0,0 → 1,3323 |
/*--------------------------------------------------------------------------------------------------------------------------------------------------- |
* irmp.c - infrared multi-protocol decoder, supports several remote control protocols |
* |
* Copyright (c) 2009-2010 Frank Meyer - frank(at)fli4l.de |
* |
* $Id: irmp.c,v 1.84 2010/11/09 19:18:32 fm Exp $ |
* |
* ATMEGA88 @ 8 MHz |
* |
* Typical manufacturers: |
* |
* SIRCS - Sony |
* NEC - NEC, Yamaha, Canon, Tevion, Harman/Kardon, Hitachi, JVC, Pioneer, Toshiba, Xoro, Orion, and many other Japanese manufacturers |
* SAMSUNG - Samsung |
* SAMSUNG32 - Samsung |
* MATSUSHITA - Matsushita |
* KASEIKYO - Panasonic, Denon & other Japanese manufacturers (members of "Japan's Association for Electric Home Application") |
* RECS80 - Philips, Nokia, Thomson, Nordmende, Telefunken, Saba |
* RC5 - Philips and other European manufacturers |
* DENON - Denon |
* RC6 - Philips and other European manufacturers |
* APPLE - Apple |
* NUBERT - Nubert Subwoofer System |
* B&O - Bang & Olufsen |
* PANASONIC - Panasonic (older, yet not implemented) |
* GRUNDIG - Grundig |
* NOKIA - Nokia |
* SIEMENS - Siemens, e.g. Gigaset M740AV |
* |
*--------------------------------------------------------------------------------------------------------------------------------------------------- |
* |
* SIRCS |
* ----- |
* |
* frame: 1 start bit + 12-20 data bits + no stop bit |
* data: 7 command bits + 5 address bits + 0 to 8 additional bits |
* |
* start bit: data "0": data "1": stop bit: |
* -----------------_________ ------_____ ------------______ |
* 2400us 600us 600us 600us 1200us 600 us no stop bit |
* |
*--------------------------------------------------------------------------------------------------------------------------------------------------- |
* |
* NEC + extended NEC |
* ------------------------- |
* |
* frame: 1 start bit + 32 data bits + 1 stop bit |
* data NEC: 8 address bits + 8 inverted address bits + 8 command bits + 8 inverted command bits |
* data extended NEC: 16 address bits + 8 command bits + 8 inverted command bits |
* |
* start bit: data "0": data "1": stop bit: |
* -----------------_________ ------______ ------________________ ------______.... |
* 9000us 4500us 560us 560us 560us 1690 us 560us |
* |
* |
* Repetition frame: |
* |
* -----------------_________------______ .... ~100ms Pause, then repeat |
* 9000us 2250us 560us |
* |
*--------------------------------------------------------------------------------------------------------------------------------------------------- |
* |
* SAMSUNG |
* ------- |
* |
* frame: 1 start bit + 16 data(1) bits + 1 sync bit + additional 20 data(2) bits + 1 stop bit |
* data(1): 16 address bits |
* data(2): 4 ID bits + 8 command bits + 8 inverted command bits |
* |
* start bit: data "0": data "1": sync bit: stop bit: |
* ----------______________ ------______ ------________________ ------______________ ------______.... |
* 4500us 4500us 550us 450us 550us 1450us 550us 4500us 550us |
* |
*--------------------------------------------------------------------------------------------------------------------------------------------------- |
* |
* SAMSUNG32 |
* ---------- |
* |
* frame: 1 start bit + 32 data bits + 1 stop bit |
* data: 16 address bits + 16 command bits |
* |
* start bit: data "0": data "1": stop bit: |
* ----------______________ ------______ ------________________ ------______.... |
* 4500us 4500us 550us 450us 550us 1450us 550us |
* |
*--------------------------------------------------------------------------------------------------------------------------------------------------- |
* |
* MATSUSHITA |
* ---------- |
* |
* frame: 1 start bit + 24 data bits + 1 stop bit |
* data: 6 custom bits + 6 command bits + 12 address bits |
* |
* start bit: data "0": data "1": stop bit: |
* ----------_________ ------______ ------________________ ------______.... |
* 3488us 3488us 872us 872us 872us 2616us 872us |
* |
*--------------------------------------------------------------------------------------------------------------------------------------------------- |
* |
* KASEIKYO |
* -------- |
* |
* frame: 1 start bit + 48 data bits + 1 stop bit |
* data: 16 manufacturer bits + 4 parity bits + 4 genre1 bits + 4 genre2 bits + 10 command bits + 2 id bits + 8 parity bits |
* |
* start bit: data "0": data "1": stop bit: |
* ----------______ ------______ ------________________ ------______.... |
* 3380us 1690us 423us 423us 423us 1269us 423us |
* |
*--------------------------------------------------------------------------------------------------------------------------------------------------- |
* |
* RECS80 |
* ------ |
* |
* frame: 2 start bits + 10 data bits + 1 stop bit |
* data: 1 toggle bit + 3 address bits + 6 command bits |
* |
* start bit: data "0": data "1": stop bit: |
* -----_____________________ -----____________ -----______________ ------_______.... |
* 158us 7432us 158us 4902us 158us 7432us 158us |
* |
*--------------------------------------------------------------------------------------------------------------------------------------------------- |
* |
* RECS80EXT |
* --------- |
* |
* frame: 2 start bits + 11 data bits + 1 stop bit |
* data: 1 toggle bit + 4 address bits + 6 command bits |
* |
* start bit: data "0": data "1": stop bit: |
* -----_____________________ -----____________ -----______________ ------_______.... |
* 158us 3637us 158us 4902us 158us 7432us 158us |
* |
*--------------------------------------------------------------------------------------------------------------------------------------------------- |
* |
* RC5 + RC5X |
* ---------- |
* |
* RC5 frame: 2 start bits + 12 data bits + no stop bit |
* RC5 data: 1 toggle bit + 5 address bits + 6 command bits |
* RC5X frame: 1 start bit + 13 data bits + no stop bit |
* RC5X data: 1 inverted command bit + 1 toggle bit + 5 address bits + 6 command bits |
* |
* start bit: data "0": data "1": |
* ______----- ------______ ______------ |
* 889us 889us 889us 889us 889us 889us |
* |
*--------------------------------------------------------------------------------------------------------------------------------------------------- |
* |
* DENON |
* ----- |
* |
* frame: 0 start bits + 16 data bits + stop bit + 65ms pause + 16 inverted data bits + stop bit |
* data: 5 address bits + 10 command bits |
* |
* data "0": data "1": |
* ------________________ ------______________ |
* 275us 775us 275us 1900us |
* |
*--------------------------------------------------------------------------------------------------------------------------------------------------- |
* |
* RC6 |
* --- |
* |
* RC6 frame: 1 start bit + 1 bit "1" + 3 mode bits + 1 toggle bit + 16 data bits + 2666 µs pause |
* RC6 data: 8 address bits + 8 command bits |
* |
* start bit toggle bit "0": toggle bit "1": data/mode "0": data/mode "1": |
* ____________------- _______------- -------_______ _______------- -------_______ |
* 2666us 889us 889us 889us 889us 889us 444us 444us 444us 444us |
* |
*--------------------------------------------------------------------------------------------------------------------------------------------------- |
* |
* APPLE |
* ----- |
* |
* frame: 1 start bit + 32 data bits + 1 stop bit |
* data: 16 address bits + 11100000 + 8 command bits |
* |
* start bit: data "0": data "1": stop bit: |
* -----------------_________ ------______ ------________________ ------______.... |
* 9000us 4500us 560us 560us 560us 1690 us 560us |
* |
*--------------------------------------------------------------------------------------------------------------------------------------------------- |
* |
* NUBERT (subwoofer system) |
* ------------------------- |
* |
* frame: 1 start bit + 10 data bits + 1 stop bit |
* data: 0 address bits + 10 command bits ? |
* |
* start bit: data "0": data "1": stop bit: |
* ----------_____ ------______ ------________________ ------______.... |
* 1340us 340us 500us 1300us 1340us 340us 500us |
* |
*--------------------------------------------------------------------------------------------------------------------------------------------------- |
* |
* BANG_OLUFSEN |
* ------------ |
* |
* frame: 4 start bits + 16 data bits + 1 trailer bit + 1 stop bit |
* data: 0 address bits + 16 command bits |
* |
* 1st start bit: 2nd start bit: 3rd start bit: 4th start bit: |
* -----________ -----________ -----_____________ -----________ |
* 210us 3000us 210us 3000us 210us 15000us 210us 3000us |
* |
* data "0": data "1": data "repeat bit": trailer bit: stop bit: |
* -----________ -----_____________ -----___________ -----_____________ -----____... |
* 210us 3000us 210us 9000us 210us 6000us 210us 12000us 210us |
* |
*--------------------------------------------------------------------------------------------------------------------------------------------------- |
* |
* GRUNDIG |
* ------- |
* |
* packet: 1 start frame + 19,968ms pause + N info frames + 117,76ms pause + 1 stop frame |
* frame: 1 pre bit + 1 start bit + 9 data bits + no stop bit |
* pause between info frames: 117,76ms |
* |
* data of start frame: 9 x 1 |
* data of info frame: 9 command bits |
* data of stop frame: 9 x 1 |
* |
* pre bit: start bit data "0": data "1": |
* ------____________ ------______ ______------ ------______ |
* 528us 2639us 528us 528us 528us 528us 528us 528us |
* |
*--------------------------------------------------------------------------------------------------------------------------------------------------- |
* |
* NOKIA: |
* ------ |
* |
* Timing similar to Grundig, but 16 data bits: |
* frame: 1 pre bit + 1 start bit + 8 command bits + 8 address bits + no stop bit |
* |
*--------------------------------------------------------------------------------------------------------------------------------------------------- |
* |
* SIEMENS: |
* -------- |
* |
* SIEMENS frame: 1 start bit + 22 data bits + no stop bit |
* SIEMENS data: 13 address bits + 1 repeat bit + 7 data bits + 1 unknown bit |
* |
* start bit data "0": data "1": |
* -------_______ _______------- -------_______ |
* 250us 250us 250us 250us 250us 250us |
* |
*--------------------------------------------------------------------------------------------------------------------------------------------------- |
* |
* PANASONIC (older protocol, yet not implemented, see also MATSUSHITA, timing very similar) |
* ----------------------------------------------------------------------------------------- |
* |
* frame: 1 start bit + 22 data bits + 1 stop bit |
* 22 data bits = 5 custom bits + 6 data bits + 5 inverted custom bits + 6 inverted data bits |
* |
* European version: T = 456us |
* USA & Canada version: T = 422us |
* |
* start bit: data "0": data "1": stop bit: |
* 8T 8T 2T 2T 2T 6T 2T |
* -------------____________ ------_____ ------_____________ ------_______.... |
* 3648us 3648us 912us 912us 912us 2736us 912us (Europe) |
* 3376us 3376us 844us 844us 844us 2532us 844us (US) |
* |
*--------------------------------------------------------------------------------------------------------------------------------------------------- |
* |
* This program is free software; you can redistribute it and/or modify |
* it under the terms of the GNU General Public License as published by |
* the Free Software Foundation; either version 2 of the License, or |
* (at your option) any later version. |
*--------------------------------------------------------------------------------------------------------------------------------------------------- |
*/ |
|
#if defined(__PCM__) || defined(__PCB__) || defined(__PCH__) // CCS PIC Compiler instead of AVR |
#define PIC_CCS_COMPILER |
#endif |
|
#ifdef unix // test on linux/unix |
#include <stdio.h> |
#include <unistd.h> |
#include <stdlib.h> |
#include <string.h> |
#include <inttypes.h> |
|
#define ANALYZE |
#define PROGMEM |
#define memcpy_P memcpy |
|
#else // not unix: |
|
#ifdef WIN32 |
#include <stdio.h> |
#include <string.h> |
typedef unsigned char uint8_t; |
typedef unsigned short uint16_t; |
#define ANALYZE |
#define PROGMEM |
#define memcpy_P memcpy |
|
#else |
|
#ifndef CODEVISION |
|
#ifdef PIC_CCS_COMPILER |
|
#include <string.h> |
typedef unsigned int8 uint8_t; |
typedef unsigned int16 uint16_t; |
#define PROGMEM |
#define memcpy_P memcpy |
|
#else // AVR: |
|
#include <inttypes.h> |
#include <stdio.h> |
#include <string.h> |
#include <avr/io.h> |
#include <util/delay.h> |
#include <avr/pgmspace.h> |
|
#endif // PIC_CCS_COMPILER |
#endif // CODEVISION |
|
#endif // windows |
#endif // unix |
|
#ifndef IRMP_USE_AS_LIB |
#include "irmpconfig.h" |
#endif |
#include "irmp.h" |
|
#if IRMP_SUPPORT_GRUNDIG_PROTOCOL == 1 || IRMP_SUPPORT_NOKIA_PROTOCOL == 1 |
#define IRMP_SUPPORT_GRUNDIG_OR_NOKIA_PROTOCOL 1 |
#else |
#define IRMP_SUPPORT_GRUNDIG_OR_NOKIA_PROTOCOL 0 |
#endif |
|
#if IRMP_SUPPORT_RC5_PROTOCOL == 1 || IRMP_SUPPORT_RC6_PROTOCOL == 1 || IRMP_SUPPORT_GRUNDIG_OR_NOKIA_PROTOCOL == 1 || IRMP_SUPPORT_SIEMENS_PROTOCOL == 1 |
#define IRMP_SUPPORT_MANCHESTER 1 |
#else |
#define IRMP_SUPPORT_MANCHESTER 0 |
#endif |
|
#define IRMP_KEY_REPETITION_LEN (uint16_t)(F_INTERRUPTS * 150.0e-3 + 0.5) // autodetect key repetition within 150 msec |
|
#define MIN_TOLERANCE_00 1.0 // -0% |
#define MAX_TOLERANCE_00 1.0 // +0% |
|
#define MIN_TOLERANCE_05 0.95 // -5% |
#define MAX_TOLERANCE_05 1.05 // +5% |
|
#define MIN_TOLERANCE_10 0.9 // -10% |
#define MAX_TOLERANCE_10 1.1 // +10% |
|
#define MIN_TOLERANCE_15 0.85 // -15% |
#define MAX_TOLERANCE_15 1.15 // +15% |
|
#define MIN_TOLERANCE_20 0.8 // -20% |
#define MAX_TOLERANCE_20 1.2 // +20% |
|
#define MIN_TOLERANCE_30 0.7 // -30% |
#define MAX_TOLERANCE_30 1.3 // +30% |
|
#define MIN_TOLERANCE_40 0.6 // -40% |
#define MAX_TOLERANCE_40 1.4 // +40% |
|
#define MIN_TOLERANCE_50 0.5 // -50% |
#define MAX_TOLERANCE_50 1.5 // +50% |
|
#define MIN_TOLERANCE_60 0.4 // -60% |
#define MAX_TOLERANCE_60 1.6 // +60% |
|
#define MIN_TOLERANCE_70 0.3 // -70% |
#define MAX_TOLERANCE_70 1.7 // +70% |
|
#define SIRCS_START_BIT_PULSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * SIRCS_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1) |
#define SIRCS_START_BIT_PULSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * SIRCS_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1) |
#define SIRCS_START_BIT_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * SIRCS_START_BIT_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1) |
#define SIRCS_START_BIT_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * SIRCS_START_BIT_PAUSE_TIME * MAX_TOLERANCE_05 + 0.5) + 1) // only 5% to avoid conflict with RC6 |
#define SIRCS_1_PULSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * SIRCS_1_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1) |
#define SIRCS_1_PULSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * SIRCS_1_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1) |
#define SIRCS_0_PULSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * SIRCS_0_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1) |
#define SIRCS_0_PULSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * SIRCS_0_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1) |
#define SIRCS_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * SIRCS_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1) |
#define SIRCS_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * SIRCS_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1) |
|
#define NEC_START_BIT_PULSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * NEC_START_BIT_PULSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1) |
#define NEC_START_BIT_PULSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * NEC_START_BIT_PULSE_TIME * MAX_TOLERANCE_40 + 0.5) + 1) |
#define NEC_START_BIT_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * NEC_START_BIT_PAUSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1) |
#define NEC_START_BIT_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * NEC_START_BIT_PAUSE_TIME * MAX_TOLERANCE_40 + 0.5) + 1) |
#define NEC_REPEAT_START_BIT_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * NEC_REPEAT_START_BIT_PAUSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1) |
#define NEC_REPEAT_START_BIT_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * NEC_REPEAT_START_BIT_PAUSE_TIME * MAX_TOLERANCE_40 + 0.5) + 1) |
#define NEC_PULSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * NEC_PULSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1) |
#define NEC_PULSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * NEC_PULSE_TIME * MAX_TOLERANCE_40 + 0.5) + 1) |
#define NEC_1_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * NEC_1_PAUSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1) |
#define NEC_1_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * NEC_1_PAUSE_TIME * MAX_TOLERANCE_40 + 0.5) + 1) |
#define NEC_0_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * NEC_0_PAUSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1) |
#define NEC_0_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * NEC_0_PAUSE_TIME * MAX_TOLERANCE_40 + 0.5) + 1) |
// autodetect nec repetition frame within 50 msec: |
// NEC seems to send the first repetition frame after 40ms, further repetition frames after 100 ms |
#if 0 |
#define NEC_FRAME_REPEAT_PAUSE_LEN_MAX (uint16_t)(F_INTERRUPTS * NEC_FRAME_REPEAT_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) |
#else |
#define NEC_FRAME_REPEAT_PAUSE_LEN_MAX (uint16_t)(F_INTERRUPTS * 100.0e-3 * MAX_TOLERANCE_20 + 0.5) |
#endif |
|
#define SAMSUNG_START_BIT_PULSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * SAMSUNG_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1) |
