Rev 1639 | Go to most recent revision | Details | Compare with Previous | Last modification | View Log | RSS feed
Rev | Author | Line No. | Line |
---|---|---|---|
1 | ingob | 1 | /*####################################################################################### |
2 | Flight Control |
||
3 | #######################################################################################*/ |
||
4 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
1338 | ingob | 5 | // + Copyright (c) Holger Buss, Ingo Busker |
6 | // + Nur für den privaten Gebrauch / NON-COMMERCIAL USE ONLY |
||
1 | ingob | 7 | // + www.MikroKopter.com |
8 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
1051 | killagreg | 9 | // + Es gilt für das gesamte Projekt (Hardware, Software, Binärfiles, Sourcecode und Dokumentation), |
10 | // + dass eine Nutzung (auch auszugsweise) nur für den privaten (nicht-kommerziellen) Gebrauch zulässig ist. |
||
11 | // + Sollten direkte oder indirekte kommerzielle Absichten verfolgt werden, ist mit uns (info@mikrokopter.de) Kontakt |
||
12 | // + bzgl. der Nutzungsbedingungen aufzunehmen. |
||
1 | ingob | 13 | // + Eine kommerzielle Nutzung ist z.B.Verkauf von MikroKoptern, Bestückung und Verkauf von Platinen oder Bausätzen, |
14 | // + Verkauf von Luftbildaufnahmen, usw. |
||
15 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
1051 | killagreg | 16 | // + Werden Teile des Quellcodes (mit oder ohne Modifikation) weiterverwendet oder veröffentlicht, |
1 | ingob | 17 | // + unterliegen sie auch diesen Nutzungsbedingungen und diese Nutzungsbedingungen incl. Copyright müssen dann beiliegen |
18 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
19 | // + Sollte die Software (auch auszugesweise) oder sonstige Informationen des MikroKopter-Projekts |
||
20 | // + auf anderen Webseiten oder sonstigen Medien veröffentlicht werden, muss unsere Webseite "http://www.mikrokopter.de" |
||
21 | // + eindeutig als Ursprung verlinkt werden |
||
22 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
23 | // + Keine Gewähr auf Fehlerfreiheit, Vollständigkeit oder Funktion |
||
24 | // + Benutzung auf eigene Gefahr |
||
25 | // + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden |
||
26 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
1338 | ingob | 27 | // + Die Portierung oder Nutzung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur |
1 | ingob | 28 | // + mit unserer Zustimmung zulässig |
29 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
30 | // + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen |
||
31 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
1051 | killagreg | 32 | // + Redistributions of source code (with or without modifications) must retain the above copyright notice, |
1 | ingob | 33 | // + this list of conditions and the following disclaimer. |
34 | // + * Neither the name of the copyright holders nor the names of contributors may be used to endorse or promote products derived |
||
35 | // + from this software without specific prior written permission. |
||
1051 | killagreg | 36 | // + * The use of this project (hardware, software, binary files, sources and documentation) is only permittet |
1 | ingob | 37 | // + for non-commercial use (directly or indirectly) |
1051 | killagreg | 38 | // + Commercial use (for excample: selling of MikroKopters, selling of PCBs, assembly, ...) is only permitted |
1 | ingob | 39 | // + with our written permission |
1051 | killagreg | 40 | // + * If sources or documentations are redistributet on other webpages, out webpage (http://www.MikroKopter.de) must be |
41 | // + clearly linked as origin |
||
1338 | ingob | 42 | // + * porting the sources to other systems or using the software on other systems (except hardware from www.mikrokopter.de) is not allowed |
1 | ingob | 43 | // + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
44 | // + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
||
45 | // + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
||
46 | // + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
||
47 | // + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
||
48 | // + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
||
49 | // + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
||
1322 | hbuss | 50 | // + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
51 | // + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
||
1 | ingob | 52 | // + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
1051 | killagreg | 53 | // + POSSIBILITY OF SUCH DAMAGE. |
1 | ingob | 54 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
55 | |||
56 | #include "main.h" |
||
1320 | hbuss | 57 | #include "mymath.h" |
1330 | killagreg | 58 | #include "isqrt.h" |
1 | ingob | 59 | |
1352 | hbuss | 60 | unsigned char h,m,s; |
61 | unsigned int BaroExpandActive = 0; |
||
173 | holgerb | 62 | volatile unsigned int I2CTimeout = 100; |
1153 | hbuss | 63 | int MesswertNick,MesswertRoll,MesswertGier,MesswertGierBias, RohMesswertNick,RohMesswertRoll; |
1166 | hbuss | 64 | int TrimNick, TrimRoll; |
927 | hbuss | 65 | int AdNeutralNick = 0,AdNeutralRoll = 0,AdNeutralGier = 0,StartNeutralRoll = 0,StartNeutralNick = 0; |
66 | int Mittelwert_AccNick, Mittelwert_AccRoll,Mittelwert_AccHoch, NeutralAccX=0, NeutralAccY=0; |
||
805 | hbuss | 67 | int NaviAccNick, NaviAccRoll,NaviCntAcc = 0; |
1639 | holgerb | 68 | int NeutralAccZ = 0; |
1 | ingob | 69 | unsigned char CosinusNickWinkel = 0, CosinusRollWinkel = 0; |
