Subversion Repositories MK3Mag

Rev

Rev 22 | Rev 26 | Go to most recent revision | Details | Compare with Previous | Last modification | View Log | RSS feed

Rev Author Line No. Line
12 hbuss 1
/*#######################################################################################
2
MK3Mag 3D-Magnet sensor
19 killagreg 3
!!! THIS IS NOT FREE SOFTWARE !!!
12 hbuss 4
#######################################################################################*/
5
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
6
// + Copyright (c) 05.2008 Holger Buss
7
// + Thanks to Ilja Fähnrich (P_Latzhalter)
1 ingob 8
// + Nur für den privaten Gebrauch
12 hbuss 9
// + www.MikroKopter.com
10
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
19 killagreg 11
// + Die Portierung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur
12 hbuss 12
// + mit unserer Zustimmung zulässig
13
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
19 killagreg 14
// + Es gilt für das gesamte Projekt (Hardware, Software, Binärfiles, Sourcecode und Dokumentation),
15
// + dass eine Nutzung (auch auszugsweise) nur für den privaten (nicht-kommerziellen) Gebrauch zulässig ist.
12 hbuss 16
// + AUSNAHME: Ein bei www.mikrokopter.de erworbener vorbestückter MK3Mag darf als Baugruppe auch in kommerziellen Systemen verbaut werden
17
// + Im Zweifelsfall bitte anfragen bei: info@mikrokopter.de
18
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
19 killagreg 19
// + Werden Teile des Quellcodes (mit oder ohne Modifikation) weiterverwendet oder veröffentlicht,
12 hbuss 20
// + unterliegen sie auch diesen Nutzungsbedingungen und diese Nutzungsbedingungen incl. Copyright müssen dann beiliegen
21
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
22
// + Sollte die Software (auch auszugesweise) oder sonstige Informationen des MikroKopter-Projekts
23
// + auf anderen Webseiten oder sonstigen Medien veröffentlicht werden, muss unsere Webseite "http://www.mikrokopter.de"
24
// + eindeutig als Ursprung verlinkt werden
25
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
26
// + Keine Gewähr auf Fehlerfreiheit, Vollständigkeit oder Funktion
27
// + Benutzung auf eigene Gefahr
28
// + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden
29
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
30
// + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen
31
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
19 killagreg 32
// + Redistributions of source code (with or without modifications) must retain the above copyright notice,
12 hbuss 33
// + this list of conditions and the following disclaimer.
34
// +   * PORTING this software (or parts of it) to systems (other than hardware from www.mikrokopter.de) is NOT allowed
35
// +   * Neither the name of the copyright holders nor the names of contributors may be used to endorse or promote products derived
36
// +     from this software without specific prior written permission.
19 killagreg 37
// +   * The use of this project (hardware, software, binary files, sources and documentation) is only permittet
12 hbuss 38
// +     for non-commercial use (directly or indirectly)
19 killagreg 39
// +     Commercial use (for excample: selling of MikroKopters, selling of PCBs, assembly, ...) is only permitted
12 hbuss 40
// +     with our written permission
41
// +     Exception: A preassembled MK3Mag, purchased from www.mikrokopter.de may be used as a part of commercial systems
42
// +     In case of doubt please contact: info@MikroKopter.de
19 killagreg 43
// +   * If sources or documentations are redistributet on other webpages, our webpage (http://www.MikroKopter.de) must be
44
// +     clearly linked as origin
12 hbuss 45
// +  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
46
// +  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
47
// +  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
48
// +  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
49
// +  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
50
// +  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
51
// +  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
52
// +  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
53
// +  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
54
// +  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
19 killagreg 55
// +  POSSIBILITY OF SUCH DAMAGE.
12 hbuss 56
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
19 killagreg 57
#include <avr/io.h>
58
#include <avr/interrupt.h>
59
#include <avr/wdt.h>
1 ingob 60
#include "main.h"
61
#include "uart.h"
19 killagreg 62
#include "timer0.h"
63
#include "twislave.h"
1 ingob 64
 