#define SAMSUNG_START_BIT_PULSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * SAMSUNG_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1) |
#define SAMSUNG_START_BIT_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * SAMSUNG_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1) |
#define SAMSUNG_START_BIT_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * SAMSUNG_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1) |
#define SAMSUNG_PULSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * SAMSUNG_PULSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1) |
#define SAMSUNG_PULSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * SAMSUNG_PULSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1) |
#define SAMSUNG_1_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * SAMSUNG_1_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1) |
#define SAMSUNG_1_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * SAMSUNG_1_PAUSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1) |
#define SAMSUNG_0_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * SAMSUNG_0_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1) |
#define SAMSUNG_0_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * SAMSUNG_0_PAUSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1) |
|
#define MATSUSHITA_START_BIT_PULSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * MATSUSHITA_START_BIT_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1) |
#define MATSUSHITA_START_BIT_PULSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * MATSUSHITA_START_BIT_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1) |
#define MATSUSHITA_START_BIT_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * MATSUSHITA_START_BIT_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1) |
#define MATSUSHITA_START_BIT_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * MATSUSHITA_START_BIT_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1) |
#define MATSUSHITA_PULSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * MATSUSHITA_PULSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1) |
#define MATSUSHITA_PULSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * MATSUSHITA_PULSE_TIME * MAX_TOLERANCE_40 + 0.5) + 1) |
#define MATSUSHITA_1_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * MATSUSHITA_1_PAUSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1) |
#define MATSUSHITA_1_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * MATSUSHITA_1_PAUSE_TIME * MAX_TOLERANCE_40 + 0.5) + 1) |
#define MATSUSHITA_0_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * MATSUSHITA_0_PAUSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1) |
#define MATSUSHITA_0_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * MATSUSHITA_0_PAUSE_TIME * MAX_TOLERANCE_40 + 0.5) + 1) |
|
#define KASEIKYO_START_BIT_PULSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * KASEIKYO_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1) |
#define KASEIKYO_START_BIT_PULSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * KASEIKYO_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1) |
#define KASEIKYO_START_BIT_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * KASEIKYO_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1) |
#define KASEIKYO_START_BIT_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * KASEIKYO_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1) |
#define KASEIKYO_PULSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * KASEIKYO_PULSE_TIME * MIN_TOLERANCE_50 + 0.5) - 1) |
#define KASEIKYO_PULSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * KASEIKYO_PULSE_TIME * MAX_TOLERANCE_50 + 0.5) + 1) |
#define KASEIKYO_1_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * KASEIKYO_1_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1) |
#define KASEIKYO_1_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * KASEIKYO_1_PAUSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1) |
#define KASEIKYO_0_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * KASEIKYO_0_PAUSE_TIME * MIN_TOLERANCE_50 + 0.5) - 1) |
#define KASEIKYO_0_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * KASEIKYO_0_PAUSE_TIME * MAX_TOLERANCE_50 + 0.5) + 1) |
|
#define RECS80_START_BIT_PULSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * RECS80_START_BIT_PULSE_TIME * MIN_TOLERANCE_00 + 0.5) - 1) |
#define RECS80_START_BIT_PULSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * RECS80_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1) |
#define RECS80_START_BIT_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * RECS80_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1) |
#define RECS80_START_BIT_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * RECS80_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1) |
#define RECS80_PULSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * RECS80_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1) |
#define RECS80_PULSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * RECS80_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1) |
#define RECS80_1_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * RECS80_1_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1) |
#define RECS80_1_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * RECS80_1_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1) |
#define RECS80_0_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * RECS80_0_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1) |
#define RECS80_0_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * RECS80_0_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1) |
|
#define RC5_START_BIT_LEN_MIN ((uint8_t)(F_INTERRUPTS * RC5_BIT_TIME * MIN_TOLERANCE_10 + 0.5) - 1) |
#define RC5_START_BIT_LEN_MAX ((uint8_t)(F_INTERRUPTS * RC5_BIT_TIME * MAX_TOLERANCE_10 + 0.5) + 1) |
#define RC5_BIT_LEN_MIN ((uint8_t)(F_INTERRUPTS * RC5_BIT_TIME * MIN_TOLERANCE_10 + 0.5) - 1) |
#define RC5_BIT_LEN_MAX ((uint8_t)(F_INTERRUPTS * RC5_BIT_TIME * MAX_TOLERANCE_10 + 0.5) + 1) |
|
#define DENON_PULSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * DENON_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1) |
#define DENON_PULSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * DENON_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1) |
#define DENON_1_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * DENON_1_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1) |
#define DENON_1_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * DENON_1_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1) |
#define DENON_0_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * DENON_0_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1) |
#define DENON_0_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * DENON_0_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1) |
|
#define RC6_START_BIT_PULSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * RC6_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1) |
#define RC6_START_BIT_PULSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * RC6_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1) |
#define RC6_START_BIT_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * RC6_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1) |
#define RC6_START_BIT_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * RC6_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1) |
#define RC6_TOGGLE_BIT_LEN_MIN ((uint8_t)(F_INTERRUPTS * RC6_TOGGLE_BIT_TIME * MIN_TOLERANCE_10 + 0.5) - 1) |
#define RC6_TOGGLE_BIT_LEN_MAX ((uint8_t)(F_INTERRUPTS * RC6_TOGGLE_BIT_TIME * MAX_TOLERANCE_10 + 0.5) + 1) |
#define RC6_BIT_PULSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * RC6_BIT_TIME * MIN_TOLERANCE_10 + 0.5) - 1) |
#define RC6_BIT_PULSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * RC6_BIT_TIME * MAX_TOLERANCE_30 + 0.5) + 1) // pulses: 300 - 700 |
#define RC6_BIT_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * RC6_BIT_TIME * MIN_TOLERANCE_10 + 0.5) - 1) // pauses: 300 - 600 |
#define RC6_BIT_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * RC6_BIT_TIME * MAX_TOLERANCE_10 + 0.5) + 1) |
|
#define RECS80EXT_START_BIT_PULSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * RECS80EXT_START_BIT_PULSE_TIME * MIN_TOLERANCE_00 + 0.5) - 1) |
#define RECS80EXT_START_BIT_PULSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * RECS80EXT_START_BIT_PULSE_TIME * MAX_TOLERANCE_00 + 0.5) + 1) |
#define RECS80EXT_START_BIT_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * RECS80EXT_START_BIT_PAUSE_TIME * MIN_TOLERANCE_05 + 0.5) - 1) |
#define RECS80EXT_START_BIT_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * RECS80EXT_START_BIT_PAUSE_TIME * MAX_TOLERANCE_05 + 0.5) + 1) |
#define RECS80EXT_PULSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * RECS80EXT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1) |
#define RECS80EXT_PULSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * RECS80EXT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1) |
#define RECS80EXT_1_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * RECS80EXT_1_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1) |
#define RECS80EXT_1_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * RECS80EXT_1_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1) |
#define RECS80EXT_0_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * RECS80EXT_0_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1) |
#define RECS80EXT_0_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * RECS80EXT_0_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1) |
|
#define NUBERT_START_BIT_PULSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * NUBERT_START_BIT_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1) |
#define NUBERT_START_BIT_PULSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * NUBERT_START_BIT_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1) |
#define NUBERT_START_BIT_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * NUBERT_START_BIT_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1) |
#define NUBERT_START_BIT_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * NUBERT_START_BIT_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1) |
#define NUBERT_1_PULSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * NUBERT_1_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1) |
#define NUBERT_1_PULSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * NUBERT_1_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1) |
#define NUBERT_1_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * NUBERT_1_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1) |
#define NUBERT_1_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * NUBERT_1_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1) |
#define NUBERT_0_PULSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * NUBERT_0_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1) |
#define NUBERT_0_PULSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * NUBERT_0_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1) |
#define NUBERT_0_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * NUBERT_0_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1) |
#define NUBERT_0_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * NUBERT_0_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1) |
|
#define BANG_OLUFSEN_START_BIT1_PULSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT1_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1) |
#define BANG_OLUFSEN_START_BIT1_PULSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT1_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1) |
#define BANG_OLUFSEN_START_BIT1_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT1_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1) |
#define BANG_OLUFSEN_START_BIT1_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT1_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1) |
#define BANG_OLUFSEN_START_BIT2_PULSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT2_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1) |
#define BANG_OLUFSEN_START_BIT2_PULSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT2_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1) |
#define BANG_OLUFSEN_START_BIT2_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT2_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1) |
#define BANG_OLUFSEN_START_BIT2_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT2_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1) |
#define BANG_OLUFSEN_START_BIT3_PULSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT3_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1) |
#define BANG_OLUFSEN_START_BIT3_PULSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT3_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1) |
#define BANG_OLUFSEN_START_BIT3_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT3_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1) |
#define BANG_OLUFSEN_START_BIT3_PAUSE_LEN_MAX ((PAUSE_LEN)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT3_PAUSE_TIME * MAX_TOLERANCE_05 + 0.5) + 1) // value must be below IRMP_TIMEOUT |
#define BANG_OLUFSEN_START_BIT4_PULSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT4_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1) |
#define BANG_OLUFSEN_START_BIT4_PULSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT4_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1) |
#define BANG_OLUFSEN_START_BIT4_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT4_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1) |
#define BANG_OLUFSEN_START_BIT4_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT4_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1) |
#define BANG_OLUFSEN_PULSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * BANG_OLUFSEN_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1) |
#define BANG_OLUFSEN_PULSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * BANG_OLUFSEN_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1) |
#define BANG_OLUFSEN_1_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * BANG_OLUFSEN_1_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1) |
#define BANG_OLUFSEN_1_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * BANG_OLUFSEN_1_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1) |
#define BANG_OLUFSEN_0_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * BANG_OLUFSEN_0_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1) |
#define BANG_OLUFSEN_0_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * BANG_OLUFSEN_0_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1) |
#define BANG_OLUFSEN_R_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * BANG_OLUFSEN_R_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1) |
#define BANG_OLUFSEN_R_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * BANG_OLUFSEN_R_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1) |
#define BANG_OLUFSEN_TRAILER_BIT_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * BANG_OLUFSEN_TRAILER_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1) |
#define BANG_OLUFSEN_TRAILER_BIT_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * BANG_OLUFSEN_TRAILER_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1) |
|
#define GRUNDIG_OR_NOKIA_START_BIT_LEN_MIN ((uint8_t)(F_INTERRUPTS * GRUNDIG_OR_NOKIA_BIT_TIME * MIN_TOLERANCE_20 + 0.5) - 1) |
#define GRUNDIG_OR_NOKIA_START_BIT_LEN_MAX ((uint8_t)(F_INTERRUPTS * GRUNDIG_OR_NOKIA_BIT_TIME * MAX_TOLERANCE_20 + 0.5) + 1) |
#define GRUNDIG_OR_NOKIA_BIT_LEN_MIN ((uint8_t)(F_INTERRUPTS * GRUNDIG_OR_NOKIA_BIT_TIME * MIN_TOLERANCE_20 + 0.5) - 1) |
#define GRUNDIG_OR_NOKIA_BIT_LEN_MAX ((uint8_t)(F_INTERRUPTS * GRUNDIG_OR_NOKIA_BIT_TIME * MAX_TOLERANCE_20 + 0.5) + 1) |
#define GRUNDIG_OR_NOKIA_PRE_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * GRUNDIG_OR_NOKIA_PRE_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) + 1) |
#define GRUNDIG_OR_NOKIA_PRE_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * GRUNDIG_OR_NOKIA_PRE_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1) |
|
#define SIEMENS_START_BIT_LEN_MIN ((uint8_t)(F_INTERRUPTS * SIEMENS_BIT_TIME * 1 + 0.5) - 1) |
#define SIEMENS_START_BIT_LEN_MAX ((uint8_t)(F_INTERRUPTS * SIEMENS_BIT_TIME * 1 + 0.5) + 1) |
#define SIEMENS_BIT_LEN_MIN ((uint8_t)(F_INTERRUPTS * SIEMENS_BIT_TIME * 1 + 0.5) - 1) |
#define SIEMENS_BIT_LEN_MAX ((uint8_t)(F_INTERRUPTS * SIEMENS_BIT_TIME * 1 + 0.5) + 1) |
|
#define FDC_START_BIT_PULSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * FDC_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1) |
#define FDC_START_BIT_PULSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * FDC_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1) |
#define FDC_START_BIT_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * FDC_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1) |
#define FDC_START_BIT_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * FDC_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1) |
#define FDC_PULSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * FDC_PULSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1) |
#define FDC_PULSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * FDC_PULSE_TIME * MAX_TOLERANCE_50 + 0.5) + 1) |
#define FDC_1_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * FDC_1_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1) |
#define FDC_1_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * FDC_1_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1) |
#if 0 |
