Rev 43 | Rev 51 | Go to most recent revision | Details | Compare with Previous | Last modification | View Log | RSS feed
| Rev | Author | Line No. | Line |
|---|---|---|---|
| 1 | ingob | 1 | /*############################################################################ |
| 2 | + Regler für Brushless-Motoren |
||
| 3 | + ATMEGA8 mit 8MHz |
||
| 4 | + (c) 01.2007 Holger Buss |
||
| 5 | + Nur für den privaten Gebrauch |
||
| 6 | + Keine Garantie auf Fehlerfreiheit |
||
| 7 | + Kommerzielle Nutzung nur mit meiner Zustimmung |
||
| 8 | + Der Code ist für die Hardware BL_Ctrl V1.0 entwickelt worden |
||
| 9 | + www.mikrocontroller.com |
||
| 10 | /############################################################################*/ |
||
| 11 | |||
| 12 | #include "main.h" |
||
| 13 | |||
| 14 | unsigned int PWM = 0; |
||
| 15 | unsigned int Strom = 0; //ca. in 0,1A |
||
| 16 | unsigned char Strom_max = 0; |
||
| 17 | unsigned char Mittelstrom = 0; |
||
| 18 | unsigned int Drehzahl = 0; // in 100UPM 60 = 6000 |
||
| 19 | unsigned int KommutierDelay = 10; |
||
| 20 | unsigned int I2C_Timeout = 0; |
||
| 23 | ingob | 21 | unsigned int SIO_Timeout = 0; |
| 1 | ingob | 22 | unsigned int SollDrehzahl = 0; |
| 23 | unsigned int IstDrehzahl = 0; |
||
| 24 | unsigned int DrehZahlTabelle[256];//vorberechnete Werte zur Drehzahlerfassung |
||
| 25 | unsigned char ZeitFuerBerechnungen = 1; |
||
| 26 | unsigned char MotorAnwerfen = 0; |
||
| 27 | unsigned char MotorGestoppt = 1; |
||
| 28 | unsigned char MaxPWM = MAX_PWM; |
||
| 29 | unsigned int CntKommutierungen = 0; |
||
| 30 | unsigned int SIO_Drehzahl = 0; |
||
| 31 | unsigned char ZeitZumAdWandeln = 1; |
||
| 24 | ingob | 32 | unsigned char MotorAdresse = 1; |
| 50 | holgerb | 33 | unsigned char PPM_Betrieb = 1; |
| 1 | ingob | 34 | |
| 35 | //############################################################################ |
||
| 36 | // |
||
| 37 | void SetPWM(void) |
||
| 38 | //############################################################################ |
||
| 39 | { |
||
| 40 | unsigned char tmp_pwm; |
||
| 41 | tmp_pwm = PWM; |
||
| 42 | if(tmp_pwm > MaxPWM) // Strombegrenzung |
||
| 43 | { |
||
| 44 | tmp_pwm = MaxPWM; |
||
| 45 | PORTC |= ROT; |
||
| 46 | } |
||
| 47 | if(Strom > MAX_STROM) // Strombegrenzung |
||
| 48 | { |
||
| 49 | OCR1A = 0; OCR1B = 0; OCR2 = 0; |
||
| 50 | PORTC |= ROT; |
||
| 51 | Strom--; |
||
| 52 | } |
||
| 53 | else |
||
| 54 | { |
||
| 55 | #ifdef _32KHZ |
||
| 56 | OCR1A = tmp_pwm; OCR1B = tmp_pwm; OCR2 = tmp_pwm; |
||
| 57 | #endif |
||
| 58 | |||
| 59 | #ifdef _16KHZ |
||
| 50 | holgerb | 60 | //OCR1A = 2 * (int)tmp_pwm; OCR1B = 2 * (int)tmp_pwm; OCR2 = tmp_pwm; |
| 61 | OCR1A = tmp_pwm; OCR1B = tmp_pwm; OCR2 = tmp_pwm; |
||
| 1 | ingob | 62 | #endif |
| 63 | } |
||
| 64 | } |
||
| 65 | |||
| 66 | //############################################################################ |
||
| 67 | // |
||
| 68 | void PWM_Init(void) |
||
| 69 | //############################################################################ |
||
| 70 | { |
||
| 71 | PWM_OFF; |