693 | hbuss | 70 | long IntegralNick = 0,IntegralNick2 = 0; |
71 | long IntegralRoll = 0,IntegralRoll2 = 0; |
||
72 | long IntegralAccNick = 0,IntegralAccRoll = 0,IntegralAccZ = 0; |
||
73 | long Integral_Gier = 0; |
||
74 | long Mess_IntegralNick = 0,Mess_IntegralNick2 = 0; |
||
75 | long Mess_IntegralRoll = 0,Mess_IntegralRoll2 = 0; |
||
76 | long Mess_Integral_Gier = 0,Mess_Integral_Gier2 = 0; |
||
77 | long MittelIntegralNick,MittelIntegralRoll,MittelIntegralNick2,MittelIntegralRoll2; |
||
1 | ingob | 78 | volatile long Mess_Integral_Hoch = 0; |
1153 | hbuss | 79 | int KompassValue = 0; |
80 | int KompassStartwert = 0; |
||
81 | int KompassRichtung = 0; |
||
693 | hbuss | 82 | unsigned int KompassSignalSchlecht = 500; |
855 | hbuss | 83 | unsigned char MAX_GAS,MIN_GAS; |
1 | ingob | 84 | unsigned char HoehenReglerAktiv = 0; |
880 | hbuss | 85 | unsigned char TrichterFlug = 0; |
395 | hbuss | 86 | long Umschlag180Nick = 250000L, Umschlag180Roll = 250000L; |
693 | hbuss | 87 | long ErsatzKompass; |
88 | int ErsatzKompassInGrad; // Kompasswert in Grad |
||
89 | int GierGyroFehler = 0; |
||
1211 | hbuss | 90 | char GyroFaktor,GyroFaktorGier; |
91 | char IntegralFaktor,IntegralFaktorGier; |
||
1153 | hbuss | 92 | int DiffNick,DiffRoll; |
1377 | hbuss | 93 | //int Poti1 = 0, Poti2 = 0, Poti3 = 0, Poti4 = 0, Poti5 = 0, Poti6 = 0, Poti7 = 0, Poti8 = 0; |
1391 | killagreg | 94 | unsigned char Poti[9] = {0,0,0,0,0,0,0,0}; |
1 | ingob | 95 | volatile unsigned char SenderOkay = 0; |
595 | hbuss | 96 | int StickNick = 0,StickRoll = 0,StickGier = 0,StickGas = 0; |
1 | ingob | 97 | char MotorenEin = 0; |
1622 | killagreg | 98 | unsigned char RequiredMotors = 0; |
1246 | killagreg | 99 | long HoehenWert = 0; |
100 | long SollHoehe = 0; |
||
498 | hbuss | 101 | int LageKorrekturRoll = 0,LageKorrekturNick = 0; |
1153 | hbuss | 102 | //float Ki = FAKTOR_I; |
103 | int Ki = 10300 / 33; |
||
395 | hbuss | 104 | unsigned char Looping_Nick = 0,Looping_Roll = 0; |
105 | unsigned char Looping_Links = 0, Looping_Rechts = 0, Looping_Unten = 0, Looping_Oben = 0; |
||
1 | ingob | 106 | |
107 | unsigned char Parameter_Luftdruck_D = 48; // Wert : 0-250 |
||
108 | unsigned char Parameter_MaxHoehe = 251; // Wert : 0-250 |
||
109 | unsigned char Parameter_Hoehe_P = 16; // Wert : 0-32 |
||
110 | unsigned char Parameter_Hoehe_ACC_Wirkung = 58; // Wert : 0-250 |
||
111 | unsigned char Parameter_KompassWirkung = 64; // Wert : 0-250 |
||
1283 | hbuss | 112 | unsigned char Parameter_Hoehe_GPS_Z = 64; // Wert : 0-250 |
1111 | hbuss | 113 | unsigned char Parameter_Gyro_D = 8; // Wert : 0-250 |
173 | holgerb | 114 | unsigned char Parameter_Gyro_P = 150; // Wert : 10-250 |
1 | ingob | 115 | unsigned char Parameter_Gyro_I = 150; // Wert : 0-250 |
1322 | hbuss | 116 | unsigned char Parameter_Gyro_Gier_P = 150; // Wert : 10-250 |
117 | unsigned char Parameter_Gyro_Gier_I = 150; // Wert : 10-250 |
||
1 | ingob | 118 | unsigned char Parameter_Gier_P = 2; // Wert : 1-20 |
119 | unsigned char Parameter_I_Faktor = 10; // Wert : 1-20 |
||
120 | unsigned char Parameter_UserParam1 = 0; |
||
121 | unsigned char Parameter_UserParam2 = 0; |
||
122 | unsigned char Parameter_UserParam3 = 0; |
||
123 | unsigned char Parameter_UserParam4 = 0; |
||
499 | hbuss | 124 | unsigned char Parameter_UserParam5 = 0; |
125 | unsigned char Parameter_UserParam6 = 0; |
||
126 | unsigned char Parameter_UserParam7 = 0; |
||
127 | unsigned char Parameter_UserParam8 = 0; |
||
1 | ingob | 128 | unsigned char Parameter_ServoNickControl = 100; |
1232 | hbuss | 129 | unsigned char Parameter_ServoRollControl = 100; |
173 | holgerb | 130 | unsigned char Parameter_LoopGasLimit = 70; |
1120 | hbuss | 131 | unsigned char Parameter_AchsKopplung1 = 90; |
132 | unsigned char Parameter_AchsKopplung2 = 65; |
||
133 | unsigned char Parameter_CouplingYawCorrection = 64; |
||
134 | //unsigned char Parameter_AchsGegenKopplung1 = 0; |
||
499 | hbuss | 135 | unsigned char Parameter_DynamicStability = 100; |
921 | hbuss | 136 | unsigned char Parameter_J16Bitmask; // for the J16 Output |
137 | unsigned char Parameter_J16Timing; // for the J16 Output |
||
138 | unsigned char Parameter_J17Bitmask; // for the J17 Output |
||
139 | unsigned char Parameter_J17Timing; // for the J17 Output |
||
140 | unsigned char Parameter_NaviGpsModeControl; // Parameters for the Naviboard |
||
1051 | killagreg | 141 | unsigned char Parameter_NaviGpsGain; |
142 | unsigned char Parameter_NaviGpsP; |
||
143 | unsigned char Parameter_NaviGpsI; |
||
144 | unsigned char Parameter_NaviGpsD; |
||
145 | unsigned char Parameter_NaviGpsACC; |
||
993 | hbuss | 146 | unsigned char Parameter_NaviOperatingRadius; |
147 | unsigned char Parameter_NaviWindCorrection; |
||
148 | unsigned char Parameter_NaviSpeedCompensation; |
||
921 | hbuss | 149 | unsigned char Parameter_ExternalControl; |
1403 | hbuss | 150 | unsigned char Parameter_Servo3,Parameter_Servo4,Parameter_Servo5; |
1622 | killagreg | 151 | |
492 | hbuss | 152 | signed int ExternStickNick = 0,ExternStickRoll = 0,ExternStickGier = 0, ExternHoehenValue = -20; |
614 | hbuss | 153 | int MaxStickNick = 0,MaxStickRoll = 0; |
871 | hbuss | 154 | unsigned int modell_fliegt = 0; |
1420 | killagreg | 155 | volatile unsigned char FCFlags = 0; |
1121 | hbuss | 156 | long GIER_GRAD_FAKTOR = 1291; |
1153 | hbuss | 157 | signed int KopplungsteilNickRoll,KopplungsteilRollNick; |
1209 | hbuss | 158 | signed int tmp_motorwert[MAX_MOTORS]; |
1591 | holgerb | 159 | char VarioCharacter = ' '; |
160 | |||
