0,0 → 1,1205 |
/*####################################################################################### |
Flight Control |
#######################################################################################*/ |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Copyright (c) 04.2007 Holger Buss |
// + Nur für den privaten Gebrauch |
// + www.MikroKopter.com |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Es gilt für das gesamte Projekt (Hardware, Software, Binärfiles, Sourcecode und Dokumentation), |
// + dass eine Nutzung (auch auszugsweise) nur für den privaten (nicht-kommerziellen) Gebrauch zulässig ist. |
// + Sollten direkte oder indirekte kommerzielle Absichten verfolgt werden, ist mit uns (info@mikrokopter.de) Kontakt |
// + bzgl. der Nutzungsbedingungen aufzunehmen. |
// + Eine kommerzielle Nutzung ist z.B.Verkauf von MikroKoptern, Bestückung und Verkauf von Platinen oder Bausätzen, |
// + Verkauf von Luftbildaufnahmen, usw. |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Werden Teile des Quellcodes (mit oder ohne Modifikation) weiterverwendet oder veröffentlicht, |
// + unterliegen sie auch diesen Nutzungsbedingungen und diese Nutzungsbedingungen incl. Copyright müssen dann beiliegen |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Sollte die Software (auch auszugesweise) oder sonstige Informationen des MikroKopter-Projekts |
// + auf anderen Webseiten oder sonstigen Medien veröffentlicht werden, muss unsere Webseite "http://www.mikrokopter.de" |
// + eindeutig als Ursprung verlinkt werden |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Keine Gewähr auf Fehlerfreiheit, Vollständigkeit oder Funktion |
// + Benutzung auf eigene Gefahr |
// + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Die Portierung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur |
// + mit unserer Zustimmung zulässig |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Redistributions of source code (with or without modifications) must retain the above copyright notice, |
// + this list of conditions and the following disclaimer. |
// + * Neither the name of the copyright holders nor the names of contributors may be used to endorse or promote products derived |
// + from this software without specific prior written permission. |
// + * The use of this project (hardware, software, binary files, sources and documentation) is only permittet |
// + for non-commercial use (directly or indirectly) |
// + Commercial use (for excample: selling of MikroKopters, selling of PCBs, assembly, ...) is only permitted |
// + with our written permission |
// + * If sources or documentations are redistributet on other webpages, out webpage (http://www.MikroKopter.de) must be |
// + clearly linked as origin |
// + * porting to systems other than hardware from www.mikrokopter.de is not allowed |
// + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
// + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
// + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
// + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
// + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
// + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
// + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
// + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
// + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
// + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
// + POSSIBILITY OF SUCH DAMAGE. |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Aenderungen von Peter Muehlenbrock ("Salvo") Stand 6.10.2007 |
/* |
Driftkompensation fuer Gyros verbessert |
Linearsensor mit fixem Neutralwert |
Ersatzkompass abgeleitet aus Magnetkompass und Giergyro fuer nahezu neigungsunabhaengige Kompassfunktion |
*/ |
|
#include "main.h" |
#include "eeprom.c" |
|
unsigned char h,m,s; |
volatile unsigned int I2CTimeout = 100; |
volatile int MesswertNick,MesswertRoll,MesswertGier; |
volatile int AdNeutralNick = 0,AdNeutralRoll = 0,AdNeutralGier = 0,StartNeutralRoll = 0,StartNeutralNick = 0; |
volatile int Mittelwert_AccNick, Mittelwert_AccRoll,Mittelwert_AccHoch, NeutralAccX=0, NeutralAccY=0; |
volatile float NeutralAccZ = 0; |
unsigned char CosinusNickWinkel = 0, CosinusRollWinkel = 0; |
volatile long IntegralNick = 0,IntegralNick2 = 0; |
volatile long IntegralRoll = 0,IntegralRoll2 = 0; |
volatile long IntegralAccNick = 0,IntegralAccRoll = 0,IntegralAccZ = 0; |
volatile long Integral_Gier = 0; |
volatile long Mess_IntegralNick = 0,Mess_IntegralNick2 = 0; |
volatile long Mess_IntegralRoll = 0,Mess_IntegralRoll2 = 0; |
volatile long Mess_Integral_Gier = 0,Mess_Integral_Gier2 = 0; |
volatile long MittelIntegralNick,MittelIntegralRoll,MittelIntegralNick2,MittelIntegralRoll2; |
volatile long Mess_Integral_Hoch = 0; |
volatile int KompassValue = 0; |
volatile int KompassStartwert = 0; |
volatile int KompassRichtung = 0; |
unsigned char MAX_GAS,MIN_GAS; |
unsigned char Notlandung = 0; |
unsigned char HoehenReglerAktiv = 0; |
long Umschlag180Nick = 250000L, Umschlag180Roll = 250000L; |
|
//Salvo 12.10.2007 |
uint8_t magkompass_ok=0; |
uint8_t gps_cmd = GPS_CMD_STOP; |
static int ubat_cnt =0; |
static int gas_actual,gas_mittel; //Parameter fuer Gasreduzierung bei unterspannung |
int w,v; |
//Salvo End |
|
//Salvo 2.9.2007 Ersatzkompass |
volatile long GyroKomp_Int; |
volatile int GyroKomp_Value; // Der ermittelte Kompasswert aus Gyro und Magnetkompass |
// Salvo End |
|
float GyroFaktor; |
float IntegralFaktor; |
|
volatile int DiffNick,DiffRoll; |
int Poti1 = 0, Poti2 = 0, Poti3 = 0, Poti4 = 0; |
volatile unsigned char Motor_Vorne,Motor_Hinten,Motor_Rechts,Motor_Links, Count; |
unsigned char MotorWert[5]; |
