Rev 531 | Go to most recent revision | Details | Compare with Previous | Last modification | View Log | RSS feed
Rev | Author | Line No. | Line |
---|---|---|---|
85 | killagreg | 1 | /*#######################################################################################*/ |
2 | /* !!! THIS IS NOT FREE SOFTWARE !!! */ |
||
3 | /*#######################################################################################*/ |
||
4 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
5 | // + www.MikroKopter.com |
||
6 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
360 | holgerb | 7 | // + Software Nutzungsbedingungen (english version: see below) |
8 | // + der Fa. HiSystems GmbH, Flachsmeerstrasse 2, 26802 Moormerland - nachfolgend Lizenzgeber genannt - |
||
9 | // + Der Lizenzgeber räumt dem Kunden ein nicht-ausschließliches, zeitlich und räumlich* unbeschränktes Recht ein, die im den |
||
489 | killagreg | 10 | // + Mikrocontroller verwendete Firmware für die Hardware Flight-Ctrl, Navi-Ctrl, BL-Ctrl, MK3Mag & PC-Programm MikroKopter-Tool |
360 | holgerb | 11 | // + - nachfolgend Software genannt - nur für private Zwecke zu nutzen. |
12 | // + Der Einsatz dieser Software ist nur auf oder mit Produkten des Lizenzgebers zulässig. |
||
85 | killagreg | 13 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
360 | holgerb | 14 | // + Die vom Lizenzgeber gelieferte Software ist urheberrechtlich geschützt. Alle Rechte an der Software sowie an sonstigen im |
15 | // + Rahmen der Vertragsanbahnung und Vertragsdurchführung überlassenen Unterlagen stehen im Verhältnis der Vertragspartner ausschließlich dem Lizenzgeber zu. |
||
16 | // + Die in der Software enthaltenen Copyright-Vermerke, Markenzeichen, andere Rechtsvorbehalte, Seriennummern sowie |
||
17 | // + sonstige der Programmidentifikation dienenden Merkmale dürfen vom Kunden nicht verändert oder unkenntlich gemacht werden. |
||
18 | // + Der Kunde trifft angemessene Vorkehrungen für den sicheren Einsatz der Software. Er wird die Software gründlich auf deren |
||
19 | // + Verwendbarkeit zu dem von ihm beabsichtigten Zweck testen, bevor er diese operativ einsetzt. |
||
20 | // + Die Haftung des Lizenzgebers wird - soweit gesetzlich zulässig - begrenzt in Höhe des typischen und vorhersehbaren |
||
489 | killagreg | 21 | // + Schadens. Die gesetzliche Haftung bei Personenschäden und nach dem Produkthaftungsgesetz bleibt unberührt. Dem Lizenzgeber steht jedoch der Einwand |
360 | holgerb | 22 | // + des Mitverschuldens offen. |
23 | // + Der Kunde trifft angemessene Vorkehrungen für den Fall, dass die Software ganz oder teilweise nicht ordnungsgemäß arbeitet. |
||
24 | // + Er wird die Software gründlich auf deren Verwendbarkeit zu dem von ihm beabsichtigten Zweck testen, bevor er diese operativ einsetzt. |
||
25 | // + Der Kunde wird er seine Daten vor Einsatz der Software nach dem Stand der Technik sichern. |
||
26 | // + Der Kunde ist darüber unterrichtet, dass der Lizenzgeber seine Daten im zur Vertragsdurchführung erforderlichen Umfang |
||
27 | // + und auf Grundlage der Datenschutzvorschriften erhebt, speichert, verarbeitet und, sofern notwendig, an Dritte übermittelt. |
||
28 | // + *) Die räumliche Nutzung bezieht sich nur auf den Einsatzort, nicht auf die Reichweite der programmierten Software. |
||
29 | // + #### ENDE DER NUTZUNGSBEDINGUNGEN ####' |
||
30 | // + Hinweis: Informationen über erweiterte Nutzungsrechte (wie z.B. Nutzung für nicht-private Zwecke) sind auf Anfrage per Email an info(@)hisystems.de verfügbar. |
||
85 | killagreg | 31 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
360 | holgerb | 32 | // + Software LICENSING TERMS |
85 | killagreg | 33 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
360 | holgerb | 34 | // + of HiSystems GmbH, Flachsmeerstrasse 2, 26802 Moormerland, Germany - the Licensor - |
489 | killagreg | 35 | // + The Licensor grants the customer a non-exclusive license to use the microcontroller firmware of the Flight-Ctrl, Navi-Ctrl, BL-Ctrl, and MK3Mag hardware |
360 | holgerb | 36 | // + (the Software) exclusively for private purposes. The License is unrestricted with respect to time and territory*. |
37 | // + The Software may only be used with the Licensor's products. |
||
38 | // + The Software provided by the Licensor is protected by copyright. With respect to the relationship between the parties to this |
||
39 | // + agreement, all rights pertaining to the Software and other documents provided during the preparation and execution of this |
||
40 | // + agreement shall be the property of the Licensor. |
||