1391 | killagreg | 161 | #define LIMIT_MIN(value, min) {if(value <= min) value = min;} |
162 | #define LIMIT_MAX(value, max) {if(value >= max) value = max;} |
||
163 | #define LIMIT_MIN_MAX(value, min, max) {if(value <= min) value = min; else if(value >= max) value = max;} |
||
1155 | hbuss | 164 | |
1622 | killagreg | 165 | |
1166 | hbuss | 166 | int MotorSmoothing(int neu, int alt) |
167 | { |
||
168 | int motor; |
||
169 | if(neu > alt) motor = (1*(int)alt + neu) / 2; |
||
170 | else motor = neu - (alt - neu)*1; |
||
171 | //if(Poti2 < 20) return(neu); |
||
172 | return(motor); |
||
173 | } |
||
174 | |||
1639 | holgerb | 175 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
176 | // Debugwerte zuordnen |
||
177 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
178 | void CopyDebugValues(void) |
||
179 | { |
||
180 | |||
181 | DebugOut.Analog[0] = IntegralNick / (EE_Parameter.GyroAccFaktor * 4); |
||
182 | DebugOut.Analog[1] = IntegralRoll / (EE_Parameter.GyroAccFaktor * 4); |
||
183 | DebugOut.Analog[2] = Mittelwert_AccNick / 4; |
||
184 | DebugOut.Analog[3] = Mittelwert_AccRoll / 4; |
||
185 | DebugOut.Analog[4] = MesswertGier; |
||
186 | DebugOut.Analog[5] = HoehenWert/5; |
||
187 | DebugOut.Analog[6] = AdWertAccHoch;// Aktuell_az;//(Mess_Integral_Hoch / 512);//Aktuell_az; |
||
188 | DebugOut.Analog[8] = KompassValue; |
||
189 | DebugOut.Analog[9] = UBat; |
||
190 | DebugOut.Analog[10] = SenderOkay; |
||
191 | DebugOut.Analog[11] = ErsatzKompass / GIER_GRAD_FAKTOR; |
||
192 | DebugOut.Analog[16] = NeutralAccZ; |
||
193 | DebugOut.Analog[18] = TransmitBlConfig; |
||
194 | //DebugOut.Analog[16] = Motor[0].Temperature; |
||
195 | //DebugOut.Analog[17] = FromNaviCtrl_Value.Distance; |
||
196 | // DebugOut.Analog[18] = VarioMeter; |
||
197 | // DebugOut.Analog[19] = WinkelOut.CalcState; |
||
198 | DebugOut.Analog[20] = ServoNickValue; |
||
199 | DebugOut.Analog[22] = Capacity.ActualCurrent; |
||
200 | DebugOut.Analog[23] = Capacity.UsedCapacity; |
||
201 | // DebugOut.Analog[22] = FromNaviCtrl_Value.GpsZ; |
||
202 | // DebugOut.Analog[24] = MesswertNick/2; |
||
203 | // DebugOut.Analog[25] = MesswertRoll/2; |
||
204 | // DebugOut.Analog[27] = (int)FromNaviCtrl_Value.Kalman_MaxDrift; |
||
205 | // DebugOut.Analog[28] = (int)FromNaviCtrl_Value.Kalman_MaxFusion; |
||
206 | // DebugOut.Analog[29] = (int)FromNaviCtrl_Value.Kalman_K; |
||
207 | //DebugOut.Analog[28] = I2CError; |
||
208 | DebugOut.Analog[29] = FromNaviCtrl_Value.SerialDataOkay; |
||
209 | DebugOut.Analog[30] = GPS_Nick; |
||
210 | DebugOut.Analog[31] = GPS_Roll; |
||
211 | } |
||
212 | |||
213 | |||
214 | |||
1232 | hbuss | 215 | void Piep(unsigned char Anzahl, unsigned int dauer) |
1 | ingob | 216 | { |
1232 | hbuss | 217 | if(MotorenEin) return; //auf keinen Fall im Flug! |
1 | ingob | 218 | while(Anzahl--) |
219 | { |
||
1232 | hbuss | 220 | beeptime = dauer; |
221 | while(beeptime); |
||
222 | Delay_ms(dauer * 2); |
||
1 | ingob | 223 | } |
224 | } |
||
225 | |||
226 | //############################################################################ |
||
1622 | killagreg | 227 | // Messwerte beim Ermitteln der Nullage |
228 | void CalibrierMittelwert(void) |
||
229 | //############################################################################ |
||
230 | { |
||
231 | unsigned char i; |
||
232 | if(PlatinenVersion == 13) SucheGyroOffset(); |
||
233 | // ADC auschalten, damit die Werte sich nicht während der Berechnung ändern |
||
234 | ANALOG_OFF; |
||
235 | MesswertNick = AdWertNick; |
||
236 | MesswertRoll = AdWertRoll; |
||
237 | MesswertGier = AdWertGier; |
||
238 | Mittelwert_AccNick = ACC_AMPLIFY * (long)AdWertAccNick; |
||
239 | Mittelwert_AccRoll = ACC_AMPLIFY * (long)AdWertAccRoll; |
||
240 | Mittelwert_AccHoch = (long)AdWertAccHoch; |
||
241 | // ADC einschalten |
||
242 | ANALOG_ON; |
||
243 | for(i=0;i<8;i++) |
||
244 | { |
||
245 | int tmp; |
||
246 | tmp = PPM_in[EE_Parameter.Kanalbelegung[K_POTI1 + i]] + 110; |
||
247 | LIMIT_MIN_MAX(tmp, 0, 255); |
||
248 | if(Poti[i] > tmp) Poti[i]--; else if(Poti[i] < tmp) Poti[i]++; |
||
249 | } |
||
250 | Umschlag180Nick = (long) EE_Parameter.WinkelUmschlagNick * 2500L; |
||
251 | Umschlag180Roll = (long) EE_Parameter.WinkelUmschlagRoll * 2500L; |
||
252 | } |
||
253 | |||
254 | //############################################################################ |
||
1 | ingob | 255 | // Nullwerte ermitteln |
1622 | killagreg | 256 | void SetNeutral(unsigned char AccAdjustment) |
1 | ingob | 257 | //############################################################################ |
258 | { |
||
1622 | killagreg | 259 | unsigned char i; |
260 | unsigned int gier_neutral=0, nick_neutral=0, roll_neutral=0; |
||
261 | |||
1320 | hbuss | 262 | HEF4017R_ON; |
1051 | killagreg | 263 | NeutralAccX = 0; |
1 | ingob | 264 | NeutralAccY = 0; |
265 | NeutralAccZ = 0; |
||
1622 | killagreg | 266 | |
1051 | killagreg | 267 | AdNeutralNick = 0; |
268 | AdNeutralRoll = 0; |
||
1 | ingob | 269 | AdNeutralGier = 0; |
1622 | killagreg | 270 | |
395 | hbuss | 271 | Parameter_AchsKopplung1 = 0; |
1120 | hbuss | 272 | Parameter_AchsKopplung2 = 0; |
1622 | killagreg | 273 | |
1036 | hbuss | 274 | ExpandBaro = 0; |
1622 | killagreg | 275 | |
1642 | killagreg | 276 | TransmitBlConfig = 1; |
1639 | holgerb | 277 | motorread = 0; |
278 | |||
1051 | killagreg | 279 | CalibrierMittelwert(); |
395 | hbuss | 280 | Delay_ms_Mess(100); |
1622 | killagreg | 281 | |
1 | ingob | 282 | CalibrierMittelwert(); |