#define FDC_0_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * FDC_0_PAUSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1) // could be negative: 255 |
#else |
#define FDC_0_PAUSE_LEN_MIN (1) // simply use 1 |
#endif |
#define FDC_0_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * FDC_0_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1) |
|
#define RCCAR_START_BIT_PULSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * RCCAR_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1) |
#define RCCAR_START_BIT_PULSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * RCCAR_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1) |
#define RCCAR_START_BIT_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * RCCAR_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1) |
#define RCCAR_START_BIT_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * RCCAR_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1) |
#define RCCAR_PULSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * RCCAR_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1) |
#define RCCAR_PULSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * RCCAR_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1) |
#define RCCAR_1_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * RCCAR_1_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1) |
#define RCCAR_1_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * RCCAR_1_PAUSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1) |
#define RCCAR_0_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * RCCAR_0_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1) |
#define RCCAR_0_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * RCCAR_0_PAUSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1) |
|
#define JVC_START_BIT_PULSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * JVC_START_BIT_PULSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1) |
#define JVC_START_BIT_PULSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * JVC_START_BIT_PULSE_TIME * MAX_TOLERANCE_40 + 0.5) + 1) |
#define JVC_REPEAT_START_BIT_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * (JVC_FRAME_REPEAT_PAUSE_TIME - IRMP_TIMEOUT_TIME) * MIN_TOLERANCE_40 + 0.5) - 1) // HACK! |
#define JVC_REPEAT_START_BIT_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * (JVC_FRAME_REPEAT_PAUSE_TIME - IRMP_TIMEOUT_TIME) * MAX_TOLERANCE_70 + 0.5) - 1) // HACK! |
#define JVC_PULSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * JVC_PULSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1) |
#define JVC_PULSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * JVC_PULSE_TIME * MAX_TOLERANCE_40 + 0.5) + 1) |
#define JVC_1_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * JVC_1_PAUSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1) |
#define JVC_1_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * JVC_1_PAUSE_TIME * MAX_TOLERANCE_40 + 0.5) + 1) |
#define JVC_0_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * JVC_0_PAUSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1) |
#define JVC_0_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * JVC_0_PAUSE_TIME * MAX_TOLERANCE_40 + 0.5) + 1) |
// autodetect JVC repetition frame within 50 msec: |
#define JVC_FRAME_REPEAT_PAUSE_LEN_MAX (uint16_t)(F_INTERRUPTS * JVC_FRAME_REPEAT_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) |
|
#define NIKON_START_BIT_PULSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * NIKON_START_BIT_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1) |
#define NIKON_START_BIT_PULSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * NIKON_START_BIT_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1) |
#define NIKON_START_BIT_PAUSE_LEN_MIN ((uint16_t)(F_INTERRUPTS * NIKON_START_BIT_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1) |
#define NIKON_START_BIT_PAUSE_LEN_MAX ((uint16_t)(F_INTERRUPTS * NIKON_START_BIT_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1) |
#define NIKON_REPEAT_START_BIT_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * NIKON_REPEAT_START_BIT_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1) |
#define NIKON_REPEAT_START_BIT_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * NIKON_REPEAT_START_BIT_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1) |
#define NIKON_PULSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * NIKON_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1) |
#define NIKON_PULSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * NIKON_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1) |
#define NIKON_1_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * NIKON_1_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1) |
#define NIKON_1_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * NIKON_1_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1) |
#define NIKON_0_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * NIKON_0_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1) |
#define NIKON_0_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * NIKON_0_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1) |
#define NIKON_FRAME_REPEAT_PAUSE_LEN_MAX (uint16_t)(F_INTERRUPTS * NIKON_FRAME_REPEAT_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) |
|
#define AUTO_FRAME_REPETITION_LEN (uint16_t)(F_INTERRUPTS * AUTO_FRAME_REPETITION_TIME + 0.5) // use uint16_t! |
|
#ifdef ANALYZE |
#define ANALYZE_PUTCHAR(a) { if (! silent) { putchar (a); } } |
#define ANALYZE_ONLY_NORMAL_PUTCHAR(a) { if (! silent && !verbose) { putchar (a); } } |
#define ANALYZE_PRINTF(...) { if (verbose) { printf (__VA_ARGS__); } } |
#define ANALYZE_NEWLINE() { if (verbose) { putchar ('\n'); } } |
static int silent; |
static int time_counter; |
static int verbose; |
#else |
#define ANALYZE_PUTCHAR(a) |
#define ANALYZE_ONLY_NORMAL_PUTCHAR(a) |
#define ANALYZE_PRINTF(...) |
#define ANALYZE_NEWLINE() |
#endif |
|
#if IRMP_LOGGING == 1 |
#define BAUD 9600L |
#include <util/setbaud.h> |
|
#ifdef UBRR0H |
|
#define UART0_UBRRH UBRR0H |
#define UART0_UBRRL UBRR0L |
#define UART0_UCSRA UCSR0A |
#define UART0_UCSRB UCSR0B |
#define UART0_UCSRC UCSR0C |
#define UART0_UDRE_BIT_VALUE (1<<UDRE0) |
#define UART0_UCSZ1_BIT_VALUE (1<<UCSZ01) |
#define UART0_UCSZ0_BIT_VALUE (1<<UCSZ00) |
#ifdef URSEL0 |
#define UART0_URSEL_BIT_VALUE (1<<URSEL0) |
#else |
#define UART0_URSEL_BIT_VALUE (0) |
#endif |
#define UART0_TXEN_BIT_VALUE (1<<TXEN0) |
#define UART0_UDR UDR0 |
#define UART0_U2X U2X0 |
|
#else |
|
#define UART0_UBRRH UBRRH |
#define UART0_UBRRL UBRRL |
#define UART0_UCSRA UCSRA |
#define UART0_UCSRB UCSRB |
#define UART0_UCSRC UCSRC |
#define UART0_UDRE_BIT_VALUE (1<<UDRE) |
#define UART0_UCSZ1_BIT_VALUE (1<<UCSZ1) |
#define UART0_UCSZ0_BIT_VALUE (1<<UCSZ0) |
#ifdef URSEL |
#define UART0_URSEL_BIT_VALUE (1<<URSEL) |
#else |
#define UART0_URSEL_BIT_VALUE (0) |
#endif |
#define UART0_TXEN_BIT_VALUE (1<<TXEN) |
#define UART0_UDR UDR |
#define UART0_U2X U2X |
|
#endif |
|
/*--------------------------------------------------------------------------------------------------------------------------------------------------- |
* Initialize UART |
* @details Initializes UART |
*--------------------------------------------------------------------------------------------------------------------------------------------------- |
*/ |
void |
irmp_uart_init (void) |
{ |
UART0_UBRRH = UBRRH_VALUE; // set baud rate |
UART0_UBRRL = UBRRL_VALUE; |
|
#if USE_2X |
UART0_UCSRA |= (1<<UART0_U2X); |
#else |
UART0_UCSRA &= ~(1<<UART0_U2X); |
#endif |
|
UART0_UCSRC = UART0_UCSZ1_BIT_VALUE | UART0_UCSZ0_BIT_VALUE | UART0_URSEL_BIT_VALUE; |
UART0_UCSRB |= UART0_TXEN_BIT_VALUE; // enable UART TX |
} |
|
/*--------------------------------------------------------------------------------------------------------------------------------------------------- |
* Send character |
* @details Sends character |
* @param ch character to be transmitted |
*--------------------------------------------------------------------------------------------------------------------------------------------------- |
*/ |
void |
irmp_uart_putc (unsigned char ch) |
{ |
while (!(UART0_UCSRA & UART0_UDRE_BIT_VALUE)) |
{ |
; |
} |
|
UART0_UDR = ch; |
} |
|
/*--------------------------------------------------------------------------------------------------------------------------------------------------- |
* Log IR signal |
*--------------------------------------------------------------------------------------------------------------------------------------------------- |
*/ |
|
#define STARTCYCLES 2 // min count of zeros before start of logging |
#define ENDBITS 1000 // number of sequenced highbits to detect end |
#define DATALEN 700 // log buffer size |
|
static void |
irmp_log (uint8_t val) |
{ |
static uint8_t buf[DATALEN]; // logging buffer |
static uint16_t buf_idx; // number of written bits |
static uint8_t startcycles; // current number of start-zeros |
static uint16_t cnt; // counts sequenced highbits - to detect end |
|
if (! val && (startcycles < STARTCYCLES) && !buf_idx) // prevent that single random zeros init logging |
{ |
startcycles++; |
} |
else |
{ |
startcycles = 0; |
|
if (! val || (val && buf_idx != 0)) // start or continue logging on "0", "1" cannot init logging |
{ |
if (buf_idx < DATALEN * 8) // index in range? |
{ // yes |
if (val) |
{ |
buf[(buf_idx / 8)] |= (1<<(buf_idx % 8)); // set bit |
} |
else |
{ |
buf[(buf_idx / 8)] &= ~(1<<(buf_idx % 8)); // reset bit |
} |
|
buf_idx++; |
} |
|
if (val) |
{ // if high received then look at log-stop condition |
cnt++; |
|
if (cnt > ENDBITS) |
{ // if stop condition is true, output on uart |
uint16_t i; |
|
for (i = 0; i < STARTCYCLES; i++) |
{ |
irmp_uart_putc ('0'); // the ignored starting zeros |
} |
|
for (i = 0; i < (buf_idx - ENDBITS + 20) / 8; i++) // transform bitset into uart chars |
{ |
uint8_t d = buf[i]; |
uint8_t j; |
|
for (j = 0; j < 8; j++) |
{ |
irmp_uart_putc ((d & 1) + '0'); |
d >>= 1; |
} |
} |
|
irmp_uart_putc ('\n'); |
buf_idx = 0; |
} |
} |
else |
{ |
cnt = 0; |
} |
} |
} |
} |
|
#else |
#define irmp_log(val) |
#endif |
|
typedef struct |
{ |
uint8_t protocol; // ir protocol |
uint8_t pulse_1_len_min; // minimum length of pulse with bit value 1 |
uint8_t pulse_1_len_max; // maximum length of pulse with bit value 1 |
uint8_t pause_1_len_min; // minimum length of pause with bit value 1 |
uint8_t pause_1_len_max; // maximum length of pause with bit value 1 |
uint8_t pulse_0_len_min; // minimum length of pulse with bit value 0 |
uint8_t pulse_0_len_max; // maximum length of pulse with bit value 0 |
uint8_t pause_0_len_min; // minimum length of pause with bit value 0 |
uint8_t pause_0_len_max; // maximum length of pause with bit value 0 |
uint8_t address_offset; // address offset |
uint8_t address_end; // end of address |
uint8_t command_offset; // command offset |
uint8_t command_end; // end of command |
uint8_t complete_len; // complete length of frame |
uint8_t stop_bit; // flag: frame has stop bit |
uint8_t lsb_first; // flag: LSB first |
uint8_t flags; // some flags |
} IRMP_PARAMETER; |
|
#if IRMP_SUPPORT_SIRCS_PROTOCOL == 1 |
|
static PROGMEM IRMP_PARAMETER sircs_param = |
{ |
IRMP_SIRCS_PROTOCOL, // protocol: ir protocol |
SIRCS_1_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1 |
SIRCS_1_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1 |
SIRCS_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1 |
SIRCS_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1 |
SIRCS_0_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0 |
SIRCS_0_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0 |
SIRCS_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0 |
SIRCS_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0 |
SIRCS_ADDRESS_OFFSET, // address_offset: address offset |
SIRCS_ADDRESS_OFFSET + SIRCS_ADDRESS_LEN, // address_end: end of address |
SIRCS_COMMAND_OFFSET, // command_offset: command offset |
SIRCS_COMMAND_OFFSET + SIRCS_COMMAND_LEN, // command_end: end of command |
SIRCS_COMPLETE_DATA_LEN, // complete_len: complete length of frame |
SIRCS_STOP_BIT, // stop_bit: flag: frame has stop bit |
SIRCS_LSB, // lsb_first: flag: LSB first |
SIRCS_FLAGS // flags: some flags |
}; |
|
#endif |
|
#if IRMP_SUPPORT_NEC_PROTOCOL == 1 |
|
static PROGMEM IRMP_PARAMETER nec_param = |
{ |
IRMP_NEC_PROTOCOL, // protocol: ir protocol |
NEC_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1 |
NEC_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1 |
NEC_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1 |
NEC_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1 |
NEC_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0 |
NEC_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0 |
NEC_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0 |
NEC_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0 |
NEC_ADDRESS_OFFSET, // address_offset: address offset |
NEC_ADDRESS_OFFSET + NEC_ADDRESS_LEN, // address_end: end of address |
NEC_COMMAND_OFFSET, // command_offset: command offset |
NEC_COMMAND_OFFSET + NEC_COMMAND_LEN, // command_end: end of command |
NEC_COMPLETE_DATA_LEN, // complete_len: complete length of frame |
NEC_STOP_BIT, // stop_bit: flag: frame has stop bit |
NEC_LSB, // lsb_first: flag: LSB first |
NEC_FLAGS // flags: some flags |
}; |
|
static PROGMEM IRMP_PARAMETER nec_rep_param = |
{ |
IRMP_NEC_PROTOCOL, // protocol: ir protocol |
NEC_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1 |
NEC_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1 |
NEC_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1 |
NEC_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1 |
NEC_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0 |
NEC_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0 |
NEC_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0 |
NEC_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0 |
0, // address_offset: address offset |
0, // address_end: end of address |
0, // command_offset: command offset |
0, // command_end: end of command |
0, // complete_len: complete length of frame |
NEC_STOP_BIT, // stop_bit: flag: frame has stop bit |
NEC_LSB, // lsb_first: flag: LSB first |
NEC_FLAGS // flags: some flags |
}; |
|
#endif |
|
#if IRMP_SUPPORT_SAMSUNG_PROTOCOL == 1 |
|
static PROGMEM IRMP_PARAMETER samsung_param = |
{ |
IRMP_SAMSUNG_PROTOCOL, // protocol: ir protocol |
SAMSUNG_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1 |
SAMSUNG_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1 |
SAMSUNG_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1 |
SAMSUNG_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1 |
SAMSUNG_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0 |
SAMSUNG_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0 |
SAMSUNG_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0 |
SAMSUNG_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0 |
SAMSUNG_ADDRESS_OFFSET, // address_offset: address offset |
SAMSUNG_ADDRESS_OFFSET + SAMSUNG_ADDRESS_LEN, // address_end: end of address |
SAMSUNG_COMMAND_OFFSET, // command_offset: command offset |
SAMSUNG_COMMAND_OFFSET + SAMSUNG_COMMAND_LEN, // command_end: end of command |
SAMSUNG_COMPLETE_DATA_LEN, // complete_len: complete length of frame |
SAMSUNG_STOP_BIT, // stop_bit: flag: frame has stop bit |
SAMSUNG_LSB, // lsb_first: flag: LSB first |
SAMSUNG_FLAGS // flags: some flags |
}; |
|
#endif |
|
#if IRMP_SUPPORT_MATSUSHITA_PROTOCOL == 1 |
|
static PROGMEM IRMP_PARAMETER matsushita_param = |
{ |
IRMP_MATSUSHITA_PROTOCOL, // protocol: ir protocol |
MATSUSHITA_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1 |
MATSUSHITA_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1 |
MATSUSHITA_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1 |
MATSUSHITA_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1 |
MATSUSHITA_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0 |
MATSUSHITA_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0 |
MATSUSHITA_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0 |
MATSUSHITA_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0 |
MATSUSHITA_ADDRESS_OFFSET, // address_offset: address offset |
MATSUSHITA_ADDRESS_OFFSET + MATSUSHITA_ADDRESS_LEN, // address_end: end of address |
MATSUSHITA_COMMAND_OFFSET, // command_offset: command offset |
MATSUSHITA_COMMAND_OFFSET + MATSUSHITA_COMMAND_LEN, // command_end: end of command |
MATSUSHITA_COMPLETE_DATA_LEN, // complete_len: complete length of frame |
MATSUSHITA_STOP_BIT, // stop_bit: flag: frame has stop bit |
MATSUSHITA_LSB, // lsb_first: flag: LSB first |
MATSUSHITA_FLAGS // flags: some flags |
}; |
|
#endif |
|
#if IRMP_SUPPORT_KASEIKYO_PROTOCOL == 1 |
|
static PROGMEM IRMP_PARAMETER kaseikyo_param = |
{ |
IRMP_KASEIKYO_PROTOCOL, // protocol: ir protocol |
KASEIKYO_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1 |
KASEIKYO_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1 |
KASEIKYO_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1 |
KASEIKYO_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1 |
KASEIKYO_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0 |
KASEIKYO_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0 |
KASEIKYO_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0 |
KASEIKYO_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0 |
KASEIKYO_ADDRESS_OFFSET, // address_offset: address offset |
KASEIKYO_ADDRESS_OFFSET + KASEIKYO_ADDRESS_LEN, // address_end: end of address |
KASEIKYO_COMMAND_OFFSET, // command_offset: command offset |
KASEIKYO_COMMAND_OFFSET + KASEIKYO_COMMAND_LEN, // command_end: end of command |
KASEIKYO_COMPLETE_DATA_LEN, // complete_len: complete length of frame |
