81,7 → 81,7 |
*/ |
// int16_t naviAccPitch = 0, naviAccRoll = 0, naviCntAcc = 0; |
|
uint8_t gyroPFactor, gyroIFactor; // the PD factors for the attitude control |
uint8_t gyroPFactor, gyroIFactor; // the PD factors for the attitude control |
uint8_t yawPFactor, yawIFactor; // the PD factors for the yaw control |
|
// Some integral weight constant... |
95,23 → 95,24 |
/* Filter for motor value smoothing (necessary???) */ |
/************************************************************************/ |
int16_t motorFilter(int16_t newvalue, int16_t oldvalue) { |
switch(dynamicParams.UserParams[5]) { |
case 0: |
return newvalue; |
case 1: |
return (oldvalue + newvalue) / 2; |
case 2: |
if(newvalue > oldvalue) |
return (1 * (int16_t)oldvalue + newvalue) / 2; //mean of old and new |
else |
return newvalue - (oldvalue - newvalue) * 1; // 2 * new - old |
case 3: |
if(newvalue < oldvalue) |
return (1 * (int16_t)oldvalue + newvalue) / 2; //mean of old and new |
else |
return newvalue - (oldvalue - newvalue) * 1; // 2 * new - old |
default: return newvalue; |
} |
switch (dynamicParams.UserParams[5]) { |
case 0: |
return newvalue; |
case 1: |
return (oldvalue + newvalue) / 2; |
case 2: |
if (newvalue > oldvalue) |
return (1 * (int16_t) oldvalue + newvalue) / 2; //mean of old and new |
else |
return newvalue - (oldvalue - newvalue) * 1; // 2 * new - old |
case 3: |
if (newvalue < oldvalue) |
return (1 * (int16_t) oldvalue + newvalue) / 2; //mean of old and new |
else |
return newvalue - (oldvalue - newvalue) * 1; // 2 * new - old |
default: |
return newvalue; |
} |
} |
|
/************************************************************************/ |
118,345 → 119,345 |
/* Neutral Readings */ |
/************************************************************************/ |
void flight_setNeutral() { |
MKFlags |= MKFLAG_CALIBRATE; |
MKFlags |= MKFLAG_CALIBRATE; |
|
// not really used here any more. |
dynamicParams.KalmanK = -1; |
dynamicParams.KalmanMaxDrift = 0; |
dynamicParams.KalmanMaxFusion = 32; |
// not really used here any more. |
dynamicParams.KalmanK = -1; |
dynamicParams.KalmanMaxDrift = 0; |
dynamicParams.KalmanMaxFusion = 32; |
|
controlMixer_initVariables(); |
controlMixer_initVariables(); |
} |
|
void setFlightParameters(uint8_t _Ki, uint8_t _gyroPFactor, uint8_t _gyroIFactor, uint8_t _yawPFactor, uint8_t _yawIFactor) { |
Ki = 10300 / _Ki; |
gyroPFactor = _gyroPFactor; |
gyroIFactor = _gyroIFactor; |
yawPFactor = _yawPFactor; |
yawIFactor = _yawIFactor; |
void setFlightParameters(uint8_t _Ki, uint8_t _gyroPFactor, |
uint8_t _gyroIFactor, uint8_t _yawPFactor, uint8_t _yawIFactor) { |
Ki = 10300 / _Ki; |
gyroPFactor = _gyroPFactor; |
gyroIFactor = _gyroIFactor; |
yawPFactor = _yawPFactor; |
yawIFactor = _yawIFactor; |
} |
|
void setNormalFlightParameters(void) { |
setFlightParameters(dynamicParams.IFactor + 1, |
dynamicParams.GyroP + 10, |
staticParams.GlobalConfig & CFG_HEADING_HOLD ? 0 : dynamicParams.GyroI, |
dynamicParams.GyroP + 10, |
dynamicParams.UserParams[6] |
); |
setFlightParameters(dynamicParams.IFactor + 1, dynamicParams.GyroP + 10, |
staticParams.GlobalConfig & CFG_HEADING_HOLD ? 0 : dynamicParams.GyroI, |
dynamicParams.GyroP + 10, dynamicParams.UserParams[6]); |
} |
|
void setStableFlightParameters(void) { |
setFlightParameters(33, 90, 120, 90, 120); |
setFlightParameters(33, 90, 120, 90, 120); |
} |
|
|
/************************************************************************/ |
/* Main Flight Control */ |
