Subversion Repositories MK3Mag

Rev

Rev 26 | Rev 28 | Go to most recent revision | Details | Compare with Previous | Last modification | View Log | RSS feed

Rev Author Line No. Line
12 hbuss 1
/*#######################################################################################
2
MK3Mag 3D-Magnet sensor
19 killagreg 3
!!! THIS IS NOT FREE SOFTWARE !!!
12 hbuss 4
#######################################################################################*/
5
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
6
// + Copyright (c) 05.2008 Holger Buss
7
// + Thanks to Ilja Fähnrich (P_Latzhalter)
8
// + Nur für den privaten Gebrauch
9
// + www.MikroKopter.com
10
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
19 killagreg 11
// + Die Portierung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur
12 hbuss 12
// + mit unserer Zustimmung zulässig
13
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
19 killagreg 14
// + Es gilt für das gesamte Projekt (Hardware, Software, Binärfiles, Sourcecode und Dokumentation),
15
// + dass eine Nutzung (auch auszugsweise) nur für den privaten (nicht-kommerziellen) Gebrauch zulässig ist.
12 hbuss 16
// + AUSNAHME: Ein bei www.mikrokopter.de erworbener vorbestückter MK3Mag darf als Baugruppe auch in kommerziellen Systemen verbaut werden
17
// + Im Zweifelsfall bitte anfragen bei: info@mikrokopter.de
18
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
19 killagreg 19
// + Werden Teile des Quellcodes (mit oder ohne Modifikation) weiterverwendet oder veröffentlicht,
12 hbuss 20
// + unterliegen sie auch diesen Nutzungsbedingungen und diese Nutzungsbedingungen incl. Copyright müssen dann beiliegen
21
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
22
// + Sollte die Software (auch auszugesweise) oder sonstige Informationen des MikroKopter-Projekts
23
// + auf anderen Webseiten oder sonstigen Medien veröffentlicht werden, muss unsere Webseite "http://www.mikrokopter.de"
24
// + eindeutig als Ursprung verlinkt werden
25
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
26
// + Keine Gewähr auf Fehlerfreiheit, Vollständigkeit oder Funktion
27
// + Benutzung auf eigene Gefahr
28
// + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden
29
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
30
// + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen
31
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
19 killagreg 32
// + Redistributions of source code (with or without modifications) must retain the above copyright notice,
12 hbuss 33
// + this list of conditions and the following disclaimer.
34
// +   * PORTING this software (or parts of it) to systems (other than hardware from www.mikrokopter.de) is NOT allowed
35
// +   * Neither the name of the copyright holders nor the names of contributors may be used to endorse or promote products derived
36
// +     from this software without specific prior written permission.
19 killagreg 37
// +   * The use of this project (hardware, software, binary files, sources and documentation) is only permittet
12 hbuss 38
// +     for non-commercial use (directly or indirectly)
19 killagreg 39
// +     Commercial use (for excample: selling of MikroKopters, selling of PCBs, assembly, ...) is only permitted
12 hbuss 40
// +     with our written permission
41
// +     Exception: A preassembled MK3Mag, purchased from www.mikrokopter.de may be used as a part of commercial systems
42
// +     In case of doubt please contact: info@MikroKopter.de
19 killagreg 43
// +   * If sources or documentations are redistributet on other webpages, our webpage (http://www.MikroKopter.de) must be
44
// +     clearly linked as origin
12 hbuss 45
// +  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
46
// +  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
47
// +  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
48
// +  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
49
// +  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
50
// +  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
51
// +  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
52
// +  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
53
// +  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
54
// +  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
19 killagreg 55
// +  POSSIBILITY OF SUCH DAMAGE.
12 hbuss 56
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 ingob 57
#include <avr/io.h>
19 killagreg 58
#include <avr/interrupt.h>
1 ingob 59
#include <util/twi.h>
19 killagreg 60
#include "twislave.h"
61
#include "uart.h"
1 ingob 62
#include "main.h"
19 killagreg 63
#include "timer0.h"
22 killagreg 64
#include "led.h"
1 ingob 65
 
