Rev 1598 | Go to most recent revision | Details | Compare with Previous | Last modification | View Log | RSS feed
Rev | Author | Line No. | Line |
---|---|---|---|
1 | ingob | 1 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
1338 | ingob | 2 | // + Copyright (c) Holger Buss, Ingo Busker |
3 | // + Nur für den privaten Gebrauch / NON-COMMERCIAL USE ONLY |
||
1 | ingob | 4 | // + www.MikroKopter.com |
5 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
1051 | killagreg | 6 | // + Es gilt für das gesamte Projekt (Hardware, Software, Binärfiles, Sourcecode und Dokumentation), |
7 | // + dass eine Nutzung (auch auszugsweise) nur für den privaten und nicht-kommerziellen Gebrauch zulässig ist. |
||
8 | // + Sollten direkte oder indirekte kommerzielle Absichten verfolgt werden, ist mit uns (info@mikrokopter.de) Kontakt |
||
9 | // + bzgl. der Nutzungsbedingungen aufzunehmen. |
||
1 | ingob | 10 | // + Eine kommerzielle Nutzung ist z.B.Verkauf von MikroKoptern, Bestückung und Verkauf von Platinen oder Bausätzen, |
11 | // + Verkauf von Luftbildaufnahmen, usw. |
||
12 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
1051 | killagreg | 13 | // + Werden Teile des Quellcodes (mit oder ohne Modifikation) weiterverwendet oder veröffentlicht, |
1 | ingob | 14 | // + unterliegen sie auch diesen Nutzungsbedingungen und diese Nutzungsbedingungen incl. Copyright müssen dann beiliegen |
15 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
16 | // + Sollte die Software (auch auszugesweise) oder sonstige Informationen des MikroKopter-Projekts |
||
17 | // + auf anderen Webseiten oder Medien veröffentlicht werden, muss unsere Webseite "http://www.mikrokopter.de" |
||
18 | // + eindeutig als Ursprung verlinkt und genannt werden |
||
19 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
20 | // + Keine Gewähr auf Fehlerfreiheit, Vollständigkeit oder Funktion |
||
21 | // + Benutzung auf eigene Gefahr |
||
22 | // + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden |
||
23 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
1338 | ingob | 24 | // + Die Portierung oder Nutzung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur |
1 | ingob | 25 | // + mit unserer Zustimmung zulässig |
26 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
27 | // + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen |
||
28 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
1051 | killagreg | 29 | // + Redistributions of source code (with or without modifications) must retain the above copyright notice, |
1 | ingob | 30 | // + this list of conditions and the following disclaimer. |
31 | // + * Neither the name of the copyright holders nor the names of contributors may be used to endorse or promote products derived |
||
32 | // + from this software without specific prior written permission. |
||
1051 | killagreg | 33 | // + * The use of this project (hardware, software, binary files, sources and documentation) is only permittet |
1 | ingob | 34 | // + for non-commercial use (directly or indirectly) |
1051 | killagreg | 35 | // + Commercial use (for excample: selling of MikroKopters, selling of PCBs, assembly, ...) is only permitted |
