WebSVN - Projects - Blame - Rev 162 - /QMK-Groundstation/trunk/Forms/mktool.cpp

Rev	Author	Line No.	Line
158	KeyOz	1	/***************************************************************************
		2	* Copyright (C) 2008 by Manuel Schrape *
		3	* manuel.schrape@gmx.de *
		4	* *
		5	* This program is free software; you can redistribute it and/or modify *
		6	* it under the terms of the GNU General Public License as published by *
		7	* the Free Software Foundation; either version 2 of the License. *
		8	* *
		9	* This program is distributed in the hope that it will be useful, *
		10	* but WITHOUT ANY WARRANTY; without even the implied warranty of *
		11	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
		12	* GNU General Public License for more details. *
		13	* *
		14	* You should have received a copy of the GNU General Public License *
		15	* along with this program; if not, write to the *
		16	* Free Software Foundation, Inc., *
		17	* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
		18	***************************************************************************/
		19
		20	#include <QtGui>
		21
		22	#include <QLineEdit>
		23	#include <QString>
		24	#include <QTimer>
		25	#include <QIcon>
		26	#include <QToolButton>
		27	#include <QSpinBox>
		28
		29	#include "mktool.h"
		30	#include "dlg_Config.h"
		31	#include "dlg_Motortest.h"
159	KeyOz	32	#include "dlg_Preferences.h"
158	KeyOz	33	#include "../global.h"
		34	#include "../ToolBox.h"
		35
		36	#include <stdlib.h>
		37
		38	MKTool::MKTool()
		39	{
		40	setupUi(this);
		41
		42	Settings = new cSettings;
162	KeyOz	43	// Settings->read_Settings();
		44	// Settings->read_Settings_FC();
158	KeyOz	45
		46	init_Arrays();
		47	init_Icons();
		48	init_GUI();
		49
		50	init_Objects();
		51	init_Connections();
		52
		53	init_Plot();
		54
159	KeyOz	55	Ticker->start(2000);
158	KeyOz	56	}
		57
		58	void MKTool::init_GUI()
		59	{
		60	setWindowTitle(QA_NAME + " v" + QA_VERSION);
		61
		62	#ifdef _EEEPC_
		63	toolBar->hide();
		64	#endif
		65
		66	resize(Settings->GUI.Size);
		67	move(Settings->GUI.Point);
		68
		69	if (Settings->GUI.isMax)
		70	{
		71	showMaximized();
		72	}
		73
		74	for (int a = 0; a < MaxAnalog; a++)
		75	{
162	KeyOz	76	lb_Analog[a]->setText(Settings->Analog1.Label[a]);
158	KeyOz	77	}
		78
		79	for (int b = 0; b < 6; b++)
		80	{
		81	TabWidgets[b] = tab_Main->widget(b);
		82	}
		83
		84	for (int c = 0; c < 6; c++)
		85	{
		86	if (Settings->GUI.TabViews[c] == false)
		87	{
		88	QString TabName = QString("Tab_%1").arg(c);
		89
		90	for (int d = 0; d < tab_Main->count(); d++)
		91	{
		92	if (tab_Main->widget(d)->objectName() == TabName)
		93	{
		94	tab_Main->removeTab(d);
		95	}
		96	}
		97	}
		98	}
		99
		100	ac_View0->setChecked(Settings->GUI.TabViews[0]);
		101	ac_View1->setChecked(Settings->GUI.TabViews[1]);
		102	ac_View2->setChecked(Settings->GUI.TabViews[2]);
		103	ac_View3->setChecked(Settings->GUI.TabViews[3]);
		104	ac_View4->setChecked(Settings->GUI.TabViews[4]);
		105	ac_View5->setChecked(Settings->GUI.TabViews[5]);
		106
		107	le_Port->setText(Settings->TTY.Port);
162	KeyOz	108
		109	cb_ShowMSG->setChecked(Settings->GUI.Term_Info);
		110	cb_ShowData->setChecked(Settings->GUI.Term_Data);
		111	cb_ShowAlways->setChecked(Settings->GUI.Term_Always);
158	KeyOz	112	}
		113
		114	void MKTool::init_Objects()
		115	{
		116	// QTimer-Instanzen
		117	Ticker = new QTimer(this);
		118
		119	// Seriell-Port
		120	serialPort = new ManageSerialPort;
		121
		122	// QFile-Instanz (Log-Datei)
		123	CSVFile = new QFile("");
159	KeyOz	124
		125	AllowSend = true;
158	KeyOz	126	}
		127
		128	void MKTool::init_Connections()
		129	{
		130	// Seriel-Port Empfang
		131	connect(serialPort, SIGNAL(newDataReceived(const QByteArray &)), this, SLOT(slot_newDataReceived(const QByteArray &)));
		132
		133	// Buttons und Menüpunkte / Toolbar
		134	connect(pb_Load, SIGNAL(clicked()), this, SLOT(slot_LoadParameter()));
		135	connect(pb_Save, SIGNAL(clicked()), this, SLOT(slot_SaveParameter()));
		136	connect(pb_Read, SIGNAL(clicked()), this, SLOT(slot_GetParameter()));
		137	connect(pb_Write, SIGNAL(clicked()), this, SLOT(slot_SetParameter()));
		138
159	KeyOz	139	connect(pb_LCDup, SIGNAL(clicked()), this, SLOT(slot_LCD_UP()));
		140	connect(pb_LCDdown, SIGNAL(clicked()), this, SLOT(slot_LCD_DOWN()));
		141
158	KeyOz	142	// Actions
		143	connect(ac_Config, SIGNAL(triggered()), this, SLOT(slot_ac_Config()));
159	KeyOz	144	connect(ac_Preferences, SIGNAL(triggered()), this, SLOT(slot_ac_Preferences()));
		145
158	KeyOz	146	connect(ac_Motortest, SIGNAL(triggered()), this, SLOT(slot_ac_Motortest()));
		147	connect(ac_StartPlotter, SIGNAL(triggered()), this, SLOT(slot_ac_StartPlotter()));
		148	connect(ac_MehrDaten, SIGNAL(triggered()), this, SLOT(slot_ac_MehrDaten()));
		149	connect(ac_About, SIGNAL(triggered()), this, SLOT(slot_ac_About()));
		150	connect(ac_GetLabels, SIGNAL(triggered()), this, SLOT(slot_ac_GetLabels()));
		151
		152	// Tabs ein & ausblenden
		153	connect(ac_View0, SIGNAL(triggered()), this, SLOT(slot_ac_View()));
		154	connect(ac_View1, SIGNAL(triggered()), this, SLOT(slot_ac_View()));
		155	connect(ac_View2, SIGNAL(triggered()), this, SLOT(slot_ac_View()));
		156	connect(ac_View3, SIGNAL(triggered()), this, SLOT(slot_ac_View()));
		157	connect(ac_View4, SIGNAL(triggered()), this, SLOT(slot_ac_View()));
		158	connect(ac_View5, SIGNAL(triggered()), this, SLOT(slot_ac_View()));
		159
162	KeyOz	160	// connect(pb_Update, SIGNAL(clicked()), this, SLOT(slot_pb_Update()));
158	KeyOz	161
		162	connect(ac_ConnectTTY, SIGNAL(triggered()), this, SLOT(slot_OpenPort()));
		163	connect(ac_RecordCSV, SIGNAL(triggered()), this, SLOT(slot_RecordCSV()));
		164
		165	connect(ac_LogDir, SIGNAL(triggered()), this, SLOT(slot_SetLogDir()));
		166	connect(ac_ParameterDir, SIGNAL(triggered()), this, SLOT(slot_SetParDir()));
		167
		168	// Timer-Events
		169	connect(Ticker, SIGNAL(timeout()), SLOT(slot_Ticker()));
		170
		171	// Seitenwechsel :)
		172	connect(tab_Main, SIGNAL(currentChanged(int)), this, SLOT(slot_TabChanged(int)));
		173	connect(tab_Par, SIGNAL(currentChanged(int)), this, SLOT(slot_TabChanged(int)));
		174
		175	// Parameterevents
		176	connect(tb_9_6, SIGNAL(clicked()), this, SLOT(slot_tbUp()));
		177	connect(tb_9_7, SIGNAL(clicked()), this, SLOT(slot_tbDown()));
		178	connect(tb_9_8, SIGNAL(clicked()), this, SLOT(slot_tbLeft()));
		179	connect(tb_9_9, SIGNAL(clicked()), this, SLOT(slot_tbRight()));
		180
		181	connect(J16_0, SIGNAL(clicked()), this, SLOT(slot_LEDtoValue()));
		182	connect(J16_1, SIGNAL(clicked()), this, SLOT(slot_LEDtoValue()));
		183	connect(J16_2, SIGNAL(clicked()), this, SLOT(slot_LEDtoValue()));
		184	connect(J16_3, SIGNAL(clicked()), this, SLOT(slot_LEDtoValue()));
		185	connect(J16_4, SIGNAL(clicked()), this, SLOT(slot_LEDtoValue()));
		186	connect(J16_5, SIGNAL(clicked()), this, SLOT(slot_LEDtoValue()));
		187	connect(J16_6, SIGNAL(clicked()), this, SLOT(slot_LEDtoValue()));
		188	connect(J16_7, SIGNAL(clicked()), this, SLOT(slot_LEDtoValue()));
		189
		190	connect(J17_0, SIGNAL(clicked()), this, SLOT(slot_LEDtoValue()));
		191	connect(J17_1, SIGNAL(clicked()), this, SLOT(slot_LEDtoValue()));
		192	connect(J17_2, SIGNAL(clicked()), this, SLOT(slot_LEDtoValue()));
		193	connect(J17_3, SIGNAL(clicked()), this, SLOT(slot_LEDtoValue()));
		194	connect(J17_4, SIGNAL(clicked()), this, SLOT(slot_LEDtoValue()));
		195	connect(J17_5, SIGNAL(clicked()), this, SLOT(slot_LEDtoValue()));
		196	connect(J17_6, SIGNAL(clicked()), this, SLOT(slot_LEDtoValue()));
		197	connect(J17_7, SIGNAL(clicked()), this, SLOT(slot_LEDtoValue()));
		198
		199	connect(sb_11_1, SIGNAL(valueChanged(int)), this, SLOT(slot_ValuetoLED16(int)));
		200	connect(sb_11_3, SIGNAL(valueChanged(int)), this, SLOT(slot_ValuetoLED17(int)));
		201
		202	// Plotter
		203	connect(scroll_plot, SIGNAL(valueChanged(int)), this, SLOT(slot_ScrollPlot(int)));
		204
		205	// About-QT Dialog einfügen
		206	menu_Help->addAction(trUtf8("Über &Qt"), qApp, SLOT(aboutQt()));
		207	}
		208
		209	void MKTool::init_Arrays()
		210	{
		211	lb_Analog[0] = lb_A_0;
		212	lb_Analog[1] = lb_A_1;
		213	lb_Analog[2] = lb_A_2;
		214	lb_Analog[3] = lb_A_3;
		215	lb_Analog[4] = lb_A_4;
		216	lb_Analog[5] = lb_A_5;
		217	lb_Analog[6] = lb_A_6;
		218	lb_Analog[7] = lb_A_7;
		219	lb_Analog[8] = lb_A_8;
		220	lb_Analog[9] = lb_A_9;
		221	lb_Analog[10] = lb_A_10;
		222	lb_Analog[11] = lb_A_11;
		223	lb_Analog[12] = lb_A_12;
		224	lb_Analog[13] = lb_A_13;
		225	lb_Analog[14] = lb_A_14;
		226	lb_Analog[15] = lb_A_15;
		227	lb_Analog[16] = lb_A_16;
		228	lb_Analog[17] = lb_A_17;