66
 
23 killagreg 67
volatile uint8_t I2C_RxBufferSize = 0, I2C_TxBufferSize = 0;
68
volatile uint8_t *I2C_TxBuffer = 0, *I2C_RxBuffer = 0;
69
volatile uint8_t Tx_Idx = 0, Rx_Idx = 0;
3 ingob 70
 
26 killagreg 71
volatile uint8_t I2C_PrimRxBuffer[10];
3 ingob 72
 
23 killagreg 73
struct I2C_Heading_t       I2C_Heading;
74
struct I2C_WriteAttitude_t I2C_WriteAttitude;
75
struct I2C_Mag_t           I2C_Mag;
76
struct I2C_Version_t       I2C_Version;
77
struct I2C_WriteCal_t      I2C_WriteCal;
19 killagreg 78
 
79
 
80
void I2C_Init(void)
81
{
22 killagreg 82
 
83
        uint8_t sreg;
84
 
85
        // backup status register
86
        sreg = SREG;
87
    // disable global interrupts
19 killagreg 88
        cli();
89
 
22 killagreg 90
        // SCK/SCL and  MISO/SDA are at put together on the same connector pin in the schematic
19 killagreg 91
 
23 killagreg 92
        // set PB4 (SCK) and PB5 (MISO) as input pull up
19 killagreg 93
        DDRB &= ~((1<<DDB4)|(1<<DDB5));
23 killagreg 94
        PORTB |= ((1<<PORTB4)|(1<<PORTB5));
19 killagreg 95
 
22 killagreg 96
        // set PC4 (SDA) and PC5 (SCL) as input tristate
19 killagreg 97
        DDRC &= ~((1<<DDC4)|(1<<DDC5));
22 killagreg 98
        PORTC &= ~((1<<PORTC4)|(1<<PORTC5));
19 killagreg 99
 
22 killagreg 100
        I2C_TxBuffer = 0;
101
        Tx_Idx = 0;
102
        I2C_TxBufferSize = 0;
103
        I2C_RxBuffer = 0;
104
        Rx_Idx = 0;
105
        I2C_RxBufferSize = 0;
106
 
107
 
108
 
109
        TWCR &= ~(1<<TWSTA)|(1<<TWSTO);
110
        TWCR|= (1<<TWEA) | (1<<TWEN)|(1<<TWIE);
111
 
112
        // set own address
113
        // set own address in the upper 7 bits
114
    TWAR = I2C_SLAVE_ADDRESS; // set own address only the upper 7 bits are relevant
19 killagreg 115
        // TWI Control Register
116
        // enable TWI Acknowledge Bit (TWEA = 1)
117
        // disable TWI START Condition Bit (TWSTA = 0), SLAVE
22 killagreg 118
        // disable TWI  STOP Condition Bit (TWSTO = 0), SLAVE
119
        // enable TWI (TWEN = 1)
19 killagreg 120
        // enable TWI Interrupt (TWIE = 1)
23 killagreg 121
        TWCR |= (1<<TWEN)|(1<<TWIE)|(1<<TWINT)|(1<<TWEA)|(0<<TWSTA)|(1<<TWSTO)|(0<<TWWC);
19 killagreg 122
        // update version info
123
        I2C_Version.Major = VERSION_MAJOR;
124
        I2C_Version.Minor = VERSION_MINOR;
125
        I2C_Version.Compatible = I2C_PROTOCOL_COMP;
126
 
22 killagreg 127
        // resore status register
19 killagreg 128
        SREG = sreg;
1 ingob 129
}
19 killagreg 130
 
