56,122 → 56,129 |
#include "rc.h" |
#include "eeprom.h" |
|
typedef enum |
{ |
GPS_FLIGHT_MODE_UNDEF, |
GPS_FLIGHT_MODE_FREE, |
GPS_FLIGHT_MODE_AID, |
GPS_FLIGHT_MODE_HOME, |
} FlightMode_t; |
typedef enum { |
GPS_FLIGHT_MODE_UNDEF, |
GPS_FLIGHT_MODE_FREE, |
GPS_FLIGHT_MODE_AID, |
GPS_FLIGHT_MODE_HOME, |
} FlightMode_t; |
|
#define GPS_POSINTEGRAL_LIMIT 32000 |
#define GPS_STICK_LIMIT 45 // limit of gps stick control to avoid critical flight attitudes |
#define GPS_P_LIMIT 25 |
|
|
typedef struct |
{ |
int32_t Longitude; |
int32_t Latitude; |
int32_t Altitude; |
Status_t Status; |
typedef struct { |
int32_t Longitude; |
int32_t Latitude; |
int32_t Altitude; |
Status_t Status; |
} GPS_Pos_t; |
|
// GPS coordinates for hold position |
GPS_Pos_t HoldPosition = {0,0,0,INVALID}; |
GPS_Pos_t HoldPosition = { 0, 0, 0, INVALID }; |
// GPS coordinates for home position |
GPS_Pos_t HomePosition = {0,0,0,INVALID}; |
GPS_Pos_t HomePosition = { 0, 0, 0, INVALID }; |
// the current flight mode |
FlightMode_t FlightMode = GPS_FLIGHT_MODE_UNDEF; |
|
|
// --------------------------------------------------------------------------------- |
void GPS_UpdateParameter(void) { |
static FlightMode_t FlightModeOld = GPS_FLIGHT_MODE_UNDEF; |
|
if((RC_Quality < 100) || (MKFlags & MKFLAG_EMERGENCY_LANDING)) { |
FlightMode = GPS_FLIGHT_MODE_FREE; |
} else { |
if (dynamicParams.NaviGpsModeControl < 50) FlightMode = GPS_FLIGHT_MODE_AID; |
else if(dynamicParams.NaviGpsModeControl < 180) FlightMode = GPS_FLIGHT_MODE_FREE; |
else FlightMode = GPS_FLIGHT_MODE_HOME; |
} |
static FlightMode_t FlightModeOld = GPS_FLIGHT_MODE_UNDEF; |
|
if (FlightMode != FlightModeOld) { |
BeepTime = 100; |
} |
FlightModeOld = FlightMode; |
if ((RC_Quality < 100) || (MKFlags & MKFLAG_EMERGENCY_LANDING)) { |
FlightMode = GPS_FLIGHT_MODE_FREE; |
} else { |
if (dynamicParams.NaviGpsModeControl < 50) |
FlightMode = GPS_FLIGHT_MODE_AID; |
else if (dynamicParams.NaviGpsModeControl < 180) |
FlightMode = GPS_FLIGHT_MODE_FREE; |
else |
FlightMode = GPS_FLIGHT_MODE_HOME; |
} |
|
if (FlightMode != FlightModeOld) { |
BeepTime = 100; |
} |
FlightModeOld = FlightMode; |
} |
|
// --------------------------------------------------------------------------------- |
// This function defines a good GPS signal condition |
uint8_t GPS_IsSignalOK(void) { |
static uint8_t GPSFix = 0; |
if( (GPSInfo.status != INVALID) && (GPSInfo.satfix == SATFIX_3D) && (GPSInfo.flags & FLAG_GPSFIXOK) && ((GPSInfo.satnum >= staticParams.NaviGpsMinSat) || GPSFix)) { |
GPSFix = 1; |
return 1; |
} |
else return (0); |
static uint8_t GPSFix = 0; |
if ((GPSInfo.status != INVALID) && (GPSInfo.satfix == SATFIX_3D) |
&& (GPSInfo.flags & FLAG_GPSFIXOK) && ((GPSInfo.satnum |
>= staticParams.NaviGpsMinSat) || GPSFix)) { |
GPSFix = 1; |
return 1; |
} else |
return (0); |
} |
|
// --------------------------------------------------------------------------------- |
// rescale xy-vector length to limit |
uint8_t GPS_LimitXY(int32_t *x, int32_t *y, int32_t limit) { |
uint8_t retval = 0; |
int32_t len; |
len = (int32_t)c_sqrt(*x * *x + *y * *y); |
if (len > limit) { |
