Subversion Repositories FlightCtrl

Rev

Go to most recent revision | Details | Last modification | View Log | RSS feed

Rev Author Line No. Line
1622 killagreg 1
#ifndef _EEPROM_H
2
#define _EEPROM_H
3
 
4
#include <inttypes.h>
1657 killagreg 5
#include "twimaster.h"
1622 killagreg 6
 
2486 holgerb 7
#define EEPARAM_REVISION        103 // is count up, if paramater stucture has changed (compatibility)
2318 holgerb 8
#define EEMIXER_REVISION         1  // is count up, if mixer stucture has changed (compatibility)
1685 holgerb 9
 
1622 killagreg 10
#define EEPROM_ADR_PARAM_BEGIN          0
2330 holgerb 11
#define EE_DUMMY                                        0 // Byte
1622 killagreg 12
#define PID_EE_REVISION                 1 // byte
13
#define PID_ACTIVE_SET                  2 // byte
14
#define PID_PRESSURE_OFFSET             3 // byte
15
 
16
#define PID_ACC_NICK                    4 // word
17
#define PID_ACC_ROLL                    6 // word
18
#define PID_ACC_TOP                     8 // word
19
 
20
#define PID_FLIGHT_MINUTES_TOTAL        10 // word
21
#define PID_FLIGHT_MINUTES                      14 // word
22
 
2091 holgerb 23
#define PID_SPEAK_HOTT_CFG                      16 // Byte
2318 holgerb 24
#define PID_HARDWARE_VERSION            17 // Byte
2091 holgerb 25
 
2474 holgerb 26
#define PID_GYRO_NICK                   18 // word
27
#define PID_GYRO_ROLL                   20 // word
28
#define PID_GYRO_YAW                    22 // word
29
 
1657 killagreg 30
#define EEPROM_ADR_CHANNELS                     80      // 80 - 93, 12 bytes + 1 byte crc
2480 holgerb 31
#define EEPROM_ADR_PARAMSET                     100 // 100 - 770, 5 * 134 bytes (V1.06)
1657 killagreg 32
#define EEPROM_ADR_MIXERTABLE           1000 // 1000 - 1078, 78 bytes
2480 holgerb 33
//#define EEPROM_ADR_BLCONFIG                   1200 // 1200 - 1296, 12 * 8 bytes
1622 killagreg 34
 
35
#define MIX_GAS         0
36
#define MIX_NICK        1
37
#define MIX_ROLL        2
38
#define MIX_YAW         3
39
 
40
typedef struct
41
{
42
        uint8_t Revision;
43
    int8_t Name[12];
44
    int8_t Motor[16][4];
45
    uint8_t crc;
46
} __attribute__((packed)) MixerTable_t;
47
 
48
extern MixerTable_t Mixer;
1654 killagreg 49
extern uint8_t RequiredMotors;
1622 killagreg 50
 
2008 holgerb 51
//GlobalConfig3
52
#define CFG3_NO_SDCARD_NO_START  0x01
2447 holgerb 53
//#define CFG3_DPH_MAX_RADIUS      0x02
2008 holgerb 54
#define CFG3_VARIO_FAILSAFE      0x04
2146 holgerb 55
#define CFG3_MOTOR_SWITCH_MODE   0x08
56
#define CFG3_NO_GPSFIX_NO_START  0x10
2183 holgerb 57
#define CFG3_USE_NC_FOR_OUT1     0x20
2263 holgerb 58
#define CFG3_SPEAK_ALL           0x40
2380 holgerb 59
#define CFG3_SERVO_NICK_COMP_OFF 0x80
2008 holgerb 60
 
1913 holgerb 61
//GlobalConfig
1622 killagreg 62
#define CFG_HOEHENREGELUNG       0x01
63
#define CFG_HOEHEN_SCHALTER      0x02
64
#define CFG_HEADING_HOLD         0x04
65
#define CFG_KOMPASS_AKTIV        0x08
66
#define CFG_KOMPASS_FIX          0x10
67
#define CFG_GPS_AKTIV            0x20
68
#define CFG_ACHSENKOPPLUNG_AKTIV 0x40
69
#define CFG_DREHRATEN_BEGRENZER  0x80
70
 
1913 holgerb 71
//BitConfig
1622 killagreg 72
#define CFG_LOOP_OBEN            0x01
73
#define CFG_LOOP_UNTEN           0x02
74
#define CFG_LOOP_LINKS           0x04
75
#define CFG_LOOP_RECHTS          0x08
1940 holgerb 76
#define CFG_MOTOR_BLINK1         0x10
1622 killagreg 77
#define CFG_MOTOR_OFF_LED1       0x20
78
#define CFG_MOTOR_OFF_LED2       0x40
1940 holgerb 79
#define CFG_MOTOR_BLINK2         0x80
1622 killagreg 80
 