volatile unsigned char SenderOkay = 0; |
int StickNick = 0,StickRoll = 0,StickGier = 0; |
char MotorenEin = 0; |
int HoehenWert = 0; |
int SollHoehe = 0; |
int I_LageRoll = 0,I_LageNick = 0; |
float Kp = FAKTOR_P; |
float Ki = FAKTOR_I; |
unsigned char Looping_Nick = 0,Looping_Roll = 0; |
unsigned char Looping_Links = 0, Looping_Rechts = 0, Looping_Unten = 0, Looping_Oben = 0; |
|
unsigned char Parameter_Luftdruck_D = 48; // Wert : 0-250 |
unsigned char Parameter_MaxHoehe = 251; // Wert : 0-250 |
unsigned char Parameter_Hoehe_P = 16; // Wert : 0-32 |
unsigned char Parameter_Hoehe_ACC_Wirkung = 58; // Wert : 0-250 |
unsigned char Parameter_KompassWirkung = 64; // Wert : 0-250 |
unsigned char Parameter_Gyro_P = 50; // Wert : 10-250 |
unsigned char Parameter_Gyro_I = 150; // Wert : 0-250 |
unsigned char Parameter_Gier_P = 2; // Wert : 1-20 |
unsigned char Parameter_I_Faktor = 10; // Wert : 1-20 |
unsigned char Parameter_UserParam1 = 0; |
unsigned char Parameter_UserParam2 = 0; |
unsigned char Parameter_UserParam3 = 0; |
unsigned char Parameter_UserParam4 = 0; |
unsigned char Parameter_ServoNickControl = 100; |
unsigned char Parameter_LoopGasLimit = 70; |
unsigned char Parameter_AchsKopplung1 = 0; |
unsigned char Parameter_AchsGegenKopplung1 = 0; |
struct mk_param_struct EE_Parameter; |
|
void Piep(unsigned char Anzahl) |
{ |
while(Anzahl--) |
{ |
if(MotorenEin) return; //auf keinen Fall im Flug! |
beeptime = 100; |
Delay_ms(250); |
} |
} |
|
//############################################################################ |
// Nullwerte ermitteln |
void SetNeutral(void) |
//############################################################################ |
{ |
NeutralAccX = 0; |
NeutralAccY = 0; |
NeutralAccZ = 0; |
AdNeutralNick = 0; |
AdNeutralRoll = 0; |
AdNeutralGier = 0; |
Parameter_AchsKopplung1 = 0; |
Parameter_AchsGegenKopplung1 = 0; |
|
CalibrierMittelwert(); |
Delay_ms_Mess(100); |
CalibrierMittelwert(); |
if((EE_Parameter.GlobalConfig & CFG_HOEHENREGELUNG)) // Höhenregelung aktiviert? |
{ |
if((MessLuftdruck > 950) || (MessLuftdruck < 750)) SucheLuftruckOffset(); |
} |
|
AdNeutralNick= AdWertNick; |
AdNeutralRoll= AdWertRoll; |
AdNeutralGier= AdWertGier; |
StartNeutralRoll = AdNeutralRoll; |
StartNeutralNick = AdNeutralNick; |
|
// Salvo 1.9.2007 ACC mit festen neutralwerten ***** |
if (ACC_NEUTRAL_FIXED > 0) |
{ |
NeutralAccX = ACC_NICK_NEUTRAL; |
NeutralAccY = ACC_ROLL_NEUTRAL; |
} |
else |
{ // Automatisch bei Offsetabgleich ermitteln |
NeutralAccX = abs(Mittelwert_AccNick) / ACC_AMPLIFY; |
NeutralAccY = abs(Mittelwert_AccRoll) / ACC_AMPLIFY; |
} |
// Salvo End |
NeutralAccZ = Aktuell_az; |
|
Mess_IntegralNick = 0; |
Mess_IntegralNick2 = 0; |
Mess_IntegralRoll = 0; |
Mess_IntegralRoll2 = 0; |
Mess_Integral_Gier = 0; |
MesswertNick = 0; |
MesswertRoll = 0; |
MesswertGier = 0; |
StartLuftdruck = Luftdruck; |
HoeheD = 0; |
Mess_Integral_Hoch = 0; |
KompassStartwert = KompassValue; |
GPS_Neutral(); |
beeptime = 50; |
Umschlag180Nick = (long) EE_Parameter.WinkelUmschlagNick * 2500L; |
Umschlag180Roll = (long) EE_Parameter.WinkelUmschlagRoll * 2500L; |
|
//Salvo 13.10.2007 Ersatzkompass und Gas |
GyroKomp_Int = KompassValue * GYROKOMP_INC_GRAD_DEFAULT; //Neu ab 3.1.2007 |
gas_mittel = 30; |
gas_actual = gas_mittel; |
// Salvo End |
} |
|
//############################################################################ |
// Bearbeitet die Messwerte |
void Mittelwert(void) |
//############################################################################ |
{ |
static signed long tmpl,tmpl2; |
MesswertGier = (signed int) AdNeutralGier - AdWertGier; |
MesswertRoll = (signed int) AdWertRoll - AdNeutralRoll; |
MesswertNick = (signed int) AdWertNick - AdNeutralNick; |
|
// Beschleunigungssensor ++++++++++++++++++++++++++++++++++++++++++++++++ |
Mittelwert_AccNick = ((long)Mittelwert_AccNick * 1 + ((ACC_AMPLIFY * (long)AdWertAccNick))) / 2L; |
Mittelwert_AccRoll = ((long)Mittelwert_AccRoll * 1 + ((ACC_AMPLIFY * (long)AdWertAccRoll))) / 2L; |
Mittelwert_AccHoch = ((long)Mittelwert_AccHoch * 1 + ((long)AdWertAccHoch)) / 2L; |
IntegralAccNick += ACC_AMPLIFY * AdWertAccNick; |
IntegralAccRoll += ACC_AMPLIFY * AdWertAccRoll; |
IntegralAccZ += Aktuell_az - 704;//NeutralAccZ; |
// Gier ++++++++++++++++++++++++++++++++++++++++++++++++ |
//Salvo 12.11.2007 |
GyroKomp_Int += MesswertGier; |
//Salvo End |
Mess_Integral_Gier += MesswertGier; |
Mess_Integral_Gier2 += MesswertGier; |
// Kopplungsanteil +++++++++++++++++++++++++++++++++++++ |
if(!Looping_Nick && !Looping_Roll && (EE_Parameter.GlobalConfig & CFG_ACHSENKOPPLUNG_AKTIV)) |
{ |
tmpl = Mess_IntegralNick / 4096L; |
tmpl *= MesswertGier; |
tmpl *= Parameter_AchsKopplung1; //125 |
tmpl /= 2048L; |
tmpl2 = Mess_IntegralRoll / 4096L; |
tmpl2 *= MesswertGier; |
tmpl2 *= Parameter_AchsKopplung1; |
tmpl2 /= 2048L; |
} |
else tmpl = tmpl2 = 0; |
// Roll ++++++++++++++++++++++++++++++++++++++++++++++++ |
MesswertRoll += tmpl; |
MesswertRoll += (tmpl2*Parameter_AchsGegenKopplung1)/512L; //109 |
Mess_IntegralRoll2 += MesswertRoll; |
Mess_IntegralRoll += MesswertRoll - I_LageRoll; |
if(Mess_IntegralRoll > Umschlag180Roll) |
{ |
Mess_IntegralRoll = -(Umschlag180Roll - 10000L); |
Mess_IntegralRoll2 = Mess_IntegralRoll; |
} |
if(Mess_IntegralRoll <-Umschlag180Roll) |
{ |
Mess_IntegralRoll = (Umschlag180Roll - 10000L); |
Mess_IntegralRoll2 = Mess_IntegralRoll; |
} |
if(AdWertRoll < 15) MesswertRoll = -1000; |
if(AdWertRoll < 7) MesswertRoll = -2000; |
if(PlatinenVersion == 10) |
{ |
if(AdWertRoll > 1010) MesswertRoll = +1000; |
if(AdWertRoll > 1017) MesswertRoll = +2000; |
} |
else |
{ |
if(AdWertRoll > 2020) MesswertRoll = +1000; |
if(AdWertRoll > 2034) MesswertRoll = +2000; |
} |