41 | // + The information contained in the Software copyright notices, trademarks, other legal reservations, serial numbers and other |
||
42 | // + features that can be used to identify the program may not be altered or defaced by the customer. |
||
43 | // + The customer shall be responsible for taking reasonable precautions |
||
44 | // + for the safe use of the Software. The customer shall test the Software thoroughly regarding its suitability for the |
||
45 | // + intended purpose before implementing it for actual operation. The Licensor's liability shall be limited to the extent of typical and |
||
46 | // + foreseeable damage to the extent permitted by law, notwithstanding statutory liability for bodily injury and product |
||
47 | // + liability. However, the Licensor shall be entitled to the defense of contributory negligence. |
||
48 | // + The customer will take adequate precautions in the case, that the software is not working properly. The customer will test |
||
49 | // + the software for his purpose before any operational usage. The customer will backup his data before using the software. |
||
50 | // + The customer understands that the Licensor collects, stores and processes, and, where required, forwards, customer data |
||
51 | // + to third parties to the extent necessary for executing the agreement, subject to applicable data protection and privacy regulations. |
||
52 | // + *) The territory aspect only refers to the place where the Software is used, not its programmed range. |
||
53 | // + #### END OF LICENSING TERMS #### |
||
54 | // + Note: For information on license extensions (e.g. commercial use), please contact us at info(@)hisystems.de. |
||
85 | killagreg | 55 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
56 | #include <stdlib.h> |
||
57 | #include <stdio.h> |
||
58 | #include "91x_lib.h" |
||
59 | #include "gpx.h" |
||
60 | #include "gpx_header.h" |
||
119 | killagreg | 61 | #include "timer1.h" |
86 | killagreg | 62 | #include "spi_slave.h" |
63 | #include "main.h" |
||
64 | #include "uart1.h" |
||
338 | holgerb | 65 | #include "compass.h" |
66 | #include "analog.h" |
||
67 | #include "main.h" |
||
68 | #include "led.h" |
||
351 | holgerb | 69 | #include "timer2.h" |
380 | holgerb | 70 | #include "logging.h" |
532 | holgerb | 71 | #include "ncmag.h" |
85 | killagreg | 72 | |
73 | //________________________________________________________________________________________________________________________________________ |
||
74 | // Function: GPX_DocumentInit(GPX_Document_t *) |
||
75 | // |
||
76 | // Description: This function initializes the gpx-document for further use. |
||
77 | // |
||
78 | // |
||
79 | // Returnvalue: '1' if document was initialized |
||
80 | //________________________________________________________________________________________________________________________________________ |
||
81 | |||
82 | u8 GPX_DocumentInit(GPX_Document_t *doc) |
||
83 | { |
||
84 | if(doc->state != GPX_DOC_CLOSED) GPX_DocumentClose(doc); // close file if it was opened before |
||
85 | doc->state = GPX_DOC_CLOSED; // init state of the gpx-document |
||
86 | doc->file = NULL; |
||
87 | return(1); |
||
88 | } |
||
89 | |||
90 | //________________________________________________________________________________________________________________________________________ |
||
91 | // Function: GPX_Document_Open(s8 *name, GPX_Document_t *doc); |
||
92 | // |
||
93 | // Description: This function opens a new gpx-document with the specified name and creates the document header within the file. |
||
94 | // |
||
95 | // |
||
96 | // Returnvalue: '1' if the gpx-file could be created. |
||
97 | //________________________________________________________________________________________________________________________________________ |
||
98 | |||
338 | holgerb | 99 | |
85 | killagreg | 100 | u8 GPX_DocumentOpen(s8 *name, GPX_Document_t *doc) |
101 | { |
||
532 | holgerb | 102 | s8 string[200]; |
85 | killagreg | 103 | u8 retvalue = 0; |
530 | holgerb | 104 | u8 BLv = 1; |
532 | holgerb | 105 | LicenseS_t *tmp_license; |
106 | tmp_license = (LicenseS_t *) LicensePtr; |
||
85 | killagreg | 107 | |
108 | if(doc == NULL) return(0); |
||
109 | GPX_DocumentInit(doc); // intialize the document with resetvalues |
||
110 | doc->file = fopen_(name,'a'); // open a new file with the specified filename on the memorycard. |
||
111 | |||
530 | holgerb | 112 | if(Motor_Version[0] & MOTOR_STATE_BL30) BLv = 3; |
113 | else if(Motor_Version[0] & MOTOR_STATE_NEW_PROTOCOL_MASK) BLv = 2; |
||
114 | |||
85 | killagreg | 115 | if(doc->file != NULL) // could the file be opened? |
116 | { |
