Rev 1525 | Go to most recent revision | Details | Compare with Previous | Last modification | View Log | RSS feed
Rev | Author | Line No. | Line |
---|---|---|---|
1 | ingob | 1 | #-------------------------------------------------------------------- |
2 | # MCU name |
||
1561 | killagreg | 3 | #MCU = atmega1284p |
1171 | hbuss | 4 | MCU = atmega644p |
1 | ingob | 5 | F_CPU = 20000000 |
6 | #------------------------------------------------------------------- |
||
1051 | killagreg | 7 | VERSION_MAJOR = 0 |
1525 | killagreg | 8 | VERSION_MINOR = 78 |
9 | VERSION_PATCH = 0 |
||
297 | holgerb | 10 | |
1399 | killagreg | 11 | VERSION_SERIAL_MAJOR = 11 # Serial Protocol |
12 | VERSION_SERIAL_MINOR = 0 # Serial Protocol |
||
1508 | killagreg | 13 | NC_SPI_COMPATIBLE = 12 # Navi-Kompatibilität |
1 | ingob | 14 | #------------------------------------------------------------------- |
15 | |||
1419 | ingob | 16 | # get SVN revision |
17 | REV := $(shell sh -c "cat .svn/entries | sed -n '4p'") |
||
18 | |||
1561 | killagreg | 19 | ifeq ($(MCU), atmega1284p) |
1 | ingob | 20 | FUSE_SETTINGS = -u -U lfuse:w:0xff:m -U hfuse:w:0xdf:m |
1561 | killagreg | 21 | HEX_NAME = MEGA1284P |
595 | hbuss | 22 | endif |
1 | ingob | 23 | |
595 | hbuss | 24 | ifeq ($(MCU), atmega644p) |
25 | FUSE_SETTINGS = -u -U lfuse:w:0xff:m -U hfuse:w:0xdf:m |
||
1 | ingob | 26 | HEX_NAME = MEGA644 |
27 | endif |
||
28 | |||
29 | ifeq ($(F_CPU), 16000000) |
||
30 | QUARZ = 16MHZ |
||
31 | endif |
||
32 | |||
33 | ifeq ($(F_CPU), 20000000) |
||
34 | QUARZ = 20MHZ |
||
35 | endif |
||
36 | |||
37 | |||
38 | # Output format. (can be srec, ihex, binary) |
||
39 | FORMAT = ihex |
||
40 | |||
41 | # Target file name (without extension). |
||
42 | |||
1051 | killagreg | 43 | ifeq ($(VERSION_PATCH), 0) |
1419 | ingob | 44 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)a_SVN$(REV) |
297 | holgerb | 45 | endif |
1051 | killagreg | 46 | ifeq ($(VERSION_PATCH), 1) |
1419 | ingob | 47 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)b_SVN$(REV) |
297 | holgerb | 48 | endif |
1051 | killagreg | 49 | ifeq ($(VERSION_PATCH), 2) |
1419 | ingob | 50 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)c_SVN$(REV) |
297 | holgerb | 51 | endif |
1051 | killagreg | 52 | ifeq ($(VERSION_PATCH), 3) |
1419 | ingob | 53 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)d_SVN$(REV) |
297 | holgerb | 54 | endif |
1051 | killagreg | 55 | ifeq ($(VERSION_PATCH), 4) |
1419 | ingob | 56 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)e_SVN$(REV) |
297 | holgerb | 57 | endif |
1051 | killagreg | 58 | ifeq ($(VERSION_PATCH), 5) |
1419 | ingob | 59 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)f_SVN$(REV) |
297 | holgerb | 60 | endif |
1051 | killagreg | 61 | ifeq ($(VERSION_PATCH), 6) |
1419 | ingob | 62 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)g_SVN$(REV) |
469 | hbuss | 63 | endif |
1051 | killagreg | 64 | ifeq ($(VERSION_PATCH), 7) |
1419 | ingob | 65 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)h_SVN$(REV) |
469 | hbuss | 66 | endif |
