichen |
SendeBuffer[pt++] = modul; // Adresse (a=0; b=1,...) |
SendeBuffer[pt++] = cmd; // Commando |
while(len) |
{ |
if(len) { a = snd[ptr++]; len--;} else a = 0; |
if(len) { b = snd[ptr++]; len--;} else b = 0; |
if(len) { c = snd[ptr++]; len--;} else c = 0; |
SendeBuffer[pt++] = '=' + (a >> 2); |
SendeBuffer[pt++] = '=' + (((a & 0x03) << 4) | ((b & 0xf0) >> 4)); |
SendeBuffer[pt++] = '=' + (((b & 0x0f) << 2) | ((c & 0xc0) >> 6)); |
SendeBuffer[pt++] = '=' + ( c & 0x3f); |
} |
AddCRC(pt); |
} |
// -------------------------------------------------------------------------- |
void Decode64(unsigned char *ptrOut, unsigned char len, unsigned char ptrIn,unsigned char max) // Wohin mit den Daten; Wie lang; Wo im RxdBuffer |
{ |
unsigned char a,b,c,d; |
unsigned char ptr = 0; |
unsigned char x,y,z; |
while(len) |
{ |
a = RxdBuffer[ptrIn++] - '='; |
b = RxdBuffer[ptrIn++] - '='; |
c = RxdBuffer[ptrIn++] - '='; |
d = RxdBuffer[ptrIn++] - '='; |
if(ptrIn > max - 2) break; // nicht mehr Daten verarbeiten, als empfangen wurden |
x = (a << 2) | (b >> 4); |
y = ((b & 0x0f) << 4) | (c >> 2); |
z = ((c & 0x03) << 6) | d; |
if(len--) ptrOut[ptr++] = x; else break; |
if(len--) ptrOut[ptr++] = y; else break; |
if(len--) ptrOut[ptr++] = z; else break; |
} |
} |
// -------------------------------------------------------------------------- |
void BearbeiteRxDaten(void) |
{ |
if(!NeuerDatensatzEmpfangen) return; |
//unsigned int tmp_int_arr1[1]; |
//unsigned int tmp_int_arr2[2]; |
//unsigned int tmp_int_arr3[3]; |
unsigned char tmp_char_arr2[2]; |
//unsigned char tmp_char_arr3[3]; |
//unsigned char tmp_char_arr4[4]; |
//if(!MotorenEin) |
PcZugriff = 255; |
switch(RxdBuffer[2]) |
{ |
case 'c':// Debugdaten incl. Externe IOs usw |
Decode64((unsigned char *) &DebugIn,sizeof(DebugIn),3,AnzahlEmpfangsBytes); |
/* for(unsigned char i=0; i<4;i++) |
{ |
EE_CheckAndWrite(&EE_Buffer[EE_DEBUGWERTE + i*2], DebugIn.Analog[i]); |
EE_CheckAndWrite(&EE_Buffer[EE_DEBUGWERTE + i*2 + 1], DebugIn.Analog[i] >> 8); |
}*/ |
RemoteTasten |= DebugIn.RemoteTasten; |
DebugDataAnforderung = 1; |
break; |
case 'h':// x-1 Displayzeilen |
Decode64((unsigned char *) &tmp_char_arr2[0],sizeof(tmp_char_arr2),3,AnzahlEmpfangsBytes); |
RemoteTasten |= tmp_char_arr2[0]; |
DebugDisplayAnforderung = 1; |
break; |
case 't':// Motortest |
Decode64((unsigned char *) &MotorTest[0],sizeof(MotorTest),3,AnzahlEmpfangsBytes); |
break; |
case 'v': // Version-Anforderung und Ausbaustufe |
GetVersionAnforderung = 1; |
break; |
case 'g':// "Get"-Anforderung für Debug-Daten |
// Bei Get werden die vom PC einstellbaren Werte vom PC zurückgelesen |
DebugGetAnforderung = 1; |
break; |
case 'q':// "Get"-Anforderung für Settings |
// Bei Get werden die vom PC einstellbaren Werte vom PC zurückgelesen |
Decode64((unsigned char *) &tmp_char_arr2[0],sizeof(tmp_char_arr2),3,AnzahlEmpfangsBytes); |
if(tmp_char_arr2[0] != 0xff) |
{ |
if(tmp_char_arr2[0] > 5) tmp_char_arr2[0] = 5; |
ReadParameterSet(tmp_char_arr2[0], (unsigned char *) &EE_Parameter.Kanalbelegung[0], STRUCT_PARAM_LAENGE); |
SendOutData('L' + tmp_char_arr2[0] -1,MeineSlaveAdresse,(unsigned char *) &EE_Parameter.Kanalbelegung[0],STRUCT_PARAM_LAENGE); |
} |
else |
SendOutData('L' + GetActiveParamSetNumber()-1,MeineSlaveAdresse,(unsigned char *) &EE_Parameter.Kanalbelegung[0],STRUCT_PARAM_LAENGE); |
break; |
case 'l': |
case 'm': |
case 'n': |
case 'o': |
case 'p': // Parametersatz speichern |
Decode64((unsigned char *) &EE_Parameter.Kanalbelegung[0],STRUCT_PARAM_LAENGE,3,AnzahlEmpfangsBytes); |
WriteParameterSet(RxdBuffer[2] - 'l' + 1, (unsigned char *) &EE_Parameter.Kanalbelegung[0], STRUCT_PARAM_LAENGE); |