||
117 | retvalue = 1; // the document could be created on the drive. |
||
118 | doc->state = GPX_DOC_OPENED; // change document state to opened. At next a placemark has to be opened. |
||
338 | holgerb | 119 | fwrite_((void*)GPX_DOCUMENT_HEADER1, sizeof(GPX_DOCUMENT_HEADER1)-1,1,doc->file);// write the gpx-header to the document. |
530 | holgerb | 120 | sprintf(string, "<desc>FC HW:%d.%d SW:%d.%02d%c + NC HW:%d.%d SW:%d.%02d%c BL:V%d", (FC_Version.Hardware & 0x7F)/10,(FC_Version.Hardware & 0x7F)%10, FC_Version.Major, FC_Version.Minor, 'a'+FC_Version.Patch, UART_VersionInfo.HWMajor/10, UART_VersionInfo.HWMajor%10, VERSION_MAJOR, VERSION_MINOR, 'a'+ VERSION_PATCH,BLv); |
338 | holgerb | 121 | fputs_(string, doc->file); |
530 | holgerb | 122 | if(FC.RedundanceBlOperation) sprintf(string, " (Redundant)</desc>\r\n"); |
123 | else sprintf(string, "</desc>\r\n"); |
||
124 | fputs_(string, doc->file); |
||
532 | holgerb | 125 | sprintf(string, "<extensions>\r\n"); fputs_(string, doc->file); |
126 | sprintf(string, "<MK_Time>%imin</MK_Time>\r\n",FlugMinutenGesamt);fputs_(string, doc->file); |
||
127 | sprintf(string, "<License>\r\n"); fputs_(string, doc->file); |
||
128 | if(tmp_license->User[0] != 0) |
||
129 | { |
||
130 | sprintf(string, "<name>%s</name>\r\n",tmp_license->User); fputs_(string, doc->file); |
||
131 | sprintf(string, "<email>%s</email>\r\n",tmp_license->eMail); fputs_(string, doc->file); |
||
132 | sprintf(string, "<features>%s</features>\r\n",tmp_license->Feature); fputs_(string, doc->file); |
||
133 | sprintf(string, "<expires>%s</expires>\r\n",tmp_license->Expire);fputs_(string, doc->file); |
||
134 | } |
||
135 | else |
||
136 | { |
||
137 | sprintf(string, "<info>No License installed</info>\r\n"); fputs_(string, doc->file); |
||
138 | } |
||
139 | sprintf(string, "</License>\r\n"); fputs_(string, doc->file); |
||
140 | sprintf(string, "<settings>\r\n"); fputs_(string, doc->file); |
||
141 | sprintf(string, "<Number>%i</Number>\r\n",Parameter.ActiveSetting);fputs_(string, doc->file); |
||
142 | sprintf(string, "<CompassOffset>%i</CompassOffset>\r\n",FC.FromFC_CompassOffset/10);fputs_(string, doc->file); |
||
143 | sprintf(string, "<FCOrientation>%i</FCOrientation>\r\n",Parameter.OrientationAngle*15);fputs_(string, doc->file); |
||
144 | sprintf(string, "<GeoMag>%i</GeoMag>\r\n",GeoMagDec/10);fputs_(string, doc->file); |
||
145 | if(Compass_I2CPort == NCMAG_PORT_EXTERN) sprintf(string, "<MagSensor>external (%i)</MagSensor>\r\n",NCMAG_Orientation); |
||
146 | else sprintf(string, "<MagSensor>internal</MagSensor>\r\n");fputs_(string, doc->file); |
||
147 | if(AbsoluteFlyingAltitude) {sprintf(string, "<MaxAltitude>%i</MaxAltitude>\r\n",AbsoluteFlyingAltitude);fputs_(string, doc->file);} |
||
148 | if(AbsoluteFlyingRange_m) {sprintf(string, "<FlyRange>%i</FlyRange>\r\n",AbsoluteFlyingRange_m);fputs_(string, doc->file);} |
||
149 | if(AutoDescendRange_m) {sprintf(string, "<Descend>%i</Descend>\r\n",AutoDescendRange_m);fputs_(string, doc->file);}; |
||
150 | sprintf(string, "<Bytes>%02x,%02x,%02x</Bytes>\r\n",Parameter.GlobalConfig,Parameter.ExtraConfig,Parameter.GlobalConfig3);fputs_(string, doc->file); |
||
151 | sprintf(string, "</settings>\r\n"); fputs_(string, doc->file); |
||
152 | sprintf(string, "</extensions>\r\n"); fputs_(string, doc->file); |
||
153 | |||
154 | fwrite_((void*)GPX_DOCUMENT_METADATA_END, sizeof(GPX_DOCUMENT_METADATA_END)-1,1,doc->file);// write the gpx-header to the document. |
||
85 | killagreg | 155 | } |
338 | holgerb | 156 | Logging_FCStatusFlags1 = 0; |
157 | Logging_FCStatusFlags2 = 0; |
||
380 | holgerb | 158 | Logged_GPX_Counter = 0; |
436 | holgerb | 159 | LogFC_WP_EventChannel = 0; |
530 | holgerb | 160 | Logging_BL_MinOfMaxPWM = BL_MinOfMaxPWM; |
85 | killagreg | 161 | return(retvalue); |
162 | } |
||
163 | |||
164 | //________________________________________________________________________________________________________________________________________ |
||
165 | // Function: DocumentClose(GPX_Document_t *doc); |
||
166 | // |
||
167 | // Description: This function closes the document specified by doc. |
||
168 | // |
||
169 | // |
||
170 | // Returnvalue: '1' if the gpx-file could be closed. |
||
171 | //________________________________________________________________________________________________________________________________________ |
||
172 | |||
173 | u8 GPX_DocumentClose(GPX_Document_t *doc) |
||
174 | { |
||
175 | |||
176 | u8 retvalue = 1; |
||
177 | |||
178 | if(doc == NULL) return(0); |
||
179 | |||
378 | holgerb | 180 | while(doc->state != GPX_DOC_CLOSED) // close linestring, placemark and document before closing the file on the memorycard |
