0,0 → 1,131 |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Copyright (c) 04.2007 Holger Buss |
// + Nur für den privaten Gebrauch |
// + www.MikroKopter.com |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Es gilt für das gesamte Projekt (Hardware, Software, Binärfiles, Sourcecode und Dokumentation), |
// + dass eine Nutzung (auch auszugsweise) nur für den privaten (nicht-kommerziellen) Gebrauch zulässig ist. |
// + Sollten direkte oder indirekte kommerzielle Absichten verfolgt werden, ist mit uns (info@mikrokopter.de) Kontakt |
// + bzgl. der Nutzungsbedingungen aufzunehmen. |
// + Eine kommerzielle Nutzung ist z.B.Verkauf von MikroKoptern, Bestückung und Verkauf von Platinen oder Bausätzen, |
// + Verkauf von Luftbildaufnahmen, usw. |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Werden Teile des Quellcodes (mit oder ohne Modifikation) weiterverwendet oder veröffentlicht, |
// + unterliegen sie auch diesen Nutzungsbedingungen und diese Nutzungsbedingungen incl. Copyright müssen dann beiliegen |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Sollte die Software (auch auszugesweise) oder sonstige Informationen des MikroKopter-Projekts |
// + auf anderen Webseiten oder sonstigen Medien veröffentlicht werden, muss unsere Webseite "http://www.mikrokopter.de" |
// + eindeutig als Ursprung verlinkt werden |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Keine Gewähr auf Fehlerfreiheit, Vollständigkeit oder Funktion |
// + Benutzung auf eigene Gefahr |
// + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Die Portierung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur |
// + mit unserer Zustimmung zulässig |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Redistributions of source code (with or without modifications) must retain the above copyright notice, |
// + this list of conditions and the following disclaimer. |
// + * Neither the name of the copyright holders nor the names of contributors may be used to endorse or promote products derived |
// + from this software without specific prior written permission. |
// + * The use of this project (hardware, software, binary files, sources and documentation) is only permittet |
// + for non-commercial use (directly or indirectly) |
// + Commercial use (for excample: selling of MikroKopters, selling of PCBs, assembly, ...) is only permitted |
// + with our written permission |
// + * If sources or documentations are redistributet on other webpages, out webpage (http://www.MikroKopter.de) must be |
// + clearly linked as origin |
// + * porting to systems other than hardware from www.mikrokopter.de is not allowed |
// + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
// + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
// + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
// + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
// + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
// + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
// + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
// + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN// + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
// + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
// + POSSIBILITY OF SUCH DAMAGE. |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
#include <avr/io.h> |
#include <stdlib.h> |
#include <inttypes.h> |
#include "timer0.h" |
#include "fc.h" |
#include "rc.h" |
#include "eeprom.h" |
#include "mk3mag.h" |
|
uint8_t PWMTimeout = 12; |
ToMk3Mag_t ToMk3Mag; |
|
|
/*********************************************/ |
/* Initialize Interface to MK3MAG Compass */ |
/*********************************************/ |
void MK3MAG_Init(void) |
{ |
// Port PC4 connected to PWM output from compass module |
DDRC &= ~(1<<DDC4); // set as input |
PORTC |= (1<<PORTC4); // pull up to increase PWM counter also if nothing is connected |
|
PWMTimeout = 0; |
|
ToMk3Mag.CalState = 0; |
ToMk3Mag.Orientation = 1; |
} |
|
|
/*********************************************/ |
/* Get PWM from MK3MAG */ |
/*********************************************/ |
void MK3MAG_Update(void) // called every 102.4 us by timer 0 ISR |
{ |
static uint16_t PWMCount = 0; |
static uint16_t BeepDelay = 0; |
// The pulse width varies from 1ms (0°) to 36.99ms (359.9°) |
// in other words 100us/° with a +1ms offset. |
// The signal goes low for 65ms between pulses, |
// so the cycle time is 65mS + the pulse width. |
|
// pwm is high |
|
if(PINC & (1<<PINC4)) |
{ // If PWM signal is high increment PWM high counter |
// This counter is incremented by a periode of 102.4us, |
// i.e. the resoluton of pwm coded heading is approx. 1 deg. |
PWMCount++; |
// pwm overflow? |
if (PWMCount > 400) |
{ |
if(PWMTimeout) PWMTimeout--; // decrement timeout |
CompassHeading = -1; // unknown heading |
PWMCount = 0; // reset PWM Counter |
} |
|
} |
else // pwm is low |
{ // ignore pwm values values of 0 and higher than 37 ms; |
if((PWMCount) && (PWMCount < 362)) // 362 * 102.4us = 37.0688 ms |
{ |
if(PWMCount <10) CompassHeading = 0; |
else CompassHeading = ((uint32_t)(PWMCount - 10) * 1049L)/1024; // correct timebase and offset |
CompassOffCourse = ((540 + CompassHeading - CompassCourse) % 360) - 180; |
PWMTimeout = 12; // if 12 periodes long no valid PWM was detected the data are invalid |
// 12 * 362 counts * 102.4 us |
} |
PWMCount = 0; // reset pwm counter |
} |
if(!PWMTimeout) |
{ |
if(CheckDelay(BeepDelay)) |
{ |
if(!BeepTime) BeepTime = 100; // make noise with 10Hz to signal the compass problem |
BeepDelay = SetDelay(100); |
} |
} |
} |
|
|
|