1913 holgerb 81
// ExtraConfig
1945 holgerb 82
#define CFG2_HEIGHT_LIMIT                       0x01
83
#define CFG2_VARIO_BEEP                         0x02
84
#define CFG_SENSITIVE_RC                    0x04
85
#define CFG_3_3V_REFERENCE                  0x08
86
#define CFG_NO_RCOFF_BEEPING                    0x10
87
#define CFG_GPS_AID                             0x20
88
#define CFG_LEARNABLE_CAREFREE                  0x40
89
#define CFG_IGNORE_MAG_ERR_AT_STARTUP   0x80
1622 killagreg 90
 
91
// bit mask for ParamSet.Config0
92
#define CFG0_AIRPRESS_SENSOR            0x01
93
#define CFG0_HEIGHT_SWITCH                      0x02
94
#define CFG0_HEADING_HOLD                       0x04
95
#define CFG0_COMPASS_ACTIVE                     0x08
96
#define CFG0_COMPASS_FIX                        0x10
97
#define CFG0_GPS_ACTIVE                         0x20
98
#define CFG0_AXIS_COUPLING_ACTIVE       0x40
99
#define CFG0_ROTARY_RATE_LIMITER        0x80
100
 
2240 holgerb 101
// bitcoding for EE_Parameter.ServoCompInvert
102
#define SERVO_NICK_INV 0x01
103
#define SERVO_ROLL_INV 0x02
104
#define SERVO_RELATIVE 0x04   //  direct poti control or relative moving of the servo value
105
 
1622 killagreg 106
// defines for the receiver selection
107
#define RECEIVER_PPM                            0
108
#define RECEIVER_SPEKTRUM                       1
109
#define RECEIVER_SPEKTRUM_HI_RES        2
110
#define RECEIVER_SPEKTRUM_LOW_RES       3
111
#define RECEIVER_JETI                           4
112
#define RECEIVER_ACT_DSL                        5
1945 holgerb 113
#define RECEIVER_HOTT                           6
2011 holgerb 114
#define RECEIVER_SBUS                           7
2034 holgerb 115
#define RECEIVER_USER                           8
2011 holgerb 116
 
1622 killagreg 117
#define RECEIVER_UNKNOWN                        0xFF
118
 
119
// defines for lookup ParamSet.ChannelAssignment
120
#define K_NICK    0
121
#define K_ROLL    1
122
#define K_GAS     2
123
#define K_GIER    3
124
#define K_POTI1   4
125
#define K_POTI2   5
126
#define K_POTI3   6
127
#define K_POTI4   7
128
#define K_POTI5   8
129
#define K_POTI6   9
130
#define K_POTI7   10
131
#define K_POTI8   11
132
 
133
 
134
// values above 247 representing poti1 to poti8
135
// poti1 = 255
136
// poti2 = 254
137
// poti3 = 253
138
// poti4 = 252
139
// poti5 = 251
140
// poti6 = 250
141
// poti7 = 249
142
// poti8 = 248
143
 