1 | ingob | 36 | // + with our written permission |
1051 | killagreg | 37 | // + * If sources or documentations are redistributet on other webpages, out webpage (http://www.MikroKopter.de) must be |
38 | // + clearly linked as origin |
||
1338 | ingob | 39 | // + * porting the sources to other systems or using the software on other systems (except hardware from www.mikrokopter.de) is not allowed |
1 | ingob | 40 | // + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
41 | // + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
||
42 | // + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
||
43 | // + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
||
44 | // + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
||
45 | // + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
||
46 | // + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
||
47 | // + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
||
48 | // + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
||
49 | // + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
||
1051 | killagreg | 50 | // + POSSIBILITY OF SUCH DAMAGE. |
1 | ingob | 51 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
52 | #include "main.h" |
||
53 | |||
1438 | ingob | 54 | |
173 | holgerb | 55 | unsigned char PlatinenVersion = 10; |
723 | hbuss | 56 | unsigned char SendVersionToNavi = 1; |
1232 | hbuss | 57 | unsigned char BattLowVoltageWarning = 94; |
1298 | hbuss | 58 | unsigned int FlugMinuten = 0,FlugMinutenGesamt = 0; |
1512 | holgerb | 59 | unsigned int FlugSekunden = 0; |
1444 | ingob | 60 | pVoidFnct_pVoidFnctChar_const_fmt _printf_P; |
61 | |||
1 | ingob | 62 | // -- Parametersatz aus EEPROM lesen --- |
1051 | killagreg | 63 | // number [1..5] |
1 | ingob | 64 | void ReadParameterSet(unsigned char number, unsigned char *buffer, unsigned char length) |
65 | { |
||
993 | hbuss | 66 | if((number > 5)||(number < 1)) number = 3; |
1598 | killagreg | 67 | eeprom_read_block(buffer, (void*)(EEPROM_ADR_PARAM_BEGIN + length * (number - 1)), length); |
921 | hbuss | 68 | LED_Init(); |
1 | ingob | 69 | } |
70 | |||
71 | // -- Parametersatz ins EEPROM schreiben --- |
||
1051 | killagreg | 72 | // number [1..5] |
1 | ingob | 73 | void WriteParameterSet(unsigned char number, unsigned char *buffer, unsigned char length) |
74 | { |
||
1051 | killagreg | 75 | if(number > 5) number = 5; |
993 | hbuss | 76 | if(number < 1) return; |
1598 | killagreg | 77 | eeprom_write_block(buffer, (void*)(EEPROM_ADR_PARAM_BEGIN + length * (number - 1)), length); |
78 | eeprom_write_byte((unsigned char*)(EEPROM_ADR_PARAM_LENGTH), length); // Länge der Datensätze merken |
||
79 | eeprom_write_block(buffer, (void*)(EEPROM_ADR_CHANNELS), 12); // 12 Kanäle merken |
||
1063 | killagreg | 80 | SetActiveParamSetNumber(number); |
921 | hbuss | 81 | LED_Init(); |
1 | ingob | 82 | } |
83 | |||
84 | unsigned char GetActiveParamSetNumber(void) |
||
85 | { |
||
1063 | killagreg | 86 | unsigned char set; |
1598 | killagreg | 87 | set = eeprom_read_byte((unsigned char*)(EEPROM_ADR_ACTIVE_SET)); |