// normalize control vector components to the limit |
*x = (*x * limit) / len; |
*y = (*y * limit) / len; |
retval = 1; |
} |
return(retval); |
uint8_t retval = 0; |
int32_t len; |
len = (int32_t) c_sqrt(*x * *x + *y * *y); |
if (len > limit) { |
// normalize control vector components to the limit |
*x = (*x * limit) / len; |
*y = (*y * limit) / len; |
retval = 1; |
} |
return (retval); |
} |
|
// checks nick and roll sticks for manual control |
uint8_t GPS_IsManualControlled(void) { |
if ((abs(PPM_in[staticParams.ChannelAssignment[CH_NICK]]) < staticParams.NaviStickThreshold) && (abs(PPM_in[staticParams.ChannelAssignment[CH_ROLL]]) < staticParams.NaviStickThreshold)) return 0; |
else return 1; |
if ((abs(PPM_in[staticParams.ChannelAssignment[CH_NICK]]) |
< staticParams.NaviStickThreshold) |
&& (abs(PPM_in[staticParams.ChannelAssignment[CH_ROLL]]) |
< staticParams.NaviStickThreshold)) |
return 0; |
else |
return 1; |
} |
|
// set given position to current gps position |
uint8_t GPS_SetCurrPosition(GPS_Pos_t * pGPSPos) { |
uint8_t retval = 0; |
if(pGPSPos == NULL) return(retval); // bad pointer |
uint8_t retval = 0; |
if (pGPSPos == NULL) |
return (retval); // bad pointer |
|
if(GPS_IsSignalOK()) { // is GPS signal condition is fine |
pGPSPos->Longitude = GPSInfo.longitude; |
pGPSPos->Latitude = GPSInfo.latitude; |
pGPSPos->Altitude = GPSInfo.altitude; |
pGPSPos->Status = NEWDATA; |
retval = 1; |
} else { // bad GPS signal condition |
pGPSPos->Status = INVALID; |
retval = 0; |
} |
return(retval); |
if (GPS_IsSignalOK()) { // is GPS signal condition is fine |
pGPSPos->Longitude = GPSInfo.longitude; |
pGPSPos->Latitude = GPSInfo.latitude; |
pGPSPos->Altitude = GPSInfo.altitude; |
pGPSPos->Status = NEWDATA; |
retval = 1; |
} else { // bad GPS signal condition |
pGPSPos->Status = INVALID; |
retval = 0; |
} |
return (retval); |
} |
|
// clear position |
uint8_t GPS_ClearPosition(GPS_Pos_t * pGPSPos) { |
uint8_t retval = 0; |
if(pGPSPos == NULL) |
return retval; // bad pointer |
else { |
pGPSPos->Longitude = 0; |
pGPSPos->Latitude = 0; |
pGPSPos->Altitude = 0; |
pGPSPos->Status = INVALID; |
retval = 1; |
} |
return (retval); |
uint8_t retval = 0; |
if (pGPSPos == NULL) |
return retval; // bad pointer |
else { |
pGPSPos->Longitude = 0; |
pGPSPos->Latitude = 0; |
pGPSPos->Altitude = 0; |
pGPSPos->Status = INVALID; |
retval = 1; |
} |
return (retval); |
} |
|
// disable GPS control sticks |
void GPS_Neutral(void) { |
GPSStickNick = 0; |
GPSStickRoll = 0; |
GPSStickNick = 0; |
GPSStickRoll = 0; |
} |
|
// calculates the GPS control stick values from the deviation to target position |
178,255 → 185,241 |
// if the pointer to the target positin is NULL or is the target position invalid |
// then the P part of the controller is deactivated. |
void GPS_PIDController(GPS_Pos_t *pTargetPos) { |
static int32_t PID_Nick, PID_Roll; |
int32_t coscompass, sincompass; |
int32_t GPSPosDev_North, GPSPosDev_East; // Position deviation in cm |
int32_t P_North = 0, D_North = 0, P_East = 0, D_East = 0, I_North = 0, I_East = 0; |
int32_t PID_North = 0, PID_East = 0; |