// Nick ++++++++++++++++++++++++++++++++++++++++++++++++ |
MesswertNick -= tmpl2; |
MesswertNick -= (tmpl*Parameter_AchsGegenKopplung1)/512L; |
Mess_IntegralNick2 += MesswertNick; |
Mess_IntegralNick += MesswertNick - I_LageNick; |
if(Mess_IntegralNick > Umschlag180Nick) |
{ |
Mess_IntegralNick = -(Umschlag180Nick - 10000L); |
Mess_IntegralNick2 = Mess_IntegralNick; |
} |
if(Mess_IntegralNick <-Umschlag180Nick) |
{ |
Mess_IntegralNick = (Umschlag180Nick - 10000L); |
Mess_IntegralNick2 = Mess_IntegralNick; |
} |
if(AdWertNick < 15) MesswertNick = -1000; |
if(AdWertNick < 7) MesswertNick = -2000; |
if(PlatinenVersion == 10) |
{ |
if(AdWertNick > 1010) MesswertNick = +1000; |
if(AdWertNick > 1017) MesswertNick = +2000; |
} |
else |
{ |
if(AdWertNick > 2020) MesswertNick = +1000; |
if(AdWertNick > 2034) MesswertNick = +2000; |
} |
//++++++++++++++++++++++++++++++++++++++++++++++++ |
// ADC einschalten |
ANALOG_ON; |
//++++++++++++++++++++++++++++++++++++++++++++++++ |
DebugOut.Analog[11] = MesswertRoll; |
|
Integral_Gier = Mess_Integral_Gier; |
IntegralNick = Mess_IntegralNick; |
IntegralRoll = Mess_IntegralRoll; |
IntegralNick2 = Mess_IntegralNick2; |
IntegralRoll2 = Mess_IntegralRoll2; |
|
if(EE_Parameter.GlobalConfig & CFG_DREHRATEN_BEGRENZER && !Looping_Nick && !Looping_Roll) |
{ |
if(MesswertNick > 200) MesswertNick += 4 * (MesswertNick - 200); |
else if(MesswertNick < -200) MesswertNick += 4 * (MesswertNick + 200); |
if(MesswertRoll > 200) MesswertRoll += 4 * (MesswertRoll - 200); |
else if(MesswertRoll < -200) MesswertRoll += 4 * (MesswertRoll + 200); |
} |
if(Poti1 < PPM_in[EE_Parameter.Kanalbelegung[K_POTI1]] + 110) Poti1++; else if(Poti1 > PPM_in[EE_Parameter.Kanalbelegung[K_POTI1]] + 110 && Poti1) Poti1--; |
if(Poti2 < PPM_in[EE_Parameter.Kanalbelegung[K_POTI2]] + 110) Poti2++; else if(Poti2 > PPM_in[EE_Parameter.Kanalbelegung[K_POTI2]] + 110 && Poti2) Poti2--; |
if(Poti3 < PPM_in[EE_Parameter.Kanalbelegung[K_POTI3]] + 110) Poti3++; else if(Poti3 > PPM_in[EE_Parameter.Kanalbelegung[K_POTI3]] + 110 && Poti3) Poti3--; |
if(Poti4 < PPM_in[EE_Parameter.Kanalbelegung[K_POTI4]] + 110) Poti4++; else if(Poti4 > PPM_in[EE_Parameter.Kanalbelegung[K_POTI4]] + 110 && Poti4) Poti4--; |
if(Poti1 < 0) Poti1 = 0; else if(Poti1 > 255) Poti1 = 255; |
if(Poti2 < 0) Poti2 = 0; else if(Poti2 > 255) Poti2 = 255; |
if(Poti3 < 0) Poti3 = 0; else if(Poti3 > 255) Poti3 = 255; |
if(Poti4 < 0) Poti4 = 0; else if(Poti4 > 255) Poti4 = 255; |
} |
|
//############################################################################ |
// Messwerte beim Ermitteln der Nullage |
void CalibrierMittelwert(void) |
//############################################################################ |
{ |
// ADC auschalten, damit die Werte sich nicht während der Berechnung ändern |
ANALOG_OFF; |
MesswertNick = AdWertNick; |
MesswertRoll = AdWertRoll; |
MesswertGier = AdWertGier; |
Mittelwert_AccNick = ACC_AMPLIFY * (long)AdWertAccNick; |
Mittelwert_AccRoll = ACC_AMPLIFY * (long)AdWertAccRoll; |
Mittelwert_AccHoch = (long)AdWertAccHoch; |
// ADC einschalten |
ANALOG_ON; |
if(Poti1 < PPM_in[EE_Parameter.Kanalbelegung[K_POTI1]] + 110) Poti1++; else if(Poti1 > PPM_in[EE_Parameter.Kanalbelegung[K_POTI1]] + 110 && Poti1) Poti1--; |
if(Poti2 < PPM_in[EE_Parameter.Kanalbelegung[K_POTI2]] + 110) Poti2++; else if(Poti2 > PPM_in[EE_Parameter.Kanalbelegung[K_POTI2]] + 110 && Poti2) Poti2--; |
if(Poti3 < PPM_in[EE_Parameter.Kanalbelegung[K_POTI3]] + 110) Poti3++; else if(Poti3 > PPM_in[EE_Parameter.Kanalbelegung[K_POTI3]] + 110 && Poti3) Poti3--; |
if(Poti4 < PPM_in[EE_Parameter.Kanalbelegung[K_POTI4]] + 110) Poti4++; else if(Poti4 > PPM_in[EE_Parameter.Kanalbelegung[K_POTI4]] + 110 && Poti4) Poti4--; |
if(Poti1 < 0) Poti1 = 0; else if(Poti1 > 255) Poti1 = 255; |
if(Poti2 < 0) Poti2 = 0; else if(Poti2 > 255) Poti2 = 255; |
if(Poti3 < 0) Poti3 = 0; else if(Poti3 > 255) Poti3 = 255; |
if(Poti4 < 0) Poti4 = 0; else if(Poti4 > 255) Poti4 = 255; |
|
Umschlag180Nick = (long) EE_Parameter.WinkelUmschlagNick * 2500L; |
Umschlag180Roll = (long) EE_Parameter.WinkelUmschlagNick * 2500L; |
} |
|
//############################################################################ |
// Senden der Motorwerte per I2C-Bus |
void SendMotorData(void) |
//############################################################################ |
{ |
if(MOTOR_OFF || !MotorenEin) |
{ |
Motor_Hinten = 0; |
Motor_Vorne = 0; |
Motor_Rechts = 0; |
Motor_Links = 0; |
if(MotorTest[0]) Motor_Vorne = MotorTest[0]; |
if(MotorTest[1]) Motor_Hinten = MotorTest[1]; |
if(MotorTest[2]) Motor_Links = MotorTest[2]; |
if(MotorTest[3]) Motor_Rechts = MotorTest[3]; |
} |
|
DebugOut.Analog[12] = Motor_Vorne; |
DebugOut.Analog[13] = Motor_Hinten; |
DebugOut.Analog[14] = Motor_Links; |
DebugOut.Analog[15] = Motor_Rechts; |
|
//Start I2C Interrupt Mode |
twi_state = 0; |
motor = 0; |
i2c_start(); |
} |
|
|
|
//############################################################################ |
// Trägt ggf. das Poti als Parameter ein |
void ParameterZuordnung(void) |
//############################################################################ |
{ |
|
#define CHK_POTI(b,a,min,max) { if(a > 250) { if(a == 251) b = Poti1; else if(a == 252) b = Poti2; else if(a == 253) b = Poti3; else if(a == 254) b = Poti4;} else b = a; if(b <= min) b = min; else if(b >= max) b = max;} |
CHK_POTI(Parameter_MaxHoehe,EE_Parameter.MaxHoehe,0,255); |
CHK_POTI(Parameter_Luftdruck_D,EE_Parameter.Luftdruck_D,0,100); |
CHK_POTI(Parameter_Hoehe_P,EE_Parameter.Hoehe_P,0,100); |
CHK_POTI(Parameter_Hoehe_ACC_Wirkung,EE_Parameter.Hoehe_ACC_Wirkung,0,255); |
CHK_POTI(Parameter_KompassWirkung,EE_Parameter.KompassWirkung,0,255); |
CHK_POTI(Parameter_Gyro_P,EE_Parameter.Gyro_P,10,255); |