KASEIKYO_STOP_BIT, // stop_bit: flag: frame has stop bit |
KASEIKYO_LSB, // lsb_first: flag: LSB first |
KASEIKYO_FLAGS // flags: some flags |
}; |
|
#endif |
|
#if IRMP_SUPPORT_RECS80_PROTOCOL == 1 |
|
static PROGMEM IRMP_PARAMETER recs80_param = |
{ |
IRMP_RECS80_PROTOCOL, // protocol: ir protocol |
RECS80_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1 |
RECS80_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1 |
RECS80_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1 |
RECS80_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1 |
RECS80_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0 |
RECS80_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0 |
RECS80_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0 |
RECS80_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0 |
RECS80_ADDRESS_OFFSET, // address_offset: address offset |
RECS80_ADDRESS_OFFSET + RECS80_ADDRESS_LEN, // address_end: end of address |
RECS80_COMMAND_OFFSET, // command_offset: command offset |
RECS80_COMMAND_OFFSET + RECS80_COMMAND_LEN, // command_end: end of command |
RECS80_COMPLETE_DATA_LEN, // complete_len: complete length of frame |
RECS80_STOP_BIT, // stop_bit: flag: frame has stop bit |
RECS80_LSB, // lsb_first: flag: LSB first |
RECS80_FLAGS // flags: some flags |
}; |
|
#endif |
|
#if IRMP_SUPPORT_RC5_PROTOCOL == 1 |
|
static PROGMEM IRMP_PARAMETER rc5_param = |
{ |
IRMP_RC5_PROTOCOL, // protocol: ir protocol |
RC5_BIT_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1 |
RC5_BIT_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1 |
RC5_BIT_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1 |
RC5_BIT_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1 |
1, // tricky: use this as stop bit length // pulse_0_len_min: minimum length of pulse with bit value 0 |
1, // pulse_0_len_max: maximum length of pulse with bit value 0 |
1, // pause_0_len_min: minimum length of pause with bit value 0 |
1, // pause_0_len_max: maximum length of pause with bit value 0 |
RC5_ADDRESS_OFFSET, // address_offset: address offset |
RC5_ADDRESS_OFFSET + RC5_ADDRESS_LEN, // address_end: end of address |
RC5_COMMAND_OFFSET, // command_offset: command offset |
RC5_COMMAND_OFFSET + RC5_COMMAND_LEN, // command_end: end of command |
RC5_COMPLETE_DATA_LEN, // complete_len: complete length of frame |
RC5_STOP_BIT, // stop_bit: flag: frame has stop bit |
RC5_LSB, // lsb_first: flag: LSB first |
RC5_FLAGS // flags: some flags |
}; |
|
#endif |
|
#if IRMP_SUPPORT_DENON_PROTOCOL == 1 |
|
static PROGMEM IRMP_PARAMETER denon_param = |
{ |
IRMP_DENON_PROTOCOL, // protocol: ir protocol |
DENON_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1 |
DENON_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1 |
DENON_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1 |
DENON_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1 |
DENON_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0 |
DENON_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0 |
DENON_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0 |
DENON_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0 |
DENON_ADDRESS_OFFSET, // address_offset: address offset |
DENON_ADDRESS_OFFSET + DENON_ADDRESS_LEN, // address_end: end of address |
DENON_COMMAND_OFFSET, // command_offset: command offset |
DENON_COMMAND_OFFSET + DENON_COMMAND_LEN, // command_end: end of command |
DENON_COMPLETE_DATA_LEN, // complete_len: complete length of frame |
DENON_STOP_BIT, // stop_bit: flag: frame has stop bit |
DENON_LSB, // lsb_first: flag: LSB first |
DENON_FLAGS // flags: some flags |
}; |
|
#endif |
|
#if IRMP_SUPPORT_RC6_PROTOCOL == 1 |
|
static PROGMEM IRMP_PARAMETER rc6_param = |
{ |
IRMP_RC6_PROTOCOL, // protocol: ir protocol |
RC6_BIT_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1 |
RC6_BIT_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1 |
RC6_BIT_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1 |
RC6_BIT_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1 |
1, // tricky: use this as stop bit length // pulse_0_len_min: minimum length of pulse with bit value 0 |
1, // pulse_0_len_max: maximum length of pulse with bit value 0 |
1, // pause_0_len_min: minimum length of pause with bit value 0 |
1, // pause_0_len_max: maximum length of pause with bit value 0 |
RC6_ADDRESS_OFFSET, // address_offset: address offset |
RC6_ADDRESS_OFFSET + RC6_ADDRESS_LEN, // address_end: end of address |
RC6_COMMAND_OFFSET, // command_offset: command offset |
RC6_COMMAND_OFFSET + RC6_COMMAND_LEN, // command_end: end of command |
RC6_COMPLETE_DATA_LEN_SHORT, // complete_len: complete length of frame |
RC6_STOP_BIT, // stop_bit: flag: frame has stop bit |
RC6_LSB, // lsb_first: flag: LSB first |
RC6_FLAGS // flags: some flags |
}; |
|
#endif |
|
#if IRMP_SUPPORT_RECS80EXT_PROTOCOL == 1 |
|
static PROGMEM IRMP_PARAMETER recs80ext_param = |
{ |
IRMP_RECS80EXT_PROTOCOL, // protocol: ir protocol |
RECS80EXT_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1 |
RECS80EXT_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1 |
RECS80EXT_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1 |
RECS80EXT_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1 |
RECS80EXT_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0 |
RECS80EXT_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0 |
RECS80EXT_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0 |
RECS80EXT_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0 |
RECS80EXT_ADDRESS_OFFSET, // address_offset: address offset |
RECS80EXT_ADDRESS_OFFSET + RECS80EXT_ADDRESS_LEN, // address_end: end of address |
RECS80EXT_COMMAND_OFFSET, // command_offset: command offset |
RECS80EXT_COMMAND_OFFSET + RECS80EXT_COMMAND_LEN, // command_end: end of command |
RECS80EXT_COMPLETE_DATA_LEN, // complete_len: complete length of frame |
RECS80EXT_STOP_BIT, // stop_bit: flag: frame has stop bit |
RECS80EXT_LSB, // lsb_first: flag: LSB first |
RECS80EXT_FLAGS // flags: some flags |
}; |
|
#endif |
|
#if IRMP_SUPPORT_NUBERT_PROTOCOL == 1 |
|
static PROGMEM IRMP_PARAMETER nubert_param = |
{ |
IRMP_NUBERT_PROTOCOL, // protocol: ir protocol |
NUBERT_1_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1 |
NUBERT_1_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1 |
NUBERT_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1 |
NUBERT_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1 |
NUBERT_0_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0 |
NUBERT_0_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0 |
NUBERT_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0 |
NUBERT_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0 |
NUBERT_ADDRESS_OFFSET, // address_offset: address offset |
NUBERT_ADDRESS_OFFSET + NUBERT_ADDRESS_LEN, // address_end: end of address |
NUBERT_COMMAND_OFFSET, // command_offset: command offset |
NUBERT_COMMAND_OFFSET + NUBERT_COMMAND_LEN, // command_end: end of command |
NUBERT_COMPLETE_DATA_LEN, // complete_len: complete length of frame |
NUBERT_STOP_BIT, // stop_bit: flag: frame has stop bit |
NUBERT_LSB, // lsb_first: flag: LSB first |
NUBERT_FLAGS // flags: some flags |
}; |
|
#endif |
|
#if IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL == 1 |
|
static PROGMEM IRMP_PARAMETER bang_olufsen_param = |
{ |
IRMP_BANG_OLUFSEN_PROTOCOL, // protocol: ir protocol |
BANG_OLUFSEN_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1 |
BANG_OLUFSEN_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1 |
BANG_OLUFSEN_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1 |
BANG_OLUFSEN_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1 |
BANG_OLUFSEN_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0 |
BANG_OLUFSEN_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0 |
BANG_OLUFSEN_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0 |
BANG_OLUFSEN_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0 |
BANG_OLUFSEN_ADDRESS_OFFSET, // address_offset: address offset |
BANG_OLUFSEN_ADDRESS_OFFSET + BANG_OLUFSEN_ADDRESS_LEN, // address_end: end of address |
BANG_OLUFSEN_COMMAND_OFFSET, // command_offset: command offset |
BANG_OLUFSEN_COMMAND_OFFSET + BANG_OLUFSEN_COMMAND_LEN, // command_end: end of command |
BANG_OLUFSEN_COMPLETE_DATA_LEN, // complete_len: complete length of frame |
BANG_OLUFSEN_STOP_BIT, // stop_bit: flag: frame has stop bit |
BANG_OLUFSEN_LSB, // lsb_first: flag: LSB first |
BANG_OLUFSEN_FLAGS // flags: some flags |
}; |
|
#endif |
|
#if IRMP_SUPPORT_GRUNDIG_OR_NOKIA_PROTOCOL == 1 |
|
static PROGMEM IRMP_PARAMETER grundig_param = |
{ |
IRMP_GRUNDIG_PROTOCOL, // protocol: ir protocol |
GRUNDIG_OR_NOKIA_BIT_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1 |
GRUNDIG_OR_NOKIA_BIT_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1 |
GRUNDIG_OR_NOKIA_BIT_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1 |
GRUNDIG_OR_NOKIA_BIT_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1 |
1, // tricky: use this as stop bit length // pulse_0_len_min: minimum length of pulse with bit value 0 |
1, // pulse_0_len_max: maximum length of pulse with bit value 0 |
1, // pause_0_len_min: minimum length of pause with bit value 0 |
1, // pause_0_len_max: maximum length of pause with bit value 0 |
GRUNDIG_ADDRESS_OFFSET, // address_offset: address offset |
GRUNDIG_ADDRESS_OFFSET + GRUNDIG_ADDRESS_LEN, // address_end: end of address |
GRUNDIG_COMMAND_OFFSET, // command_offset: command offset |
GRUNDIG_COMMAND_OFFSET + GRUNDIG_COMMAND_LEN + 1, // command_end: end of command (USE 1 bit MORE to STORE NOKIA DATA!) |
NOKIA_COMPLETE_DATA_LEN, // complete_len: complete length of frame, here: NOKIA instead of GRUNDIG! |
GRUNDIG_OR_NOKIA_STOP_BIT, // stop_bit: flag: frame has stop bit |
GRUNDIG_OR_NOKIA_LSB, // lsb_first: flag: LSB first |
GRUNDIG_OR_NOKIA_FLAGS // flags: some flags |
}; |
|
#endif |
|
#if IRMP_SUPPORT_SIEMENS_PROTOCOL == 1 |
|
static PROGMEM IRMP_PARAMETER siemens_param = |
{ |
IRMP_SIEMENS_PROTOCOL, // protocol: ir protocol |
SIEMENS_BIT_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1 |
SIEMENS_BIT_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1 |
SIEMENS_BIT_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1 |
SIEMENS_BIT_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1 |
1, // tricky: use this as stop bit length // pulse_0_len_min: minimum length of pulse with bit value 0 |
1, // pulse_0_len_max: maximum length of pulse with bit value 0 |
1, // pause_0_len_min: minimum length of pause with bit value 0 |
1, // pause_0_len_max: maximum length of pause with bit value 0 |
SIEMENS_ADDRESS_OFFSET, // address_offset: address offset |
SIEMENS_ADDRESS_OFFSET + SIEMENS_ADDRESS_LEN, // address_end: end of address |
SIEMENS_COMMAND_OFFSET, // command_offset: command offset |
SIEMENS_COMMAND_OFFSET + SIEMENS_COMMAND_LEN, // command_end: end of command |
SIEMENS_COMPLETE_DATA_LEN, // complete_len: complete length of frame |
SIEMENS_STOP_BIT, // stop_bit: flag: frame has stop bit |
SIEMENS_LSB, // lsb_first: flag: LSB first |
SIEMENS_FLAGS // flags: some flags |
}; |
|
#endif |
|
#if IRMP_SUPPORT_FDC_PROTOCOL == 1 |
|
static PROGMEM IRMP_PARAMETER fdc_param = |
{ |
IRMP_FDC_PROTOCOL, // protocol: ir protocol |
FDC_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1 |
FDC_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1 |
FDC_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1 |
FDC_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1 |
FDC_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0 |
FDC_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0 |
FDC_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0 |
FDC_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0 |
FDC_ADDRESS_OFFSET, // address_offset: address offset |
FDC_ADDRESS_OFFSET + FDC_ADDRESS_LEN, // address_end: end of address |
FDC_COMMAND_OFFSET, // command_offset: command offset |
FDC_COMMAND_OFFSET + FDC_COMMAND_LEN, // command_end: end of command |
FDC_COMPLETE_DATA_LEN, // complete_len: complete length of frame |
FDC_STOP_BIT, // stop_bit: flag: frame has stop bit |
FDC_LSB, // lsb_first: flag: LSB first |
FDC_FLAGS // flags: some flags |
}; |
|
#endif |
|
#if IRMP_SUPPORT_RCCAR_PROTOCOL == 1 |
|
static PROGMEM IRMP_PARAMETER rccar_param = |
{ |
IRMP_RCCAR_PROTOCOL, // protocol: ir protocol |
RCCAR_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1 |
RCCAR_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1 |
RCCAR_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1 |
RCCAR_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1 |
RCCAR_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0 |
RCCAR_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0 |
RCCAR_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0 |
RCCAR_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0 |
RCCAR_ADDRESS_OFFSET, // address_offset: address offset |
RCCAR_ADDRESS_OFFSET + RCCAR_ADDRESS_LEN, // address_end: end of address |
RCCAR_COMMAND_OFFSET, // command_offset: command offset |
RCCAR_COMMAND_OFFSET + RCCAR_COMMAND_LEN, // command_end: end of command |
RCCAR_COMPLETE_DATA_LEN, // complete_len: complete length of frame |
RCCAR_STOP_BIT, // stop_bit: flag: frame has stop bit |
RCCAR_LSB, // lsb_first: flag: LSB first |
RCCAR_FLAGS // flags: some flags |
}; |
|
#endif |
|
#if IRMP_SUPPORT_NIKON_PROTOCOL == 1 |
|
static PROGMEM IRMP_PARAMETER nikon_param = |
{ |
IRMP_NIKON_PROTOCOL, // protocol: ir protocol |
NIKON_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1 |
NIKON_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1 |
NIKON_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1 |
NIKON_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1 |
NIKON_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0 |
NIKON_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0 |
NIKON_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0 |
NIKON_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0 |
NIKON_ADDRESS_OFFSET, // address_offset: address offset |
NIKON_ADDRESS_OFFSET + NIKON_ADDRESS_LEN, // address_end: end of address |
NIKON_COMMAND_OFFSET, // command_offset: command offset |
NIKON_COMMAND_OFFSET + NIKON_COMMAND_LEN, // command_end: end of command |
NIKON_COMPLETE_DATA_LEN, // complete_len: complete length of frame |
NIKON_STOP_BIT, // stop_bit: flag: frame has stop bit |
NIKON_LSB, // lsb_first: flag: LSB first |
NIKON_FLAGS // flags: some flags |
}; |
|
#endif |
|
static uint8_t irmp_bit; // current bit position |
static IRMP_PARAMETER irmp_param; |
|
#if IRMP_SUPPORT_RC5_PROTOCOL == 1 && (IRMP_SUPPORT_FDC_PROTOCOL == 1 || IRMP_SUPPORT_RCCAR_PROTOCOL == 1) |
static IRMP_PARAMETER irmp_param2; |
#endif |
|
static volatile uint8_t irmp_ir_detected; |
static volatile uint8_t irmp_protocol; |
static volatile uint16_t irmp_address; |
static volatile uint16_t irmp_command; |
static volatile uint16_t irmp_id; // only used for SAMSUNG protocol |
static volatile uint8_t irmp_flags; |
|
#ifdef ANALYZE |
static uint8_t IRMP_PIN; |
#endif |
|
/*--------------------------------------------------------------------------------------------------------------------------------------------------- |
* Initialize IRMP decoder |
* @details Configures IRMP input pin |
*--------------------------------------------------------------------------------------------------------------------------------------------------- |
*/ |
#ifndef ANALYZE |
void |
irmp_init (void) |
{ |
#ifndef PIC_CCS_COMPILER |
IRMP_PORT &= ~(1<<IRMP_BIT); // deactivate pullup |
IRMP_DDR &= ~(1<<IRMP_BIT); // set pin to input |
#endif // PIC_CCS_COMPILER |
|
#if IRMP_LOGGING == 1 |
irmp_uart_init (); |
#endif |
} |
#endif |
/*--------------------------------------------------------------------------------------------------------------------------------------------------- |
* Get IRMP data |
* @details gets decoded IRMP data |
* @param pointer in order to store IRMP data |
* @return TRUE: successful, FALSE: failed |
*--------------------------------------------------------------------------------------------------------------------------------------------------- |
*/ |
uint8_t |
irmp_get_data (IRMP_DATA * irmp_data_p) |
{ |
uint8_t rtc = FALSE; |
|
if (irmp_ir_detected) |
{ |
switch (irmp_protocol) |
{ |
#if IRMP_SUPPORT_SAMSUNG_PROTOCOL == 1 |
case IRMP_SAMSUNG_PROTOCOL: |
if ((irmp_command >> 8) == (~irmp_command & 0x00FF)) |
{ |
irmp_command &= 0xff; |
irmp_command |= irmp_id << 8; |
rtc = TRUE; |
} |
break; |
#endif |
#if IRMP_SUPPORT_NEC_PROTOCOL == 1 |
case IRMP_NEC_PROTOCOL: |
if ((irmp_command >> 8) == (~irmp_command & 0x00FF)) |
{ |
irmp_command &= 0xff; |
rtc = TRUE; |
} |
else if (irmp_address == 0x87EE) |
{ |
ANALYZE_PRINTF ("Switching to APPLE protocol\n"); |
irmp_protocol = IRMP_APPLE_PROTOCOL; |
irmp_address = (irmp_command & 0xFF00) >> 8; |
irmp_command &= 0x00FF; |
rtc = TRUE; |
} |
break; |
#endif |
#if IRMP_SUPPORT_SIEMENS_PROTOCOL == 1 |
case IRMP_SIEMENS_PROTOCOL: |
if (((irmp_command >> 1) & 0x0001) == (~irmp_command & 0x0001)) |
{ |
irmp_command >>= 1; |
rtc = TRUE; |
} |
break; |
#endif |
#if IRMP_SUPPORT_RCCAR_PROTOCOL == 1 |
case IRMP_RCCAR_PROTOCOL: |
// frame in irmp_data: |
// Bit 12 11 10 9 8 7 6 5 4 3 2 1 0 |
// V D7 D6 D5 D4 D3 D2 D1 D0 A1 A0 C1 C0 // 10 9 8 7 6 5 4 3 2 1 0 |
irmp_address = (irmp_command & 0x000C) >> 2; // addr: 0 0 0 0 0 0 0 0 0 A1 A0 |
irmp_command = ((irmp_command & 0x1000) >> 2) | // V-Bit: V 0 0 0 0 0 0 0 0 0 0 |
((irmp_command & 0x0003) << 8) | // C-Bits: 0 C1 C0 0 0 0 0 0 0 0 0 |
((irmp_command & 0x0FF0) >> 4); // D-Bits: D7 D6 D5 D4 D3 D2 D1 D0 |
rtc = TRUE; // Summe: V C1 C0 D7 D6 D5 D4 D3 D2 D1 D0 |
break; |
#endif |
default: |
rtc = TRUE; |
} |
|
if (rtc) |
{ |
irmp_data_p->protocol = irmp_protocol; |