1063 | killagreg | 88 | if((set > 5) || (set < 1)) |
89 | { |
||
90 | set = 3; |
||
91 | SetActiveParamSetNumber(set); // diesen Parametersatz als aktuell merken |
||
92 | } |
||
93 | return(set); |
||
1 | ingob | 94 | } |
95 | |||
1063 | killagreg | 96 | void SetActiveParamSetNumber(unsigned char number) |
97 | { |
||
98 | if(number > 5) number = 5; |
||
99 | if(number < 1) return; |
||
1598 | killagreg | 100 | eeprom_write_byte((unsigned char*)(EEPROM_ADR_ACTIVE_SET), number); // diesen Parametersatz als aktuell merken |
1063 | killagreg | 101 | } |
102 | |||
103 | |||
819 | hbuss | 104 | void CalMk3Mag(void) |
105 | { |
||
106 | static unsigned char stick = 1; |
||
107 | |||
108 | if(PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] > -20) stick = 0; |
||
109 | if((PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] < -70) && !stick) |
||
110 | { |
||
111 | stick = 1; |
||
112 | WinkelOut.CalcState++; |
||
1051 | killagreg | 113 | if(WinkelOut.CalcState > 4) |
114 | { |
||
819 | hbuss | 115 | // WinkelOut.CalcState = 0; // in Uart.c |
116 | beeptime = 1000; |
||
1051 | killagreg | 117 | } |
1232 | hbuss | 118 | else Piep(WinkelOut.CalcState,150); |
819 | hbuss | 119 | } |
120 | DebugOut.Analog[19] = WinkelOut.CalcState; |
||
121 | } |
||
122 | |||
1438 | ingob | 123 | |
124 | |||
1268 | hbuss | 125 | void LipoDetection(unsigned char print) |
126 | { |
||
127 | unsigned int timer; |
||
128 | if(print) printf("\n\rBatt:"); |
||
129 | if(EE_Parameter.UnterspannungsWarnung < 50) // automatische Zellenerkennung |
||
130 | { |
||
131 | timer = SetDelay(500); |
||
132 | if(print) while (!CheckDelay(timer)); |
||
133 | if(UBat < 130) |
||
134 | { |
||
135 | BattLowVoltageWarning = 3 * EE_Parameter.UnterspannungsWarnung; |
||
1420 | killagreg | 136 | if(print) |
1268 | hbuss | 137 | { |
138 | Piep(3,200); |
||
139 | printf(" 3 Cells "); |
||
1420 | killagreg | 140 | } |
1268 | hbuss | 141 | } |
142 | else |
||
143 | { |
||
144 | BattLowVoltageWarning = 4 * EE_Parameter.UnterspannungsWarnung; |
||
1420 | killagreg | 145 | if(print) |
1268 | hbuss | 146 | { |
147 | Piep(4,200); |
||
148 | printf(" 4 Cells "); |
||
1420 | killagreg | 149 | } |
1268 | hbuss | 150 | } |
151 | } |
||
152 | else BattLowVoltageWarning = EE_Parameter.UnterspannungsWarnung; |
||
1374 | hbuss | 153 | // if(BattLowVoltageWarning < 93) BattLowVoltageWarning = 93; |
1268 | hbuss | 154 | if(print) printf(" Low warning level: %d.%d",BattLowVoltageWarning/10,BattLowVoltageWarning%10); |
155 | } |
||
156 | |||
1 | ingob | 157 | //############################################################################ |
158 | //Hauptprogramm |
||
159 | int main (void) |
||
160 | //############################################################################ |
||
161 | { |
||
1424 | ingob | 162 | unsigned int timer,i,timer2 = 0, timerPolling; |
1479 | killagreg | 163 | unsigned char RequiredMotors = 0; |
164 | |||
1051 | killagreg | 165 | DDRB = 0x00; |
166 | PORTB = 0x00; |
||
188 | holgerb | 167 | for(timer = 0; timer < 1000; timer++); // verzögern |
1051 | killagreg | 168 | if(PINB & 0x01) |
918 | hbuss | 169 | { |