CHK_POTI(Parameter_Gyro_I,EE_Parameter.Gyro_I,0,255); |
CHK_POTI(Parameter_I_Faktor,EE_Parameter.I_Faktor,0,255); |
CHK_POTI(Parameter_UserParam1,EE_Parameter.UserParam1,0,255); |
CHK_POTI(Parameter_UserParam2,EE_Parameter.UserParam2,0,255); |
CHK_POTI(Parameter_UserParam3,EE_Parameter.UserParam3,0,255); |
CHK_POTI(Parameter_UserParam4,EE_Parameter.UserParam4,0,255); |
CHK_POTI(Parameter_ServoNickControl,EE_Parameter.ServoNickControl,0,255); |
CHK_POTI(Parameter_LoopGasLimit,EE_Parameter.LoopGasLimit,0,255); |
CHK_POTI(Parameter_AchsKopplung1, EE_Parameter.AchsKopplung1,0,255); |
CHK_POTI(Parameter_AchsGegenKopplung1,EE_Parameter.AchsGegenKopplung1,0,255); |
|
Ki = (float) Parameter_I_Faktor * 0.0001; |
MAX_GAS = EE_Parameter.Gas_Max; |
MIN_GAS = EE_Parameter.Gas_Min; |
} |
|
|
//############################################################################ |
// |
void MotorRegler(void) |
//############################################################################ |
{ |
int motorwert,pd_ergebnis,h,tmp_int; |
int GierMischanteil,GasMischanteil; |
static long SummeNick=0,SummeRoll=0; |
static long sollGier = 0,tmp_long,tmp_long2; |
static long IntegralFehlerNick = 0; |
static long IntegralFehlerRoll = 0; |
static unsigned int RcLostTimer; |
static unsigned char delay_neutral = 0; |
static unsigned char delay_einschalten = 0,delay_ausschalten = 0; |
static unsigned int modell_fliegt = 0; |
static int hoehenregler = 0; |
static char TimerWerteausgabe = 0; |
static char NeueKompassRichtungMerken = 0; |
static long ausgleichNick, ausgleichRoll; |
|
Mittelwert(); |
//****** GPS Daten holen *************** |
short int n; |
if (gps_alive_cnt > 0) gps_alive_cnt--; //Dekrementieren. Wenn 0 kommen keine ausreichenden GPS Meldungen (Timeout) |
n = Get_Rel_Position(); |
if (n == 0) |
{ |
ROT_ON; //led blitzen lassen |
} |
//******PROVISORISCH*************** |
GRN_ON; |
|
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Gaswert ermitteln |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
GasMischanteil = PPM_in[EE_Parameter.Kanalbelegung[K_GAS]] + 120; |
//Salvo 13.10.2007 langsame Gasreduktion bei Unterspannung. Als Ausgangswert wird der bei UBAT=k gemessen Mittelwert genommen |
// und dieser dann langsam zwangsweise reduziert |
if (UBat <= EE_Parameter.UnterspannungsWarnung - 2) //Unterhalb der Piepser Schwelle aktivieren |
{ |
if (ubat_cnt > 700) |
{ |
ubat_cnt = 0; |
if (gas_actual > ((gas_mittel*12)/15)) gas_actual--; |
} |
else ubat_cnt++; |
if (GasMischanteil > gas_actual) GasMischanteil = gas_actual; |
} |
else //Falls UBAT wieder ok ist |
{ |
if (ubat_cnt > 1000) |
{ |
gas_mittel = ((gas_mittel*9) + GasMischanteil)/10; //Filtern |
gas_actual = GasMischanteil; |
} |
else |
{ |
ubat_cnt++; |
if ((ubat_cnt % 10) == 0) |
{ |
if (gas_actual < GasMischanteil) gas_actual++; |
else gas_actual = GasMischanteil; |
} |
} |
GasMischanteil = gas_actual; |
} |
// Salvo End |
if(GasMischanteil < 0) GasMischanteil = 0; |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Empfang schlecht |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
if(SenderOkay < 100) |
{ |
if(!PcZugriff) |
{ |
if(BeepMuster == 0xffff) |
{ |
beeptime = 15000; |
BeepMuster = 0x0c00; |
} |
} |
if(RcLostTimer) RcLostTimer--; |
else |
{ |
MotorenEin = 0; |
Notlandung = 0; |
} |
ROT_ON; |
if(modell_fliegt > 2000) // wahrscheinlich in der Luft --> langsam absenken |
{ |
GasMischanteil = EE_Parameter.NotGas; |
Notlandung = 1; |
PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] = 0; |
PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] = 0; |
PPM_in[EE_Parameter.Kanalbelegung[K_GIER]] = 0; |
} |
else MotorenEin = 0; |
} |
else |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Emfang gut |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
if(SenderOkay > 140) |
{ |
Notlandung = 0; |
RcLostTimer = EE_Parameter.NotGasZeit * 50; |
if(GasMischanteil > 40) |
{ |
if(modell_fliegt < 0xffff) modell_fliegt++; |
} |
if((modell_fliegt < 200) || (GasMischanteil < 40)) |
{ |
SummeNick = 0; |
SummeRoll = 0; |
Mess_Integral_Gier = 0; |
Mess_Integral_Gier2 = 0; |
} |
if((GasMischanteil > 200) && MotorenEin == 0) |
{ |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// auf Nullwerte kalibrieren |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
if(PPM_in[EE_Parameter.Kanalbelegung[K_GIER]] > 75) // Neutralwerte |
{ |
unsigned char setting = 2; |
if(++delay_neutral > 200) // nicht sofort |
{ |
GRN_OFF; |
SetNeutral(); |
MotorenEin = 0; |
delay_neutral = 0; |
modell_fliegt = 0; |
if(PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] > 70 || abs(PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]]) > 70) |
{ |
unsigned char setting=1; |
if(PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] > 70 && PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] < 70) setting = 1; |
if(PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] > 70 && PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] > 70) setting = 2; |
if(PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] < 70 && PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] > 70) setting = 3; |
if(PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] <-70 && PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] > 70) setting = 4; |
if(PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] <-70 && PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] < 70) setting = 5; |
eeprom_write_byte(&EEPromArray[EEPROM_ADR_ACTIVE_SET], setting); // aktiven Datensatz merken |
} |
|
|
|
|
ReadParameterSet(GetActiveParamSetNumber(), (unsigned char *) &EE_Parameter.Kanalbelegung[0], STRUCT_PARAM_LAENGE); |
|
Piep(GetActiveParamSetNumber()); |