irmp_data_p->address = irmp_address; |
irmp_data_p->command = irmp_command; |
irmp_data_p->flags = irmp_flags; |
irmp_command = 0; |
irmp_address = 0; |
irmp_flags = 0; |
} |
|
irmp_ir_detected = FALSE; |
} |
|
return rtc; |
} |
|
// these statics must not be volatile, because they are only used by irmp_store_bit(), which is called by irmp_ISR() |
static uint16_t irmp_tmp_address; // ir address |
static uint16_t irmp_tmp_command; // ir command |
|
#if IRMP_SUPPORT_RC5_PROTOCOL == 1 && (IRMP_SUPPORT_FDC_PROTOCOL == 1 || IRMP_SUPPORT_RCCAR_PROTOCOL == 1) |
static uint16_t irmp_tmp_address2; // ir address |
static uint16_t irmp_tmp_command2; // ir command |
#endif |
|
#if IRMP_SUPPORT_SAMSUNG_PROTOCOL == 1 |
static uint16_t irmp_tmp_id; // ir id (only SAMSUNG) |
#endif |
#if IRMP_SUPPORT_KASEIKYO_PROTOCOL == 1 |
static uint8_t xor_check[6]; // check kaseikyo "parity" bits |
#endif |
|
static uint8_t irmp_bit; // current bit position |
|
/*--------------------------------------------------------------------------------------------------------------------------------------------------- |
* store bit |
* @details store bit in temp address or temp command |
* @param value to store: 0 or 1 |
*--------------------------------------------------------------------------------------------------------------------------------------------------- |
*/ |
// verhindert, dass irmp_store_bit() inline compiliert wird: |
// static void irmp_store_bit (uint8_t) __attribute__ ((noinline)); |
|
static void |
irmp_store_bit (uint8_t value) |
{ |
|
if (irmp_bit >= irmp_param.address_offset && irmp_bit < irmp_param.address_end) |
{ |
if (irmp_param.lsb_first) |
{ |
irmp_tmp_address |= (((uint16_t) (value)) << (irmp_bit - irmp_param.address_offset)); // CV wants cast |
} |
else |
{ |
irmp_tmp_address <<= 1; |
irmp_tmp_address |= value; |
} |
} |
else if (irmp_bit >= irmp_param.command_offset && irmp_bit < irmp_param.command_end) |
{ |
if (irmp_param.lsb_first) |
{ |
irmp_tmp_command |= (((uint16_t) (value)) << (irmp_bit - irmp_param.command_offset)); // CV wants cast |
} |
else |
{ |
irmp_tmp_command <<= 1; |
irmp_tmp_command |= value; |
} |
} |
|
#if IRMP_SUPPORT_SAMSUNG_PROTOCOL == 1 |
else if (irmp_param.protocol == IRMP_SAMSUNG_PROTOCOL && irmp_bit >= SAMSUNG_ID_OFFSET && irmp_bit < SAMSUNG_ID_OFFSET + SAMSUNG_ID_LEN) |
{ |
irmp_tmp_id |= (((uint16_t) (value)) << (irmp_bit - SAMSUNG_ID_OFFSET)); // store with LSB first |
} |
#endif |
|
#if IRMP_SUPPORT_KASEIKYO_PROTOCOL == 1 |
else if (irmp_param.protocol == IRMP_KASEIKYO_PROTOCOL && irmp_bit >= 20 && irmp_bit < 24) |
{ |
irmp_tmp_command |= (((uint16_t) (value)) << (irmp_bit - 8)); // store 4 system bits in upper nibble with LSB first |
} |
|
if (irmp_param.protocol == IRMP_KASEIKYO_PROTOCOL && irmp_bit < KASEIKYO_COMPLETE_DATA_LEN) |
{ |
if (value) |
{ |
xor_check[irmp_bit / 8] |= 1 << (irmp_bit % 8); |
} |
else |
{ |
xor_check[irmp_bit / 8] &= ~(1 << (irmp_bit % 8)); |
} |
} |
|
#endif |
|
irmp_bit++; |
} |
|
/*--------------------------------------------------------------------------------------------------------------------------------------------------- |
* store bit |
* @details store bit in temp address or temp command |
* @param value to store: 0 or 1 |
*--------------------------------------------------------------------------------------------------------------------------------------------------- |
*/ |
#if IRMP_SUPPORT_RC5_PROTOCOL == 1 && (IRMP_SUPPORT_FDC_PROTOCOL == 1 || IRMP_SUPPORT_RCCAR_PROTOCOL == 1) |
static void |
irmp_store_bit2 (uint8_t value) |
{ |
uint8_t irmp_bit2; |
|
if (irmp_param.protocol) |
{ |
irmp_bit2 = irmp_bit - 2; |
} |
else |
{ |
irmp_bit2 = irmp_bit - 1; |
} |
|
if (irmp_bit2 >= irmp_param2.address_offset && irmp_bit2 < irmp_param2.address_end) |
{ |
irmp_tmp_address2 |= (((uint16_t) (value)) << (irmp_bit2 - irmp_param2.address_offset)); // CV wants cast |
} |
else if (irmp_bit2 >= irmp_param2.command_offset && irmp_bit2 < irmp_param2.command_end) |
{ |
irmp_tmp_command2 |= (((uint16_t) (value)) << (irmp_bit2 - irmp_param2.command_offset)); // CV wants cast |
} |
} |
#endif // IRMP_SUPPORT_RC5_PROTOCOL == 1 && (IRMP_SUPPORT_FDC_PROTOCOL == 1 || IRMP_SUPPORT_RCCAR_PROTOCOL == 1) |
|
/*--------------------------------------------------------------------------------------------------------------------------------------------------- |
* ISR routine |
* @details ISR routine, called 10000 times per second |
*--------------------------------------------------------------------------------------------------------------------------------------------------- |
*/ |
uint8_t |
irmp_ISR (void) |
{ |
static uint8_t irmp_start_bit_detected; // flag: start bit detected |
static uint8_t wait_for_space; // flag: wait for data bit space |
static uint8_t wait_for_start_space; // flag: wait for start bit space |
static uint8_t irmp_pulse_time; // count bit time for pulse |
static PAUSE_LEN irmp_pause_time; // count bit time for pause |
static uint16_t last_irmp_address = 0xFFFF; // save last irmp address to recognize key repetition |
static uint16_t last_irmp_command = 0xFFFF; // save last irmp command to recognize key repetition |
static uint16_t repetition_len; // SIRCS repeats frame 2-5 times with 45 ms pause |
static uint8_t repetition_frame_number; |
#if IRMP_SUPPORT_DENON_PROTOCOL == 1 |
static uint16_t last_irmp_denon_command; // save last irmp command to recognize DENON frame repetition |
#endif |
#if IRMP_SUPPORT_RC5_PROTOCOL == 1 |
static uint8_t rc5_cmd_bit6; // bit 6 of RC5 command is the inverted 2nd start bit |
#endif |
#if IRMP_SUPPORT_MANCHESTER == 1 |
static PAUSE_LEN last_pause; // last pause value |
#endif |
#if IRMP_SUPPORT_MANCHESTER == 1 || IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL == 1 |
static uint8_t last_value; // last bit value |
#endif |
uint8_t irmp_input; // input value |
|
#ifdef ANALYZE |
time_counter++; |
#endif |
|
irmp_input = input(IRMP_PIN); |
|
irmp_log(irmp_input); // log ir signal, if IRMP_LOGGING defined |
|
if (! irmp_ir_detected) // ir code already detected? |
{ // no... |
if (! irmp_start_bit_detected) // start bit detected? |
{ // no... |
if (! irmp_input) // receiving burst? |
{ // yes... |
#ifdef ANALYZE |
if (! irmp_pulse_time) |
{ |
ANALYZE_PRINTF("%8d [starting pulse]\n", time_counter); |
} |
#endif |
irmp_pulse_time++; // increment counter |
} |
else |
{ // no... |
if (irmp_pulse_time) // it's dark.... |
{ // set flags for counting the time of darkness... |
irmp_start_bit_detected = 1; |
wait_for_start_space = 1; |
wait_for_space = 0; |
irmp_tmp_command = 0; |
irmp_tmp_address = 0; |
|
#if IRMP_SUPPORT_RC5_PROTOCOL == 1 && (IRMP_SUPPORT_FDC_PROTOCOL == 1 || IRMP_SUPPORT_RCCAR_PROTOCOL == 1) |
irmp_tmp_command2 = 0; |
irmp_tmp_address2 = 0; |
#endif |
|
irmp_bit = 0xff; |
irmp_pause_time = 1; // 1st pause: set to 1, not to 0! |
#if IRMP_SUPPORT_RC5_PROTOCOL == 1 |
rc5_cmd_bit6 = 0; // fm 2010-03-07: bugfix: reset it after incomplete RC5 frame! |
#endif |
} |
else |
{ |
if (repetition_len < 0xFFFF) // avoid overflow of counter |
{ |
repetition_len++; |
} |
} |
} |
} |
else |
{ |
if (wait_for_start_space) // we have received start bit... |
{ // ...and are counting the time of darkness |
if (irmp_input) // still dark? |
{ // yes |
irmp_pause_time++; // increment counter |
|
#if IRMP_SUPPORT_NIKON_PROTOCOL == 1 |
if (((irmp_pulse_time < NIKON_START_BIT_PULSE_LEN_MIN || irmp_pulse_time > NIKON_START_BIT_PULSE_LEN_MAX) && irmp_pause_time > IRMP_TIMEOUT_LEN) || |
irmp_pause_time > IRMP_TIMEOUT_NIKON_LEN) |
#else |
if (irmp_pause_time > IRMP_TIMEOUT_LEN) // timeout? |
#endif |
{ // yes... |
#if IRMP_SUPPORT_JVC_PROTOCOL == 1 |
if (irmp_protocol == IRMP_JVC_PROTOCOL) // don't show eror if JVC protocol, irmp_pulse_time has been set below! |
{ |
; |
} |
else |
#endif // IRMP_SUPPORT_JVC_PROTOCOL == 1 |
{ |
ANALYZE_PRINTF ("%8d error 1: pause after start bit pulse %d too long: %d\n", time_counter, irmp_pulse_time, irmp_pause_time); |
ANALYZE_ONLY_NORMAL_PUTCHAR ('\n'); |
} |
irmp_start_bit_detected = 0; // reset flags, let's wait for another start bit |
irmp_pulse_time = 0; |
irmp_pause_time = 0; |
} |
} |
else |
{ // receiving first data pulse! |
IRMP_PARAMETER * irmp_param_p = (IRMP_PARAMETER *) 0; |
|
#if IRMP_SUPPORT_RC5_PROTOCOL == 1 && (IRMP_SUPPORT_FDC_PROTOCOL == 1 || IRMP_SUPPORT_RCCAR_PROTOCOL == 1) |
irmp_param2.protocol = 0; |
#endif |
|
ANALYZE_PRINTF ("%8d [start-bit: pulse = %2d, pause = %2d]\n", time_counter, irmp_pulse_time, irmp_pause_time); |
|
#if IRMP_SUPPORT_SIRCS_PROTOCOL == 1 |
if (irmp_pulse_time >= SIRCS_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= SIRCS_START_BIT_PULSE_LEN_MAX && |
irmp_pause_time >= SIRCS_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= SIRCS_START_BIT_PAUSE_LEN_MAX) |
{ // it's SIRCS |
ANALYZE_PRINTF ("protocol = SIRCS, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n", |
SIRCS_START_BIT_PULSE_LEN_MIN, SIRCS_START_BIT_PULSE_LEN_MAX, |
SIRCS_START_BIT_PAUSE_LEN_MIN, SIRCS_START_BIT_PAUSE_LEN_MAX); |
irmp_param_p = (IRMP_PARAMETER *) (IRMP_PARAMETER *) &sircs_param; |
} |
else |
#endif // IRMP_SUPPORT_SIRCS_PROTOCOL == 1 |
|
#if IRMP_SUPPORT_JVC_PROTOCOL == 1 |
if (irmp_protocol == IRMP_JVC_PROTOCOL && // last protocol was JVC, awaiting repeat frame |
irmp_pulse_time >= JVC_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= JVC_START_BIT_PULSE_LEN_MAX && |
irmp_pause_time >= JVC_REPEAT_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= JVC_REPEAT_START_BIT_PAUSE_LEN_MAX) |
{ |
ANALYZE_PRINTF ("protocol = NEC or JVC repeat frame, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n", |
JVC_START_BIT_PULSE_LEN_MIN, JVC_START_BIT_PULSE_LEN_MAX, |
JVC_REPEAT_START_BIT_PAUSE_LEN_MIN, JVC_REPEAT_START_BIT_PAUSE_LEN_MAX); |
irmp_param_p = (IRMP_PARAMETER *) &nec_param; // tricky: use nec parameters |
} |
else |
#endif // IRMP_SUPPORT_JVC_PROTOCOL == 1 |
|
#if IRMP_SUPPORT_NEC_PROTOCOL == 1 |
if (irmp_pulse_time >= NEC_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= NEC_START_BIT_PULSE_LEN_MAX && |
irmp_pause_time >= NEC_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= NEC_START_BIT_PAUSE_LEN_MAX) |
{ |
ANALYZE_PRINTF ("protocol = NEC, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n", |
NEC_START_BIT_PULSE_LEN_MIN, NEC_START_BIT_PULSE_LEN_MAX, |
NEC_START_BIT_PAUSE_LEN_MIN, NEC_START_BIT_PAUSE_LEN_MAX); |
irmp_param_p = (IRMP_PARAMETER *) &nec_param; |
} |
else if (irmp_pulse_time >= NEC_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= NEC_START_BIT_PULSE_LEN_MAX && |
irmp_pause_time >= NEC_REPEAT_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= NEC_REPEAT_START_BIT_PAUSE_LEN_MAX) |
{ // it's NEC |
ANALYZE_PRINTF ("protocol = NEC (repetition frame), start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n", |
NEC_START_BIT_PULSE_LEN_MIN, NEC_START_BIT_PULSE_LEN_MAX, |
NEC_REPEAT_START_BIT_PAUSE_LEN_MIN, NEC_REPEAT_START_BIT_PAUSE_LEN_MAX); |
|
irmp_param_p = (IRMP_PARAMETER *) &nec_rep_param; |
} |
else |
#endif // IRMP_SUPPORT_NEC_PROTOCOL == 1 |
|
#if IRMP_SUPPORT_NIKON_PROTOCOL == 1 |
if (irmp_pulse_time >= NIKON_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= NIKON_START_BIT_PULSE_LEN_MAX && |
irmp_pause_time >= NIKON_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= NIKON_START_BIT_PAUSE_LEN_MAX) |
{ |
ANALYZE_PRINTF ("protocol = NIKON, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n", |
NIKON_START_BIT_PULSE_LEN_MIN, NIKON_START_BIT_PULSE_LEN_MAX, |
NIKON_START_BIT_PAUSE_LEN_MIN, NIKON_START_BIT_PAUSE_LEN_MAX); |
irmp_param_p = (IRMP_PARAMETER *) &nikon_param; |
} |
else |
#endif // IRMP_SUPPORT_NIKON_PROTOCOL == 1 |
|
#if IRMP_SUPPORT_SAMSUNG_PROTOCOL == 1 |
if (irmp_pulse_time >= SAMSUNG_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= SAMSUNG_START_BIT_PULSE_LEN_MAX && |
irmp_pause_time >= SAMSUNG_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= SAMSUNG_START_BIT_PAUSE_LEN_MAX) |
{ // it's SAMSUNG |
ANALYZE_PRINTF ("protocol = SAMSUNG, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n", |
SAMSUNG_START_BIT_PULSE_LEN_MIN, SAMSUNG_START_BIT_PULSE_LEN_MAX, |
SAMSUNG_START_BIT_PAUSE_LEN_MIN, SAMSUNG_START_BIT_PAUSE_LEN_MAX); |
irmp_param_p = (IRMP_PARAMETER *) &samsung_param; |
} |
else |
#endif // IRMP_SUPPORT_SAMSUNG_PROTOCOL == 1 |
|
#if IRMP_SUPPORT_MATSUSHITA_PROTOCOL == 1 |
if (irmp_pulse_time >= MATSUSHITA_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= MATSUSHITA_START_BIT_PULSE_LEN_MAX && |
irmp_pause_time >= MATSUSHITA_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= MATSUSHITA_START_BIT_PAUSE_LEN_MAX) |
{ // it's MATSUSHITA |
ANALYZE_PRINTF ("protocol = MATSUSHITA, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n", |
MATSUSHITA_START_BIT_PULSE_LEN_MIN, MATSUSHITA_START_BIT_PULSE_LEN_MAX, |
MATSUSHITA_START_BIT_PAUSE_LEN_MIN, MATSUSHITA_START_BIT_PAUSE_LEN_MAX); |
irmp_param_p = (IRMP_PARAMETER *) &matsushita_param; |
} |
else |
#endif // IRMP_SUPPORT_MATSUSHITA_PROTOCOL == 1 |
|
#if IRMP_SUPPORT_KASEIKYO_PROTOCOL == 1 |
if (irmp_pulse_time >= KASEIKYO_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= KASEIKYO_START_BIT_PULSE_LEN_MAX && |
irmp_pause_time >= KASEIKYO_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= KASEIKYO_START_BIT_PAUSE_LEN_MAX) |
{ // it's KASEIKYO |
ANALYZE_PRINTF ("protocol = KASEIKYO, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n", |
KASEIKYO_START_BIT_PULSE_LEN_MIN, KASEIKYO_START_BIT_PULSE_LEN_MAX, |
KASEIKYO_START_BIT_PAUSE_LEN_MIN, KASEIKYO_START_BIT_PAUSE_LEN_MAX); |
irmp_param_p = (IRMP_PARAMETER *) &kaseikyo_param; |
} |
else |
#endif // IRMP_SUPPORT_KASEIKYO_PROTOCOL == 1 |
|
#if IRMP_SUPPORT_RECS80_PROTOCOL == 1 |
if (irmp_pulse_time >= RECS80_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= RECS80_START_BIT_PULSE_LEN_MAX && |
irmp_pause_time >= RECS80_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= RECS80_START_BIT_PAUSE_LEN_MAX) |
{ // it's RECS80 |
ANALYZE_PRINTF ("protocol = RECS80, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n", |
RECS80_START_BIT_PULSE_LEN_MIN, RECS80_START_BIT_PULSE_LEN_MAX, |
RECS80_START_BIT_PAUSE_LEN_MIN, RECS80_START_BIT_PAUSE_LEN_MAX); |
irmp_param_p = (IRMP_PARAMETER *) &recs80_param; |
} |
else |
#endif // IRMP_SUPPORT_RECS80_PROTOCOL == 1 |
|
#if IRMP_SUPPORT_RC5_PROTOCOL == 1 |
if (((irmp_pulse_time >= RC5_START_BIT_LEN_MIN && irmp_pulse_time <= RC5_START_BIT_LEN_MAX) || |
(irmp_pulse_time >= 2 * RC5_START_BIT_LEN_MIN && irmp_pulse_time <= 2 * RC5_START_BIT_LEN_MAX)) && |
((irmp_pause_time >= RC5_START_BIT_LEN_MIN && irmp_pause_time <= RC5_START_BIT_LEN_MAX) || |
(irmp_pause_time >= 2 * RC5_START_BIT_LEN_MIN && irmp_pause_time <= 2 * RC5_START_BIT_LEN_MAX))) |
{ // it's RC5 |
#if IRMP_SUPPORT_FDC_PROTOCOL == 1 |
if (irmp_pulse_time >= FDC_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= FDC_START_BIT_PULSE_LEN_MAX && |
irmp_pause_time >= FDC_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= FDC_START_BIT_PAUSE_LEN_MAX) |
{ |
ANALYZE_PRINTF ("protocol = RC5 or FDC\n"); |
ANALYZE_PRINTF ("FDC start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n", |
FDC_START_BIT_PULSE_LEN_MIN, FDC_START_BIT_PULSE_LEN_MAX, |
FDC_START_BIT_PAUSE_LEN_MIN, FDC_START_BIT_PAUSE_LEN_MAX); |
ANALYZE_PRINTF ("RC5 start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n", |
RC5_START_BIT_LEN_MIN, RC5_START_BIT_LEN_MAX, |
RC5_START_BIT_LEN_MIN, RC5_START_BIT_LEN_MAX); |
memcpy_P (&irmp_param2, &fdc_param, sizeof (IRMP_PARAMETER)); |
} |
else |
#endif // IRMP_SUPPORT_FDC_PROTOCOL == 1 |
#if IRMP_SUPPORT_RCCAR_PROTOCOL == 1 |
if (irmp_pulse_time >= RCCAR_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= RCCAR_START_BIT_PULSE_LEN_MAX && |
irmp_pause_time >= RCCAR_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= RCCAR_START_BIT_PAUSE_LEN_MAX) |
{ |
ANALYZE_PRINTF ("protocol = RC5 or RCCAR\n"); |
ANALYZE_PRINTF ("RCCAR start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n", |
RCCAR_START_BIT_PULSE_LEN_MIN, RCCAR_START_BIT_PULSE_LEN_MAX, |
RCCAR_START_BIT_PAUSE_LEN_MIN, RCCAR_START_BIT_PAUSE_LEN_MAX); |
ANALYZE_PRINTF ("RC5 start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n", |
RC5_START_BIT_LEN_MIN, RC5_START_BIT_LEN_MAX, |
RC5_START_BIT_LEN_MIN, RC5_START_BIT_LEN_MAX); |
memcpy_P (&irmp_param2, &rccar_param, sizeof (IRMP_PARAMETER)); |
} |
else |
#endif // IRMP_SUPPORT_RCCAR_PROTOCOL == 1 |
{ |
ANALYZE_PRINTF ("protocol = RC5, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n", |
RC5_START_BIT_LEN_MIN, RC5_START_BIT_LEN_MAX, |
RC5_START_BIT_LEN_MIN, RC5_START_BIT_LEN_MAX); |
} |
|
irmp_param_p = (IRMP_PARAMETER *) &rc5_param; |
last_pause = irmp_pause_time; |
|
if ((irmp_pulse_time > RC5_START_BIT_LEN_MAX && irmp_pulse_time <= 2 * RC5_START_BIT_LEN_MAX) || |
(irmp_pause_time > RC5_START_BIT_LEN_MAX && irmp_pause_time <= 2 * RC5_START_BIT_LEN_MAX)) |
{ |
last_value = 0; |
rc5_cmd_bit6 = 1<<6; |
} |
else |
{ |
last_value = 1; |
} |
} |
else |
#endif // IRMP_SUPPORT_RC5_PROTOCOL == 1 |
|
#if IRMP_SUPPORT_DENON_PROTOCOL == 1 |
if ( (irmp_pulse_time >= DENON_PULSE_LEN_MIN && irmp_pulse_time <= DENON_PULSE_LEN_MAX) && |
((irmp_pause_time >= DENON_1_PAUSE_LEN_MIN && irmp_pause_time <= DENON_1_PAUSE_LEN_MAX) || |
(irmp_pause_time >= DENON_0_PAUSE_LEN_MIN && irmp_pause_time <= DENON_0_PAUSE_LEN_MAX))) |
{ // it's DENON |
ANALYZE_PRINTF ("protocol = DENON, start bit timings: pulse: %3d - %3d, pause: %3d - %3d or %3d - %3d\n", |
DENON_PULSE_LEN_MIN, DENON_PULSE_LEN_MAX, |
DENON_1_PAUSE_LEN_MIN, DENON_1_PAUSE_LEN_MAX, |
DENON_0_PAUSE_LEN_MIN, DENON_0_PAUSE_LEN_MAX); |
irmp_param_p = (IRMP_PARAMETER *) &denon_param; |
} |
else |
#endif // IRMP_SUPPORT_DENON_PROTOCOL == 1 |
|
#if IRMP_SUPPORT_RC6_PROTOCOL == 1 |