eeprom_write_byte(&EEPromArray[EEPROM_ADR_ACTIVE_SET], RxdBuffer[2] - 'l' + 1); // aktiven Datensatz merken |
Piep(GetActiveParamSetNumber()); |
break; |
} |
// DebugOut.AnzahlZyklen = Debug_Timer_Intervall; |
NeuerDatensatzEmpfangen = 0; |
} |
//############################################################################ |
//Routine für die Serielle Ausgabe |
int uart_putchar (char c) |
//############################################################################ |
{ |
if (c == '\n') |
uart_putchar('\r'); |
//Warten solange bis Zeichen gesendet wurde |
loop_until_bit_is_set(USR, UDRE); |
//Ausgabe des Zeichens |
UDR = c; |
return (0); |
} |
// -------------------------------------------------------------------------- |
void WriteProgramData(unsigned int pos, unsigned char wert) |
{ |
//if (ProgramLocation == IN_RAM) Buffer[pos] = wert; |
// else eeprom_write_byte(&EE_Buffer[pos], wert); |
// Buffer[pos] = wert; |
} |
//############################################################################ |
//INstallation der Seriellen Schnittstelle |
void UART_Init (void) |
//############################################################################ |
{ |
//Enable TXEN im Register UCR TX-Data Enable & RX Enable |
UCR=(1 << TXEN) | (1 << RXEN); |
// UART Double Speed (U2X) |
USR |= (1<<U2X); |
// RX-Interrupt Freigabe |
UCSRB |= (1<<RXCIE); |
// TX-Interrupt Freigabe |
UCSRB |= (1<<TXCIE); |
//Teiler wird gesetzt |
UBRR=(SYSCLK / (BAUD_RATE * 8L) - 1); |
//UBRR = 33; |
//öffnet einen Kanal für printf (STDOUT) |
//fdevopen (uart_putchar, 0); |
//sbi(PORTD,4); |
Debug_Timer = SetDelay(200); |
} |
//--------------------------------------------------------------------------------------------- |
void DatenUebertragung(void) |
{ |
static char dis_zeile = 0; |
if(!UebertragungAbgeschlossen) return; |
if(DebugGetAnforderung && UebertragungAbgeschlossen) // Bei Get werden die vom PC einstellbaren Werte vom PC zurückgelesen |
{ |
SendOutData('G',MeineSlaveAdresse,(unsigned char *) &DebugIn,sizeof(DebugIn)); |
DebugGetAnforderung = 0; |
} |
if((CheckDelay(Debug_Timer) || DebugDataAnforderung) && UebertragungAbgeschlossen) |
{ |
SendOutData('D',MeineSlaveAdresse,(unsigned char *) &DebugOut,sizeof(DebugOut)); |
DebugDataAnforderung = 0; |
Debug_Timer = SetDelay(MIN_DEBUG_INTERVALL); |
} |
if(DebugDisplayAnforderung && UebertragungAbgeschlossen) |
{ |
Menu(); |
DebugDisplayAnforderung = 0; |
if(++dis_zeile == 4) dis_zeile = 0; |
SendOutData('0' + dis_zeile,0,&DisplayBuff[20 * dis_zeile],20); // DisplayZeile übertragen |
} |
if(GetVersionAnforderung && UebertragungAbgeschlossen) |
{ |
SendOutData('V',MeineSlaveAdresse,(unsigned char *) &VersionInfo,sizeof(VersionInfo)); |
GetVersionAnforderung = 0; |
} |
} |
/branches/v0.60_MicroMag3_Nick666/uart.h |
---|
0,0 → 1,95 |
#ifndef _UART_H |
#define _UART_H |
#define MAX_SENDE_BUFF 150 |
#define MAX_EMPFANGS_BUFF 150 |
void BearbeiteRxDaten(void); |
extern unsigned char DebugGetAnforderung; |
extern unsigned volatile char SendeBuffer[MAX_SENDE_BUFF]; |
extern unsigned volatile char RxdBuffer[MAX_EMPFANGS_BUFF]; |
extern unsigned volatile char UebertragungAbgeschlossen; |
extern unsigned volatile char PC_DebugTimeout; |
extern unsigned volatile char NeueKoordinateEmpfangen; |
extern unsigned char MeineSlaveAdresse; |
extern unsigned char PcZugriff; |
extern int Debug_Timer; |
extern void UART_Init (void); |
extern int uart_putchar (char c); |
extern void boot_program_page (uint32_t page, uint8_t *buf); |
extern void DatenUebertragung(void); |
extern void DecodeNMEA(void); |
extern unsigned char MotorTest[4]; |
struct str_DebugOut |
{ |
unsigned char Digital[13]; |
unsigned int AnzahlZyklen; |
unsigned int Zeit; |
unsigned char Sekunden; |
