Rev 1167 | Go to most recent revision | Details | Compare with Previous | Last modification | View Log | RSS feed
Rev | Author | Line No. | Line |
---|---|---|---|
1 | ingob | 1 | #-------------------------------------------------------------------- |
2 | # MCU name |
||
1171 | hbuss | 3 | MCU = atmega644p |
1 | ingob | 4 | F_CPU = 20000000 |
5 | #------------------------------------------------------------------- |
||
1051 | killagreg | 6 | VERSION_MAJOR = 0 |
1111 | hbuss | 7 | VERSION_MINOR = 72 |
1171 | hbuss | 8 | VERSION_PATCH = 14 |
297 | holgerb | 9 | |
1058 | killagreg | 10 | VERSION_SERIAL_MAJOR = 10 # Serial Protocol |
11 | VERSION_SERIAL_MINOR = 0 # Serial Protocol |
||
1171 | hbuss | 12 | NC_SPI_COMPATIBLE = 5 # Navi-Kompatibilität |
1 | ingob | 13 | #------------------------------------------------------------------- |
14 | |||
15 | ifeq ($(MCU), atmega32) |
||
16 | # FUSE_SETTINGS= -u -U lfuse:w:0xff:m -U hfuse:w:0xcf:m |
||
17 | |||
18 | HEX_NAME = MEGA32 |
||
19 | endif |
||
20 | |||
21 | ifeq ($(MCU), atmega644) |
||
22 | FUSE_SETTINGS = -u -U lfuse:w:0xff:m -U hfuse:w:0xdf:m |
||
23 | #FUSE_SETTINGS = -U lfuse:w:0xff:m -U hfuse:w:0xdf:m |
||
24 | # -u bei neuen Controllern wieder einspielen |
||
595 | hbuss | 25 | HEX_NAME = MEGA644 |
26 | endif |
||
1 | ingob | 27 | |
595 | hbuss | 28 | ifeq ($(MCU), atmega644p) |
29 | FUSE_SETTINGS = -u -U lfuse:w:0xff:m -U hfuse:w:0xdf:m |
||
1 | ingob | 30 | HEX_NAME = MEGA644 |
31 | endif |
||
32 | |||
33 | ifeq ($(F_CPU), 16000000) |
||
34 | QUARZ = 16MHZ |
||
35 | endif |
||
36 | |||
37 | ifeq ($(F_CPU), 20000000) |
||
38 | QUARZ = 20MHZ |
||
39 | endif |
||
40 | |||
41 | |||
42 | # Output format. (can be srec, ihex, binary) |
||
43 | FORMAT = ihex |
||
44 | |||
45 | # Target file name (without extension). |
||
46 | |||
1051 | killagreg | 47 | ifeq ($(VERSION_PATCH), 0) |
48 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)a |
||
297 | holgerb | 49 | endif |
1051 | killagreg | 50 | ifeq ($(VERSION_PATCH), 1) |
51 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)b |
||
297 | holgerb | 52 | endif |
1051 | killagreg | 53 | ifeq ($(VERSION_PATCH), 2) |
54 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)c |
||
297 | holgerb | 55 | endif |
1051 | killagreg | 56 | ifeq ($(VERSION_PATCH), 3) |
57 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)d |
||
297 | holgerb | 58 | endif |
1051 | killagreg | 59 | ifeq ($(VERSION_PATCH), 4) |
60 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)e |
||
297 | holgerb | 61 | endif |
1051 | killagreg | 62 | ifeq ($(VERSION_PATCH), 5) |
63 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)f |
||
297 | holgerb | 64 | endif |
1051 | killagreg | 65 | ifeq ($(VERSION_PATCH), 6) |
66 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)g |
||
469 | hbuss | 67 | endif |
1051 | killagreg | 68 | ifeq ($(VERSION_PATCH), 7) |
69 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)h |
||
469 | hbuss | 70 | endif |
1051 | killagreg | 71 | ifeq ($(VERSION_PATCH), 8) |
72 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)i |
||
855 | hbuss | 73 | endif |
1051 | killagreg | 74 | ifeq ($(VERSION_PATCH), 9) |
75 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)j |
||
855 | hbuss | 76 | endif |
1051 | killagreg | 77 | ifeq ($(VERSION_PATCH), 10) |
78 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)k |
||
882 | hbuss | 79 | endif |
1166 | hbuss | 80 | ifeq ($(VERSION_PATCH), 11) |
81 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)L |