if (irmp_pulse_time >= RC6_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= RC6_START_BIT_PULSE_LEN_MAX && |
irmp_pause_time >= RC6_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= RC6_START_BIT_PAUSE_LEN_MAX) |
{ // it's RC6 |
ANALYZE_PRINTF ("protocol = RC6, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n", |
RC6_START_BIT_PULSE_LEN_MIN, RC6_START_BIT_PULSE_LEN_MAX, |
RC6_START_BIT_PAUSE_LEN_MIN, RC6_START_BIT_PAUSE_LEN_MAX); |
irmp_param_p = (IRMP_PARAMETER *) &rc6_param; |
last_pause = 0; |
last_value = 1; |
} |
else |
#endif // IRMP_SUPPORT_RC6_PROTOCOL == 1 |
|
#if IRMP_SUPPORT_RECS80EXT_PROTOCOL == 1 |
if (irmp_pulse_time >= RECS80EXT_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= RECS80EXT_START_BIT_PULSE_LEN_MAX && |
irmp_pause_time >= RECS80EXT_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= RECS80EXT_START_BIT_PAUSE_LEN_MAX) |
{ // it's RECS80EXT |
ANALYZE_PRINTF ("protocol = RECS80EXT, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n", |
RECS80EXT_START_BIT_PULSE_LEN_MIN, RECS80EXT_START_BIT_PULSE_LEN_MAX, |
RECS80EXT_START_BIT_PAUSE_LEN_MIN, RECS80EXT_START_BIT_PAUSE_LEN_MAX); |
irmp_param_p = (IRMP_PARAMETER *) &recs80ext_param; |
} |
else |
#endif // IRMP_SUPPORT_RECS80EXT_PROTOCOL == 1 |
|
#if IRMP_SUPPORT_NUBERT_PROTOCOL == 1 |
if (irmp_pulse_time >= NUBERT_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= NUBERT_START_BIT_PULSE_LEN_MAX && |
irmp_pause_time >= NUBERT_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= NUBERT_START_BIT_PAUSE_LEN_MAX) |
{ // it's NUBERT |
ANALYZE_PRINTF ("protocol = NUBERT, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n", |
NUBERT_START_BIT_PULSE_LEN_MIN, NUBERT_START_BIT_PULSE_LEN_MAX, |
NUBERT_START_BIT_PAUSE_LEN_MIN, NUBERT_START_BIT_PAUSE_LEN_MAX); |
irmp_param_p = (IRMP_PARAMETER *) &nubert_param; |
} |
else |
#endif // IRMP_SUPPORT_NUBERT_PROTOCOL == 1 |
|
#if IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL == 1 |
if (irmp_pulse_time >= BANG_OLUFSEN_START_BIT1_PULSE_LEN_MIN && irmp_pulse_time <= BANG_OLUFSEN_START_BIT1_PULSE_LEN_MAX && |
irmp_pause_time >= BANG_OLUFSEN_START_BIT1_PAUSE_LEN_MIN && irmp_pause_time <= BANG_OLUFSEN_START_BIT1_PAUSE_LEN_MAX) |
{ // it's BANG_OLUFSEN |
ANALYZE_PRINTF ("protocol = BANG_OLUFSEN\n"); |
ANALYZE_PRINTF ("start bit 1 timings: pulse: %3d - %3d, pause: %3d - %3d\n", |
BANG_OLUFSEN_START_BIT1_PULSE_LEN_MIN, BANG_OLUFSEN_START_BIT1_PULSE_LEN_MAX, |
BANG_OLUFSEN_START_BIT1_PAUSE_LEN_MIN, BANG_OLUFSEN_START_BIT1_PAUSE_LEN_MAX); |
ANALYZE_PRINTF ("start bit 2 timings: pulse: %3d - %3d, pause: %3d - %3d\n", |
BANG_OLUFSEN_START_BIT2_PULSE_LEN_MIN, BANG_OLUFSEN_START_BIT2_PULSE_LEN_MAX, |
BANG_OLUFSEN_START_BIT2_PAUSE_LEN_MIN, BANG_OLUFSEN_START_BIT2_PAUSE_LEN_MAX); |
ANALYZE_PRINTF ("start bit 3 timings: pulse: %3d - %3d, pause: %3d - %3d\n", |
BANG_OLUFSEN_START_BIT3_PULSE_LEN_MIN, BANG_OLUFSEN_START_BIT3_PULSE_LEN_MAX, |
BANG_OLUFSEN_START_BIT3_PAUSE_LEN_MIN, BANG_OLUFSEN_START_BIT3_PAUSE_LEN_MAX); |
ANALYZE_PRINTF ("start bit 4 timings: pulse: %3d - %3d, pause: %3d - %3d\n", |
BANG_OLUFSEN_START_BIT4_PULSE_LEN_MIN, BANG_OLUFSEN_START_BIT4_PULSE_LEN_MAX, |
BANG_OLUFSEN_START_BIT4_PAUSE_LEN_MIN, BANG_OLUFSEN_START_BIT4_PAUSE_LEN_MAX); |
irmp_param_p = (IRMP_PARAMETER *) &bang_olufsen_param; |
last_value = 0; |
} |
else |
#endif // IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL == 1 |
|
#if IRMP_SUPPORT_GRUNDIG_OR_NOKIA_PROTOCOL == 1 |
if (irmp_pulse_time >= GRUNDIG_OR_NOKIA_START_BIT_LEN_MIN && irmp_pulse_time <= GRUNDIG_OR_NOKIA_START_BIT_LEN_MAX && |
irmp_pause_time >= GRUNDIG_OR_NOKIA_PRE_PAUSE_LEN_MIN && irmp_pause_time <= GRUNDIG_OR_NOKIA_PRE_PAUSE_LEN_MAX) |
{ // it's GRUNDIG |
ANALYZE_PRINTF ("protocol = GRUNDIG, pre bit timings: pulse: %3d - %3d, pause: %3d - %3d\n", |
GRUNDIG_OR_NOKIA_START_BIT_LEN_MIN, GRUNDIG_OR_NOKIA_START_BIT_LEN_MAX, |
GRUNDIG_OR_NOKIA_PRE_PAUSE_LEN_MIN, GRUNDIG_OR_NOKIA_PRE_PAUSE_LEN_MAX); |
irmp_param_p = (IRMP_PARAMETER *) &grundig_param; |
last_pause = irmp_pause_time; |
last_value = 1; |
} |
else |
#endif // IRMP_SUPPORT_GRUNDIG_OR_NOKIA_PROTOCOL == 1 |
|
#if IRMP_SUPPORT_SIEMENS_PROTOCOL == 1 |
if (((irmp_pulse_time >= SIEMENS_START_BIT_LEN_MIN && irmp_pulse_time <= SIEMENS_START_BIT_LEN_MAX) || |
(irmp_pulse_time >= 2 * SIEMENS_START_BIT_LEN_MIN && irmp_pulse_time <= 2 * SIEMENS_START_BIT_LEN_MAX)) && |
((irmp_pause_time >= SIEMENS_START_BIT_LEN_MIN && irmp_pause_time <= SIEMENS_START_BIT_LEN_MAX) || |
(irmp_pause_time >= 2 * SIEMENS_START_BIT_LEN_MIN && irmp_pause_time <= 2 * SIEMENS_START_BIT_LEN_MAX))) |
{ // it's SIEMENS |
ANALYZE_PRINTF ("protocol = SIEMENS, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n", |
SIEMENS_START_BIT_LEN_MIN, SIEMENS_START_BIT_LEN_MAX, |
SIEMENS_START_BIT_LEN_MIN, SIEMENS_START_BIT_LEN_MAX); |
irmp_param_p = (IRMP_PARAMETER *) &siemens_param; |
last_pause = irmp_pause_time; |
last_value = 1; |
} |
else |
#endif // IRMP_SUPPORT_SIEMENS_PROTOCOL == 1 |
#if IRMP_SUPPORT_FDC_PROTOCOL == 1 |
if (irmp_pulse_time >= FDC_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= FDC_START_BIT_PULSE_LEN_MAX && |
irmp_pause_time >= FDC_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= FDC_START_BIT_PAUSE_LEN_MAX) |
{ |
ANALYZE_PRINTF ("protocol = FDC, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n", |
FDC_START_BIT_PULSE_LEN_MIN, FDC_START_BIT_PULSE_LEN_MAX, |
FDC_START_BIT_PAUSE_LEN_MIN, FDC_START_BIT_PAUSE_LEN_MAX); |
irmp_param_p = (IRMP_PARAMETER *) &fdc_param; |
} |
else |
#endif // IRMP_SUPPORT_FDC_PROTOCOL == 1 |
#if IRMP_SUPPORT_RCCAR_PROTOCOL == 1 |
if (irmp_pulse_time >= RCCAR_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= RCCAR_START_BIT_PULSE_LEN_MAX && |
irmp_pause_time >= RCCAR_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= RCCAR_START_BIT_PAUSE_LEN_MAX) |
{ |
ANALYZE_PRINTF ("protocol = RCCAR, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n", |
RCCAR_START_BIT_PULSE_LEN_MIN, RCCAR_START_BIT_PULSE_LEN_MAX, |
RCCAR_START_BIT_PAUSE_LEN_MIN, RCCAR_START_BIT_PAUSE_LEN_MAX); |
irmp_param_p = (IRMP_PARAMETER *) &rccar_param; |
} |
else |
#endif // IRMP_SUPPORT_RCCAR_PROTOCOL == 1 |
{ |
ANALYZE_PRINTF ("protocol = UNKNOWN\n"); |
irmp_start_bit_detected = 0; // wait for another start bit... |
} |
|
if (irmp_start_bit_detected) |
{ |
memcpy_P (&irmp_param, irmp_param_p, sizeof (IRMP_PARAMETER)); |
|
#ifdef ANALYZE |
if (! (irmp_param.flags & IRMP_PARAM_FLAG_IS_MANCHESTER)) |
{ |
ANALYZE_PRINTF ("pulse_1: %3d - %3d\n", irmp_param.pulse_1_len_min, irmp_param.pulse_1_len_max); |
ANALYZE_PRINTF ("pause_1: %3d - %3d\n", irmp_param.pause_1_len_min, irmp_param.pause_1_len_max); |
} |
else |
{ |
ANALYZE_PRINTF ("pulse: %3d - %3d or %3d - %3d\n", irmp_param.pulse_1_len_min, irmp_param.pulse_1_len_max, |
irmp_param.pulse_1_len_max + 1, 2 * irmp_param.pulse_1_len_max); |
ANALYZE_PRINTF ("pause: %3d - %3d or %3d - %3d\n", irmp_param.pause_1_len_min, irmp_param.pause_1_len_max, |
irmp_param.pause_1_len_max + 1, 2 * irmp_param.pause_1_len_max); |
} |
|
#if IRMP_SUPPORT_RC5_PROTOCOL == 1 && (IRMP_SUPPORT_FDC_PROTOCOL == 1 || IRMP_SUPPORT_RCCAR_PROTOCOL == 1) |
if (irmp_param2.protocol) |
{ |
ANALYZE_PRINTF ("pulse_0: %3d - %3d\n", irmp_param2.pulse_0_len_min, irmp_param2.pulse_0_len_max); |
ANALYZE_PRINTF ("pause_0: %3d - %3d\n", irmp_param2.pause_0_len_min, irmp_param2.pause_0_len_max); |
ANALYZE_PRINTF ("pulse_1: %3d - %3d\n", irmp_param2.pulse_1_len_min, irmp_param2.pulse_1_len_max); |
ANALYZE_PRINTF ("pause_1: %3d - %3d\n", irmp_param2.pause_1_len_min, irmp_param2.pause_1_len_max); |
} |
#endif |
|
|
#if IRMP_SUPPORT_RC6_PROTOCOL == 1 |
if (irmp_param.protocol == IRMP_RC6_PROTOCOL) |
{ |
ANALYZE_PRINTF ("pulse_toggle: %3d - %3d\n", RC6_TOGGLE_BIT_LEN_MIN, RC6_TOGGLE_BIT_LEN_MAX); |
} |
#endif |
|
if (! (irmp_param.flags & IRMP_PARAM_FLAG_IS_MANCHESTER)) |
{ |
ANALYZE_PRINTF ("pulse_0: %3d - %3d\n", irmp_param.pulse_0_len_min, irmp_param.pulse_0_len_max); |
ANALYZE_PRINTF ("pause_0: %3d - %3d\n", irmp_param.pause_0_len_min, irmp_param.pause_0_len_max); |
} |
|
#if IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL == 1 |
if (irmp_param.protocol == IRMP_BANG_OLUFSEN_PROTOCOL) |
{ |
ANALYZE_PRINTF ("pulse_r: %3d - %3d\n", irmp_param.pulse_0_len_min, irmp_param.pulse_0_len_max); |
ANALYZE_PRINTF ("pause_r: %3d - %3d\n", BANG_OLUFSEN_R_PAUSE_LEN_MIN, BANG_OLUFSEN_R_PAUSE_LEN_MAX); |
} |
#endif |
|
ANALYZE_PRINTF ("command_offset: %2d\n", irmp_param.command_offset); |
ANALYZE_PRINTF ("command_len: %3d\n", irmp_param.command_end - irmp_param.command_offset); |
ANALYZE_PRINTF ("complete_len: %3d\n", irmp_param.complete_len); |
ANALYZE_PRINTF ("stop_bit: %3d\n", irmp_param.stop_bit); |
#endif // ANALYZE |
} |
|
irmp_bit = 0; |
|
#if IRMP_SUPPORT_MANCHESTER == 1 |
if ((irmp_param.flags & IRMP_PARAM_FLAG_IS_MANCHESTER) && irmp_param.protocol != IRMP_RC6_PROTOCOL) // Manchester, but not RC6 |
{ |
if (irmp_pause_time > irmp_param.pulse_1_len_max && irmp_pause_time <= 2 * irmp_param.pulse_1_len_max) |
{ |
ANALYZE_PRINTF ("%8d [bit %2d: pulse = %3d, pause = %3d] ", time_counter, irmp_bit, irmp_pulse_time, irmp_pause_time); |
ANALYZE_PUTCHAR ((irmp_param.flags & IRMP_PARAM_FLAG_1ST_PULSE_IS_1) ? '0' : '1'); |
ANALYZE_NEWLINE (); |
irmp_store_bit ((irmp_param.flags & IRMP_PARAM_FLAG_1ST_PULSE_IS_1) ? 0 : 1); |
} |
else if (! last_value) // && irmp_pause_time >= irmp_param.pause_1_len_min && irmp_pause_time <= irmp_param.pause_1_len_max) |
{ |
ANALYZE_PRINTF ("%8d [bit %2d: pulse = %3d, pause = %3d] ", time_counter, irmp_bit, irmp_pulse_time, irmp_pause_time); |
|
ANALYZE_PUTCHAR ((irmp_param.flags & IRMP_PARAM_FLAG_1ST_PULSE_IS_1) ? '1' : '0'); |
ANALYZE_NEWLINE (); |
irmp_store_bit ((irmp_param.flags & IRMP_PARAM_FLAG_1ST_PULSE_IS_1) ? 1 : 0); |
} |
} |
else |
#endif // IRMP_SUPPORT_MANCHESTER == 1 |
|
#if IRMP_SUPPORT_DENON_PROTOCOL == 1 |
if (irmp_param.protocol == IRMP_DENON_PROTOCOL) |
{ |
ANALYZE_PRINTF ("%8d [bit %2d: pulse = %3d, pause = %3d] ", time_counter, irmp_bit, irmp_pulse_time, irmp_pause_time); |
|
if (irmp_pause_time >= DENON_1_PAUSE_LEN_MIN && irmp_pause_time <= DENON_1_PAUSE_LEN_MAX) |
{ // pause timings correct for "1"? |
ANALYZE_PUTCHAR ('1'); // yes, store 1 |
ANALYZE_NEWLINE (); |
irmp_store_bit (1); |
} |
else // if (irmp_pause_time >= DENON_0_PAUSE_LEN_MIN && irmp_pause_time <= DENON_0_PAUSE_LEN_MAX) |
{ // pause timings correct for "0"? |
ANALYZE_PUTCHAR ('0'); // yes, store 0 |
ANALYZE_NEWLINE (); |
irmp_store_bit (0); |
} |
} |
else |
#endif // IRMP_SUPPORT_DENON_PROTOCOL == 1 |
{ |
; // else do nothing |
} |
|
irmp_pulse_time = 1; // set counter to 1, not 0 |
irmp_pause_time = 0; |
wait_for_start_space = 0; |
} |
} |
else if (wait_for_space) // the data section.... |
{ // counting the time of darkness.... |
uint8_t got_light = FALSE; |
|
if (irmp_input) // still dark? |
{ // yes... |
if (irmp_bit == irmp_param.complete_len && irmp_param.stop_bit == 1) |
{ |
if (irmp_pulse_time >= irmp_param.pulse_0_len_min && irmp_pulse_time <= irmp_param.pulse_0_len_max) |
{ |
#ifdef ANALYZE |
if (! (irmp_param.flags & IRMP_PARAM_FLAG_IS_MANCHESTER)) |
{ |
ANALYZE_PRINTF ("stop bit detected\n"); |
} |
#endif |
irmp_param.stop_bit = 0; |
} |
else |
{ |
ANALYZE_PRINTF ("stop bit timing wrong\n"); |
|
irmp_start_bit_detected = 0; // wait for another start bit... |
irmp_pulse_time = 0; |
irmp_pause_time = 0; |
} |
} |
else |
{ |
irmp_pause_time++; // increment counter |
|
#if IRMP_SUPPORT_SIRCS_PROTOCOL == 1 |
if (irmp_param.protocol == IRMP_SIRCS_PROTOCOL && // Sony has a variable number of bits: |
irmp_pause_time > SIRCS_PAUSE_LEN_MAX && // minimum is 12 |
irmp_bit >= 12 - 1) // pause too long? |
{ // yes, break and close this frame |
irmp_param.complete_len = irmp_bit + 1; // set new complete length |
got_light = TRUE; // this is a lie, but helps (generates stop bit) |
irmp_param.command_end = irmp_param.command_offset + irmp_bit + 1; // correct command length |
irmp_pause_time = SIRCS_PAUSE_LEN_MAX - 1; // correct pause length |
} |
else |
#endif |
#if IRMP_SUPPORT_GRUNDIG_OR_NOKIA_PROTOCOL == 1 |
if (irmp_param.protocol == IRMP_GRUNDIG_PROTOCOL && !irmp_param.stop_bit) |
{ |
if (irmp_pause_time > 2 * irmp_param.pause_1_len_max && irmp_bit >= GRUNDIG_COMPLETE_DATA_LEN - 2) |
{ // special manchester decoder |
irmp_param.complete_len = GRUNDIG_COMPLETE_DATA_LEN; // correct complete len |
got_light = TRUE; // this is a lie, but generates a stop bit ;-) |
irmp_param.stop_bit = TRUE; // set flag |
} |
else if (irmp_bit >= GRUNDIG_COMPLETE_DATA_LEN) |
{ |
ANALYZE_PRINTF ("Switching to NOKIA protocol\n"); |
irmp_param.protocol = IRMP_NOKIA_PROTOCOL; // change protocol |
irmp_param.address_offset = NOKIA_ADDRESS_OFFSET; |
irmp_param.address_end = NOKIA_ADDRESS_OFFSET + NOKIA_ADDRESS_LEN; |
irmp_param.command_offset = NOKIA_COMMAND_OFFSET; |
irmp_param.command_end = NOKIA_COMMAND_OFFSET + NOKIA_COMMAND_LEN; |
|
if (irmp_tmp_command & 0x300) |
{ |
irmp_tmp_address = (irmp_tmp_command >> 8); |
irmp_tmp_command &= 0xFF; |
} |
} |
} |
else |
#endif |
#if IRMP_SUPPORT_MANCHESTER == 1 |
if ((irmp_param.flags & IRMP_PARAM_FLAG_IS_MANCHESTER) && |
irmp_pause_time > 2 * irmp_param.pause_1_len_max && irmp_bit >= irmp_param.complete_len - 2 && !irmp_param.stop_bit) |
{ // special manchester decoder |
got_light = TRUE; // this is a lie, but generates a stop bit ;-) |
irmp_param.stop_bit = TRUE; // set flag |
} |
else |
#endif // IRMP_SUPPORT_MANCHESTER == 1 |
if (irmp_pause_time > IRMP_TIMEOUT_LEN) // timeout? |
{ // yes... |
if (irmp_bit == irmp_param.complete_len - 1 && irmp_param.stop_bit == 0) |
{ |
irmp_bit++; |
} |
#if IRMP_SUPPORT_JVC_PROTOCOL == 1 |
else if (irmp_param.protocol == IRMP_NEC_PROTOCOL && (irmp_bit == 16 || irmp_bit == 17)) // it was a JVC stop bit |
{ |
ANALYZE_PRINTF ("Switching to JVC protocol\n"); |
irmp_param.stop_bit = TRUE; // set flag |
irmp_param.protocol = IRMP_JVC_PROTOCOL; // switch protocol |
irmp_param.complete_len = irmp_bit; // patch length: 16 or 17 |
irmp_tmp_command = (irmp_tmp_address >> 4); // set command: upper 12 bits are command bits |
irmp_tmp_address = irmp_tmp_address & 0x000F; // lower 4 bits are address bits |
irmp_start_bit_detected = 1; // tricky: don't wait for another start bit... |
} |
#endif // IRMP_SUPPORT_JVC_PROTOCOL == 1 |
else |
{ |
ANALYZE_PRINTF ("error 2: pause %d after data bit %d too long\n", irmp_pause_time, irmp_bit); |
ANALYZE_ONLY_NORMAL_PUTCHAR ('\n'); |
|
irmp_start_bit_detected = 0; // wait for another start bit... |
irmp_pulse_time = 0; |
irmp_pause_time = 0; |
} |
} |
} |
} |
else |
{ // got light now! |
got_light = TRUE; |
} |
|
if (got_light) |
{ |
ANALYZE_PRINTF ("%8d [bit %2d: pulse = %3d, pause = %3d] ", time_counter, irmp_bit, irmp_pulse_time, irmp_pause_time); |
|
#if IRMP_SUPPORT_MANCHESTER == 1 |
if ((irmp_param.flags & IRMP_PARAM_FLAG_IS_MANCHESTER)) // Manchester |
{ |
if (irmp_pulse_time > irmp_param.pulse_1_len_max /* && irmp_pulse_time <= 2 * irmp_param.pulse_1_len_max */) |
{ |
#if IRMP_SUPPORT_RC6_PROTOCOL == 1 |
if (irmp_param.protocol == IRMP_RC6_PROTOCOL && irmp_bit == 4 && irmp_pulse_time > RC6_TOGGLE_BIT_LEN_MIN) // RC6 toggle bit |
{ |
ANALYZE_PUTCHAR ('T'); |
if (irmp_param.complete_len == RC6_COMPLETE_DATA_LEN_LONG) // RC6 mode 6A |
{ |
irmp_store_bit (1); |
last_value = 1; |
} |
else // RC6 mode 0 |
{ |
irmp_store_bit (0); |
last_value = 0; |
} |
ANALYZE_NEWLINE (); |
} |
else |
#endif // IRMP_SUPPORT_RC6_PROTOCOL == 1 |
{ |
ANALYZE_PUTCHAR ((irmp_param.flags & IRMP_PARAM_FLAG_1ST_PULSE_IS_1) ? '0' : '1'); |
irmp_store_bit ((irmp_param.flags & IRMP_PARAM_FLAG_1ST_PULSE_IS_1) ? 0 : 1 ); |
|
#if IRMP_SUPPORT_RC6_PROTOCOL == 1 |
if (irmp_param.protocol == IRMP_RC6_PROTOCOL && irmp_bit == 4 && irmp_pulse_time > RC6_TOGGLE_BIT_LEN_MIN) // RC6 toggle bit |
{ |
ANALYZE_PUTCHAR ('T'); |
irmp_store_bit (1); |
|
if (irmp_pause_time > 2 * irmp_param.pause_1_len_max) |
{ |
last_value = 0; |
} |
else |
{ |
last_value = 1; |
} |
ANALYZE_NEWLINE (); |
} |
else |
#endif // IRMP_SUPPORT_RC6_PROTOCOL == 1 |
{ |
ANALYZE_PUTCHAR ((irmp_param.flags & IRMP_PARAM_FLAG_1ST_PULSE_IS_1) ? '1' : '0'); |
irmp_store_bit ((irmp_param.flags & IRMP_PARAM_FLAG_1ST_PULSE_IS_1) ? 1 : 0 ); |
#if IRMP_SUPPORT_RC5_PROTOCOL == 1 && (IRMP_SUPPORT_FDC_PROTOCOL == 1 || IRMP_SUPPORT_RCCAR_PROTOCOL == 1) |
if (! irmp_param2.protocol) |
#endif |
{ |
ANALYZE_NEWLINE (); |
} |
last_value = (irmp_param.flags & IRMP_PARAM_FLAG_1ST_PULSE_IS_1) ? 1 : 0; |
} |
} |
} |
else if (irmp_pulse_time >= irmp_param.pulse_1_len_min && irmp_pulse_time <= irmp_param.pulse_1_len_max) |
{ |
uint8_t manchester_value; |
|
if (last_pause > irmp_param.pause_1_len_max && last_pause <= 2 * irmp_param.pause_1_len_max) |
{ |
manchester_value = last_value ? 0 : 1; |
last_value = manchester_value; |
} |
else |
{ |
manchester_value = last_value; |
} |
|
ANALYZE_PUTCHAR (manchester_value + '0'); |
|
#if IRMP_SUPPORT_RC5_PROTOCOL == 1 && (IRMP_SUPPORT_FDC_PROTOCOL == 1 || IRMP_SUPPORT_RCCAR_PROTOCOL == 1) |
if (! irmp_param2.protocol) |
#endif |
{ |
ANALYZE_NEWLINE (); |
} |
|
#if IRMP_SUPPORT_RC6_PROTOCOL == 1 |
if (irmp_param.protocol == IRMP_RC6_PROTOCOL && irmp_bit == 1 && manchester_value == 1) // RC6 mode != 0 ??? |
{ |
ANALYZE_PRINTF ("Switching to RC6A protocol\n"); |
irmp_param.complete_len = RC6_COMPLETE_DATA_LEN_LONG; |
irmp_param.address_offset = 5; |
irmp_param.address_end = irmp_param.address_offset + 15; |
irmp_param.command_offset = irmp_param.address_end + 1; // skip 1 system bit, changes like a toggle bit |
irmp_param.command_end = irmp_param.command_offset + 16 - 1; |
irmp_tmp_address = 1; // addr 0 - 32767 --> 32768 - 65535 |
} |
#endif // IRMP_SUPPORT_RC6_PROTOCOL == 1 |
|