1051 | killagreg | 67 | ifeq ($(VERSION_PATCH), 8) |
1419 | ingob | 68 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)i_SVN$(REV) |
855 | hbuss | 69 | endif |
1051 | killagreg | 70 | ifeq ($(VERSION_PATCH), 9) |
1419 | ingob | 71 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)j_SVN$(REV) |
855 | hbuss | 72 | endif |
1051 | killagreg | 73 | ifeq ($(VERSION_PATCH), 10) |
1419 | ingob | 74 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)k_SVN$(REV) |
882 | hbuss | 75 | endif |
1166 | hbuss | 76 | ifeq ($(VERSION_PATCH), 11) |
1419 | ingob | 77 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)L_SVN$(REV) |
1166 | hbuss | 78 | endif |
79 | ifeq ($(VERSION_PATCH), 12) |
||
1419 | ingob | 80 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)m_SVN$(REV) |
1166 | hbuss | 81 | endif |
82 | ifeq ($(VERSION_PATCH), 13) |
||
1419 | ingob | 83 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)n_SVN$(REV) |
1166 | hbuss | 84 | endif |
1171 | hbuss | 85 | ifeq ($(VERSION_PATCH), 14) |
1419 | ingob | 86 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)o_SVN$(REV) |
1171 | hbuss | 87 | endif |
88 | ifeq ($(VERSION_PATCH), 15) |
||
1419 | ingob | 89 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)p_SVN$(REV) |
1171 | hbuss | 90 | endif |
91 | ifeq ($(VERSION_PATCH), 16) |
||
1419 | ingob | 92 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)q_SVN$(REV) |
1171 | hbuss | 93 | endif |
1 | ingob | 94 | |
1419 | ingob | 95 | |
1 | ingob | 96 | # Optimization level, can be [0, 1, 2, 3, s]. 0 turns off optimization. |
97 | # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) |
||
1490 | killagreg | 98 | OPT = s |
1491 | killagreg | 99 | #OPT = 2 |
1 | ingob | 100 | |
101 | ########################################################################################################## |
||
102 | # List C source files here. (C dependencies are automatically generated.) |
||
1444 | ingob | 103 | SRC = main.c uart.c timer0.c analog.c menu.c |
1426 | ingob | 104 | SRC += twimaster.c rc.c fc.c GPS.c spi.c led.c Spektrum.c |
1486 | killagreg | 105 | SRC += mymath.c jetimenu.c capacity.c |
1 | ingob | 106 | |
107 | ########################################################################################################## |
||
108 | |||
109 | |||
110 | # List Assembler source files here. |
||
111 | # Make them always end in a capital .S. Files ending in a lowercase .s |
||
112 | # will not be considered source files but generated files (assembler |
||
113 | # output from the compiler), and will be deleted upon "make clean"! |
||
114 | # Even though the DOS/Win* filesystem matches both .s and .S the same, |
||
115 | # it will preserve the spelling of the filenames, and gcc itself does |
||
116 | # care about how the name is spelled on its command-line. |
||
1330 | killagreg | 117 | ASRC = isqrt.S |
1 | ingob | 118 | |
119 | |||
120 | |||
121 | # List any extra directories to look for include files here. |
||
122 | # Each directory must be seperated by a space. |
||
123 | EXTRAINCDIRS = |
||
124 | |||
125 | |||
126 | # Optional compiler flags. |