||
| 50 | holgerb | 72 | TCCR1B = (1 << CS10) | (0 << CS11) | (0 << CS12) | (0 << WGM12) | |
| 1 | ingob | 73 | (0 << WGM13) | (0<< ICES1) | (0 << ICNC1); |
| 50 | holgerb | 74 | /* TCCR1B = (1 << CS10) | (0 << CS11) | (0 << CS12) | (1 << WGM12) | |
| 75 | (0 << WGM13) | (0<< ICES1) | (0 << ICNC1); |
||
| 76 | */ |
||
| 1 | ingob | 77 | } |
| 78 | |||
| 79 | //############################################################################ |
||
| 80 | // |
||
| 81 | void Wait(unsigned char dauer) |
||
| 82 | //############################################################################ |
||
| 83 | { |
||
| 84 | dauer = (unsigned char)TCNT0 + dauer; |
||
| 85 | while((TCNT0 - dauer) & 0x80); |
||
| 86 | } |
||
| 87 | |||
| 88 | //############################################################################ |
||
| 89 | // |
||
| 90 | void Anwerfen(unsigned char pwm) |
||
| 91 | //############################################################################ |
||
| 92 | { |
||
| 93 | unsigned long timer = 300,i; |
||
| 94 | DISABLE_SENSE_INT; |
||
| 95 | PWM = 5; |
||
| 96 | SetPWM(); |
||
| 97 | Manuell(); |
||
| 98 | Delay_ms(200); |
||
| 99 | PWM = pwm; |
||
| 100 | while(1) |
||
| 101 | { |
||
| 102 | for(i=0;i<timer; i++) |
||
| 103 | { |
||
| 104 | if(!UebertragungAbgeschlossen) SendUart(); |
||
| 105 | else DatenUebertragung(); |
||
| 106 | Wait(100); // warten |
||
| 107 | } |
||
| 108 | timer-= timer/15+1; |
||
| 109 | if(timer < 25) { if(TEST_MANUELL) timer = 25; else return; } |
||
| 110 | |||
| 111 | Manuell(); |
||
| 112 | Phase++; |
||
| 113 | Phase %= 6; |
||
| 114 | AdConvert(); |
||
| 115 | PWM = pwm; |
||
| 116 | SetPWM(); |
||
| 117 | if(SENSE) |
||
| 118 | { |
||
| 119 | PORTD ^= GRUEN; |
||
| 120 | } |
||
| 121 | } |
||
| 122 | } |
||
| 123 | |||
| 50 | holgerb | 124 | /* |
| 125 | #define SENSE_A ADMUX = 0; |
||
| 126 | #define SENSE_B ADMUX = 1; |
||
| 127 | #define SENSE_C ADMUX = 2; |
||
| 128 | |||
| 129 | #define ClrSENSE ACSR |= 0x10 |
||
| 130 | #define SENSE ((ACSR & 0x10)) |
||
| 131 | #define SENSE_L (!(ACSR & 0x20)) |
||
| 132 | #define SENSE_H ((ACSR & 0x20)) |
||
| 133 | */ |
||
| 134 | |||
| 135 | void RotBlink(unsigned char anz) |
||
| 136 | { |
||
| 137 | sei(); // Interrupts ein |
||
| 138 | while(anz--) |
||
| 139 | { |
||
| 140 | PORTC |= ROT; |
||
| 141 | Delay_ms(300); |
||
| 142 | PORTC &= ~ROT; |
||
| 143 | Delay_ms(300); |
||
| 144 | } |
||
| 145 | Delay_ms(1000); |
||
| 146 | } |
||
| 147 | |||
| 148 | #define TEST_STROMGRENZE 100 |
||
| 149 | unsigned char DelayM(unsigned int timer) |
||
| 150 | { |
||
| 151 | while(timer--) |
||
| 152 | { |
||
| 153 | FastADConvert(); |
||
| 154 | if(Strom > TEST_STROMGRENZE) |
||
| 155 | { |
||
| 156 | STEUER_OFF; |
||
| 157 | return(1); |
||
| 158 | } |
||
| 159 | } |
||
| 160 | return(0); |
||
| 161 | } |
||
| 162 | |||
| 163 | unsigned char Delay(unsigned int timer) |
||
| 164 | { |
||
| 165 | while(timer--) |
||
| 166 | { |
||
| 167 | } |
||
| 168 | return(0); |
||
| 169 | } |
||
| 170 | |||
| 171 | |||
| 172 | void MotorTon(void) |