||
82 | endif |
||
83 | ifeq ($(VERSION_PATCH), 12) |
||
84 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)m |
||
85 | endif |
||
86 | ifeq ($(VERSION_PATCH), 13) |
||
87 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)n |
||
88 | endif |
||
1171 | hbuss | 89 | ifeq ($(VERSION_PATCH), 14) |
90 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)o |
||
91 | endif |
||
92 | ifeq ($(VERSION_PATCH), 15) |
||
93 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)p |
||
94 | endif |
||
95 | ifeq ($(VERSION_PATCH), 16) |
||
96 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)q |
||
97 | endif |
||
1 | ingob | 98 | |
99 | # Optimization level, can be [0, 1, 2, 3, s]. 0 turns off optimization. |
||
100 | # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) |
||
1171 | hbuss | 101 | OPT = 2 |
1 | ingob | 102 | |
103 | ########################################################################################################## |
||
104 | # List C source files here. (C dependencies are automatically generated.) |
||
105 | SRC = main.c uart.c printf_P.c timer0.c analog.c menu.c |
||
1171 | hbuss | 106 | SRC += twimaster.c rc.c fc.c GPS.c spi.c led.c Spectrum.c |
1 | ingob | 107 | |
108 | ########################################################################################################## |
||
109 | |||
110 | |||
111 | # List Assembler source files here. |
||
112 | # Make them always end in a capital .S. Files ending in a lowercase .s |
||
113 | # will not be considered source files but generated files (assembler |
||
114 | # output from the compiler), and will be deleted upon "make clean"! |
||
115 | # Even though the DOS/Win* filesystem matches both .s and .S the same, |
||
116 | # it will preserve the spelling of the filenames, and gcc itself does |
||
117 | # care about how the name is spelled on its command-line. |
||
118 | ASRC = |
||
119 | |||
120 | |||
121 | |||
122 | # List any extra directories to look for include files here. |
||
123 | # Each directory must be seperated by a space. |
||
124 | EXTRAINCDIRS = |
||
125 | |||
126 | |||
127 | # Optional compiler flags. |
||
128 | # -g: generate debugging information (for GDB, or for COFF conversion) |
||
129 | # -O*: optimization level |
||
130 | # -f...: tuning, see gcc manual and avr-libc documentation |
||
131 | # -Wall...: warning level |
||
132 | # -Wa,...: tell GCC to pass this to the assembler. |
||
133 | # -ahlms: create assembler listing |
||
134 | CFLAGS = -O$(OPT) \ |
||
135 | -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums \ |
||
136 | -Wall -Wstrict-prototypes \ |
||
137 | -Wa,-adhlns=$(<:.c=.lst) \ |
||
138 | $(patsubst %,-I%,$(EXTRAINCDIRS)) |
||
139 | |||
140 | |||
141 | # Set a "language standard" compiler flag. |
||
142 | # Unremark just one line below to set the language standard to use. |
||
143 | # gnu99 = C99 + GNU extensions. See GCC manual for more information. |
||
144 | #CFLAGS += -std=c89 |
||
145 | #CFLAGS += -std=gnu89 |
||
146 | #CFLAGS += -std=c99 |
||
147 | CFLAGS += -std=gnu99 |
||
148 | |||
1058 | killagreg | 149 | CFLAGS += -DVERSION_MAJOR=$(VERSION_MAJOR) -DVERSION_MINOR=$(VERSION_MINOR) -DVERSION_PATCH=$(VERSION_PATCH) -DVERSION_SERIAL_MAJOR=$(VERSION_SERIAL_MAJOR) -DVERSION_SERIAL_MINOR=$(VERSION_SERIAL_MINOR) -DNC_SPI_COMPATIBLE=$(NC_SPI_COMPATIBLE) |
1 | ingob | 150 | |
151 | |||
152 | # Optional assembler flags. |
||
153 | # -Wa,...: tell GCC to pass this to the assembler. |
||
