0,0 → 1,168 |
/* Copyright 2009-2011 Oleg Mazurov, Circuits At Home, http://www.circuitsathome.com */ |
/* USB chapter 9 structures */ |
#ifndef _ch9_h_ |
#define _ch9_h_ |
|
/* Misc.USB constants */ |
#define DEV_DESCR_LEN 18 //device descriptor length |
#define CONF_DESCR_LEN 9 //configuration descriptor length |
#define INTR_DESCR_LEN 9 //interface descriptor length |
#define EP_DESCR_LEN 7 //endpoint descriptor length |
|
/* Standard Device Requests */ |
|
#define USB_REQUEST_GET_STATUS 0 // Standard Device Request - GET STATUS |
#define USB_REQUEST_CLEAR_FEATURE 1 // Standard Device Request - CLEAR FEATURE |
#define USB_REQUEST_SET_FEATURE 3 // Standard Device Request - SET FEATURE |
#define USB_REQUEST_SET_ADDRESS 5 // Standard Device Request - SET ADDRESS |
#define USB_REQUEST_GET_DESCRIPTOR 6 // Standard Device Request - GET DESCRIPTOR |
#define USB_REQUEST_SET_DESCRIPTOR 7 // Standard Device Request - SET DESCRIPTOR |
#define USB_REQUEST_GET_CONFIGURATION 8 // Standard Device Request - GET CONFIGURATION |
#define USB_REQUEST_SET_CONFIGURATION 9 // Standard Device Request - SET CONFIGURATION |
#define USB_REQUEST_GET_INTERFACE 10 // Standard Device Request - GET INTERFACE |
#define USB_REQUEST_SET_INTERFACE 11 // Standard Device Request - SET INTERFACE |
#define USB_REQUEST_SYNCH_FRAME 12 // Standard Device Request - SYNCH FRAME |
|
#define USB_FEATURE_ENDPOINT_HALT 0 // CLEAR/SET FEATURE - Endpoint Halt |
#define USB_FEATURE_DEVICE_REMOTE_WAKEUP 1 // CLEAR/SET FEATURE - Device remote wake-up |
#define USB_FEATURE_TEST_MODE 2 // CLEAR/SET FEATURE - Test mode |
|
/* Setup Data Constants */ |
|
#define USB_SETUP_HOST_TO_DEVICE 0x00 // Device Request bmRequestType transfer direction - host to device transfer |
#define USB_SETUP_DEVICE_TO_HOST 0x80 // Device Request bmRequestType transfer direction - device to host transfer |
#define USB_SETUP_TYPE_STANDARD 0x00 // Device Request bmRequestType type - standard |
#define USB_SETUP_TYPE_CLASS 0x20 // Device Request bmRequestType type - class |
#define USB_SETUP_TYPE_VENDOR 0x40 // Device Request bmRequestType type - vendor |
#define USB_SETUP_RECIPIENT_DEVICE 0x00 // Device Request bmRequestType recipient - device |
#define USB_SETUP_RECIPIENT_INTERFACE 0x01 // Device Request bmRequestType recipient - interface |
#define USB_SETUP_RECIPIENT_ENDPOINT 0x02 // Device Request bmRequestType recipient - endpoint |
#define USB_SETUP_RECIPIENT_OTHER 0x03 // Device Request bmRequestType recipient - other |
|
/* USB descriptors */ |
|
#define USB_DESCRIPTOR_DEVICE 0x01 // bDescriptorType for a Device Descriptor. |
#define USB_DESCRIPTOR_CONFIGURATION 0x02 // bDescriptorType for a Configuration Descriptor. |
#define USB_DESCRIPTOR_STRING 0x03 // bDescriptorType for a String Descriptor. |
#define USB_DESCRIPTOR_INTERFACE 0x04 // bDescriptorType for an Interface Descriptor. |
#define USB_DESCRIPTOR_ENDPOINT 0x05 // bDescriptorType for an Endpoint Descriptor. |
#define USB_DESCRIPTOR_DEVICE_QUALIFIER 0x06 // bDescriptorType for a Device Qualifier. |
#define USB_DESCRIPTOR_OTHER_SPEED 0x07 // bDescriptorType for a Other Speed Configuration. |
#define USB_DESCRIPTOR_INTERFACE_POWER 0x08 // bDescriptorType for Interface Power. |
#define USB_DESCRIPTOR_OTG 0x09 // bDescriptorType for an OTG Descriptor. |
|
/* OTG SET FEATURE Constants */ |
#define OTG_FEATURE_B_HNP_ENABLE 3 // SET FEATURE OTG - Enable B device to perform HNP |
#define OTG_FEATURE_A_HNP_SUPPORT 4 // SET FEATURE OTG - A device supports HNP |
#define OTG_FEATURE_A_ALT_HNP_SUPPORT 5 // SET FEATURE OTG - Another port on the A device supports HNP |
|
/* USB Endpoint Transfer Types */ |
#define USB_TRANSFER_TYPE_CONTROL 0x00 // Endpoint is a control endpoint. |
#define USB_TRANSFER_TYPE_ISOCHRONOUS 0x01 // Endpoint is an isochronous endpoint. |
#define USB_TRANSFER_TYPE_BULK 0x02 // Endpoint is a bulk endpoint. |
#define USB_TRANSFER_TYPE_INTERRUPT 0x03 // Endpoint is an interrupt endpoint. |
#define bmUSB_TRANSFER_TYPE 0x03 // bit mask to separate transfer type from ISO attributes |
|
|
/* Standard Feature Selectors for CLEAR_FEATURE Requests */ |
#define USB_FEATURE_ENDPOINT_STALL 0 // Endpoint recipient |