||
| 1 | ingob | 173 | //############################################################################ |
| 50 | holgerb | 174 | { |
| 175 | unsigned int timer = 300,i; |
||
| 176 | unsigned int t; |
||
| 177 | unsigned char MosfetKurzschluss = 0, MosfetOkay = 0,anz = 0; |
||
| 178 | DISABLE_SENSE_INT; |
||
| 179 | cli();//Globale Interrupts Ausschalten |
||
| 180 | PORTC &= ~ROT; |
||
| 181 | PWM = 0; |
||
| 182 | SetPWM(); |
||
| 183 | uart_putchar('\n'); |
||
| 184 | STEUER_OFF; |
||
| 185 | //#define STEUER_A_L {PORTD &= ~0x30; PORTD |= 0x08;} |
||
| 186 | //#define STEUER_B_L {PORTD &= ~0x28; PORTD |= 0x10;} |
||
| 187 | //#define STEUER_C_L {PORTD &= ~0x18; PORTD |= 0x20;} |
||
| 188 | //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
| 189 | //+ High-Mosfets auf Kurzschluss testen |
||
| 190 | //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
| 191 | Strom = 0; |
||
| 192 | PORTD |= 0x08; // Low A ein |
||
| 193 | PORTB |= 0x04; // High B ein; und A gegen B |
||
| 194 | //PORTB |= 0x08; // Test A |
||
| 195 | if(DelayM(3)) |
||
| 196 | { |
||
| 197 | MosfetKurzschluss = 0x01; |
||
| 198 | anz = 1; |
||
| 199 | uart_putchar('A'); |
||
| 200 | } |
||
| 201 | STEUER_OFF; |
||
| 202 | DelayM(100); |
||
| 203 | Strom = 0; |
||
| 204 | PORTD |= 0x10; // Low B ein |
||
| 205 | PORTB |= 0x02; // High C ein |
||
| 206 | //PORTB |= 0x04; // Test B |
||
| 207 | if(DelayM(3)) |
||
| 208 | { |
||
| 209 | anz = 2; |
||
| 210 | MosfetKurzschluss = 0x02; |
||
| 211 | uart_putchar('B'); |
||
| 212 | } |
||
| 213 | STEUER_OFF; |
||
| 214 | DelayM(100); |
||
| 215 | Strom = 0; |
||
| 216 | PORTD |= 0x20; // Low C ein |
||
| 217 | PORTB |= 0x04; // High B ein |
||
| 218 | //PORTB |= 0x0C; // High A+B ein |
||
| 219 | //PORTB |= 0x02; // Test C |
||
| 220 | if(DelayM(3)) |
||
| 221 | { |
||
| 222 | anz = 3; |
||
| 223 | MosfetKurzschluss = 0x04; |
||
| 224 | uart_putchar('C'); |
||
| 225 | } |
||
| 226 | STEUER_OFF; |
||
| 227 | DelayM(100); |
||
| 228 | PORTD |= 0x08; // Low A ein; und A gegen C |
||
| 229 | PORTB |= 0x02; // High C ein |
||
| 230 | //PORTB |= 0x08; // Test A |
||
| 231 | if(DelayM(3)) |
||
| 232 | { |
||
| 233 | anz = 3; |
||
| 234 | MosfetKurzschluss = 0x01; |
||
| 235 | uart_putchar('C'); |
||
| 236 | } |
||
| 237 | STEUER_OFF; |
||
| 238 | DelayM(100); |
||
| 239 | if(anz) while(1) RotBlink(anz); |
||
| 240 | //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
| 241 | //+ Low-Mosfets auf Kurzschluss testen |
||
| 242 | //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
| 243 | Strom = 0; |
||
| 244 | PORTB |= 0x08; // Test A |
||
| 245 | //PORTD |= 0x08; // Low A ein |
||
| 246 | if(DelayM(3)) |
||
| 247 | { |
||
| 248 | anz = 4; |
||
| 249 | MosfetKurzschluss = 0x01; |
||
| 250 | uart_putchar('a'); |
||
| 251 | } |
||
| 252 | STEUER_OFF; |
||
| 253 | Strom = 0; |
||
| 254 | PORTB |= 0x04; // Test B |
||
| 255 | //PORTD |= 0x10; // Low B ein |
||
| 256 | if(DelayM(3)) |
||
| 257 | { |
||
| 258 | anz = 5; |
||
| 259 | MosfetKurzschluss = 0x02; |
||
| 260 | uart_putchar('b'); |