		229	lb_Analog[18] = lb_A_18;
		230	lb_Analog[19] = lb_A_19;
		231	lb_Analog[20] = lb_A_20;
		232	lb_Analog[21] = lb_A_21;
		233	lb_Analog[22] = lb_A_22;
		234	lb_Analog[23] = lb_A_23;
		235	lb_Analog[24] = lb_A_24;
		236	lb_Analog[25] = lb_A_25;
		237	lb_Analog[26] = lb_A_26;
		238	lb_Analog[27] = lb_A_27;
		239	lb_Analog[28] = lb_A_28;
		240	lb_Analog[29] = lb_A_29;
		241	lb_Analog[30] = lb_A_30;
		242	lb_Analog[31] = lb_A_31;
		243	}
		244
		245	void MKTool::init_Plot()
		246	{
		247	NextPlot = 0;
		248
		249	qwtPlot->setCanvasBackground(QColor(QRgb(0x00000000)));
		250
		251	qwtPlot->insertLegend(new QwtLegend(), QwtPlot::RightLegend);
		252
		253	QwtPlotGrid *Grid = new QwtPlotGrid();
		254	Grid->setMajPen(QPen(Qt::gray, 0, Qt::DotLine));
		255
		256
		257	Grid->attach(qwtPlot);
		258
		259	qwtPlot->setAxisScale(QwtPlot::xBottom,0,PlotWide,0);
		260
		261	for (int a = 0; a < MaxAnalog; a++)
		262	{
162	KeyOz	263	Plot[a] = new QwtPlotCurve(Settings->Analog1.Label[a]);
		264	Plot[a]->setPen(QPen(QColor(Def_Colors[a])));
158	KeyOz	265	// Plot[a]->setRenderHint(QwtPlotItem::RenderAntialiased);
		266
162	KeyOz	267	if (Settings->Analog1.PlotView[a])
158	KeyOz	268	Plot[a]->attach(qwtPlot);
		269	}
		270	qwtPlot->replot();
		271	}
		272
		273	void MKTool::init_Icons()
		274	{
		275	Icons[0].addPixmap(QPixmap(QString::fromUtf8(":/LED/Images/16X16/ledred.png")), QIcon::Normal, QIcon::Off);
		276	Icons[1].addPixmap(QPixmap(QString::fromUtf8(":/LED/Images/16X16/ledyellow.png")), QIcon::Normal, QIcon::Off);
		277	Icons[3].addPixmap(QPixmap(QString::fromUtf8(":/LED/Images/16X16/ledyellow.png")), QIcon::Normal, QIcon::Off);
		278	Icons[4].addPixmap(QPixmap(QString::fromUtf8(":/LED/Images/16X16/ledoff.png")), QIcon::Normal, QIcon::Off);
		279
		280	Icons[5].addPixmap(QPixmap(QString::fromUtf8(":/Actions/Images/22X22/application-exit.png")), QIcon::Normal, QIcon::Off);
		281	Icons[6].addPixmap(QPixmap(QString::fromUtf8(":/Actions/Images/22X22/media-playback-stop.png")), QIcon::Normal, QIcon::Off);
		282	Icons[7].addPixmap(QPixmap(QString::fromUtf8(":/Actions/Images/22X22/media-record.png")), QIcon::Normal, QIcon::Off);
		283	Icons[8].addPixmap(QPixmap(QString::fromUtf8(":/Actions/Images/22X22/network-connect.png")), QIcon::Normal, QIcon::Off);
		284	Icons[9].addPixmap(QPixmap(QString::fromUtf8(":/Actions/Images/22X22/network-disconnect.png")), QIcon::Normal, QIcon::Off);
		285	Icons[10].addPixmap(QPixmap(QString::fromUtf8(":/Actions/Images/22X22/utilities-system-monitor.png")), QIcon::Normal, QIcon::Off);
		286
		287	Icons[20].addPixmap(QPixmap(QString::fromUtf8(":/Arrows/Images/32X32/arrow-up-double.png")), QIcon::Normal, QIcon::Off);
		288	Icons[21].addPixmap(QPixmap(QString::fromUtf8(":/Arrows/Images/32X32/arrow-up.png")), QIcon::Normal, QIcon::Off);
		289	Icons[22].addPixmap(QPixmap(QString::fromUtf8(":/Arrows/Images/32X32/arrow-down-double.png")), QIcon::Normal, QIcon::Off);
		290	Icons[23].addPixmap(QPixmap(QString::fromUtf8(":/Arrows/Images/32X32/arrow-down.png")), QIcon::Normal, QIcon::Off);
		291	Icons[24].addPixmap(QPixmap(QString::fromUtf8(":/Arrows/Images/32X32/arrow-left-double.png")), QIcon::Normal, QIcon::Off);
		292	Icons[25].addPixmap(QPixmap(QString::fromUtf8(":/Arrows/Images/32X32/arrow-left.png")), QIcon::Normal, QIcon::Off);
		293	Icons[26].addPixmap(QPixmap(QString::fromUtf8(":/Arrows/Images/32X32/arrow-right-double.png")), QIcon::Normal, QIcon::Off);
		294	Icons[27].addPixmap(QPixmap(QString::fromUtf8(":/Arrows/Images/32X32/arrow-right.png")), QIcon::Normal, QIcon::Off);
		295	}
		296
		297
		298	// Ticker-Event
		299	///////////////
		300	void MKTool::slot_Ticker()
		301	{
		302	if (TickerDiv)
		303	TickerDiv = false;
		304	else
		305	TickerDiv = true;
		306
		307	for (int a = 0; a < MaxTickerEvents; a++)
		308	{
		309	if (TickerEvent[a] == true)
		310	{
		311	switch(a)
		312	{
		313	case 0 :
		314	if (TickerDiv)
		315	{
		316	QByteArray Temp(LastSend.toUtf8());
		317	serialPort->sendData(Temp);
		318	}
		319	break;
		320	case 1 :
159	KeyOz	321	TX_Data[0] = 0;
		322	send_Data('p', ADDRESS_FC, TX_Data, 0, false);
158	KeyOz	323	break;
159	KeyOz	324	case 2 :
		325	TX_Data[0] = LCD_Page;
		326	TX_Data[1] = 0;
		327	send_Data('l', ADDRESS_ALL, TX_Data, 1, true);
		328	break;
158	KeyOz	329	}
		330	}
		331	}
		332	}
		333
		334
		335	// Slots der Actions (Menüpunkte, Buttons)
		336	//////////////////////////////////////////
		337	void MKTool::slot_ac_Motortest()
		338	{
		339	dlg_Motortest *f_Motortest = new dlg_Motortest(this);
		340
		341	connect(f_Motortest, SIGNAL(updateMotor(int, int, int, int)), this, SLOT(slot_Motortest(int, int, int, int)));
		342
		343	if (f_Motortest->exec()==QDialog::Accepted)
		344	{
		345	}
		346
		347	disconnect(f_Motortest, 0,0,0);
		348	slot_Motortest(0,0,0,0);
		349	}
		350
		351	void MKTool::slot_Motortest(int Motor1, int Motor2, int Motor3, int Motor4)
		352	{
		353	TX_Data[0] = Motor1;
		354	TX_Data[1] = Motor2;
		355	TX_Data[2] = Motor3;
		356	TX_Data[3] = Motor4;
159	KeyOz	357	send_Data('t', ADDRESS_FC, TX_Data, 4, false);
158	KeyOz	358	}
		359
		360	void MKTool::slot_ac_Config()
		361	{
162	KeyOz	362	set_Analog Old_Analog1;
158	KeyOz	363
162	KeyOz	364	Old_Analog1 = Settings->Analog1;
		365
158	KeyOz	366	dlg_Config *f_Config = new dlg_Config(this);
162	KeyOz	367	f_Config->set_Settings(Settings, Mode.ID);
158	KeyOz	368
		369	if (f_Config->exec()==QDialog::Accepted)
		370	{
		371	Settings = f_Config->get_Settings();
162	KeyOz	372	Settings->write_Settings_Analog(Mode.ID);
158	KeyOz	373
		374	for (int a = 0; a < MaxAnalog; a++)
		375	{
162	KeyOz	376	if (Old_Analog1.PlotView[a] == Settings->Analog1.PlotView[a])
158	KeyOz	377	continue;
		378	else
		379	{
		380	config_Plot();
		381	break;
		382	}
		383	}
		384
		385	if (CSVFile->isOpen())
		386	{
		387	for (int a = 0; a < MaxAnalog; a++)
		388	{
162	KeyOz	389	if (Old_Analog1.LogView[a] == Settings->Analog1.LogView[a])
158	KeyOz	390	continue;
		391	else
		392	{
		393	slot_RecordCSV();
		394	slot_RecordCSV();
		395	break;
		396	}
		397	}
		398	}
		399
		400	}
		401	}
		402
159	KeyOz	403	void MKTool::slot_ac_Preferences()
		404	{
		405	dlg_Preferences *f_Preferences = new dlg_Preferences(this);
		406
		407	if (f_Preferences->exec()==QDialog::Accepted)
		408	{
		409
		410	}
		411	}
		412
158	KeyOz	413	void MKTool::slot_ac_StartPlotter()
		414	{
		415	if (ac_StartPlotter->isChecked())
		416	{
		417	ac_StartPlotter->setText("Stop Plotter");
		418	pb_StartPlotter->setText("Stop Plotter");
		419	}
		420	else
		421	{
		422	ac_StartPlotter->setText("Start Plotter");
		423	pb_StartPlotter->setText("Start Plotter");
		424	}
		425	}
		426
		427	void MKTool::slot_ac_View()
		428	{
		429	int Aktive;
		430
		431	QAction Action = (QAction)sender();
		432
		433	if (Action->objectName() == QString("ac_View0"))
		434	Aktive = 0;
		435	if (Action->objectName() == QString("ac_View1"))
		436	Aktive = 1;
		437	if (Action->objectName() == QString("ac_View2"))
		438	Aktive = 2;
		439	if (Action->objectName() == QString("ac_View3"))
		440	Aktive = 3;
		441	if (Action->objectName() == QString("ac_View4"))
		442	Aktive = 4;
		443	if (Action->objectName() == QString("ac_View5"))
		444	Aktive = 5;
		445
		446	QString TabName = QString("Tab_%1").arg(Aktive);
		447
		448	if (!Action->isChecked())
		449	{
		450	for (int a = 0; a < tab_Main->count(); a++)
		451	{
		452	if (tab_Main->widget(a)->objectName() == TabName)
		453	{
		454	tab_Main->removeTab(a);
		455	}
		456	}
		457
		458	// Action->setChecked(false);
		459	}
		460	else
		461	{
		462	// Action->setChecked(true);
		463	tab_Main->insertTab(Aktive, TabWidgets[Aktive], Action->text());
		464	}
		465	}
		466
159	KeyOz	467	void MKTool::slot_ac_MehrDaten() // DONE 0.71g
158	KeyOz	468	{
		469	if (ac_MehrDaten->isChecked())
		470	{
159	KeyOz	471	TX_Data[0] = 10;
		472	send_Data('d', ADDRESS_ALL, TX_Data, 1, false); }
158	KeyOz	473	else
		474	{
159	KeyOz	475	TX_Data[0] = 50;
		476	send_Data('d', ADDRESS_ALL, TX_Data, 1, false); }
158	KeyOz	477	}
		478
		479	void MKTool::slot_ac_About()
		480	{
		481	QMessageBox::about(this, trUtf8(("Über ")) + QA_NAME, QA_ABOUT);
		482	}
		483
159	KeyOz	484	void MKTool::slot_ac_GetLabels() // DONE 0.71g
158	KeyOz	485	{
		486	TX_Data[0] = 0;
159	KeyOz	487	send_Data('a', ADDRESS_ALL, TX_Data, 1, false);
158	KeyOz	488	}
		489
159	KeyOz	490
158	KeyOz	491	// Daten-Plotter
		492	/////////////////
		493	void MKTool::update_Plot()
		494	{
		495	for (int a = 0; a < MaxAnalog; a++)
		496	{
		497	Plot[a]->setData(aID,aData[a],NextPlot - 1);
		498	}
		499
		500	if ((NextPlot > PlotWide))
		501	{
		502	scroll_plot->setMaximum(NextPlot - PlotWide);