94 | killagreg | 181 | { |
85 | killagreg | 182 | switch(doc->state) |
183 | { |
||
184 | case GPX_DOC_TRACKSEGMENT_OPENED: |
||
185 | GPX_TrackSegmentEnd(doc); // write terminating tag to end tracksegment. |
||
186 | break; |
||
187 | |||
104 | killagreg | 188 | case GPX_DOC_TRACK_OPENED: // write terminating tag to close track. |
85 | killagreg | 189 | GPX_TrackEnd(doc); |
190 | break; |
||
191 | |||
192 | case GPX_DOC_OPENED: // close the file on the memorycard |
||
193 | if(doc->file != NULL) |
||
194 | { |
||
195 | fwrite_((void*)GPX_DOCUMENT_FOOTER, sizeof(GPX_DOCUMENT_FOOTER)-1,1,doc->file); // write the gpx-footer to the document. |
||
196 | fclose_(doc->file); |
||
197 | retvalue = 1; |
||
198 | } |
||
199 | doc->state = GPX_DOC_CLOSED; |
||
200 | break; |
||
201 | |||
202 | default: |
||
203 | doc->state = GPX_DOC_CLOSED; |
||
204 | break; |
||
205 | } |
||
206 | } |
||
207 | return(retvalue); |
||
208 | } |
||
209 | |||
338 | holgerb | 210 | |
211 | |||
85 | killagreg | 212 | //________________________________________________________________________________________________________________________________________ |
213 | // Function: u8 GPX_TrackBegin(GPX_Document_t); |
||
214 | // |
||
215 | // Description: This function adds a track to the document. |
||
216 | // |
||
217 | // |
||
218 | // Returnvalue: '1' if the track could be opened |
||
219 | //________________________________________________________________________________________________________________________________________ |
||
220 | |||
221 | u8 GPX_TrackBegin(GPX_Document_t *doc) |
||
222 | { |
||
223 | |||
224 | u8 retvalue = 0; |
||
225 | if(doc->state == GPX_DOC_OPENED) |
||
226 | { |
||
227 | if(doc->file != NULL) |
||
228 | { |
||
229 | doc->state = GPX_DOC_TRACK_OPENED; |
||
230 | retvalue = 1; |
||
231 | fwrite_((void*)GPX_TRACK_HEADER, sizeof(GPX_TRACK_HEADER)-1,1,doc->file); |
||
232 | } |
||
233 | } |
||
234 | return(retvalue); |
||
235 | } |
||
236 | |||
338 | holgerb | 237 | |
85 | killagreg | 238 | //________________________________________________________________________________________________________________________________________ |
239 | // Function: u8 GPX_TrackEnd(KML_Document_t *doc) |
||
240 | // |
||
241 | // Description: This function ends the track opened before. |
||
242 | // |
||
243 | // |
||
244 | // Returnvalue: 1' if the track could be closed |
||
245 | //________________________________________________________________________________________________________________________________________ |
||
246 | |||
247 | u8 GPX_TrackEnd(GPX_Document_t *doc) |
||
248 | { |
||
249 | |||
250 | u8 retvalue = 0; |
||
251 | |||
252 | if(doc->state == GPX_DOC_TRACK_OPENED) |
||
253 | { |
||
254 | if(doc->file != NULL) |
||
255 | { |
||
256 | doc->state = GPX_DOC_OPENED; |
||
257 | fwrite_((void*)GPX_TRACK_FOOTER, sizeof(GPX_TRACK_FOOTER)-1,1,doc->file); |
||
258 | retvalue = 1; |
||
259 | } |
||
260 | } |
||
261 | |||
262 | return(retvalue); |
||
263 | } |
||
264 | |||
265 | //________________________________________________________________________________________________________________________________________ |
||
266 | // Function: u8 GPX_TrackSegmentBegin(GPX_Document_t *doc); |
||
267 | // |
||
268 | // Description: This function starts a track segment. |
||
269 | // |
||
270 | // |
||
271 | // Returnvalue: '1' if the track segement could be started |
||
272 | //________________________________________________________________________________________________________________________________________ |
||
273 | |||
274 | u8 GPX_TrackSegmentBegin(GPX_Document_t *doc) |
||
275 | { |
||
276 | |||
277 | u8 retvalue = 0; |
||
278 | |||
279 | if(doc->state == GPX_DOC_TRACK_OPENED) |
||
280 | { |
||
281 | if(doc->file != NULL) |
||
282 | { |
||
283 | doc->state = GPX_DOC_TRACKSEGMENT_OPENED; |
||
284 | fwrite_((void*)GPX_TRACKSEGMENT_HEADER, sizeof(GPX_TRACKSEGMENT_HEADER)-1,1,doc->file); |
||
285 | retvalue = 1; |
||
286 | } |
||
287 | } |
||
288 | return(retvalue); |
||
289 | } |
||
290 | |||
291 | //________________________________________________________________________________________________________________________________________ |
||
292 | // Function: u8 GPX_TrackSegmentEnd(GPX_Document_t *doc); |
||
293 | // |
||
294 | // Description: This function ends the tracksegment opened before. |
||
295 | // |
||
296 | // |
||
297 | // Returnvalue: '1' if the track segment could be terminated |
||
298 | //________________________________________________________________________________________________________________________________________ |