||
| 261 | } |
||
| 262 | STEUER_OFF; |
||
| 263 | Strom = 0; |
||
| 264 | PORTB |= 0x02; // Test C |
||
| 265 | //PORTD |= 0x20; // Low C ein |
||
| 266 | if(DelayM(3)) |
||
| 267 | { |
||
| 268 | anz = 6; |
||
| 269 | MosfetKurzschluss = 0x04; |
||
| 270 | uart_putchar('c'); |
||
| 271 | } |
||
| 272 | STEUER_OFF; |
||
| 273 | |||
| 274 | if(anz) while(1) RotBlink(anz); |
||
| 275 | |||
| 276 | //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
| 277 | //+ High-Mosfets auf Schalten testen |
||
| 278 | //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
| 279 | SENSE_A; |
||
| 280 | STEUER_OFF; |
||
| 281 | PORTD |= 0x10; // Low B ein |
||
| 282 | PORTD |= 0x20; // Low C ein |
||
| 283 | Strom = 0; |
||
| 284 | #define TONDAUER 100000 |
||
| 285 | #define SOUND_E 5 |
||
| 286 | #define SOUND2_A 500 |
||
| 287 | for(i=0; i< (TONDAUER / SOUND2_A) ; i++) |
||
| 288 | { |
||
| 289 | PORTB |= 0x08; // Test A |
||
| 290 | Delay(SOUND_E); |
||
| 291 | if(SENSE_L) { MosfetOkay |= 0x01; } else { MosfetOkay &= ~0x01;} |
||
| 292 | PORTB = 0; |
||
| 293 | Delay(SOUND2_A); |
||
| 294 | } |
||
| 295 | STEUER_OFF; |
||
| 296 | SENSE_B; |
||
| 297 | PORTD |= 0x08; // Low A ein |
||
| 298 | PORTD |= 0x20; // Low C ein |
||
| 299 | #define SOUND1_A 600 |
||
| 300 | for(i=0; i<(TONDAUER / SOUND1_A); i++) |
||
| 301 | { |
||
| 302 | PORTB |= 0x04; // Test B |
||
| 303 | Delay(SOUND_E); |
||
| 304 | if(SENSE_L) { MosfetOkay |= 0x02; } else { MosfetOkay &= ~0x02;} |
||
| 305 | PORTB = 0; |
||
| 306 | Delay(SOUND1_A); |
||
| 307 | } |
||
| 308 | |||
| 309 | STEUER_OFF; |
||
| 310 | SENSE_C; |
||
| 311 | PORTD |= 0x08; // Low A ein |
||
| 312 | PORTD |= 0x10; // Low B ein |
||
| 313 | #define SOUND3_A 700 |
||
| 314 | for(i=0; i<(TONDAUER / SOUND3_A); i++) |
||
| 315 | { |
||
| 316 | PORTB |= 0x02; // Test C |
||
| 317 | Delay(SOUND_E); |
||
| 318 | if(SENSE_L) { MosfetOkay |= 0x04; } else { MosfetOkay &= ~0x04;} |
||
| 319 | PORTB = 0; |
||
| 320 | Delay(SOUND3_A); |
||
| 321 | } |
||
| 322 | STEUER_OFF; |
||
| 323 | //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
| 324 | //+ Low-Mosfets auf Schalten testen |
||
| 325 | //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
| 326 | SENSE_B; |
||
| 327 | PORTD |= 0x08; // Low A ein |
||
| 328 | #define SOUND2_A 500 |
||
| 329 | for(i=0; i< (TONDAUER / SOUND2_A) ; i++) |
||
| 330 | { |
||
| 331 | PORTB |= 0x04; // Test B |
||
| 332 | Delay(SOUND_E); |
||
| 333 | if(SENSE_L) { MosfetOkay |= 0x08; } else { MosfetOkay &= ~0x08;} |
||
| 334 | PORTB = 0; |
||
| 335 | Delay(SOUND2_A); |
||
| 336 | } |
||
| 337 | |||
| 338 | STEUER_OFF; |
||
| 339 | SENSE_C; |
||
| 340 | PORTD |= 0x10; // Low B ein |
||
| 341 | for(i=0; i<(TONDAUER / SOUND3_A); i++) |
||
| 342 | { |
||
| 343 | PORTB |= 0x02; // Test C |
||
| 344 | Delay(SOUND_E); |
||
| 345 | if(SENSE_L) { MosfetOkay |= 0x10; } else { MosfetOkay &= ~0x10;} |
||
| 346 | PORTB = 0; |
||
| 347 | Delay(SOUND3_A); |
||
| 348 | } |
||
| 349 | |||
| 350 | STEUER_OFF; |
||
| 351 | SENSE_B; |
||