if((EE_Parameter.GlobalConfig & CFG_HOEHENREGELUNG)) // Höhenregelung aktiviert? |
{ |
if((MessLuftdruck > 950) || (MessLuftdruck < 750)) SucheLuftruckOffset(); |
} |
GPS_Save_Home(); //Daten sind jetzt hoffentlich verfuegbar |
if (gps_home_position.status > 0 ) |
{ |
Delay_ms(1000); //akustisch verkuenden dass GPS Home Daten da sind |
beeptime = 2000; |
Delay_ms(500); |
} |
} |
} |
else delay_neutral = 0; |
} |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Gas ist unten |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
if(GasMischanteil < 35) |
{ |
// Starten |
if(PPM_in[EE_Parameter.Kanalbelegung[K_GIER]] < -75) |
{ |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Einschalten |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
if(++delay_einschalten > 200) |
{ |
delay_einschalten = 200; |
modell_fliegt = 1; |
MotorenEin = 1; |
sollGier = 0; |
Mess_Integral_Gier = 0; |
Mess_Integral_Gier2 = 0; |
Mess_IntegralNick = 0; |
Mess_IntegralRoll = 0; |
Mess_IntegralNick2 = IntegralNick; |
Mess_IntegralRoll2 = IntegralRoll; |
SummeNick = 0; |
SummeRoll = 0; |
} |
} |
else delay_einschalten = 0; |
//Auf Neutralwerte setzen |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Auschalten |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
if(PPM_in[EE_Parameter.Kanalbelegung[K_GIER]] > 75) |
{ |
if(++delay_ausschalten > 200) // nicht sofort |
{ |
MotorenEin = 0; |
delay_ausschalten = 200; |
modell_fliegt = 0; |
} |
} |
else delay_ausschalten = 0; |
} |
} |
|
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// neue Werte von der Funke |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
if(!NewPpmData-- || Notlandung) |
{ |
ParameterZuordnung(); |
StickNick = PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] * EE_Parameter.Stick_P; |
StickNick += PPM_diff[EE_Parameter.Kanalbelegung[K_NICK]] * EE_Parameter.Stick_D; |
StickRoll = PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] * EE_Parameter.Stick_P; |
StickRoll += PPM_diff[EE_Parameter.Kanalbelegung[K_ROLL]] * EE_Parameter.Stick_D; |
StickGier = -PPM_in[EE_Parameter.Kanalbelegung[K_GIER]]; |
GyroFaktor = ((float)Parameter_Gyro_P + 10.0) / 256.0; |
IntegralFaktor = ((float) Parameter_Gyro_I) / 44000; |
|
if(EE_Parameter.GlobalConfig & CFG_HEADING_HOLD) IntegralFaktor = 0; |
if(GyroFaktor < 0) GyroFaktor = 0; |
if(IntegralFaktor < 0) IntegralFaktor = 0; |
// greift in den Stick ein, um ungewolltes überschlagen zu verhindern |
if(!(EE_Parameter.LoopConfig & CFG_LOOP_LINKS) && !(EE_Parameter.LoopConfig & CFG_LOOP_RECHTS)) |
{ |
if(IntegralNick > 60000) |
{ |
StickNick -= 8 * EE_Parameter.Stick_P; |
if(IntegralNick > 80000) StickNick -= 16 * EE_Parameter.Stick_P; |
} |
else |
if(IntegralNick < -60000) |
{ |
StickNick += 8 * EE_Parameter.Stick_P; |
if(IntegralNick > 80000) StickNick -= 16 * EE_Parameter.Stick_P; |
} |
if(IntegralRoll > 60000) |
{ |
StickRoll -= 8 * EE_Parameter.Stick_P; |
if(IntegralRoll > 80000) StickRoll -= 16 * EE_Parameter.Stick_P; |
} |
else |
if(IntegralRoll < -60000) |
{ |
StickRoll += 8 * EE_Parameter.Stick_P; |
if(IntegralRoll > 80000) StickRoll -= 16 * EE_Parameter.Stick_P; |
} |
} |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Looping? |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
if((PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] > EE_Parameter.LoopThreshold) && EE_Parameter.LoopConfig & CFG_LOOP_LINKS) Looping_Links = 1; |
else |
{ |
{ |
if((PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] < (EE_Parameter.LoopThreshold - EE_Parameter.LoopHysterese))) Looping_Links = 0; |
} |
} |
if((PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] < -EE_Parameter.LoopThreshold) && EE_Parameter.LoopConfig & CFG_LOOP_RECHTS) Looping_Rechts = 1; |
else |
{ |
if(Looping_Rechts) // Hysterese |
{ |
if(PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] > -(EE_Parameter.LoopThreshold - EE_Parameter.LoopHysterese)) Looping_Rechts = 0; |
} |
} |
|
if((PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] > EE_Parameter.LoopThreshold) && EE_Parameter.LoopConfig & CFG_LOOP_OBEN) Looping_Oben = 1; |
else |
{ |
if(Looping_Oben) // Hysterese |
{ |
if((PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] < (EE_Parameter.LoopThreshold - EE_Parameter.LoopHysterese))) Looping_Oben = 0; |
} |
} |
if((PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] < -EE_Parameter.LoopThreshold) && EE_Parameter.LoopConfig & CFG_LOOP_UNTEN) Looping_Unten = 1; |
else |
{ |
if(Looping_Unten) // Hysterese |
{ |
if(PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] > -(EE_Parameter.LoopThreshold - EE_Parameter.LoopHysterese)) Looping_Unten = 0; |
} |
} |
|
if(Looping_Links || Looping_Rechts) Looping_Roll = 1; else Looping_Roll = 0; |
if(Looping_Oben || Looping_Unten) {Looping_Nick = 1; Looping_Roll = 0; Looping_Links = 0; Looping_Rechts = 0;} else Looping_Nick = 0; |
} // Ende neue Funken-Werte |
|
if(Looping_Roll) beeptime = 100; |
if(Looping_Roll || Looping_Nick) |
{ |
if(GasMischanteil > EE_Parameter.LoopGasLimit) GasMischanteil = EE_Parameter.LoopGasLimit; |
} |
|
|
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Bei Empfangsausfall im Flug |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
if(Notlandung) |
{ |
StickGier = 0; |
StickNick = 0; |
StickRoll = 0; |
GyroFaktor = 0.1; |
IntegralFaktor = 0.005; |
Looping_Roll = 0; |
Looping_Nick = 0; |
} |
|
|
|
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Integrale auf ACC-Signal abgleichen |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
#define ABGLEICH_ANZAHL 256L |
|
MittelIntegralNick += IntegralNick; // Für die Mittelwertbildung aufsummieren |
MittelIntegralRoll += IntegralRoll; |
MittelIntegralNick2 += IntegralNick2; |
MittelIntegralRoll2 += IntegralRoll2; |
