Rev 119 | Rev 134 | Go to most recent revision | Details | Compare with Previous | Last modification | View Log | RSS feed
Rev | Author | Line No. | Line |
---|---|---|---|
1 | ingob | 1 | /*#######################################################################################*/ |
2 | /* !!! THIS IS NOT FREE SOFTWARE !!! */ |
||
3 | /*#######################################################################################*/ |
||
4 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
5 | // + Copyright (c) 2008 Ingo Busker, Holger Buss |
||
6 | // + Nur für den privaten Gebrauch |
||
7 | // + FOR NON COMMERCIAL USE ONLY |
||
8 | // + www.MikroKopter.com |
||
9 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
41 | ingob | 10 | // + Es gilt für das gesamte Projekt (Hardware, Software, Binärfiles, Sourcecode und Dokumentation), |
11 | // + dass eine Nutzung (auch auszugsweise) nur für den privaten (nicht-kommerziellen) Gebrauch zulässig ist. |
||
12 | // + Sollten direkte oder indirekte kommerzielle Absichten verfolgt werden, ist mit uns (info@mikrokopter.de) Kontakt |
||
13 | // + bzgl. der Nutzungsbedingungen aufzunehmen. |
||
1 | ingob | 14 | // + Eine kommerzielle Nutzung ist z.B.Verkauf von MikroKoptern, Bestückung und Verkauf von Platinen oder Bausätzen, |
15 | // + Verkauf von Luftbildaufnahmen, usw. |
||
16 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
41 | ingob | 17 | // + Werden Teile des Quellcodes (mit oder ohne Modifikation) weiterverwendet oder veröffentlicht, |
1 | ingob | 18 | // + unterliegen sie auch diesen Nutzungsbedingungen und diese Nutzungsbedingungen incl. Copyright müssen dann beiliegen |
19 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
20 | // + Sollte die Software (auch auszugesweise) oder sonstige Informationen des MikroKopter-Projekts |
||
21 | // + auf anderen Webseiten oder sonstigen Medien veröffentlicht werden, muss unsere Webseite "http://www.mikrokopter.de" |
||
22 | // + eindeutig als Ursprung verlinkt werden |
||
23 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
24 | // + Keine Gewähr auf Fehlerfreiheit, Vollständigkeit oder Funktion |
||
25 | // + Benutzung auf eigene Gefahr |
||
26 | // + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden |
||
27 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
41 | ingob | 28 | // + Die PORTIERUNG der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur |
1 | ingob | 29 | // + mit unserer Zustimmung zulässig |
30 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
31 | // + Teile, die nicht eindeutig mit unserer Lizenzvereinbarung gekennzeichnet sind, unterliegen u.U. eigenen Vereinbarungen: |
||
41 | ingob | 32 | // + z.B. Die Funktion printf_P() unterliegt ihrer eigenen Lizenz |
1 | ingob | 33 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
41 | ingob | 34 | // + Redistributions of source code (with or without modifications) must retain the above copyright notice, |
1 | ingob | 35 | // + this list of conditions and the following disclaimer. |
36 | // + * Neither the name of the copyright holders nor the names of contributors may be used to endorse or promote products derived |
||
37 | // + from this software without specific prior written permission. |
||
41 | ingob | 38 | // + * The use of this project (hardware, software, binary files, sources and documentation) is only permitted |
1 | ingob | 39 | // + for non-commercial use (directly or indirectly) |
41 | ingob | 40 | // + Commercial use (for excample: selling of MikroKopters, selling of PCBs, assembly, ...) is only permitted |
1 | ingob | 41 | // + with our written permission |
41 | ingob | 42 | // + * If sources or documentations are redistributet on other webpages, out webpage (http://www.MikroKopter.de) must be |
43 | // + clearly linked as origin |
||
1 | ingob | 44 | // + * PORTING this software (or part of it) to systems (other than hardware from www.mikrokopter.de) is NOT allowed |