1622 | killagreg | 283 | |
1 | ingob | 284 | if((EE_Parameter.GlobalConfig & CFG_HOEHENREGELUNG)) // Höhenregelung aktiviert? |
1051 | killagreg | 285 | { |
1 | ingob | 286 | if((MessLuftdruck > 950) || (MessLuftdruck < 750)) SucheLuftruckOffset(); |
287 | } |
||
1166 | hbuss | 288 | #define NEUTRAL_FILTER 32 |
289 | for(i=0; i<NEUTRAL_FILTER; i++) |
||
1111 | hbuss | 290 | { |
291 | Delay_ms_Mess(10); |
||
1216 | killagreg | 292 | gier_neutral += AdWertGier; |
1166 | hbuss | 293 | nick_neutral += AdWertNick; |
294 | roll_neutral += AdWertRoll; |
||
1111 | hbuss | 295 | } |
1173 | hbuss | 296 | AdNeutralNick= (nick_neutral+NEUTRAL_FILTER/2) / (NEUTRAL_FILTER / 8); |
297 | AdNeutralRoll= (roll_neutral+NEUTRAL_FILTER/2) / (NEUTRAL_FILTER / 8); |
||
298 | AdNeutralGier= (gier_neutral+NEUTRAL_FILTER/2) / (NEUTRAL_FILTER); |
||
1622 | killagreg | 299 | |
401 | hbuss | 300 | StartNeutralRoll = AdNeutralRoll; |
301 | StartNeutralNick = AdNeutralNick; |
||
1622 | killagreg | 302 | |
303 | if(AccAdjustment) |
||
304 | { |
||
305 | NeutralAccX = abs(Mittelwert_AccNick) / (2*ACC_AMPLIFY); |
||
306 | NeutralAccY = abs(Mittelwert_AccRoll) / (2*ACC_AMPLIFY); |
||
307 | NeutralAccZ = Aktuell_az; |
||
308 | |||
309 | // Save ACC neutral settings to eeprom |
||
1639 | holgerb | 310 | SetParamWord(PID_ACC_NICK, (uint16_t)NeutralAccX); |
311 | SetParamWord(PID_ACC_ROLL, (uint16_t)NeutralAccY); |
||
1622 | killagreg | 312 | SetParamWord(PID_ACC_TOP, (uint16_t)NeutralAccZ); |
513 | hbuss | 313 | } |
1051 | killagreg | 314 | else |
513 | hbuss | 315 | { |
1622 | killagreg | 316 | // restore from eeprom |
317 | NeutralAccX = (int16_t)GetParamWord(PID_ACC_NICK); |
||
318 | NeutralAccY = (int16_t)GetParamWord(PID_ACC_ROLL); |
||
319 | NeutralAccZ = (int16_t)GetParamWord(PID_ACC_TOP); |
||
320 | // strange settings? |
||
1638 | holgerb | 321 | if(((unsigned int) NeutralAccX > 2048) || ((unsigned int) NeutralAccY > 2048) || ((unsigned int) NeutralAccZ > 1024)) |
1622 | killagreg | 322 | { |
323 | printf("\n\rACC not calibrated!\r\n"); |
||
324 | NeutralAccX = abs(Mittelwert_AccNick) / (2*ACC_AMPLIFY); |
||
325 | NeutralAccY = abs(Mittelwert_AccRoll) / (2*ACC_AMPLIFY); |
||
326 | NeutralAccZ = Aktuell_az; |
||
327 | } |
||
513 | hbuss | 328 | } |
1051 | killagreg | 329 | |
1 | ingob | 330 | MesswertNick = 0; |
331 | MesswertRoll = 0; |
||
332 | MesswertGier = 0; |
||
1111 | hbuss | 333 | Delay_ms_Mess(100); |
1174 | hbuss | 334 | Mittelwert_AccNick = ACC_AMPLIFY * (long)AdWertAccNick; |
335 | Mittelwert_AccRoll = ACC_AMPLIFY * (long)AdWertAccRoll; |
||
1173 | hbuss | 336 | IntegralNick = EE_Parameter.GyroAccFaktor * (long)Mittelwert_AccNick; |
337 | IntegralRoll = EE_Parameter.GyroAccFaktor * (long)Mittelwert_AccRoll; |
||
338 | Mess_IntegralNick2 = IntegralNick; |
||
339 | Mess_IntegralRoll2 = IntegralRoll; |
||
340 | Mess_Integral_Gier = 0; |
||
1 | ingob | 341 | StartLuftdruck = Luftdruck; |
1253 | killagreg | 342 | VarioMeter = 0; |
1 | ingob | 343 | Mess_Integral_Hoch = 0; |
344 | KompassStartwert = KompassValue; |
||
345 | GPS_Neutral(); |
||
1051 | killagreg | 346 | beeptime = 50; |
882 | hbuss | 347 | Umschlag180Nick = ((long) EE_Parameter.WinkelUmschlagNick * 2500L) + 15000L; |
348 | Umschlag180Roll = ((long) EE_Parameter.WinkelUmschlagRoll * 2500L) + 15000L; |
||
492 | hbuss | 349 | ExternHoehenValue = 0; |
693 | hbuss | 350 | ErsatzKompass = KompassValue * GIER_GRAD_FAKTOR; |
351 | GierGyroFehler = 0; |
||
723 | hbuss | 352 | SendVersionToNavi = 1; |
921 | hbuss | 353 | LED_Init(); |
1420 | killagreg | 354 | FCFlags |= FCFLAG_CALIBRATE; |
992 | hbuss | 355 | FromNaviCtrl_Value.Kalman_K = -1; |
1173 | hbuss | 356 | FromNaviCtrl_Value.Kalman_MaxDrift = 0; |
992 | hbuss | 357 | FromNaviCtrl_Value.Kalman_MaxFusion = 32; |
1391 | killagreg | 358 | |
359 | for(i=0;i<8;i++) |
||
1377 | hbuss | 360 | { |
361 | Poti[i] = PPM_in[EE_Parameter.Kanalbelegung[K_POTI1 + i]] + 110; |
||
362 | } |
||
1171 | hbuss | 363 | SenderOkay = 100; |
1320 | hbuss | 364 | if(ServoActive) |
365 | { |
||
366 | HEF4017R_ON; |
||
367 | DDRD |=0x80; // enable J7 -> Servo signal |
||
368 | } |
||
1 | ingob | 369 | } |
370 | |||
371 | //############################################################################ |
||
395 | hbuss | 372 | // Bearbeitet die Messwerte |
1 | ingob | 373 | void Mittelwert(void) |
374 | //############################################################################ |
||
1051 | killagreg | 375 | { |
1111 | hbuss | 376 | static signed long tmpl,tmpl2,tmpl3,tmpl4; |
377 | static signed int oldNick, oldRoll, d2Roll, d2Nick; |
||
1153 | hbuss | 378 | signed long winkel_nick, winkel_roll; |
1377 | hbuss | 379 | unsigned char i; |
1111 | hbuss | 380 | MesswertGier = (signed int) AdNeutralGier - AdWertGier; |
1171 | hbuss | 381 | MesswertNick = (signed int) AdWertNickFilter / 8; |
382 | MesswertRoll = (signed int) AdWertRollFilter / 8; |
||
1153 | hbuss | 383 | RohMesswertNick = MesswertNick; |
384 | RohMesswertRoll = MesswertRoll; |
||
1166 | hbuss | 385 | |
395 | hbuss | 386 | // Beschleunigungssensor ++++++++++++++++++++++++++++++++++++++++++++++++ |
1166 | hbuss | 387 | Mittelwert_AccNick = ((long)Mittelwert_AccNick * 3 + ((ACC_AMPLIFY * (long)AdWertAccNick))) / 4L; |
388 | Mittelwert_AccRoll = ((long)Mittelwert_AccRoll * 3 + ((ACC_AMPLIFY * (long)AdWertAccRoll))) / 4L; |
||
389 | Mittelwert_AccHoch = ((long)Mittelwert_AccHoch * 3 + ((long)AdWertAccHoch)) / 4L; |
||
395 | hbuss | 390 | IntegralAccNick += ACC_AMPLIFY * AdWertAccNick; |