irmp_store_bit (manchester_value); |
} |
else |
{ |
#if IRMP_SUPPORT_RC5_PROTOCOL == 1 && IRMP_SUPPORT_FDC_PROTOCOL == 1 |
if (irmp_param2.protocol == IRMP_FDC_PROTOCOL && |
irmp_pulse_time >= FDC_PULSE_LEN_MIN && irmp_pulse_time <= FDC_PULSE_LEN_MAX && |
((irmp_pause_time >= FDC_1_PAUSE_LEN_MIN && irmp_pause_time <= FDC_1_PAUSE_LEN_MAX) || |
(irmp_pause_time >= FDC_0_PAUSE_LEN_MIN && irmp_pause_time <= FDC_0_PAUSE_LEN_MAX))) |
{ |
ANALYZE_PUTCHAR ('?'); |
irmp_param.protocol = 0; // switch to FDC, see below |
} |
else |
#endif // IRMP_SUPPORT_FDC_PROTOCOL == 1 |
#if IRMP_SUPPORT_RC5_PROTOCOL == 1 && IRMP_SUPPORT_RCCAR_PROTOCOL == 1 |
if (irmp_param2.protocol == IRMP_RCCAR_PROTOCOL && |
irmp_pulse_time >= RCCAR_PULSE_LEN_MIN && irmp_pulse_time <= RCCAR_PULSE_LEN_MAX && |
((irmp_pause_time >= RCCAR_1_PAUSE_LEN_MIN && irmp_pause_time <= RCCAR_1_PAUSE_LEN_MAX) || |
(irmp_pause_time >= RCCAR_0_PAUSE_LEN_MIN && irmp_pause_time <= RCCAR_0_PAUSE_LEN_MAX))) |
{ |
ANALYZE_PUTCHAR ('?'); |
irmp_param.protocol = 0; // switch to RCCAR, see below |
} |
else |
#endif // IRMP_SUPPORT_RCCAR_PROTOCOL == 1 |
{ |
ANALYZE_PUTCHAR ('?'); |
ANALYZE_NEWLINE (); |
ANALYZE_PRINTF ("error 3 manchester: timing not correct: data bit %d, pulse: %d, pause: %d\n", irmp_bit, irmp_pulse_time, irmp_pause_time); |
ANALYZE_ONLY_NORMAL_PUTCHAR ('\n'); |
irmp_start_bit_detected = 0; // reset flags and wait for next start bit |
irmp_pause_time = 0; |
} |
} |
|
#if IRMP_SUPPORT_RC5_PROTOCOL == 1 && IRMP_SUPPORT_FDC_PROTOCOL == 1 |
if (irmp_param2.protocol == IRMP_FDC_PROTOCOL && irmp_pulse_time >= FDC_PULSE_LEN_MIN && irmp_pulse_time <= FDC_PULSE_LEN_MAX) |
{ |
if (irmp_pause_time >= FDC_1_PAUSE_LEN_MIN && irmp_pause_time <= FDC_1_PAUSE_LEN_MAX) |
{ |
ANALYZE_PRINTF (" 1 (FDC)\n"); |
irmp_store_bit2 (1); |
} |
else if (irmp_pause_time >= FDC_0_PAUSE_LEN_MIN && irmp_pause_time <= FDC_0_PAUSE_LEN_MAX) |
{ |
ANALYZE_PRINTF (" 0 (FDC)\n"); |
irmp_store_bit2 (0); |
} |
|
if (! irmp_param.protocol) |
{ |
ANALYZE_PRINTF ("Switching to FDC protocol\n"); |
memcpy (&irmp_param, &irmp_param2, sizeof (IRMP_PARAMETER)); |
irmp_param2.protocol = 0; |
irmp_tmp_address = irmp_tmp_address2; |
irmp_tmp_command = irmp_tmp_command2; |
} |
} |
#endif // IRMP_SUPPORT_FDC_PROTOCOL == 1 |
#if IRMP_SUPPORT_RC5_PROTOCOL == 1 && IRMP_SUPPORT_RCCAR_PROTOCOL == 1 |
if (irmp_param2.protocol == IRMP_RCCAR_PROTOCOL && irmp_pulse_time >= RCCAR_PULSE_LEN_MIN && irmp_pulse_time <= RCCAR_PULSE_LEN_MAX) |
{ |
if (irmp_pause_time >= RCCAR_1_PAUSE_LEN_MIN && irmp_pause_time <= RCCAR_1_PAUSE_LEN_MAX) |
{ |
ANALYZE_PRINTF (" 1 (RCCAR)\n"); |
irmp_store_bit2 (1); |
} |
else if (irmp_pause_time >= RCCAR_0_PAUSE_LEN_MIN && irmp_pause_time <= RCCAR_0_PAUSE_LEN_MAX) |
{ |
ANALYZE_PRINTF (" 0 (RCCAR)\n"); |
irmp_store_bit2 (0); |
} |
|
if (! irmp_param.protocol) |
{ |
ANALYZE_PRINTF ("Switching to RCCAR protocol\n"); |
memcpy (&irmp_param, &irmp_param2, sizeof (IRMP_PARAMETER)); |
irmp_param2.protocol = 0; |
irmp_tmp_address = irmp_tmp_address2; |
irmp_tmp_command = irmp_tmp_command2; |
} |
} |
#endif // IRMP_SUPPORT_RCCAR_PROTOCOL == 1 |
|
last_pause = irmp_pause_time; |
wait_for_space = 0; |
} |
else |
#endif // IRMP_SUPPORT_MANCHESTER == 1 |
|
|
#if IRMP_SUPPORT_SAMSUNG_PROTOCOL == 1 |
if (irmp_param.protocol == IRMP_SAMSUNG_PROTOCOL && irmp_bit == 16) // Samsung: 16th bit |
{ |
if (irmp_pulse_time >= SAMSUNG_PULSE_LEN_MIN && irmp_pulse_time <= SAMSUNG_PULSE_LEN_MAX && |
irmp_pause_time >= SAMSUNG_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= SAMSUNG_START_BIT_PAUSE_LEN_MAX) |
{ |
ANALYZE_PRINTF ("SYNC\n"); |
wait_for_space = 0; |
irmp_tmp_id = 0; |
irmp_bit++; |
} |
else if (irmp_pulse_time >= SAMSUNG_PULSE_LEN_MIN && irmp_pulse_time <= SAMSUNG_PULSE_LEN_MAX) |
{ |
irmp_param.protocol = IRMP_SAMSUNG32_PROTOCOL; |
irmp_param.command_offset = SAMSUNG32_COMMAND_OFFSET; |
irmp_param.command_end = SAMSUNG32_COMMAND_OFFSET + SAMSUNG32_COMMAND_LEN; |
irmp_param.complete_len = SAMSUNG32_COMPLETE_DATA_LEN; |
|
if (irmp_pause_time >= SAMSUNG_1_PAUSE_LEN_MIN && irmp_pause_time <= SAMSUNG_1_PAUSE_LEN_MAX) |
{ |
ANALYZE_PUTCHAR ('1'); |
ANALYZE_NEWLINE (); |
irmp_store_bit (1); |
wait_for_space = 0; |
} |
else |
{ |
ANALYZE_PUTCHAR ('0'); |
ANALYZE_NEWLINE (); |
irmp_store_bit (0); |
wait_for_space = 0; |
} |
|
ANALYZE_PRINTF ("Switching to SAMSUNG32 protocol\n"); |
} |
else |
{ // timing incorrect! |
ANALYZE_PRINTF ("error 3 Samsung: timing not correct: data bit %d, pulse: %d, pause: %d\n", irmp_bit, irmp_pulse_time, irmp_pause_time); |
ANALYZE_ONLY_NORMAL_PUTCHAR ('\n'); |
irmp_start_bit_detected = 0; // reset flags and wait for next start bit |
irmp_pause_time = 0; |
} |
} |
else |
#endif // IRMP_SUPPORT_SAMSUNG_PROTOCOL |
|
#if IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL == 1 |
if (irmp_param.protocol == IRMP_BANG_OLUFSEN_PROTOCOL) |
{ |
if (irmp_pulse_time >= BANG_OLUFSEN_PULSE_LEN_MIN && irmp_pulse_time <= BANG_OLUFSEN_PULSE_LEN_MAX) |
{ |
if (irmp_bit == 1) // Bang & Olufsen: 3rd bit |
{ |
if (irmp_pause_time >= BANG_OLUFSEN_START_BIT3_PAUSE_LEN_MIN && irmp_pause_time <= BANG_OLUFSEN_START_BIT3_PAUSE_LEN_MAX) |
{ |
ANALYZE_PRINTF ("3rd start bit\n"); |
wait_for_space = 0; |
irmp_bit++; |
} |
else |
{ // timing incorrect! |
ANALYZE_PRINTF ("error 3a B&O: timing not correct: data bit %d, pulse: %d, pause: %d\n", irmp_bit, irmp_pulse_time, irmp_pause_time); |
ANALYZE_ONLY_NORMAL_PUTCHAR ('\n'); |
irmp_start_bit_detected = 0; // reset flags and wait for next start bit |
irmp_pause_time = 0; |
} |
} |
else if (irmp_bit == 19) // Bang & Olufsen: trailer bit |
{ |
if (irmp_pause_time >= BANG_OLUFSEN_TRAILER_BIT_PAUSE_LEN_MIN && irmp_pause_time <= BANG_OLUFSEN_TRAILER_BIT_PAUSE_LEN_MAX) |
{ |
ANALYZE_PRINTF ("trailer bit\n"); |
wait_for_space = 0; |
irmp_bit++; |
} |
else |
{ // timing incorrect! |
ANALYZE_PRINTF ("error 3b B&O: timing not correct: data bit %d, pulse: %d, pause: %d\n", irmp_bit, irmp_pulse_time, irmp_pause_time); |
ANALYZE_ONLY_NORMAL_PUTCHAR ('\n'); |
irmp_start_bit_detected = 0; // reset flags and wait for next start bit |
irmp_pause_time = 0; |
} |
} |
else |
{ |
if (irmp_pause_time >= BANG_OLUFSEN_1_PAUSE_LEN_MIN && irmp_pause_time <= BANG_OLUFSEN_1_PAUSE_LEN_MAX) |
{ // pulse & pause timings correct for "1"? |
ANALYZE_PUTCHAR ('1'); |
ANALYZE_NEWLINE (); |
irmp_store_bit (1); |
last_value = 1; |
wait_for_space = 0; |
} |
else if (irmp_pause_time >= BANG_OLUFSEN_0_PAUSE_LEN_MIN && irmp_pause_time <= BANG_OLUFSEN_0_PAUSE_LEN_MAX) |
{ // pulse & pause timings correct for "0"? |
ANALYZE_PUTCHAR ('0'); |
ANALYZE_NEWLINE (); |
irmp_store_bit (0); |
last_value = 0; |
wait_for_space = 0; |
} |
else if (irmp_pause_time >= BANG_OLUFSEN_R_PAUSE_LEN_MIN && irmp_pause_time <= BANG_OLUFSEN_R_PAUSE_LEN_MAX) |
{ |
ANALYZE_PUTCHAR (last_value + '0'); |
ANALYZE_NEWLINE (); |
irmp_store_bit (last_value); |
wait_for_space = 0; |
} |
else |
{ // timing incorrect! |
ANALYZE_PRINTF ("error 3c B&O: timing not correct: data bit %d, pulse: %d, pause: %d\n", irmp_bit, irmp_pulse_time, irmp_pause_time); |
ANALYZE_ONLY_NORMAL_PUTCHAR ('\n'); |
irmp_start_bit_detected = 0; // reset flags and wait for next start bit |
irmp_pause_time = 0; |
} |
} |
} |
else |
{ // timing incorrect! |
ANALYZE_PRINTF ("error 3d B&O: timing not correct: data bit %d, pulse: %d, pause: %d\n", irmp_bit, irmp_pulse_time, irmp_pause_time); |
ANALYZE_ONLY_NORMAL_PUTCHAR ('\n'); |
irmp_start_bit_detected = 0; // reset flags and wait for next start bit |
irmp_pause_time = 0; |
} |
} |
else |
#endif // IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL |
|
if (irmp_pulse_time >= irmp_param.pulse_1_len_min && irmp_pulse_time <= irmp_param.pulse_1_len_max && |
irmp_pause_time >= irmp_param.pause_1_len_min && irmp_pause_time <= irmp_param.pause_1_len_max) |
{ // pulse & pause timings correct for "1"? |
ANALYZE_PUTCHAR ('1'); |
ANALYZE_NEWLINE (); |
irmp_store_bit (1); |
wait_for_space = 0; |
} |
else if (irmp_pulse_time >= irmp_param.pulse_0_len_min && irmp_pulse_time <= irmp_param.pulse_0_len_max && |
irmp_pause_time >= irmp_param.pause_0_len_min && irmp_pause_time <= irmp_param.pause_0_len_max) |
{ // pulse & pause timings correct for "0"? |
ANALYZE_PUTCHAR ('0'); |
ANALYZE_NEWLINE (); |
irmp_store_bit (0); |
wait_for_space = 0; |
} |
else |
{ // timing incorrect! |
ANALYZE_PRINTF ("error 3: timing not correct: data bit %d, pulse: %d, pause: %d\n", irmp_bit, irmp_pulse_time, irmp_pause_time); |
ANALYZE_ONLY_NORMAL_PUTCHAR ('\n'); |
irmp_start_bit_detected = 0; // reset flags and wait for next start bit |
irmp_pause_time = 0; |
} |
|
irmp_pulse_time = 1; // set counter to 1, not 0 |
} |
} |
else |
{ // counting the pulse length ... |
if (! irmp_input) // still light? |
{ // yes... |
irmp_pulse_time++; // increment counter |
} |
else |
{ // now it's dark! |
wait_for_space = 1; // let's count the time (see above) |
irmp_pause_time = 1; // set pause counter to 1, not 0 |
} |
} |
|
if (irmp_start_bit_detected && irmp_bit == irmp_param.complete_len && irmp_param.stop_bit == 0) // enough bits received? |
{ |
if (last_irmp_command == irmp_tmp_command && repetition_len < AUTO_FRAME_REPETITION_LEN) |
{ |
repetition_frame_number++; |
} |
else |
{ |
repetition_frame_number = 0; |
} |
|
#if IRMP_SUPPORT_SIRCS_PROTOCOL == 1 |
// if SIRCS protocol and the code will be repeated within 50 ms, we will ignore 2nd and 3rd repetition frame |
if (irmp_param.protocol == IRMP_SIRCS_PROTOCOL && (repetition_frame_number == 1 || repetition_frame_number == 2)) |
{ |
ANALYZE_PRINTF ("code skipped: SIRCS auto repetition frame #%d, counter = %d, auto repetition len = %d\n", |
repetition_frame_number + 1, repetition_len, AUTO_FRAME_REPETITION_LEN); |
repetition_len = 0; |
} |
else |
#endif |
|
#if IRMP_SUPPORT_KASEIKYO_PROTOCOL == 1 |
// if KASEIKYO protocol and the code will be repeated within 50 ms, we will ignore 2nd repetition frame |
if (irmp_param.protocol == IRMP_KASEIKYO_PROTOCOL && repetition_frame_number == 1) |
{ |
ANALYZE_PRINTF ("code skipped: KASEIKYO auto repetition frame #%d, counter = %d, auto repetition len = %d\n", |
repetition_frame_number + 1, repetition_len, AUTO_FRAME_REPETITION_LEN); |
repetition_len = 0; |
} |
else |
#endif |
|
#if IRMP_SUPPORT_SAMSUNG_PROTOCOL == 1 |
// if SAMSUNG32 protocol and the code will be repeated within 50 ms, we will ignore every 2nd frame |
if (irmp_param.protocol == IRMP_SAMSUNG32_PROTOCOL && (repetition_frame_number & 0x01)) |
{ |
ANALYZE_PRINTF ("code skipped: SAMSUNG32 auto repetition frame #%d, counter = %d, auto repetition len = %d\n", |
repetition_frame_number + 1, repetition_len, AUTO_FRAME_REPETITION_LEN); |
repetition_len = 0; |
} |
else |
#endif |
|
#if IRMP_SUPPORT_NUBERT_PROTOCOL == 1 |
// if NUBERT protocol and the code will be repeated within 50 ms, we will ignore every 2nd frame |
if (irmp_param.protocol == IRMP_NUBERT_PROTOCOL && (repetition_frame_number & 0x01)) |
{ |
ANALYZE_PRINTF ("code skipped: NUBERT auto repetition frame #%d, counter = %d, auto repetition len = %d\n", |
repetition_frame_number + 1, repetition_len, AUTO_FRAME_REPETITION_LEN); |
repetition_len = 0; |
} |
else |
#endif |
|
{ |
ANALYZE_PRINTF ("%8d code detected, length = %d\n", time_counter, irmp_bit); |
irmp_ir_detected = TRUE; |
|
#if IRMP_SUPPORT_DENON_PROTOCOL == 1 |
if (irmp_param.protocol == IRMP_DENON_PROTOCOL) |
{ // check for repetition frame |
if ((~irmp_tmp_command & 0x3FF) == last_irmp_denon_command) // command bits must be inverted |
{ |
irmp_tmp_command = last_irmp_denon_command; // use command received before! |
|
irmp_protocol = irmp_param.protocol; // store protocol |
irmp_address = irmp_tmp_address; // store address |
irmp_command = irmp_tmp_command ; // store command |
} |
else |
{ |
ANALYZE_PRINTF ("waiting for inverted command repetition\n"); |
irmp_ir_detected = FALSE; |
last_irmp_denon_command = irmp_tmp_command; |
} |
} |
else |
#endif // IRMP_SUPPORT_DENON_PROTOCOL |
|
#if IRMP_SUPPORT_GRUNDIG_PROTOCOL == 1 |
if (irmp_param.protocol == IRMP_GRUNDIG_PROTOCOL && irmp_tmp_command == 0x01ff) |
{ // Grundig start frame? |
ANALYZE_PRINTF ("Detected GRUNDIG start frame, ignoring it\n"); |
irmp_ir_detected = FALSE; |
} |
else |
#endif // IRMP_SUPPORT_GRUNDIG_PROTOCOL |
|
#if IRMP_SUPPORT_NOKIA_PROTOCOL == 1 |
if (irmp_param.protocol == IRMP_NOKIA_PROTOCOL && irmp_tmp_address == 0x00ff && irmp_tmp_command == 0x00fe) |
{ // Nokia start frame? |
ANALYZE_PRINTF ("Detected NOKIA start frame, ignoring it\n"); |
irmp_ir_detected = FALSE; |
} |
else |
#endif // IRMP_SUPPORT_NOKIA_PROTOCOL |
{ |
#if IRMP_SUPPORT_NEC_PROTOCOL == 1 |
if (irmp_param.protocol == IRMP_NEC_PROTOCOL && irmp_bit == 0) // repetition frame |
{ |
if (repetition_len < NEC_FRAME_REPEAT_PAUSE_LEN_MAX) |
{ |
ANALYZE_PRINTF ("Detected NEC repetition frame, repetition_len = %d\n", repetition_len); |
irmp_tmp_address = last_irmp_address; // address is last address |
irmp_tmp_command = last_irmp_command; // command is last command |
irmp_flags |= IRMP_FLAG_REPETITION; |
repetition_len = 0; |
} |
else |
{ |
ANALYZE_PRINTF ("Detected NEC repetition frame, ignoring it: timeout occured, repetition_len = %d > %d\n", |
repetition_len, NEC_FRAME_REPEAT_PAUSE_LEN_MAX); |
irmp_ir_detected = FALSE; |
} |
} |
#endif // IRMP_SUPPORT_NEC_PROTOCOL |
|
#if IRMP_SUPPORT_KASEIKYO_PROTOCOL == 1 |
if (irmp_param.protocol == IRMP_KASEIKYO_PROTOCOL) |
{ |
uint8_t xor; |
// ANALYZE_PRINTF ("0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x\n", |
// xor_check[0], xor_check[1], xor_check[2], xor_check[3], xor_check[4], xor_check[5]); |
|
xor = (xor_check[0] & 0x0F) ^ ((xor_check[0] & 0xF0) >> 4) ^ (xor_check[1] & 0x0F) ^ ((xor_check[1] & 0xF0) >> 4); |
|
if (xor != (xor_check[2] & 0x0F)) |
{ |
ANALYZE_PRINTF ("error 4: wrong XOR check for customer id: 0x%1x 0x%1x\n", xor, xor_check[2] & 0x0F); |
irmp_ir_detected = FALSE; |
} |
|
xor = xor_check[2] ^ xor_check[3] ^ xor_check[4]; |
|
if (xor != xor_check[5]) |
{ |
ANALYZE_PRINTF ("error 4: wrong XOR check for data bits: 0x%02x 0x%02x\n", xor, xor_check[5]); |
irmp_ir_detected = FALSE; |
} |
} |
#endif // IRMP_SUPPORT_KASEIKYO_PROTOCOL == 1 |
|
#if IRMP_SUPPORT_RC6_PROTOCOL == 1 |
if (irmp_param.protocol == IRMP_RC6_PROTOCOL && irmp_param.complete_len == RC6_COMPLETE_DATA_LEN_LONG) // RC6 mode = 6? |
{ |
irmp_protocol = IRMP_RC6A_PROTOCOL; |
} |
else |
#endif // IRMP_SUPPORT_RC6_PROTOCOL == 1 |
|
irmp_protocol = irmp_param.protocol; |
|
#if IRMP_SUPPORT_FDC_PROTOCOL == 1 |
if (irmp_param.protocol == IRMP_FDC_PROTOCOL) |
{ |
if (irmp_tmp_command & 0x000F) // released key? |
{ |
irmp_tmp_command = (irmp_tmp_command >> 4) | 0x80; // yes, set bit 7 |
} |
else |
{ |
irmp_tmp_command >>= 4; // no, it's a pressed key |
} |
irmp_tmp_command |= (irmp_tmp_address << 2) & 0x0F00; // 000000CCCCAAAAAA -> 0000CCCC00000000 |
irmp_tmp_address &= 0x003F; |
} |
#endif |
|
irmp_address = irmp_tmp_address; // store address |
#if IRMP_SUPPORT_NEC_PROTOCOL == 1 |
last_irmp_address = irmp_tmp_address; // store as last address, too |
#endif |
|
#if IRMP_SUPPORT_RC5_PROTOCOL == 1 |
if (irmp_param.protocol == IRMP_RC5_PROTOCOL) |
{ |
irmp_tmp_command |= rc5_cmd_bit6; // store bit 6 |
} |
#endif |
irmp_command = irmp_tmp_command; // store command |
|
#if IRMP_SUPPORT_SAMSUNG_PROTOCOL == 1 |
irmp_id = irmp_tmp_id; |
#endif |
} |
} |
|
if (irmp_ir_detected) |
{ |
if (last_irmp_command == irmp_command && |
last_irmp_address == irmp_address && |
repetition_len < IRMP_KEY_REPETITION_LEN) |
{ |
irmp_flags |= IRMP_FLAG_REPETITION; |
} |
|
last_irmp_address = irmp_tmp_address; // store as last address, too |
last_irmp_command = irmp_tmp_command; // store as last command, too |
|
repetition_len = 0; |
} |
else |
{ |
ANALYZE_ONLY_NORMAL_PUTCHAR ('\n'); |
} |
|
irmp_start_bit_detected = 0; // and wait for next start bit |
irmp_tmp_command = 0; |
irmp_pulse_time = 0; |
irmp_pause_time = 0; |
|
#if IRMP_SUPPORT_JVC_PROTOCOL == 1 |
if (irmp_protocol == IRMP_JVC_PROTOCOL) // the stop bit of JVC frame is also start bit of next frame |
{ // set pulse time here! |
irmp_pulse_time = ((uint8_t)(F_INTERRUPTS * JVC_START_BIT_PULSE_TIME)); |
} |
#endif // IRMP_SUPPORT_JVC_PROTOCOL == 1 |
} |
} |
} |
return (irmp_ir_detected); |
} |
|
#ifdef ANALYZE |
|
/*--------------------------------------------------------------------------------------------------------------------------------------------------- |
* main functions - for Unix/Linux + Windows only! |
* |
* AVR: see main.c! |
* |
* Compile it under linux with: |
* cc irmp.c -o irmp |
* |
* usage: ./irmp [-v|-s|-a|-l|-p] < file |
* |
* options: |
* -v verbose |
* -s silent |
* -a analyze |
* -l list pulse/pauses |
* -p print timings |
*--------------------------------------------------------------------------------------------------------------------------------------------------- |
*/ |
|
static void |
print_timings (void) |
{ |
printf ("IRMP_TIMEOUT_LEN: %d [%d byte(s)]\n", IRMP_TIMEOUT_LEN, sizeof (PAUSE_LEN)); |
printf ("IRMP_KEY_REPETITION_LEN %d\n", IRMP_KEY_REPETITION_LEN); |
puts (""); |
printf ("PROTOCOL S S-PULSE S-PAUSE PULSE-0 PAUSE-0 PULSE-1 PAUSE-1\n"); |
printf ("====================================================================================\n"); |
printf ("SIRCS 1 %3d - %3d %3d - %3d %3d - %3d %3d - %3d %3d - %3d %3d - %3d\n", |
SIRCS_START_BIT_PULSE_LEN_MIN, SIRCS_START_BIT_PULSE_LEN_MAX, SIRCS_START_BIT_PAUSE_LEN_MIN, SIRCS_START_BIT_PAUSE_LEN_MAX, |
SIRCS_0_PULSE_LEN_MIN, SIRCS_0_PULSE_LEN_MAX, SIRCS_PAUSE_LEN_MIN, SIRCS_PAUSE_LEN_MAX, |
SIRCS_1_PULSE_LEN_MIN, SIRCS_1_PULSE_LEN_MAX, SIRCS_PAUSE_LEN_MIN, SIRCS_PAUSE_LEN_MAX); |
|
printf ("NEC 1 %3d - %3d %3d - %3d %3d - %3d %3d - %3d %3d - %3d %3d - %3d\n", |