| 352 | PORTD |= 0x20; // Low C ein |
||
| 353 | for(i=0; i<(TONDAUER / SOUND1_A); i++) |
||
| 354 | { |
||
| 355 | PORTB |= 0x04; // Test B |
||
| 356 | Delay(SOUND_E); |
||
| 357 | if(SENSE_L) { MosfetOkay |= 0x20; } else { MosfetOkay &= ~0x20;} |
||
| 358 | PORTB = 0; |
||
| 359 | Delay(SOUND1_A); |
||
| 360 | } |
||
| 361 | |||
| 362 | sei();//Globale Interrupts Einschalten |
||
| 363 | Delay_ms(250 * MotorAdresse); |
||
| 364 | |||
| 365 | #define SOUND8_E 7 |
||
| 366 | #define SOUND8_A 650 |
||
| 367 | for(i=0; i<(TONDAUER / SOUND8_A); i++) |
||
| 368 | { |
||
| 369 | for(timer = 0; timer < SOUND8_E; timer++) PORTB |= 0x04; // Test B |
||
| 370 | for(timer = 0; timer < SOUND8_A; timer++) PORTB = 0; |
||
| 371 | } |
||
| 372 | |||
| 373 | if(!(MosfetOkay & 0x01)) { anz = 1; uart_putchar('A'); } else |
||
| 374 | if(!(MosfetOkay & 0x02)) { anz = 2; uart_putchar('B'); } else |
||
| 375 | if(!(MosfetOkay & 0x04)) { anz = 3; uart_putchar('C'); } else |
||
| 376 | if(!(MosfetOkay & 0x08)) { anz = 4; uart_putchar('a'); } else |
||
| 377 | if(!(MosfetOkay & 0x10)) { anz = 5; uart_putchar('b'); } else |
||
| 378 | if(!(MosfetOkay & 0x20)) { anz = 6; uart_putchar('c'); } |
||
| 379 | Delay_ms(250 * (4-MotorAdresse)); |
||
| 380 | |||
| 381 | if(MosfetOkay != 0x3f) Delay_ms(1000); |
||
| 382 | |||
| 383 | #define TONDAUER 80000 |
||
| 384 | #define SOUND9_E 20 |
||
| 385 | #define SOUND9_A 500 |
||
| 386 | |||
| 387 | while(anz--) |
||
| 388 | { |
||
| 389 | PORTC |= ROT; |
||
| 390 | if(!(MosfetOkay & 0x04) || !(MosfetOkay & 0x20)) // Schalter C defekt |
||
| 391 | { |
||
| 392 | PORTD |= 0x10; // Low B ein |
||
| 393 | for(i=0; i< (TONDAUER / SOUND9_A) ; i++) |
||
| 394 | { |
||
| 395 | for(timer = 0; timer < SOUND9_E; timer++) PORTB |= 0x08; // Test A |
||
| 396 | for(timer = 0; timer < SOUND9_A; timer++) PORTB = 0; |
||
| 397 | } |
||
| 398 | } |
||
| 399 | else |
||
| 400 | if(!(MosfetOkay & 0x02) || !(MosfetOkay & 0x10)) // Schalter B defekt |
||
| 401 | { |
||
| 402 | PORTD |= 0x20; // Low C ein |
||
| 403 | for(i=0; i< (TONDAUER / SOUND9_A) ; i++) |
||
| 404 | { |
||
| 405 | for(timer = 0; timer < SOUND9_E; timer++) PORTB |= 0x08; // Test A |
||
| 406 | for(timer = 0; timer < SOUND9_A; timer++) PORTB = 0; |
||
| 407 | } |
||
| 408 | } |
||
| 409 | else |
||
| 410 | if(!(MosfetOkay & 0x01) || !(MosfetOkay & 0x08)) // Schalter A defekt |
||
| 411 | { |
||
| 412 | PORTD |= 0x20; // Low C ein |
||
| 413 | for(i=0; i< (TONDAUER / SOUND9_A) ; i++) |
||
| 414 | { |
||
| 415 | for(timer = 0; timer < SOUND9_E; timer++) PORTB |= 0x04; // Test B |
||
| 416 | for(timer = 0; timer < SOUND9_A; timer++) PORTB = 0; |
||
| 417 | } |
||
| 418 | } |
||
| 419 | PORTC &= ~ROT; |
||
| 420 | Delay_ms(300); |
||
| 421 | } |
||
| 422 | } |
||
| 423 | |||
| 424 | //############################################################################ |
||
| 1 | ingob | 425 | // |
| 426 | unsigned char SollwertErmittlung(void) |
||
| 427 | //############################################################################ |
||
| 428 | { |
||