391 | IntegralAccRoll += ACC_AMPLIFY * AdWertAccRoll; |
||
805 | hbuss | 392 | NaviAccNick += AdWertAccNick; |
393 | NaviAccRoll += AdWertAccRoll; |
||
394 | NaviCntAcc++; |
||
1153 | hbuss | 395 | IntegralAccZ += Aktuell_az - NeutralAccZ; |
396 | |||
1155 | hbuss | 397 | //++++++++++++++++++++++++++++++++++++++++++++++++ |
398 | // ADC einschalten |
||
1171 | hbuss | 399 | ANALOG_ON; |
1155 | hbuss | 400 | AdReady = 0; |
401 | //++++++++++++++++++++++++++++++++++++++++++++++++ |
||
402 | |||
1216 | killagreg | 403 | if(Mess_IntegralRoll > 93000L) winkel_roll = 93000L; |
404 | else if(Mess_IntegralRoll <-93000L) winkel_roll = -93000L; |
||
1153 | hbuss | 405 | else winkel_roll = Mess_IntegralRoll; |
406 | |||
1216 | killagreg | 407 | if(Mess_IntegralNick > 93000L) winkel_nick = 93000L; |
408 | else if(Mess_IntegralNick <-93000L) winkel_nick = -93000L; |
||
1153 | hbuss | 409 | else winkel_nick = Mess_IntegralNick; |
410 | |||
1120 | hbuss | 411 | // Gier ++++++++++++++++++++++++++++++++++++++++++++++++ |
1153 | hbuss | 412 | Mess_Integral_Gier += MesswertGier; |
413 | ErsatzKompass += MesswertGier; |
||
395 | hbuss | 414 | // Kopplungsanteil +++++++++++++++++++++++++++++++++++++ |
415 | if(!Looping_Nick && !Looping_Roll && (EE_Parameter.GlobalConfig & CFG_ACHSENKOPPLUNG_AKTIV)) |
||
416 | { |
||
1153 | hbuss | 417 | tmpl3 = (MesswertRoll * winkel_nick) / 2048L; |
1120 | hbuss | 418 | tmpl3 *= Parameter_AchsKopplung2; //65 |
1111 | hbuss | 419 | tmpl3 /= 4096L; |
1153 | hbuss | 420 | tmpl4 = (MesswertNick * winkel_roll) / 2048L; |
1216 | killagreg | 421 | tmpl4 *= Parameter_AchsKopplung2; //65 |
1111 | hbuss | 422 | tmpl4 /= 4096L; |
1153 | hbuss | 423 | KopplungsteilNickRoll = tmpl3; |
424 | KopplungsteilRollNick = tmpl4; |
||
1111 | hbuss | 425 | tmpl4 -= tmpl3; |
426 | ErsatzKompass += tmpl4; |
||
1166 | hbuss | 427 | if(!Parameter_CouplingYawCorrection) Mess_Integral_Gier -= tmpl4/2; // Gier nachhelfen |
1111 | hbuss | 428 | |
1153 | hbuss | 429 | tmpl = ((MesswertGier + tmpl4) * winkel_nick) / 2048L; |
1111 | hbuss | 430 | tmpl *= Parameter_AchsKopplung1; // 90 |
880 | hbuss | 431 | tmpl /= 4096L; |
1153 | hbuss | 432 | tmpl2 = ((MesswertGier + tmpl4) * winkel_roll) / 2048L; |
395 | hbuss | 433 | tmpl2 *= Parameter_AchsKopplung1; |
880 | hbuss | 434 | tmpl2 /= 4096L; |
1225 | hbuss | 435 | if(abs(MesswertGier) > 64) if(labs(tmpl) > 128 || labs(tmpl2) > 128) TrichterFlug = 1; |
1153 | hbuss | 436 | //MesswertGier += (Parameter_CouplingYawCorrection * tmpl4) / 256; |
395 | hbuss | 437 | } |
1166 | hbuss | 438 | else tmpl = tmpl2 = KopplungsteilNickRoll = KopplungsteilRollNick = 0; |
1111 | hbuss | 439 | |
1166 | hbuss | 440 | TrimRoll = tmpl - tmpl2 / 100L; |
441 | TrimNick = -tmpl2 + tmpl / 100L; |
||
442 | |||
1111 | hbuss | 443 | // Kompasswert begrenzen ++++++++++++++++++++++++++++++++++++++++++++++++ |
444 | if(ErsatzKompass >= (360L * GIER_GRAD_FAKTOR)) ErsatzKompass -= 360L * GIER_GRAD_FAKTOR; // 360° Umschlag |
||
445 | if(ErsatzKompass < 0) ErsatzKompass += 360L * GIER_GRAD_FAKTOR; |
||
395 | hbuss | 446 | // Roll ++++++++++++++++++++++++++++++++++++++++++++++++ |
1166 | hbuss | 447 | Mess_IntegralRoll2 += MesswertRoll + TrimRoll; |
448 | Mess_IntegralRoll += MesswertRoll + TrimRoll - LageKorrekturRoll; |
||
1051 | killagreg | 449 | if(Mess_IntegralRoll > Umschlag180Roll) |
395 | hbuss | 450 | { |
882 | hbuss | 451 | Mess_IntegralRoll = -(Umschlag180Roll - 25000L); |
395 | hbuss | 452 | Mess_IntegralRoll2 = Mess_IntegralRoll; |
1051 | killagreg | 453 | } |
395 | hbuss | 454 | if(Mess_IntegralRoll <-Umschlag180Roll) |
455 | { |
||
882 | hbuss | 456 | Mess_IntegralRoll = (Umschlag180Roll - 25000L); |
395 | hbuss | 457 | Mess_IntegralRoll2 = Mess_IntegralRoll; |
1051 | killagreg | 458 | } |
395 | hbuss | 459 | // Nick ++++++++++++++++++++++++++++++++++++++++++++++++ |
1166 | hbuss | 460 | Mess_IntegralNick2 += MesswertNick + TrimNick; |
461 | Mess_IntegralNick += MesswertNick + TrimNick - LageKorrekturNick; |
||
1051 | killagreg | 462 | if(Mess_IntegralNick > Umschlag180Nick) |
882 | hbuss | 463 | { |
464 | Mess_IntegralNick = -(Umschlag180Nick - 25000L); |
||
465 | Mess_IntegralNick2 = Mess_IntegralNick; |
||
1051 | killagreg | 466 | } |
467 | if(Mess_IntegralNick <-Umschlag180Nick) |
||
395 | hbuss | 468 | { |
882 | hbuss | 469 | Mess_IntegralNick = (Umschlag180Nick - 25000L); |
395 | hbuss | 470 | Mess_IntegralNick2 = Mess_IntegralNick; |
1051 | killagreg | 471 | } |
1111 | hbuss | 472 | |
1 | ingob | 473 | Integral_Gier = Mess_Integral_Gier; |
474 | IntegralNick = Mess_IntegralNick; |
||
475 | IntegralRoll = Mess_IntegralRoll; |
||
1051 | killagreg | 476 | IntegralNick2 = Mess_IntegralNick2; |
1 | ingob | 477 | IntegralRoll2 = Mess_IntegralRoll2; |
478 | |||
1166 | hbuss | 479 | #define D_LIMIT 128 |
480 | |||
1171 | hbuss | 481 | MesswertNick = HiResNick / 8; |
482 | MesswertRoll = HiResRoll / 8; |
||
1166 | hbuss | 483 | |
1167 | hbuss | 484 | if(AdWertNick < 15) MesswertNick = -1000; if(AdWertNick < 7) MesswertNick = -2000; |
485 | if(PlatinenVersion == 10) { if(AdWertNick > 1010) MesswertNick = +1000; if(AdWertNick > 1017) MesswertNick = +2000; } |
||
486 | else { if(AdWertNick > 2000) MesswertNick = +1000; if(AdWertNick > 2015) MesswertNick = +2000; } |
||
487 | if(AdWertRoll < 15) MesswertRoll = -1000; if(AdWertRoll < 7) MesswertRoll = -2000; |
||
488 | if(PlatinenVersion == 10) { if(AdWertRoll > 1010) MesswertRoll = +1000; if(AdWertRoll > 1017) MesswertRoll = +2000; } |
||
