Rev 119 | Rev 121 | Go to most recent revision | Details | Compare with Previous | Last modification | View Log | RSS feed
Rev | Author | Line No. | Line |
---|---|---|---|
119 | killagreg | 1 | /*#######################################################################################*/ |
2 | /* !!! THIS IS NOT FREE SOFTWARE !!! */ |
||
3 | /*#######################################################################################*/ |
||
4 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
5 | // + Copyright (c) 2008 Ingo Busker, Holger Buss |
||
6 | // + Nur für den privaten Gebrauch |
||
7 | // + FOR NON COMMERCIAL USE ONLY |
||
8 | // + www.MikroKopter.com |
||
9 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
10 | // + Es gilt für das gesamte Projekt (Hardware, Software, Binärfiles, Sourcecode und Dokumentation), |
||
11 | // + dass eine Nutzung (auch auszugsweise) nur für den privaten (nicht-kommerziellen) Gebrauch zulässig ist. |
||
12 | // + Sollten direkte oder indirekte kommerzielle Absichten verfolgt werden, ist mit uns (info@mikrokopter.de) Kontakt |
||
13 | // + bzgl. der Nutzungsbedingungen aufzunehmen. |
||
14 | // + Eine kommerzielle Nutzung ist z.B.Verkauf von MikroKoptern, Bestückung und Verkauf von Platinen oder Bausätzen, |
||
15 | // + Verkauf von Luftbildaufnahmen, usw. |
||
16 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
17 | // + Werden Teile des Quellcodes (mit oder ohne Modifikation) weiterverwendet oder veröffentlicht, |
||
18 | // + unterliegen sie auch diesen Nutzungsbedingungen und diese Nutzungsbedingungen incl. Copyright müssen dann beiliegen |
||
19 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
20 | // + Sollte die Software (auch auszugesweise) oder sonstige Informationen des MikroKopter-Projekts |
||
21 | // + auf anderen Webseiten oder sonstigen Medien veröffentlicht werden, muss unsere Webseite "http://www.mikrokopter.de" |
||
22 | // + eindeutig als Ursprung verlinkt werden |
||
23 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
24 | // + Keine Gewähr auf Fehlerfreiheit, Vollständigkeit oder Funktion |
||
25 | // + Benutzung auf eigene Gefahr |
||
26 | // + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden |
||
27 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
28 | // + Die PORTIERUNG der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur |
||
29 | // + mit unserer Zustimmung zulässig |
||
30 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
31 | // + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen |
||
32 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
33 | // + Redistributions of source code (with or without modifications) must retain the above copyright notice, |
||
34 | // + this list of conditions and the following disclaimer. |
||
35 | // + * Neither the name of the copyright holders nor the names of contributors may be used to endorse or promote products derived |
||
36 | // + from this software without specific prior written permission. |
||
37 | // + * The use of this project (hardware, software, binary files, sources and documentation) is only permitted |
||
38 | // + for non-commercial use (directly or indirectly) |
||
39 | // + Commercial use (for excample: selling of MikroKopters, selling of PCBs, assembly, ...) is only permitted |
||
40 | // + with our written permission |
||
41 | // + * If sources or documentations are redistributet on other webpages, out webpage (http://www.MikroKopter.de) must be |
||
42 | // + clearly linked as origin |
||