1051 | killagreg | 170 | if(PINB & 0x02) PlatinenVersion = 13; |
171 | else PlatinenVersion = 11; |
||
918 | hbuss | 172 | } |
1051 | killagreg | 173 | else |
1021 | hbuss | 174 | { |
1051 | killagreg | 175 | if(PINB & 0x02) PlatinenVersion = 20; |
176 | else PlatinenVersion = 10; |
||
1021 | hbuss | 177 | } |
178 | |||
173 | holgerb | 179 | DDRC = 0x81; // SCL |
1036 | hbuss | 180 | DDRC |=0x40; // HEF4017 Reset |
1 | ingob | 181 | PORTC = 0xff; // Pullup SDA |
182 | DDRB = 0x1B; // LEDs und Druckoffset |
||
183 | PORTB = 0x01; // LED_Rot |
||
184 | DDRD = 0x3E; // Speaker & TXD & J3 J4 J5 |
||
1153 | hbuss | 185 | PORTD = 0x47; // LED |
1171 | hbuss | 186 | HEF4017R_ON; |
1 | ingob | 187 | MCUSR &=~(1<<WDRF); |
188 | WDTCSR |= (1<<WDCE)|(1<<WDE); |
||
189 | WDTCSR = 0; |
||
190 | |||
191 | beeptime = 2000; |
||
192 | StickGier = 0; PPM_in[K_GAS] = 0;StickRoll = 0; StickNick = 0; |
||
1111 | hbuss | 193 | if(PlatinenVersion >= 20) GIER_GRAD_FAKTOR = 1160; else GIER_GRAD_FAKTOR = 1291; // unterschiedlich für ME und ENC |
1 | ingob | 194 | ROT_OFF; |
1479 | killagreg | 195 | |
1 | ingob | 196 | Timer_Init(); |
1156 | hbuss | 197 | TIMER2_Init(); |
1 | ingob | 198 | UART_Init(); |
199 | rc_sum_init(); |
||
200 | ADC_Init(); |
||
201 | i2c_init(); |
||
597 | ingob | 202 | SPI_MasterInit(); |
1486 | killagreg | 203 | Capacity_Init(); |
1435 | killagreg | 204 | LIBFC_Init(); |
1431 | ingob | 205 | GRN_ON; |
206 | sei(); |
||
1344 | hbuss | 207 | |
1377 | hbuss | 208 | ReadParameterSet(3, (unsigned char *) &EE_Parameter.Kanalbelegung[0], 13); // read only the first bytes |
1435 | killagreg | 209 | |
210 | |||
1598 | killagreg | 211 | if((eeprom_read_byte((unsigned char*)(EEPROM_ADR_MIXER_TABLE)) == MIXER_REVISION) && // Check Revision in the first Byte |
212 | (eeprom_read_byte((unsigned char*)(EEPROM_ADR_VALID)) != 0xff)) // Settings reset via Koptertool |
||
1209 | hbuss | 213 | { |
1254 | killagreg | 214 | unsigned char i; |
1598 | killagreg | 215 | eeprom_read_block(&Mixer, (unsigned char*)(EEPROM_ADR_MIXER_TABLE), sizeof(Mixer)); |
1209 | hbuss | 216 | for(i=0; i<16;i++) { if(Mixer.Motor[i][0] > 0) RequiredMotors++;} |
1254 | killagreg | 217 | } |
1209 | hbuss | 218 | else // default |
219 | { |
||
1254 | killagreg | 220 | unsigned char i; |
1211 | hbuss | 221 | printf("\n\rGenerating default Mixer Table"); |
1209 | hbuss | 222 | for(i=0; i<16;i++) { Mixer.Motor[i][0] = 0;Mixer.Motor[i][1] = 0;Mixer.Motor[i][2] = 0;Mixer.Motor[i][3] = 0;}; |
223 | // default = Quadro |
||
224 | Mixer.Motor[0][0] = 64; Mixer.Motor[0][1] = +64; Mixer.Motor[0][2] = 0; Mixer.Motor[0][3] = +64; |
||
225 | Mixer.Motor[1][0] = 64; Mixer.Motor[1][1] = -64; Mixer.Motor[1][2] = 0; Mixer.Motor[1][3] = +64; |
||
226 | Mixer.Motor[2][0] = 64; Mixer.Motor[2][1] = 0; Mixer.Motor[2][2] = -64; Mixer.Motor[2][3] = -64; |
||
227 | Mixer.Motor[3][0] = 64; Mixer.Motor[3][1] = 0; Mixer.Motor[3][2] = +64; Mixer.Motor[3][3] = -64; |
||
1211 | hbuss | 228 | Mixer.Revision = MIXER_REVISION; |
1254 | killagreg | 229 | memcpy(Mixer.Name, "Quadro\0", 11); |
1598 | killagreg | 230 | eeprom_write_block(&Mixer, (void*)(EEPROM_ADR_MIXER_TABLE), sizeof(Mixer)); |