		503	}
		504
		505	if ((scroll_plot->value() == NextPlot - (PlotWide + 1)))
		506	{
		507	qwtPlot->setAxisScale(QwtPlot::xBottom,NextPlot - PlotWide,NextPlot,0);
		508	scroll_plot->setValue(NextPlot - PlotWide);
		509	}
		510
		511	qwtPlot->replot();
		512	}
		513
		514	void MKTool::config_Plot()
		515	{
		516	for (int a = 0; a < MaxAnalog; a++)
		517	{
		518	Plot[a]->detach();
162	KeyOz	519	Plot[a]->setPen(QPen(QColor(Def_Colors[a])));
158	KeyOz	520
162	KeyOz	521	if (Settings->Analog1.PlotView[a])
		522	{
		523	Plot[a]->setTitle(Settings->Analog1.Label[a]);
158	KeyOz	524	Plot[a]->attach(qwtPlot);
162	KeyOz	525	}
158	KeyOz	526	}
		527	}
		528
		529	void MKTool::slot_ScrollPlot(int Pos)
		530	{
		531	qwtPlot->setAxisScale(QwtPlot::xBottom,Pos,Pos + PlotWide,0);
		532	qwtPlot->replot();
		533	}
		534
		535
		536	// Firmeware-Update
		537	///////////////////
		538	void MKTool::slot_pb_Update()
		539	{
162	KeyOz	540	qDebug("Update");
158	KeyOz	541
162	KeyOz	542	if (serialPort->isOpen())
		543	{
		544	slot_OpenPort();
		545	}
		546
		547	Update = new QProcess();
		548
		549	const QString Programm = "avrdude -p m644 -P /dev/ttyS0 -c butterfly -b 57600 -U flash:w:Flight-Ctrl_MEGA644_V0_71f.hex";
		550	const QStringList Argumente = (QStringList() << "-?");
		551
		552	te_Shell->setText(""); // Ausgabefenster säubern
		553	Update->start(Programm); // Programmaufruf
		554	// Update.waitForFinished(); // auf Rückmeldung warten
		555	// Update.close(); // Kanal schließen
		556	connect(Update, SIGNAL(readyReadStandardOutput()), this, SLOT(slot_UpdateShell()) );
158	KeyOz	557	}
		558
		559	void MKTool::slot_UpdateShell()
		560	{
162	KeyOz	561	QByteArray Output;
158	KeyOz	562	// te_Shell->setText(""); // Ausgabefenster säubern
162	KeyOz	563	Output = Update->readAllStandardOutput(); // Shellausgabe an Variable
158	KeyOz	564
162	KeyOz	565	te_Shell->moveCursor(QTextCursor::End, QTextCursor::MoveAnchor);
		566	te_Shell->insertPlainText(QString::fromUtf8(Output));
158	KeyOz	567
162	KeyOz	568	te_Shell->setText(QString::fromUtf8(Output)); // ...und endlich: Ausgabe im QLabel
		569	qDebug("Shell");
158	KeyOz	570	}
		571
		572	// Configuration -> Verzeichnisse
		573	/////////////////////////////////
		574	void MKTool::slot_SetLogDir()
		575	{
		576	QString directory = QFileDialog::getExistingDirectory(this, "Verzeichniss für CSV-Logdateien", Settings->DIR.Logging, QFileDialog::DontResolveSymlinks \| QFileDialog::ShowDirsOnly);
		577
		578	if ((!directory.isEmpty()) && (Settings->DIR.Logging != directory))
		579	{
		580	Settings->DIR.Logging = directory;
		581	Settings->write_Settings();
		582	}
		583	}
		584
		585	void MKTool::slot_SetParDir()
		586	{
		587	QString directory = QFileDialog::getExistingDirectory(this, "Verzeichniss für Parameter-Dateien", Settings->DIR.Parameter, QFileDialog::DontResolveSymlinks \| QFileDialog::ShowDirsOnly);
		588
		589	if ((!directory.isEmpty()) && (Settings->DIR.Parameter != directory))
		590	{
		591	Settings->DIR.Parameter = directory;
		592	Settings->write_Settings();
		593	}
		594
		595	}
		596
		597
		598	// Settings-Bereich
		599	///////////////////
		600
		601	void MKTool::slot_LEDtoValue()
		602	{
		603	QToolButton ToolButton = (QToolButton)sender();
		604	if (ToolButton->text() == QString("0"))
		605	{
		606	set_LED(ToolButton, true);
		607	sb_11_1->setValue(sb_11_1->value() + ToolButton->toolTip().toInt());
		608	}
		609	else if (ToolButton->text() == QString("1"))
		610	{
		611	set_LED(ToolButton);
		612	sb_11_1->setValue(sb_11_1->value() - ToolButton->toolTip().toInt());
		613	}
		614	else if (ToolButton->text() == QString("00"))
		615	{
		616	set_LED(ToolButton, true);
		617	sb_11_3->setValue(sb_11_3->value() + ToolButton->toolTip().toInt());
		618	}
		619	else if (ToolButton->text() == QString("11"))
		620	{
		621	set_LED(ToolButton);
		622	sb_11_3->setValue(sb_11_3->value() - ToolButton->toolTip().toInt());
		623	}
		624	}
		625
		626	void MKTool::slot_ValuetoLED16(int Wert)
		627	{
		628	// QSpinBox SpinBox = (QSpinBox)sender();
		629
		630	// int Wert = SpinBox->value();
		631
		632	set_LED(J16_0);
		633	set_LED(J16_1);
		634	set_LED(J16_2);
		635	set_LED(J16_3);
		636	set_LED(J16_4);
		637	set_LED(J16_5);
		638	set_LED(J16_6);
		639	set_LED(J16_7);
		640
		641	for (int a = 0; a < 8; a++)
		642	{
		643	if (Wert > 127)
		644	{
		645	set_LED(J16_0, true);
		646	Wert = Wert - 128;
		647	}
		648	if (Wert > 63)
		649	{
		650	set_LED(J16_1, true);
		651	Wert = Wert - 64;
		652	}
		653	if (Wert > 31)
		654	{
		655	set_LED(J16_2, true);
		656	Wert = Wert - 32;
		657	}
		658	if (Wert > 15)
		659	{
		660	set_LED(J16_3, true);
		661	Wert = Wert - 16;
		662	}
		663	if (Wert > 7)
		664	{
		665	set_LED(J16_4, true);
		666	Wert = Wert - 8;
		667	}
		668	if (Wert > 3)
		669	{
		670	set_LED(J16_5, true);
		671	Wert = Wert - 4;
		672	}
		673	if (Wert > 1)
		674	{
		675	set_LED(J16_6, true);
		676	Wert = Wert - 2;
		677	}
		678	if (Wert > 0)
		679	{
		680	set_LED(J16_7, true);
		681	Wert = Wert - 1;
		682	}
		683	}
		684	}
		685
		686	void MKTool::slot_ValuetoLED17(int Wert)
		687	{
		688	// QSpinBox SpinBox = (QSpinBox)sender();
		689
		690	// int Wert = SpinBox->value();
		691
		692	set_LED(J17_0);
		693	set_LED(J17_1);
		694	set_LED(J17_2);
		695	set_LED(J17_3);
		696	set_LED(J17_4);
		697	set_LED(J17_5);
		698	set_LED(J17_6);
		699	set_LED(J17_7);
		700
		701	for (int a = 0; a < 8; a++)
		702	{
		703	if (Wert > 127)
		704	{
		705	set_LED(J17_0, true);
		706	Wert = Wert - 128;
		707	}
		708	if (Wert > 63)
		709	{
		710	set_LED(J17_1, true);
		711	Wert = Wert - 64;
		712	}
		713	if (Wert > 31)
		714	{
		715	set_LED(J17_2, true);
		716	Wert = Wert - 32;
		717	}
		718	if (Wert > 15)
		719	{
		720	set_LED(J17_3, true);
		721	Wert = Wert - 16;
		722	}
		723	if (Wert > 7)
		724	{
		725	set_LED(J17_4, true);
		726	Wert = Wert - 8;
		727	}
		728	if (Wert > 3)
		729	{
		730	set_LED(J17_5, true);
		731	Wert = Wert - 4;
		732	}
		733	if (Wert > 1)
		734	{
		735	set_LED(J17_6, true);
		736	Wert = Wert - 2;
		737	}
		738	if (Wert > 0)
		739	{
		740	set_LED(J17_7, true);
		741	Wert = Wert - 1;
		742	}
		743	}
		744	}
		745
		746	void MKTool::set_LED(QToolButton *ToolButton, bool On)
		747	{
		748	if (ToolButton->text() == QString("0") && On)
		749	{
		750	ToolButton->setIcon(Icons[0]);
		751	ToolButton->setText("1");
		752	}
		753	else if (ToolButton->text() == QString("1") && !On)
		754	{
		755	ToolButton->setIcon(Icons[4]);
		756	ToolButton->setText("0");
		757	}
		758	else if (ToolButton->text() == QString("00") && On)
		759	{
		760	ToolButton->setIcon(Icons[0]);
		761	ToolButton->setText("11");
		762	}
		763	else if (ToolButton->text() == QString("11") && !On)
		764	{
		765	ToolButton->setIcon(Icons[4]);
		766	ToolButton->setText("00");
		767	}
		768	}
		769
		770	void MKTool::slot_tbUp()
		771	{
		772	if (tb_9_6->text() == QString("0"))
		773	{
		774	tb_9_6->setIcon(Icons[20]);
		775	tb_9_6->setText("1");
		776	}
		777	else
		778	{
		779	tb_9_6->setIcon(Icons[21]);
		780	tb_9_6->setText("0");
		781	}
		782	}
		783
		784	void MKTool::slot_tbDown()
		785	{
		786	if (tb_9_7->text() == QString("0"))
		787	{
		788	tb_9_7->setIcon(Icons[22]);
		789	tb_9_7->setText("1");
		790	}
		791	else
		792	{
		793	tb_9_7->setIcon(Icons[23]);
		794	tb_9_7->setText("0");
		795	}
		796	}
		797
		798	void MKTool::slot_tbLeft()
		799	{
		800	if (tb_9_8->text() == QString("0"))
		801	{
		802	tb_9_8->setIcon(Icons[24]);
		803	tb_9_8->setText("1");
		804	}
		805	else
		806	{
		807	tb_9_8->setIcon(Icons[25]);
		808	tb_9_8->setText("0");
		809	}
		810	}
		811
		812	void MKTool::slot_tbRight()
		813	{
		814	if (tb_9_9->text() == QString("0"))
		815	{
		816	tb_9_9->setIcon(Icons[26]);
		817	tb_9_9->setText("1");
		818	}
		819	else
		820	{
		821	tb_9_9->setIcon(Icons[27]);
		822	tb_9_9->setText("0");
		823	}
		824	}
		825
		826	QComboBox MKTool::setCombo(QComboBox Combo, int Set, int Wert)
		827	{
		828	if (ParameterSet[Set][Wert] <= 250)
		829	{
		830	Combo->setItemText(4, QString("%1").arg(ParameterSet[Set][Wert]));
		831	Combo->setCurrentIndex(4);
		832	}
		833	else
		834	{
		835	Combo->setCurrentIndex(ParameterSet[Set][Wert] - 251);
		836	}
		837	return Combo;
		838	}
		839
		840	int MKTool::get_Value(QComboBox *Combo)
		841	{
		842	if (Combo->currentText() == QString("Poti 1"))
		843	return 251;
		844	if (Combo->currentText() == QString("Poti 2"))
		845	return 252;
		846	if (Combo->currentText() == QString("Poti 3"))
		847	return 253;
		848	if (Combo->currentText() == QString("Poti 4"))
		849	return 254;
		850	return Combo->currentText().toInt();
		851	}
		852