489 | else { if(AdWertRoll > 2000) MesswertRoll = +1000; if(AdWertRoll > 2015) MesswertRoll = +2000; } |
||
490 | |||
1216 | killagreg | 491 | if(Parameter_Gyro_D) |
1111 | hbuss | 492 | { |
1166 | hbuss | 493 | d2Nick = HiResNick - oldNick; |
494 | oldNick = (oldNick + HiResNick)/2; |
||
1111 | hbuss | 495 | if(d2Nick > D_LIMIT) d2Nick = D_LIMIT; |
496 | else if(d2Nick < -D_LIMIT) d2Nick = -D_LIMIT; |
||
1166 | hbuss | 497 | MesswertNick += (d2Nick * (signed int) Parameter_Gyro_D) / 16; |
498 | d2Roll = HiResRoll - oldRoll; |
||
499 | oldRoll = (oldRoll + HiResRoll)/2; |
||
1111 | hbuss | 500 | if(d2Roll > D_LIMIT) d2Roll = D_LIMIT; |
501 | else if(d2Roll < -D_LIMIT) d2Roll = -D_LIMIT; |
||
1166 | hbuss | 502 | MesswertRoll += (d2Roll * (signed int) Parameter_Gyro_D) / 16; |
503 | HiResNick += (d2Nick * (signed int) Parameter_Gyro_D); |
||
504 | HiResRoll += (d2Roll * (signed int) Parameter_Gyro_D); |
||
1216 | killagreg | 505 | } |
1111 | hbuss | 506 | |
1166 | hbuss | 507 | if(RohMesswertRoll > 0) TrimRoll += ((long) abs(KopplungsteilNickRoll) * Parameter_CouplingYawCorrection) / 64L; |
508 | else TrimRoll -= ((long) abs(KopplungsteilNickRoll) * Parameter_CouplingYawCorrection) / 64L; |
||
509 | if(RohMesswertNick > 0) TrimNick += ((long) abs(KopplungsteilRollNick) * Parameter_CouplingYawCorrection) / 64L; |
||
510 | else TrimNick -= ((long) abs(KopplungsteilRollNick) * Parameter_CouplingYawCorrection) / 64L; |
||
1153 | hbuss | 511 | |
512 | if(EE_Parameter.GlobalConfig & CFG_DREHRATEN_BEGRENZER && !Looping_Nick && !Looping_Roll) |
||
513 | { |
||
514 | if(RohMesswertNick > 256) MesswertNick += 1 * (RohMesswertNick - 256); |
||
515 | else if(RohMesswertNick < -256) MesswertNick += 1 * (RohMesswertNick + 256); |
||
516 | if(RohMesswertRoll > 256) MesswertRoll += 1 * (RohMesswertRoll - 256); |
||
517 | else if(RohMesswertRoll < -256) MesswertRoll += 1 * (RohMesswertRoll + 256); |
||
518 | } |
||
1377 | hbuss | 519 | for(i=0;i<8;i++) |
520 | { |
||
521 | int tmp; |
||
522 | tmp = PPM_in[EE_Parameter.Kanalbelegung[K_POTI1 + i]] + 110; |
||
523 | if(tmp > 255) tmp = 255; else if(tmp < 0) tmp = 0; |
||
1406 | hbuss | 524 | if(tmp != Poti[i]) |
525 | { |
||
526 | Poti[i] += (tmp - Poti[i]) / 8; |
||
1413 | killagreg | 527 | if(Poti[i] > tmp) Poti[i]--; |
1406 | hbuss | 528 | else Poti[i]++; |
1413 | killagreg | 529 | } |
1377 | hbuss | 530 | } |
1 | ingob | 531 | } |
532 | |||
533 | //############################################################################ |
||
534 | // Senden der Motorwerte per I2C-Bus |
||
535 | void SendMotorData(void) |
||
536 | //############################################################################ |
||
1051 | killagreg | 537 | { |
1209 | hbuss | 538 | unsigned char i; |
921 | hbuss | 539 | if(!MotorenEin) |
1 | ingob | 540 | { |
1420 | killagreg | 541 | FCFlags &= ~(FCFLAG_MOTOR_RUN | FCFLAG_FLY); |
1216 | killagreg | 542 | for(i=0;i<MAX_MOTORS;i++) |
543 | { |
||
544 | if(!PC_MotortestActive) MotorTest[i] = 0; |
||
1638 | holgerb | 545 | Motor[i].SetPoint = MotorTest[i]; |
546 | Motor[i].SetPointLowerBits = 0; |
||
547 | /* |
||
548 | Motor[i].SetPoint = MotorTest[i] / 4; |
||
549 | Motor[i].SetPointLowerBits = MotorTest[i] % 4; |
||
550 | */ |
||
1216 | killagreg | 551 | } |
1212 | hbuss | 552 | if(PC_MotortestActive) PC_MotortestActive--; |
1216 | killagreg | 553 | } |
1420 | killagreg | 554 | else FCFlags |= FCFLAG_MOTOR_RUN; |
1111 | hbuss | 555 | |
1479 | killagreg | 556 | DebugOut.Analog[12] = Motor[0].SetPoint; |
557 | DebugOut.Analog[13] = Motor[1].SetPoint; |
||
1521 | killagreg | 558 | DebugOut.Analog[14] = Motor[2].SetPoint; |
559 | DebugOut.Analog[15] = Motor[3].SetPoint; |
||
1 | ingob | 560 | |
561 | //Start I2C Interrupt Mode |
||
562 | twi_state = 0; |
||
563 | motor = 0; |
||
1639 | holgerb | 564 | I2C_Start(); |
1 | ingob | 565 | } |
566 | |||
567 | |||
568 | |||
569 | //############################################################################ |
||
570 | // Trägt ggf. das Poti als Parameter ein |
||
1051 | killagreg | 571 | void ParameterZuordnung(void) |
1 | ingob | 572 | //############################################################################ |
573 | { |
||
1391 | killagreg | 574 | #define CHK_POTI(b,a) {if(a < 248) b = a; else b = Poti[255 - a];} |
575 | #define CHK_POTI_MM(b,a,min,max) {CHK_POTI(b,a); LIMIT_MIN_MAX(b, min, max);} |
||
576 | |||
921 | hbuss | 577 | CHK_POTI_MM(Parameter_Luftdruck_D,EE_Parameter.Luftdruck_D,0,100); |
578 | CHK_POTI_MM(Parameter_Hoehe_P,EE_Parameter.Hoehe_P,0,100); |
||
579 | CHK_POTI_MM(Parameter_Gyro_P,EE_Parameter.Gyro_P,10,255); |
||
580 | CHK_POTI_MM(Parameter_J16Timing,EE_Parameter.J16Timing,1,255); |
||
581 | CHK_POTI_MM(Parameter_J17Timing,EE_Parameter.J17Timing,1,255); |
||
1403 | hbuss | 582 | CHK_POTI(Parameter_Servo3,EE_Parameter.Servo3); |
583 | CHK_POTI(Parameter_Servo4,EE_Parameter.Servo4); |
||
584 | CHK_POTI(Parameter_Servo5,EE_Parameter.Servo5); |
||
1377 | hbuss | 585 | CHK_POTI(Parameter_MaxHoehe,EE_Parameter.MaxHoehe); |
1403 | hbuss | 586 | CHK_POTI(Parameter_MaxHoehe,EE_Parameter.MaxHoehe); |
1377 | hbuss | 587 | CHK_POTI(Parameter_Hoehe_ACC_Wirkung,EE_Parameter.Hoehe_ACC_Wirkung); |
588 | CHK_POTI(Parameter_Hoehe_GPS_Z,EE_Parameter.Hoehe_GPS_Z); |
||
589 | CHK_POTI(Parameter_KompassWirkung,EE_Parameter.KompassWirkung); |
||
590 | CHK_POTI(Parameter_Gyro_I,EE_Parameter.Gyro_I); |
||
591 | CHK_POTI(Parameter_Gyro_D,EE_Parameter.Gyro_D); |
||
592 | CHK_POTI(Parameter_Gyro_Gier_P,EE_Parameter.Gyro_Gier_P); |