45 | // |
||
46 | // + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
||
47 | // + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
||
48 | // + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
||
49 | // + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
||
50 | // + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
||
51 | // + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
||
52 | // + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
||
53 | // + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
||
54 | // + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
||
55 | // + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
||
41 | ingob | 56 | // + POSSIBILITY OF SUCH DAMAGE. |
1 | ingob | 57 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
41 | ingob | 58 | //#define MCLK96MHZ |
1 | ingob | 59 | const unsigned long _Main_Crystal = 25000; |
41 | ingob | 60 | #include <stdio.h> |
61 | #include "91x_lib.h" |
||
62 | #include "led.h" |
||
63 | #include "uart0.h" |
||
64 | #include "uart1.h" |
||
65 | #include "uart2.h" |
||
66 | #include "GPS.h" |
||
67 | #include "i2c.h" |
||
119 | killagreg | 68 | #include "timer1.h" |
69 | #include "timer2.h" |
||
41 | ingob | 70 | #include "spi_slave.h" |
71 | #include "fat16.h" |
||
72 | #include "usb.h" |
||
73 | #include "sdc.h" |
||
82 | killagreg | 74 | #include "logging.h" |
88 | killagreg | 75 | #include "settings.h" |
1 | ingob | 76 | #include "main.h" |
77 | |||
78 | u32 TimerCompassUpdate; |
||
41 | ingob | 79 | u32 TimerCheckError; |
80 | u32 ErrorCode = 0; |
||
81 | u16 BeepTime; |
||
92 | killagreg | 82 | u8 NCFlags = 0; |
1 | ingob | 83 | |
41 | ingob | 84 | u8 ClearMKFlags = 0; |
85 | u8 StopNavigation = 0; |
||
86 | Param_t Parameter; |
||
78 | holgerb | 87 | volatile FC_t FC; |
1 | ingob | 88 | |
41 | ingob | 89 | s8 ErrorMSG[25]; |
90 | |||
1 | ingob | 91 | //---------------------------------------------------------------------------------------------------- |
41 | ingob | 92 | void SCU_Config(void) |
1 | ingob | 93 | { |
41 | ingob | 94 | /* configure PLL and set it as master clock source */ |
95 | SCU_MCLKSourceConfig(SCU_MCLK_OSC); // set master clock source to external oscillator clock (25MHz) before diabling the PLL |
||
96 | SCU_PLLCmd(DISABLE); // now disable the PLL |
||
97 | #ifdef MCLK96MHZ |
||
98 | SCU_BRCLKDivisorConfig(SCU_BRCLK_Div2); // set BRCLK to MCLK/2 = 48MHz |
||
99 | SCU_PCLKDivisorConfig(SCU_PCLK_Div4); // set PCLK (APB bus clock) divisor to 4 (half Reference Clock) |
||
100 | SCU_RCLKDivisorConfig(SCU_RCLK_Div2); // set RCLK (Reference Clock) divisor to 1 (full PPL clock) |
||
101 | SCU_HCLKDivisorConfig(SCU_HCLK_Div2); // set HCLK (AHB bus clock) divisor to 1 (full Reference Clock) |
||
102 | SCU_PLLFactorsConfig(192,25,2); // PLL = 96 MHz, Feedback Divider N=192, Pre-Divider M=25, Post-Divider P=2 |
||
103 | #else |
||
104 | SCU_BRCLKDivisorConfig(SCU_BRCLK_Div1); // set BRCLK to MCLK = 48MHz |
||
105 | SCU_PCLKDivisorConfig(SCU_PCLK_Div2); // set PCLK (APB bus clock) divisor to 2 (half Reference Clock) |
||
106 | SCU_RCLKDivisorConfig(SCU_RCLK_Div1); // set RCLK (Reference Clock) divisor to 1 (full PPL clock) |
||
107 | SCU_HCLKDivisorConfig(SCU_HCLK_Div1); // set HCLK (AHB bus clock) divisor to 1 (full Reference Clock) |
||
108 | SCU_PLLFactorsConfig(192,25,3); // PLL = 48 MHz, Feedback Divider N=192, Pre-Divider M=25, Post-Divider P=3 |
||
109 | #endif |
||
110 | SCU_PLLCmd(ENABLE); // Enable PLL (is disabled by SCU_PLLFactorsConfig) |
||
111 | SCU_MCLKSourceConfig(SCU_MCLK_PLL); // set master clock source to PLL |
||
112 | } |
||
1 | ingob | 113 | |
41 | ingob | 114 | //---------------------------------------------------------------------------------------------------- |
115 | void GetNaviCtrlVersion(void) |
||
1 | ingob | 116 | { |