22 killagreg 131
// send ACK after recieving a byte / ACK is expected after transmitting a byte
23 killagreg 132
#define TWCR_ACK TWCR           = (1<<TWEN)|(1<<TWIE)|(1<<TWINT)|(1<<TWEA)|(0<<TWSTA)|(0<<TWSTO)|(0<<TWWC)
22 killagreg 133
// send no ACK after recieving a byte / No ACK is expected after transmitting a byte
23 killagreg 134
#define TWCR_NACK TWCR          = (1<<TWEN)|(1<<TWIE)|(1<<TWINT)|(0<<TWEA)|(0<<TWSTA)|(0<<TWSTO)|(0<<TWWC)
22 killagreg 135
// switched to the non adressed slave mode
23 killagreg 136
#define TWCR_RESET TWCR         = (1<<TWEN)|(1<<TWIE)|(1<<TWINT)|(1<<TWEA)|(0<<TWSTA)|(0<<TWSTO)|(0<<TWWC)
22 killagreg 137
// The bit pattern for TWCR_ACK and TWCR_RESET are equal. This is no errro but used for better understanding.
23 killagreg 138
#define TWCR_CLEARBUS TWCR      = (1<<TWEN)|(1<<TWIE)|(1<<TWINT)|(1<<TWEA)|(0<<TWSTA)|(1<<TWSTO)|(0<<TWWC)
19 killagreg 139
 
1 ingob 140
ISR (TWI_vect)
19 killagreg 141
{
22 killagreg 142
        uint8_t data;
25 killagreg 143
        static uint8_t crc;
19 killagreg 144
        // check event
22 killagreg 145
        switch (TW_STATUS)
19 killagreg 146
        {
22 killagreg 147
        case TW_SR_SLA_ACK: // slave addressed in receiver mode and ack has been returned
148
            Rx_Idx = 0xFF;  // reset rx buffer pointer
149
                        TWCR_ACK;       // trigger receiving of first data byte and send ack afterwards
1 ingob 150
            return;
19 killagreg 151
 
22 killagreg 152
        case TW_SR_DATA_ACK: // data has been received and ack has been returned
153
                data = TWDR;
154
                        if (Rx_Idx  == 0xFF)
155
                        {       // if the fisrt byte after slave addressing was received
156
                                switch(data)
19 killagreg 157
                                {
158
                                        case I2C_CMD_VERSION:
159
                                                I2C_TxBuffer = (uint8_t *)&I2C_Version;
3 ingob 160
                                                I2C_TxBufferSize = sizeof(I2C_Version);
23 killagreg 161
                                                I2C_RxBuffer = 0;
3 ingob 162
                                                I2C_RxBufferSize = 0;
19 killagreg 163
                                                break;
164
 
165
                                        case I2C_CMD_WRITE_CAL:
23 killagreg 166
                                                I2C_TxBuffer = 0;
7 hbuss 167
                                                I2C_TxBufferSize = 0;
19 killagreg 168
                                                I2C_RxBuffer = (uint8_t *)&I2C_WriteCal;
7 hbuss 169
                                                I2C_RxBufferSize = sizeof(I2C_WriteCal);
19 killagreg 170
                                                break;
7 hbuss 171
 
19 killagreg 172
                                        case I2C_CMD_READ_MAG:
173
                                                I2C_TxBuffer = (uint8_t *)&I2C_Mag;
3 ingob 174
                                                I2C_TxBufferSize = sizeof(I2C_Mag);
23 killagreg 175
                                                I2C_RxBuffer = 0;
3 ingob 176
                                                I2C_RxBufferSize = 0;
19 killagreg 177
 
178
                                                I2C_Mag.MagX = MagnetX;
179
                                                I2C_Mag.MagY = MagnetY;
3 ingob 180
                                                I2C_Mag.MagZ = MagnetZ;
19 killagreg 181
                                                break;
182
 