/************************************************************************/ |
void flight_control(void) { |
int16_t tmp_int; |
// Mixer Fractions that are combined for Motor Control |
int16_t yawTerm, throttleTerm, term[2]; |
int16_t tmp_int; |
// Mixer Fractions that are combined for Motor Control |
int16_t yawTerm, throttleTerm, term[2]; |
|
// PID controller variables |
int16_t PDPart[2], PDPartYaw, PPart[2]; |
static int32_t IPart[2] = {0,0}; |
// static int32_t yawControlRate = 0; |
// PID controller variables |
int16_t PDPart[2], PDPartYaw, PPart[2]; |
static int32_t IPart[2] = { 0, 0 }; |
// static int32_t yawControlRate = 0; |
|
// Removed. Too complicated, and apparently not necessary with MEMS gyros anyway. |
// static int32_t IntegralGyroPitchError = 0, IntegralGyroRollError = 0; |
// static int32_t CorrectionPitch, CorrectionRoll; |
// Removed. Too complicated, and apparently not necessary with MEMS gyros anyway. |
// static int32_t IntegralGyroPitchError = 0, IntegralGyroRollError = 0; |
// static int32_t CorrectionPitch, CorrectionRoll; |
|
static uint16_t emergencyFlightTime; |
static int8_t debugDataTimer = 1; |
static uint16_t emergencyFlightTime; |
static int8_t debugDataTimer = 1; |
|
// High resolution motor values for smoothing of PID motor outputs |
static int16_t motorFilters[MAX_MOTORS]; |
// High resolution motor values for smoothing of PID motor outputs |
static int16_t motorFilters[MAX_MOTORS]; |
|
uint8_t i, axis; |
uint8_t i, axis; |
|
controlMixer_update(); |
controlMixer_update(); |
|
// Fire the main flight attitude calculation, including integration of angles. |
calculateFlightAttitude(); |
// Fire the main flight attitude calculation, including integration of angles. |
calculateFlightAttitude(); |
|
throttleTerm = controlThrottle; |
// This check removed. Is done on a per-motor basis, after output matrix multiplication. |
// if(throttleTerm < staticParams.MinThrottle + 10) throttleTerm = staticParams.MinThrottle + 10; |
// else if(throttleTerm > staticParams.MaxThrottle - 20) throttleTerm = (staticParams.MaxThrottle - 20); |
throttleTerm = controlThrottle; |
// This check removed. Is done on a per-motor basis, after output matrix multiplication. |
// if(throttleTerm < staticParams.MinThrottle + 10) throttleTerm = staticParams.MinThrottle + 10; |
// else if(throttleTerm > staticParams.MaxThrottle - 20) throttleTerm = (staticParams.MaxThrottle - 20); |
|
/************************************************************************/ |
/* RC-signal is bad */ |
/* This part could be abstracted, as having yet another control input */ |
/* to the control mixer: An emergency autopilot control. */ |
/************************************************************************/ |
/************************************************************************/ |
/* RC-signal is bad */ |
/* This part could be abstracted, as having yet another control input */ |
/* to the control mixer: An emergency autopilot control. */ |
/************************************************************************/ |
|
if(controlMixer_getSignalQuality() <= SIGNAL_BAD) { // the rc-frame signal is not reveived or noisy |
RED_ON; |
beepRCAlarm(); |
|
if(emergencyFlightTime) { |
// continue emergency flight |
emergencyFlightTime--; |
if(isFlying > 256) { |
// We're probably still flying. Descend slowly. |
throttleTerm = staticParams.EmergencyGas; // Set emergency throttle |
MKFlags |= (MKFLAG_EMERGENCY_LANDING); // Set flag for emergency landing |
setStableFlightParameters(); |
} else { |