static int32_t cos_target_latitude = 1; |
static int32_t GPSPosDevIntegral_North = 0, GPSPosDevIntegral_East = 0; |
static GPS_Pos_t *pLastTargetPos = 0; |
static int32_t PID_Nick, PID_Roll; |
int32_t coscompass, sincompass; |
int32_t GPSPosDev_North, GPSPosDev_East; // Position deviation in cm |
int32_t P_North = 0, D_North = 0, P_East = 0, D_East = 0, I_North = 0, |
I_East = 0; |
int32_t PID_North = 0, PID_East = 0; |
static int32_t cos_target_latitude = 1; |
static int32_t GPSPosDevIntegral_North = 0, GPSPosDevIntegral_East = 0; |
static GPS_Pos_t *pLastTargetPos = 0; |
|
// if GPS data and Compass are ok |
if( GPS_IsSignalOK() && (CompassHeading >= 0)) { |
if(pTargetPos != NULL) // if there is a target position |
{ |
if(pTargetPos->Status != INVALID) // and the position data are valid |
{ |
// if the target data are updated or the target pointer has changed |
if ((pTargetPos->Status != PROCESSED) || (pTargetPos != pLastTargetPos) ) |
{ |
// if GPS data and Compass are ok |
if (GPS_IsSignalOK() && (CompassHeading >= 0)) { |
if (pTargetPos != NULL) // if there is a target position |
{ |
if (pTargetPos->Status != INVALID) // and the position data are valid |
{ |
// if the target data are updated or the target pointer has changed |
if ((pTargetPos->Status != PROCESSED) || (pTargetPos |
!= pLastTargetPos)) { |
// reset error integral |
GPSPosDevIntegral_North = 0; |
GPSPosDevIntegral_East = 0; |
// recalculate latitude projection |
cos_target_latitude = (int32_t) c_cos_8192( |
(int16_t) (pTargetPos->Latitude / 10000000L)); |
// remember last target pointer |
pLastTargetPos = pTargetPos; |
// mark data as processed |
pTargetPos->Status = PROCESSED; |
} |
// calculate position deviation from latitude and longitude differences |
GPSPosDev_North = (GPSInfo.latitude - pTargetPos->Latitude); // to calculate real cm we would need *111/100 additionally |
GPSPosDev_East = (GPSInfo.longitude - pTargetPos->Longitude); // to calculate real cm we would need *111/100 additionally |
// calculate latitude projection |
GPSPosDev_East *= cos_target_latitude; |
GPSPosDev_East /= 8192; |
} else {// no valid target position available |
// reset error |
GPSPosDev_North = 0; |
GPSPosDev_East = 0; |
// reset error integral |
GPSPosDevIntegral_North = 0; |
GPSPosDevIntegral_East = 0; |
} |
} else { // no target position available |
// reset error |
GPSPosDev_North = 0; |
GPSPosDev_East = 0; |
// reset error integral |
GPSPosDevIntegral_North = 0; |
GPSPosDevIntegral_East = 0; |
} |
|
//Calculate PID-components of the controller |
|
// D-Part |
D_North = ((int32_t) dynamicParams.NaviGpsD * GPSInfo.velnorth) / 512; |
D_East = ((int32_t) dynamicParams.NaviGpsD * GPSInfo.veleast) / 512; |
|
// P-Part |
P_North = ((int32_t) dynamicParams.NaviGpsP * GPSPosDev_North) / 2048; |
P_East = ((int32_t) dynamicParams.NaviGpsP * GPSPosDev_East) / 2048; |
|
// I-Part |
I_North = ((int32_t) dynamicParams.NaviGpsI * GPSPosDevIntegral_North) |
/ 8192; |
I_East = ((int32_t) dynamicParams.NaviGpsI * GPSPosDevIntegral_East) |
/ 8192; |
|
// combine P & I |
PID_North = P_North + I_North; |
PID_East = P_East + I_East; |