65
 
19 killagreg 66
#define FALSE   0
67
#define TRUE    1
1 ingob 68
 
23 killagreg 69
#define TXD_BUFFER_LEN  100
70
#define RXD_BUFFER_LEN  100
1 ingob 71
 
19 killagreg 72
volatile uint8_t txd_buffer[TXD_BUFFER_LEN];
73
volatile uint8_t rxd_buffer_locked = FALSE;
74
volatile uint8_t rxd_buffer[RXD_BUFFER_LEN];
75
volatile uint8_t txd_complete = TRUE;
76
volatile uint8_t ReceivedBytes = 0;
1 ingob 77
 
23 killagreg 78
#define VERSION_INFO    0x01
79
#define DEBUG_DATA              0x02
80
#define DEBUG_LABEL             0x04
81
#define COMPASS_HEADING 0x08
21 killagreg 82
 
23 killagreg 83
uint8_t RequestFlags = 0x00;
84
uint8_t RequestDebugLabel = 0;
21 killagreg 85
 
3 ingob 86
 
19 killagreg 87
uint8_t MySlaveAddr = 0;
1 ingob 88
 
19 killagreg 89
 
23 killagreg 90
struct DebugOut_t               DebugOut;
91
struct ExternData_t             ExternData;
92
struct ExternControl_t  ExternControl;
93
struct VersionInfo_t    VersionInfo;
19 killagreg 94
 
95
uint16_t  Debug_Timer;
96
 
97
const uint8_t ANALOG_LABEL[32][16] =
1 ingob 98
{
7 hbuss 99
   //1234567890123456
19 killagreg 100
    "Magnet X        ", //0
101
    "Magnet Y        ",
7 hbuss 102
    "Magnet Z        ",
19 killagreg 103
    "Raw X           ",
104
    "Raw Y           ",
105
    "Raw Z           ", //5
106
    "Attitude Nick   ",
107
    "Attitude Roll   ",
108
    "XOffset         ",
109
    "XRange          ",
110
    "YOffset         ", //10
111
    "YRange          ",
112
    "ZOffset         ",
113
    "ZRange          ",
7 hbuss 114
    "Calstate        ",
21 killagreg 115
    "Heading         ", //15
5 hbuss 116
    "User0           ",
117
    "User1           ",
7 hbuss 118
    "Analog18        ",
119
    "Analog19        ",
120
    "Analog20        ", //20
19 killagreg 121
    "Analog21        ",
7 hbuss 122
    "Analog22        ",
123
    "Analog23        ",
124
    "Analog24        ",
125
    "Analog25        ", //25
1 ingob 126
    "Analog26        ",
7 hbuss 127
    "Analog27        ",
128
    "Analog28        ",
129
    "Analog29        ",
130
    "Analog30        ", //30
131
    "Analog31        "
1 ingob 132
};
133
 
134
 
19 killagreg 135
/****************************************************************/
136
/*              Initialization of the USART0                    */
137
/****************************************************************/
138
void USART0_Init (void)
139
{
140
        uint16_t ubrr = (uint16_t) ((uint32_t) SYSCLK/(8 * BAUD_RATE) - 1);
141
 
142
        // disable all interrupts before configuration
143
        cli();
144
 
145
        // disable RX-Interrupt
146
        UCSR0B &= ~(1 << RXCIE0);
147
        // disable TX-Interrupt
148
        UCSR0B &= ~(1 << TXCIE0);
149
 
150
        // set direction of RXD0 and TXD0 pins
151
 
22 killagreg 152
        // set RXD0 (PD0) as an input pin tristate
19 killagreg 153
        DDRD  &= ~(1 << DDD0);
22 killagreg 154
        PORTD &= ~(1 << PORTD0);
19 killagreg 155
        // set TXD0 (PD1) as an output pin
156
        DDRD  |= (1 << DDD1);
22 killagreg 157
        PORTD &= ~(1 << PORTD1);
19 killagreg 158
 
22 killagreg 159
 
19 killagreg 160
        // USART0 Baud Rate Register
161
        // set clock divider
162
        UBRR0H = (uint8_t)(ubrr >> 8);
163
        UBRR0L = (uint8_t)ubrr;
164
 