154 | # -ahlms: create listing |
||
155 | # -gstabs: have the assembler create line number information; note that |
||
156 | # for use in COFF files, additional information about filenames |
||
157 | # and function names needs to be present in the assembler source |
||
158 | # files -- see avr-libc docs [FIXME: not yet described there] |
||
159 | ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs |
||
160 | |||
161 | |||
162 | |||
163 | # Optional linker flags. |
||
164 | # -Wl,...: tell GCC to pass this to linker. |
||
165 | # -Map: create map file |
||
166 | # --cref: add cross reference to map file |
||
167 | LDFLAGS = -Wl,-Map=$(TARGET).map,--cref |
||
168 | |||
169 | # Additional libraries |
||
170 | |||
171 | # Minimalistic printf version |
||
172 | #LDFLAGS += -Wl,-u,vfprintf -lprintf_min |
||
173 | |||
174 | # Floating point printf version (requires -lm below) |
||
175 | #LDFLAGS += -Wl,-u,vfprintf -lprintf_flt |
||
176 | |||
177 | # -lm = math library |
||
178 | LDFLAGS += -lm |
||
179 | |||
180 | |||
181 | ##LDFLAGS += -T./linkerfile/avr5.x |
||
182 | |||
183 | |||
184 | |||
185 | # Programming support using avrdude. Settings and variables. |
||
186 | |||
187 | # Programming hardware: alf avr910 avrisp bascom bsd |
||
188 | # dt006 pavr picoweb pony-stk200 sp12 stk200 stk500 |
||
189 | # |
||
190 | # Type: avrdude -c ? |
||
191 | # to get a full listing. |
||
192 | # |
||
595 | hbuss | 193 | #AVRDUDE_PROGRAMMER = dt006 |
1 | ingob | 194 | #AVRDUDE_PROGRAMMER = stk200 |
195 | #AVRDUDE_PROGRAMMER = ponyser |
||
595 | hbuss | 196 | AVRDUDE_PROGRAMMER = avrispv2 |
1 | ingob | 197 | #falls Ponyser ausgewählt wird, muss sich unsere avrdude-Configdatei im Bin-Verzeichnis des Compilers befinden |
198 | |||
595 | hbuss | 199 | #AVRDUDE_PORT = com1 # programmer connected to serial device |
200 | #AVRDUDE_PORT = lpt1 # programmer connected to parallel port |
||
201 | AVRDUDE_PORT = usb # programmer connected to USB |
||
1 | ingob | 202 | |
203 | #AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex |
||
204 | AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex $(FUSE_SETTINGS) |
||
205 | #AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep |
||
206 | |||
595 | hbuss | 207 | #avrdude -c avrispv2 -P usb -p m32 -U flash:w:blink.hex |
1 | ingob | 208 | AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) |
209 | |||
210 | # Uncomment the following if you want avrdude's erase cycle counter. |
||
211 | # Note that this counter needs to be initialized first using -Yn, |
||
212 | # see avrdude manual. |
||
213 | #AVRDUDE_ERASE += -y |
||
214 | |||
215 | # Uncomment the following if you do /not/ wish a verification to be |
||
216 | # performed after programming the device. |
||
217 | AVRDUDE_FLAGS += -V |
||
218 | |||
219 | # Increase verbosity level. Please use this when submitting bug |
||
220 | # reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> |
||
221 | # to submit bug reports. |
||
222 | #AVRDUDE_FLAGS += -v -v |
||
223 | |||
224 | # --------------------------------------------------------------------------- |
||
225 | # Define directories, if needed. |
||
226 | DIRAVR = c:/winavr |
||
227 | DIRAVRBIN = $(DIRAVR)/bin |
||
228 | DIRAVRUTILS = $(DIRAVR)/utils/bin |
||
229 | DIRINC = . |
||
230 | DIRLIB = $(DIRAVR)/avr/lib |
||
231 | |||
232 | |||
233 | # Define programs and commands. |
||
234 | SHELL = sh |
||
235 | |||
236 | CC = avr-gcc |
||
237 | |||
238 | OBJCOPY = avr-objcopy |
||
239 | OBJDUMP = avr-objdump |