| 429 | static unsigned int sollwert = 0; |
||
| 430 | unsigned int ppm; |
||
| 431 | if(!I2C_Timeout) // bei Erreichen von 0 ist der Wert ungültig |
||
| 432 | { |
||
| 433 | if(SIO_Timeout) // es gibt gültige SIO-Daten |
||
| 434 | { |
||
| 50 | holgerb | 435 | sollwert = (MAX_PWM * (unsigned int) SIO_Sollwert) / 200; // skalieren auf 0-200 = 0-255 |
| 436 | PPM_Betrieb = 0; |
||
| 437 | ICP_INT_DISABLE; |
||
| 438 | PORTC &= ~ROT; |
||
| 1 | ingob | 439 | } |
| 440 | else |
||
| 50 | holgerb | 441 | if(anz_ppm_werte > 20) // es gibt gültige PPM-Daten |
| 1 | ingob | 442 | { |
| 50 | holgerb | 443 | PPM_Betrieb = 1; |
| 1 | ingob | 444 | ppm = PPM_Signal; |
| 445 | if(ppm > 300) ppm = 0; // ungültiges Signal |
||
| 446 | if(ppm > 200) ppm = 200; |
||
| 447 | if(ppm <= MIN_PPM) sollwert = 0; |
||
| 448 | else |
||
| 449 | { |
||
| 450 | sollwert = (int) MIN_PWM + ((MAX_PWM - MIN_PWM) * (ppm - MIN_PPM)) / (190 - MIN_PPM); |
||
| 451 | } |
||
| 452 | PORTC &= ~ROT; |
||
| 453 | } |
||
| 454 | else // Kein gültiger Sollwert |
||
| 455 | { |
||
| 50 | holgerb | 456 | if(!TEST_SCHUB) { if(sollwert) sollwert--; } |
| 457 | PORTC |= ROT; |
||
| 1 | ingob | 458 | } |
| 459 | } |
||
| 460 | else // I2C-Daten sind gültig |
||
| 461 | { |
||
| 462 | sollwert = I2C_RXBuffer; |
||
| 50 | holgerb | 463 | PPM_Betrieb = 0; |
| 1 | ingob | 464 | PORTC &= ~ROT; |
| 50 | holgerb | 465 | ICP_INT_DISABLE; |
| 1 | ingob | 466 | } |
| 467 | if(sollwert > MAX_PWM) sollwert = MAX_PWM; |
||
| 468 | return(sollwert); |
||
| 469 | } |
||
| 470 | |||
| 471 | void DebugAusgaben(void) |
||
| 472 | { |
||
| 473 | DebugOut.Analog[0] = Strom; |
||
| 474 | DebugOut.Analog[1] = Mittelstrom; |
||
| 475 | DebugOut.Analog[2] = SIO_Drehzahl; |
||
| 476 | DebugOut.Analog[3] = PPM_Signal; |
||
| 477 | } |
||
| 478 | |||
| 479 | |||
| 480 | //############################################################################ |
||
| 481 | //Hauptprogramm |
||
| 482 | int main (void) |
||
| 483 | //############################################################################ |
||
| 484 | { |
||
| 485 | char altPhase = 0; |
||
| 486 | int test = 0; |
||
| 487 | unsigned int MinUpmPulse,Blink,TestschubTimer; |
||
| 488 | unsigned int Blink2,MittelstromTimer,DrehzahlMessTimer,MotorGestopptTimer; |
||
| 489 | |||
| 490 | DDRC = 0x08; |
||
| 491 | PORTC = 0x08; |
||
| 492 | DDRD = 0xBA; |
||
| 26 | ingob | 493 | PORTD = 0x00; |
| 1 | ingob | 494 | DDRB = 0x0E; |
| 495 | PORTB = 0x31; |
||
| 24 | ingob | 496 | |
| 497 | #if (MOTORADRESSE == 0) |
||
| 498 | PORTB |= (ADR1 + ADR2); // Pullups für Adresswahl |
||
| 43 | holgerb | 499 | for(test=0;test<500;test++); |
| 24 | ingob | 500 | if (PINB & ADR1) |
| 501 | { |
||
| 502 | if (PINB & ADR2) MotorAdresse = 1; |
||
| 503 | else MotorAdresse = 2; |
||
| 504 | } |
||
| 505 | else |
||
| 506 | { |
||
| 507 | if (PINB & ADR2) MotorAdresse = 3; |
||
| 508 | else MotorAdresse = 4; |
||
| 509 | } |
||
| 510 | #else |
||
| 511 | MotorAdresse = MOTORADRESSE; |
||
| 512 | #endif |
||
| 1 | ingob | 513 | |
| 514 | UART_Init(); |
||
