Subversion Repositories MK3Mag

Rev

Rev 22 | Details | Compare with Previous | Last modification | View Log | RSS feed

Rev Author Line No. Line
12 hbuss 1
/*#######################################################################################
2
MK3Mag 3D-Magnet sensor
19 killagreg 3
!!! THIS IS NOT FREE SOFTWARE !!!
12 hbuss 4
#######################################################################################*/
5
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
6
// + Copyright (c) 05.2008 Holger Buss
7
// + Thanks to Ilja Fähnrich (P_Latzhalter)
7 hbuss 8
// + Nur für den privaten Gebrauch
12 hbuss 9
// + www.MikroKopter.com
10
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
19 killagreg 11
// + Die Portierung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur
12 hbuss 12
// + mit unserer Zustimmung zulässig
13
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
19 killagreg 14
// + Es gilt für das gesamte Projekt (Hardware, Software, Binärfiles, Sourcecode und Dokumentation),
15
// + dass eine Nutzung (auch auszugsweise) nur für den privaten (nicht-kommerziellen) Gebrauch zulässig ist.
12 hbuss 16
// + AUSNAHME: Ein bei www.mikrokopter.de erworbener vorbestückter MK3Mag darf als Baugruppe auch in kommerziellen Systemen verbaut werden
17
// + Im Zweifelsfall bitte anfragen bei: info@mikrokopter.de
18
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
19 killagreg 19
// + Werden Teile des Quellcodes (mit oder ohne Modifikation) weiterverwendet oder veröffentlicht,
12 hbuss 20
// + unterliegen sie auch diesen Nutzungsbedingungen und diese Nutzungsbedingungen incl. Copyright müssen dann beiliegen
21
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
22
// + Sollte die Software (auch auszugesweise) oder sonstige Informationen des MikroKopter-Projekts
23
// + auf anderen Webseiten oder sonstigen Medien veröffentlicht werden, muss unsere Webseite "http://www.mikrokopter.de"
24
// + eindeutig als Ursprung verlinkt werden
25
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
26
// + Keine Gewähr auf Fehlerfreiheit, Vollständigkeit oder Funktion
27
// + Benutzung auf eigene Gefahr
28
// + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden
29
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
30
// + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen
31
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
19 killagreg 32
// + Redistributions of source code (with or without modifications) must retain the above copyright notice,
12 hbuss 33
// + this list of conditions and the following disclaimer.
34
// +   * PORTING this software (or parts of it) to systems (other than hardware from www.mikrokopter.de) is NOT allowed
35
// +   * Neither the name of the copyright holders nor the names of contributors may be used to endorse or promote products derived
36
// +     from this software without specific prior written permission.
19 killagreg 37
// +   * The use of this project (hardware, software, binary files, sources and documentation) is only permittet
12 hbuss 38
// +     for non-commercial use (directly or indirectly)
19 killagreg 39
// +     Commercial use (for excample: selling of MikroKopters, selling of PCBs, assembly, ...) is only permitted
12 hbuss 40
// +     with our written permission
41
// +     Exception: A preassembled MK3Mag, purchased from www.mikrokopter.de may be used as a part of commercial systems
42
// +     In case of doubt please contact: info@MikroKopter.de
19 killagreg 43
// +   * If sources or documentations are redistributet on other webpages, our webpage (http://www.MikroKopter.de) must be
44
// +     clearly linked as origin
12 hbuss 45
// +  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
46
// +  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
47
// +  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
48
// +  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
49
// +  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
50
// +  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
51
// +  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
52
// +  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
53
// +  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
54
// +  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
19 killagreg 55
// +  POSSIBILITY OF SUCH DAMAGE.
12 hbuss 56
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
19 killagreg 57
#include <inttypes.h>
58
#include <avr/io.h>
59
#include <avr/interrupt.h>
1 ingob 60
#include "main.h"
61
 
19 killagreg 62
volatile uint16_t CountMilliseconds = 0;
63
volatile uint16_t I2C_Timeout = 0;
1 ingob 64
 
65
 
19 killagreg 66
/*****************************************************/
67
/*              Initialize Timer 0                   */
68
/*****************************************************/
69
void TIMER0_Init(void)
1 ingob 70
{
19 killagreg 71
        // set PB2 as output for the PWM used to signal compass heading
72
        DDRB |= (1<<DDB2);
73
        PORTB &= ~(1<<PORTB2);
74
 