NEC_START_BIT_PULSE_LEN_MIN, NEC_START_BIT_PULSE_LEN_MAX, NEC_START_BIT_PAUSE_LEN_MIN, NEC_START_BIT_PAUSE_LEN_MAX, |
NEC_PULSE_LEN_MIN, NEC_PULSE_LEN_MAX, NEC_0_PAUSE_LEN_MIN, NEC_0_PAUSE_LEN_MAX, |
NEC_PULSE_LEN_MIN, NEC_PULSE_LEN_MAX, NEC_1_PAUSE_LEN_MIN, NEC_1_PAUSE_LEN_MAX); |
|
printf ("NEC (rep) 1 %3d - %3d %3d - %3d %3d - %3d %3d - %3d %3d - %3d %3d - %3d\n", |
NEC_START_BIT_PULSE_LEN_MIN, NEC_START_BIT_PULSE_LEN_MAX, NEC_REPEAT_START_BIT_PAUSE_LEN_MIN, NEC_REPEAT_START_BIT_PAUSE_LEN_MAX, |
NEC_PULSE_LEN_MIN, NEC_PULSE_LEN_MAX, NEC_0_PAUSE_LEN_MIN, NEC_0_PAUSE_LEN_MAX, |
NEC_PULSE_LEN_MIN, NEC_PULSE_LEN_MAX, NEC_1_PAUSE_LEN_MIN, NEC_1_PAUSE_LEN_MAX); |
|
printf ("SAMSUNG 1 %3d - %3d %3d - %3d %3d - %3d %3d - %3d %3d - %3d %3d - %3d\n", |
SAMSUNG_START_BIT_PULSE_LEN_MIN, SAMSUNG_START_BIT_PULSE_LEN_MAX, SAMSUNG_START_BIT_PAUSE_LEN_MIN, SAMSUNG_START_BIT_PAUSE_LEN_MAX, |
SAMSUNG_PULSE_LEN_MIN, SAMSUNG_PULSE_LEN_MAX, SAMSUNG_0_PAUSE_LEN_MIN, SAMSUNG_0_PAUSE_LEN_MAX, |
SAMSUNG_PULSE_LEN_MIN, SAMSUNG_PULSE_LEN_MAX, SAMSUNG_1_PAUSE_LEN_MIN, SAMSUNG_1_PAUSE_LEN_MAX); |
|
printf ("MATSUSHITA 1 %3d - %3d %3d - %3d %3d - %3d %3d - %3d %3d - %3d %3d - %3d\n", |
MATSUSHITA_START_BIT_PULSE_LEN_MIN, MATSUSHITA_START_BIT_PULSE_LEN_MAX, MATSUSHITA_START_BIT_PAUSE_LEN_MIN, MATSUSHITA_START_BIT_PAUSE_LEN_MAX, |
MATSUSHITA_PULSE_LEN_MIN, MATSUSHITA_PULSE_LEN_MAX, MATSUSHITA_0_PAUSE_LEN_MIN, MATSUSHITA_0_PAUSE_LEN_MAX, |
MATSUSHITA_PULSE_LEN_MIN, MATSUSHITA_PULSE_LEN_MAX, MATSUSHITA_1_PAUSE_LEN_MIN, MATSUSHITA_1_PAUSE_LEN_MAX); |
|
printf ("KASEIKYO 1 %3d - %3d %3d - %3d %3d - %3d %3d - %3d %3d - %3d %3d - %3d\n", |
KASEIKYO_START_BIT_PULSE_LEN_MIN, KASEIKYO_START_BIT_PULSE_LEN_MAX, KASEIKYO_START_BIT_PAUSE_LEN_MIN, KASEIKYO_START_BIT_PAUSE_LEN_MAX, |
KASEIKYO_PULSE_LEN_MIN, KASEIKYO_PULSE_LEN_MAX, KASEIKYO_0_PAUSE_LEN_MIN, KASEIKYO_0_PAUSE_LEN_MAX, |
KASEIKYO_PULSE_LEN_MIN, KASEIKYO_PULSE_LEN_MAX, KASEIKYO_1_PAUSE_LEN_MIN, KASEIKYO_1_PAUSE_LEN_MAX); |
|
printf ("RECS80 1 %3d - %3d %3d - %3d %3d - %3d %3d - %3d %3d - %3d %3d - %3d\n", |
RECS80_START_BIT_PULSE_LEN_MIN, RECS80_START_BIT_PULSE_LEN_MAX, RECS80_START_BIT_PAUSE_LEN_MIN, RECS80_START_BIT_PAUSE_LEN_MAX, |
RECS80_PULSE_LEN_MIN, RECS80_PULSE_LEN_MAX, RECS80_0_PAUSE_LEN_MIN, RECS80_0_PAUSE_LEN_MAX, |
RECS80_PULSE_LEN_MIN, RECS80_PULSE_LEN_MAX, RECS80_1_PAUSE_LEN_MIN, RECS80_1_PAUSE_LEN_MAX); |
|
printf ("RC5 1 %3d - %3d %3d - %3d %3d - %3d\n", |
RC5_START_BIT_LEN_MIN, RC5_START_BIT_LEN_MAX, RC5_START_BIT_LEN_MIN, RC5_START_BIT_LEN_MAX, |
RC5_BIT_LEN_MIN, RC5_BIT_LEN_MAX); |
|
printf ("DENON 1 %3d - %3d %3d - %3d %3d - %3d %3d - %3d %3d - %3d\n", |
DENON_PULSE_LEN_MIN, DENON_PULSE_LEN_MAX, |
DENON_PULSE_LEN_MIN, DENON_PULSE_LEN_MAX, DENON_0_PAUSE_LEN_MIN, DENON_0_PAUSE_LEN_MAX, |
DENON_PULSE_LEN_MIN, DENON_PULSE_LEN_MAX, DENON_1_PAUSE_LEN_MIN, DENON_1_PAUSE_LEN_MAX); |
|
printf ("RC6 1 %3d - %3d %3d - %3d %3d - %3d %3d - %3d\n", |
RC6_START_BIT_PULSE_LEN_MIN, RC6_START_BIT_PULSE_LEN_MAX, RC6_START_BIT_PAUSE_LEN_MIN, RC6_START_BIT_PAUSE_LEN_MAX, |
RC6_BIT_PULSE_LEN_MIN, RC6_BIT_PULSE_LEN_MAX, RC6_BIT_PAUSE_LEN_MIN, RC6_BIT_PAUSE_LEN_MAX); |
|
printf ("RECS80EXT 1 %3d - %3d %3d - %3d %3d - %3d %3d - %3d %3d - %3d %3d - %3d\n", |
RECS80EXT_START_BIT_PULSE_LEN_MIN, RECS80EXT_START_BIT_PULSE_LEN_MAX, RECS80EXT_START_BIT_PAUSE_LEN_MIN, RECS80EXT_START_BIT_PAUSE_LEN_MAX, |
RECS80EXT_PULSE_LEN_MIN, RECS80EXT_PULSE_LEN_MAX, RECS80EXT_0_PAUSE_LEN_MIN, RECS80EXT_0_PAUSE_LEN_MAX, |
RECS80EXT_PULSE_LEN_MIN, RECS80EXT_PULSE_LEN_MAX, RECS80EXT_1_PAUSE_LEN_MIN, RECS80EXT_1_PAUSE_LEN_MAX); |
|
printf ("NUBERT 1 %3d - %3d %3d - %3d %3d - %3d %3d - %3d %3d - %3d %3d - %3d\n", |
NUBERT_START_BIT_PULSE_LEN_MIN, NUBERT_START_BIT_PULSE_LEN_MAX, NUBERT_START_BIT_PAUSE_LEN_MIN, NUBERT_START_BIT_PAUSE_LEN_MAX, |
NUBERT_0_PULSE_LEN_MIN, NUBERT_0_PULSE_LEN_MAX, NUBERT_0_PAUSE_LEN_MIN, NUBERT_0_PAUSE_LEN_MAX, |
NUBERT_1_PULSE_LEN_MIN, NUBERT_1_PULSE_LEN_MAX, NUBERT_1_PAUSE_LEN_MIN, NUBERT_1_PAUSE_LEN_MAX); |
|
printf ("BANG_OLUFSEN 1 %3d - %3d %3d - %3d\n", |
BANG_OLUFSEN_START_BIT1_PULSE_LEN_MIN, BANG_OLUFSEN_START_BIT1_PULSE_LEN_MAX, |
BANG_OLUFSEN_START_BIT1_PAUSE_LEN_MIN, BANG_OLUFSEN_START_BIT1_PAUSE_LEN_MAX); |
|
printf ("BANG_OLUFSEN 2 %3d - %3d %3d - %3d\n", |
BANG_OLUFSEN_START_BIT2_PULSE_LEN_MIN, BANG_OLUFSEN_START_BIT2_PULSE_LEN_MAX, |
BANG_OLUFSEN_START_BIT2_PAUSE_LEN_MIN, BANG_OLUFSEN_START_BIT2_PAUSE_LEN_MAX); |
|
printf ("BANG_OLUFSEN 3 %3d - %3d %3d - %3d\n", |
BANG_OLUFSEN_START_BIT3_PULSE_LEN_MIN, BANG_OLUFSEN_START_BIT3_PULSE_LEN_MAX, |
BANG_OLUFSEN_START_BIT3_PAUSE_LEN_MIN, BANG_OLUFSEN_START_BIT3_PAUSE_LEN_MAX); |
|
printf ("BANG_OLUFSEN 4 %3d - %3d %3d - %3d\n", |
BANG_OLUFSEN_START_BIT4_PULSE_LEN_MIN, BANG_OLUFSEN_START_BIT4_PULSE_LEN_MAX, |
BANG_OLUFSEN_START_BIT4_PAUSE_LEN_MIN, BANG_OLUFSEN_START_BIT4_PAUSE_LEN_MAX); |
|
printf ("BANG_OLUFSEN - %3d - %3d %3d - %3d %3d - %3d %3d - %3d\n", |
BANG_OLUFSEN_PULSE_LEN_MIN, BANG_OLUFSEN_PULSE_LEN_MAX, BANG_OLUFSEN_0_PAUSE_LEN_MIN, BANG_OLUFSEN_0_PAUSE_LEN_MAX, |
BANG_OLUFSEN_PULSE_LEN_MIN, BANG_OLUFSEN_PULSE_LEN_MAX, BANG_OLUFSEN_1_PAUSE_LEN_MIN, BANG_OLUFSEN_1_PAUSE_LEN_MAX); |
|
printf ("GRUNDIG/NOKIA 1 %3d - %3d %3d - %3d %3d - %3d\n", |
GRUNDIG_OR_NOKIA_START_BIT_LEN_MIN, GRUNDIG_OR_NOKIA_START_BIT_LEN_MAX, GRUNDIG_OR_NOKIA_PRE_PAUSE_LEN_MIN, GRUNDIG_OR_NOKIA_PRE_PAUSE_LEN_MAX, |
GRUNDIG_OR_NOKIA_BIT_LEN_MIN, GRUNDIG_OR_NOKIA_BIT_LEN_MAX); |
|
printf ("SIEMENS 1 %3d - %3d %3d - %3d %3d - %3d\n", |
SIEMENS_START_BIT_LEN_MIN, SIEMENS_START_BIT_LEN_MAX, SIEMENS_START_BIT_LEN_MIN, SIEMENS_START_BIT_LEN_MAX, |
SIEMENS_BIT_LEN_MIN, SIEMENS_BIT_LEN_MAX); |
|
printf ("FDC 1 %3d - %3d %3d - %3d %3d - %3d %3d - %3d %3d - %3d %3d - %3d\n", |
FDC_START_BIT_PULSE_LEN_MIN, FDC_START_BIT_PULSE_LEN_MAX, FDC_START_BIT_PAUSE_LEN_MIN, FDC_START_BIT_PAUSE_LEN_MAX, |
FDC_PULSE_LEN_MIN, FDC_PULSE_LEN_MAX, FDC_0_PAUSE_LEN_MIN, FDC_0_PAUSE_LEN_MAX, |
FDC_PULSE_LEN_MIN, FDC_PULSE_LEN_MAX, FDC_1_PAUSE_LEN_MIN, FDC_1_PAUSE_LEN_MAX); |
|
printf ("RCCAR 1 %3d - %3d %3d - %3d %3d - %3d %3d - %3d %3d - %3d %3d - %3d\n", |
RCCAR_START_BIT_PULSE_LEN_MIN, RCCAR_START_BIT_PULSE_LEN_MAX, RCCAR_START_BIT_PAUSE_LEN_MIN, RCCAR_START_BIT_PAUSE_LEN_MAX, |
RCCAR_PULSE_LEN_MIN, RCCAR_PULSE_LEN_MAX, RCCAR_0_PAUSE_LEN_MIN, RCCAR_0_PAUSE_LEN_MAX, |
RCCAR_PULSE_LEN_MIN, RCCAR_PULSE_LEN_MAX, RCCAR_1_PAUSE_LEN_MIN, RCCAR_1_PAUSE_LEN_MAX); |
|
printf ("NIKON 1 %3d - %3d %3d - %3d %3d - %3d %3d - %3d %3d - %3d %3d - %3d\n", |
NIKON_START_BIT_PULSE_LEN_MIN, NIKON_START_BIT_PULSE_LEN_MAX, NIKON_START_BIT_PAUSE_LEN_MIN, NIKON_START_BIT_PAUSE_LEN_MAX, |
NIKON_PULSE_LEN_MIN, NIKON_PULSE_LEN_MAX, NIKON_0_PAUSE_LEN_MIN, NIKON_0_PAUSE_LEN_MAX, |
NIKON_PULSE_LEN_MIN, NIKON_PULSE_LEN_MAX, NIKON_1_PAUSE_LEN_MIN, NIKON_1_PAUSE_LEN_MAX); |
|
} |
|
void |
print_spectrum (char * text, int * buf, int is_pulse) |
{ |
int i; |
int j; |
int min; |
int max; |
int max_value = 0; |
int value; |
int sum = 0; |
int counter = 0; |
double average = 0; |
double tolerance; |
|
puts ("-------------------------------------------------------------------------------"); |
printf ("%s:\n", text); |
|
for (i = 0; i < 256; i++) |
{ |
if (buf[i] > max_value) |
{ |
max_value = buf[i]; |
} |
} |
|
for (i = 0; i < 100; i++) |
{ |
if (buf[i] > 0) |
{ |
printf ("%3d ", i); |
value = (buf[i] * 60) / max_value; |
|
for (j = 0; j < value; j++) |
{ |
putchar ('o'); |
} |
printf (" %d\n", buf[i]); |
|
sum += i * buf[i]; |
counter += buf[i]; |
} |
else |
{ |
max = i - 1; |
|
if (counter > 0) |
{ |
average = (float) sum / (float) counter; |
|
if (is_pulse) |
{ |
printf ("pulse "); |
} |
else |
{ |
printf ("pause "); |
} |
|
printf ("avg: %4.1f=%6.1f us, ", average, (1000000. * average) / (float) F_INTERRUPTS); |
printf ("min: %2d=%6.1f us, ", min, (1000000. * min) / (float) F_INTERRUPTS); |
printf ("max: %2d=%6.1f us, ", max, (1000000. * max) / (float) F_INTERRUPTS); |
|
tolerance = (max - average); |
|
if (average - min > tolerance) |
{ |
tolerance = average - min; |
} |
|
tolerance = tolerance * 100 / average; |
printf ("tol: %4.1f%%\n", tolerance); |
} |
|
counter = 0; |
sum = 0; |
min = i + 1; |
} |
} |
} |
|
#define STATE_LEFT_SHIFT 0x01 |
#define STATE_RIGHT_SHIFT 0x02 |
#define STATE_LEFT_CTRL 0x04 |
#define STATE_LEFT_ALT 0x08 |
#define STATE_RIGHT_ALT 0x10 |
|
#define KEY_ESCAPE 0x1B // keycode = 0x006e |
#define KEY_MENUE 0x80 // keycode = 0x0070 |
#define KEY_BACK 0x81 // keycode = 0x0071 |
#define KEY_FORWARD 0x82 // keycode = 0x0072 |
#define KEY_ADDRESS 0x83 // keycode = 0x0073 |
#define KEY_WINDOW 0x84 // keycode = 0x0074 |
#define KEY_1ST_PAGE 0x85 // keycode = 0x0075 |
#define KEY_STOP 0x86 // keycode = 0x0076 |
#define KEY_MAIL 0x87 // keycode = 0x0077 |
#define KEY_FAVORITES 0x88 // keycode = 0x0078 |
#define KEY_NEW_PAGE 0x89 // keycode = 0x0079 |
#define KEY_SETUP 0x8A // keycode = 0x007a |
#define KEY_FONT 0x8B // keycode = 0x007b |
#define KEY_PRINT 0x8C // keycode = 0x007c |
#define KEY_ON_OFF 0x8E // keycode = 0x007c |
|
#define KEY_INSERT 0x90 // keycode = 0x004b |
#define KEY_DELETE 0x91 // keycode = 0x004c |
#define KEY_LEFT 0x92 // keycode = 0x004f |
#define KEY_HOME 0x93 // keycode = 0x0050 |
#define KEY_END 0x94 // keycode = 0x0051 |
#define KEY_UP 0x95 // keycode = 0x0053 |
#define KEY_DOWN 0x96 // keycode = 0x0054 |
#define KEY_PAGE_UP 0x97 // keycode = 0x0055 |
#define KEY_PAGE_DOWN 0x98 // keycode = 0x0056 |
#define KEY_RIGHT 0x99 // keycode = 0x0059 |
#define KEY_MOUSE_1 0x9E // keycode = 0x0400 |
#define KEY_MOUSE_2 0x9F // keycode = 0x0800 |
|
static uint8_t |
get_fdc_key (uint16_t cmd) |
{ |
static uint8_t key_table[128] = |
{ |
// 0 1 2 3 4 5 6 7 8 9 A B C D E F |
0, '^', '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', 'ß', '´', 0, '\b', |
'\t','q', 'w', 'e', 'r', 't', 'z', 'u', 'i', 'o', 'p', 'ü', '+', 0, 0, 'a', |
's', 'd', 'f', 'g', 'h', 'j', 'k', 'l', 'ö', 'ä', '#', '\r', 0, '<', 'y', 'x', |
'c', 'v', 'b', 'n', 'm', ',', '.', '-', 0, 0, 0, 0, 0, ' ', 0, 0, |
|
0, '°', '!', '"', '§', '$', '%', '&', '/', '(', ')', '=', '?', '`', 0, '\b', |
'\t','Q', 'W', 'E', 'R', 'T', 'Z', 'U', 'I', 'O', 'P', 'Ü', '*', 0, 0, 'A', |
'S', 'D', 'F', 'G', 'H', 'J', 'K', 'L', 'Ö', 'Ä', '\'','\r', 0, '>', 'Y', 'X', |
'C', 'V', 'B', 'N', 'M', ';', ':', '_', 0, 0, 0, 0, 0, ' ', 0, 0 |
}; |
static uint8_t state; |
|
uint8_t key = 0; |
|
switch (cmd) |
{ |
case 0x002C: state |= STATE_LEFT_SHIFT; break; // pressed left shift |
case 0x00AC: state &= ~STATE_LEFT_SHIFT; break; // released left shift |
case 0x0039: state |= STATE_RIGHT_SHIFT; break; // pressed right shift |
case 0x00B9: state &= ~STATE_RIGHT_SHIFT; break; // released right shift |
case 0x003A: state |= STATE_LEFT_CTRL; break; // pressed left ctrl |
case 0x00BA: state &= ~STATE_LEFT_CTRL; break; // released left ctrl |
case 0x003C: state |= STATE_LEFT_ALT; break; // pressed left alt |
case 0x00BC: state &= ~STATE_LEFT_ALT; break; // released left alt |
case 0x003E: state |= STATE_RIGHT_ALT; break; // pressed left alt |
case 0x00BE: state &= ~STATE_RIGHT_ALT; break; // released left alt |
|
case 0x006e: key = KEY_ESCAPE; break; |
case 0x004b: key = KEY_INSERT; break; |
case 0x004c: key = KEY_DELETE; break; |
case 0x004f: key = KEY_LEFT; break; |
case 0x0050: key = KEY_HOME; break; |
case 0x0051: key = KEY_END; break; |
case 0x0053: key = KEY_UP; break; |
case 0x0054: key = KEY_DOWN; break; |
case 0x0055: key = KEY_PAGE_UP; break; |
case 0x0056: key = KEY_PAGE_DOWN; break; |
case 0x0059: key = KEY_RIGHT; break; |
case 0x0400: key = KEY_MOUSE_1; break; |
case 0x0800: key = KEY_MOUSE_2; break; |
|
default: |
{ |
if (!(cmd & 0x80)) // pressed key |
{ |
if (cmd >= 0x70 && cmd <= 0x7F) // function keys |
{ |
key = cmd + 0x10; // 7x -> 8x |
} |
else if (cmd < 64) // key listed in key_table |
{ |
if (state & (STATE_LEFT_ALT | STATE_RIGHT_ALT)) |
{ |
switch (cmd) |
{ |
case 0x0003: key = '²'; break; |
case 0x0008: key = '{'; break; |
case 0x0009: key = '['; break; |
case 0x000A: key = ']'; break; |
case 0x000B: key = '}'; break; |
case 0x000C: key = '\\'; break; |
case 0x001C: key = '~'; break; |
case 0x002D: key = '|'; break; |
case 0x0034: key = 'µ'; break; |
} |
} |
else if (state & (STATE_LEFT_CTRL)) |
{ |
if (key_table[cmd] >= 'a' && key_table[cmd] <= 'z') |
{ |
key = key_table[cmd] - 'a' + 1; |
} |
else |
{ |
key = key_table[cmd]; |
} |
} |
else |
{ |
int idx = cmd + ((state & (STATE_LEFT_SHIFT | STATE_RIGHT_SHIFT)) ? 64 : 0); |
|
if (key_table[idx]) |
{ |
key = key_table[idx]; |
} |
} |
} |
} |
break; |
} |
} |
|
return (key); |
} |
|
static int analyze = FALSE; |
static int list = FALSE; |
static IRMP_DATA irmp_data; |
|
static void |
next_tick (void) |
{ |
if (! analyze && ! list) |
{ |
(void) irmp_ISR (); |
|
if (irmp_get_data (&irmp_data)) |
{ |
uint8_t key; |
|
ANALYZE_ONLY_NORMAL_PUTCHAR (' '); |
|
if (verbose) |
{ |
printf ("%8d ", time_counter); |
} |
|
if (irmp_data.protocol == IRMP_FDC_PROTOCOL && (key = get_fdc_key (irmp_data.command)) != 0) |
{ |
if ((key >= 0x20 && key < 0x7F) || key >= 0xA0) |
{ |
printf ("p = %2d, a = 0x%04x, c = 0x%04x, f = 0x%02x, asc = 0x%02x, key = '%c'\n", |
irmp_data.protocol, irmp_data.address, irmp_data.command, irmp_data.flags, key, key); |
} |
else if (key == '\r' || key == '\t' || key == KEY_ESCAPE || (key >= 0x80 && key <= 0x9F)) // function keys |
{ |
char * p = (char *) NULL; |
|
switch (key) |
{ |
case '\t' : p = "TAB"; break; |
case '\r' : p = "CR"; break; |
case KEY_ESCAPE : p = "ESCAPE"; break; |
case KEY_MENUE : p = "MENUE"; break; |
case KEY_BACK : p = "BACK"; break; |
case KEY_FORWARD : p = "FORWARD"; break; |
case KEY_ADDRESS : p = "ADDRESS"; break; |
case KEY_WINDOW : p = "WINDOW"; break; |
case KEY_1ST_PAGE : p = "1ST_PAGE"; break; |
case KEY_STOP : p = "STOP"; break; |
case KEY_MAIL : p = "MAIL"; break; |
case KEY_FAVORITES : p = "FAVORITES"; break; |
case KEY_NEW_PAGE : p = "NEW_PAGE"; break; |
case KEY_SETUP : p = "SETUP"; break; |
case KEY_FONT : p = "FONT"; break; |
case KEY_PRINT : p = "PRINT"; break; |
case KEY_ON_OFF : p = "ON_OFF"; break; |
|
case KEY_INSERT : p = "INSERT"; break; |
case KEY_DELETE : p = "DELETE"; break; |
case KEY_LEFT : p = "LEFT"; break; |
case KEY_HOME : p = "HOME"; break; |
case KEY_END : p = "END"; break; |
case KEY_UP : p = "UP"; break; |
case KEY_DOWN : p = "DOWN"; break; |
case KEY_PAGE_UP : p = "PAGE_UP"; break; |
case KEY_PAGE_DOWN : p = "PAGE_DOWN"; break; |
case KEY_RIGHT : p = "RIGHT"; break; |
case KEY_MOUSE_1 : p = "KEY_MOUSE_1"; break; |
case KEY_MOUSE_2 : p = "KEY_MOUSE_2"; break; |
default : p = "<UNKNWON>"; break; |
} |
|
printf ("p = %2d, a = 0x%04x, c = 0x%04x, f = 0x%02x, asc = 0x%02x, key = %s\n", |
irmp_data.protocol, irmp_data.address, irmp_data.command, irmp_data.flags, key, p); |
} |
else |
{ |
printf ("p = %2d, a = 0x%04x, c = 0x%04x, f = 0x%02x, asc = 0x%02x\n", |
irmp_data.protocol, irmp_data.address, irmp_data.command, irmp_data.flags, key); |
} |
} |
else |
{ |
printf ("p = %2d, a = 0x%04x, c = 0x%04x, f = 0x%02x\n", |
irmp_data.protocol, irmp_data.address, irmp_data.command, irmp_data.flags); |
} |
} |
} |
} |
|
int |
main (int argc, char ** argv) |
{ |
int i; |
int ch; |
int last_ch = 0; |
int pulse = 0; |
int pause = 0; |
|
int start_pulses[256]; |
int start_pauses[256]; |
int pulses[256]; |
int pauses[256]; |
|
int first_pulse = TRUE; |
int first_pause = TRUE; |
|
if (argc == 2) |
{ |
if (! strcmp (argv[1], "-v")) |
{ |
verbose = TRUE; |
} |
else if (! strcmp (argv[1], "-l")) |
{ |
list = TRUE; |
} |
else if (! strcmp (argv[1], "-a")) |
{ |
analyze = TRUE; |
} |
else if (! strcmp (argv[1], "-s")) |
{ |
silent = TRUE; |
} |
else if (! strcmp (argv[1], "-p")) |
{ |
print_timings (); |
return (0); |
} |
} |
|
for (i = 0; i < 256; i++) |
{ |
start_pulses[i] = 0; |
start_pauses[i] = 0; |
pulses[i] = 0; |
pauses[i] = 0; |
} |
|
IRMP_PIN = 0xFF; |
|
while ((ch = getchar ()) != EOF) |
{ |
if (ch == '_' || ch == '0') |
{ |
if (last_ch != ch) |
{ |
if (pause > 0) |
{ |
if (list) |
{ |
printf ("pause: %d\n", pause); |
} |
|
if (analyze) |
{ |
if (first_pause) |
{ |
if (pause < 256) |
{ |
start_pauses[pause]++; |
} |
first_pause = FALSE; |
} |
else |
{ |
if (pause < 256) |
{ |
pauses[pause]++; |
} |
} |
} |
} |
pause = 0; |
} |
pulse++; |
IRMP_PIN = 0x00; |
} |
else if (ch == 0xaf || ch == '-' || ch == '1') |
{ |
if (last_ch != ch) |
{ |
if (list) |
{ |
printf ("pulse: %d ", pulse); |
} |
|
if (analyze) |
{ |
if (first_pulse) |
{ |
if (pulse < 256) |
{ |
start_pulses[pulse]++; |
} |
first_pulse = FALSE; |
} |
else |
{ |
if (pulse < 256) |
{ |
pulses[pulse]++; |
} |
} |
} |
pulse = 0; |
} |
|
pause++; |
IRMP_PIN = 0xff; |
} |
else if (ch == '\n') |
{ |
IRMP_PIN = 0xff; |
|
if (list && pause > 0) |
{ |
printf ("pause: %d\n", pause); |
} |
pause = 0; |
|
if (! analyze) |
{ |
for (i = 0; i < (int) ((8000.0 * F_INTERRUPTS) / 10000); i++) // newline: long pause of 800 msec |
{ |
next_tick (); |
} |
} |
first_pulse = TRUE; |
first_pause = TRUE; |
} |
else if (ch == '#') |
{ |
if (analyze) |
{ |
while ((ch = getchar()) != '\n' && ch != EOF) |
{ |
; |
} |
} |
else |
{ |
puts ("-------------------------------------------------------------------"); |
putchar (ch); |
|
while ((ch = getchar()) != '\n' && ch != EOF) |
{ |
if (ch != '\r') // ignore CR in DOS/Windows files |
{ |
putchar (ch); |
} |
} |
putchar ('\n'); |
} |
|
} |
|
last_ch = ch; |
|
next_tick (); |
} |
|
if (analyze) |
{ |
print_spectrum ("START PULSES", start_pulses, TRUE); |
print_spectrum ("START PAUSES", start_pauses, FALSE); |
print_spectrum ("PULSES", pulses, TRUE); |
print_spectrum ("PAUSES", pauses, FALSE); |
puts ("-------------------------------------------------------------------------------"); |
} |
return 0; |
} |
|
#endif // ANALYZE |