0,0 → 1,281 |
/**************************************************************************** |
* Copyright (C) 2011 by Claas Anders "CaScAdE" Rathje * |
* admiralcascade@gmail.com * |
* Project-URL: http://www.mylifesucks.de/oss/c-epilepsy/ * |
* * |
* This program is free software; you can redistribute it and/or modify * |
* it under the terms of the GNU General Public License as published by * |
* the Free Software Foundation; either version 2 of the License. * |
* * |
* This program is distributed in the hope that it will be useful, * |
* but WITHOUT ANY WARRANTY; without even the implied warranty of * |
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * |
* GNU General Public License for more details. * |
* * |
* You should have received a copy of the GNU General Public License * |
* along with this program; if not, write to the * |
* Free Software Foundation, Inc., * |
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * |
****************************************************************************/ |
|
#ifndef _MK_DATA_STRUCTS_H |
#define _MK_DATA_STRUCTS_H |
|
/* ########################################################################## |
* gain some fake arm compat :) |
* ##########################################################################*/ |
#define u8 uint8_t |
#define s8 int8_t |
#define u16 uint16_t |
#define s16 int16_t |
#define u32 uint32_t |
#define s32 int32_t |
|
/** |
* MikroKopter Slave-Addresses |
* portions taken and adapted from |
* http://svn.mikrokopter.de/filedetails.php?repname=NaviCtrl&path=/tags/V0.22a/mkprotocol.h |
*/ |
#define ANY_ADDRESS 0 |
#define FC_ADDRESS 1 |
#define NC_ADDRESS 2 |
#define MK3MAG_ADDRESS 3 |
#define MKOSD_ADDRESS 4 |
#define BL_ADDRESS 5 |
|
/* |
* FC Debug Struct |
* portions taken and adapted from |
* http://svn.mikrokopter.de/filedetails.php?repname=FlightCtrl&path=/tags/V0.80d/uart.h |
*/ |
typedef struct { |
unsigned char Status[2]; |
signed int Analog[32]; // Debugwerte |
} __attribute__((packed)) str_DebugOut; |
|
typedef struct { |
unsigned char SWMajor; |
unsigned char SWMinor; |
unsigned char ProtoMajor; |
unsigned char ProtoMinor; |
unsigned char SWPatch; |
unsigned char HardwareError[5]; |
} __attribute__((packed)) str_VersionInfo; |
|
/* |
* NaviCtrl GPS Structs |
* portions taken and adapted from |
* http://svn.mikrokopter.de/filedetails.php?repname=NaviCtrl&path=/tags/V0.20c/ubx.h |
*/ |
typedef struct { |
s32 Longitude; // in 1E-7 deg |
s32 Latitude; // in 1E-7 deg |
s32 Altitude; // in mm |
u8 Status; // validity of data |
} __attribute__((packed)) GPS_Pos_t; |
|
#define INVALID 0x00 |
#define NEWDATA 0x01 |
#define PROCESSED 0x02 |
|
/* |
* NaviCtrl OSD Structs |
* portions taken and adapted from |
* http://svn.mikrokopter.de/filedetails.php?repname=NaviCtrl&path=/tags/V0.24b/uart1.h |
*/ |
typedef struct { |
u16 Distance; // distance to target in dm |
s16 Bearing; // course to target in deg |
} __attribute__((packed)) GPS_PosDev_t; |
|
typedef struct { |
u8 Version; // version of the data structure |
GPS_Pos_t CurrentPosition; // see ubx.h for details |
GPS_Pos_t TargetPosition; |
GPS_PosDev_t TargetPositionDeviation; |
GPS_Pos_t HomePosition; |
GPS_PosDev_t HomePositionDeviation; |
u8 WaypointIndex; // index of current waypoints running from 0 to WaypointNumber-1 |
u8 WaypointNumber; // number of stored waypoints |
u8 SatsInUse; // number of satellites used for position solution |
s16 Altimeter; // hight according to air pressure |
s16 Variometer; // climb(+) and sink(-) rate |
u16 FlyingTime; // in seconds |
u8 UBat; // Battery Voltage in 0.1 Volts |
u16 GroundSpeed; // speed over ground in cm/s (2D) |
s16 Heading; // current flight direction in ° as angle to north |
s16 CompassHeading; // current compass value in ° |