43 | // + * PORTING this software (or part of it) to systems (other than hardware from www.mikrokopter.de) is NOT allowed |
||
44 | // |
||
45 | // + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
||
46 | // + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
||
47 | // + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
||
48 | // + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
||
49 | // + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
||
50 | // + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
||
51 | // + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
||
52 | // + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
||
53 | // + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
||
54 | // + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
||
55 | // + POSSIBILITY OF SUCH DAMAGE. |
||
56 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
57 | #include "91x_lib.h" |
||
58 | #include "timer2.h" |
||
59 | #include "uart1.h" |
||
60 | |||
61 | #define CR1_OLVL1_MASK 0x0100 |
||
62 | #define CR1_OLVL2_MASK 0x0200 |
||
63 | |||
120 | killagreg | 64 | ServoParams_t ServoParams; |
65 | |||
66 | #define TIM2_FREQ 625000 // 625kHz, the same clock like at the FC |
||
119 | killagreg | 67 | // frame len 22.5 ms = 14063 * 1.6 us |
68 | // stop pulse: 0.3 ms = 188 * 1.6 us |
||
69 | // min servo pulse: 0.6 ms = 375 * 1.6 us |
||
70 | // max servo pulse: 2.4 ms = 1500 * 1.6 us |
||
71 | // resolution: 1500 - 375 = 1125 steps |
||
72 | #define PPM_STOPPULSE 188 |
||
73 | #define PPM_FRAMELEN 14063 |
||
120 | killagreg | 74 | //#define PPM_FRAMELEN (1757 * ServoParams.Refresh) // 22.5 ms / 8 Channels = 2.8125ms per Servo Channel |
119 | killagreg | 75 | #define MINSERVOPULSE 375 |
76 | #define MAXSERVOPULSE 1500 |
||
77 | #define SERVORANGE (MAXSERVOPULSE - MINSERVOPULSE) |
||
78 | |||
79 | //---------------------------------------------------------------------------------------------------- |
||
80 | void TIM2_IRQHandler(void) |
||
81 | { |
||
82 | //static s16 ServoValue1 = 0; |
||
83 | //static s16 ServoValue2 = 0; |
||
84 | static u16 LowPulseTime1 = PPM_FRAMELEN; |
||
85 | static u16 LowPulseTime2 = PPM_FRAMELEN; |
||
86 | |||
87 | u16 pulselen; |
||
88 | |||
89 | if(TIM_GetFlagStatus(TIM2, TIM_FLAG_OC1) == SET) |
||
90 | { |
||
91 | if (TIM2->CR1 & CR1_OLVL1_MASK) // start of high pulse |
||
92 | { |
||
93 | pulselen = MINSERVOPULSE + SERVORANGE/2; |
||
120 | killagreg | 94 | // input code for nick servo here |
119 | killagreg | 95 | LowPulseTime1 = PPM_FRAMELEN - pulselen; |
96 | TIM2->CR1 &= ~CR1_OLVL1_MASK; // make next a low pulse |
||
97 | } |
||
98 | else // start of low pulse |
||
99 | { |
||
100 | pulselen = LowPulseTime1; |
||
101 | TIM2->CR1 |= CR1_OLVL1_MASK; // make next a high pulse |
||
102 | } |
||
103 | TIM2->OC1R += pulselen; |
||
104 | TIM_ClearFlag(TIM2, TIM_FLAG_OC1); // clear irq pending bit |
||
105 | } |
||
106 | |||
107 | if(TIM_GetFlagStatus(TIM2, TIM_FLAG_OC2) == SET) |
||
108 | { |
||
109 | if (TIM2->CR1 & CR1_OLVL2_MASK) // was high pulse |
||
110 | { |
||
111 | pulselen = MINSERVOPULSE + SERVORANGE/2; |
||
120 | killagreg | 112 | // input code for roll servo here |
119 | killagreg | 113 | LowPulseTime2 = PPM_FRAMELEN - pulselen; |
120 | killagreg | 114 | TIM2->CR1 &= ~CR1_OLVL2_MASK; // make next a low pulse |
119 | killagreg | 115 | } |
116 | else |
||
117 | { |
||
118 | pulselen = LowPulseTime2; |
||
120 | killagreg | 119 | TIM2->CR1 |= CR1_OLVL2_MASK; // make next a high pulse |
119 | killagreg | 120 | } |
