0,0 → 1,139 |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Copyright (c) Holger Buss, Ingo Busker |
// + Thanks to Marcel Haller (Lion) for the nice idea and first implementation |
// + Nur für den privaten Gebrauch |
// + www.MikroKopter.com |
// + porting the sources to other systems or using the software on other systems (except hardware from www.mikrokopter.de) is not allowed |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Es gilt für das gesamte Projekt (Hardware, Software, Binärfiles, Sourcecode und Dokumentation), |
// + dass eine Nutzung (auch auszugsweise) nur für den privaten (nicht-kommerziellen) Gebrauch zulässig ist. |
// + Sollten direkte oder indirekte kommerzielle Absichten verfolgt werden, ist mit uns (info@mikrokopter.de) Kontakt |
// + bzgl. der Nutzungsbedingungen aufzunehmen. |
// + Eine kommerzielle Nutzung ist z.B.Verkauf von MikroKoptern, Bestückung und Verkauf von Platinen oder Bausätzen, |
// + Verkauf von Luftbildaufnahmen, usw. |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Werden Teile des Quellcodes (mit oder ohne Modifikation) weiterverwendet oder veröffentlicht, |
// + unterliegen sie auch diesen Nutzungsbedingungen und diese Nutzungsbedingungen incl. Copyright müssen dann beiliegen |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Sollte die Software (auch auszugesweise) oder sonstige Informationen des MikroKopter-Projekts |
// + auf anderen Webseiten oder sonstigen Medien veröffentlicht werden, muss unsere Webseite "http://www.mikrokopter.de" |
// + eindeutig als Ursprung verlinkt werden |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Keine Gewähr auf Fehlerfreiheit, Vollständigkeit oder Funktion |
// + Benutzung auf eigene Gefahr |
// + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Die Portierung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur |
// + mit unserer Zustimmung zulässig |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Redistributions of source code (with or without modifications) must retain the above copyright notice, |
// + this list of conditions and the following disclaimer. |
// + * Neither the name of the copyright holders nor the names of contributors may be used to endorse or promote products derived |
// + from this software without specific prior written permission. |
// + * The use of this project (hardware, software, binary files, sources and documentation) is only permittet |
// + for non-commercial use (directly or indirectly) |
// + Commercial use (for excample: selling of MikroKopters, selling of PCBs, assembly, ...) is only permitted |
// + with our written permission |
// + * If sources or documentations are redistributet on other webpages, out webpage (http://www.MikroKopter.de) must be |
// + clearly linked as origin |
// + * porting to systems other than hardware from www.mikrokopter.de is not allowed |
// + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
// + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
// + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
// + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
// + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
// + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
// + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
// + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN// + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
// + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
// + POSSIBILITY OF SUCH DAMAGE. |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
#include "capacity.h" |
#include "twimaster.h" |
#include "main.h" |
#include "timer0.h" |
#include "analog.h" |
|
#define CAPACITY_UPDATE_INTERVAL 10 // 10 ms |
#define FC_OFFSET_CURRENT 5 // calculate with a current of 0.5A |
#define BL_OFFSET_CURRENT 2 // calculate with a current of 0.2A |
|
|
// global varialbles |
unsigned short update_timer = 0; |
Capacity_t Capacity; |
|
// initialize capacity calculation |
void Capacity_Init(void) |
{ |
Capacity.ActualCurrent = 0; |
Capacity.UsedCapacity = 0; |
Capacity.ActualPower = 0; |
update_timer = SetDelay(CAPACITY_UPDATE_INTERVAL); |
} |
|
|
// called in main loop at a regular interval |
void Capacity_Update(void) |
{ |
unsigned short Current, SetSum; // max value will be 255 * 12 = 3060 |
static unsigned short SubCounter = 0; |
static unsigned short CurrentOffset = 0; |
static unsigned long SumCurrentOffset = 0; |
unsigned char i, NumOfMotors; |
|
if(CheckDelay(update_timer)) |
{ |
update_timer += CAPACITY_UPDATE_INTERVAL; // do not use SetDelay to avoid timing leaks |
// determine sum of all present BL currents and setpoints |
Current = 0; |
SetSum = 0; |
NumOfMotors = 0; |
for(i = 0; i < MAX_MOTORS; i++) |
{ |
if(Motor[i].State & MOTOR_STATE_PRESENT_MASK) |
{ |
NumOfMotors++; |
Current += (unsigned int)(Motor[i].Current); |
SetSum += (unsigned int)(Motor[i].SetPoint); |
} |
} |
if(SetSum == 0) // if all setpoints are 0 |
{ // determine offsets of motor currents |
#define CURRENT_AVERAGE 8 // 8bit = 256 * 10 ms = 2.56s average time |
CurrentOffset = (unsigned int)(SumCurrentOffset>>CURRENT_AVERAGE); |
SumCurrentOffset -= CurrentOffset; |
SumCurrentOffset += Current; |
// after averaging set current to static offset |
Current = FC_OFFSET_CURRENT; |
} |
else // some motors are running, includes also motor test condition, where "MotorRunning" is false |
{ // subtract offset |
if(Current > CurrentOffset) Current -= CurrentOffset; |
else Current = 0; |
// add the FC and BL Offsets |
Current += FC_OFFSET_CURRENT + NumOfMotors * BL_OFFSET_CURRENT; |
} |
|
// update actual Current |
Capacity.ActualCurrent = Current; |
// update actual Power |
if(Current < 255) Capacity.ActualPower = (UBat * Current) / 100; // in W higher resolution |
else Capacity.ActualPower = (UBat * (Current/4)) / 25; // in W |
|
// update used capacity |
SubCounter += Current; |
|
// 100mA * 1ms * CAPACITY_UPDATE_INTERVAL = 1 mA * 100 ms * CAPACITY_UPDATE_INTERVAL |
// = 1mA * 0.1s * CAPACITY_UPDATE_INTERVAL = 1mA * 1min / (600 / CAPACITY_UPDATE_INTERVAL) |
// = 1mAh / (36000 / CAPACITY_UPDATE_INTERVAL) |
#define SUB_COUNTER_LIMIT (36000 / CAPACITY_UPDATE_INTERVAL) |
if(SubCounter > SUB_COUNTER_LIMIT) |
{ |
Capacity.UsedCapacity++; // we have one mAh more |
SubCounter -= SUB_COUNTER_LIMIT; // keep the remaining sub part |
} |
} // EOF check delay update timer |
} |