||
127 | # -g: generate debugging information (for GDB, or for COFF conversion) |
||
128 | # -O*: optimization level |
||
129 | # -f...: tuning, see gcc manual and avr-libc documentation |
||
130 | # -Wall...: warning level |
||
131 | # -Wa,...: tell GCC to pass this to the assembler. |
||
132 | # -ahlms: create assembler listing |
||
1444 | ingob | 133 | CFLAGS = -O$(OPT) -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums -Wall -Wstrict-prototypes -Wa,-adhlns=$(<:%.c=%.lst) $(patsubst %,-I%,$(EXTRAINCDIRS)) |
1 | ingob | 134 | |
1491 | killagreg | 135 | |
1 | ingob | 136 | # Set a "language standard" compiler flag. |
137 | # Unremark just one line below to set the language standard to use. |
||
138 | # gnu99 = C99 + GNU extensions. See GCC manual for more information. |
||
139 | #CFLAGS += -std=c89 |
||
140 | #CFLAGS += -std=gnu89 |
||
141 | #CFLAGS += -std=c99 |
||
142 | CFLAGS += -std=gnu99 |
||
143 | |||
1491 | killagreg | 144 | # shrink code size |
145 | CFLAGS += -mtiny-stack |
||
146 | #CFLAGS += -fno-inline-functions |
||
147 | CFLAGS += -mcall-prologues |
||
148 | |||
1444 | ingob | 149 | CFLAGS += -DF_CPU=$(F_CPU) -DVERSION_MAJOR=$(VERSION_MAJOR) -DVERSION_MINOR=$(VERSION_MINOR) -DVERSION_PATCH=$(VERSION_PATCH) -DVERSION_SERIAL_MAJOR=$(VERSION_SERIAL_MAJOR) -DVERSION_SERIAL_MINOR=$(VERSION_SERIAL_MINOR) -DNC_SPI_COMPATIBLE=$(NC_SPI_COMPATIBLE) |
1 | ingob | 150 | |
151 | |||
152 | # Optional assembler flags. |
||
153 | # -Wa,...: tell GCC to pass this to the assembler. |
||
154 | # -ahlms: create listing |
||
155 | # -gstabs: have the assembler create line number information; note that |
||
156 | # for use in COFF files, additional information about filenames |
||
157 | # and function names needs to be present in the assembler source |
||
158 | # files -- see avr-libc docs [FIXME: not yet described there] |
||
159 | ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs |
||
160 | |||
161 | |||
162 | |||
163 | # Optional linker flags. |
||
164 | # -Wl,...: tell GCC to pass this to linker. |
||
165 | # -Map: create map file |
||
166 | # --cref: add cross reference to map file |
||
167 | LDFLAGS = -Wl,-Map=$(TARGET).map,--cref |
||
168 | |||
169 | # Additional libraries |
||
170 | |||
171 | # Minimalistic printf version |
||
172 | #LDFLAGS += -Wl,-u,vfprintf -lprintf_min |
||
173 | |||
174 | # Floating point printf version (requires -lm below) |
||
175 | #LDFLAGS += -Wl,-u,vfprintf -lprintf_flt |
||
176 | |||
177 | # -lm = math library |
||
178 | LDFLAGS += -lm |
||
179 | |||
1435 | killagreg | 180 | LDFLAGS += libfc.a |
1 | ingob | 181 | |
182 | ##LDFLAGS += -T./linkerfile/avr5.x |
||
183 | |||
184 | |||
185 | |||
186 | # Programming support using avrdude. Settings and variables. |
||
187 | |||
188 | # Programming hardware: alf avr910 avrisp bascom bsd |
||
189 | # dt006 pavr picoweb pony-stk200 sp12 stk200 stk500 |
||
190 | # |
||
191 | # Type: avrdude -c ? |
||
192 | # to get a full listing. |
||
193 | # |
||
595 | hbuss | 194 | #AVRDUDE_PROGRAMMER = dt006 |
1 | ingob | 195 | #AVRDUDE_PROGRAMMER = stk200 |