1209 | hbuss | 231 | } |
232 | printf("\n\rMixer-Config: '%s' (%u Motors)",Mixer.Name,RequiredMotors); |
||
1431 | ingob | 233 | |
1211 | hbuss | 234 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
235 | // + Check connected BL-Ctrls |
||
236 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
1591 | holgerb | 237 | motorread = 0; UpdateMotor = 0; SendMotorData(); while(!UpdateMotor); motorread = 0; // read the first I2C-Data |
1211 | hbuss | 238 | printf("\n\rFound BL-Ctrl: "); |
1591 | holgerb | 239 | timer = SetDelay(4000); |
1420 | killagreg | 240 | |
1211 | hbuss | 241 | for(i=0; i < MAX_MOTORS; i++) |
242 | { |
||
243 | UpdateMotor = 0; |
||
244 | SendMotorData(); |
||
245 | while(!UpdateMotor); |
||
1591 | holgerb | 246 | if(Mixer.Motor[i][0] > 0) // wait max 4 sec for the BL-Ctrls to wake up |
1232 | hbuss | 247 | { |
1479 | killagreg | 248 | while(!CheckDelay(timer) && !(Motor[i].State & MOTOR_STATE_PRESENT_MASK) ) {UpdateMotor = 0; SendMotorData(); while(!UpdateMotor);}; |
1232 | hbuss | 249 | } |
1479 | killagreg | 250 | if(Motor[i].State & MOTOR_STATE_PRESENT_MASK) printf("%d ",i+1); |
1211 | hbuss | 251 | } |
252 | for(i=0; i < MAX_MOTORS; i++) |
||
253 | { |
||
1479 | killagreg | 254 | if(!(Motor[i].State & MOTOR_STATE_PRESENT_MASK) && Mixer.Motor[i][0] > 0) |
1320 | hbuss | 255 | { |
256 | printf("\n\r\n\r!! MISSING BL-CTRL: %d !!",i+1); |
||
257 | ServoActive = 1; // just in case the FC would be used as camera-stabilizer |
||
1420 | killagreg | 258 | } |
1479 | killagreg | 259 | Motor[i].State &= ~MOTOR_STATE_ERROR_MASK; // clear error counter |
1211 | hbuss | 260 | } |
1320 | hbuss | 261 | printf("\n\r==================================="); |
1356 | hbuss | 262 | SendMotorData(); |
1403 | hbuss | 263 | //printf("\n size: %u",STRUCT_PARAM_LAENGE); |
1320 | hbuss | 264 | |
1211 | hbuss | 265 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
266 | // + Check Settings |
||
267 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
1598 | killagreg | 268 | if(eeprom_read_byte((unsigned char*)(EEPROM_ADR_VALID)) != EE_DATENREVISION) |
1051 | killagreg | 269 | { |
1 | ingob | 270 | DefaultKonstanten1(); |
1171 | hbuss | 271 | printf("\n\rInit. EEPROM"); |
1051 | killagreg | 272 | for (unsigned char i=1;i<6;i++) |
1 | ingob | 273 | { |
395 | hbuss | 274 | if(i==2) DefaultKonstanten2(); // Kamera |
275 | if(i==3) DefaultKonstanten3(); // Beginner |
||
276 | if(i>3) DefaultKonstanten2(); // Kamera |
||
1254 | killagreg | 277 | if(PlatinenVersion >= 20) |
278 | { |
||
1167 | hbuss | 279 | EE_Parameter.Gyro_D = 5; |
1111 | hbuss | 280 | EE_Parameter.Driftkomp = 0; |
281 | EE_Parameter.GyroAccFaktor = 27; |
||
282 | EE_Parameter.WinkelUmschlagNick = 78; |
||
283 | EE_Parameter.WinkelUmschlagRoll = 78; |
||
284 | } |
||
1171 | hbuss | 285 | // valid Stick-Settings? |
1598 | killagreg | 286 | if(eeprom_read_byte((unsigned char*)(EEPROM_ADR_CHANNELS)) < 12 && eeprom_read_byte((unsigned char*)(EEPROM_ADR_CHANNELS+1)) < 12 && eeprom_read_byte((unsigned char*)(EEPROM_ADR_CHANNELS+2)) < 12 && eeprom_read_byte((unsigned char*)(EEPROM_ADR_CHANNELS+3)) < 12) |