|
if(Looping_Nick || Looping_Roll) |
{ |
IntegralAccNick = 0; |
IntegralAccRoll = 0; |
MittelIntegralNick = 0; |
MittelIntegralRoll = 0; |
MittelIntegralNick2 = 0; |
MittelIntegralRoll2 = 0; |
Mess_IntegralNick2 = Mess_IntegralNick; |
Mess_IntegralRoll2 = Mess_IntegralRoll; |
ZaehlMessungen = 0; |
I_LageNick = 0; |
I_LageRoll = 0; |
} |
|
if(ZaehlMessungen >= ABGLEICH_ANZAHL) |
{ |
static int cnt = 0; |
static char last_n_p,last_n_n,last_r_p,last_r_n; |
static long MittelIntegralNick_Alt,MittelIntegralRoll_Alt; |
if(!Looping_Nick && !Looping_Roll) |
{ |
MittelIntegralNick /= ABGLEICH_ANZAHL; |
MittelIntegralRoll /= ABGLEICH_ANZAHL; |
IntegralAccNick = (EE_Parameter.GyroAccFaktor * IntegralAccNick) / ABGLEICH_ANZAHL; |
IntegralAccRoll = (EE_Parameter.GyroAccFaktor * IntegralAccRoll) / ABGLEICH_ANZAHL; |
IntegralAccZ = IntegralAccZ / ABGLEICH_ANZAHL; |
#define MAX_I 32 |
// Nick ++++++++++++++++++++++++++++++++++++++++++++++++ |
IntegralFehlerNick = (long)(MittelIntegralNick - (long)IntegralAccNick); |
ausgleichNick = IntegralFehlerNick / EE_Parameter.GyroAccAbgleich; |
if(labs(MittelIntegralNick_Alt - MittelIntegralNick) < 5000) |
{ |
tmp_long = IntegralFehlerNick / 700L; |
if(tmp_long > MAX_I) tmp_long = MAX_I; |
if(tmp_long <-MAX_I) tmp_long =-MAX_I; |
I_LageNick = tmp_long; |
} |
else |
{ |
I_LageNick /= 2; |
} |
// Roll ++++++++++++++++++++++++++++++++++++++++++++++++ |
IntegralFehlerRoll = (long)(MittelIntegralRoll - (long)IntegralAccRoll); |
ausgleichRoll = IntegralFehlerRoll / EE_Parameter.GyroAccAbgleich; |
if(labs(MittelIntegralRoll_Alt - MittelIntegralRoll) < 5000) |
{ |
tmp_long2 = IntegralFehlerRoll / 700L; |
if(tmp_long2 > MAX_I) tmp_long2 = MAX_I; |
if(tmp_long2 <-MAX_I) tmp_long2 =-MAX_I; |
I_LageRoll = tmp_long2; |
} |
else |
{ |
I_LageRoll /=2; |
} |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++ |
MittelIntegralNick_Alt = MittelIntegralNick; |
MittelIntegralRoll_Alt = MittelIntegralRoll; |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++ |
Mess_IntegralNick -= ausgleichNick; |
Mess_IntegralRoll -= ausgleichRoll; |
|
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Gyro-Drift ermitteln |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
MittelIntegralNick2 /= ABGLEICH_ANZAHL; |
MittelIntegralRoll2 /= ABGLEICH_ANZAHL; |
tmp_long = (long)(MittelIntegralNick2 - (long)IntegralAccNick); |
tmp_long2 = (long)(MittelIntegralRoll2 - (long)IntegralAccRoll); |
//DebugOut.Analog[25] = MittelIntegralRoll2 / 26; |
|
IntegralFehlerNick = tmp_long; |
IntegralFehlerRoll = tmp_long2; |
Mess_IntegralNick2 -= IntegralFehlerNick; |
Mess_IntegralRoll2 -= IntegralFehlerRoll; |
|
// IntegralFehlerNick = (IntegralFehlerNick * 1 + tmp_long) / 2; |
// IntegralFehlerRoll = (IntegralFehlerRoll * 1 + tmp_long2) / 2; |
|
//Salvo Ersatzkompass Ueberlauf korrigieren |
if (GyroKomp_Int >= ((long)360 * GYROKOMP_INC_GRAD_DEFAULT)) GyroKomp_Int = GyroKomp_Int - (GYROKOMP_INC_GRAD_DEFAULT *(long)360); //neu ab 3.11.2007 |
if (GyroKomp_Int < 0) GyroKomp_Int = GyroKomp_Int + (GYROKOMP_INC_GRAD_DEFAULT *(long)360); //neu ab 3.11.2007 |
ROT_OFF; |
// Salvo End |
|
/* |
DebugOut.Analog[30] = I_LageRoll * 10; |
DebugOut.Analog[17] = IntegralAccNick / 26; |
DebugOut.Analog[18] = IntegralAccRoll / 26; |
DebugOut.Analog[19] = IntegralFehlerNick;// / 26; |
DebugOut.Analog[20] = IntegralFehlerRoll;// / 26; |
DebugOut.Analog[21] = MittelIntegralNick / 26; |
DebugOut.Analog[22] = MittelIntegralRoll / 26; |
DebugOut.Analog[28] = ausgleichNick; |
DebugOut.Analog[29] = ausgleichRoll; |
*/ |
|
#define FEHLER_LIMIT (ABGLEICH_ANZAHL/2) |
#define FEHLER_LIMIT2 (ABGLEICH_ANZAHL*4) |
|
// Nick +++++++++++++++++++++++++++++++++++++++++++++++++ |
cnt = 1;// + labs(IntegralFehlerNick) / 4096; |
if(IntegralFehlerNick > FEHLER_LIMIT2) |
{ |
if(last_n_p) |
{ |
cnt += labs(IntegralFehlerNick) / FEHLER_LIMIT2; |
ausgleichNick = IntegralFehlerNick / 8; |
if(ausgleichNick > 5000) ausgleichNick = 5000; |
Mess_IntegralNick -= ausgleichNick; |
} |
else last_n_p = 1; |
} else last_n_p = 0; |
if(IntegralFehlerNick < -FEHLER_LIMIT2) |
{ |
if(last_n_n) |
{ |
cnt += labs(IntegralFehlerNick) / FEHLER_LIMIT2; |
ausgleichNick = IntegralFehlerNick / 8; |
if(ausgleichNick < -5000) ausgleichNick = -5000; |
Mess_IntegralNick -= ausgleichNick; |
} |
else last_n_n = 1; |
} else last_n_n = 0; |
|
if(cnt > 3) cnt = 3; |
if(IntegralFehlerNick > FEHLER_LIMIT) AdNeutralNick += cnt; |
if(IntegralFehlerNick < -FEHLER_LIMIT) AdNeutralNick -= cnt; |
|
// Roll +++++++++++++++++++++++++++++++++++++++++++++++++ |
cnt = 1;// + labs(IntegralFehlerRoll) / 4096; |
ausgleichRoll = 0; |
if(IntegralFehlerRoll > FEHLER_LIMIT2) |
{ |
if(last_r_p) |
{ |
cnt += labs(IntegralFehlerRoll) / FEHLER_LIMIT2; |
ausgleichRoll = IntegralFehlerRoll / 4; |
if(ausgleichRoll > 5000) ausgleichRoll = 5000; |
Mess_IntegralRoll -= ausgleichRoll; |
} |
else last_r_p = 1; |
} else last_r_p = 0; |
if(IntegralFehlerRoll < -FEHLER_LIMIT2) |
{ |
if(last_r_n) |
{ |
cnt += labs(IntegralFehlerRoll) / FEHLER_LIMIT2; |
ausgleichRoll = IntegralFehlerRoll / 4; |
if(ausgleichRoll < -5000) ausgleichRoll = -5000; |
Mess_IntegralRoll -= ausgleichRoll; |
} |
else last_r_n = 1; |
} else last_r_n = 0; |
|
DebugOut.Analog[27] = ausgleichRoll; |
if(cnt > 3) cnt = 3; |
if(IntegralFehlerRoll > FEHLER_LIMIT) AdNeutralRoll += cnt; |
if(IntegralFehlerRoll < -FEHLER_LIMIT) AdNeutralRoll -= cnt; |
DebugOut.Analog[24] = 10*(AdNeutralRoll - StartNeutralRoll); |
} |
IntegralAccNick = 0; |
IntegralAccRoll = 0; |
IntegralAccZ = 0; |
MittelIntegralNick = 0; |
MittelIntegralRoll = 0; |
MittelIntegralNick2 = 0; |
MittelIntegralRoll2 = 0; |
ZaehlMessungen = 0; |
} |
|
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Gieren |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