#define USB_FEATURE_DEVICE_REMOTE_WAKEUP 1 // Device recipient |
#define USB_FEATURE_TEST_MODE 2 // Device recipient |
|
/* HID constants. Not part of chapter 9 */ |
/* Class-Specific Requests */ |
#define HID_REQUEST_GET_REPORT 0x01 |
#define HID_REQUEST_GET_IDLE 0x02 |
#define HID_REQUEST_GET_PROTOCOL 0x03 |
#define HID_REQUEST_SET_REPORT 0x09 |
#define HID_REQUEST_SET_IDLE 0x0A |
#define HID_REQUEST_SET_PROTOCOL 0x0B |
|
/* Class Descriptor Types */ |
#define HID_DESCRIPTOR_HID 0x21 |
#define HID_DESCRIPTOR_REPORT 0x22 |
#define HID_DESRIPTOR_PHY 0x23 |
|
/* Protocol Selection */ |
#define BOOT_PROTOCOL 0x00 |
#define RPT_PROTOCOL 0x01 |
/* HID Interface Class Code */ |
#define HID_INTF 0x03 |
/* HID Interface Class SubClass Codes */ |
#define BOOT_INTF_SUBCLASS 0x01 |
/* HID Interface Class Protocol Codes */ |
#define HID_PROTOCOL_NONE 0x00 |
#define HID_PROTOCOL_KEYBOARD 0x01 |
#define HID_PROTOCOL_MOUSE 0x02 |
|
|
/* descriptor data structures */ |
|
/* Device descriptor structure */ |
typedef struct { |
byte bLength; // Length of this descriptor. |
byte bDescriptorType; // DEVICE descriptor type (USB_DESCRIPTOR_DEVICE). |
unsigned int bcdUSB; // USB Spec Release Number (BCD). |
byte bDeviceClass; // Class code (assigned by the USB-IF). 0xFF-Vendor specific. |
byte bDeviceSubClass; // Subclass code (assigned by the USB-IF). |
byte bDeviceProtocol; // Protocol code (assigned by the USB-IF). 0xFF-Vendor specific. |
byte bMaxPacketSize0; // Maximum packet size for endpoint 0. |
unsigned int idVendor; // Vendor ID (assigned by the USB-IF). |
unsigned int idProduct; // Product ID (assigned by the manufacturer). |
unsigned int bcdDevice; // Device release number (BCD). |
byte iManufacturer; // Index of String Descriptor describing the manufacturer. |
byte iProduct; // Index of String Descriptor describing the product. |
byte iSerialNumber; // Index of String Descriptor with the device's serial number. |
byte bNumConfigurations; // Number of possible configurations. |
} USB_DEVICE_DESCRIPTOR; |
|
/* Configuration descriptor structure */ |
typedef struct |
{ |
byte bLength; // Length of this descriptor. |
byte bDescriptorType; // CONFIGURATION descriptor type (USB_DESCRIPTOR_CONFIGURATION). |
unsigned int wTotalLength; // Total length of all descriptors for this configuration. |
byte bNumInterfaces; // Number of interfaces in this configuration. |
byte bConfigurationValue; // Value of this configuration (1 based). |
byte iConfiguration; // Index of String Descriptor describing the configuration. |
byte bmAttributes; // Configuration characteristics. |
byte bMaxPower; // Maximum power consumed by this configuration. |
} USB_CONFIGURATION_DESCRIPTOR; |
|
/* Interface descriptor structure */ |
typedef struct |
{ |
byte bLength; // Length of this descriptor. |
byte bDescriptorType; // INTERFACE descriptor type (USB_DESCRIPTOR_INTERFACE). |
byte bInterfaceNumber; // Number of this interface (0 based). |
byte bAlternateSetting; // Value of this alternate interface setting. |
byte bNumEndpoints; // Number of endpoints in this interface. |
byte bInterfaceClass; // Class code (assigned by the USB-IF). 0xFF-Vendor specific. |
byte bInterfaceSubClass; // Subclass code (assigned by the USB-IF). |
byte bInterfaceProtocol; // Protocol code (assigned by the USB-IF). 0xFF-Vendor specific. |
byte iInterface; // Index of String Descriptor describing the interface. |
} USB_INTERFACE_DESCRIPTOR; |
|
/* Endpoint descriptor structure */ |
typedef struct |
{ |
byte bLength; // Length of this descriptor. |
byte bDescriptorType; // ENDPOINT descriptor type (USB_DESCRIPTOR_ENDPOINT). |
byte bEndpointAddress; // Endpoint address. Bit 7 indicates direction (0=OUT, 1=IN). |
byte bmAttributes; // Endpoint transfer type. |
unsigned int wMaxPacketSize; // Maximum packet size. |
byte bInterval; // Polling interval in frames. |
} USB_ENDPOINT_DESCRIPTOR; |
|
/* HID descriptor */ |
typedef struct { |
byte bLength; |
byte bDescriptorType; |
unsigned int bcdHID; |
byte bCountryCode; |
byte bNumDescriptors; |
byte bDescrType; |
unsigned int wDescriptorLength; |
} USB_HID_DESCRIPTOR; |
|
#endif // _ch9_h_ |