Subversion Repositories FlightCtrl

Rev

Go to most recent revision | Details | Last modification | View Log | RSS feed

Rev Author Line No. Line
1622 killagreg 1
#ifndef _EEPROM_H
2
#define _EEPROM_H
3
 
4
#include <inttypes.h>
1657 killagreg 5
#include "twimaster.h"
1622 killagreg 6
 
2008 holgerb 7
#define EEPARAM_REVISION        89 // is count up, if paramater stucture has changed (compatibility)
1685 holgerb 8
#define EEMIXER_REVISION         1 // is count up, if mixer stucture has changed (compatibility)
9
 
1622 killagreg 10
#define EEPROM_ADR_PARAM_BEGIN          0
11
#define PID_EE_REVISION                 1 // byte
12
#define PID_ACTIVE_SET                  2 // byte
13
#define PID_PRESSURE_OFFSET             3 // byte
14
 
15
#define PID_ACC_NICK                    4 // word
16
#define PID_ACC_ROLL                    6 // word
17
#define PID_ACC_TOP                     8 // word
18
 
19
#define PID_FLIGHT_MINUTES_TOTAL        10 // word
20
#define PID_FLIGHT_MINUTES                      14 // word
21
 
1657 killagreg 22
#define EEPROM_ADR_CHANNELS                     80      // 80 - 93, 12 bytes + 1 byte crc
23
#define EEPROM_ADR_PARAMSET                     100 // 100 - 650, 5 * 110 bytes
24
#define EEPROM_ADR_MIXERTABLE           1000 // 1000 - 1078, 78 bytes
25
#define EEPROM_ADR_BLCONFIG                     1200 // 1200 - 1296, 12 * 8 bytes
1622 killagreg 26
 
27
#define MIX_GAS         0
28
#define MIX_NICK        1
29
#define MIX_ROLL        2
30
#define MIX_YAW         3
31
 
32
typedef struct
33
{
34
        uint8_t Revision;
35
    int8_t Name[12];
36
    int8_t Motor[16][4];
37
    uint8_t crc;
38
} __attribute__((packed)) MixerTable_t;
39
 
40
extern MixerTable_t Mixer;
1654 killagreg 41
extern uint8_t RequiredMotors;
1622 killagreg 42
 
2008 holgerb 43
//GlobalConfig3
44
#define CFG3_NO_SDCARD_NO_START  0x01
45
#define CFG3_DPH_MAX_RADIUS      0x02
46
#define CFG3_VARIO_FAILSAFE      0x04
47
 
1913 holgerb 48
//GlobalConfig
1622 killagreg 49
#define CFG_HOEHENREGELUNG       0x01
50
#define CFG_HOEHEN_SCHALTER      0x02
51
#define CFG_HEADING_HOLD         0x04
52
#define CFG_KOMPASS_AKTIV        0x08
53
#define CFG_KOMPASS_FIX          0x10
54
#define CFG_GPS_AKTIV            0x20
55
#define CFG_ACHSENKOPPLUNG_AKTIV 0x40
56
#define CFG_DREHRATEN_BEGRENZER  0x80
57
 
1913 holgerb 58
//BitConfig
1622 killagreg 59
#define CFG_LOOP_OBEN            0x01
60
#define CFG_LOOP_UNTEN           0x02
61
#define CFG_LOOP_LINKS           0x04
62
#define CFG_LOOP_RECHTS          0x08
1940 holgerb 63
#define CFG_MOTOR_BLINK1         0x10
1622 killagreg 64
#define CFG_MOTOR_OFF_LED1       0x20
65
#define CFG_MOTOR_OFF_LED2       0x40
1940 holgerb 66
#define CFG_MOTOR_BLINK2         0x80
1622 killagreg 67
 