159	KeyOz	853	void MKTool::store_ParameterSet(int Set) // DONE 0.71g
158	KeyOz	854	{
		855	char *Name = le_SetName->text().toLatin1().data();
		856
		857	int a;
		858
		859	for (a = 0; a < le_SetName->text().length(); a++)
		860	{
		861	ParameterSet[Set][P_NAME+a] = Name[a];
		862	}
		863
		864	while(a < 12)
		865	{
		866	ParameterSet[Set][P_NAME+a] = 0;
		867	a++;
		868	}
		869
		870	// Seite 1
		871	ParameterSet[Set][P_GLOBAL_CONF] = 0;
		872
		873	if (cb_1_1->isChecked())
		874	ParameterSet[Set][P_GLOBAL_CONF] = ParameterSet[Set][P_GLOBAL_CONF] \| 0x01;
		875	if (cb_1_2->isChecked())
		876	ParameterSet[Set][P_GLOBAL_CONF] = ParameterSet[Set][P_GLOBAL_CONF] \| 0x02;
		877	if (cb_1_3->isChecked())
		878	ParameterSet[Set][P_GLOBAL_CONF] = ParameterSet[Set][P_GLOBAL_CONF] \| 0x04;
		879	if (cb_1_4->isChecked())
		880	ParameterSet[Set][P_GLOBAL_CONF] = ParameterSet[Set][P_GLOBAL_CONF] \| 0x08;
		881	if (cb_1_5->isChecked())
		882	ParameterSet[Set][P_GLOBAL_CONF] = ParameterSet[Set][P_GLOBAL_CONF] \| 0x10;
		883	if (cb_1_6->isChecked())
		884	ParameterSet[Set][P_GLOBAL_CONF] = ParameterSet[Set][P_GLOBAL_CONF] \| 0x20;
		885	if (cb_1_7->isChecked())
		886	ParameterSet[Set][P_GLOBAL_CONF] = ParameterSet[Set][P_GLOBAL_CONF] \| 0x40;
		887	if (cb_1_8->isChecked())
		888	ParameterSet[Set][P_GLOBAL_CONF] = ParameterSet[Set][P_GLOBAL_CONF] \| 0x80;
		889
		890	// Seite 2
		891	ParameterSet[Set][P_KANAL_NICK] = sb_2_1->value();
		892	ParameterSet[Set][P_KANAL_ROLL] = sb_2_2->value();
		893	ParameterSet[Set][P_KANAL_GAS] = sb_2_3->value();
		894	ParameterSet[Set][P_KANAL_GIER] = sb_2_4->value();
		895	ParameterSet[Set][P_KANAL_POTI1] = sb_2_5->value();
		896	ParameterSet[Set][P_KANAL_POTI2] = sb_2_6->value();
		897	ParameterSet[Set][P_KANAL_POTI3] = sb_2_7->value();
		898	ParameterSet[Set][P_KANAL_POTI4] = sb_2_8->value();
		899
		900	// Seite 3
		901	ParameterSet[Set][P_STICK_P] = sb_3_1->value();
		902	ParameterSet[Set][P_STICK_D] = sb_3_2->value();
		903	ParameterSet[Set][P_GIER_P] = get_Value(cb_3_3);
		904	ParameterSet[Set][P_EXTERNAL] = get_Value(cb_3_4);
		905
		906	// Seite 4
		907	ParameterSet[Set][P_MAXHOEHE] = get_Value(cb_4_1);
		908	ParameterSet[Set][P_MIN_GAS] = sb_4_2->value();
		909	ParameterSet[Set][P_HOEHE_P] = get_Value(cb_4_3);
		910	ParameterSet[Set][P_DRUCK_D] = get_Value(cb_4_4);
		911	ParameterSet[Set][P_HOEHE_ACC] = get_Value(cb_4_5);
		912	ParameterSet[Set][P_HOEHE_GAIN] = sb_4_6->value();
		913
		914	// Seite 5
		915	ParameterSet[Set][P_GYRO_P] = get_Value(cb_5_1);
		916	ParameterSet[Set][P_GYRO_I] = get_Value(cb_5_2);
		917	ParameterSet[Set][P_DYNAMIC_STAB] = get_Value(cb_5_3);
		918	ParameterSet[Set][P_GYRO_ACC_FAKTOR] = sb_5_4->value();
		919	ParameterSet[Set][P_GYRO_ACC_ABGL] = sb_5_5->value();
		920	ParameterSet[Set][P_FAKTOR_I] = get_Value(cb_5_6);
		921	ParameterSet[Set][P_DRIFT_KOMP] = sb_5_7->value();
		922
		923	// Seite 6
		924	ParameterSet[Set][P_SERVO_NICK_CONT] = get_Value(cb_6_1);
		925	ParameterSet[Set][P_SERVO_NICK_COMP] = sb_6_2->value();
		926	ParameterSet[Set][P_SERVO_NICK_MIN] = sb_6_3->value();
		927	ParameterSet[Set][P_SERVO_NICK_MAX] = sb_6_4->value();
		928	ParameterSet[Set][P_SERVO_NICK_REFR] = sb_6_5->value();
		929	ParameterSet[Set][P_SERVO_NICK_COMPI] = cb_6_6->isChecked();
		930
		931	// Seite 7
		932	ParameterSet[Set][P_GAS_MIN] = sb_7_1->value();
		933	ParameterSet[Set][P_GAS_MAX] = sb_7_2->value();
		934	ParameterSet[Set][P_KOMPASS_WIRKUNG] = get_Value(cb_7_3);
		935	ParameterSet[Set][P_UNTERSPANNUNG] = sb_7_4->value();
		936	ParameterSet[Set][P_NOTGASZEIT] = sb_7_5->value();
		937	ParameterSet[Set][P_NOTGAS] = sb_7_6->value();
		938
		939	// Seite 8
		940	ParameterSet[Set][P_ACHS_KOPPLUNG] = get_Value(cb_8_1);
		941	ParameterSet[Set][P_ACHS_GKOPPLUNG] = get_Value(cb_8_2);
		942
		943	// Seite 9
		944	ParameterSet[Set][P_LOOP_CONFIG] = 0;
		945	if (tb_9_6->text() == QString("1"))
		946	ParameterSet[Set][P_LOOP_CONFIG] = ParameterSet[Set][P_LOOP_CONFIG] \| 0x01;
		947	if (tb_9_7->text() == QString("1"))
		948	ParameterSet[Set][P_LOOP_CONFIG] = ParameterSet[Set][P_LOOP_CONFIG] \| 0x02;
		949	if (tb_9_8->text() == QString("1"))
		950	ParameterSet[Set][P_LOOP_CONFIG] = ParameterSet[Set][P_LOOP_CONFIG] \| 0x04;
		951	if (tb_9_9->text() == QString("1"))
		952	ParameterSet[Set][P_LOOP_CONFIG] = ParameterSet[Set][P_LOOP_CONFIG] \| 0x08;
		953	if (cb_4_7->isChecked())
		954	ParameterSet[Set][P_LOOP_CONFIG] = ParameterSet[Set][P_LOOP_CONFIG] \| 0x10;
		955
		956	ParameterSet[Set][P_LOOP_GAS_LIMIT] = get_Value(cb_9_1);
		957	ParameterSet[Set][P_LOOP_THRESHOLD] = sb_9_2->value();
		958	ParameterSet[Set][P_WINKEL_NICK] = sb_9_3->value();
		959	ParameterSet[Set][P_LOOP_HYSTERESE] = sb_9_4->value();
		960	ParameterSet[Set][P_WINKEL_ROLL] = sb_9_5->value();
		961
		962	// Seite 10
		963	ParameterSet[Set][P_USER_1] = get_Value(cb_10_1);
		964	ParameterSet[Set][P_USER_2] = get_Value(cb_10_2);
		965	ParameterSet[Set][P_USER_3] = get_Value(cb_10_3);
		966	ParameterSet[Set][P_USER_4] = get_Value(cb_10_4);
		967	ParameterSet[Set][P_USER_5] = get_Value(cb_10_5);
		968	ParameterSet[Set][P_USER_6] = get_Value(cb_10_6);
		969	ParameterSet[Set][P_USER_7] = get_Value(cb_10_7);
		970	ParameterSet[Set][P_USER_8] = get_Value(cb_10_8);
		971
		972	// Seite 11
		973	ParameterSet[Set][P_J16_BITMASK] = sb_11_1->value();
		974	ParameterSet[Set][P_J16_TIMING] = get_Value(cb_11_2);
		975	ParameterSet[Set][P_J17_BITMASK] = sb_11_3->value();
		976	ParameterSet[Set][P_J17_TIMING] = get_Value(cb_11_4);
		977
		978	// Seite 12
		979	ParameterSet[Set][P_NAV_GPS_MODE] = get_Value(cb_12_1);
		980	ParameterSet[Set][P_NAV_GPS_GAIN] = get_Value(cb_12_2);
		981	ParameterSet[Set][P_NAV_STICK_THRE] = sb_12_3->value();
		982	ParameterSet[Set][P_NAV_GPS_MIN] = sb_12_4->value();
		983	ParameterSet[Set][P_NAV_GPS_P] = get_Value(cb_12_5);
		984	ParameterSet[Set][P_NAV_GPS_I] = get_Value(cb_12_6);
		985	ParameterSet[Set][P_NAV_GPS_D] = get_Value(cb_12_7);
		986	ParameterSet[Set][P_NAV_GPS_ACC] = get_Value(cb_12_8);
		987
		988	//Seite 13
		989	ParameterSet[Set][P_NAV_WIND_CORR] = get_Value(cb_13_1);
		990	ParameterSet[Set][P_NAV_SPEED_COMP] = get_Value(cb_13_2);
		991	ParameterSet[Set][P_NAV_RADIUS] = get_Value(cb_13_3);
		992	}
		993
159	KeyOz	994	void MKTool::slot_SaveParameter() // DONE 0.71g
158	KeyOz	995	{
		996	int Set = sb_Set->value() + 5;
		997
		998	QString Filename = QFileDialog::getSaveFileName(this, "Mikrokopter Parameter speichern", Settings->DIR.Parameter + le_SetName->text(), "Mikrokopter Parameter(.mkp);;Alle Dateien ()");
		999
		1000	if (!Filename.isEmpty())
		1001	{
		1002	if (!(Filename.endsWith(".mkp", Qt::CaseInsensitive)))
		1003	{
		1004	Filename = Filename + QString(".mkp");
		1005	}
		1006	store_ParameterSet(Set);
		1007	QSettings Setting(Filename, QSettings::IniFormat);
		1008
		1009	Setting.beginGroup("Setup");
		1010	Setting.setValue("Name", le_SetName->text());
		1011	Setting.setValue("GlobalConfig", ParameterSet[Set][P_GLOBAL_CONF]);
		1012	Setting.endGroup();
		1013
		1014	Setting.beginGroup("Channels");
		1015	Setting.setValue("Nick", ParameterSet[Set][P_KANAL_NICK]);
		1016	Setting.setValue("Roll", ParameterSet[Set][P_KANAL_ROLL]);
		1017	Setting.setValue("Gas", ParameterSet[Set][P_KANAL_GAS]);
		1018	Setting.setValue("Gier", ParameterSet[Set][P_KANAL_GIER]);
		1019	Setting.setValue("Poti_1", ParameterSet[Set][P_KANAL_POTI1]);
		1020	Setting.setValue("Poti_2", ParameterSet[Set][P_KANAL_POTI2]);
		1021	Setting.setValue("Poti_3", ParameterSet[Set][P_KANAL_POTI3]);
		1022	Setting.setValue("Poti_4", ParameterSet[Set][P_KANAL_POTI4]);
		1023	Setting.endGroup();
		1024
		1025	Setting.beginGroup("Stick");
		1026	Setting.setValue("Nick_Roll-P", ParameterSet[Set][P_STICK_P]);
		1027	Setting.setValue("Nick_Roll-D", ParameterSet[Set][P_STICK_D]);
		1028	Setting.setValue("Gier-P", ParameterSet[Set][P_GIER_P]);
		1029	Setting.setValue("ExternalControl", ParameterSet[Set][P_EXTERNAL]);
		1030	Setting.endGroup();
		1031
		1032	Setting.beginGroup("Altitude");
		1033	Setting.setValue("Setpoint", ParameterSet[Set][P_MAXHOEHE]);
		1034	Setting.setValue("MinGas", ParameterSet[Set][P_MIN_GAS]);
		1035	Setting.setValue("P", ParameterSet[Set][P_HOEHE_P]);
		1036	Setting.setValue("Barometric-D", ParameterSet[Set][P_DRUCK_D]);
		1037	Setting.setValue("Z-ACC-Effect", ParameterSet[Set][P_HOEHE_ACC]);
		1038	Setting.setValue("Gain", ParameterSet[Set][P_HOEHE_GAIN]);
		1039	Setting.endGroup();
		1040
		1041	Setting.beginGroup("Gyro");
		1042	Setting.setValue("P", ParameterSet[Set][P_GYRO_P]);
		1043	Setting.setValue("I", ParameterSet[Set][P_GYRO_I]);