| 515 | Timer0_Init(); |
||
| 50 | holgerb | 516 | sei();//Globale Interrupts Einschalten |
| 1 | ingob | 517 | |
| 518 | // Am Blinken erkennt man die richtige Motoradresse |
||
| 50 | holgerb | 519 | /* |
| 1 | ingob | 520 | for(test=0;test<5;test++) |
| 521 | { |
||
| 24 | ingob | 522 | if(test == MotorAdresse) PORTD |= GRUEN; |
| 1 | ingob | 523 | Delay_ms(150); |
| 524 | PORTD &= ~GRUEN; |
||
| 525 | Delay_ms(250); |
||
| 526 | } |
||
| 527 | |||
| 528 | Delay_ms(500); |
||
| 50 | holgerb | 529 | */ |
| 18 | ingob | 530 | // UART_Init(); // war doppelt |
| 1 | ingob | 531 | PWM_Init(); |
| 532 | |||
| 533 | InitIC2_Slave(0x50); |
||
| 534 | InitPPM(); |
||
| 535 | |||
| 536 | Blink = SetDelay(101); |
||
| 537 | Blink2 = SetDelay(102); |
||
| 538 | MinUpmPulse = SetDelay(103); |
||
| 539 | MittelstromTimer = SetDelay(254); |
||
| 540 | DrehzahlMessTimer = SetDelay(1005); |
||
| 541 | TestschubTimer = SetDelay(1006); |
||
| 50 | holgerb | 542 | while(!CheckDelay(MinUpmPulse)) |
| 543 | { |
||
| 544 | if(SollwertErmittlung()) break; |
||
| 545 | } |
||
| 546 | ; |
||
| 1 | ingob | 547 | PORTD |= GRUEN; |
| 548 | PWM = 0; |
||
| 549 | |||
| 550 | SetPWM(); |
||
| 551 | |||
| 552 | SFIOR = 0x08; // Analog Comperator ein |
||
| 553 | ADMUX = 1; |
||
| 554 | |||
| 555 | MinUpmPulse = SetDelay(10); |
||
| 556 | DebugOut.Analog[1] = 1; |
||
| 557 | PPM_Signal = 0; |
||
| 558 | |||
| 50 | holgerb | 559 | if(!SollwertErmittlung()) MotorTon(); |
| 560 | |||
| 1 | ingob | 561 | // zum Test der Hardware; Motor dreht mit konstanter Drehzahl ohne Regelung |
| 562 | if(TEST_MANUELL) Anwerfen(TEST_MANUELL); // kommt von dort nicht wieder |
||
| 563 | |||
| 564 | while (1) |
||
| 565 | { |
||
| 566 | if(!TEST_SCHUB) PWM = SollwertErmittlung(); |
||
| 567 | //I2C_TXBuffer = PWM; // Antwort über I2C-Bus |
||
| 568 | if(MANUELL_PWM) PWM = MANUELL_PWM; |
||
| 569 | |||
| 570 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
| 571 | if(Phase != altPhase) // es gab eine Kommutierung im Interrupt |
||
| 572 | { |
||
| 573 | MotorGestoppt = 0; |
||
| 574 | ZeitFuerBerechnungen = 0; // direkt nach einer Kommutierung ist Zeit |
||
| 575 | MinUpmPulse = SetDelay(50); // Timeout, falls ein Motor stehen bleibt |
||
| 576 | altPhase = Phase; |
||
| 577 | } |
||
| 578 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
| 579 | if(!PWM) // Sollwert == 0 |
||
| 580 | { |
||
| 581 | MotorAnwerfen = 0; // kein Startversuch |
||
| 582 | ZeitFuerBerechnungen = 0; |
||
| 583 | // nach 1,5 Sekunden den Motor als gestoppt betrachten |
||
| 18 | ingob | 584 | if(CheckDelay(MotorGestopptTimer)) |
| 1 | ingob | 585 | { |
| 586 | DISABLE_SENSE_INT; |
||
| 587 | MotorGestoppt = 1; |
||
| 588 | STEUER_OFF; |
||
| 589 | } |
||
| 590 | } |
||
| 591 | else |
||
| 592 | { |
||
| 593 | if(MotorGestoppt) MotorAnwerfen = 1; // Startversuch |
||
| 594 | MotorGestopptTimer = SetDelay(1500); |
||
| 595 | } |
||
| 596 | |||
| 597 | if(MotorGestoppt && !TEST_SCHUB) PWM = 0; |
||
| 598 | SetPWM(); |
||
| 599 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