165
        // USART0 Control and Status Register A, B, C
166
 
21 killagreg 167
        // enable double speed operation
19 killagreg 168
        UCSR0A |= (1 << U2X0);
22 killagreg 169
 
19 killagreg 170
        // set asynchronous mode
171
        UCSR0C &= ~(1 << UMSEL01);
172
        UCSR0C &= ~(1 << UMSEL00);
173
        // no parity
174
        UCSR0C &= ~(1 << UPM01);
175
        UCSR0C &= ~(1 << UPM00);
176
        // 1 stop bit
177
        UCSR0C &= ~(1 << USBS0);
178
        // 8-bit
179
        UCSR0B &= ~(1 << UCSZ02);
180
        UCSR0C |=  (1 << UCSZ01);
181
        UCSR0C |=  (1 << UCSZ00);
182
 
22 killagreg 183
        // enable receiver and transmitter
184
        UCSR0B |= (1 << RXEN0);
185
        UCSR0B |= (1 << TXEN0);
186
 
19 killagreg 187
        // flush receive buffer
188
        while ( UCSR0A & (1<<RXC0) ) UDR0;
189
 
190
        // enable RX-Interrupt
191
        UCSR0B |= (1 << RXCIE0);
192
        // enable TX-Interrupt
193
        UCSR0B |= (1 << TXCIE0);
194
 
195
        rxd_buffer_locked = FALSE;
196
        txd_complete = TRUE;
197
 
198
 
199
        VersionInfo.Major = VERSION_MAJOR;
200
        VersionInfo.Minor = VERSION_MINOR;
201
    VersionInfo.PCCompatible = VERSION_COMPATIBLE;
202
 
22 killagreg 203
 
204
    // Version beim Start ausgeben (nicht schön, aber geht... )
205
        uart_putchar ('\n');
206
        uart_putchar ('C');
207
        uart_putchar ('P');
208
        uart_putchar (':');
209
        uart_putchar ('V');
210
        uart_putchar (0x30 + VERSION_MAJOR);
211
        uart_putchar ('.');uart_putchar (0x30 + VERSION_MINOR/10);
212
        uart_putchar (0x30 + VERSION_MINOR%10);
19 killagreg 213
    uart_putchar ('\n');
214
}
215
 
216
// ---------------------------------------------------------------------------------
217
void USART0_EnableTXD(void)
1 ingob 218
{
22 killagreg 219
        DDRD |= (1<<DDD1);                      // set TXD pin as output
220
        PORTD &= ~(1 << PORTD1);
19 killagreg 221
        UCSR0B |= (1 << TXEN0);         // enable TX in USART
22 killagreg 222
        UCSR0B |= (1 << TXCIE0);        // disable TX-Interrupt
1 ingob 223
}
224
 
19 killagreg 225
// ---------------------------------------------------------------------------------
226
void USART0_DisableTXD(void)
1 ingob 227
{
21 killagreg 228
        while(!txd_complete){ };
229
 
22 killagreg 230
        UCSR0B &= ~(1 << TXCIE0);   // disable TX-Interrupt
19 killagreg 231
        UCSR0B &= ~(1 << TXEN0);        // disable TXD in USART
232
        DDRD &= ~(1<<DDD1);             // set TXD pin as input
22 killagreg 233
        PORTD &= ~(1 << PORTD1);
1 ingob 234
}
235
 
19 killagreg 236
/****************************************************************/
237
/*               USART0 transmitter ISR                         */
238
/****************************************************************/
239
ISR(USART_TX_vect)
1 ingob 240
{
19 killagreg 241
        static uint16_t ptr_txd_buffer = 0;
242
        uint8_t tmp_tx;
243
        if(!txd_complete) // transmission not completed
244
        {
245
                ptr_txd_buffer++;                    // die [0] wurde schon gesendet
246
                tmp_tx = txd_buffer[ptr_txd_buffer];
247
                // if terminating character or end of txd buffer was reached
248
                if((tmp_tx == '\r') || (ptr_txd_buffer == TXD_BUFFER_LEN))
249
                {
250
                        ptr_txd_buffer = 0; // reset txd pointer
21 killagreg 251
                        txd_complete = TRUE; // stop transmission
19 killagreg 252
                }
253
                UDR0 = tmp_tx; // send current byte will trigger this ISR again
254
        }
255
        // transmission completed
256
        else ptr_txd_buffer = 0;
257
}
1 ingob 258
 