if (!GPS_LimitXY(&PID_North, &PID_East, GPS_P_LIMIT)) { |
GPSPosDevIntegral_North += GPSPosDev_North / 16; |
GPSPosDevIntegral_East += GPSPosDev_East / 16; |
GPS_LimitXY(&GPSPosDevIntegral_North, &GPSPosDevIntegral_East, |
GPS_POSINTEGRAL_LIMIT); |
} |
|
// combine PI- and D-Part |
PID_North += D_North; |
PID_East += D_East; |
|
// scale combination with gain. |
PID_North = (PID_North * (int32_t) dynamicParams.NaviGpsGain) / 100; |
PID_East = (PID_East * (int32_t) dynamicParams.NaviGpsGain) / 100; |
|
// GPS to nick and roll settings |
// A positive nick angle moves head downwards (flying forward). |
// A positive roll angle tilts left side downwards (flying left). |
// If compass heading is 0 the head of the copter is in north direction. |
// A positive nick angle will fly to north and a positive roll angle will fly to west. |
// In case of a positive north deviation/velocity the |
// copter should fly to south (negative nick). |
// In case of a positive east position deviation and a positive east velocity the |
// copter should fly to west (positive roll). |
// The influence of the GPSStickNick and GPSStickRoll variable is contrarily to the stick values |
// in the flight.c. Therefore a positive north deviation/velocity should result in a positive |
// GPSStickNick and a positive east deviation/velocity should result in a negative GPSStickRoll. |
|
coscompass = (int32_t) c_cos_8192(YawGyroHeading / GYRO_DEG_FACTOR); |
sincompass = (int32_t) c_sin_8192(YawGyroHeading / GYRO_DEG_FACTOR); |
PID_Nick = (coscompass * PID_North + sincompass * PID_East) / 8192; |
PID_Roll = (sincompass * PID_North - coscompass * PID_East) / 8192; |
|
// limit resulting GPS control vector |
GPS_LimitXY(&PID_Nick, &PID_Roll, GPS_STICK_LIMIT); |
|
GPSStickNick = (int16_t) PID_Nick; |
GPSStickRoll = (int16_t) PID_Roll; |
} else { // invalid GPS data or bad compass reading |
GPS_Neutral(); // do nothing |
// reset error integral |
GPSPosDevIntegral_North = 0; |
GPSPosDevIntegral_East = 0; |
// recalculate latitude projection |
cos_target_latitude = (int32_t)c_cos_8192((int16_t)(pTargetPos->Latitude/10000000L)); |
// remember last target pointer |
pLastTargetPos = pTargetPos; |
// mark data as processed |
pTargetPos->Status = PROCESSED; |
} |
// calculate position deviation from latitude and longitude differences |
GPSPosDev_North = (GPSInfo.latitude - pTargetPos->Latitude); // to calculate real cm we would need *111/100 additionally |
GPSPosDev_East = (GPSInfo.longitude - pTargetPos->Longitude); // to calculate real cm we would need *111/100 additionally |
// calculate latitude projection |
GPSPosDev_East *= cos_target_latitude; |
GPSPosDev_East /= 8192; |
} |
else // no valid target position available |
{ |
// reset error |
GPSPosDev_North = 0; |
GPSPosDev_East = 0; |
// reset error integral |
GPSPosDevIntegral_North = 0; |
GPSPosDevIntegral_East = 0; |
} |
} |
else // no target position available |
{ |
// reset error |
GPSPosDev_North = 0; |
GPSPosDev_East = 0; |
// reset error integral |
GPSPosDevIntegral_North = 0; |
GPSPosDevIntegral_East = 0; |
} |
|
//Calculate PID-components of the controller |