| 600 | if(!ZeitFuerBerechnungen++) |
||
| 601 | { |
||
| 602 | if(MotorGestoppt) PORTD |= GRUEN; //else PORTD &= ~GRUEN; |
||
| 603 | if(SIO_DEBUG) |
||
| 604 | { |
||
| 605 | DebugAusgaben(); // welche Werte sollen angezeigt werden? |
||
| 606 | if(!UebertragungAbgeschlossen) SendUart(); |
||
| 607 | else DatenUebertragung(); |
||
| 608 | } |
||
| 609 | // Berechnen des Mittleren Stroms zur (langsamen) Strombegrenzung |
||
| 610 | if(CheckDelay(MittelstromTimer)) |
||
| 611 | { |
||
| 612 | MittelstromTimer = SetDelay(50); // alle 50ms |
||
| 613 | if(Mittelstrom < Strom) Mittelstrom++;// Mittelwert des Stroms bilden |
||
| 614 | else if(Mittelstrom > Strom) Mittelstrom--; |
||
| 615 | |||
| 616 | if(Mittelstrom > LIMIT_STROM)// Strom am Limit? |
||
| 617 | { |
||
| 618 | MaxPWM--;// dann die Maximale PWM herunterfahren |
||
| 619 | PORTC |= ROT; |
||
| 620 | } |
||
| 621 | else |
||
| 622 | { |
||
| 623 | if(MaxPWM < MAX_PWM) MaxPWM++; |
||
| 624 | } |
||
| 625 | } |
||
| 626 | |||
| 627 | if(CheckDelay(DrehzahlMessTimer)) // Ist-Drehzahl bestimmen |
||
| 628 | { |
||
| 629 | DrehzahlMessTimer = SetDelay(10); |
||
| 630 | SIO_Drehzahl = (6 * CntKommutierungen) / (POLANZAHL / 2); |
||
| 631 | CntKommutierungen = 0; |
||
| 632 | if(PPM_Timeout == 0) // keine PPM-Signale |
||
| 633 | ZeitZumAdWandeln = 1; |
||
| 634 | } |
||
| 635 | |||
| 636 | |||
| 637 | if(CheckDelay(TestschubTimer)) |
||
| 638 | { |
||
| 639 | TestschubTimer = SetDelay(1500); |
||
| 640 | if(TEST_SCHUB) |
||
| 641 | { |
||
| 642 | switch(test) |
||
| 643 | { |
||
| 644 | case 0: PWM = 50; test++; break; |
||
| 645 | case 1: PWM = 130; test++; break; |
||
| 646 | case 2: PWM = 60; test++; break; |
||
| 647 | case 3: PWM = 140; test++; break; |
||
| 648 | case 4: PWM = 150; test = 0; break; |
||
| 649 | default: test = 0; |
||
| 650 | } |
||
| 651 | } |
||
| 652 | } |
||
| 653 | // Motor Stehen geblieben |
||
| 654 | if((CheckDelay(MinUpmPulse) && SIO_Drehzahl == 0) || MotorAnwerfen) |
||
| 655 | { |
||
| 656 | MotorGestoppt = 1; |
||
| 657 | DISABLE_SENSE_INT; |
||
| 658 | MinUpmPulse = SetDelay(100); |
||
| 659 | if(MotorAnwerfen) |
||
| 660 | { |
||
| 661 | PORTC &= ~ROT; |
||
| 662 | MotorAnwerfen = 0; |
||
| 663 | Anwerfen(10); |
||
| 664 | PORTD |= GRUEN; |
||
| 665 | MotorGestoppt = 0; |
||
| 666 | Phase--; |
||
| 667 | PWM = 1; |
||
| 668 | SetPWM(); |
||
| 669 | SENSE_TOGGLE_INT; |
||
| 670 | ENABLE_SENSE_INT; |
||
| 43 | holgerb | 671 | MinUpmPulse = SetDelay(20); |
| 1 | ingob | 672 | while(!CheckDelay(MinUpmPulse)); // kurz Synchronisieren |
| 43 | holgerb | 673 | PWM = 15; |
| 1 | ingob | 674 | SetPWM(); |
| 43 | holgerb | 675 | MinUpmPulse = SetDelay(300); |
| 1 | ingob | 676 | while(!CheckDelay(MinUpmPulse)); // kurz Durchstarten |
| 18 | ingob | 677 | |
| 678 | // Drehzahlmessung wieder aufsetzen |
||
| 679 | DrehzahlMessTimer = SetDelay(50); |
||
| 1 | ingob | 680 | altPhase = 7; |
| 681 | } |
||
| 682 | } |
||
| 683 | } // ZeitFuerBerechnungen |
||
| 684 | } // while(1) - Hauptschleife |
||
| 685 | } |
||
| 686 |