1913 holgerb 68
// ExtraConfig
1945 holgerb 69
#define CFG2_HEIGHT_LIMIT                       0x01
70
#define CFG2_VARIO_BEEP                         0x02
71
#define CFG_SENSITIVE_RC                    0x04
72
#define CFG_3_3V_REFERENCE                  0x08
73
#define CFG_NO_RCOFF_BEEPING                    0x10
74
#define CFG_GPS_AID                             0x20
75
#define CFG_LEARNABLE_CAREFREE                  0x40
76
#define CFG_IGNORE_MAG_ERR_AT_STARTUP   0x80
1622 killagreg 77
 
78
// bit mask for ParamSet.Config0
79
#define CFG0_AIRPRESS_SENSOR            0x01
80
#define CFG0_HEIGHT_SWITCH                      0x02
81
#define CFG0_HEADING_HOLD                       0x04
82
#define CFG0_COMPASS_ACTIVE                     0x08
83
#define CFG0_COMPASS_FIX                        0x10
84
#define CFG0_GPS_ACTIVE                         0x20
85
#define CFG0_AXIS_COUPLING_ACTIVE       0x40
86
#define CFG0_ROTARY_RATE_LIMITER        0x80
87
 
88
// defines for the receiver selection
89
#define RECEIVER_PPM                            0
90
#define RECEIVER_SPEKTRUM                       1
91
#define RECEIVER_SPEKTRUM_HI_RES        2
92
#define RECEIVER_SPEKTRUM_LOW_RES       3
93
#define RECEIVER_JETI                           4
94
#define RECEIVER_ACT_DSL                        5
1945 holgerb 95
#define RECEIVER_HOTT                           6
1622 killagreg 96
#define RECEIVER_UNKNOWN                        0xFF
97
 
98
// defines for lookup ParamSet.ChannelAssignment
99
#define K_NICK    0
100
#define K_ROLL    1
101
#define K_GAS     2
102
#define K_GIER    3
103
#define K_POTI1   4
104
#define K_POTI2   5
105
#define K_POTI3   6
106
#define K_POTI4   7
107
#define K_POTI5   8
108
#define K_POTI6   9
109
#define K_POTI7   10
110
#define K_POTI8   11
111
 
112
 
113
// values above 247 representing poti1 to poti8
114
// poti1 = 255
115
// poti2 = 254
116
// poti3 = 253
117
// poti4 = 252
118
// poti5 = 251
119
// poti6 = 250
120
// poti7 = 249
121
// poti8 = 248
122
 