||
299 | |||
300 | u8 GPX_TrackSegmentEnd(GPX_Document_t *doc) |
||
301 | { |
||
302 | |||
303 | u8 retvalue = 0; |
||
304 | if(doc->state == GPX_DOC_TRACKSEGMENT_OPENED) |
||
305 | { |
||
306 | if(doc->file != NULL) |
||
307 | { |
||
308 | doc->state = GPX_DOC_TRACK_OPENED; |
||
309 | fwrite_((void*)GPX_TRACKSEGMENT_FOOTER, sizeof(GPX_TRACKSEGMENT_FOOTER)-1,1,doc->file); |
||
310 | retvalue = 1; |
||
311 | } |
||
312 | } |
||
313 | return(retvalue); |
||
314 | } |
||
315 | |||
316 | //________________________________________________________________________________________________________________________________________ |
||
317 | // Function: u8 GPX_TrackSegementAddPoint(GPS_Pos_t * pGPS_Position ,GPX_Document_t *doc); |
||
318 | // |
||
319 | // Description: This function adds a pointof a track segement to the specified document. |
||
320 | // |
||
321 | // |
||
322 | // Returnvalue: '1' if a point was added |
||
323 | //________________________________________________________________________________________________________________________________________ |
||
324 | |||
345 | holgerb | 325 | u8 GPX_TrackSegementAddPoint(GPX_Document_t *doc,unsigned char part) |
85 | killagreg | 326 | { |
327 | |||
328 | u8 retvalue = 0; |
||
530 | holgerb | 329 | s8 string[120]; |
386 | holgerb | 330 | s8 name[] = "----\0"; |
85 | killagreg | 331 | |
332 | if(doc == NULL) return(0); |
||
333 | |||
434 | holgerb | 334 | // if((GPSData.Position.Status != INVALID) && (NaviData.HomePosition.Status != INVALID)) |
85 | killagreg | 335 | { |
336 | if(doc->state == GPX_DOC_TRACKSEGMENT_OPENED) |
||
337 | { |
||
338 | if(doc->file != NULL) |
||
339 | { |
||
86 | killagreg | 340 | s32 i32_1, i32_2; |
341 | s16 i16_1; |
||
342 | u8 u8_1, u8_2; |
||
85 | killagreg | 343 | // write <trkpt> tag |
345 | holgerb | 344 | switch(part) |
345 | { |
||
346 | case 0: |
||
380 | holgerb | 347 | Logged_GPX_Counter++; |
434 | holgerb | 348 | if(GPSData.Position.Status != INVALID) |
349 | { |
||
350 | if(GPSData.Position.Latitude < 0) u8_1 = '-'; |
||
351 | else u8_1 = '+'; |
||
352 | i32_1 = abs(GPSData.Position.Latitude)/10000000L; |
||
353 | i32_2 = abs(GPSData.Position.Latitude)%10000000L; |
||
354 | sprintf(string, "<trkpt lat=\"%c%ld.%07ld\" ",u8_1, i32_1, i32_2); |
||
355 | fputs_(string, doc->file); |
||
356 | if(GPSData.Position.Longitude < 0) u8_1 = '-'; |
||
357 | else u8_1 = '+'; |
||
358 | i32_1 = abs(GPSData.Position.Longitude)/10000000L; |
||
359 | i32_2 = abs(GPSData.Position.Longitude)%10000000L; |
||
360 | sprintf(string, "lon=\"%c%ld.%07ld\">\r\n",u8_1, i32_1, i32_2); |
||
436 | holgerb | 361 | } else sprintf(string, "<trkpt lat=\"\" lon=\"\">"); |
434 | holgerb | 362 | fputs_(string, doc->file); |
345 | holgerb | 363 | break; |
364 | case 1: |
||
85 | killagreg | 365 | // write <ele> taga |
215 | killagreg | 366 | i32_2 = GPSData.Position.Altitude - NaviData.HomePosition.Altitude; |
436 | holgerb | 367 | if(GPSData.Position.Status == INVALID) i32_2 = 0; |
86 | killagreg | 368 | if(i32_2 < 0) i32_2 = 0; // avoid negative altitudes in log |
369 | i32_1 = i32_2/1000L; |
||
370 | i32_2 = i32_2%1000L; |
||
371 | sprintf(string,"<ele>%ld.%03ld</ele>\r\n",i32_1, i32_2); |
||
85 | killagreg | 372 | fputs_(string, doc->file); |
373 | // write <time> tag only at a resolution of one second |
||
531 | holgerb | 374 | // sprintf(string, "<time>%04d-%02d-%02dT%02d:%02d:%02dZ</time>\r\n",SystemTime.Year, SystemTime.Month, SystemTime.Day, SystemTime.Hour, SystemTime.Min, SystemTime.Sec); |
375 | sprintf(string, "<time>%04d-%02d-%02dT%02d:%02d:%02d.%dZ</time>\r\n",SystemTime.Year, SystemTime.Month, SystemTime.Day, SystemTime.Hour, SystemTime.Min, SystemTime.Sec,SystemTime.mSec/100); |
||
85 | killagreg | 376 | fputs_(string, doc->file); |
86 | killagreg | 377 | // write <sat> tag |
378 | sprintf(string, "<sat>%d</sat>\r\n", NaviData.SatsInUse); |
||
379 | fputs_(string, doc->file); |
||
94 | killagreg | 380 | // todo: add <extensions> tag with additional data to be logged |
86 | killagreg | 381 | sprintf(string, "<extensions>\r\n"); |
382 | fputs_(string, doc->file); |
||
345 | holgerb | 383 | break; |
384 | case 2: |
||
419 | holgerb | 385 | // Flight duration |
386 | sprintf(string, "<FlightTime>%d</FlightTime>\r\n", NaviData.FlyingTime); |
||
387 | fputs_(string, doc->file); |
||
388 | // Status of the complete MikroKopter |
||
389 | sprintf(string, "<ErrorCode>%03d</ErrorCode>\r\n",ErrorCode); |
||
390 | fputs_(string, doc->file); |
||
391 | // Flags |
||
392 | sprintf(string, "<FCFlags2>0x%02x,0x%02x</FCFlags2>\r\n",Logging_FCStatusFlags1,Logging_FCStatusFlags2); |