		1044	Setting.setValue("DynamicStability", ParameterSet[Set][P_DYNAMIC_STAB]);
		1045	Setting.setValue("ACC_Gyro-Factor", ParameterSet[Set][P_GYRO_ACC_FAKTOR]);
		1046	Setting.setValue("ACC_Gyro-Compensation", ParameterSet[Set][P_GYRO_ACC_ABGL]);
		1047	Setting.setValue("DriftCompensation", ParameterSet[Set][P_DRIFT_KOMP]);
		1048	Setting.setValue("Main-I", ParameterSet[Set][P_FAKTOR_I]);
		1049	Setting.endGroup();
		1050
		1051	Setting.beginGroup("Camera");
		1052	Setting.setValue("ServoNickControl", ParameterSet[Set][P_SERVO_NICK_CONT]);
		1053	Setting.setValue("ServoNickCompensation", ParameterSet[Set][P_SERVO_NICK_COMP]);
		1054	Setting.setValue("ServoNickInvert", ParameterSet[Set][P_SERVO_NICK_COMPI]);
		1055	Setting.setValue("ServoNickMin", ParameterSet[Set][P_SERVO_NICK_MIN]);
		1056	Setting.setValue("ServoNickMax", ParameterSet[Set][P_SERVO_NICK_MAX]);
		1057	Setting.setValue("ServoNickRefreshRate", ParameterSet[Set][P_SERVO_NICK_REFR]);
		1058	Setting.endGroup();
		1059
		1060	Setting.beginGroup("Others");
		1061	Setting.setValue("MinGas", ParameterSet[Set][P_GAS_MIN]);
		1062	Setting.setValue("MaxGas", ParameterSet[Set][P_GAS_MAX]);
		1063	Setting.setValue("Compass-Effect", ParameterSet[Set][P_KOMPASS_WIRKUNG]);
		1064	Setting.setValue("UnderVoltage", ParameterSet[Set][P_UNTERSPANNUNG]);
		1065	Setting.setValue("NotGas", ParameterSet[Set][P_NOTGAS]);
		1066	Setting.setValue("NotGasTime", ParameterSet[Set][P_NOTGASZEIT]);
		1067	Setting.endGroup();
		1068
		1069	Setting.beginGroup("Coupling");
		1070	Setting.setValue("YawPosFeedback", ParameterSet[Set][P_ACHS_KOPPLUNG]);
		1071	Setting.setValue("YawNegFeedback", ParameterSet[Set][P_ACHS_GKOPPLUNG]);
		1072	Setting.endGroup();
		1073
		1074	Setting.beginGroup("Loop");
		1075	Setting.setValue("Config", ParameterSet[Set][P_LOOP_CONFIG]);
		1076	Setting.setValue("GasLimit", ParameterSet[Set][P_LOOP_GAS_LIMIT]);
		1077	Setting.setValue("StickThreshold", ParameterSet[Set][P_LOOP_THRESHOLD]);
		1078	Setting.setValue("LoopHysteresis", ParameterSet[Set][P_LOOP_HYSTERESE]);
		1079	Setting.setValue("TurnOverNick", ParameterSet[Set][P_WINKEL_NICK]);
		1080	Setting.setValue("TurnOverRoll", ParameterSet[Set][P_WINKEL_ROLL]);
		1081	Setting.endGroup();
		1082
		1083	Setting.beginGroup("User");
		1084	Setting.setValue("Parameter_1", ParameterSet[Set][P_USER_1]);
		1085	Setting.setValue("Parameter_2", ParameterSet[Set][P_USER_2]);
		1086	Setting.setValue("Parameter_3", ParameterSet[Set][P_USER_3]);
		1087	Setting.setValue("Parameter_4", ParameterSet[Set][P_USER_4]);
		1088	Setting.setValue("Parameter_5", ParameterSet[Set][P_USER_5]);
		1089	Setting.setValue("Parameter_6", ParameterSet[Set][P_USER_6]);
		1090	Setting.setValue("Parameter_7", ParameterSet[Set][P_USER_7]);
		1091	Setting.setValue("Parameter_8", ParameterSet[Set][P_USER_8]);
		1092	Setting.endGroup();
		1093
		1094	Setting.beginGroup("Output");
		1095	Setting.setValue("J16_Bitmask", ParameterSet[Set][P_J16_BITMASK]);
		1096	Setting.setValue("J16_Timing", ParameterSet[Set][P_J16_TIMING]);
		1097	Setting.setValue("J17_Bitmask", ParameterSet[Set][P_J17_BITMASK]);
		1098	Setting.setValue("J17_Timing", ParameterSet[Set][P_J17_TIMING]);
		1099	Setting.endGroup();
		1100
		1101	Setting.beginGroup("NaviCtrl");
		1102	Setting.setValue("GPS_ModeControl", ParameterSet[Set][P_NAV_GPS_MODE]);
		1103	Setting.setValue("GPS_Gain", ParameterSet[Set][P_NAV_GPS_GAIN]);
		1104	Setting.setValue("GPS_P", ParameterSet[Set][P_NAV_GPS_P]);
		1105	Setting.setValue("GPS_I", ParameterSet[Set][P_NAV_GPS_I]);
		1106	Setting.setValue("GPS_D", ParameterSet[Set][P_NAV_GPS_D]);
		1107	Setting.setValue("GPS_Acc", ParameterSet[Set][P_NAV_GPS_ACC]);
		1108	Setting.setValue("GPS_MinSat", ParameterSet[Set][P_NAV_GPS_MIN]);
		1109	Setting.setValue("GPS_StickThreshold", ParameterSet[Set][P_NAV_STICK_THRE]);
		1110	Setting.setValue("GPS_WindCorrection", ParameterSet[Set][P_NAV_WIND_CORR]);
		1111	Setting.setValue("GPS_SpeedCompensation", ParameterSet[Set][P_NAV_SPEED_COMP]);
		1112	Setting.setValue("GPS_MaxRadius", ParameterSet[Set][P_NAV_RADIUS]);
		1113	Setting.endGroup();
		1114	}
		1115	}
		1116
159	KeyOz	1117	void MKTool::slot_LoadParameter() // DONE 0.71g
158	KeyOz	1118	{
		1119	QString Filename = QFileDialog::getOpenFileName(this, "Mikrokopter Parameter laden", Settings->DIR.Parameter, "Mikrokopter Parameter(.mkp);;Alle Dateien ()");
		1120
		1121	if (!Filename.isEmpty())
		1122	{
		1123	int Set = sb_Set->value();
		1124	QSettings Setting(Filename, QSettings::IniFormat);
		1125
		1126	Setting.beginGroup("Setup");
		1127	QString Name = Setting.value("Name", QString("--noname--")).toString();
		1128	char *CName = Name.toLatin1().data();
		1129	int a;
		1130
		1131	for (a=0; a < Name.length(); a++)
		1132	{
		1133	ParameterSet[Set][P_NAME+a] = CName[a];
		1134	}
		1135	while (a < 12)
		1136	{
		1137	ParameterSet[Set][P_NAME+a] = 0;
		1138	a++;
		1139	}
		1140
		1141	ParameterSet[Set][P_GLOBAL_CONF] = Setting.value("GlobalConfig", 0).toInt();
		1142	Setting.endGroup();
		1143
		1144	Setting.beginGroup("Channels");
		1145	ParameterSet[Set][P_KANAL_NICK] = Setting.value("Nick", 1).toInt();
		1146	ParameterSet[Set][P_KANAL_ROLL] = Setting.value("Roll", 2).toInt();
		1147	ParameterSet[Set][P_KANAL_GAS] = Setting.value("Gas", 3).toInt();
		1148	ParameterSet[Set][P_KANAL_GIER] = Setting.value("Gier", 4).toInt();
		1149	ParameterSet[Set][P_KANAL_POTI1] = Setting.value("Poti_1", 5).toInt();
		1150	ParameterSet[Set][P_KANAL_POTI2] = Setting.value("Poti_2", 6).toInt();
		1151	ParameterSet[Set][P_KANAL_POTI3] = Setting.value("Poti_3", 7).toInt();
		1152	ParameterSet[Set][P_KANAL_POTI4] = Setting.value("Poti_4", 8).toInt();
		1153	Setting.endGroup();
		1154
		1155	Setting.beginGroup("Stick");
		1156	ParameterSet[Set][P_STICK_P] = Setting.value("Nick_Roll-P", 4).toInt();
		1157	ParameterSet[Set][P_STICK_D] = Setting.value("Nick_Roll-D", 8).toInt();
		1158	ParameterSet[Set][P_GIER_P] = Setting.value("Gier-P", 1).toInt();
		1159	ParameterSet[Set][P_EXTERNAL] = Setting.value("ExternalControl", 1).toInt();
		1160	Setting.endGroup();
		1161
		1162	Setting.beginGroup("Altitude");
		1163	ParameterSet[Set][P_MAXHOEHE] = Setting.value("Setpoint", 251).toInt();
		1164	ParameterSet[Set][P_MIN_GAS] = Setting.value("MinGas", 30).toInt();
		1165	ParameterSet[Set][P_HOEHE_P] = Setting.value("P", 10).toInt();
		1166	ParameterSet[Set][P_DRUCK_D] = Setting.value("Barometric-D", 30).toInt();
		1167	ParameterSet[Set][P_HOEHE_ACC] = Setting.value("Z-ACC-Effect", 30).toInt();
		1168	ParameterSet[Set][P_HOEHE_GAIN] = Setting.value("Gain", 3).toInt();
		1169	Setting.endGroup();
		1170
		1171	Setting.beginGroup("Gyro");
		1172	ParameterSet[Set][P_GYRO_P] = Setting.value("P", 80).toInt();
		1173	ParameterSet[Set][P_GYRO_I] = Setting.value("I", 120).toInt();
		1174	ParameterSet[Set][P_DYNAMIC_STAB] = Setting.value("DynamicStability", 75).toInt();
		1175	ParameterSet[Set][P_GYRO_ACC_FAKTOR] = Setting.value("ACC_Gyro-Factor", 30).toInt();
		1176	ParameterSet[Set][P_GYRO_ACC_ABGL] = Setting.value("ACC_Gyro-Compensation", 32).toInt();
		1177	ParameterSet[Set][P_DRIFT_KOMP] = Setting.value("DriftCompensation", 4).toInt();
		1178	ParameterSet[Set][P_FAKTOR_I] = Setting.value("Main-I", 32).toInt();
		1179	Setting.endGroup();
		1180
		1181	Setting.beginGroup("Camera");
		1182	ParameterSet[Set][P_SERVO_NICK_CONT] = Setting.value("ServoNickControl", 100).toInt();
		1183	ParameterSet[Set][P_SERVO_NICK_COMP] = Setting.value("ServoNickCompensation", 40).toInt();
		1184	ParameterSet[Set][P_SERVO_NICK_COMPI] = Setting.value("ServoNickInvert", 0).toInt();
		1185	ParameterSet[Set][P_SERVO_NICK_MIN] = Setting.value("ServoNickMin", 50).toInt();
		1186	ParameterSet[Set][P_SERVO_NICK_MAX] = Setting.value("ServoNickMax", 150).toInt();
		1187	ParameterSet[Set][P_SERVO_NICK_REFR] = Setting.value("ServoNickRefreshRate", 5).toInt();
		1188	Setting.endGroup();
		1189
		1190	Setting.beginGroup("Others");
		1191	ParameterSet[Set][P_GAS_MIN] = Setting.value("MinGas", 8).toInt();
		1192	ParameterSet[Set][P_GAS_MAX] = Setting.value("MaxGas", 230).toInt();
		1193	ParameterSet[Set][P_KOMPASS_WIRKUNG] = Setting.value("Compass-Effect", 128).toInt();
		1194	ParameterSet[Set][P_UNTERSPANNUNG] = Setting.value("UnderVoltage", 94).toInt();
		1195	ParameterSet[Set][P_NOTGAS] = Setting.value("NotGas", 35).toInt();
		1196	ParameterSet[Set][P_NOTGASZEIT] = Setting.value("NotGasTime", 30).toInt();
		1197	Setting.endGroup();
		1198
		1199	Setting.beginGroup("Coupling");
		1200	ParameterSet[Set][P_ACHS_KOPPLUNG] = Setting.value("YawPosFeedback", 90).toInt();
		1201	ParameterSet[Set][P_ACHS_GKOPPLUNG] = Setting.value("YawNegFeedback", 5).toInt();