MKFlags &= ~(MKFLAG_MOTOR_RUN); // Probably not flying, and bad R/C signal. Kill motors. |
} |
} else { |
// end emergency flight (just cut the motors???) |
MKFlags &= ~(MKFLAG_MOTOR_RUN | MKFLAG_EMERGENCY_LANDING); |
} |
} else { |
// signal is acceptable |
if(controlMixer_getSignalQuality() > SIGNAL_BAD) { |
// Reset emergency landing control variables. |
MKFlags &= ~(MKFLAG_EMERGENCY_LANDING); // clear flag for emergency landing |
// The time is in whole seconds. |
emergencyFlightTime = (uint16_t)staticParams.EmergencyGasDuration * 488; |
} |
if (controlMixer_getSignalQuality() <= SIGNAL_BAD) { // the rc-frame signal is not reveived or noisy |
RED_ON; |
beepRCAlarm(); |
|
// If some throttle is given, and the motor-run flag is on, increase the probability that we are flying. |
if(throttleTerm > 40 && (MKFlags & MKFLAG_MOTOR_RUN)) { |
// increment flight-time counter until overflow. |
if(isFlying != 0xFFFF) isFlying++; |
} else |
/* |
* When standing on the ground, do not apply I controls and zero the yaw stick. |
* Probably to avoid integration effects that will cause the copter to spin |
* or flip when taking off. |
*/ |
if(isFlying < 256) { |
IPart[PITCH] = IPart[ROLL] = 0; |
// TODO: Don't stomp on other modules' variables!!! |
// controlYaw = 0; |
PDPartYaw = 0; // instead. |
if(isFlying == 250) { |
// HC_setGround(); |
updateCompassCourse = 1; |
yawAngleDiff = 0; |
} |
} else { |
// Set fly flag. TODO: Hmmm what can we trust - the isFlying counter or the flag? |
// Answer: The counter. The flag is not read from anywhere anyway... except the NC maybe. |
MKFlags |= (MKFLAG_FLY); |
} |
if (emergencyFlightTime) { |
// continue emergency flight |
emergencyFlightTime--; |
if (isFlying > 256) { |
// We're probably still flying. Descend slowly. |
throttleTerm = staticParams.EmergencyGas; // Set emergency throttle |
MKFlags |= (MKFLAG_EMERGENCY_LANDING); // Set flag for emergency landing |
setStableFlightParameters(); |
} else { |
MKFlags &= ~(MKFLAG_MOTOR_RUN); // Probably not flying, and bad R/C signal. Kill motors. |
} |
} else { |
// end emergency flight (just cut the motors???) |
MKFlags &= ~(MKFLAG_MOTOR_RUN | MKFLAG_EMERGENCY_LANDING); |
} |
} else { |
// signal is acceptable |
if (controlMixer_getSignalQuality() > SIGNAL_BAD) { |
// Reset emergency landing control variables. |
MKFlags &= ~(MKFLAG_EMERGENCY_LANDING); // clear flag for emergency landing |
// The time is in whole seconds. |
emergencyFlightTime = (uint16_t) staticParams.EmergencyGasDuration * 488; |
} |
|
commands_handleCommands(); |
// If some throttle is given, and the motor-run flag is on, increase the probability that we are flying. |
if (throttleTerm > 40 && (MKFlags & MKFLAG_MOTOR_RUN)) { |
// increment flight-time counter until overflow. |
if (isFlying != 0xFFFF) |
isFlying++; |
} else |
/* |
* When standing on the ground, do not apply I controls and zero the yaw stick. |
* Probably to avoid integration effects that will cause the copter to spin |
* or flip when taking off. |
*/ |
if (isFlying < 256) { |
IPart[PITCH] = IPart[ROLL] = 0; |
// TODO: Don't stomp on other modules' variables!!! |
// controlYaw = 0; |
PDPartYaw = 0; // instead. |
if (isFlying == 250) { |
// HC_setGround(); |
updateCompassCourse = 1; |
yawAngleDiff = 0; |
} |
} else { |
// Set fly flag. TODO: Hmmm what can we trust - the isFlying counter or the flag? |
// Answer: The counter. The flag is not read from anywhere anyway... except the NC maybe. |
MKFlags |= (MKFLAG_FLY); |
} |
|
// if(controlMixer_getSignalQuality() >= SIGNAL_GOOD) { |