unsigned int Analog[16]; // Debugwerte |
}; |
extern struct str_DebugOut DebugOut; |
struct str_Debug |
{ |
unsigned char Digital[2]; |
unsigned char RemoteTasten; |
unsigned int Analog[4]; |
}; |
extern struct str_Debug DebugIn; |
struct str_VersionInfo |
{ |
unsigned char Hauptversion; |
unsigned char Nebenversion; |
unsigned char PCKompatibel; |
unsigned char Rserved[7]; |
}; |
extern struct str_VersionInfo VersionInfo; |
//Die Baud_Rate der Seriellen Schnittstelle ist 9600 Baud |
//#define BAUD_RATE 9600 //Baud Rate für die Serielle Schnittstelle |
//#define BAUD_RATE 14400 //Baud Rate für die Serielle Schnittstelle |
//#define BAUD_RATE 28800 //Baud Rate für die Serielle Schnittstelle |
//#define BAUD_RATE 38400 //Baud Rate für die Serielle Schnittstelle |
#define BAUD_RATE 57600 //Baud Rate für die Serielle Schnittstelle |
//Anpassen der seriellen Schnittstellen Register wenn ein ATMega128 benutzt wird |
#if defined (__AVR_ATmega128__) |
# define USR UCSR0A |
# define UCR UCSR0B |
# define UDR UDR0 |
# define UBRR UBRR0L |
# define EICR EICRB |
#endif |
#if defined (__AVR_ATmega32__) |
# define USR UCSRA |
# define UCR UCSRB |
# define UBRR UBRRL |
# define EICR EICRB |
# define INT_VEC_RX SIG_UART_RECV |
# define INT_VEC_TX SIG_UART_TRANS |
#endif |
#if defined (__AVR_ATmega644__) |
# define USR UCSR0A |
# define UCR UCSR0B |
# define UDR UDR0 |
# define UBRR UBRR0L |
# define EICR EICR0B |
# define TXEN TXEN0 |
# define RXEN RXEN0 |
# define RXCIE RXCIE0 |
# define TXCIE TXCIE0 |
# define U2X U2X0 |
# define UCSRB UCSR0B |
# define UDRE UDRE0 |
# define INT_VEC_RX SIG_USART_RECV |
# define INT_VEC_TX SIG_USART_TRANS |
#endif |
#endif //_UART_H |
/branches/v0.60_MicroMag3_Nick666/version.txt |
---|
0,0 → 1,49 |
------- |
V0.53 27.04.2007 H.Buss |
- erste öffentliche Version |
V0.53b 29.04.2007 H.Buss |
- der FAKTOR_I war versehentlich auf Null, dann liegt der MikroKopter nicht so hart in der Luft |
V0.53c 29.04.2007 H.Buss |
- es gib ein Menü, in dem die Werte der Kanäle nach Nick, Roll, Gas,... sortiert sind. |
Die angezeigten Werte waren nicht die Werte der Funke |
V0.54 01.05.2007 H.Buss |
- die Paramtersätze können jetzt vor dem Start ausgewählt werden |
Dazu wird beim Kalibrieren der Messwerte (Gashebel oben links) der Nick-Rollhebel abgefragt: |
2 3 4 |
1 x 5 |
- - - |
Bedeutet: Nick-Rollhebel Links Mitte = Setting:1 Links Oben = Setting:2 usw. |
- der Faktor_I für den Hauptregler ist hinzugekommen. Im Heading-Hold-Modus sollte er vergössert werden, was Stabilität bringt |
V0.55 14.05.2007 H.Buss |
- es können nun Servos an J3,J4,J5 mit den Kanälen 5-7 gesteuert werden |
V0.56 14.05.2007 H.Buss |
- es gab Probleme mit Funken, die mehr als 8 Kanäle haben, wenn mehrere Kanäle dann auf Null waren |
- Funken, die nicht bis +-120 aussteuern können, sollten jetzt auch gehen |
V0.57 24.05.2007 H.Buss |
- Der Höhenregler kann nun auch mittels Schalter bedient werden |
- Bug im Gier-Algorithmus behoben; Schnelles Gieren fürhrte dazu, dass der MK zu weit gedreht hat |
- Kompass-Einfluss dämpfen bei Neigung |
- Man kann zwischen Kompass FIX (Richtung beim Kalibrieren) und Variabel (einstellbar per Gier) wählen |
- Der Motortest vom Kopter-Tool geht jetzt |
- Man kann den Parametersätzen einen Namen geben |
- Das Kamerasetting ist unter Setting 2 defaultmässig integriert |
V0.58 30.05.2007 H.Buss |
- Der Höhenregler-Algorithmus wird nun umgangen, wenn der Höhenreglerschalter aus ist |
V0.60 17.08.2007 H.Buss |
- "Schwindel-Bug" behoben |
- Die Poti-Werte werden jetzt auf Unterlauf (<0) überprüft |
- Poti4 zugefügt |
- Es werden jetzt 8 Kanäle ausgewertet |
- Kamera-Servo (an J7) |
- Die Settings müssen überschrieben werden |