		1202	Setting.endGroup();
		1203
		1204	Setting.beginGroup("Loop");
		1205	ParameterSet[Set][P_LOOP_CONFIG] = Setting.value("Config", 0).toInt();
		1206	ParameterSet[Set][P_LOOP_GAS_LIMIT] = Setting.value("GasLimit", 50).toInt();
		1207	ParameterSet[Set][P_LOOP_THRESHOLD] = Setting.value("StickThreshold", 90).toInt();
		1208	ParameterSet[Set][P_LOOP_HYSTERESE] = Setting.value("LoopHysteresis", 50).toInt();
		1209	ParameterSet[Set][P_WINKEL_NICK] = Setting.value("TurnOverNick", 85).toInt();
		1210	ParameterSet[Set][P_WINKEL_ROLL] = Setting.value("TurnOverRoll", 85).toInt();
		1211	Setting.endGroup();
		1212
		1213	Setting.beginGroup("User");
		1214	ParameterSet[Set][P_USER_1] = Setting.value("Parameter_1", 0).toInt();
		1215	ParameterSet[Set][P_USER_2] = Setting.value("Parameter_2", 0).toInt();
		1216	ParameterSet[Set][P_USER_3] = Setting.value("Parameter_3", 0).toInt();
		1217	ParameterSet[Set][P_USER_4] = Setting.value("Parameter_4", 0).toInt();
		1218	ParameterSet[Set][P_USER_5] = Setting.value("Parameter_5", 0).toInt();
		1219	ParameterSet[Set][P_USER_6] = Setting.value("Parameter_6", 0).toInt();
		1220	ParameterSet[Set][P_USER_7] = Setting.value("Parameter_7", 0).toInt();
		1221	ParameterSet[Set][P_USER_8] = Setting.value("Parameter_8", 0).toInt();
		1222	Setting.endGroup();
		1223
		1224	Setting.beginGroup("Output");
		1225	ParameterSet[Set][P_J16_BITMASK] = Setting.value("J16_Bitmask", 255).toInt();
		1226	ParameterSet[Set][P_J16_TIMING] = Setting.value("J16_Timing", 251).toInt();
		1227	ParameterSet[Set][P_J17_BITMASK] = Setting.value("J17_Bitmask", 255).toInt();
		1228	ParameterSet[Set][P_J17_TIMING] = Setting.value("J17_Timing", 251).toInt();
		1229	Setting.endGroup();
		1230
		1231	Setting.beginGroup("NaviCtrl");
		1232	ParameterSet[Set][P_NAV_GPS_MODE] = Setting.value("GPS_ModeControl", 253).toInt();
		1233	ParameterSet[Set][P_NAV_GPS_GAIN] = Setting.value("GPS_Gain", 100).toInt();
		1234	ParameterSet[Set][P_NAV_GPS_P] = Setting.value("GPS_P", 90).toInt();
		1235	ParameterSet[Set][P_NAV_GPS_I] = Setting.value("GPS_I", 90).toInt();
		1236	ParameterSet[Set][P_NAV_GPS_D] = Setting.value("GPS_D", 90).toInt();
		1237	ParameterSet[Set][P_NAV_GPS_ACC] = Setting.value("GPS_Acc", 0).toInt();
		1238	ParameterSet[Set][P_NAV_GPS_MIN] = Setting.value("GPS_MinSat", 6).toInt();
		1239	ParameterSet[Set][P_NAV_STICK_THRE] = Setting.value("GPS_StickThreshold", 8).toInt();
		1240	ParameterSet[Set][P_NAV_WIND_CORR] = Setting.value("GPS_WindCorrection", 90).toInt();
		1241	ParameterSet[Set][P_NAV_SPEED_COMP] = Setting.value("GPS_SpeedCompensation", 30).toInt();
		1242	ParameterSet[Set][P_NAV_RADIUS] = Setting.value("GPS_MaxRadius", 100).toInt();
		1243	Setting.endGroup();
		1244
		1245	show_ParameterSet(Set);
		1246	}
		1247	}
		1248
159	KeyOz	1249	void MKTool::show_ParameterSet(int Set) // DONE 0.71g
158	KeyOz	1250	{
		1251	char Name[12];
		1252	for (int a = 0; a < 12; a++)
		1253	{
		1254	Name[a] = ParameterSet[Set][P_NAME+a];
		1255	}
		1256	le_SetName->setText(QString(Name));
		1257
		1258	// Seite 1
		1259	{
		1260	cb_1_1->setChecked(ParameterSet[Set][P_GLOBAL_CONF] & 0x01);
		1261	cb_1_2->setChecked(ParameterSet[Set][P_GLOBAL_CONF] & 0x02);
		1262	cb_1_3->setChecked(ParameterSet[Set][P_GLOBAL_CONF] & 0x04);
		1263	cb_1_4->setChecked(ParameterSet[Set][P_GLOBAL_CONF] & 0x08);
		1264	cb_1_5->setChecked(ParameterSet[Set][P_GLOBAL_CONF] & 0x10);
		1265	cb_1_6->setChecked(ParameterSet[Set][P_GLOBAL_CONF] & 0x20);
		1266	cb_1_7->setChecked(ParameterSet[Set][P_GLOBAL_CONF] & 0x40);
		1267	cb_1_8->setChecked(ParameterSet[Set][P_GLOBAL_CONF] & 0x80);
		1268	}
		1269	// Seite 2
		1270	{
		1271	sb_2_1->setValue(ParameterSet[Set][P_KANAL_NICK]);
		1272	sb_2_2->setValue(ParameterSet[Set][P_KANAL_ROLL]);
		1273	sb_2_3->setValue(ParameterSet[Set][P_KANAL_GAS]);
		1274	sb_2_4->setValue(ParameterSet[Set][P_KANAL_GIER]);
		1275	sb_2_5->setValue(ParameterSet[Set][P_KANAL_POTI1]);
		1276	sb_2_6->setValue(ParameterSet[Set][P_KANAL_POTI2]);
		1277	sb_2_7->setValue(ParameterSet[Set][P_KANAL_POTI3]);
		1278	sb_2_8->setValue(ParameterSet[Set][P_KANAL_POTI4]);
		1279	}
		1280	// Seite 3
		1281	{
		1282	sb_3_1->setValue(ParameterSet[Set][P_STICK_P]);
		1283	sb_3_2->setValue(ParameterSet[Set][P_STICK_D]);
		1284	cb_3_3 = setCombo(cb_3_3, Set, P_GIER_P);
		1285	cb_3_4 = setCombo(cb_3_4, Set, P_EXTERNAL);
		1286	}
		1287	// Seite 4
		1288	{
		1289	cb_4_1 = setCombo(cb_4_1, Set, P_MAXHOEHE);
		1290	sb_4_2->setValue(ParameterSet[Set][P_MIN_GAS]);
		1291	cb_4_3 = setCombo(cb_4_3, Set, P_HOEHE_P);
		1292	cb_4_4 = setCombo(cb_4_4, Set, P_DRUCK_D);
		1293	cb_4_5 = setCombo(cb_4_5, Set, P_HOEHE_ACC);
		1294	sb_4_6->setValue(ParameterSet[Set][P_HOEHE_GAIN]);
		1295	cb_4_7->setChecked(ParameterSet[Set][P_LOOP_CONFIG] & 0x10);
		1296	}
		1297	// Seite 5
		1298	{
		1299	cb_5_1 = setCombo(cb_5_1, Set, P_GYRO_P);
		1300	cb_5_2 = setCombo(cb_5_2, Set, P_GYRO_I);
		1301	cb_5_3 = setCombo(cb_5_3, Set, P_DYNAMIC_STAB);
		1302	sb_5_4->setValue(ParameterSet[Set][P_GYRO_ACC_FAKTOR]);
		1303	sb_5_5->setValue(ParameterSet[Set][P_GYRO_ACC_ABGL]);
		1304	cb_5_6 = setCombo(cb_5_6, Set, P_FAKTOR_I);
		1305	sb_5_7->setValue(ParameterSet[Set][P_DRIFT_KOMP]);
		1306	}
		1307	// Seite 6
		1308	{
		1309	cb_6_1 = setCombo(cb_6_1, Set, P_SERVO_NICK_CONT);
		1310	sb_6_2->setValue(ParameterSet[Set][P_SERVO_NICK_COMP]);
		1311	sb_6_3->setValue(ParameterSet[Set][P_SERVO_NICK_MIN]);
		1312	sb_6_4->setValue(ParameterSet[Set][P_SERVO_NICK_MAX]);
		1313	sb_6_5->setValue(ParameterSet[Set][P_SERVO_NICK_REFR]);
		1314	cb_6_6->setChecked(ParameterSet[Set][P_SERVO_NICK_COMPI]);
		1315	}
		1316	// Seite 7
		1317	{
		1318	sb_7_1->setValue(ParameterSet[Set][P_GAS_MIN]);
		1319	sb_7_2->setValue(ParameterSet[Set][P_GAS_MAX]);
		1320	cb_7_3 = setCombo(cb_7_3, Set, P_KOMPASS_WIRKUNG);
		1321	sb_7_4->setValue(ParameterSet[Set][P_UNTERSPANNUNG]);
		1322	sb_7_5->setValue(ParameterSet[Set][P_NOTGASZEIT]);
		1323	sb_7_6->setValue(ParameterSet[Set][P_NOTGAS]);
		1324	}
		1325	// Seite 8
		1326	{
		1327	cb_8_1 = setCombo(cb_8_1, Set, P_ACHS_KOPPLUNG);
		1328	cb_8_2 = setCombo(cb_8_2, Set, P_ACHS_GKOPPLUNG);
		1329	}
		1330	// Seite 9
		1331	{
		1332	if (ParameterSet[Set][P_LOOP_CONFIG] & 0x01)
		1333	{
		1334	tb_9_6->setIcon(Icons[20]);
		1335	tb_9_6->setText("1");
		1336	}
		1337	else
		1338	{
		1339	tb_9_6->setIcon(Icons[21]);
		1340	tb_9_6->setText("0");
		1341	}
		1342
		1343	if (ParameterSet[Set][P_LOOP_CONFIG] & 0x02)
		1344	{
		1345	tb_9_7->setIcon(Icons[22]);
		1346	tb_9_7->setText("1");
		1347	}
		1348	else
		1349	{
		1350	tb_9_7->setIcon(Icons[23]);
		1351	tb_9_7->setText("0");
		1352	}
		1353
		1354	if (ParameterSet[Set][P_LOOP_CONFIG] & 0x04)
		1355	{
		1356	tb_9_8->setIcon(Icons[24]);
		1357	tb_9_8->setText("1");
		1358	}
		1359	else
		1360	{
		1361	tb_9_8->setIcon(Icons[25]);
		1362	tb_9_8->setText("0");
		1363	}
		1364
		1365	if (ParameterSet[Set][P_LOOP_CONFIG] & 0x08)
		1366	{
		1367	tb_9_9->setIcon(Icons[26]);
		1368	tb_9_9->setText("1");
		1369	}
		1370	else
		1371	{
		1372	tb_9_9->setIcon(Icons[27]);
		1373	tb_9_9->setText("0");
		1374	}
		1375
		1376	cb_9_1 = setCombo(cb_9_1, Set, P_LOOP_GAS_LIMIT);
		1377	sb_9_2->setValue(ParameterSet[Set][P_LOOP_THRESHOLD]);
		1378	sb_9_3->setValue(ParameterSet[Set][P_WINKEL_NICK]);
		1379	sb_9_4->setValue(ParameterSet[Set][P_LOOP_HYSTERESE]);
		1380	sb_9_5->setValue(ParameterSet[Set][P_WINKEL_ROLL]);
		1381	}
		1382	// Seite 10
		1383	{
		1384	cb_10_1 = setCombo(cb_10_1, Set, P_USER_1);
		1385	cb_10_2 = setCombo(cb_10_2, Set, P_USER_2);
		1386	cb_10_3 = setCombo(cb_10_3, Set, P_USER_3);
		1387	cb_10_4 = setCombo(cb_10_4, Set, P_USER_4);
		1388	cb_10_5 = setCombo(cb_10_5, Set, P_USER_5);
		1389	cb_10_6 = setCombo(cb_10_6, Set, P_USER_6);
		1390	cb_10_7 = setCombo(cb_10_7, Set, P_USER_7);
		1391	cb_10_8 = setCombo(cb_10_8, Set, P_USER_8);
		1392	}
		1393	// Seite 11
		1394	{
		1395	sb_11_1->setValue(ParameterSet[Set][P_J16_BITMASK]);
		1396	cb_11_2 = setCombo(cb_11_2, Set, P_J16_TIMING);
		1397	sb_11_3->setValue(ParameterSet[Set][P_J17_BITMASK]);
		1398	cb_11_4 = setCombo(cb_11_4, Set, P_J17_TIMING);
		1399	}
		1400	// Seite 12
		1401	{
		1402	cb_12_1 = setCombo(cb_12_1, Set, P_NAV_GPS_MODE);
		1403	cb_12_2 = setCombo(cb_12_2, Set, P_NAV_GPS_GAIN);
		1404	sb_12_3->setValue(ParameterSet[Set][P_NAV_STICK_THRE]);
		1405	sb_12_4->setValue(ParameterSet[Set][P_NAV_GPS_MIN]);
		1406	cb_12_5 = setCombo(cb_12_5, Set, P_NAV_GPS_P);
		1407	cb_12_6 = setCombo(cb_12_6, Set, P_NAV_GPS_I);
		1408	cb_12_7 = setCombo(cb_12_7, Set, P_NAV_GPS_D);
		1409	cb_12_8 = setCombo(cb_12_8, Set, P_NAV_GPS_ACC);