|
// D-Part |
D_North = ((int32_t)dynamicParams.NaviGpsD * GPSInfo.velnorth)/512; |
D_East = ((int32_t)dynamicParams.NaviGpsD * GPSInfo.veleast)/512; |
|
// P-Part |
P_North = ((int32_t)dynamicParams.NaviGpsP * GPSPosDev_North)/2048; |
P_East = ((int32_t)dynamicParams.NaviGpsP * GPSPosDev_East)/2048; |
|
// I-Part |
I_North = ((int32_t)dynamicParams.NaviGpsI * GPSPosDevIntegral_North)/8192; |
I_East = ((int32_t)dynamicParams.NaviGpsI * GPSPosDevIntegral_East)/8192; |
|
// combine P & I |
PID_North = P_North + I_North; |
PID_East = P_East + I_East; |
if(!GPS_LimitXY(&PID_North, &PID_East, GPS_P_LIMIT)) |
{ |
GPSPosDevIntegral_North += GPSPosDev_North/16; |
GPSPosDevIntegral_East += GPSPosDev_East/16; |
GPS_LimitXY(&GPSPosDevIntegral_North, &GPSPosDevIntegral_East, GPS_POSINTEGRAL_LIMIT); |
} |
|
// combine PI- and D-Part |
PID_North += D_North; |
PID_East += D_East; |
|
// scale combination with gain. |
PID_North = (PID_North * (int32_t)dynamicParams.NaviGpsGain) / 100; |
PID_East = (PID_East * (int32_t)dynamicParams.NaviGpsGain) / 100; |
|
// GPS to nick and roll settings |
// A positive nick angle moves head downwards (flying forward). |
// A positive roll angle tilts left side downwards (flying left). |
// If compass heading is 0 the head of the copter is in north direction. |
// A positive nick angle will fly to north and a positive roll angle will fly to west. |
// In case of a positive north deviation/velocity the |
// copter should fly to south (negative nick). |
// In case of a positive east position deviation and a positive east velocity the |
// copter should fly to west (positive roll). |
// The influence of the GPSStickNick and GPSStickRoll variable is contrarily to the stick values |
// in the flight.c. Therefore a positive north deviation/velocity should result in a positive |
// GPSStickNick and a positive east deviation/velocity should result in a negative GPSStickRoll. |
|
coscompass = (int32_t)c_cos_8192(YawGyroHeading / GYRO_DEG_FACTOR); |
sincompass = (int32_t)c_sin_8192(YawGyroHeading / GYRO_DEG_FACTOR); |
PID_Nick = (coscompass * PID_North + sincompass * PID_East) / 8192; |
PID_Roll = (sincompass * PID_North - coscompass * PID_East) / 8192; |
|
// limit resulting GPS control vector |
GPS_LimitXY(&PID_Nick, &PID_Roll, GPS_STICK_LIMIT); |
|
GPSStickNick = (int16_t)PID_Nick; |
GPSStickRoll = (int16_t)PID_Roll; |
} |
else // invalid GPS data or bad compass reading |
{ |
GPS_Neutral(); // do nothing |
// reset error integral |
GPSPosDevIntegral_North = 0; |
GPSPosDevIntegral_East = 0; |
} |
} |
} |
|
void GPS_Main(void) { |
static uint8_t GPS_P_Delay = 0; |
static uint16_t beep_rythm = 0; |
static uint8_t GPS_P_Delay = 0; |
static uint16_t beep_rythm = 0; |
|
GPS_UpdateParameter(); |
GPS_UpdateParameter(); |
|
// store home position if start of flight flag is set |
if(MKFlags & MKFLAG_CALIBRATE) { |
if(GPS_SetCurrPosition(&HomePosition)) BeepTime = 700; |
} |
|
switch(GPSInfo.status) { |
case INVALID: // invalid gps data |
GPS_Neutral(); |
if(FlightMode != GPS_FLIGHT_MODE_FREE) { |
BeepTime = 100; // beep if signal is neccesary |