196 | #AVRDUDE_PROGRAMMER = ponyser |
||
595 | hbuss | 197 | AVRDUDE_PROGRAMMER = avrispv2 |
1 | ingob | 198 | #falls Ponyser ausgewählt wird, muss sich unsere avrdude-Configdatei im Bin-Verzeichnis des Compilers befinden |
199 | |||
595 | hbuss | 200 | #AVRDUDE_PORT = com1 # programmer connected to serial device |
201 | #AVRDUDE_PORT = lpt1 # programmer connected to parallel port |
||
202 | AVRDUDE_PORT = usb # programmer connected to USB |
||
1 | ingob | 203 | |
204 | #AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex |
||
205 | AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex $(FUSE_SETTINGS) |
||
206 | #AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep |
||
207 | |||
595 | hbuss | 208 | #avrdude -c avrispv2 -P usb -p m32 -U flash:w:blink.hex |
1 | ingob | 209 | AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) |
210 | |||
211 | # Uncomment the following if you want avrdude's erase cycle counter. |
||
212 | # Note that this counter needs to be initialized first using -Yn, |
||
213 | # see avrdude manual. |
||
214 | #AVRDUDE_ERASE += -y |
||
215 | |||
216 | # Uncomment the following if you do /not/ wish a verification to be |
||
217 | # performed after programming the device. |
||
218 | AVRDUDE_FLAGS += -V |
||
219 | |||
220 | # Increase verbosity level. Please use this when submitting bug |
||
221 | # reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> |
||
222 | # to submit bug reports. |
||
223 | #AVRDUDE_FLAGS += -v -v |
||
224 | |||
225 | # --------------------------------------------------------------------------- |
||
226 | # Define directories, if needed. |
||
227 | DIRAVR = c:/winavr |
||
228 | DIRAVRBIN = $(DIRAVR)/bin |
||
229 | DIRAVRUTILS = $(DIRAVR)/utils/bin |
||
230 | DIRINC = . |
||
231 | DIRLIB = $(DIRAVR)/avr/lib |
||
232 | |||
233 | |||
234 | # Define programs and commands. |
||
235 | SHELL = sh |
||
236 | |||
237 | CC = avr-gcc |
||
238 | |||
239 | OBJCOPY = avr-objcopy |
||
240 | OBJDUMP = avr-objdump |
||
241 | SIZE = avr-size |
||
242 | |||
243 | # Programming support using avrdude. |
||
244 | AVRDUDE = avrdude |
||
245 | |||
246 | REMOVE = rm -f |
||
247 | COPY = cp |
||
248 | |||
249 | HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex |
||
250 | ELFSIZE = $(SIZE) -A $(TARGET).elf |
||
1561 | killagreg | 251 | LIMITS = $(SIZE) --mcu=$(MCU) -C $(TARGET).elf |
1 | ingob | 252 | |
1490 | killagreg | 253 | |
1 | ingob | 254 | # Define Messages |
255 | # English |
||
256 | MSG_ERRORS_NONE = Errors: none |
||
257 | MSG_BEGIN = -------- begin -------- |
||
258 | MSG_END = -------- end -------- |
||
259 | MSG_SIZE_BEFORE = Size before: |
||
260 | MSG_SIZE_AFTER = Size after: |
||
261 | MSG_COFF = Converting to AVR COFF: |
||
262 | MSG_EXTENDED_COFF = Converting to AVR Extended COFF: |
||
263 | MSG_FLASH = Creating load file for Flash: |
||
264 | MSG_EEPROM = Creating load file for EEPROM: |
||
265 | MSG_EXTENDED_LISTING = Creating Extended Listing: |
||
266 | MSG_SYMBOL_TABLE = Creating Symbol Table: |
||
267 | MSG_LINKING = Linking: |
||
268 | MSG_COMPILING = Compiling: |