1171 | hbuss | 287 | { |
1598 | killagreg | 288 | EE_Parameter.Kanalbelegung[0] = eeprom_read_byte((unsigned char*)(EEPROM_ADR_CHANNELS+0)); |
289 | EE_Parameter.Kanalbelegung[1] = eeprom_read_byte((unsigned char*)(EEPROM_ADR_CHANNELS+1)); |
||
290 | EE_Parameter.Kanalbelegung[2] = eeprom_read_byte((unsigned char*)(EEPROM_ADR_CHANNELS+2)); |
||
291 | EE_Parameter.Kanalbelegung[3] = eeprom_read_byte((unsigned char*)(EEPROM_ADR_CHANNELS+3)); |
||
292 | EE_Parameter.Kanalbelegung[4] = eeprom_read_byte((unsigned char*)(EEPROM_ADR_CHANNELS+4)); |
||
293 | EE_Parameter.Kanalbelegung[5] = eeprom_read_byte((unsigned char*)(EEPROM_ADR_CHANNELS+5)); |
||
294 | EE_Parameter.Kanalbelegung[6] = eeprom_read_byte((unsigned char*)(EEPROM_ADR_CHANNELS+6)); |
||
295 | EE_Parameter.Kanalbelegung[7] = eeprom_read_byte((unsigned char*)(EEPROM_ADR_CHANNELS+7)); |
||
1420 | killagreg | 296 | |
1598 | killagreg | 297 | if(eeprom_read_byte((unsigned char*)(EEPROM_ADR_CHANNELS+8)) < 0xFF) |
1377 | hbuss | 298 | { |
1598 | killagreg | 299 | EE_Parameter.Kanalbelegung[K_POTI5] = eeprom_read_byte((unsigned char*)(EEPROM_ADR_CHANNELS+8)); |
300 | EE_Parameter.Kanalbelegung[K_POTI6] = eeprom_read_byte((unsigned char*)(EEPROM_ADR_CHANNELS+9)); |
||
301 | EE_Parameter.Kanalbelegung[K_POTI7] = eeprom_read_byte((unsigned char*)(EEPROM_ADR_CHANNELS+10)); |
||
302 | EE_Parameter.Kanalbelegung[K_POTI8] = eeprom_read_byte((unsigned char*)(EEPROM_ADR_CHANNELS+11)); |
||
1420 | killagreg | 303 | } |
304 | else |
||
1377 | hbuss | 305 | { |
306 | EE_Parameter.Kanalbelegung[K_POTI5] = 9; |
||
307 | EE_Parameter.Kanalbelegung[K_POTI6] = 10; |
||
308 | EE_Parameter.Kanalbelegung[K_POTI7] = 11; |
||
309 | EE_Parameter.Kanalbelegung[K_POTI8] = 12; |
||
310 | } |
||
1171 | hbuss | 311 | if(i==1) printf(": Generating Default-Parameter using old Stick Settings"); |
312 | } else DefaultStickMapping(); |
||
1 | ingob | 313 | WriteParameterSet(i, (unsigned char *) &EE_Parameter.Kanalbelegung[0], STRUCT_PARAM_LAENGE); |
1051 | killagreg | 314 | } |
1063 | killagreg | 315 | SetActiveParamSetNumber(3); // default-Setting |
1598 | killagreg | 316 | eeprom_write_byte((unsigned char*)(EEPROM_ADR_VALID), EE_DATENREVISION); |
1 | ingob | 317 | } |
1435 | killagreg | 318 | |
1598 | killagreg | 319 | FlugMinuten = (int)eeprom_read_byte((unsigned char*)(EEPROM_ADR_MINUTES2)) * 256 + (int)eeprom_read_byte((unsigned char*)(EEPROM_ADR_MINUTES2+1)); |
320 | FlugMinutenGesamt = (int)eeprom_read_byte((unsigned char*)(EEPROM_ADR_MINUTES)) * 256 + (int)eeprom_read_byte((unsigned char*)(EEPROM_ADR_MINUTES+1)); |
||
1350 | hbuss | 321 | if(FlugMinutenGesamt == 0xffff || FlugMinuten == 0xffff) |
1298 | hbuss | 322 | { |
323 | FlugMinuten = 0; |
||
324 | FlugMinutenGesamt = 0; |
||
325 | } |
||
326 | printf("\n\rFlight-time %u min Total:%u min" ,FlugMinuten,FlugMinutenGesamt); |
||
327 | |||
1598 | killagreg | 328 | if(eeprom_read_byte((unsigned char*)(EEPROM_ADR_ACC_NICK)) > 4) |
513 | hbuss | 329 | { |
1211 | hbuss | 330 | printf("\n\rACC not calibrated !"); |
513 | hbuss | 331 | } |
1051 | killagreg | 332 | |