75
 
76
        // Timer/Counter 0 Control Register A
77
 
78
        // Normal Timer Counter Mode (Bits WGM02 = 0, WGM01 = 0, WGM00 = 0)
79
    // OC0A disconnected (Bits COM0A1 = 0, COM0A0 = 0)
80
    // OC0B disconnected (Bits COM0B1 = 0, COM0B0 = 0)
81
    TCCR0A &= ~((1<<COM0A1)|(1<<COM0A0)|(1<<COM0B1)|(1<<COM0B0)|(1<<WGM01)|(1<<WGM00));
82
 
83
        // Timer/Counter 0 Control Register B
84
 
85
        // set clock devider for timer 0 to SYSKLOCK/8 = 8MHz / 8 = 1MHz
86
        // i.e. the timer increments from 0x00 to 0xFF with an update rate of 2.5 MHz
87
        // hence the timer overflow interrupt frequency is 2.5 MHz / 256 = 9.765 kHz
88
 
89
        // divider 8 (Bits CS02 = 0, CS01 = 1, CS00 = 0)
90
        TCCR0B &= ~((1<<FOC0A)|(1<<FOC0B)|(1<<WGM02)|(1<<CS02));
91
    TCCR0B = (1<<CS01)|(0<<CS00);
92
 
93
        // init Timer/Counter 0 Register
94
    TCNT0 = 0;
95
 
96
        // Timer/Counter 0 Interrupt Mask Register
97
        // enable timer overflow interrupt only
98
        TIMSK0 &= ~((1<<OCIE0B)|(1<<OCIE0A));
99
        TIMSK0 |= (1<<TOIE0);
100
 
1 ingob 101
}
102
 
103
 
19 killagreg 104
// -----------------------------------------------------------------------
105
ISR(TIMER0_OVF_vect)
1 ingob 106
{
19 killagreg 107
        static uint8_t cnt;
108
        static uint16_t cmps_cnt;
109
 
110
        // reload timer register so that overflow occurs after 100 increments at 1 MHz
111
        // resulting in a calling rate of this ISR of 10kHz or 0.1 ms.
112
        TCNT0 -= 101;
113
 
114
        // disable PWM when bad compass heading value
115
        if(Heading < 0)
116
        {
29 killagreg 117
                PORTB &= ~(1<<PORTB2);
19 killagreg 118
                cmps_cnt = 0;
119
        }
120
        else
121
        {
122
                // if a periode of 38.0 ms is over
123
                if(++cmps_cnt >= 380)
124
                {
125
                        // set PWM out to high
29 killagreg 126
                        PORTB |= (1<<PORTB2);
19 killagreg 127
                        // reset periode counter
128
                        cmps_cnt = 0;
129
                }
130
                // if the delay in 0.1 ms is equal to Heading + 10
131
                else if(cmps_cnt >= (Heading + 10))
132
                {
133
                        // set PWM out to low
29 killagreg 134
                        PORTB &= ~(1<<PORTB2);
19 killagreg 135
                }
136
        }
137
 
138
        if(!--cnt)
139
        {
140
                // every 10th run (1kHz or 1ms)
141
                cnt = 10;
142
                CountMilliseconds++;
143
                if(I2C_Timeout) I2C_Timeout--;
144
        }
1 ingob 145
}
146
 
147
 
19 killagreg 148
// -----------------------------------------------------------------------
149
uint16_t SetDelay (uint16_t t)
1 ingob 150
{
19 killagreg 151
  return(CountMilliseconds + t - 1);
1 ingob 152
}
153
 
19 killagreg 154
// -----------------------------------------------------------------------
155
int8_t CheckDelay(uint16_t t)
1 ingob 156
{
19 killagreg 157
        return(((t - CountMilliseconds) & 0x8000) >> 8); // check sign bit
1 ingob 158
}
159
 
19 killagreg 160
// -----------------------------------------------------------------------
161
void Delay_ms(uint16_t wait)
1 ingob 162
{
19 killagreg 163
        uint16_t t_stop;
164
        t_stop = SetDelay(wait);
165
        while (!CheckDelay(t_stop));
1 ingob 166
}
19 killagreg 167
 
168
 
169
 
170