||
269 | MSG_ASSEMBLING = Assembling: |
||
270 | MSG_CLEANING = Cleaning project: |
||
271 | |||
272 | |||
273 | # Define all object files. |
||
1424 | ingob | 274 | OBJ = $(SRC:.c=.o) $(ASRC:.S=.o) |
1 | ingob | 275 | |
276 | # Define all listing files. |
||
277 | LST = $(ASRC:.S=.lst) $(SRC:.c=.lst) |
||
278 | |||
279 | # Combine all necessary flags and optional flags. |
||
280 | # Add target processor to flags. |
||
281 | #ALL_CFLAGS = -mmcu=$(MCU) -DF_CPU=$(F_CPU) -I. $(CFLAGS) |
||
282 | ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) |
||
283 | ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) |
||
284 | |||
285 | |||
286 | # Default target. |
||
1444 | ingob | 287 | all: begin gccversion sizebefore $(TARGET).elf $(TARGET).hex sizeafter finished end |
1 | ingob | 288 | |
289 | |||
290 | # Eye candy. |
||
291 | # AVR Studio 3.x does not check make's exit code but relies on |
||
292 | # the following magic strings to be generated by the compile job. |
||
293 | begin: |
||
294 | @echo |
||
295 | @echo $(MSG_BEGIN) |
||
296 | |||
297 | finished: |
||
298 | @echo $(MSG_ERRORS_NONE) |
||
299 | |||
300 | end: |
||
301 | @echo $(MSG_END) |
||
302 | @echo |
||
303 | |||
304 | |||
305 | # Display size of file. |
||
306 | sizebefore: |
||
1490 | killagreg | 307 | @if [ -f $(TARGET).elf ]; then echo Size before:; $(ELFSIZE); $(HEXSIZE); $(LIMITS); echo; fi |
1 | ingob | 308 | sizeafter: |
1490 | killagreg | 309 | @if [ -f $(TARGET).elf ]; then echo Size after:; $(ELFSIZE); $(HEXSIZE); $(LIMITS); echo; fi |
1 | ingob | 310 | |
311 | |||
312 | # Display compiler version information. |
||
313 | gccversion : |
||
314 | @$(CC) --version |
||
315 | |||
316 | |||
317 | # Convert ELF to COFF for use in debugging / simulating in |
||
318 | # AVR Studio or VMLAB. |
||
319 | COFFCONVERT=$(OBJCOPY) --debugging \ |
||
320 | --change-section-address .data-0x800000 \ |
||
321 | --change-section-address .bss-0x800000 \ |
||
322 | --change-section-address .noinit-0x800000 \ |
||
323 | --change-section-address .eeprom-0x810000 |
||
324 | |||
325 | |||
326 | coff: $(TARGET).elf |
||
327 | @echo |
||
328 | @echo $(MSG_COFF) $(TARGET).cof |
||
329 | $(COFFCONVERT) -O coff-avr $< $(TARGET).cof |
||
330 | |||
331 | |||
332 | extcoff: $(TARGET).elf |
||
333 | @echo |
||
334 | @echo $(MSG_EXTENDED_COFF) $(TARGET).cof |
||
335 | $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof |
||
336 | |||
337 | |||
338 | |||
339 | |||
340 | # Program the device. |
||
341 | program: $(TARGET).hex $(TARGET).eep |
||
342 | $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) |
||
343 | |||
344 | |||
345 | |||
346 | |||
347 | # Create final output files (.hex, .eep) from ELF output file. |
||
348 | %.hex: %.elf |
||
349 | @echo |
||
350 | @echo $(MSG_FLASH) $@ |
||
351 | $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@ |
||
352 | |||
353 | %.eep: %.elf |
||
354 | @echo |
||
355 | @echo $(MSG_EEPROM) $@ |
||
356 | -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ |
||
357 | --change-section-lma .eeprom=0 -O $(FORMAT) $< $@ |
||
358 | |||