19 killagreg 259
/****************************************************************/
260
/*               USART0 receiver ISR                            */
261
/****************************************************************/
262
ISR(USART_RX_vect)
263
{
264
        static uint16_t crc;
265
        uint8_t crc1, crc2;
266
        uint8_t c;
21 killagreg 267
        static uint8_t ptr_rxd_buffer = 0;
1 ingob 268
 
19 killagreg 269
        c = UDR0;  // catch the received byte
1 ingob 270
 
19 killagreg 271
        if(rxd_buffer_locked) return; // if rxd buffer is locked immediately return
272
 
273
        // the rxd buffer is unlocked
274
        if((ptr_rxd_buffer == 0) && (c == '#')) // if rxd buffer is empty and syncronisation character is received
275
        {
276
                rxd_buffer[ptr_rxd_buffer++] = c; // copy 1st byte to buffer
277
                crc = c; // init crc
278
        }
279
        #if 0
280
        else if (ptr_rxd_buffer == 1) // handle address
281
        {
282
                rxd_buffer[ptr_rxd_buffer++] = c; // copy byte to rxd buffer
283
                crc += c; // update crc
284
        }
285
        #endif
286
        else if (ptr_rxd_buffer < RXD_BUFFER_LEN) // collect incomming bytes
287
        {
288
                if(c != '\r') // no termination character
289
                {
290
                        rxd_buffer[ptr_rxd_buffer++] = c; // copy byte to rxd buffer
291
                        crc += c; // update crc
292
                }
293
                else // termination character was received
294
                {
295
                        // the last 2 bytes are no subject for checksum calculation
296
                        // they are the checksum itself
297
                        crc -= rxd_buffer[ptr_rxd_buffer-2];
298
                        crc -= rxd_buffer[ptr_rxd_buffer-1];
299
                        // calculate checksum from transmitted data
300
                        crc %= 4096;
301
                        crc1 = '=' + crc / 64;
302
                        crc2 = '=' + crc % 64;
303
                        // compare checksum to transmitted checksum bytes
304
                        if((crc1 == rxd_buffer[ptr_rxd_buffer-2]) && (crc2 == rxd_buffer[ptr_rxd_buffer-1]))
305
                        {   // checksum valid
306
                                rxd_buffer_locked = TRUE;          // lock the rxd buffer
307
                                ReceivedBytes = ptr_rxd_buffer;    // store number of received bytes
308
                                rxd_buffer[ptr_rxd_buffer] = '\r'; // set termination character
309
                                // if 2nd byte is an 'R' enable watchdog that will result in an reset
310
                                if(rxd_buffer[2] == 'R') {wdt_enable(WDTO_250MS);} // Reset-Commando
311
                        }
312
                        else
313
                        {       // checksum invalid
314
                                rxd_buffer_locked = FALSE; // unlock rxd buffer
315
                        }
316
                        ptr_rxd_buffer = 0; // reset rxd buffer pointer
317
                }
318
        }
319
        else // rxd buffer overrun
320
        {
321
                ptr_rxd_buffer = 0; // reset rxd buffer
322
                rxd_buffer_locked = FALSE; // unlock rxd buffer
323
        }
1 ingob 324
}
325
 
326
 
19 killagreg 327
// --------------------------------------------------------------------------
328
void AddCRC(uint16_t datalen)
1 ingob 329
{
19 killagreg 330
        uint16_t tmpCRC = 0, i;
331
        for(i = 0; i < datalen; i++)
332
        {
333
                tmpCRC += txd_buffer[i];
334
        }
335
        tmpCRC %= 4096;
336
        txd_buffer[i++] = '=' + tmpCRC / 64;
337
        txd_buffer[i++] = '=' + tmpCRC % 64;
338
        txd_buffer[i++] = '\r';
339
        txd_complete = FALSE;
340
        UDR0 = txd_buffer[0]; // initiates the transmission (continued in the TXD ISR)
341
}
1 ingob 342
 
