Subversion Repositories FlightCtrl

Rev

Rev 2048 | Rev 2055 | Go to most recent revision | Details | Compare with Previous | Last modification | View Log | RSS feed

Rev Author Line No. Line
1775 - 1
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
2
// + Copyright (c) 04.2007 Holger Buss
3
// + Nur für den privaten Gebrauch
4
// + www.MikroKopter.com
5
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
6
// + Es gilt für das gesamte Projekt (Hardware, Software, Binärfiles, Sourcecode und Dokumentation),
1963 - 7
// + dass eine Nutzung (auch auszugsweise) nur f�r den privaten und nicht-kommerziellen Gebrauch zulässig ist.
1775 - 8
// + Sollten direkte oder indirekte kommerzielle Absichten verfolgt werden, ist mit uns (info@mikrokopter.de) Kontakt
9
// + bzgl. der Nutzungsbedingungen aufzunehmen.
10
// + Eine kommerzielle Nutzung ist z.B.Verkauf von MikroKoptern, Bestückung und Verkauf von Platinen oder Bausätzen,
11
// + Verkauf von Luftbildaufnahmen, usw.
12
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
13
// + Werden Teile des Quellcodes (mit oder ohne Modifikation) weiterverwendet oder veröffentlicht,
14
// + unterliegen sie auch diesen Nutzungsbedingungen und diese Nutzungsbedingungen incl. Copyright müssen dann beiliegen
15
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
16
// + Sollte die Software (auch auszugesweise) oder sonstige Informationen des MikroKopter-Projekts
1963 - 17
// + auf anderen Webseiten oder Medien veröffentlicht werden, muss unsere Webseite "http://www.mikrokopter.de"
18
// + eindeutig als Ursprung verlinkt und genannt werden
1775 - 19
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
20
// + Keine Gewähr auf Fehlerfreiheit, Vollständigkeit oder Funktion
21
// + Benutzung auf eigene Gefahr
22
// + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden
23
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
24
// + Die Portierung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur
25
// + mit unserer Zustimmung zulässig
26
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
27
// + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen
28
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
29
// + Redistributions of source code (with or without modifications) must retain the above copyright notice,
30
// + this list of conditions and the following disclaimer.
31
// +   * Neither the name of the copyright holders nor the names of contributors may be used to endorse or promote products derived
32
// +     from this software without specific prior written permission.
33
// +   * The use of this project (hardware, software, binary files, sources and documentation) is only permittet
34
// +     for non-commercial use (directly or indirectly)
1868 - 35
// +     Commercial use (for example: selling of MikroKopters, selling of PCBs, assembly, ...) is only permitted
1775 - 36
// +     with our written permission
37
// +   * If sources or documentations are redistributet on other webpages, out webpage (http://www.MikroKopter.de) must be
38
// +     clearly linked as origin
39
// +   * porting to systems other than hardware from www.mikrokopter.de is not allowed
40
// +  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
41
// +  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
42
// +  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
43
// +  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
44
// +  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
45
// +  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
46
// +  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
1963 - 47
// +  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
48
// +  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
1775 - 49
// +  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
50
// +  POSSIBILITY OF SUCH DAMAGE.
51
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
52
#include <stdlib.h>
53
#include "commands.h"
54
#include "controlMixer.h"
55
#include "flight.h"
56
#include "eeprom.h"
57
#include "attitude.h"
1887 - 58
#include "output.h"
2052 - 59
#include "rc.h"
1775 - 60
 
2052 - 61
#ifdef USE_MK3MAG
62
// TODO: Kick that all outa here!
2048 - 63
uint8_t compassCalState = 0;
2052 - 64
#endif
2048 - 65
 
1775 - 66
void commands_handleCommands(void) {
1821 - 67
        /*
68
         * Get the current command (start/stop motors, calibrate), if any.
69
         */
70
        uint8_t command = controlMixer_getCommand();
71
        uint8_t repeated = controlMixer_isCommandRepeated();
72
        uint8_t argument = controlMixer_getArgument();
1775 - 73
 
1821 - 74
        if (!(MKFlags & MKFLAG_MOTOR_RUN)) {
75
                if (command == COMMAND_GYROCAL && !repeated) {
76
                        // Run gyro calibration but do not repeat it.
77
                        // TODO: out of here. Anyway, MKFLAG_MOTOR_RUN is cleared. Not enough?
78
                        // isFlying = 0;
79
                        // check roll/pitch stick position
80
                        // if pitch stick is top or roll stick is left or right --> change parameter setting
81
                        // according to roll/pitch stick position
82
 
83
                        if (argument < 6) {
84
                                // Gyro calinbration, with or without selecting a new parameter-set.
85
                                if (argument > 0 && argument < 6) {
86
                                        // A valid parameter-set (1..5) was chosen - use it.
87
                                        setActiveParamSet(argument);
88
                                }
1960 - 89
                                paramSet_readFromEEProm(getActiveParamSet());
1969 - 90
                                analog_calibrateGyros();
1821 - 91
                                attitude_setNeutral();
92
                                flight_setNeutral();
93
                                controlMixer_setNeutral();
94
                                beepNumber(getActiveParamSet());
2052 - 95
                        }
96
#ifdef USE_MK3MAG
97
                        else if (staticParams.bitConfig & (CFG_COMPASS_ENABLED | CFG_GPS_ENABLED) && argument == 7) {
1821 - 98
                                // If right stick is centered and down
99
                                compassCalState = 1;
100
                                beep(1000);
101
                        }
2052 - 102
#endif
1821 - 103
                }
104
 
105
                // save the ACC neutral setting to eeprom
106
                else {
107
                        if (command == COMMAND_ACCCAL && !repeated) {
108
                                // Run gyro and acc. meter calibration but do not repeat it.
109
                                analog_calibrateAcc();
110
                                attitude_setNeutral();
111
                                flight_setNeutral();
112
                                controlMixer_setNeutral();
113
                                beepNumber(getActiveParamSet());
114
                        }
115
                }
116
        } // end !MOTOR_RUN condition.
117
        if (command == COMMAND_START) {
118
                isFlying = 1; // TODO: Really????
119
                // if (!controlMixer_isCommandRepeated()) {
120
                // attitude_startDynamicCalibration(); // Try sense the effect of the motors on sensors.
121
                MKFlags |= (MKFLAG_MOTOR_RUN | MKFLAG_START); // set flag RUN and START. TODO: Is that START flag used at all???
122
                // } else { // Pilot is holding stick, ever after motor start. Continue to sense the effect of the motors on sensors.
123
                // attitude_continueDynamicCalibration();
124
                // setPointYaw = 0;
125
                // IPartPitch = 0;
126
                // IPartRoll = 0;
127
                // }
128
        } else if (command == COMMAND_STOP) {
129
                isFlying = 0;
130
                MKFlags &= ~(MKFLAG_MOTOR_RUN);
1775 - 131
        }
132
}
2048 - 133
 
134
/*
135
 *     if (controlMixer_testCompassCalState()) {
136
      compassCalState++;
137
      if (compassCalState < 5)
138
        beepNumber(compassCalState);
139
      else
140
        beep(1000);
141
    }
142
 *
143
 */
144
 
2052 - 145
#ifdef USE_MK3MAG
2048 - 146
uint8_t commands_isCalibratingCompass(void) {
147
  return RC_testCompassCalState();
148
}
2052 - 149
#endif