183
                                        case I2C_CMD_READ_HEADING:
184
                                                I2C_TxBuffer = (uint8_t *)&I2C_Heading;
3 ingob 185
                                                I2C_TxBufferSize = sizeof(I2C_Heading);
19 killagreg 186
                                                I2C_RxBuffer =  (uint8_t *)&I2C_WriteAttitude;
187
                                                I2C_RxBufferSize = sizeof(I2C_WriteAttitude);
3 ingob 188
                                                I2C_Heading.Heading = Heading;
19 killagreg 189
                                                break;
23 killagreg 190
                                        default: // unknown command id
22 killagreg 191
                                                I2C_RxBuffer = 0;
192
                                                I2C_RxBufferSize = 0;
193
                                                I2C_TxBuffer = 0;
194
                                                I2C_TxBufferSize = 0;
195
                                        break;
19 killagreg 196
                                }
22 killagreg 197
                                Rx_Idx = 0; // set rx buffer index to start of the buffer
25 killagreg 198
                                crc = data;
3 ingob 199
                        }
22 killagreg 200
                        else // Rx_Idx  != 0xFF
3 ingob 201
                        {
23 killagreg 202
                                // fill receiver buffer with the byte that has been received
203
                                // if buffer exist and there is still some free space
26 killagreg 204
                                if(Rx_Idx  < I2C_RxBufferSize)
23 killagreg 205
                                {
26 killagreg 206
                                        I2C_PrimRxBuffer[Rx_Idx] = data;
25 killagreg 207
                                        crc += data;
22 killagreg 208
                                }
26 killagreg 209
                                else if (Rx_Idx == I2C_RxBufferSize) // crc byte was transfered
210
                                {       // if checksum matched
25 killagreg 211
                                        if(crc == data)
26 killagreg 212
                                        {   // and RxBuffer exist
213
                                                if(I2C_RxBuffer != 0)
214
                                                {       // copy data to rx buffer
215
                                                        for(data = 0; data < I2C_RxBufferSize; data++)
216
                                                        {
217
                                                                I2C_RxBuffer[data] = I2C_PrimRxBuffer[data];
218
                                                        }
219
                                                }
220
                                                DebugOut.Analog[31]++;
221
                                        }
222
                                        else
25 killagreg 223
                                        {
26 killagreg 224
                                                DebugOut.Analog[30]++;
25 killagreg 225
                                        }
226
                                }
227
                                // else ignore data
228
                                Rx_Idx++;
3 ingob 229
                        }
23 killagreg 230
                        TWCR_ACK;
1 ingob 231
            return;
19 killagreg 232
 
23 killagreg 233
        case TW_ST_SLA_ACK: // slave transmitter selected
234
                // reset index  to start of tx buffer
235
            Tx_Idx = 0;
25 killagreg 236
            crc = 0;
237
            // if tx buffer exist and there is at least one byte to transfer
23 killagreg 238
                        if((I2C_TxBuffer != 0) && (I2C_TxBufferSize > 1))
239
                        {
25 killagreg 240
                                data = I2C_TxBuffer[Tx_Idx];
241
 
22 killagreg 242
                        }
23 killagreg 243
                        else
244
                        {   // send 0x00 if no tx buffer exist or all bytes of the tx buffer have been transmitted
25 killagreg 245
                                data = 0x00;
23 killagreg 246
                        }
25 killagreg 247
                        crc += data;
248
                        Tx_Idx++;
249
                        TWDR = data;
23 killagreg 250
                        TWCR_ACK;
251
            return;
22 killagreg 252
 
253
                case TW_ST_DATA_ACK: // data byte has been transmitted ack has been received
23 killagreg 254
                        // put next byte from tx buffer to the data register
255
                        if((I2C_TxBuffer != 0) && (Tx_Idx < I2C_TxBufferSize))
22 killagreg 256
                        {
25 killagreg 257
                        data = I2C_TxBuffer[Tx_Idx];
258
                        crc += data;
22 killagreg 259
                        }
25 killagreg 260
                        else if (Tx_Idx == I2C_TxBufferSize)
261
                        {   // send crc byte at the end
262
                                data = crc;
263
                        }
23 killagreg 264
                        else
25 killagreg 265
                        {
266
                                data = 0x00;
22 killagreg 267
                        }
25 killagreg 268
                        Tx_Idx++;
269
                        TWDR = data;
23 killagreg 270
                        TWCR_ACK;
19 killagreg 271
            return;
272
 
22 killagreg 273
        case TW_BUS_ERROR:  // Bus-Error
23 killagreg 274
            TWCR_CLEARBUS;      // free bus, reset to nonselected slave
19 killagreg 275
            return;
276
 
22 killagreg 277
                case TW_ST_DATA_NACK:   // data transmitted, NACK received
278
                case TW_ST_LAST_DATA:   // last data byte transmitted, ACK received
279
                case TW_SR_STOP:                // stop or repeated start condition received while selected
280
                default:
281
                        TWCR_RESET; // switch to the not addressed slave mode, own SLA will be recognized
282
                return;
19 killagreg 283
        }
1 ingob 284
}
285
 
286