359 | # Create extended listing file from ELF output file. |
||
360 | %.lss: %.elf |
||
361 | @echo |
||
362 | @echo $(MSG_EXTENDED_LISTING) $@ |
||
363 | $(OBJDUMP) -h -S $< > $@ |
||
364 | |||
365 | # Create a symbol table from ELF output file. |
||
366 | %.sym: %.elf |
||
367 | @echo |
||
368 | @echo $(MSG_SYMBOL_TABLE) $@ |
||
369 | avr-nm -n $< > $@ |
||
370 | |||
371 | |||
372 | |||
373 | # Link: create ELF output file from object files. |
||
374 | .SECONDARY : $(TARGET).elf |
||
375 | .PRECIOUS : $(OBJ) |
||
376 | %.elf: $(OBJ) |
||
377 | @echo |
||
378 | @echo $(MSG_LINKING) $@ |
||
379 | $(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS) |
||
380 | |||
381 | |||
382 | # Compile: create object files from C source files. |
||
383 | %.o : %.c |
||
384 | @echo |
||
385 | @echo $(MSG_COMPILING) $< |
||
386 | $(CC) -c $(ALL_CFLAGS) $< -o $@ |
||
387 | |||
388 | |||
389 | # Compile: create assembler files from C source files. |
||
390 | %.s : %.c |
||
391 | $(CC) -S $(ALL_CFLAGS) $< -o $@ |
||
392 | |||
393 | |||
394 | # Assemble: create object files from assembler source files. |
||
395 | %.o : %.S |
||
396 | @echo |
||
397 | @echo $(MSG_ASSEMBLING) $< |
||
398 | $(CC) -c $(ALL_ASFLAGS) $< -o $@ |
||
399 | |||
400 | |||
401 | |||
402 | |||
403 | |||
404 | |||
405 | # Target: clean project. |
||
406 | clean: begin clean_list finished end |
||
407 | |||
408 | clean_list : |
||
409 | @echo |
||
410 | @echo $(MSG_CLEANING) |
||
1431 | ingob | 411 | $(REMOVE) Flight-Ctrl_*.hex |
1444 | ingob | 412 | $(REMOVE) Flight-Ctrl_*.eep |
1 | ingob | 413 | $(REMOVE) $(TARGET).obj |
414 | $(REMOVE) $(TARGET).cof |
||
1444 | ingob | 415 | $(REMOVE) Flight-Ctrl_*.elf |
416 | $(REMOVE) Flight-Ctrl_*.map |
||
1 | ingob | 417 | $(REMOVE) $(TARGET).obj |
418 | $(REMOVE) $(TARGET).a90 |
||
1444 | ingob | 419 | $(REMOVE) Flight-Ctrl_*.sym |
1 | ingob | 420 | $(REMOVE) $(TARGET).lnk |
421 | $(REMOVE) $(TARGET).lss |
||
1431 | ingob | 422 | $(REMOVE) $(OBJ) |
1 | ingob | 423 | $(REMOVE) $(LST) |
424 | $(REMOVE) $(SRC:.c=.s) |
||
425 | $(REMOVE) $(SRC:.c=.d) |
||
1419 | ingob | 426 | $(REMOVE) $(SRC:.c=.o) |
1 | ingob | 427 | |
428 | |||
429 | # Automatically generate C source code dependencies. |
||
430 | # (Code originally taken from the GNU make user manual and modified |
||
431 | # (See README.txt Credits).) |
||
432 | # |
||
433 | # Note that this will work with sh (bash) and sed that is shipped with WinAVR |
||
434 | # (see the SHELL variable defined above). |
||
435 | # This may not work with other shells or other seds. |
||
436 | # |
||
437 | %.d: %.c |
||
438 | set -e; $(CC) -MM $(ALL_CFLAGS) $< \ |
||
439 | | sed 's,\(.*\)\.o[ :]*,\1.o \1.d : ,g' > $@; \ |
||
440 | [ -s $@ ] || rm -f $@ |
||
441 | |||
442 | |||
443 | # Remove the '-' if you want to see the dependency files generated. |
||
1444 | ingob | 444 | -include $(SRC:%.c=%.d) |
1 | ingob | 445 | |
446 | |||
447 | |||
448 | # Listing of phony targets. |
||
449 | .PHONY : all begin finish end sizebefore sizeafter gccversion coff extcoff \ |
||
450 | clean clean_list program |
||
451 |