setNormalFlightParameters(); |
// } |
} // end else (not bad signal case) |
// end part1a: 750-800 usec. |
/* |
* Looping the H&I way basically is just a matter of turning off attitude angle measurement |
* by integration (because 300 deg/s gyros are too slow) and turning down the throttle. |
* This is the throttle part. |
*/ |
if(looping) { |
if(throttleTerm > staticParams.LoopGasLimit) throttleTerm = staticParams.LoopGasLimit; |
} |
|
/************************************************************************/ |
/* Yawing */ |
/************************************************************************/ |
if(abs(controlYaw) > 4 * staticParams.StickYawP) { // yaw stick is activated |
ignoreCompassTimer = 1000; |
if(!(staticParams.GlobalConfig & CFG_COMPASS_FIX)) { |
updateCompassCourse = 1; |
} |
} |
|
// yawControlRate = controlYaw; |
commands_handleCommands(); |
|
// Trim drift of yawAngleDiff with controlYaw. |
// TODO: We want NO feedback of control related stuff to the attitude related stuff. |
// This seems to be used as: Difference desired <--> real heading. |
yawAngleDiff -= controlYaw; |
|
// limit the effect |
CHECK_MIN_MAX(yawAngleDiff, -50000, 50000); |
|
/************************************************************************/ |
/* Compass is currently not supported. */ |
/************************************************************************/ |
if(staticParams.GlobalConfig & (CFG_COMPASS_ACTIVE|CFG_GPS_ACTIVE)) { |
updateCompass(); |
} |
|
// if(controlMixer_getSignalQuality() >= SIGNAL_GOOD) { |
setNormalFlightParameters(); |
// } |
} // end else (not bad signal case) |
// end part1a: 750-800 usec. |
/* |
* Looping the H&I way basically is just a matter of turning off attitude angle measurement |
* by integration (because 300 deg/s gyros are too slow) and turning down the throttle. |
* This is the throttle part. |
*/ |
if (looping) { |
if (throttleTerm > staticParams.LoopGasLimit) |
throttleTerm = staticParams.LoopGasLimit; |
} |
|
/************************************************************************/ |
/* Yawing */ |
/************************************************************************/ |
if (abs(controlYaw) > 4 * staticParams.StickYawP) { // yaw stick is activated |
ignoreCompassTimer = 1000; |
if (!(staticParams.GlobalConfig & CFG_COMPASS_FIX)) { |
updateCompassCourse = 1; |
} |
} |
|
// yawControlRate = controlYaw; |
|
// Trim drift of yawAngleDiff with controlYaw. |
// TODO: We want NO feedback of control related stuff to the attitude related stuff. |
// This seems to be used as: Difference desired <--> real heading. |
yawAngleDiff -= controlYaw; |
|
// limit the effect |
CHECK_MIN_MAX(yawAngleDiff, -50000, 50000); |
|
/************************************************************************/ |
/* Compass is currently not supported. */ |
/************************************************************************/ |
if (staticParams.GlobalConfig & (CFG_COMPASS_ACTIVE | CFG_GPS_ACTIVE)) { |
updateCompass(); |
} |
|
#if defined (USE_NAVICTRL) |
/************************************************************************/ |
/* GPS is currently not supported. */ |
/************************************************************************/ |
if(staticParams.GlobalConfig & CFG_GPS_ACTIVE) { |
GPS_Main(); |
MKFlags &= ~(MKFLAG_CALIBRATE | MKFLAG_START); |
} else { |
// GPSStickPitch = 0; |
// GPSStickRoll = 0; |
} |
/************************************************************************/ |