343
 
344
 
345
// --------------------------------------------------------------------------
19 killagreg 346
void SendOutData(uint8_t cmd,uint8_t module, uint8_t *snd, uint8_t len)
1 ingob 347
{
19 killagreg 348
        uint16_t pt = 0;
349
        uint8_t a,b,c;
350
        uint8_t ptr = 0;
351
 
352
        txd_buffer[pt++] = '#';         // Start character
353
        txd_buffer[pt++] = module;      // Address (a=0; b=1,...)
354
        txd_buffer[pt++] = cmd;         // Command
355
 
356
        while(len)
357
        {
358
                if(len) { a = snd[ptr++]; len--;} else a = 0;
359
                if(len) { b = snd[ptr++]; len--;} else b = 0;
360
                if(len) { c = snd[ptr++]; len--;} else c = 0;
361
                txd_buffer[pt++] = '=' + (a >> 2);
362
                txd_buffer[pt++] = '=' + (((a & 0x03) << 4) | ((b & 0xf0) >> 4));
363
                txd_buffer[pt++] = '=' + (((b & 0x0f) << 2) | ((c & 0xc0) >> 6));
364
                txd_buffer[pt++] = '=' + ( c & 0x3f);
365
        }
366
        AddCRC(pt); // add checksum after data block and initates the transmission
1 ingob 367
}
368
 
369
 
370
// --------------------------------------------------------------------------
19 killagreg 371
void Decode64(uint8_t *ptrOut, uint8_t len, uint8_t ptrIn, uint8_t max)
1 ingob 372
{
19 killagreg 373
        uint8_t a,b,c,d;
374
        uint8_t ptr = 0;
375
        uint8_t x,y,z;
376
        while(len)
377
        {
378
                a = rxd_buffer[ptrIn++] - '=';
379
                b = rxd_buffer[ptrIn++] - '=';
380
                c = rxd_buffer[ptrIn++] - '=';
381
                d = rxd_buffer[ptrIn++] - '=';
382
                if(ptrIn > max - 2) break;
1 ingob 383
 
19 killagreg 384
                x = (a << 2) | (b >> 4);
385
                y = ((b & 0x0f) << 4) | (c >> 2);
386
                z = ((c & 0x03) << 6) | d;
387
 
388
                if(len--) ptrOut[ptr++] = x; else break;
389
                if(len--) ptrOut[ptr++] = y; else break;
390
                if(len--) ptrOut[ptr++] = z; else break;
391
        }
1 ingob 392
}
393
 
394
 
19 killagreg 395
// --------------------------------------------------------------------------
21 killagreg 396
int uart_putchar (int8_t c)
1 ingob 397
{
19 killagreg 398
        // if tx is not enabled return immediatly
399
        if(!(UCSR0B & (1 << TXEN0))) return (0);
400
        if (c == '\n') uart_putchar('\r');
401
        // wait until previous character was send
402
        loop_until_bit_is_set(UCSR0A, UDRE0);
403
        // send character
404
        UDR0 = c;
1 ingob 405
        return (0);
406
}
407
 
19 killagreg 408
 
1 ingob 409
// --------------------------------------------------------------------------
19 killagreg 410
void USART0_ProcessRxData(void)
1 ingob 411
{
19 killagreg 412
        // if data in the rxd buffer are not locked immediately return
413
        if(!rxd_buffer_locked) return;
1 ingob 414
 
19 killagreg 415
        uint8_t tmp_char_arr2[2]; // local char buffer
1 ingob 416
 
19 killagreg 417
        switch(rxd_buffer[2])
418
        {
419
           case 'w':// Attitude
420
                        Decode64((uint8_t *) &ExternData, sizeof(ExternData), 3, ReceivedBytes);
23 killagreg 421
                        RequestFlags |= COMPASS_HEADING;
19 killagreg 422
                        break;
1 ingob 423
 