||
240 | SIZE = avr-size |
||
241 | |||
242 | # Programming support using avrdude. |
||
243 | AVRDUDE = avrdude |
||
244 | |||
245 | REMOVE = rm -f |
||
246 | COPY = cp |
||
247 | |||
248 | HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex |
||
249 | ELFSIZE = $(SIZE) -A $(TARGET).elf |
||
250 | |||
251 | # Define Messages |
||
252 | # English |
||
253 | MSG_ERRORS_NONE = Errors: none |
||
254 | MSG_BEGIN = -------- begin -------- |
||
255 | MSG_END = -------- end -------- |
||
256 | MSG_SIZE_BEFORE = Size before: |
||
257 | MSG_SIZE_AFTER = Size after: |
||
258 | MSG_COFF = Converting to AVR COFF: |
||
259 | MSG_EXTENDED_COFF = Converting to AVR Extended COFF: |
||
260 | MSG_FLASH = Creating load file for Flash: |
||
261 | MSG_EEPROM = Creating load file for EEPROM: |
||
262 | MSG_EXTENDED_LISTING = Creating Extended Listing: |
||
263 | MSG_SYMBOL_TABLE = Creating Symbol Table: |
||
264 | MSG_LINKING = Linking: |
||
265 | MSG_COMPILING = Compiling: |
||
266 | MSG_ASSEMBLING = Assembling: |
||
267 | MSG_CLEANING = Cleaning project: |
||
268 | |||
269 | |||
270 | # Define all object files. |
||
271 | OBJ = $(SRC:.c=.o) $(ASRC:.S=.o) |
||
272 | |||
273 | # Define all listing files. |
||
274 | LST = $(ASRC:.S=.lst) $(SRC:.c=.lst) |
||
275 | |||
276 | # Combine all necessary flags and optional flags. |
||
277 | # Add target processor to flags. |
||
278 | #ALL_CFLAGS = -mmcu=$(MCU) -DF_CPU=$(F_CPU) -I. $(CFLAGS) |
||
279 | ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) |
||
280 | ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) |
||
281 | |||
282 | |||
283 | # Default target. |
||
284 | all: begin gccversion sizebefore $(TARGET).elf $(TARGET).hex $(TARGET).eep \ |
||
285 | $(TARGET).lss $(TARGET).sym sizeafter finished end |
||
286 | |||
287 | |||
288 | # Eye candy. |
||
289 | # AVR Studio 3.x does not check make's exit code but relies on |
||
290 | # the following magic strings to be generated by the compile job. |
||
291 | begin: |
||
292 | @echo |
||
293 | @echo $(MSG_BEGIN) |
||
294 | |||
295 | finished: |
||
296 | @echo $(MSG_ERRORS_NONE) |
||
297 | |||
298 | end: |
||
299 | @echo $(MSG_END) |
||
300 | @echo |
||
301 | |||
302 | |||
303 | # Display size of file. |
||
1171 | hbuss | 304 | # Display size of file. |
1 | ingob | 305 | sizebefore: |
1171 | hbuss | 306 | @if [ -f $(TARGET).elf ]; then echo Size before:; $(ELFSIZE); $(HEXSIZE); echo; fi |
1 | ingob | 307 | sizeafter: |
1171 | hbuss | 308 | @if [ -f $(TARGET).elf ]; then echo Size after:; $(ELFSIZE); $(HEXSIZE); echo; fi |
1 | ingob | 309 | |
310 | |||
311 | # Display compiler version information. |
||
312 | gccversion : |
||
313 | @$(CC) --version |
||
314 | |||
315 | |||
316 | # Convert ELF to COFF for use in debugging / simulating in |
||
317 | # AVR Studio or VMLAB. |
||
318 | COFFCONVERT=$(OBJCOPY) --debugging \ |
||
319 | --change-section-address .data-0x800000 \ |
||
320 | --change-section-address .bss-0x800000 \ |
||
321 | --change-section-address .noinit-0x800000 \ |
||
322 | --change-section-address .eeprom-0x810000 |
||
323 | |||
324 | |||
325 | coff: $(TARGET).elf |
||
326 | @echo |
||
327 | @echo $(MSG_COFF) $(TARGET).cof |
||
328 | $(COFFCONVERT) -O coff-avr $< $(TARGET).cof |
||
329 | |||
330 | |||
331 | extcoff: $(TARGET).elf |
||
332 | @echo |
||
333 | @echo $(MSG_EXTENDED_COFF) $(TARGET).cof |
||
334 | $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof |
||
335 | |||
336 | |||
337 | |||
338 | |||
339 | # Program the device. |