144
 
145
typedef struct
146
{
147
        unsigned char Revision;
148
        unsigned char Kanalbelegung[12];       // GAS[0], GIER[1],NICK[2], ROLL[3], POTI1, POTI2, POTI3
149
        unsigned char GlobalConfig;           // 0x01=Höhenregler aktiv,0x02=Kompass aktiv, 0x04=GPS aktiv, 0x08=Heading Hold aktiv
150
        unsigned char Hoehe_MinGas;           // Wert : 0-100
151
        unsigned char Luftdruck_D;            // Wert : 0-250
2342 holgerb 152
        unsigned char HoeheChannel;           // Wert : 0-32
1622 killagreg 153
        unsigned char Hoehe_P;                // Wert : 0-32
154
        unsigned char Hoehe_Verstaerkung;     // Wert : 0-50
155
        unsigned char Hoehe_ACC_Wirkung;      // Wert : 0-250
156
        unsigned char Hoehe_HoverBand;        // Wert : 0-250
2486 holgerb 157
        unsigned char Hoehe_TiltCompensation; // Wert : 0-250
1622 killagreg 158
        unsigned char Hoehe_StickNeutralPoint;// Wert : 0-250
159
        unsigned char Stick_P;                // Wert : 1-6
160
        unsigned char Stick_D;                // Wert : 0-64
1944 holgerb 161
        unsigned char StickGier_P;            // Wert : 1-20
1622 killagreg 162
        unsigned char Gas_Min;                // Wert : 0-32
163
        unsigned char Gas_Max;                // Wert : 33-250
164
        unsigned char GyroAccFaktor;          // Wert : 1-64
165
        unsigned char KompassWirkung;         // Wert : 0-32
166
        unsigned char Gyro_P;                 // Wert : 10-250
167
        unsigned char Gyro_I;                 // Wert : 0-250
168
        unsigned char Gyro_D;                 // Wert : 0-250
1685 holgerb 169
        unsigned char Gyro_Gier_P;            // Wert : 10-250
170
        unsigned char Gyro_Gier_I;            // Wert : 0-250
171
        unsigned char Gyro_Stability;         // Wert : 0-16
1622 killagreg 172
        unsigned char UnterspannungsWarnung;  // Wert : 0-250
173
        unsigned char NotGas;                 // Wert : 0-250     //Gaswert bei Empängsverlust
174
        unsigned char NotGasZeit;             // Wert : 0-250     // Zeitbis auf NotGas geschaltet wird, wg. Rx-Problemen
1685 holgerb 175
        unsigned char Receiver;                   // 0= Summensignal, 1= Spektrum, 2 =Jeti, 3=ACT DSL, 4=ACT S3D
1622 killagreg 176
        unsigned char I_Faktor;               // Wert : 0-250
177
        unsigned char UserParam1;             // Wert : 0-250
178
        unsigned char UserParam2;             // Wert : 0-250
179
        unsigned char UserParam3;             // Wert : 0-250
180
        unsigned char UserParam4;             // Wert : 0-250
181
        unsigned char ServoNickControl;       // Wert : 0-250     // Stellung des Servos
182
        unsigned char ServoNickComp;          // Wert : 0-250     // Einfluss Gyro/Servo
183
        unsigned char ServoNickMin;           // Wert : 0-250     // Anschlag
184
        unsigned char ServoNickMax;           // Wert : 0-250     // Anschlag
185
        //--- Seit V0.75
186
        unsigned char ServoRollControl;       // Wert : 0-250     // Stellung des Servos
187
        unsigned char ServoRollComp;          // Wert : 0-250
188
        unsigned char ServoRollMin;           // Wert : 0-250
189
        unsigned char ServoRollMax;           // Wert : 0-250
190
        //---
191
        unsigned char ServoNickRefresh;       // Speed of the Servo
1761 killagreg 192
    unsigned char ServoManualControlSpeed;//
193
    unsigned char CamOrientation;         //
1622 killagreg 194
        unsigned char Servo3;                    // Value or mapping of the Servo Output
195
        unsigned char Servo4;                            // Value or mapping of the Servo Output
196
        unsigned char Servo5;                            // Value or mapping of the Servo Output
197
        unsigned char LoopGasLimit;           // Wert: 0-250  max. Gas während Looping
198
        unsigned char LoopThreshold;          // Wert: 0-250  Schwelle für Stickausschlag
199
        unsigned char LoopHysterese;          // Wert: 0-250  Hysterese für Stickausschlag
200
        unsigned char AchsKopplung1;          // Wert: 0-250  Faktor, mit dem Gier die Achsen Roll und Nick koppelt (NickRollMitkopplung)
201
        unsigned char AchsKopplung2;          // Wert: 0-250  Faktor, mit dem Nick und Roll verkoppelt werden
202
        unsigned char CouplingYawCorrection;  // Wert: 0-250  Faktor, mit dem Nick und Roll verkoppelt werden
203
        unsigned char WinkelUmschlagNick;     // Wert: 0-250  180°-Punkt
204
        unsigned char WinkelUmschlagRoll;     // Wert: 0-250  180°-Punkt
205
        unsigned char GyroAccAbgleich;        // 1/k  (Koppel_ACC_Wirkung)
206
        unsigned char Driftkomp;
207
        unsigned char DynamicStability;
208
        unsigned char UserParam5;             // Wert : 0-250
209
        unsigned char UserParam6;             // Wert : 0-250
210
        unsigned char UserParam7;             // Wert : 0-250
211
        unsigned char UserParam8;             // Wert : 0-250
212
        //---Output ---------------------------------------------
213
        unsigned char J16Bitmask;             // for the J16 Output
214
        unsigned char J16Timing;              // for the J16 Output
215
        unsigned char J17Bitmask;             // for the J17 Output
216
        unsigned char J17Timing;              // for the J17 Output
217
        // seit version V0.75c
218
        unsigned char WARN_J16_Bitmask;       // for the J16 Output
219
        unsigned char WARN_J17_Bitmask;       // for the J17 Output
220
        //---NaviCtrl---------------------------------------------
2440 holgerb 221
        unsigned char AutoPhotoDistance;      // Auto Photo
2342 holgerb 222
        unsigned char NaviGpsModeChannel;     // Parameters for the Naviboard
1622 killagreg 223
        unsigned char NaviGpsGain;
224
        unsigned char NaviGpsP;
225
        unsigned char NaviGpsI;
226
        unsigned char NaviGpsD;
227
        unsigned char NaviGpsPLimit;
228
        unsigned char NaviGpsILimit;
229
        unsigned char NaviGpsDLimit;
2344 holgerb 230
        unsigned char NaviGpsA;
1622 killagreg 231
        unsigned char NaviGpsMinSat;
232
        unsigned char NaviStickThreshold;
233
        unsigned char NaviWindCorrection;
1936 holgerb 234
        unsigned char NaviAccCompensation;    // New since 0.86 -> was: SpeedCompensation
2447 holgerb 235
        unsigned char NaviMaxFlyingRange;     // in 10m
1622 killagreg 236
        unsigned char NaviAngleLimitation;
237
        unsigned char NaviPH_LoginTime;
2447 holgerb 238
        unsigned char NaviDescendRange;
1622 killagreg 239
        //---Ext.Ctrl---------------------------------------------
1668 holgerb 240
        unsigned char ExternalControl;         // for serial Control
241
        //---CareFree---------------------------------------------
242
        unsigned char OrientationAngle;        // Where is the front-direction?
2342 holgerb 243
        unsigned char CareFreeChannel;     // switch for CareFree
1761 killagreg 244
    unsigned char MotorSafetySwitch;
1913 holgerb 245
    unsigned char MotorSmooth;
1915 holgerb 246
    unsigned char ComingHomeAltitude;
1916 holgerb 247
    unsigned char FailSafeTime;
1936 holgerb 248
    unsigned char MaxAltitude;
2008 holgerb 249
        unsigned char FailsafeChannel;         // if the value of this channel is > 100, the MK reports "RC-Lost"
2012 holgerb 250
        unsigned char ServoFilterNick;  
251
        unsigned char ServoFilterRoll;  
2443 holgerb 252
    unsigned char Servo3OnValue;
253
    unsigned char Servo3OffValue;
254
    unsigned char Servo4OnValue;
255
    unsigned char Servo4OffValue;
2340 holgerb 256
        unsigned char StartLandChannel;  
257
        unsigned char LandingSpeed;  
2390 holgerb 258
        unsigned char CompassOffset;        
259
        unsigned char AutoLandingVoltage;    // in 0,1V  0 -> disabled
2408 holgerb 260
        unsigned char ComingHomeVoltage;    // in 0,1V  0 -> disabled
2440 holgerb 261
        unsigned char AutoPhotoAtitudes;
262
        unsigned char SingleWpSpeed;
1622 killagreg 263
        //------------------------------------------------
264
        unsigned char BitConfig;          // (war Loop-Cfg) Bitcodiert: 0x01=oben, 0x02=unten, 0x04=links, 0x08=rechts / wird getrennt behandelt
2191 holgerb 265
        unsigned char ServoCompInvert;    // //  0x01 = Nick, 0x02 = Roll, 0x04 = relative moving // WICHTIG!!! am Ende lassen
1622 killagreg 266
        unsigned char ExtraConfig;        // bitcodiert
2008 holgerb 267
        unsigned char GlobalConfig3;      // bitcodiert
1622 killagreg 268
        char Name[12];
269
        unsigned char crc;                                // must be the last byte!
2480 holgerb 270
} paramset_t; // 134 bytes (V1.06)
1622 killagreg 271
 