/* GPS is currently not supported. */ |
/************************************************************************/ |
if(staticParams.GlobalConfig & CFG_GPS_ACTIVE) { |
GPS_Main(); |
MKFlags &= ~(MKFLAG_CALIBRATE | MKFLAG_START); |
} else { |
// GPSStickPitch = 0; |
// GPSStickRoll = 0; |
} |
#endif |
// end part 1: 750-800 usec. |
// start part 3: 350 - 400 usec. |
// end part 1: 750-800 usec. |
// start part 3: 350 - 400 usec. |
#define SENSOR_LIMIT (4096 * 4) |
/************************************************************************/ |
/************************************************************************/ |
|
/* Calculate control feedback from angle (gyro integral) */ |
/* and angular velocity (gyro signal) */ |
/************************************************************************/ |
// The P-part is the P of the PID controller. That's the angle integrals (not rates). |
for (axis=PITCH; axis<=ROLL; axis++) { |
if(looping & ((1<<4)<<axis)) { |
PPart[axis] = 0; |
} else { // TODO: Where do the 44000 come from??? |
PPart[axis] = angle[axis] * gyroIFactor / (44000 / CONTROL_SCALING); // P-Part - Proportional to Integral |
} |
/* Calculate control feedback from angle (gyro integral) */ |
/* and angular velocity (gyro signal) */ |
/************************************************************************/ |
// The P-part is the P of the PID controller. That's the angle integrals (not rates). |
for (axis = PITCH; axis <= ROLL; axis++) { |
if (looping & ((1 << 4) << axis)) { |
PPart[axis] = 0; |
} else { // TODO: Where do the 44000 come from??? |
PPart[axis] = angle[axis] * gyroIFactor / (44000 / CONTROL_SCALING); // P-Part - Proportional to Integral |
} |
|
/* |
* Now blend in the D-part - proportional to the Differential of the integral = the rate. |
* Read this as: PDPart = PPart + rate_PID * pfactor * CONTROL_SCALING |
* where pfactor is in [0..1]. |
*/ |
PDPart[axis] = PPart[axis] + (int32_t)((int32_t)rate_PID[axis] * gyroPFactor / (256L / CONTROL_SCALING)) |
+ (differential[axis] * (int16_t)dynamicParams.GyroD) / 16; |
/* |
* Now blend in the D-part - proportional to the Differential of the integral = the rate. |
* Read this as: PDPart = PPart + rate_PID * pfactor * CONTROL_SCALING |
* where pfactor is in [0..1]. |
*/ |
PDPart[axis] = PPart[axis] + (int32_t) ((int32_t) rate_PID[axis] |
* gyroPFactor / (256L / CONTROL_SCALING)) + (differential[axis] |
* (int16_t) dynamicParams.GyroD) / 16; |
|
CHECK_MIN_MAX(PDPart[axis], -SENSOR_LIMIT, SENSOR_LIMIT); |
} |
CHECK_MIN_MAX(PDPart[axis], -SENSOR_LIMIT, SENSOR_LIMIT); |
} |
|
PDPartYaw = |
(int32_t)(yawRate * 2 * (int32_t)yawPFactor) / (256L / CONTROL_SCALING) |
+ (int32_t)(yawAngleDiff * yawIFactor) / (2 * (44000 / CONTROL_SCALING)); |
|
// limit control feedback |
CHECK_MIN_MAX(PDPartYaw, -SENSOR_LIMIT, SENSOR_LIMIT); |
|
/* |
* Compose throttle term. |
* If a Bl-Ctrl is missing, prevent takeoff. |
*/ |
if(missingMotor) { |
// if we are in the lift off condition. Hmmmmmm when is throttleTerm == 0 anyway??? |
if(isFlying > 1 && isFlying < 50 && throttleTerm > 0) |
isFlying = 1; // keep within lift off condition |
throttleTerm = staticParams.MinThrottle; // reduce gas to min to avoid lift of |
} |
PDPartYaw = (int32_t) (yawRate * 2 * (int32_t) yawPFactor) / (256L |
/ CONTROL_SCALING) + (int32_t) (yawAngleDiff * yawIFactor) / (2 * (44000 |
/ CONTROL_SCALING)); |
|
// Scale up to higher resolution. Hmm why is it not (from controlMixer and down) scaled already? |
throttleTerm *= CONTROL_SCALING; |
// limit control feedback |