s8 AngleNick; // current Nick angle in 1° |
s8 AngleRoll; // current Rick angle in 1° |
u8 RC_Quality; // RC_Quality |
u8 FCFlags; // Flags from FC |
u8 NCFlags; // Flags from NC |
u8 Errorcode; // 0 --> okay |
u8 OperatingRadius; // current operation radius around the Home Position in m |
s16 TopSpeed; // velocity in vertical direction in cm/s |
u8 TargetHoldTime; // time in s to stay at the given target, counts down to 0 if target has been reached |
u8 FCStatusFlags2; // StatusFlags2 (since version 5 added) |
s16 SetpointAltitude; // setpoint for altitude |
u8 Gas; // for future use |
u16 Current; // actual current in 0.1A steps |
u16 UsedCapacity; // used capacity in mAh |
} __attribute__((packed)) NaviData_t; |
|
#define NC_FLAG_FREE 0x01 |
#define NC_FLAG_PH 0x02 |
#define NC_FLAG_CH 0x04 |
#define NC_FLAG_RANGE_LIMIT 0x08 |
#define NC_FLAG_NOSERIALLINK 0x10 |
#define NC_FLAG_TARGET_REACHED 0x20 |
#define NC_FLAG_MANUAL_CONTROL 0x40 |
#define NC_FLAG_GPS_OK 0x80 |
|
/* |
* MikroKopter Flags |
* portions taken and adapted from |
* http://svn.mikrokopter.de/filedetails.php?repname=FlightCtrl&path=/tags/V0.80d/fc.h |
*/ |
#define FCFLAG_MOTOR_RUN 0x01 |
#define FCFLAG_FLY 0x02 |
#define FCFLAG_CALIBRATE 0x04 |
#define FCFLAG_START 0x08 |
#define FCFLAG_NOTLANDUNG 0x10 |
#define FCFLAG_LOWBAT 0x20 |
#define FCFLAG_VARIO_TRIM_UP 0x40 |
#define FCFLAG_VARIO_TRIM_DOWN 0x80 |
|
// FC STATUS FLAGS2 |
#define FC_STATUS2_CAREFREE 0x01 |
#define FC_STATUS2_ALTITUDE_CONTROL 0x02 |
|
#define DEFEKT_G_NICK 0x01 |
#define DEFEKT_G_ROLL 0x02 |
#define DEFEKT_G_GIER 0x04 |
#define DEFEKT_A_NICK 0x08 |
#define DEFEKT_A_ROLL 0x10 |
#define DEFEKT_A_Z 0x20 |
#define DEFEKT_PRESSURE 0x40 |
#define DEFEKT_CAREFREE_ERR 0x80 |
|
#define DEFEKT_I2C 0x01 |
#define DEFEKT_BL_MISSING 0x02 |
#define DEFEKT_SPI_RX_ERR 0x04 |
#define DEFEKT_PPM_ERR 0x08 |
#define DEFEKT_MIXER_ERR 0x10 |
|
/* |
* MikroKopter config struct |
* portions taken and adapted from |
* http://svn.mikrokopter.de/filedetails.php?repname=FlightCtrl&path=/tags/V0.80d/eeprom.h |
*/ |
typedef struct { |
unsigned char Revision; |
unsigned char Kanalbelegung[12]; // GAS[0], GIER[1],NICK[2], ROLL[3], POTI1, POTI2, POTI3 |
unsigned char GlobalConfig; // 0x01=Höhenregler aktiv,0x02=Kompass aktiv, 0x04=GPS aktiv, 0x08=Heading Hold aktiv |
unsigned char Hoehe_MinGas; // Wert : 0-100 |
unsigned char Luftdruck_D; // Wert : 0-250 |
unsigned char MaxHoehe; // Wert : 0-32 |
unsigned char Hoehe_P; // Wert : 0-32 |
unsigned char Hoehe_Verstaerkung; // Wert : 0-50 |
unsigned char Hoehe_ACC_Wirkung; // Wert : 0-250 |
unsigned char Hoehe_HoverBand; // Wert : 0-250 |
unsigned char Hoehe_GPS_Z; // Wert : 0-250 |
unsigned char Hoehe_StickNeutralPoint; // Wert : 0-250 |
unsigned char Stick_P; // Wert : 1-6 |
unsigned char Stick_D; // Wert : 0-64 |
unsigned char Gier_P; // Wert : 1-20 |
unsigned char Gas_Min; // Wert : 0-32 |
unsigned char Gas_Max; // Wert : 33-250 |
unsigned char GyroAccFaktor; // Wert : 1-64 |
unsigned char KompassWirkung; // Wert : 0-32 |
unsigned char Gyro_P; // Wert : 10-250 |
unsigned char Gyro_I; // Wert : 0-250 |
unsigned char Gyro_D; // Wert : 0-250 |
unsigned char Gyro_Gier_P; // Wert : 10-250 |
unsigned char Gyro_Gier_I; // Wert : 0-250 |
unsigned char Gyro_Stability; // Wert : 0-16 |
unsigned char UnterspannungsWarnung; // Wert : 0-250 |
unsigned char NotGas; // Wert : 0-250 //Gaswert bei Empängsverlust |
unsigned char NotGasZeit; // Wert : 0-250 // Zeitbis auf NotGas geschaltet wird, wg. Rx-Problemen |
unsigned char Receiver; // 0= Summensignal, 1= Spektrum, 2 =Jeti, 3=ACT DSL, 4=ACT S3D |
unsigned char I_Faktor; // Wert : 0-250 |
unsigned char UserParam1; // Wert : 0-250 |
unsigned char UserParam2; // Wert : 0-250 |