		1410	}
		1411
		1412	// Seite 13
		1413	{
		1414	cb_13_1 = setCombo(cb_13_1, Set, P_NAV_WIND_CORR);
		1415	cb_13_2 = setCombo(cb_13_2, Set, P_NAV_SPEED_COMP);
		1416	cb_13_3 = setCombo(cb_13_3, Set, P_NAV_RADIUS);
		1417	}
		1418
		1419
		1420	}
		1421
159	KeyOz	1422	void MKTool::slot_TabChanged(int Tab) // DONE 0.71g
158	KeyOz	1423	{
		1424	Tab = Tab;
162	KeyOz	1425	if (tab_Main->count() != 0)
158	KeyOz	1426	{
162	KeyOz	1427	if ((tab_Main->currentWidget()->objectName() == QString("Tab_2")) && (tab_Par->currentIndex() == 1))
		1428	{
		1429	TX_Data[0] = 0;
		1430	send_Data('p', ADDRESS_FC, TX_Data, 0, true);
159	KeyOz	1431
162	KeyOz	1432	Ticker->setInterval(500);
		1433	TickerEvent[1] = true;
		1434	}
		1435	else
		1436	{
		1437	Ticker->setInterval(2000);
		1438	TickerEvent[1] = false;
		1439	}
159	KeyOz	1440
162	KeyOz	1441	if ((tab_Main->currentWidget()->objectName() == QString("Tab_4")))
		1442	{
		1443	TX_Data[0] = 0;
		1444	TX_Data[1] = 0;
		1445	send_Data('l', ADDRESS_ALL, TX_Data, 1, true);
159	KeyOz	1446
162	KeyOz	1447	Ticker->setInterval(500);
		1448	TickerEvent[2] = true;
		1449	}
		1450	else
		1451	{
		1452	Ticker->setInterval(2000);
		1453	TickerEvent[2] = false;
		1454	}
159	KeyOz	1455	}
158	KeyOz	1456	}
		1457
159	KeyOz	1458	void MKTool::slot_LCD_UP() // DONE 0.71g
158	KeyOz	1459	{
159	KeyOz	1460	if (LCD_Page == LCD_MAX_Page)
		1461	TX_Data[0] = 0;
		1462	else
		1463	TX_Data[0] = LCD_Page + 1;
		1464
		1465	TX_Data[1] = 0;
		1466	send_Data('l', ADDRESS_ALL, TX_Data, 1, true);
		1467	}
		1468
		1469	void MKTool::slot_LCD_DOWN() // DONE 0.71g
		1470	{
		1471	if (LCD_Page == 0)
		1472	TX_Data[0] = LCD_MAX_Page;
		1473	else
		1474	TX_Data[0] = LCD_Page - 1;
		1475
		1476	TX_Data[1] = 0;
		1477	send_Data('l', ADDRESS_ALL, TX_Data, 1, true);
		1478	}
		1479
		1480	void MKTool::slot_GetParameter() // DONE 0.71g
		1481	{
158	KeyOz	1482	TX_Data[0] = sb_Set->value();
		1483	TX_Data[1] = 0;
159	KeyOz	1484	send_Data('q', ADDRESS_FC, TX_Data, 1);
158	KeyOz	1485	}
		1486
159	KeyOz	1487	void MKTool::slot_SetParameter() // DONE 0.71g
158	KeyOz	1488	{
		1489	store_ParameterSet(sb_Set->value());
		1490
159	KeyOz	1491	TX_Data[0] = sb_Set->value();
		1492	TX_Data[1] = VERSION_SETTINGS;
		1493
		1494	for (int a = 0; a < MaxParameter; a++)
158	KeyOz	1495	{
159	KeyOz	1496	TX_Data[a + 2] = ParameterSet[sb_Set->value()][a];
158	KeyOz	1497	}
		1498
		1499	store_ParameterSet(sb_Set->value());
		1500
159	KeyOz	1501	send_Data('s', ADDRESS_FC, TX_Data, MaxParameter + 2, false);
158	KeyOz	1502	}
		1503
159	KeyOz	1504
		1505	// Save GUI-Settings
		1506	////////////////////
158	KeyOz	1507	void MKTool::write_Settings()
		1508	{
		1509	QBitArray TabViews(6);
		1510	TabViews.setBit(0, ac_View0->isChecked());
		1511	TabViews.setBit(1, ac_View1->isChecked());
		1512	TabViews.setBit(2, ac_View2->isChecked());
		1513	TabViews.setBit(3, ac_View3->isChecked());
		1514	TabViews.setBit(4, ac_View4->isChecked());
		1515	TabViews.setBit(5, ac_View5->isChecked());
		1516
162	KeyOz	1517	Settings->GUI.Term_Info = cb_ShowMSG->isChecked();
		1518	Settings->GUI.Term_Data = cb_ShowData->isChecked();
		1519	Settings->GUI.Term_Always = cb_ShowAlways->isChecked();
		1520
158	KeyOz	1521	QSettings Setting("KeyOz-Net", "QMK-Groundstation");
		1522
		1523	Setting.beginGroup("Port");
		1524	Setting.setValue("TTY", le_Port->text());
		1525	Setting.endGroup();
		1526
		1527	Setting.beginGroup("GUI");
		1528	Setting.setValue("IsMax", isMaximized());
		1529	Setting.setValue("Size", size());
		1530	Setting.setValue("Point", pos());
		1531	Setting.setValue("TabViews", QBitArray(TabViews));
		1532	Setting.endGroup();
		1533	}
		1534
159	KeyOz	1535
158	KeyOz	1536	// Debug-Daten anzeigen und Aufzeichnen
		1537	///////////////////////////////////////
		1538	void MKTool::write_CSV()
		1539	{
		1540	QTextStream Out(CSVFile);
		1541	for (int a=0; a<MaxAnalog; a++)
		1542	{
162	KeyOz	1543	if (Settings->Analog1.LogView[a])
158	KeyOz	1544	{
		1545	Out << AnalogData[a];
		1546	if (a < MaxAnalog - 1)
		1547	Out << ';';
		1548	}
		1549	}
		1550	Out << "\n";
		1551	}
		1552
159	KeyOz	1553	void MKTool::slot_RecordCSV() // DONE 0.71g
158	KeyOz	1554	{
		1555	if (!CSVFile->isOpen())
		1556	{
159	KeyOz	1557	QString Filename = Settings->DIR.Logging + Mode.Hardware + " - " + QDate::currentDate().toString(("yyyy-MM-dd")) + " -- " + QTime::currentTime().toString("hh-mm") + ".csv";
158	KeyOz	1558
		1559	CSVFile = new QFile(Filename);
		1560	if (!CSVFile->exists())
		1561	{
		1562	CSVFile->open(QIODevice::Append \| QIODevice::Text);
		1563
		1564	QTextStream Out(CSVFile);
		1565
		1566	for (int a = 0; a < MaxAnalog; a++)
		1567	{
162	KeyOz	1568	if (Settings->Analog1.LogView[a])
158	KeyOz	1569	{
162	KeyOz	1570	Out << Settings->Analog1.Label[a];
158	KeyOz	1571
		1572	if (a < MaxAnalog - 1)
		1573	Out << ';';
		1574	}
		1575	}
		1576	Out << "\n";
		1577	}
		1578	else
		1579	{
		1580	CSVFile->open(QIODevice::Append \| QIODevice::Text);
		1581	}
		1582
		1583	pb_Record->setIcon(Icons[6]);
		1584	pb_Record->setText("CSV Stop");
		1585	ac_RecordCSV->setIcon(Icons[6]);
		1586	ac_RecordCSV->setText("CSV Stop");
		1587	}
		1588	else
		1589	{
		1590	CSVFile->close();
		1591	pb_Record->setIcon(Icons[7]);
		1592	pb_Record->setText("CSV Aufzeichnen");
		1593	ac_RecordCSV->setIcon(Icons[7]);
		1594	ac_RecordCSV->setText("CSV Aufzeichnen");
		1595	}
		1596	}
		1597
		1598	void MKTool::show_DebugData()
		1599	{
		1600	if (CSVFile->isOpen())
		1601	{
		1602	write_CSV();
		1603	}
		1604
		1605	if (ac_StartPlotter->isChecked())
		1606	{
		1607	aID[NextPlot] = NextPlot;
		1608
		1609	for (int a = 0; a < MaxAnalog; a++)
		1610	{
		1611	aData[a][NextPlot] = AnalogData[a];
		1612	}
		1613	NextPlot++;
		1614
		1615	if ((tab_Main->currentWidget()->objectName() == QString("Tab_1")))
		1616	update_Plot();
		1617	}
		1618
		1619	le_A_0->setText(QString("%1").arg(AnalogData[0]));
		1620	le_A_1->setText(QString("%1").arg(AnalogData[1]));
		1621	le_A_2->setText(QString("%1").arg(AnalogData[2]));
		1622	le_A_3->setText(QString("%1").arg(AnalogData[3]));
		1623	le_A_4->setText(QString("%1").arg(AnalogData[4]));
		1624	le_A_5->setText(QString("%1").arg(AnalogData[5]));
		1625	le_A_6->setText(QString("%1").arg(AnalogData[6]));
		1626	le_A_7->setText(QString("%1").arg(AnalogData[7]));
		1627	le_A_8->setText(QString("%1").arg(AnalogData[8]));
		1628	le_A_9->setText(QString("%1").arg(AnalogData[9]));
		1629	le_A_10->setText(QString("%1").arg(AnalogData[10]));
		1630	le_A_11->setText(QString("%1").arg(AnalogData[11]));
		1631	le_A_12->setText(QString("%1").arg(AnalogData[12]));
		1632	le_A_13->setText(QString("%1").arg(AnalogData[13]));
		1633	le_A_14->setText(QString("%1").arg(AnalogData[14]));
		1634	le_A_15->setText(QString("%1").arg(AnalogData[15]));
		1635	le_A_16->setText(QString("%1").arg(AnalogData[16]));
		1636	le_A_17->setText(QString("%1").arg(AnalogData[17]));
		1637	le_A_18->setText(QString("%1").arg(AnalogData[18]));
		1638	le_A_19->setText(QString("%1").arg(AnalogData[19]));
		1639	le_A_20->setText(QString("%1").arg(AnalogData[20]));
		1640	le_A_21->setText(QString("%1").arg(AnalogData[21]));
		1641	le_A_22->setText(QString("%1").arg(AnalogData[22]));
		1642	le_A_23->setText(QString("%1").arg(AnalogData[23]));
		1643	le_A_24->setText(QString("%1").arg(AnalogData[24]));
		1644	le_A_25->setText(QString("%1").arg(AnalogData[25]));
		1645	le_A_26->setText(QString("%1").arg(AnalogData[26]));
		1646	le_A_27->setText(QString("%1").arg(AnalogData[27]));
		1647	le_A_28->setText(QString("%1").arg(AnalogData[28]));
		1648	le_A_29->setText(QString("%1").arg(AnalogData[29]));
		1649	le_A_30->setText(QString("%1").arg(AnalogData[30]));
		1650	le_A_31->setText(QString("%1").arg(AnalogData[31]));
		1651	}
		1652
159	KeyOz	1653
158	KeyOz	1654	// Seriel-Port Bereich, Befehle senden und Daten empfangen
		1655	//////////////////////////////////////////////////////////
		1656
		1657	// Neues Datenpacket empfangen -> Verarbeiten
159	KeyOz	1658	void MKTool::new_RXData(sRxData RX) // DONE 0.71g
158	KeyOz	1659	{
		1660
		1661	if (LastSend.length() > 2)
		1662	{
		1663	}
		1664
162	KeyOz	1665	int HardwareID = RX.Input[1] - 'a';
		1666
158	KeyOz	1667	switch(RX.Input[2])
		1668	{
159	KeyOz	1669	case 'L' : // DONE 0.71g
158	KeyOz	1670	if (ToolBox::Decode64(RX, true))
		1671	{
159	KeyOz	1672	int LCD[150];
		1673	memcpy(LCD,RX.Decode, sizeof(RX.Decode));
		1674
		1675	LCD_Page = RX.Decode[0];
		1676	LCD_MAX_Page = RX.Decode[1];
		1677
		1678	le_LCD0->setText(ToolBox::Data2QString(LCD,2,22));
		1679	le_LCD1->setText(ToolBox::Data2QString(LCD,22,42));