if(abs(StickGier) > 20) // war 35 |
{ |
if(!(EE_Parameter.GlobalConfig & CFG_KOMPASS_FIX)) NeueKompassRichtungMerken = 1; |
} |
tmp_int = (long) EE_Parameter.Gier_P * ((long)StickGier * abs(StickGier)) / 512L; // expo y = ax + bx² |
tmp_int += (EE_Parameter.Gier_P * StickGier) / 4; |
sollGier = tmp_int; |
Mess_Integral_Gier -= tmp_int; |
if(Mess_Integral_Gier > 50000) Mess_Integral_Gier = 50000; // begrenzen |
if(Mess_Integral_Gier <-50000) Mess_Integral_Gier =-50000; |
|
// Salvo Ersatzkompass 26.9.2007 ********************** |
if ((Kompass_Neuer_Wert > 0)) |
{ |
Kompass_Neuer_Wert = 0; |
w = (abs(Mittelwert_AccNick)); |
v = (abs(Mittelwert_AccRoll)); |
if ((w < ACC_WAAGRECHT_LIMIT) && (v < ACC_WAAGRECHT_LIMIT)) //Ersatzkompass nur mit Magnetkompass aktualisieren wenn alles ok |
{ |
if ((abs(KompassValue - Kompass_Value_Old)) <= 5) // Aufeinanderfolgende Werte duerfen nur minimal abweichen |
{ |
magkompass_ok = 1; // Flag dass Magnetkompass stabil arbeitet |
GyroKomp_Int = (GyroKomp_Int )/GYROKOMP_INC_GRAD_DEFAULT; |
w = KompassValue - GyroKomp_Int; |
if ((w > 0) && (w < 180)) |
{ |
++GyroKomp_Int; |
} |
else if ((w > 0) && (w >= 180)) |
{ |
--GyroKomp_Int; |
} |
else if ((w < 0) && (w >= -180)) |
{ |
--GyroKomp_Int; |
} |
else if ((w < 0) && (w < -180)) |
{ |
++GyroKomp_Int; |
} |
if (GyroKomp_Int < 0) GyroKomp_Int = GyroKomp_Int + 360; |
GyroKomp_Int = (GyroKomp_Int%360) * GYROKOMP_INC_GRAD_DEFAULT; // An Magnetkompasswert annaehern |
} |
} |
else magkompass_ok = 0; |
} |
// Salvo End ************************* |
|
// Salvo 6.10.2007 |
// GPS Home aktivieren wenn Knueppel in Ruhelage und Hoehenschalter aktiviert ist |
//GPS Hold Aktiveren wenn Knueppel in Ruhelage sind |
if ((EE_Parameter.GlobalConfig & CFG_GPS_AKTIV) && (abs(StickRoll) < GPS_STICK_HOLDOFF) && (abs(StickNick) < GPS_STICK_HOLDOFF) && (gps_alive_cnt > 0)) |
{ |
if (Parameter_MaxHoehe > 200) |
{ |
if ( gps_cmd == GPS_CMD_REQ_HOLD) gps_cmd = GPS_CMD_STOP; // erst mal stoppen, denn altes Kommando wurde noch nicht beendet |
else gps_cmd = GPS_CMD_REQ_HOME; |
n = GPS_CRTL(gps_cmd); |
} |
else |
{ |
if ( gps_cmd == GPS_CMD_REQ_HOME) gps_cmd = GPS_CMD_STOP; // erst mal stoppen, denn altes Kommando wurde noch nicht beendet |
else gps_cmd = GPS_CMD_REQ_HOLD; |
n= GPS_CRTL(gps_cmd); |
} |
} |
else (n= GPS_CRTL(GPS_CMD_STOP)); //GPS Lageregelung beenden |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Kompass |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
if(KompassValue && (EE_Parameter.GlobalConfig & CFG_KOMPASS_AKTIV) && (Kompass_present > 0)) |
{ |
if(v > w) w = v; // grösste Neigung ermitteln |
|
// Salvo 13.9.2007 Nur wenn Magnetkompass ordentliche Werte liefert |
if ((magkompass_ok > 0) && NeueKompassRichtungMerken) |
{ |
KompassStartwert = KompassValue; |
NeueKompassRichtungMerken = 0; |
} |
// Salvo 13.9.2007 |
w=0; |
// Salvo End |
w = (w * Parameter_KompassWirkung) / 64; // auf die Wirkung normieren |
w = Parameter_KompassWirkung - w; // Wirkung ggf drosseln |
if(w > 0) |
{ |
// Salvo Kompasssteuerung ********************** |
if (magkompass_ok > 0) Mess_Integral_Gier += (KompassRichtung * w) / 32; // nach Kompass ausrichten |
// Salvo End |
} |
|
} |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
|
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Debugwerte zuordnen |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
if(!TimerWerteausgabe--) |
{ |
TimerWerteausgabe = 24; |
DebugOut.Analog[0] = IntegralNick / EE_Parameter.GyroAccFaktor; |
DebugOut.Analog[1] = IntegralRoll / EE_Parameter.GyroAccFaktor; |
DebugOut.Analog[2] = Mittelwert_AccNick; |
DebugOut.Analog[3] = Mittelwert_AccRoll; |
DebugOut.Analog[4] = MesswertGier; |
DebugOut.Analog[5] = HoehenWert; |
DebugOut.Analog[6] =(Mess_Integral_Hoch / 512); |
DebugOut.Analog[8] = KompassValue; |
DebugOut.Analog[9] = GyroKomp_Int/GYROKOMP_INC_GRAD_DEFAULT; |
|
// Diverse parameter Debugging |
DebugOut.Analog[16] = dataset_cnt; |
DebugOut.Analog[17] = UBat; |
DebugOut.Analog[18] = MesswertNick; |
DebugOut.Analog[19] = MesswertRoll; |
DebugOut.Analog[20] = MesswertGier; |
DebugOut.Analog[21] = StickNick; |
DebugOut.Analog[22] = StickRoll; |
DebugOut.Analog[23] = StickGier; |
|
|
// GPS Debugging |
DebugOut.Analog[26] = gps_rel_act_position.utm_east; |
DebugOut.Analog[27] = gps_rel_act_position.utm_north; |
DebugOut.Analog[28] = gps_rel_act_position.utm_alt; |
DebugOut.Analog[29] = gps_sub_state+(20*gps_cmd); |
|
/* DebugOut.Analog[16] = motor_rx[0]; |
DebugOut.Analog[17] = motor_rx[1]; |
DebugOut.Analog[18] = motor_rx[2]; |
DebugOut.Analog[19] = motor_rx[3]; |
DebugOut.Analog[20] = motor_rx[0] + motor_rx[1] + motor_rx[2] + motor_rx[3]; |
DebugOut.Analog[20] /= 14; |
DebugOut.Analog[21] = motor_rx[4]; |
DebugOut.Analog[22] = motor_rx[5]; |
DebugOut.Analog[23] = motor_rx[6]; |
DebugOut.Analog[24] = motor_rx[7]; |
DebugOut.Analog[25] = motor_rx[4] + motor_rx[5] + motor_rx[6] + motor_rx[7]; |
*/ |
// DebugOut.Analog[9] = MesswertNick; |
// DebugOut.Analog[9] = SollHoehe; |
// DebugOut.Analog[10] = Mess_Integral_Gier / 128; |
// DebugOut.Analog[11] = KompassStartwert; |
// DebugOut.Analog[10] = Parameter_Gyro_I; |
// DebugOut.Analog[10] = EE_Parameter.Gyro_I; |
// DebugOut.Analog[9] = KompassRichtung; |
// DebugOut.Analog[10] = GasMischanteil; |
// DebugOut.Analog[3] = HoeheD * 32; |
// DebugOut.Analog[4] = hoehenregler; |
} |
|
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Drehgeschwindigkeit und -winkel zu einem Istwert zusammenfassen |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
if(Looping_Nick) MesswertNick = MesswertNick * GyroFaktor; |
else MesswertNick = IntegralNick * IntegralFaktor + MesswertNick * GyroFaktor; |