||
393 | fputs_(string, doc->file); |
||
428 | holgerb | 394 | Logging_FCStatusFlags1 = FC.StatusFlags; |
395 | Logging_FCStatusFlags2 = FC.StatusFlags2; |
||
419 | holgerb | 396 | // NC Mode (contains the status) |
397 | sprintf(string, "<NCFlag>0x%02X</NCFlag>\r\n", NCFlags); |
||
398 | fputs_(string, doc->file); |
||
125 | killagreg | 399 | // Altimeter according to air pressure |
436 | holgerb | 400 | sprintf(string, "<Speak>%d</Speak>\r\n",FC.FromFC_SpeakHoTT); |
401 | FC.FromFC_SpeakHoTT = 0; // can be cleared now |
||
402 | fputs_(string, doc->file); |
||
403 | // Altimeter according to air pressure |
||
338 | holgerb | 404 | sprintf(string, "<Altimeter>%d,'%c'</Altimeter>\r\n", NaviData.Altimeter,FromFC_VarioCharacter); |
126 | killagreg | 405 | fputs_(string, doc->file); |
140 | killagreg | 406 | // Variometer according to air pressure |
407 | sprintf(string, "<Variometer>%d</Variometer>\r\n", NaviData.Variometer); |
||
408 | fputs_(string, doc->file); |
||
345 | holgerb | 409 | break; |
410 | case 3: |
||
86 | killagreg | 411 | // Ubat |
412 | u8_1 = NaviData.UBat / 10; |
||
413 | u8_2 = NaviData.UBat % 10; |
||
414 | sprintf(string, "<Voltage>%d.%01d</Voltage>\r\n", u8_1, u8_2); |
||
415 | fputs_(string, doc->file); |
||
206 | killagreg | 416 | // Current |
417 | u8_1 = NaviData.Current / 10; |
||
418 | u8_2 = NaviData.Current % 10; |
||
419 | sprintf(string, "<Current>%d.%01d</Current>\r\n", u8_1, u8_2); |
||
420 | fputs_(string, doc->file); |
||
421 | // Capacity |
||
422 | sprintf(string, "<Capacity>%d</Capacity>\r\n", NaviData.UsedCapacity); |
||
423 | fputs_(string, doc->file); |
||
345 | holgerb | 424 | break; |
425 | case 4: |
||
419 | holgerb | 426 | /* if(FC.RC_RSSI) |
414 | holgerb | 427 | { |
428 | sprintf(string, "<RCRSSI>%d</RCRSSI>\r\n", FC.RC_RSSI); |
||
429 | fputs_(string, doc->file); |
||
430 | } |
||
419 | holgerb | 431 | */ // Compassind deg |
86 | killagreg | 432 | i16_1 = FromFlightCtrl.GyroHeading / 10; |
510 | holgerb | 433 | sprintf(string, "<Compass>%03d,%03d,%03d,%03d</Compass>\r\n", i16_1,ToFlightCtrl.CompassHeading,CompassSetpointCorrected/10,GyroCompassCorrected/10); |
86 | killagreg | 434 | fputs_(string, doc->file); |
489 | killagreg | 435 | // magnetic field |
419 | holgerb | 436 | sprintf(string, "<MagnetField>%03d</MagnetField>\r\n",(u16) (EarthMagneticFieldFiltered/5)); |
437 | fputs_(string, doc->file); |
||
489 | killagreg | 438 | // magnetic inclination & error |
419 | holgerb | 439 | sprintf(string, "<MagnetInclination>%02d,%02d</MagnetInclination>\r\n",(s16)EarthMagneticInclinationFiltered/10,(s16)(EarthMagneticInclinationFiltered/10 - EarthMagneticInclinationTheoretic)); |
440 | fputs_(string, doc->file); |
||
92 | killagreg | 441 | // Nick Angle ind deg |
531 | holgerb | 442 | i16_1 = abs(FromFlightCtrl.AngleNick); |
443 | if(FromFlightCtrl.AngleNick < 0) sprintf(string, "<NickAngle>-%d.%d</NickAngle>\r\n",i16_1/10,i16_1%10); |
||
444 | else sprintf(string, "<NickAngle>%d.%d</NickAngle>\r\n",i16_1/10,i16_1%10); |
||
86 | killagreg | 445 | fputs_(string, doc->file); |
92 | killagreg | 446 | // Roll Angle in deg |
531 | holgerb | 447 | i16_1 = abs(FromFlightCtrl.AngleRoll); |
448 | if(FromFlightCtrl.AngleRoll < 0) sprintf(string, "<RollAngle>-%d.%d</RollAngle>\r\n",i16_1/10,i16_1%10); |
||
449 | else sprintf(string, "<RollAngle>%d.%d</RollAngle>\r\n",i16_1/10,i16_1%10); |
||
86 | killagreg | 450 | fputs_(string, doc->file); |
345 | holgerb | 451 | break; |
452 | case 5: |
||
338 | holgerb | 453 | // BL Information |
530 | holgerb | 454 | switch(AmountOfMotors) |
455 | { |
||
456 | case 4: |
||
457 | sprintf(string, "<MotorCurrent>%d,%d,%d,%d</MotorCurrent>\r\n",BL3_Current(0),BL3_Current(1),BL3_Current(2),BL3_Current(3)); |
||
458 | fputs_(string, doc->file); |
||
459 | sprintf(string, "<BL_Temperature>%d,%d,%d,%d</BL_Temperature>\r\n",Motor[0].Temperature,Motor[1].Temperature,Motor[2].Temperature,Motor[3].Temperature); |
||
460 | fputs_(string, doc->file); |
||
461 | sprintf(string, "<MotorNOK>%d,%d,%d,%d</MotorNOK>\r\n",Motor[0].NotReadyCnt,Motor[1].NotReadyCnt,Motor[2].NotReadyCnt,Motor[3].NotReadyCnt); |
||
462 | fputs_(string, doc->file); |
||
463 | break; |
||
464 | case 6: |
||
465 | sprintf(string, "<MotorCurrent>%d,%d,%d,%d,%d,%d</MotorCurrent>\r\n",BL3_Current(0),BL3_Current(1),BL3_Current(2),BL3_Current(3),BL3_Current(4),BL3_Current(5)); |
||
466 | fputs_(string, doc->file); |
||
467 | sprintf(string, "<BL_Temperature>%d,%d,%d,%d,%d,%d</BL_Temperature>\r\n",Motor[0].Temperature,Motor[1].Temperature,Motor[2].Temperature,Motor[3].Temperature,Motor[4].Temperature,Motor[5].Temperature); |
||