19 killagreg 424
                case 'b': // extern control
425
                case 'c': // extern control with debug request
426
                        Decode64((uint8_t *) &ExternControl,sizeof(ExternControl), 3,ReceivedBytes);
21 killagreg 427
                        #define KEY1    0x01
428
                        #define KEY2    0x02
429
                        #define KEY3    0x04
430
                        #define KEY4    0x08
431
                        #define KEY5    0x10
432
                        // use right arrow at display for switching the calstate
433
                        if(ExternControl.RemoteButtons & KEY2)
434
                        {
435
                                ExternData.CalState++;
436
                                if(ExternData.CalState == 6) ExternData.CalState = 0;
437
                        }
19 killagreg 438
                        ExternData.Attitude[0] = ExternControl.Par1;
439
            ExternData.Attitude[1] = ExternControl.Par2;
21 killagreg 440
            PC_Connected = 255;
19 killagreg 441
                        break;
1 ingob 442
 
19 killagreg 443
                case 'h':// x-1 display columns
444
                        PC_Connected = 255;
445
                        break;
1 ingob 446
 
19 killagreg 447
                case 'v': // get version and board release
23 killagreg 448
                        RequestFlags |= VERSION_INFO;
19 killagreg 449
                        PC_Connected = 255;
450
                        break;
451
 
452
                case 'a':// Labels of the Analog Debug outputs
453
                        Decode64((uint8_t *) &tmp_char_arr2[0], sizeof(tmp_char_arr2), 3, ReceivedBytes);
454
                        RequestDebugLabel = tmp_char_arr2[0];
23 killagreg 455
                        RequestFlags |= DEBUG_LABEL;
19 killagreg 456
                        PC_Connected = 255;
457
                        break;
458
 
459
                case 'g':// get debug data
23 killagreg 460
                        RequestFlags |= DEBUG_DATA;
19 killagreg 461
                        PC_Connected = 255;
462
                        break;
463
        }
464
        // unlock the rxd buffer after processing
465
        rxd_buffer_locked = FALSE;
1 ingob 466
}
467
 
468
 
19 killagreg 469
 
470
//---------------------------------------------------------------------------------------------
471
void USART0_TransmitTxData(void)
1 ingob 472
{
19 killagreg 473
        if(!(UCSR0B & (1 << TXEN0))) return;
1 ingob 474
 
19 killagreg 475
        if(!txd_complete) return;
1 ingob 476
 
23 killagreg 477
    if(CheckDelay(Debug_Timer))
19 killagreg 478
    {
479
                SetDebugValues();
480
                SendOutData('D',MySlaveAddr,(uint8_t *) &DebugOut,sizeof(DebugOut));
481
                Debug_Timer = SetDelay(250);
482
    }
1 ingob 483
 
23 killagreg 484
    if(RequestFlags & DEBUG_LABEL)
19 killagreg 485
    {
486
                SendOutData('A',RequestDebugLabel + '0',(uint8_t *) ANALOG_LABEL[RequestDebugLabel],16);
487
                RequestDebugLabel = 255;
23 killagreg 488
                RequestFlags &= ~DEBUG_LABEL;
19 killagreg 489
        }
1 ingob 490
 
23 killagreg 491
        if(RequestFlags & VERSION_INFO)
19 killagreg 492
    {
493
                SendOutData('V',MySlaveAddr,(uint8_t *) &VersionInfo, sizeof(VersionInfo));
23 killagreg 494
                RequestFlags &= ~VERSION_INFO;
19 killagreg 495
    }
496
 
23 killagreg 497
        if(RequestFlags & DEBUG_DATA)
19 killagreg 498
        {
499
                SetDebugValues();
500
                SendOutData('G',MySlaveAddr,(uint8_t *) &ExternControl,sizeof(ExternControl));
23 killagreg 501
                RequestFlags &= ~DEBUG_DATA;
19 killagreg 502
        }
503
 
23 killagreg 504
    if(RequestFlags & COMPASS_HEADING)
19 killagreg 505
        {
506
                SendOutData('K',MySlaveAddr,(uint8_t *) &I2C_Heading, sizeof(I2C_Heading));
23 killagreg 507
                RequestFlags &= ~COMPASS_HEADING;
19 killagreg 508
        }
1 ingob 509
}