CHECK_MIN_MAX(PDPartYaw, -SENSOR_LIMIT, SENSOR_LIMIT); |
|
/* |
* Compose yaw term. |
* The yaw term is limited: Absolute value is max. = the throttle term / 2. |
* However, at low throttle the yaw term is limited to a fixed value, |
* and at high throttle it is limited by the throttle reserve (the difference |
* between current throttle and maximum throttle). |
*/ |
/* |
* Compose throttle term. |
* If a Bl-Ctrl is missing, prevent takeoff. |
*/ |
if (missingMotor) { |
// if we are in the lift off condition. Hmmmmmm when is throttleTerm == 0 anyway??? |
if (isFlying > 1 && isFlying < 50 && throttleTerm > 0) |
isFlying = 1; // keep within lift off condition |
throttleTerm = staticParams.MinThrottle; // reduce gas to min to avoid lift of |
} |
|
// Scale up to higher resolution. Hmm why is it not (from controlMixer and down) scaled already? |
throttleTerm *= CONTROL_SCALING; |
|
/* |
* Compose yaw term. |
* The yaw term is limited: Absolute value is max. = the throttle term / 2. |
* However, at low throttle the yaw term is limited to a fixed value, |
* and at high throttle it is limited by the throttle reserve (the difference |
* between current throttle and maximum throttle). |
*/ |
#define MIN_YAWGAS (40 * CONTROL_SCALING) // yaw also below this gas value |
yawTerm = PDPartYaw - controlYaw * CONTROL_SCALING; |
// Limit yawTerm |
if(throttleTerm > MIN_YAWGAS) { |
CHECK_MIN_MAX(yawTerm, - (throttleTerm / 2), (throttleTerm / 2)); |
} else { |
CHECK_MIN_MAX(yawTerm, - (MIN_YAWGAS / 2), (MIN_YAWGAS / 2)); |
} |
yawTerm = PDPartYaw - controlYaw * CONTROL_SCALING; |
// Limit yawTerm |
if (throttleTerm > MIN_YAWGAS) { |
CHECK_MIN_MAX(yawTerm, - (throttleTerm / 2), (throttleTerm / 2)); |
} else { |
CHECK_MIN_MAX(yawTerm, - (MIN_YAWGAS / 2), (MIN_YAWGAS / 2)); |
} |
|
tmp_int = staticParams.MaxThrottle * CONTROL_SCALING; |
CHECK_MIN_MAX(yawTerm, -(tmp_int - throttleTerm), (tmp_int - throttleTerm)); |
tmp_int = staticParams.MaxThrottle * CONTROL_SCALING; |
CHECK_MIN_MAX(yawTerm, -(tmp_int - throttleTerm), (tmp_int - throttleTerm)); |
|
tmp_int = (int32_t)((int32_t)dynamicParams.DynamicStability * (int32_t)(throttleTerm + abs(yawTerm) / 2)) / 64; |
tmp_int = (int32_t) ((int32_t) dynamicParams.DynamicStability |
* (int32_t) (throttleTerm + abs(yawTerm) / 2)) / 64; |
|
for (axis=PITCH; axis<=ROLL; axis++) { |
/* |
* Compose pitch and roll terms. This is finally where the sticks come into play. |
*/ |
if(gyroIFactor) { |
// Integration mode: Integrate (angle - stick) = the difference between angle and stick pos. |
// That means: Holding the stick a little forward will, at constant flight attitude, cause this to grow (decline??) over time. |
// TODO: Find out why this seems to be proportional to stick position - not integrating it at all. |
IPart[axis] += PPart[axis] - control[axis]; // Integrate difference between P part (the angle) and the stick pos. |
} else { |
// "HH" mode: Integrate (rate - stick) = the difference between rotation rate and stick pos. |
// To keep up with a full stick PDPart should be about 156... |
IPart[axis] += PDPart[axis] - control[axis]; // With gyroIFactor == 0, PDPart is really just a D-part. Integrate D-part (the rot. rate) and the stick pos. |
} |
for (axis = PITCH; axis <= ROLL; axis++) { |
/* |
* Compose pitch and roll terms. This is finally where the sticks come into play. |
*/ |
if (gyroIFactor) { |
// Integration mode: Integrate (angle - stick) = the difference between angle and stick pos. |