||
593 | CHK_POTI(Parameter_Gyro_Gier_I,EE_Parameter.Gyro_Gier_I); |
||
594 | CHK_POTI(Parameter_I_Faktor,EE_Parameter.I_Faktor); |
||
595 | CHK_POTI(Parameter_UserParam1,EE_Parameter.UserParam1); |
||
596 | CHK_POTI(Parameter_UserParam2,EE_Parameter.UserParam2); |
||
597 | CHK_POTI(Parameter_UserParam3,EE_Parameter.UserParam3); |
||
598 | CHK_POTI(Parameter_UserParam4,EE_Parameter.UserParam4); |
||
599 | CHK_POTI(Parameter_UserParam5,EE_Parameter.UserParam5); |
||
600 | CHK_POTI(Parameter_UserParam6,EE_Parameter.UserParam6); |
||
601 | CHK_POTI(Parameter_UserParam7,EE_Parameter.UserParam7); |
||
602 | CHK_POTI(Parameter_UserParam8,EE_Parameter.UserParam8); |
||
603 | CHK_POTI(Parameter_ServoNickControl,EE_Parameter.ServoNickControl); |
||
604 | CHK_POTI(Parameter_ServoRollControl,EE_Parameter.ServoRollControl); |
||
605 | CHK_POTI(Parameter_LoopGasLimit,EE_Parameter.LoopGasLimit); |
||
606 | CHK_POTI(Parameter_AchsKopplung1, EE_Parameter.AchsKopplung1); |
||
607 | CHK_POTI(Parameter_AchsKopplung2, EE_Parameter.AchsKopplung2); |
||
608 | CHK_POTI(Parameter_CouplingYawCorrection,EE_Parameter.CouplingYawCorrection); |
||
609 | // CHK_POTI(Parameter_AchsGegenKopplung1,EE_Parameter.AchsGegenKopplung1,0,255); |
||
610 | CHK_POTI(Parameter_DynamicStability,EE_Parameter.DynamicStability); |
||
611 | CHK_POTI(Parameter_ExternalControl,EE_Parameter.ExternalControl); |
||
1153 | hbuss | 612 | Ki = 10300 / (Parameter_I_Faktor + 1); |
1 | ingob | 613 | MAX_GAS = EE_Parameter.Gas_Max; |
614 | MIN_GAS = EE_Parameter.Gas_Min; |
||
615 | } |
||
616 | |||
617 | //############################################################################ |
||
618 | // |
||
619 | void MotorRegler(void) |
||
620 | //############################################################################ |
||
621 | { |
||
1330 | killagreg | 622 | int pd_ergebnis_nick,pd_ergebnis_roll,tmp_int, tmp_int2; |
1 | ingob | 623 | int GierMischanteil,GasMischanteil; |
624 | static long SummeNick=0,SummeRoll=0; |
||
625 | static long sollGier = 0,tmp_long,tmp_long2; |
||
395 | hbuss | 626 | static long IntegralFehlerNick = 0; |
627 | static long IntegralFehlerRoll = 0; |
||
1 | ingob | 628 | static unsigned int RcLostTimer; |
629 | static unsigned char delay_neutral = 0; |
||
630 | static unsigned char delay_einschalten = 0,delay_ausschalten = 0; |
||
1622 | killagreg | 631 | static unsigned char calibration_done = 0; |
1 | ingob | 632 | static char NeueKompassRichtungMerken = 0; |
395 | hbuss | 633 | static long ausgleichNick, ausgleichRoll; |
1153 | hbuss | 634 | int IntegralNickMalFaktor,IntegralRollMalFaktor; |
1209 | hbuss | 635 | unsigned char i; |
1051 | killagreg | 636 | Mittelwert(); |
1 | ingob | 637 | GRN_ON; |
1051 | killagreg | 638 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
1 | ingob | 639 | // Gaswert ermitteln |
1051 | killagreg | 640 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
641 | GasMischanteil = StickGas; |
||
831 | hbuss | 642 | if(GasMischanteil < MIN_GAS + 10) GasMischanteil = MIN_GAS + 10; |
1330 | killagreg | 643 | |
1051 | killagreg | 644 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
693 | hbuss | 645 | // Empfang schlecht |
1051 | killagreg | 646 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
1 | ingob | 647 | if(SenderOkay < 100) |
648 | { |
||
1051 | killagreg | 649 | if(RcLostTimer) RcLostTimer--; |
650 | else |
||
1 | ingob | 651 | { |
652 | MotorenEin = 0; |
||
1420 | killagreg | 653 | FCFlags &= ~FCFLAG_NOTLANDUNG; |
1051 | killagreg | 654 | } |
1 | ingob | 655 | ROT_ON; |
693 | hbuss | 656 | if(modell_fliegt > 1000) // wahrscheinlich in der Luft --> langsam absenken |
1 | ingob | 657 | { |
658 | GasMischanteil = EE_Parameter.NotGas; |
||
1420 | killagreg | 659 | FCFlags |= FCFLAG_NOTLANDUNG; |
744 | hbuss | 660 | PPM_diff[EE_Parameter.Kanalbelegung[K_NICK]] = 0; |
1051 | killagreg | 661 | PPM_diff[EE_Parameter.Kanalbelegung[K_ROLL]] = 0; |
1 | ingob | 662 | PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] = 0; |
663 | PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] = 0; |
||
664 | PPM_in[EE_Parameter.Kanalbelegung[K_GIER]] = 0; |
||
173 | holgerb | 665 | } |
1 | ingob | 666 | else MotorenEin = 0; |
667 | } |
||
1051 | killagreg | 668 | else |
669 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
1 | ingob | 670 | // Emfang gut |
1051 | killagreg | 671 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
1 | ingob | 672 | if(SenderOkay > 140) |
673 | { |
||
1420 | killagreg | 674 | FCFlags &= ~FCFLAG_NOTLANDUNG; |
1 | ingob | 675 | RcLostTimer = EE_Parameter.NotGasZeit * 50; |
921 | hbuss | 676 | if(GasMischanteil > 40 && MotorenEin) |
1 | ingob | 677 | { |
678 | if(modell_fliegt < 0xffff) modell_fliegt++; |
||
679 | } |
||
871 | hbuss | 680 | if((modell_fliegt < 256)) |
1 | ingob | 681 | { |
682 | SummeNick = 0; |
||
683 | SummeRoll = 0; |
||
1051 | killagreg | 684 | if(modell_fliegt == 250) |
918 | hbuss | 685 | { |
1051 | killagreg | 686 | NeueKompassRichtungMerken = 1; |
918 | hbuss | 687 | sollGier = 0; |
1051 | killagreg | 688 | Mess_Integral_Gier = 0; |
927 | hbuss | 689 | // Mess_Integral_Gier2 = 0; |
1051 | killagreg | 690 | } |
1420 | killagreg | 691 | } else FCFlags |= FCFLAG_FLY; |
1051 | killagreg | 692 | |
595 | hbuss | 693 | if((PPM_in[EE_Parameter.Kanalbelegung[K_GAS]] > 80) && MotorenEin == 0) |
1 | ingob | 694 | { |
1051 | killagreg | 695 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
1 | ingob | 696 | // auf Nullwerte kalibrieren |