41 | ingob | 117 | u8 msg[25]; |
1 | ingob | 118 | |
41 | ingob | 119 | sprintf(msg,"\n\r NaviCtrl V%d.%d%c", VERSION_MAJOR, VERSION_MINOR, 'a'+ VERSION_PATCH); |
110 | killagreg | 120 | UART1_PutString(msg); |
1 | ingob | 121 | } |
122 | |||
123 | //---------------------------------------------------------------------------------------------------- |
||
41 | ingob | 124 | void CheckErrors(void) |
125 | { |
||
126 | if(!CheckSPIOkay) |
||
127 | { |
||
128 | LED_RED_ON; |
||
129 | sprintf(ErrorMSG,"no FC communication "); |
||
130 | ErrorCode = 3; |
||
131 | StopNavigation = 1; |
||
132 | } |
||
133 | else if(!CheckI2COkay) |
||
134 | { |
||
135 | LED_RED_ON; |
||
136 | sprintf(ErrorMSG,"no MK3Mag communication "); |
||
137 | ErrorCode = 4; |
||
138 | StopNavigation = 1; |
||
139 | } |
||
140 | else if(FC_Version.Compatible != FC_SPI_COMPATIBLE) |
||
141 | { |
||
142 | LED_RED_ON; |
||
143 | sprintf(ErrorMSG,"FC not compatible "); |
||
144 | ErrorCode = 1; |
||
145 | StopNavigation = 1; |
||
146 | } |
||
147 | else if(MK3MAG_Version.Compatible != MK3MAG_I2C_COMPATIBLE) |
||
148 | { |
||
149 | sprintf(ErrorMSG,"MK3Mag not compatible "); |
||
150 | LED_RED_ON; |
||
151 | ErrorCode = 2; |
||
152 | StopNavigation = 1; |
||
153 | } |
||
154 | else if(!CheckGPSOkay) |
||
155 | { |
||
156 | LED_RED_ON; |
||
157 | sprintf(ErrorMSG,"no GPS communication "); |
||
158 | ErrorCode = 5; |
||
159 | StopNavigation = 1; |
||
160 | } |
||
161 | else if(I2C_Heading.Heading < 0) |
||
162 | { |
||
163 | LED_RED_ON; |
||
164 | sprintf(ErrorMSG,"bad compass value "); |
||
165 | ErrorCode = 6; |
||
166 | StopNavigation = 1; |
||
167 | } |
||
168 | else if(FC.RC_Quality < 100) |
||
169 | { |
||
170 | LED_RED_ON; |
||
171 | sprintf(ErrorMSG,"RC Signal lost "); |
||
172 | ErrorCode = 7; |
||
173 | } |
||
174 | else // no error occured |
||
175 | { |
||
176 | sprintf(ErrorMSG,"No Error "); |
||
177 | ErrorCode = 0; |
||
178 | StopNavigation = 0; |
||
179 | LED_RED_OFF; |
||
180 | } |
||
181 | CheckSPIOkay = 0; |
||
182 | CheckGPSOkay = 0; |
||
183 | CheckI2COkay = 0; |
||
184 | } |
||
24 | StephanB | 185 | |
186 | |||
1 | ingob | 187 | |
41 | ingob | 188 | //---------------------------------------------------------------------------------------------------- |
189 | int main(void) |
||
190 | { |
||
191 | /* Configure the system clocks */ |
||
192 | SCU_Config(); |
||
193 | /* init VIC (Vectored Interrupt Controller) */ |
||
194 | SCU_AHBPeriphClockConfig(__VIC,ENABLE); // enable AHB bus clock for VIC |
||
195 | SCU_AHBPeriphReset(__VIC, DISABLE); // disable reset state for VIC |
||
196 | VIC_DeInit(); // deinitializes the VIC module registers to their default reset values. |
||
197 | // initialize the interrupt handler |
||
198 | Interrupt_Init(); |
||
119 | killagreg | 199 | // initialize timer 1 for System Clock and delay rountines |
41 | ingob | 200 | TIMER1_Init(); |
201 | // initialize the LEDs (needs Timer 1) |
||
202 | Led_Init(); |
||
203 | // initialize the debug UART1 |
||
204 | UART1_Init(); |
||
110 | killagreg | 205 | UART1_PutString("\r\n---------------------------------------------"); |
120 | killagreg | 206 | // initialize timer 2 for servo outputs |
207 | TIMER2_Init(); |
||
41 | ingob | 208 | // initialize UART2 to FLIGHTCTRL |
209 | UART2_Init(); |
||
210 | // initialize UART0 (to MKGPS or MK3MAG) |
||
211 | UART0_Init(); |
||
212 | // initialize usb |
||
213 | USB_ConfigInit(); |
||
214 | // initialize SPI0 to FC |
||
215 | SPI0_Init(); |
||
216 | // initialize i2c bus to MK3MAG (needs Timer 1) |
||
217 | I2C1_Init(); |
||
218 | // initialize the gps position controller (needs Timer 1) |
||
219 | GPS_Init(); |
||
220 | // initialize fat16 partition on sd card (needs Timer 1) |
||
221 | Fat16_Init(); |
||
88 | killagreg | 222 | // initialize the settings |
223 | Settings_Init(); |
||
92 | killagreg | 224 | // initialize logging (needs settings) |