if(Looping_Roll) MesswertRoll = MesswertRoll * GyroFaktor; |
else MesswertRoll = IntegralRoll * IntegralFaktor + MesswertRoll * GyroFaktor; |
// MesswertGier = MesswertGier * (GyroFaktor/2) + Integral_Gier * IntegralFaktor; |
MesswertGier = MesswertGier * (GyroFaktor) + Integral_Gier * IntegralFaktor/2; |
|
// Maximalwerte abfangen |
#define MAX_SENSOR 2048 |
if(MesswertNick > MAX_SENSOR) MesswertNick = MAX_SENSOR; |
if(MesswertNick < -MAX_SENSOR) MesswertNick = -MAX_SENSOR; |
if(MesswertRoll > MAX_SENSOR) MesswertRoll = MAX_SENSOR; |
if(MesswertRoll < -MAX_SENSOR) MesswertRoll = -MAX_SENSOR; |
if(MesswertGier > MAX_SENSOR) MesswertGier = MAX_SENSOR; |
if(MesswertGier < -MAX_SENSOR) MesswertGier = -MAX_SENSOR; |
|
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Höhenregelung |
// Die Höhenregelung schwächt lediglich das Gas ab, erhöht es allerdings nicht |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
//OCR0B = 180 - (Poti1 + 120) / 4; |
//DruckOffsetSetting = OCR0B; |
if((EE_Parameter.GlobalConfig & CFG_HOEHENREGELUNG)) // Höhenregelung |
{ |
int tmp_int; |
if(EE_Parameter.GlobalConfig & CFG_HOEHEN_SCHALTER) // Regler wird über Schalter gesteuert |
{ |
if(Parameter_MaxHoehe < 50) |
{ |
SollHoehe = HoehenWert - 20; // Parameter_MaxHoehe ist der PPM-Wert des Schalters |
HoehenReglerAktiv = 0; |
} |
else |
HoehenReglerAktiv = 1; |
} |
else |
{ |
SollHoehe = Parameter_MaxHoehe * EE_Parameter.Hoehe_Verstaerkung - 20; |
HoehenReglerAktiv = 1; |
} |
|
if(Notlandung) SollHoehe = 0; |
h = HoehenWert; |
if((h > SollHoehe) && HoehenReglerAktiv) // zu hoch --> drosseln |
{ h = ((h - SollHoehe) * (int) Parameter_Hoehe_P) / 16; // Differenz bestimmen --> P-Anteil |
h = GasMischanteil - h; // vom Gas abziehen |
h -= (HoeheD * Parameter_Luftdruck_D)/8; // D-Anteil |
tmp_int = ((Mess_Integral_Hoch / 512) * (signed long) Parameter_Hoehe_ACC_Wirkung) / 32; |
if(tmp_int > 50) tmp_int = 50; |
else if(tmp_int < -50) tmp_int = -50; |
h -= tmp_int; |
hoehenregler = (hoehenregler*15 + h) / 16; |
if(hoehenregler < EE_Parameter.Hoehe_MinGas) // nicht unter MIN |
{ |
if(GasMischanteil >= EE_Parameter.Hoehe_MinGas) hoehenregler = EE_Parameter.Hoehe_MinGas; |
if(GasMischanteil < EE_Parameter.Hoehe_MinGas) hoehenregler = GasMischanteil; |
} |
if(hoehenregler > GasMischanteil) hoehenregler = GasMischanteil; // nicht mehr als Gas |
GasMischanteil = hoehenregler; |
} |
} |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Mischer und PI-Regler |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
DebugOut.Analog[7] = GasMischanteil; |
|
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Gier-Anteil |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
#define MUL_G 1.0 |
GierMischanteil = MesswertGier - sollGier; // Regler für Gier |
//GierMischanteil = 0; |
if(GierMischanteil > (MUL_G * GasMischanteil)) GierMischanteil = MUL_G * GasMischanteil; |
if(GierMischanteil < -(MUL_G * GasMischanteil)) GierMischanteil = -(MUL_G * GasMischanteil); |
if(GierMischanteil > 100) GierMischanteil = 100; |
if(GierMischanteil < -100) GierMischanteil = -100; |
|
if(GasMischanteil < 20) GierMischanteil = 0; |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Nick-Achse |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
DiffNick = Kp * (MesswertNick - (StickNick - GPS_Nick)); // Differenz bestimmen |
SummeNick += DiffNick; // I-Anteil |
if(SummeNick > 0) SummeNick-= (abs(SummeNick)/256 + 1); else SummeNick += abs(SummeNick)/256 + 1; |
if(SummeNick > 16000) SummeNick = 16000; |
if(SummeNick < -16000) SummeNick = -16000; |
pd_ergebnis = DiffNick + Ki * SummeNick; // PI-Regler für Nick |
// Motor Vorn |
#define MUL 2 |
if(pd_ergebnis > MUL * (GasMischanteil + abs(GierMischanteil))) pd_ergebnis = MUL * (GasMischanteil + abs(GierMischanteil)); |
if(pd_ergebnis < -MUL * (GasMischanteil + abs(GierMischanteil))) pd_ergebnis = -MUL * (GasMischanteil + abs(GierMischanteil)); |
|
motorwert = GasMischanteil + pd_ergebnis + GierMischanteil; // Mischer |
if ((motorwert < 0)) motorwert = 0; |
else if(motorwert > MAX_GAS) motorwert = MAX_GAS; |
if (motorwert < MIN_GAS) motorwert = MIN_GAS; |
Motor_Vorne = motorwert; |
// Motor Heck |
motorwert = GasMischanteil - pd_ergebnis + GierMischanteil; |
if ((motorwert < 0)) motorwert = 0; |
else if(motorwert > MAX_GAS) motorwert = MAX_GAS; |
if (motorwert < MIN_GAS) motorwert = MIN_GAS; |
Motor_Hinten = motorwert; |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Roll-Achse |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
DiffRoll = Kp * (MesswertRoll - (StickRoll - GPS_Roll)); // Differenz bestimmen |
SummeRoll += DiffRoll; // I-Anteil |
if(SummeRoll > 0) SummeRoll-= (abs(SummeRoll)/256 + 1); else SummeRoll += abs(SummeRoll)/256 + 1; |
if(SummeRoll > 16000) SummeRoll = 16000; |
if(SummeRoll < -16000) SummeRoll = -16000; |
pd_ergebnis = DiffRoll + Ki * SummeRoll; // PI-Regler für Roll |
if(pd_ergebnis > MUL * (GasMischanteil + abs(GierMischanteil))) pd_ergebnis = MUL * (GasMischanteil + abs(GierMischanteil)); |
if(pd_ergebnis < -MUL * (GasMischanteil + abs(GierMischanteil))) pd_ergebnis = -MUL * (GasMischanteil + abs(GierMischanteil)); |
// Motor Links |
motorwert = GasMischanteil + pd_ergebnis - GierMischanteil; |
if ((motorwert < 0)) motorwert = 0; |
else if(motorwert > MAX_GAS) motorwert = MAX_GAS; |
if (motorwert < MIN_GAS) motorwert = MIN_GAS; |
Motor_Links = motorwert; |
// Motor Rechts |
motorwert = GasMischanteil - pd_ergebnis - GierMischanteil; |
if ((motorwert < 0)) motorwert = 0; |
else if(motorwert > MAX_GAS) motorwert = MAX_GAS; |
if (motorwert < MIN_GAS) motorwert = MIN_GAS; |
Motor_Rechts = motorwert; |
// +++++++++++++++++++++++++++++++++++++++++++++++ |
} |
|