// That means: Holding the stick a little forward will, at constant flight attitude, cause this to grow (decline??) over time. |
// TODO: Find out why this seems to be proportional to stick position - not integrating it at all. |
IPart[axis] += PPart[axis] - control[axis]; // Integrate difference between P part (the angle) and the stick pos. |
} else { |
// "HH" mode: Integrate (rate - stick) = the difference between rotation rate and stick pos. |
// To keep up with a full stick PDPart should be about 156... |
IPart[axis] += PDPart[axis] - control[axis]; // With gyroIFactor == 0, PDPart is really just a D-part. Integrate D-part (the rot. rate) and the stick pos. |
} |
|
// TODO: From which planet comes the 16000? |
CHECK_MIN_MAX(IPart[axis], -(CONTROL_SCALING * 16000L), (CONTROL_SCALING * 16000L)); |
// Add (P, D) parts minus stick pos. to the scaled-down I part. |
term[axis] = PDPart[axis] - control[axis] + IPart[axis] / Ki; // PID-controller for pitch |
// TODO: From which planet comes the 16000? |
CHECK_MIN_MAX(IPart[axis], -(CONTROL_SCALING * 16000L), (CONTROL_SCALING * 16000L)); |
// Add (P, D) parts minus stick pos. to the scaled-down I part. |
term[axis] = PDPart[axis] - control[axis] + IPart[axis] / Ki; // PID-controller for pitch |
|
/* |
* Apply "dynamic stability" - that is: Limit pitch and roll terms to a growing function of throttle and yaw(!). |
* The higher the dynamic stability parameter, the wider the bounds. 64 seems to be a kind of unity |
* (max. pitch or roll term is the throttle value). |
* TODO: Why a growing function of yaw? |
*/ |
CHECK_MIN_MAX(term[axis], -tmp_int, tmp_int); |
} |
// end part 3: 350 - 400 usec. |
/* |
* Apply "dynamic stability" - that is: Limit pitch and roll terms to a growing function of throttle and yaw(!). |
* The higher the dynamic stability parameter, the wider the bounds. 64 seems to be a kind of unity |
* (max. pitch or roll term is the throttle value). |
* TODO: Why a growing function of yaw? |
*/ |
CHECK_MIN_MAX(term[axis], -tmp_int, tmp_int); |
} |
// end part 3: 350 - 400 usec. |
|
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Universal Mixer |
// Each (pitch, roll, throttle, yaw) term is in the range [0..255 * CONTROL_SCALING]. |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Universal Mixer |
// Each (pitch, roll, throttle, yaw) term is in the range [0..255 * CONTROL_SCALING]. |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
|
DebugOut.Analog[12] = term[PITCH]; |
DebugOut.Analog[13] = term[ROLL]; |
DebugOut.Analog[14] = yawTerm; |
DebugOut.Analog[15] = throttleTerm; |
DebugOut.Analog[12] = term[PITCH]; |
DebugOut.Analog[13] = term[ROLL]; |
DebugOut.Analog[14] = yawTerm; |
DebugOut.Analog[15] = throttleTerm; |
|
for(i = 0; i < MAX_MOTORS; i++) { |
int16_t tmp; |
if (MKFlags & MKFLAG_MOTOR_RUN && Mixer.Motor[i][MIX_THROTTLE] > 0) { |
tmp = ((int32_t)throttleTerm * Mixer.Motor[i][MIX_THROTTLE]) / 64L; |
tmp += ((int32_t)term[PITCH] * Mixer.Motor[i][MIX_PITCH]) / 64L; |
tmp += ((int32_t)term[ROLL] * Mixer.Motor[i][MIX_ROLL]) / 64L; |
tmp += ((int32_t)yawTerm * Mixer.Motor[i][MIX_YAW]) / 64L; |
motorFilters[i] = motorFilter(tmp, motorFilters[i]); |
// Now we scale back down to a 0..255 range. |
tmp = motorFilters[i] / CONTROL_SCALING; |
// So this was the THIRD time a throttle was limited. But should the limitation |
// apply to the common throttle signal (the one used for setting the "power" of |
// all motors together) or should it limit the throttle set for each motor, |