} |
break; |
case PROCESSED: // if gps data are already processed do nothing |
// downcount timeout |
if(GPSTimeout) GPSTimeout--; |
// if no new data arrived within timeout set current data invalid |
// and therefore disable GPS |
else |
{ |
GPS_Neutral(); |
GPSInfo.status = INVALID; |
} |
break; |
case NEWDATA: // new valid data from gps device |
// if the gps data quality is good |
beep_rythm++; |
|
if (GPS_IsSignalOK()) |
{ |
switch(FlightMode) // check what's to do |
{ |
case GPS_FLIGHT_MODE_FREE: |
// update hold position to current gps position |
GPS_SetCurrPosition(&HoldPosition); // can get invalid if gps signal is bad |
// disable gps control |
GPS_Neutral(); |
break; |
|
case GPS_FLIGHT_MODE_AID: |
if(HoldPosition.Status != INVALID) |
{ |
if( GPS_IsManualControlled() ) // MK controlled by user |
{ |
// update hold point to current gps position |
GPS_SetCurrPosition(&HoldPosition); |
// disable gps control |
GPS_Neutral(); |
GPS_P_Delay = 0; |
} |
else // GPS control active |
{ |
if(GPS_P_Delay < 7) |
{ // delayed activation of P-Part for 8 cycles (8*0.25s = 2s) |
GPS_P_Delay++; |
GPS_SetCurrPosition(&HoldPosition); // update hold point to current gps position |
GPS_PIDController(NULL); // activates only the D-Part |
} |
else GPS_PIDController(&HoldPosition);// activates the P&D-Part |
} |
} |
else // invalid Hold Position |
{ // try to catch a valid hold position from gps data input |
GPS_SetCurrPosition(&HoldPosition); |
// store home position if start of flight flag is set |
if (MKFlags & MKFLAG_CALIBRATE) { |
if (GPS_SetCurrPosition(&HomePosition)) |
BeepTime = 700; |
} |
|
switch (GPSInfo.status) { |
case INVALID: // invalid gps data |
GPS_Neutral(); |
} |
break; |
|
case GPS_FLIGHT_MODE_HOME: |
if(HomePosition.Status != INVALID) |
{ |
// update hold point to current gps position |
// to avoid a flight back if home comming is deactivated |
GPS_SetCurrPosition(&HoldPosition); |
if( GPS_IsManualControlled() ) // MK controlled by user |
{ |
GPS_Neutral(); |
} |
else // GPS control active |
{ |
GPS_PIDController(&HomePosition); |
} |
} |
else // bad home position |
{ |
BeepTime = 50; // signal invalid home position |
// try to hold at least the position as a fallback option |
|
if (HoldPosition.Status != INVALID) |
{ |
if( GPS_IsManualControlled() ) // MK controlled by user |
{ |
if (FlightMode != GPS_FLIGHT_MODE_FREE) { |
BeepTime = 100; // beep if signal is neccesary |
} |
break; |
case PROCESSED: // if gps data are already processed do nothing |
// downcount timeout |
if (GPSTimeout) |
GPSTimeout--; |
// if no new data arrived within timeout set current data invalid |
// and therefore disable GPS |
else { |
GPS_Neutral(); |
} |
else // GPS control active |
{ |
GPS_PIDController(&HoldPosition); |
} |
} |
else |
{ // try to catch a valid hold position |
GPS_SetCurrPosition(&HoldPosition); |
GPS_Neutral(); |
} |
} |
break; // eof TSK_HOME |
default: // unhandled task |
GPS_Neutral(); |
break; // eof default |
} // eof switch GPS_Task |
} // eof gps data quality is good |
else // gps data quality is bad |
{ // disable gps control |