||
340 | program: $(TARGET).hex $(TARGET).eep |
||
341 | $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) |
||
342 | |||
343 | |||
344 | |||
345 | |||
346 | # Create final output files (.hex, .eep) from ELF output file. |
||
347 | %.hex: %.elf |
||
348 | @echo |
||
349 | @echo $(MSG_FLASH) $@ |
||
350 | $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@ |
||
351 | |||
352 | %.eep: %.elf |
||
353 | @echo |
||
354 | @echo $(MSG_EEPROM) $@ |
||
355 | -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ |
||
356 | --change-section-lma .eeprom=0 -O $(FORMAT) $< $@ |
||
357 | |||
358 | # Create extended listing file from ELF output file. |
||
359 | %.lss: %.elf |
||
360 | @echo |
||
361 | @echo $(MSG_EXTENDED_LISTING) $@ |
||
362 | $(OBJDUMP) -h -S $< > $@ |
||
363 | |||
364 | # Create a symbol table from ELF output file. |
||
365 | %.sym: %.elf |
||
366 | @echo |
||
367 | @echo $(MSG_SYMBOL_TABLE) $@ |
||
368 | avr-nm -n $< > $@ |
||
369 | |||
370 | |||
371 | |||
372 | # Link: create ELF output file from object files. |
||
373 | .SECONDARY : $(TARGET).elf |
||
374 | .PRECIOUS : $(OBJ) |
||
375 | %.elf: $(OBJ) |
||
376 | @echo |
||
377 | @echo $(MSG_LINKING) $@ |
||
378 | $(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS) |
||
379 | |||
380 | |||
381 | # Compile: create object files from C source files. |
||
382 | %.o : %.c |
||
383 | @echo |
||
384 | @echo $(MSG_COMPILING) $< |
||
385 | $(CC) -c $(ALL_CFLAGS) $< -o $@ |
||
386 | |||
387 | |||
388 | # Compile: create assembler files from C source files. |
||
389 | %.s : %.c |
||
390 | $(CC) -S $(ALL_CFLAGS) $< -o $@ |
||
391 | |||
392 | |||
393 | # Assemble: create object files from assembler source files. |
||
394 | %.o : %.S |
||
395 | @echo |
||
396 | @echo $(MSG_ASSEMBLING) $< |
||
397 | $(CC) -c $(ALL_ASFLAGS) $< -o $@ |
||
398 | |||
399 | |||
400 | |||
401 | |||
402 | |||
403 | |||
404 | # Target: clean project. |
||
405 | clean: begin clean_list finished end |
||
406 | |||
407 | clean_list : |
||
408 | @echo |
||
409 | @echo $(MSG_CLEANING) |
||
410 | # $(REMOVE) $(TARGET).hex |
||
411 | $(REMOVE) $(TARGET).eep |
||
412 | $(REMOVE) $(TARGET).obj |
||
413 | $(REMOVE) $(TARGET).cof |
||
414 | $(REMOVE) $(TARGET).elf |
||
415 | $(REMOVE) $(TARGET).map |
||
416 | $(REMOVE) $(TARGET).obj |
||
417 | $(REMOVE) $(TARGET).a90 |
||
418 | $(REMOVE) $(TARGET).sym |
||
419 | $(REMOVE) $(TARGET).lnk |
||
420 | $(REMOVE) $(TARGET).lss |
||
421 | $(REMOVE) $(OBJ) |
||
422 | $(REMOVE) $(LST) |
||
423 | $(REMOVE) $(SRC:.c=.s) |
||
424 | $(REMOVE) $(SRC:.c=.d) |
||
425 | |||
426 | |||
427 | # Automatically generate C source code dependencies. |
||
428 | # (Code originally taken from the GNU make user manual and modified |
||
429 | # (See README.txt Credits).) |
||
430 | # |
||
431 | # Note that this will work with sh (bash) and sed that is shipped with WinAVR |
||
432 | # (see the SHELL variable defined above). |
||
433 | # This may not work with other shells or other seds. |
||
434 | # |
||
435 | %.d: %.c |
||
436 | set -e; $(CC) -MM $(ALL_CFLAGS) $< \ |
||
437 | | sed 's,\(.*\)\.o[ :]*,\1.o \1.d : ,g' > $@; \ |
||
438 | [ -s $@ ] || rm -f $@ |
||
439 | |||
440 | |||
441 | # Remove the '-' if you want to see the dependency files generated. |
||
442 | -include $(SRC:.c=.d) |
||
443 | |||
444 | |||
445 | |||
446 | # Listing of phony targets. |
||
447 | .PHONY : all begin finish end sizebefore sizeafter gccversion coff extcoff \ |
||
448 | clean clean_list program |
||
449 |