121 | TIM2->OC2R += pulselen; |
||
122 | TIM_ClearFlag(TIM2, TIM_FLAG_OC2); // clear irq pending bit |
||
123 | } |
||
124 | |||
125 | // write any value to VIC0 Vector address register |
||
126 | VIC0->VAR = 0xFF; |
||
127 | } |
||
128 | |||
129 | //---------------------------------------------------------------------------------------------------- |
||
130 | // Servo Timer |
||
131 | //---------------------------------------------------------------------------------------------------- |
||
132 | void TIMER2_Init(void) |
||
133 | { |
||
134 | GPIO_InitTypeDef GPIO_InitStructure; |
||
135 | TIM_InitTypeDef TIM_InitStructure; |
||
136 | |||
120 | killagreg | 137 | UART1_PutString("\r\n Timer2 init..."); |
119 | killagreg | 138 | |
139 | SCU_APBPeriphClockConfig(__GPIO6, ENABLE); // Enable the GPIO6 Clock |
||
140 | |||
141 | // configure the servo pins |
||
142 | GPIO_StructInit(&GPIO_InitStructure); |
||
143 | GPIO_InitStructure.GPIO_Direction = GPIO_PinOutput; |
||
144 | GPIO_InitStructure.GPIO_Pin = GPIO_Pin_4; |
||
145 | GPIO_InitStructure.GPIO_Type = GPIO_Type_PushPull ; |
||
146 | GPIO_InitStructure.GPIO_IPConnected = GPIO_IPConnected_Enable; |
||
147 | GPIO_InitStructure.GPIO_Alternate = GPIO_OutputAlt2; //TIM2_OCMP1 |
||
148 | GPIO_Init(GPIO6, &GPIO_InitStructure); |
||
149 | |||
150 | GPIO_StructInit(&GPIO_InitStructure); |
||
151 | GPIO_InitStructure.GPIO_Direction = GPIO_PinOutput; |
||
152 | GPIO_InitStructure.GPIO_Pin = GPIO_Pin_5; |
||
153 | GPIO_InitStructure.GPIO_Type = GPIO_Type_PushPull; |
||
154 | GPIO_InitStructure.GPIO_IPConnected = GPIO_IPConnected_Enable; |
||
155 | GPIO_InitStructure.GPIO_Alternate = GPIO_OutputAlt2; //TIM2_OCMP2 |
||
156 | GPIO_Init(GPIO6, &GPIO_InitStructure); |
||
157 | |||
158 | SCU_APBPeriphClockConfig(__TIM23, ENABLE); |
||
159 | |||
120 | killagreg | 160 | TIM_DeInit(TIM2); |
119 | killagreg | 161 | TIM_StructInit(&TIM_InitStructure); |
120 | killagreg | 162 | TIM_InitStructure.TIM_Mode = TIM_OCM_CHANNEL_12; // Output Compare Channels 1 & 2 Mode |
163 | TIM_InitStructure.TIM_OC1_Modes = TIM_WAVE; // OCMP1 pin is dedicated to the OC1 capability of the TIM |
||
164 | TIM_InitStructure.TIM_OC2_Modes = TIM_WAVE; // OCMP2 pin is dedicated to the OC2 capability of the TIM |
||
165 | TIM_InitStructure.TIM_Clock_Source = TIM_CLK_APB; // APB clock source is used |
||
166 | TIM_InitStructure.TIM_Pulse_Level_1 = TIM_LOW; // output low at OCMP1 pin on compare match |
||
167 | TIM_InitStructure.TIM_Pulse_Level_2 = TIM_LOW; // output low at OCMP2 pin on compare match |
||
119 | killagreg | 168 | TIM_InitStructure.TIM_Prescaler = (SCU_GetPCLKFreqValue() * 1000) / TIM2_FREQ; |
120 | killagreg | 169 | |
119 | killagreg | 170 | TIM_Init(TIM2, &TIM_InitStructure); |
171 | |||
120 | killagreg | 172 | TIM_ITConfig(TIM2, TIM_IT_OC1|TIM_IT_OC2, ENABLE); // enable interrupts for the OC 1 & 2 |
173 | TIM_CounterCmd(TIM2, TIM_START); // start the timer |
||
119 | killagreg | 174 | |
175 | VIC_Config(TIM2_ITLine, VIC_IRQ, 3); |
||
176 | VIC_ITCmd(TIM2_ITLine, ENABLE); |
||
177 | |||
178 | // set servo params to defaults |
||
179 | ServoParams.Refresh = 5; |
||
180 | ServoParams.NickOffset = 127; |
||
181 | ServoParams.NickComp = 40; |
||
182 | ServoParams.NickMin = 50; |
||
183 | ServoParams.NickMax = 205; |
||
184 | ServoParams.RollOffset = 127; |
||
185 | ServoParams.RollComp = 40; |
||
186 | ServoParams.RollMin = 50; |
||
187 | ServoParams.RollMax = 205; |
||
188 | |||
120 | killagreg | 189 | UART1_PutString("ok"); |
119 | killagreg | 190 | } |
191 |