272
#define  PARAMSET_STRUCT_LEN  sizeof(paramset_t)
273
 
274
extern paramset_t EE_Parameter;
275
 
1657 killagreg 276
extern uint8_t RAM_Checksum(uint8_t* pBuffer, uint16_t len);
277
 
1622 killagreg 278
extern void ParamSet_Init(void);
1761 killagreg 279
extern void SetDefaultParameter(uint8_t set, uint8_t restore_channels);
1657 killagreg 280
 
1622 killagreg 281
extern uint8_t ParamSet_ReadFromEEProm(uint8_t setnumber);
282
extern uint8_t ParamSet_WriteToEEProm(uint8_t setnumber);
283
 
284
extern uint8_t GetActiveParamSet(void);
285
extern void SetActiveParamSet(uint8_t setnumber);
286
 
287
extern uint8_t MixerTable_ReadFromEEProm(void);
288
extern uint8_t MixerTable_WriteToEEProm(void);
289
 
290
extern uint8_t GetParamByte(uint16_t param_id);
291
extern void SetParamByte(uint16_t param_id, uint8_t value);
292
extern uint16_t GetParamWord(uint16_t param_id);
293
extern void SetParamWord(uint16_t param_id, uint16_t value);
294
 
295
 
296
#endif //_EEPROM_H