1 | ingob | 333 | ReadParameterSet(GetActiveParamSetNumber(), (unsigned char *) &EE_Parameter.Kanalbelegung[0], STRUCT_PARAM_LAENGE); |
1211 | hbuss | 334 | printf("\n\rUsing parameterset %d", GetActiveParamSetNumber()); |
1 | ingob | 335 | |
1051 | killagreg | 336 | |
1529 | killagreg | 337 | //if(EE_Parameter.GlobalConfig & CFG_HOEHENREGELUNG) |
1051 | killagreg | 338 | { |
1211 | hbuss | 339 | printf("\n\rCalibrating pressure sensor.."); |
1051 | killagreg | 340 | timer = SetDelay(1000); |
1 | ingob | 341 | SucheLuftruckOffset(); |
342 | while (!CheckDelay(timer)); |
||
343 | printf("OK\n\r"); |
||
344 | } |
||
1051 | killagreg | 345 | |
1 | ingob | 346 | SetNeutral(); |
347 | |||
348 | ROT_OFF; |
||
1051 | killagreg | 349 | |
1 | ingob | 350 | beeptime = 2000; |
1051 | killagreg | 351 | ExternControl.Digital[0] = 0x55; |
1 | ingob | 352 | |
1051 | killagreg | 353 | |
1211 | hbuss | 354 | printf("\n\rControl: "); |
1 | ingob | 355 | if (EE_Parameter.GlobalConfig & CFG_HEADING_HOLD) printf("HeadingHold"); |
1211 | hbuss | 356 | else printf("Normal (ACC-Mode)"); |
1051 | killagreg | 357 | |
1 | ingob | 358 | LcdClear(); |
173 | holgerb | 359 | I2CTimeout = 5000; |
819 | hbuss | 360 | WinkelOut.Orientation = 1; |
1268 | hbuss | 361 | LipoDetection(1); |
1435 | killagreg | 362 | |
363 | LIBFC_ReceiverInit(); |
||
1444 | ingob | 364 | |
1232 | hbuss | 365 | printf("\n\r===================================\n\r"); |
1320 | hbuss | 366 | //SpektrumBinding(); |
1350 | hbuss | 367 | timer = SetDelay(2000); |
1424 | ingob | 368 | timerPolling = SetDelay(250); |
1529 | killagreg | 369 | |
1 | ingob | 370 | while (1) |
371 | { |
||
1420 | killagreg | 372 | |
1424 | ingob | 373 | if(CheckDelay(timerPolling)) |
1419 | ingob | 374 | { |
1424 | ingob | 375 | timerPolling = SetDelay(100); |
1435 | killagreg | 376 | LIBFC_Polling(); |
1419 | ingob | 377 | } |
1420 | killagreg | 378 | |
1419 | ingob | 379 | if(UpdateMotor && AdReady) // ReglerIntervall |
1051 | killagreg | 380 | { |
1171 | hbuss | 381 | UpdateMotor=0; |
819 | hbuss | 382 | if(WinkelOut.CalcState) CalMk3Mag(); |
1051 | killagreg | 383 | else MotorRegler(); |
1 | ingob | 384 | SendMotorData(); |
385 | ROT_OFF; |
||
386 | if(SenderOkay) SenderOkay--; |
||
1603 | killagreg | 387 | else |
388 | { |
||
389 | TIMSK1 |= _BV(ICIE1); // enable PPM-Input |
||
390 | PPM_in[0] = 0; // set RSSI to zero on data timeout |
||
391 | } |
||
1420 | killagreg | 392 | //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
1481 | holgerb | 393 | //if(HoehenReglerAktiv && NaviDataOkay && SenderOkay < 160 && SenderOkay > 10 && FromNaviCtrl_Value.SerialDataOkay > 220) SenderOkay = 160; |
394 | //if(HoehenReglerAktiv && NaviDataOkay && SenderOkay < 101 && SenderOkay > 10 && FromNaviCtrl_Value.SerialDataOkay > 1) SenderOkay = 101; |
||
1309 | hbuss | 395 | //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
1420 | killagreg | 396 | |
1210 | hbuss | 397 | if(!--I2CTimeout || MissingMotor) |
173 | holgerb | 398 | { |
1254 | killagreg | 399 | if(!I2CTimeout) |
1210 | hbuss | 400 | { |
401 | i2c_reset(); |
||
402 | I2CTimeout = 5; |
||
1322 | hbuss | 403 | DebugOut.Analog[28]++; // I2C-Error |