468 | fputs_(string, doc->file); |
||
469 | sprintf(string, "<MotorNOK>%d,%d,%d,%d,%d,%d</MotorNOK>\r\n",Motor[0].NotReadyCnt,Motor[1].NotReadyCnt,Motor[2].NotReadyCnt,Motor[3].NotReadyCnt,Motor[4].NotReadyCnt,Motor[5].NotReadyCnt); |
||
470 | fputs_(string, doc->file); |
||
471 | break; |
||
472 | case 8: |
||
473 | sprintf(string, "<MotorCurrent>%d,%d,%d,%d,%d,%d,%d,%d</MotorCurrent>\r\n",BL3_Current(0),BL3_Current(1),BL3_Current(2),BL3_Current(3),BL3_Current(4),BL3_Current(5),BL3_Current(6),BL3_Current(7)); |
||
474 | fputs_(string, doc->file); |
||
475 | sprintf(string, "<BL_Temperature>%d,%d,%d,%d,%d,%d,%d,%d</BL_Temperature>\r\n",Motor[0].Temperature,Motor[1].Temperature,Motor[2].Temperature,Motor[3].Temperature,Motor[4].Temperature,Motor[5].Temperature,Motor[6].Temperature,Motor[7].Temperature); |
||
476 | fputs_(string, doc->file); |
||
477 | sprintf(string, "<MotorNOK>%d,%d,%d,%d,%d,%d,%d,%d</MotorNOK>\r\n",Motor[0].NotReadyCnt,Motor[1].NotReadyCnt,Motor[2].NotReadyCnt,Motor[3].NotReadyCnt,Motor[4].NotReadyCnt,Motor[5].NotReadyCnt,Motor[6].NotReadyCnt,Motor[7].NotReadyCnt); |
||
478 | fputs_(string, doc->file); |
||
479 | break; |
||
480 | default: |
||
481 | sprintf(string, "<MotorCurrent>%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d</MotorCurrent>\r\n",BL3_Current(0),BL3_Current(1),BL3_Current(2),BL3_Current(3),BL3_Current(4),BL3_Current(5),BL3_Current(6),BL3_Current(7),BL3_Current(8),BL3_Current(9),BL3_Current(10),BL3_Current(11)); |
||
482 | fputs_(string, doc->file); |
||
483 | sprintf(string, "<BL_Temperature>%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d</BL_Temperature>\r\n",Motor[0].Temperature,Motor[1].Temperature,Motor[2].Temperature,Motor[3].Temperature,Motor[4].Temperature,Motor[5].Temperature,Motor[6].Temperature,Motor[7].Temperature,Motor[8].Temperature,Motor[9].Temperature,Motor[10].Temperature,Motor[11].Temperature); |
||
484 | fputs_(string, doc->file); |
||
485 | sprintf(string, "<MotorNOK>%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d</MotorNOK>\r\n",Motor[0].NotReadyCnt,Motor[1].NotReadyCnt,Motor[2].NotReadyCnt,Motor[3].NotReadyCnt,Motor[4].NotReadyCnt,Motor[5].NotReadyCnt,Motor[6].NotReadyCnt,Motor[7].NotReadyCnt,Motor[8].NotReadyCnt,Motor[9].NotReadyCnt,Motor[10].NotReadyCnt,Motor[11].NotReadyCnt); |
||
486 | fputs_(string, doc->file); |
||
487 | break; |
||
488 | } |
||
345 | holgerb | 489 | break; |
490 | case 6: |
||
358 | holgerb | 491 | /* sprintf(string, "<BL_State>0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x</BL_State>\r\n",Motor.State[0],Motor.State[1],Motor.State[2],Motor.State[3],Motor.State[4],Motor.State[5],Motor.State[6],Motor.State[7],Motor.State[8],Motor.State[9],Motor.State[10],Motor.State[11]); |
338 | holgerb | 492 | fputs_(string, doc->file); |
358 | holgerb | 493 | sprintf(string, "<BL_MaxPWM>%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d</BL_MaxPWM>\r\n",Motor.MaxPWM[0],Motor.MaxPWM[1],Motor.MaxPWM[2],Motor.MaxPWM[3],Motor.MaxPWM[4],Motor.MaxPWM[5],Motor.MaxPWM[6],Motor.MaxPWM[7],Motor.MaxPWM[8],Motor.MaxPWM[9],Motor.MaxPWM[10],Motor.MaxPWM[11]); |
494 | fputs_(string, doc->file); |
||
530 | holgerb | 495 | */ sprintf(string, "<AvaiableMotorPower>%03d</AvaiableMotorPower>\r\n",Logging_BL_MinOfMaxPWM); |
496 | Logging_BL_MinOfMaxPWM = BL_MinOfMaxPWM; |
||
358 | holgerb | 497 | fputs_(string, doc->file); |
338 | holgerb | 498 | sprintf(string, "<FC_I2C_ErrorCounter>%03d</FC_I2C_ErrorCounter>\r\n",(s16)FC_I2C_ErrorConter); |
499 | fputs_(string, doc->file); |
||
419 | holgerb | 500 | sprintf(string, "<FC_SPI_ErrorCounter>%03d</FC_SPI_ErrorCounter>\r\n",(s16)DebugOut.Analog[12]); |
501 | fputs_(string, doc->file); |
||
338 | holgerb | 502 | // Analog inputs of the NC |
503 | sprintf(string, "<AnalogInputs>%d,%d,%d,%d</AnalogInputs>\r\n",AnalogData.Ch4,AnalogData.Ch5,AnalogData.Ch6,AnalogData.Ch7); |
||
504 | fputs_(string, doc->file); |
||
351 | holgerb | 505 | sprintf(string, "<Servo>%d,%d,%d</Servo>\r\n", ServoParams.NickControl,ServoParams.RollControl,POI_KameraNick/10); // Raw Poti-Values of the Servo control and the POI_Nick in 1° |
506 | fputs_(string, doc->file); |
||
386 | holgerb | 507 | |
508 | if(GPS_pWaypoint != NULL) // if WP exist |
||
509 | { // copy that name |
||
510 | u8 i; |
||
489 | killagreg | 511 | for(i=0;i<4;i++) |
386 | holgerb | 512 | { |
513 | name[i] = GPS_pWaypoint->Name[i]; |
||
514 | if(name[i] < ' ') name[i] = ' '; |
||
515 | } |
||
516 | } |
||
421 | holgerb | 517 | sprintf(string, "<WP>%s,%d,%d,%d</WP>\r\n",name,NaviData.WaypointIndex,NaviData.WaypointNumber,LogFC_WP_EventChannel); // x of y Waypoints and the actual value of the Event Channel |