123
 
124
typedef struct
125
{
126
        unsigned char Revision;
127
        unsigned char Kanalbelegung[12];       // GAS[0], GIER[1],NICK[2], ROLL[3], POTI1, POTI2, POTI3
128
        unsigned char GlobalConfig;           // 0x01=Höhenregler aktiv,0x02=Kompass aktiv, 0x04=GPS aktiv, 0x08=Heading Hold aktiv
129
        unsigned char Hoehe_MinGas;           // Wert : 0-100
130
        unsigned char Luftdruck_D;            // Wert : 0-250
131
        unsigned char MaxHoehe;               // Wert : 0-32
132
        unsigned char Hoehe_P;                // Wert : 0-32
133
        unsigned char Hoehe_Verstaerkung;     // Wert : 0-50
134
        unsigned char Hoehe_ACC_Wirkung;      // Wert : 0-250
135
        unsigned char Hoehe_HoverBand;        // Wert : 0-250
136
        unsigned char Hoehe_GPS_Z;            // Wert : 0-250
137
        unsigned char Hoehe_StickNeutralPoint;// Wert : 0-250
138
        unsigned char Stick_P;                // Wert : 1-6
139
        unsigned char Stick_D;                // Wert : 0-64
1944 holgerb 140
        unsigned char StickGier_P;            // Wert : 1-20
1622 killagreg 141
        unsigned char Gas_Min;                // Wert : 0-32
142
        unsigned char Gas_Max;                // Wert : 33-250
143
        unsigned char GyroAccFaktor;          // Wert : 1-64
144
        unsigned char KompassWirkung;         // Wert : 0-32
145
        unsigned char Gyro_P;                 // Wert : 10-250
146
        unsigned char Gyro_I;                 // Wert : 0-250
147
        unsigned char Gyro_D;                 // Wert : 0-250
1685 holgerb 148
        unsigned char Gyro_Gier_P;            // Wert : 10-250
149
        unsigned char Gyro_Gier_I;            // Wert : 0-250
150
        unsigned char Gyro_Stability;         // Wert : 0-16
1622 killagreg 151
        unsigned char UnterspannungsWarnung;  // Wert : 0-250
152
        unsigned char NotGas;                 // Wert : 0-250     //Gaswert bei Empängsverlust
153
        unsigned char NotGasZeit;             // Wert : 0-250     // Zeitbis auf NotGas geschaltet wird, wg. Rx-Problemen
1685 holgerb 154
        unsigned char Receiver;                   // 0= Summensignal, 1= Spektrum, 2 =Jeti, 3=ACT DSL, 4=ACT S3D
1622 killagreg 155
        unsigned char I_Faktor;               // Wert : 0-250
156
        unsigned char UserParam1;             // Wert : 0-250
157
        unsigned char UserParam2;             // Wert : 0-250
158
        unsigned char UserParam3;             // Wert : 0-250
159
        unsigned char UserParam4;             // Wert : 0-250
160
        unsigned char ServoNickControl;       // Wert : 0-250     // Stellung des Servos
161
        unsigned char ServoNickComp;          // Wert : 0-250     // Einfluss Gyro/Servo
162
        unsigned char ServoNickMin;           // Wert : 0-250     // Anschlag
163
        unsigned char ServoNickMax;           // Wert : 0-250     // Anschlag
164
        //--- Seit V0.75
165
        unsigned char ServoRollControl;       // Wert : 0-250     // Stellung des Servos
166
        unsigned char ServoRollComp;          // Wert : 0-250
167
        unsigned char ServoRollMin;           // Wert : 0-250
168
        unsigned char ServoRollMax;           // Wert : 0-250
169
        //---
170
        unsigned char ServoNickRefresh;       // Speed of the Servo
1761 killagreg 171
    unsigned char ServoManualControlSpeed;//
172
    unsigned char CamOrientation;         //
1622 killagreg 173
        unsigned char Servo3;                    // Value or mapping of the Servo Output
174
        unsigned char Servo4;                            // Value or mapping of the Servo Output
175
        unsigned char Servo5;                            // Value or mapping of the Servo Output
176
        unsigned char LoopGasLimit;           // Wert: 0-250  max. Gas während Looping
177
        unsigned char LoopThreshold;          // Wert: 0-250  Schwelle für Stickausschlag
178
        unsigned char LoopHysterese;          // Wert: 0-250  Hysterese für Stickausschlag
179
        unsigned char AchsKopplung1;          // Wert: 0-250  Faktor, mit dem Gier die Achsen Roll und Nick koppelt (NickRollMitkopplung)
180
        unsigned char AchsKopplung2;          // Wert: 0-250  Faktor, mit dem Nick und Roll verkoppelt werden
181
        unsigned char CouplingYawCorrection;  // Wert: 0-250  Faktor, mit dem Nick und Roll verkoppelt werden
182
        unsigned char WinkelUmschlagNick;     // Wert: 0-250  180°-Punkt
183
        unsigned char WinkelUmschlagRoll;     // Wert: 0-250  180°-Punkt
184
        unsigned char GyroAccAbgleich;        // 1/k  (Koppel_ACC_Wirkung)
185
        unsigned char Driftkomp;
186
        unsigned char DynamicStability;
187
        unsigned char UserParam5;             // Wert : 0-250
188
        unsigned char UserParam6;             // Wert : 0-250
189
        unsigned char UserParam7;             // Wert : 0-250
190
        unsigned char UserParam8;             // Wert : 0-250
191
        //---Output ---------------------------------------------
192
        unsigned char J16Bitmask;             // for the J16 Output
193
        unsigned char J16Timing;              // for the J16 Output
194
        unsigned char J17Bitmask;             // for the J17 Output
195
        unsigned char J17Timing;              // for the J17 Output
196
        // seit version V0.75c
197
        unsigned char WARN_J16_Bitmask;       // for the J16 Output
198
        unsigned char WARN_J17_Bitmask;       // for the J17 Output
199
        //---NaviCtrl---------------------------------------------
200
        unsigned char NaviGpsModeControl;     // Parameters for the Naviboard
201
        unsigned char NaviGpsGain;
202
        unsigned char NaviGpsP;
203
        unsigned char NaviGpsI;
204
        unsigned char NaviGpsD;
205
        unsigned char NaviGpsPLimit;
206
        unsigned char NaviGpsILimit;
207
        unsigned char NaviGpsDLimit;
208
        unsigned char NaviGpsACC;
209
        unsigned char NaviGpsMinSat;
210
        unsigned char NaviStickThreshold;
211
        unsigned char NaviWindCorrection;
1936 holgerb 212
        unsigned char NaviAccCompensation;    // New since 0.86 -> was: SpeedCompensation
1622 killagreg 213
        unsigned char NaviOperatingRadius;
214
        unsigned char NaviAngleLimitation;
215
        unsigned char NaviPH_LoginTime;
216
        //---Ext.Ctrl---------------------------------------------
1668 holgerb 217
        unsigned char ExternalControl;         // for serial Control
218
        //---CareFree---------------------------------------------
219
        unsigned char OrientationAngle;        // Where is the front-direction?
1921 holgerb 220
        unsigned char CareFreeModeControl;         // switch for CareFree
1761 killagreg 221
    unsigned char MotorSafetySwitch;
1913 holgerb 222
    unsigned char MotorSmooth;
1915 holgerb 223
    unsigned char ComingHomeAltitude;
1916 holgerb 224
    unsigned char FailSafeTime;
1936 holgerb 225
    unsigned char MaxAltitude;
2008 holgerb 226
        unsigned char FailsafeChannel;         // if the value of this channel is > 100, the MK reports "RC-Lost"
1622 killagreg 227
        //------------------------------------------------
228
        unsigned char BitConfig;          // (war Loop-Cfg) Bitcodiert: 0x01=oben, 0x02=unten, 0x04=links, 0x08=rechts / wird getrennt behandelt
229
        unsigned char ServoCompInvert;    // //  0x01 = Nick, 0x02 = Roll   0 oder 1  // WICHTIG!!! am Ende lassen
230
        unsigned char ExtraConfig;        // bitcodiert
2008 holgerb 231
        unsigned char GlobalConfig3;      // bitcodiert
1622 killagreg 232
        char Name[12];
233
        unsigned char crc;                                // must be the last byte!
234
} paramset_t;
235
 