1423 | hbuss | 404 | FCFlags |= FCFLAG_I2CERR; |
1322 | hbuss | 405 | } |
1051 | killagreg | 406 | if((BeepMuster == 0xffff) && MotorenEin) |
407 | { |
||
173 | holgerb | 408 | beeptime = 10000; |
409 | BeepMuster = 0x0080; |
||
1051 | killagreg | 410 | } |
1 | ingob | 411 | } |
1051 | killagreg | 412 | else |
1 | ingob | 413 | { |
1051 | killagreg | 414 | ROT_OFF; |
1423 | hbuss | 415 | if(!beeptime) FCFlags &= ~FCFLAG_I2CERR; |
1 | ingob | 416 | } |
805 | hbuss | 417 | if(SIO_DEBUG && (!UpdateMotor || !MotorenEin)) |
1 | ingob | 418 | { |
419 | DatenUebertragung(); |
||
420 | BearbeiteRxDaten(); |
||
421 | } |
||
1254 | killagreg | 422 | else BearbeiteRxDaten(); |
423 | if(CheckDelay(timer)) |
||
424 | { |
||
1512 | holgerb | 425 | static unsigned char second; |
1420 | killagreg | 426 | timer += 20; // 20 ms interval |
427 | if(PcZugriff) PcZugriff--; |
||
428 | else |
||
429 | { |
||
430 | ExternControl.Config = 0; |
||
431 | ExternStickNick = 0; |
||
432 | ExternStickRoll = 0; |
||
433 | ExternStickGier = 0; |
||
434 | if(BeepMuster == 0xffff && SenderOkay == 0) |
||
435 | { |
||
436 | beeptime = 15000; |
||
437 | BeepMuster = 0x0c00; |
||
438 | } |
||
439 | } |
||
440 | if(NaviDataOkay) |
||
441 | { |
||
442 | NaviDataOkay--; |
||
443 | FCFlags &= ~FCFLAG_SPI_RX_ERR; |
||
444 | } |
||
445 | else |
||
446 | { |
||
447 | GPS_Nick = 0; |
||
448 | GPS_Roll = 0; |
||
1423 | hbuss | 449 | if(!beeptime) FCFlags |= FCFLAG_SPI_RX_ERR; |
1420 | killagreg | 450 | } |
1309 | hbuss | 451 | if(UBat < BattLowVoltageWarning) |
1254 | killagreg | 452 | { |
1420 | killagreg | 453 | FCFlags |= FCFLAG_LOWBAT; |
1254 | killagreg | 454 | if(BeepMuster == 0xffff) |
455 | { |
||
456 | beeptime = 6000; |
||
457 | BeepMuster = 0x0300; |
||
458 | } |
||
459 | } |
||
1423 | hbuss | 460 | else if(!beeptime) FCFlags &= ~FCFLAG_LOWBAT; |
1420 | killagreg | 461 | |
1254 | killagreg | 462 | SPI_StartTransmitPacket(); |
463 | SendSPI = 4; |
||
1320 | hbuss | 464 | if(!MotorenEin) timer2 = 1450; // 0,5 Minuten aufrunden |
1529 | killagreg | 465 | else |
1512 | holgerb | 466 | if(++second == 49) |
467 | { |
||
468 | second = 0; |
||
469 | FlugSekunden++; |
||
470 | } |
||
1529 | killagreg | 471 | |
1320 | hbuss | 472 | if(++timer2 == 2930) // eine Minute |
1298 | hbuss | 473 | { |
474 | timer2 = 0; |
||
475 | FlugMinuten++; |
||
476 | FlugMinutenGesamt++; |
||
1598 | killagreg | 477 | eeprom_write_byte((unsigned char*)(EEPROM_ADR_MINUTES2),FlugMinuten / 256); |
478 | eeprom_write_byte((unsigned char*)(EEPROM_ADR_MINUTES2+1),FlugMinuten % 256); |
||
479 | eeprom_write_byte((unsigned char*)(EEPROM_ADR_MINUTES),FlugMinutenGesamt / 256); |
||
480 | eeprom_write_byte((unsigned char*)(EEPROM_ADR_MINUTES+1),FlugMinutenGesamt % 256); |
||
1344 | hbuss | 481 | timer = SetDelay(20); // falls "timer += 20;" mal nicht geht |
1298 | hbuss | 482 | } |
1254 | killagreg | 483 | } |
921 | hbuss | 484 | LED_Update(); |
1486 | killagreg | 485 | Capacity_Update(); |
604 | hbuss | 486 | } |
723 | hbuss | 487 | if(!SendSPI) { SPI_TransmitByte(); } |
1 | ingob | 488 | } |
489 | return (1); |
||
490 | } |
||
491 | |||
1219 | hbuss | 492 |