518 | LogFC_WP_EventChannel = 0; // can be cleared now |
||
351 | holgerb | 519 | fputs_(string, doc->file); |
345 | holgerb | 520 | break; |
521 | case 7: |
||
92 | killagreg | 522 | // Target Bearing in deg |
86 | killagreg | 523 | sprintf(string, "<TargetBearing>%03d</TargetBearing>\r\n", NaviData.TargetPositionDeviation.Bearing); |
524 | fputs_(string, doc->file); |
||
92 | killagreg | 525 | // Target Distance in dm |
86 | killagreg | 526 | sprintf(string, "<TargetDistance>%d</TargetDistance>\r\n", NaviData.TargetPositionDeviation.Distance); |
527 | fputs_(string, doc->file); |
||
419 | holgerb | 528 | // Course in deg |
529 | i16_1 = GPSData.Heading/100000L; |
||
530 | sprintf(string, "<Course>%03d</Course>\r\n", i16_1); |
||
531 | fputs_(string, doc->file); |
||
532 | // Ground Speed in cm/s |
||
533 | sprintf(string, "<GroundSpeed>%d</GroundSpeed>\r\n", NaviData.GroundSpeed); |
||
534 | fputs_(string, doc->file); |
||
535 | // Vertical Speed in cm/s |
||
536 | sprintf(string, "<VerticalSpeed>%d</VerticalSpeed>\r\n", NaviData.TopSpeed); |
||
537 | fputs_(string, doc->file); |
||
345 | holgerb | 538 | break; |
539 | case 8: |
||
101 | holgerb | 540 | // RC Sticks as Nick/Roll/Yaw |
338 | holgerb | 541 | sprintf(string, "<RCSticks>%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d</RCSticks>\r\n", FC.StickNick,FC.StickRoll, FC.StickYaw, FC.StickGas,FC.Poti[0],FC.Poti[1],FC.Poti[2],FC.Poti[3],FC.Poti[4],FC.Poti[5],FC.Poti[6],FC.Poti[7]); |
101 | holgerb | 542 | fputs_(string, doc->file); |
94 | killagreg | 543 | // GPS Sticks as Nick/Roll/Yaw |
419 | holgerb | 544 | sprintf(string, "<GPSSticks>%d,%d,%d,'%c'</GPSSticks>\r\n", ToFlightCtrl.GPSStick.Nick, ToFlightCtrl.GPSStick.Roll, 0 ,NC_GPS_ModeCharacter); |
94 | killagreg | 545 | fputs_(string, doc->file); |
419 | holgerb | 546 | // RC Quality |
547 | sprintf(string, "<RCQuality>%d</RCQuality>\r\n", FC.RC_Quality); |
||
548 | fputs_(string, doc->file); |
||
453 | holgerb | 549 | // Navigation Update speed (in 0.1Hz) |
457 | holgerb | 550 | // sprintf(string, "<NaviUpdate>%d,%d</NaviUpdate>\r\n",FreqGpsProcessedIn5Sec,FreqNewGpsDataIn5Sec); |
551 | // fputs_(string, doc->file); |
||
86 | killagreg | 552 | // eof extensions |
553 | sprintf(string, "</extensions>\r\n"); |
||
554 | fputs_(string, doc->file); |
||
85 | killagreg | 555 | sprintf(string, "</trkpt>\r\n"); |
556 | fputs_(string, doc->file); |
||
345 | holgerb | 557 | break; |
558 | } |
||
559 | retvalue = 1; |
||
85 | killagreg | 560 | } |
561 | } |
||
562 | } |
||
563 | return(retvalue); |
||
564 | } |
||
565 | |||
566 | //________________________________________________________________________________________________________________________________________ |
||
567 | // Function: u8 KML_LoggGPSCoordinates(gps_data_t *, KML_Document_t *) |
||
568 | // |
||
569 | // Description: This function opens and adds gpscoordinates to an GPX-Document. The document will be opened, if not already done |
||
570 | // |
||
571 | // |
||
572 | // Returnvalue: '1' if an gps coordinate was logged |
||
573 | //________________________________________________________________________________________________________________________________________ |
||
574 | |||
345 | holgerb | 575 | u8 GPX_LoggGPSCoordinates(GPX_Document_t *doc,unsigned char part) |
85 | killagreg | 576 | { |
577 | u8 retval = 0; |
||
378 | holgerb | 578 | while(doc->state != GPX_DOC_TRACKSEGMENT_OPENED) // automatic create document with default filename on the card. |
85 | killagreg | 579 | { |
580 | switch(doc->state) |
||
581 | { |
||
582 | case GPX_DOC_CLOSED: // document hasn't been opened yet therefore it will be initialized automatically |
||
324 | killagreg | 583 | retval = GPX_DocumentOpen("default.gpx",doc); // open the gpx-document with a standardname. |
85 | killagreg | 584 | break; |
585 | |||
586 | case GPX_DOC_OPENED: // if a document has been opened before but no track exists: |
||
587 | retval = GPX_TrackBegin(doc); |
||
588 | break; |
||
589 | |||
590 | case GPX_DOC_TRACK_OPENED: // add tracksegement to the track |
||
591 | retval = GPX_TrackSegmentBegin(doc); |
||
592 | break; |
||
593 | |||
594 | default: |
||
595 | retval = 0; |
||
596 | break; |
||
597 | |||
598 | } |
||
599 | if(retval != 1) return(retval); // stop on error |
||
600 | } |
||
601 | |||
602 | if(doc->state == GPX_DOC_TRACKSEGMENT_OPENED) // if the document was opened add coordinates to the document. |
||
603 | { |
||
345 | holgerb | 604 | retval = GPX_TrackSegementAddPoint(doc,part); // add a track segment point |
85 | killagreg | 605 | } |
606 | return(retval); |
||
607 | } |
||
608 |