		1680	le_LCD2->setText(ToolBox::Data2QString(LCD,42,62));
		1681	le_LCD3->setText(ToolBox::Data2QString(LCD,62,82));
		1682
		1683	TickerEvent[0] = false;
158	KeyOz	1684	}
		1685	break;
159	KeyOz	1686	case 'P' : // DONE 0.71g
158	KeyOz	1687	if (ToolBox::Decode64(RX, true))
		1688	{
159	KeyOz	1689	pb_K1->setValue(ToolBox::Data2Int(RX.Decode, 0,true));
		1690	pb_K2->setValue(ToolBox::Data2Int(RX.Decode, 2,true));
		1691	pb_K3->setValue(ToolBox::Data2Int(RX.Decode, 4,true));
		1692	pb_K4->setValue(ToolBox::Data2Int(RX.Decode, 6,true));
		1693	pb_K5->setValue(ToolBox::Data2Int(RX.Decode, 8,true));
		1694	pb_K6->setValue(ToolBox::Data2Int(RX.Decode, 10,true));
		1695	pb_K7->setValue(ToolBox::Data2Int(RX.Decode, 12,true));
		1696	pb_K8->setValue(ToolBox::Data2Int(RX.Decode, 14,true));
158	KeyOz	1697	}
		1698	break;
159	KeyOz	1699	case 'A' : // DONE 0.71g
158	KeyOz	1700	if (ToolBox::Decode64(RX, true))
		1701	{
159	KeyOz	1702	int Position = RX.Decode[0];
158	KeyOz	1703	if (Position < 32)
		1704	{
162	KeyOz	1705	Settings->Analog1.Label[Position] = ToolBox::Data2QString(RX.Decode,1,17).trimmed();
158	KeyOz	1706	Position ++;
		1707	TX_Data[0] = Position;
159	KeyOz	1708	send_Data('a', ADDRESS_ALL, TX_Data, 1, false);
158	KeyOz	1709	}
		1710	if (Position == 32)
		1711	{
		1712	for (int a = 0; a < MaxAnalog; a++)
		1713	{
162	KeyOz	1714	lb_Analog[a]->setText(Settings->Analog1.Label[a]);
158	KeyOz	1715	}
162	KeyOz	1716	Settings->write_Settings_AnalogLabels(HardwareID);
158	KeyOz	1717	config_Plot();
		1718	}
		1719	}
		1720	break;
159	KeyOz	1721	case 'D' : // DONE 0.71g
158	KeyOz	1722	if (ToolBox::Decode64(RX, true))
		1723	{
		1724	for (int i = 0; i < MaxAnalog; i++)
		1725	{
		1726	AnalogData[i] = ToolBox::Data2Int(RX.Decode, (i * 2) + 2);
		1727	}
		1728	show_DebugData();
		1729	}
		1730	break;
159	KeyOz	1731	case 'Q' : // DONE 0.71g
158	KeyOz	1732	TickerEvent[0] = false;
		1733
		1734	ToolBox::Decode64(RX, true);
159	KeyOz	1735
		1736	if (RX.Decode[1] == VERSION_SETTINGS)
		1737	{
		1738	int Settings_ID = RX.Decode[0];
		1739	for (int a = 0; a < MaxParameter; a++)
		1740	{
		1741	ParameterSet[Settings_ID][a] = RX.Decode[a + 2];
		1742	}
		1743	// memcpy(ParameterSet[Settings_ID],RX.Decode, sizeof(RX.Decode));
		1744	show_ParameterSet(Settings_ID);
		1745	}
		1746	else
		1747	{
		1748	pb_Read->setDisabled(true);
		1749	pb_Write->setDisabled(true);
		1750
		1751	QMessageBox::warning(this, QA_NAME,
		1752	"Versionen inkompatibel. \nParameterbearbeitung nicht moeglich.", QMessageBox::Ok);
		1753	}
		1754
158	KeyOz	1755	break;
159	KeyOz	1756	case 'S' : // DONE 0.71g
158	KeyOz	1757	TickerEvent[0] = false;
159	KeyOz	1758	qDebug("Settings set...!!!");
		1759	break;
		1760	case 'V' : // DONE 0.71g
		1761	TickerEvent[0] = false;
158	KeyOz	1762
		1763	ToolBox::Decode64(RX, true);
		1764
159	KeyOz	1765	Mode.ID = RX.Input[1] - 'a';
		1766	Mode.VERSION_MAJOR = RX.Decode[0];
		1767	Mode.VERSION_MINOR = RX.Decode[1];
		1768	Mode.VERSION_PATCH = RX.Decode[4];
		1769	Mode.VERSION_SERIAL_MAJOR = RX.Decode[2];
		1770	Mode.VERSION_SERIAL_MINOR = RX.Decode[3];
		1771
158	KeyOz	1772	Mode.Hardware = HardwareType[Mode.ID];
		1773	Mode.Version = QString("%1").arg(RX.Decode[0]) + "." + QString("%1").arg(RX.Decode[1]) + QString(RX.Decode[4] + 'a');
		1774
		1775	setWindowTitle(QA_NAME + " v" + QA_VERSION + " - " + Mode.Hardware + " " + Mode.Version);
		1776
159	KeyOz	1777	if (Mode.VERSION_SERIAL_MAJOR != VERSION_SERIAL_MAJOR)
158	KeyOz	1778	{
159	KeyOz	1779	AllowSend = false;
		1780	QMessageBox::warning(this, QA_NAME,
		1781	"Serielles Protokoll Inkompatibel. \nBitte neue Programmversion installieren,", QMessageBox::Ok);
		1782	}
158	KeyOz	1783
159	KeyOz	1784	TX_Data[0] = 50;
		1785	send_Data('d', ADDRESS_ALL, TX_Data, 1, false);
		1786
		1787	if (Mode.ID == ADDRESS_FC)
		1788	{
158	KeyOz	1789	{
159	KeyOz	1790	TX_Data[0] = 0xff;
158	KeyOz	1791	TX_Data[1] = 0;
159	KeyOz	1792	send_Data('q', ADDRESS_FC, TX_Data, 1);
158	KeyOz	1793	}
		1794	}
		1795	else
		1796	{
		1797	pb_Read->setDisabled(true);
		1798	pb_Write->setDisabled(true);
		1799
159	KeyOz	1800	// QMessageBox::warning(this, QA_NAME,
		1801	// "Keine Verbindung zur FlightCtrl. \nParameterbearbeitung nicht moeglich.", QMessageBox::Ok);
158	KeyOz	1802	}
162	KeyOz	1803
		1804	Settings->read_Settings_AnalogLabels(HardwareID);
		1805	Settings->read_Settings_Analog(HardwareID);
		1806	for (int a = 0; a < MaxAnalog; a++)
		1807	{
		1808	lb_Analog[a]->setText(Settings->Analog1.Label[a]);
		1809	}
		1810	config_Plot();
		1811
158	KeyOz	1812	break;
		1813	}
		1814	}
		1815
		1816	// Neue Daten an der Schnittstelle
159	KeyOz	1817	void MKTool::slot_newDataReceived(const QByteArray &dataReceived) // DONE 0.71g
158	KeyOz	1818	{
		1819	const char *RXt;
		1820	RXt = dataReceived.data();
		1821	int a = 0;
		1822
		1823	while (RXt[a] != '\0')
		1824	{
		1825	if (RXt[a] == '\r')
		1826	{
		1827	while ((RxData.String.length() > 1) && (RxData.String.at(1) == '#'))
		1828	{
		1829	RxData.String.remove(0,1);
		1830	}
		1831
		1832	if (ToolBox::check_CRC(RxData.String))
		1833	{
		1834	RxData.Input = RxData.String.toLatin1().data();
		1835	new_RXData(RxData);
		1836
162	KeyOz	1837	if ((cb_ShowData->isChecked()) && ((tab_Main->currentWidget()->objectName() == QString("Tab_3")) \|\| (cb_ShowAlways->isChecked())))
158	KeyOz	1838	{
		1839	te_RX->moveCursor(QTextCursor::End, QTextCursor::MoveAnchor);
		1840	te_RX->insertPlainText(RxData.String + '\r');
		1841	}
		1842	}
		1843	else
		1844	{
162	KeyOz	1845	if ((cb_ShowMSG->isChecked()) && ((tab_Main->currentWidget()->objectName() == QString("Tab_3")) \|\| (cb_ShowAlways->isChecked())))
158	KeyOz	1846	{
		1847	te_RX->moveCursor(QTextCursor::End, QTextCursor::MoveAnchor);
		1848	te_RX->insertPlainText(RxData.String + '\r');
		1849	}
		1850	}
		1851	RxData.String = QString("");
		1852	}
		1853	else
		1854	{
		1855	{
		1856	RxData.String = RxData.String + QString(RXt[a]);
		1857	}
		1858	}
		1859	a++;
		1860	}
		1861	}
		1862
		1863	// Seriellen Port öffnen
		1864	void MKTool::slot_OpenPort()
		1865	{
		1866	if (serialPort->isOpen())
		1867	{
		1868	TX_Data[0] = 0;
		1869	TX_Data[1] = 0;
		1870	TX_Data[2] = 0;
		1871	TX_Data[3] = 0;
159	KeyOz	1872	send_Data('t', ADDRESS_FC, TX_Data, 4, false);
158	KeyOz	1873
		1874	serialPort->close();
		1875	pb_Open->setText("Verbinden");
		1876	ac_ConnectTTY->setText("Verbinden");
		1877	pb_Open->setIcon(Icons[9]);
		1878	ac_ConnectTTY->setIcon(Icons[9]);
		1879	}
		1880	else
		1881	{
		1882	serialPort->setPort(le_Port->text()); //Port
		1883
		1884	serialPort->setBaudRate(BAUD57600); //BaudRate
		1885	serialPort->setDataBits(DATA_8); //DataBits
		1886	serialPort->setParity(PAR_NONE); //Parity
		1887	serialPort->setStopBits(STOP_1); //StopBits
		1888	serialPort->setFlowControl(FLOW_OFF); //FlowControl
		1889
		1890	serialPort->setTimeout(0, 10);
		1891	serialPort->enableSending();
		1892	serialPort->enableReceiving();
		1893
		1894	serialPort->open();
		1895	if (serialPort->isOpen())
		1896	{
		1897	serialPort->receiveData();
		1898
159	KeyOz	1899	send_Data('v', ADDRESS_ALL, TX_Data, 0, true);
		1900
158	KeyOz	1901	pb_Open->setText("Trennen");
		1902	ac_ConnectTTY->setText("Trennen");
		1903	pb_Open->setIcon(Icons[8]);
		1904	ac_ConnectTTY->setIcon(Icons[8]);
		1905	}
		1906	}
		1907	}
		1908
		1909	// Daten senden
159	KeyOz	1910	void MKTool::send_Data(char CMD, int Address, char Data[150],unsigned int Length, bool Resend) // DONE 0.71g
158	KeyOz	1911	{
159	KeyOz	1912	if (serialPort->isOpen() && AllowSend)
158	KeyOz	1913	{
		1914	QString TX_Data = ToolBox::Encode64(Data, Length);
		1915
159	KeyOz	1916	TX_Data = QString("#") + (QString('a' + Address)) + QString(CMD) + TX_Data;
158	KeyOz	1917
		1918	// qDebug(TX_Data.toLatin1().data());
		1919
		1920	TX_Data = ToolBox::add_CRC(TX_Data) + '\r';
		1921
		1922	// qDebug(TX_Data.toLatin1().data());
		1923
		1924	if (Resend)
		1925	{
		1926	LastSend = TX_Data;
		1927	TickerEvent[0] = true;
		1928	}
		1929
		1930	QByteArray Temp(TX_Data.toUtf8());
		1931	serialPort->sendData(Temp);
		1932	}
		1933	}
		1934
		1935
		1936	// Programm beenden
		1937	///////////////////
162	KeyOz	1938
		1939	MKTool::~MKTool()
158	KeyOz	1940	{
162	KeyOz	1941	qDebug(" Programm Ende ..!! ");
158	KeyOz	1942	if (serialPort->isOpen())
		1943	{
		1944	serialPort->close();
		1945	}
		1946
		1947	write_Settings();
162	KeyOz	1948	Settings->write_Settings();
158	KeyOz	1949
		1950	if (CSVFile->isOpen())
		1951	{
		1952	CSVFile->close();
		1953	}
		1954
162	KeyOz	1955	// close();
158	KeyOz	1956	}
		1957

Subversion Repositories Projects

(root)/QMK-Groundstation/trunk/Forms/mktool.cpp @ 240 - Rev 162