GPS_Neutral(); |
if(FlightMode != GPS_FLIGHT_MODE_FREE) |
{ |
// beep if signal is not sufficient |
if(!(GPSInfo.flags & FLAG_GPSFIXOK) && !(beep_rythm % 5)) BeepTime = 100; |
else if (GPSInfo.satnum < staticParams.NaviGpsMinSat && !(beep_rythm % 5)) BeepTime = 10; |
} |
} |
// set current data as processed to avoid further calculations on the same gps data |
GPSInfo.status = PROCESSED; |
break; |
} // eof GPSInfo.status |
GPSInfo.status = INVALID; |
} |
break; |
case NEWDATA: // new valid data from gps device |
// if the gps data quality is good |
beep_rythm++; |
if (GPS_IsSignalOK()) { |
switch (FlightMode) { // check what's to do |
case GPS_FLIGHT_MODE_FREE: |
// update hold position to current gps position |
GPS_SetCurrPosition(&HoldPosition); // can get invalid if gps signal is bad |
// disable gps control |
GPS_Neutral(); |
break; |
|
case GPS_FLIGHT_MODE_AID: |
if (HoldPosition.Status != INVALID) { |
if (GPS_IsManualControlled()) { // MK controlled by user |
// update hold point to current gps position |
GPS_SetCurrPosition(&HoldPosition); |
// disable gps control |
GPS_Neutral(); |
GPS_P_Delay = 0; |
} else { // GPS control active |
if (GPS_P_Delay < 7) { |
// delayed activation of P-Part for 8 cycles (8*0.25s = 2s) |
GPS_P_Delay++; |
GPS_SetCurrPosition(&HoldPosition); // update hold point to current gps position |
GPS_PIDController(NULL); // activates only the D-Part |
} else |
GPS_PIDController(&HoldPosition);// activates the P&D-Part |
} |
} else // invalid Hold Position |
{ // try to catch a valid hold position from gps data input |
GPS_SetCurrPosition(&HoldPosition); |
GPS_Neutral(); |
} |
break; |
|
case GPS_FLIGHT_MODE_HOME: |
if (HomePosition.Status != INVALID) { |
// update hold point to current gps position |
// to avoid a flight back if home comming is deactivated |
GPS_SetCurrPosition(&HoldPosition); |
if (GPS_IsManualControlled()) // MK controlled by user |
{ |
GPS_Neutral(); |
} else // GPS control active |
{ |
GPS_PIDController(&HomePosition); |
} |
} else // bad home position |
{ |
BeepTime = 50; // signal invalid home position |
// try to hold at least the position as a fallback option |
|
if (HoldPosition.Status != INVALID) { |
if (GPS_IsManualControlled()) // MK controlled by user |
{ |
GPS_Neutral(); |
} else // GPS control active |
{ |
GPS_PIDController(&HoldPosition); |
} |
} else { // try to catch a valid hold position |
GPS_SetCurrPosition(&HoldPosition); |
GPS_Neutral(); |
} |
} |
break; // eof TSK_HOME |
default: // unhandled task |
GPS_Neutral(); |
break; // eof default |
} // eof switch GPS_Task |
} // eof gps data quality is good |
else // gps data quality is bad |
{ // disable gps control |
GPS_Neutral(); |
if (FlightMode != GPS_FLIGHT_MODE_FREE) { |
// beep if signal is not sufficient |
if (!(GPSInfo.flags & FLAG_GPSFIXOK) && !(beep_rythm % 5)) |
BeepTime = 100; |
else if (GPSInfo.satnum < staticParams.NaviGpsMinSat |
&& !(beep_rythm % 5)) |
BeepTime = 10; |
} |
} |
// set current data as processed to avoid further calculations on the same gps data |
GPSInfo.status = PROCESSED; |
break; |
} // eof GPSInfo.status |
} |
|