// including mix components of pitch, roll and yaw? I think only the common |
// throttle should be limited. |
// --> WRONG. This caused motors to stall completely in tight maneuvers. |
// Apply to individual signals instead. |
CHECK_MIN_MAX(tmp, staticParams.MinThrottle, staticParams.MaxThrottle); |
CHECK_MIN_MAX(tmp, 1, 255); |
motor[i].SetPoint = tmp; |
} |
else if (motorTestActive) { |
motor[i].SetPoint = motorTest[i]; |
} else { |
motor[i].SetPoint = 0; |
} |
if (i < 4) |
DebugOut.Analog[22+i] = motor[i].SetPoint; |
} |
I2C_Start(TWI_STATE_MOTOR_TX); |
|
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Debugging |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
if(!(--debugDataTimer)) { |
debugDataTimer = 24; // update debug outputs at 488 / 24 = 20.3 Hz. |
DebugOut.Analog[0] = (10 * angle[PITCH]) / GYRO_DEG_FACTOR_PITCHROLL; // in 0.1 deg |
DebugOut.Analog[1] = (10 * angle[ROLL]) / GYRO_DEG_FACTOR_PITCHROLL; // in 0.1 deg |
DebugOut.Analog[2] = yawGyroHeading / GYRO_DEG_FACTOR_YAW; |
for (i = 0; i < MAX_MOTORS; i++) { |
int16_t tmp; |
if (MKFlags & MKFLAG_MOTOR_RUN && Mixer.Motor[i][MIX_THROTTLE] > 0) { |
tmp = ((int32_t) throttleTerm * Mixer.Motor[i][MIX_THROTTLE]) / 64L; |
tmp += ((int32_t) term[PITCH] * Mixer.Motor[i][MIX_PITCH]) / 64L; |
tmp += ((int32_t) term[ROLL] * Mixer.Motor[i][MIX_ROLL]) / 64L; |
tmp += ((int32_t) yawTerm * Mixer.Motor[i][MIX_YAW]) / 64L; |
motorFilters[i] = motorFilter(tmp, motorFilters[i]); |
// Now we scale back down to a 0..255 range. |
tmp = motorFilters[i] / CONTROL_SCALING; |
// So this was the THIRD time a throttle was limited. But should the limitation |
// apply to the common throttle signal (the one used for setting the "power" of |
// all motors together) or should it limit the throttle set for each motor, |
// including mix components of pitch, roll and yaw? I think only the common |
// throttle should be limited. |
// --> WRONG. This caused motors to stall completely in tight maneuvers. |
// Apply to individual signals instead. |
CHECK_MIN_MAX(tmp, staticParams.MinThrottle, staticParams.MaxThrottle); |
CHECK_MIN_MAX(tmp, 1, 255); |
motor[i].SetPoint = tmp; |
} else if (motorTestActive) { |
motor[i].SetPoint = motorTest[i]; |
} else { |
motor[i].SetPoint = 0; |
} |
if (i < 4) |
DebugOut.Analog[22 + i] = motor[i].SetPoint; |
} |
I2C_Start(TWI_STATE_MOTOR_TX); |
|
/* |
DebugOut.Analog[23] = (yawRate * 2 * (int32_t)yawPFactor) / (256L / CONTROL_SCALING); |
DebugOut.Analog[24] = controlYaw; |
DebugOut.Analog[25] = yawAngleDiff / 100L; |
DebugOut.Analog[26] = accNoisePeak[PITCH]; |
DebugOut.Analog[27] = accNoisePeak[ROLL]; |
DebugOut.Analog[30] = gyroNoisePeak[PITCH]; |
DebugOut.Analog[31] = gyroNoisePeak[ROLL]; |
*/ |
} |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// Debugging |
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
if (!(--debugDataTimer)) { |
debugDataTimer = 24; // update debug outputs at 488 / 24 = 20.3 Hz. |
DebugOut.Analog[0] = (10 * angle[PITCH]) / GYRO_DEG_FACTOR_PITCHROLL; // in 0.1 deg |
DebugOut.Analog[1] = (10 * angle[ROLL]) / GYRO_DEG_FACTOR_PITCHROLL; // in 0.1 deg |
DebugOut.Analog[2] = yawGyroHeading / GYRO_DEG_FACTOR_YAW; |
|
/* |
DebugOut.Analog[23] = (yawRate * 2 * (int32_t)yawPFactor) / (256L / CONTROL_SCALING); |
DebugOut.Analog[24] = controlYaw; |
DebugOut.Analog[25] = yawAngleDiff / 100L; |
DebugOut.Analog[26] = accNoisePeak[PITCH]; |
DebugOut.Analog[27] = accNoisePeak[ROLL]; |
DebugOut.Analog[30] = gyroNoisePeak[PITCH]; |
DebugOut.Analog[31] = gyroNoisePeak[ROLL]; |
*/ |
} |
} |