unsigned char UserParam3; // Wert : 0-250 |
unsigned char UserParam4; // Wert : 0-250 |
unsigned char ServoNickControl; // Wert : 0-250 // Stellung des Servos |
unsigned char ServoNickComp; // Wert : 0-250 // Einfluss Gyro/Servo |
unsigned char ServoNickMin; // Wert : 0-250 // Anschlag |
unsigned char ServoNickMax; // Wert : 0-250 // Anschlag |
//--- Seit V0.75 |
unsigned char ServoRollControl; // Wert : 0-250 // Stellung des Servos |
unsigned char ServoRollComp; // Wert : 0-250 |
unsigned char ServoRollMin; // Wert : 0-250 |
unsigned char ServoRollMax; // Wert : 0-250 |
//--- |
unsigned char ServoNickRefresh; // Speed of the Servo |
unsigned char ServoManualControlSpeed; // |
unsigned char CamOrientation; // |
unsigned char Servo3; // Value or mapping of the Servo Output |
unsigned char Servo4; // Value or mapping of the Servo Output |
unsigned char Servo5; // Value or mapping of the Servo Output |
unsigned char LoopGasLimit; // Wert: 0-250 max. Gas w�hrend Looping |
unsigned char LoopThreshold; // Wert: 0-250 Schwelle f�r Stickausschlag |
unsigned char LoopHysterese; // Wert: 0-250 Hysterese f�r Stickausschlag |
unsigned char AchsKopplung1; // Wert: 0-250 Faktor, mit dem Gier die Achsen Roll und Nick koppelt (NickRollMitkopplung) |
unsigned char AchsKopplung2; // Wert: 0-250 Faktor, mit dem Nick und Roll verkoppelt werden |
unsigned char CouplingYawCorrection; // Wert: 0-250 Faktor, mit dem Nick und Roll verkoppelt werden |
unsigned char WinkelUmschlagNick; // Wert: 0-250 180°-Punkt |
unsigned char WinkelUmschlagRoll; // Wert: 0-250 180°-Punkt |
unsigned char GyroAccAbgleich; // 1/k (Koppel_ACC_Wirkung) |
unsigned char Driftkomp; |
unsigned char DynamicStability; |
unsigned char UserParam5; // Wert : 0-250 |
unsigned char UserParam6; // Wert : 0-250 |
unsigned char UserParam7; // Wert : 0-250 |
unsigned char UserParam8; // Wert : 0-250 |
//---Output --------------------------------------------- |
unsigned char J16Bitmask; // for the J16 Output |
unsigned char J16Timing; // for the J16 Output |
unsigned char J17Bitmask; // for the J17 Output |
unsigned char J17Timing; // for the J17 Output |
// seit version V0.75c |
unsigned char WARN_J16_Bitmask; // for the J16 Output |
unsigned char WARN_J17_Bitmask; // for the J17 Output |
//---NaviCtrl--------------------------------------------- |
unsigned char NaviGpsModeControl; // Parameters for the Naviboard |
unsigned char NaviGpsGain; |
unsigned char NaviGpsP; |
unsigned char NaviGpsI; |
unsigned char NaviGpsD; |
unsigned char NaviGpsPLimit; |
unsigned char NaviGpsILimit; |
unsigned char NaviGpsDLimit; |
unsigned char NaviGpsACC; |
unsigned char NaviGpsMinSat; |
unsigned char NaviStickThreshold; |
unsigned char NaviWindCorrection; |
unsigned char NaviSpeedCompensation; |
unsigned char NaviOperatingRadius; |
unsigned char NaviAngleLimitation; |
unsigned char NaviPH_LoginTime; |
//---Ext.Ctrl--------------------------------------------- |
unsigned char ExternalControl; // for serial Control |
//---CareFree--------------------------------------------- |
unsigned char OrientationAngle; // Where is the front-direction? |
unsigned char OrientationModeControl; // switch for CareFree |
unsigned char MotorSafetySwitch; |
//------------------------------------------------ |
unsigned char BitConfig; // (war Loop-Cfg) Bitcodiert: 0x01=oben, 0x02=unten, 0x04=links, 0x08=rechts / wird getrennt behandelt |
unsigned char ServoCompInvert; // // 0x01 = Nick, 0x02 = Roll 0 oder 1 // WICHTIG!!! am Ende lassen |
unsigned char ExtraConfig; // bitcodiert |
char Name[12]; |
unsigned char crc; // must be the last byte! |
} __attribute__((packed)) paramset_t; |
|
typedef struct { |
u8 SettingsIndex; |
paramset_t param; |
} __attribute__((packed)) paramset_serial; |
|
#endif |