236
#define  PARAMSET_STRUCT_LEN  sizeof(paramset_t)
237
 
238
extern paramset_t EE_Parameter;
239
 
1657 killagreg 240
extern uint8_t RAM_Checksum(uint8_t* pBuffer, uint16_t len);
241
 
1622 killagreg 242
extern void ParamSet_Init(void);
1761 killagreg 243
extern void SetDefaultParameter(uint8_t set, uint8_t restore_channels);
1657 killagreg 244
 
1622 killagreg 245
extern uint8_t ParamSet_ReadFromEEProm(uint8_t setnumber);
246
extern uint8_t ParamSet_WriteToEEProm(uint8_t setnumber);
247
 
248
extern uint8_t GetActiveParamSet(void);
249
extern void SetActiveParamSet(uint8_t setnumber);
250
 
251
extern uint8_t MixerTable_ReadFromEEProm(void);
252
extern uint8_t MixerTable_WriteToEEProm(void);
253
 
254
extern uint8_t GetParamByte(uint16_t param_id);
255
extern void SetParamByte(uint16_t param_id, uint8_t value);
256
extern uint16_t GetParamWord(uint16_t param_id);
257
extern void SetParamWord(uint16_t param_id, uint16_t value);
258
 
259
 
260
#endif //_EEPROM_H