82 | killagreg | 225 | Logging_Init(); |
1 | ingob | 226 | |
41 | ingob | 227 | TimerCompassUpdate = SetDelay(5); |
228 | TimerCheckError = SetDelay(3000); |
||
110 | killagreg | 229 | UART1_PutString("\r\n---------------------------------------------"); |
230 | UART1_PutString("\n\r Version information:"); |
||
116 | killagreg | 231 | |
41 | ingob | 232 | GetNaviCtrlVersion(); |
116 | killagreg | 233 | |
41 | ingob | 234 | SPI0_GetFlightCtrlVersion(); |
235 | if(FC_Version.Compatible != FC_SPI_COMPATIBLE) |
||
236 | { |
||
237 | //sprintf(ErrorMSG,"\r\n %d <-> %d", FlightCtrlVersion.NaviCompatible, FC_SPI_COMPATIBLE); |
||
110 | killagreg | 238 | //UART1_PutString(ErrorMSG); |
239 | UART1_PutString("\n\r Flight-Ctrl not compatible"); |
||
41 | ingob | 240 | LED_RED_ON; |
241 | } |
||
78 | holgerb | 242 | |
41 | ingob | 243 | I2C1_GetMK3MagVersion(); |
244 | if(MK3MAG_Version.Compatible != MK3MAG_I2C_COMPATIBLE) |
||
245 | { |
||
110 | killagreg | 246 | UART1_PutString("\n\r MK3Mag not compatible"); |
41 | ingob | 247 | LED_RED_ON; |
248 | } |
||
1 | ingob | 249 | |
116 | killagreg | 250 | UART0_GetMKOSDVersion(); |
251 | |||
110 | killagreg | 252 | UART1_PutString("\r\n---------------------------------------------\r\n\r\n"); |
24 | StephanB | 253 | |
41 | ingob | 254 | for (;;) |
255 | { |
||
92 | killagreg | 256 | UART1_ProcessRxData(); // process request |
41 | ingob | 257 | UART1_TransmitTxData(); // send answer |
24 | StephanB | 258 | |
111 | killagreg | 259 | UART0_ProcessRxData(); // process request |
260 | UART0_TransmitTxData(); // send answer |
||
261 | |||
112 | killagreg | 262 | USB_ProcessRxData(); // process request |
263 | USB_TransmitTxData(); // send answer |
||
264 | |||
41 | ingob | 265 | SPI0_UpdateBuffer(); |
266 | // ------------------------- I2C Timing -------------------------------- |
||
267 | if(I2C_State != I2C_OFF) |
||
268 | { |
||
269 | if (CheckDelay(TimerCompassUpdate)) |
||
270 | { |
||
271 | // check for hanging I2C bus |
||
272 | if(CheckDelay(I2C1_Timeout)) |
||
273 | { // reset I2C |
||
110 | killagreg | 274 | UART1_PutString("\n\rCommunication-Error: MK3Mag\n\r"); |
41 | ingob | 275 | I2C1_Deinit(); |
276 | I2C1_Init(); |
||
277 | } |
||
278 | else |
||
279 | { // check for incomming compass calibration request |
||
280 | // update CalByte from spi input queue |
||
281 | fifo_get(&CompassCalcStateFiFo, (u8 *)&(I2C_WriteCal.CalByte)); |
||
282 | // send new calstate |
||
283 | if(I2C_ReadCal.CalByte != I2C_WriteCal.CalByte) |
||
284 | { |
||
285 | I2C1_SendCommand(I2C_CMD_WRITE_CAL); |
||
286 | } |
||
287 | else // request current heading |
||
288 | { |
||
289 | I2C1_SendCommand(I2C_CMD_READ_HEADING); |
||
290 | } |
||
291 | TimerCompassUpdate = SetDelay(25); // every 25 ms |
||
292 | } |
||
24 | StephanB | 293 | |
41 | ingob | 294 | } |
295 | } |
||
1 | ingob | 296 | |
41 | ingob | 297 | // ---------------- Error Check Timing ---------------------------- |
298 | if(CheckDelay(TimerCheckError)) |
||
1 | ingob | 299 | { |
114 | killagreg | 300 | TimerCheckError = SetDelay(1000); |
41 | ingob | 301 | if(!CheckSPIOkay) GPS_Navigation(); // process the GPS data even if the FC is not connected |
302 | CheckErrors(); |
||
77 | holgerb | 303 | if(FC.MKFlags & MKFLAG_FLY) NaviData.FlyingTime++; // we want to count the battery-time |
304 | // else NaviData.FlyingTime = 0; |
||
110 | killagreg | 305 | UART1_Request_SendFollowMe = TRUE; |
92 | killagreg | 306 | if(SerialLinkOkay) SerialLinkOkay--; |
307 | if(SerialLinkOkay < 250 - 5) NCFlags |= NC_FLAG_NOSERIALLINK; // 5 seconds timeout for serial communication |
||
308 | else NCFlags &= ~NC_FLAG_NOSERIALLINK; |
||
1 | ingob | 309 | } |
82 | killagreg | 310 | // ---------------- Logging --------------------------------------- |
311 | Logging_Update(); |
||
24 | StephanB | 312 | } |
1 | ingob | 313 | } |
314 | |||
24 | StephanB | 315 |