1051 | killagreg | 697 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
1 | ingob | 698 | if(PPM_in[EE_Parameter.Kanalbelegung[K_GIER]] > 75) // Neutralwerte |
699 | { |
||
700 | if(++delay_neutral > 200) // nicht sofort |
||
701 | { |
||
702 | GRN_OFF; |
||
703 | MotorenEin = 0; |
||
704 | delay_neutral = 0; |
||
705 | modell_fliegt = 0; |
||
706 | if(PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] > 70 || abs(PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]]) > 70) |
||
707 | { |
||
304 | ingob | 708 | unsigned char setting=1; |
1 | ingob | 709 | if(PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] > 70 && PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] < 70) setting = 1; |
710 | if(PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] > 70 && PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] > 70) setting = 2; |
||
711 | if(PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] < 70 && PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] > 70) setting = 3; |
||
712 | if(PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] <-70 && PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] > 70) setting = 4; |
||
713 | if(PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] <-70 && PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] < 70) setting = 5; |
||
1622 | killagreg | 714 | SetActiveParamSet(setting); // aktiven Datensatz merken |
1 | ingob | 715 | } |
820 | hbuss | 716 | // else |
1051 | killagreg | 717 | if(abs(PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]]) < 30 && PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] < -70) |
718 | { |
||
819 | hbuss | 719 | WinkelOut.CalcState = 1; |
720 | beeptime = 1000; |
||
721 | } |
||
722 | else |
||
1 | ingob | 723 | { |
1622 | killagreg | 724 | ParamSet_ReadFromEEProm(GetActiveParamSet()); |
1413 | killagreg | 725 | LipoDetection(0); |
1626 | killagreg | 726 | LIBFC_ReceiverInit(EE_Parameter.Receiver); |
819 | hbuss | 727 | if((EE_Parameter.GlobalConfig & CFG_HOEHENREGELUNG)) // Höhenregelung aktiviert? |
728 | { |
||
1 | ingob | 729 | if((MessLuftdruck > 950) || (MessLuftdruck < 750)) SucheLuftruckOffset(); |
1051 | killagreg | 730 | } |
1330 | killagreg | 731 | ServoActive = 0; |
1622 | killagreg | 732 | SetNeutral(0); |
733 | calibration_done = 1; |
||
1232 | hbuss | 734 | ServoActive = 1; |
735 | DDRD |=0x80; // enable J7 -> Servo signal |
||
1622 | killagreg | 736 | Piep(GetActiveParamSet(),120); |
819 | hbuss | 737 | } |
1051 | killagreg | 738 | } |
1 | ingob | 739 | } |
1051 | killagreg | 740 | else |
513 | hbuss | 741 | if(PPM_in[EE_Parameter.Kanalbelegung[K_GIER]] < -75) // ACC Neutralwerte speichern |
742 | { |
||
743 | if(++delay_neutral > 200) // nicht sofort |
||
744 | { |
||
745 | GRN_OFF; |
||
746 | MotorenEin = 0; |
||
747 | delay_neutral = 0; |
||
748 | modell_fliegt = 0; |
||
1622 | killagreg | 749 | SetNeutral(1); |
750 | calibration_done = 1; |
||
751 | Piep(GetActiveParamSet(),120); |
||
1051 | killagreg | 752 | } |
513 | hbuss | 753 | } |
1 | ingob | 754 | else delay_neutral = 0; |
755 | } |
||
1051 | killagreg | 756 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
1 | ingob | 757 | // Gas ist unten |
1051 | killagreg | 758 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
595 | hbuss | 759 | if(PPM_in[EE_Parameter.Kanalbelegung[K_GAS]] < 35-120) |
1 | ingob | 760 | { |
1521 | killagreg | 761 | // Motoren Starten |
762 | if(!MotorenEin) |
||
763 | { |
||
764 | if(PPM_in[EE_Parameter.Kanalbelegung[K_GIER]] < -75) |
||
765 | { |
||
1051 | killagreg | 766 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
1 | ingob | 767 | // Einschalten |
1051 | killagreg | 768 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
1521 | killagreg | 769 | if(++delay_einschalten > 200) |
770 | { |
||
771 | delay_einschalten = 0; |
||
1622 | killagreg | 772 | if(calibration_done) |
773 | { |
||
774 | modell_fliegt = 1; |
||
775 | MotorenEin = 1; |
||
776 | sollGier = 0; |
||
777 | Mess_Integral_Gier = 0; |
||
778 | Mess_Integral_Gier2 = 0; |
||
779 | Mess_IntegralNick = EE_Parameter.GyroAccFaktor * (long)Mittelwert_AccNick; |
||
780 | Mess_IntegralRoll = EE_Parameter.GyroAccFaktor * (long)Mittelwert_AccRoll; |
||
781 | Mess_IntegralNick2 = IntegralNick; |
||
782 | Mess_IntegralRoll2 = IntegralRoll; |
||
783 | SummeNick = 0; |
||
784 | SummeRoll = 0; |
||
785 | FCFlags |= FCFLAG_START; |
||
786 | } |
||
787 | else |
||
788 | { |
||
789 | beeptime = 1500; // indicate missing calibration |
||
790 | } |
||
1521 | killagreg | 791 | } |
792 | } |
||
793 | else delay_einschalten = 0; |
||
794 | } |
||
1051 | killagreg | 795 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
1 | ingob | 796 | // Auschalten |
1051 | killagreg | 797 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
1521 | killagreg | 798 | else // only if motors are running |
799 | { |
||
800 | if(PPM_in[EE_Parameter.Kanalbelegung[K_GIER]] > 75) |
||
801 | { |
||
802 | if(++delay_ausschalten > 200) // nicht sofort |
||
803 | { |
||
804 | MotorenEin = 0; |
||
805 | delay_ausschalten = 0; |
||
806 | modell_fliegt = 0; |
||
807 | } |
||
808 | } |
||
809 | else delay_ausschalten = 0; |
||
810 | } |
||
1 | ingob | 811 | } |
812 | } |
||
1051 | killagreg | 813 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
1 | ingob | 814 | // neue Werte von der Funke |
1051 | killagreg | 815 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
1216 | killagreg | 816 | |
1420 | killagreg | 817 | if(!NewPpmData-- || (FCFlags & FCFLAG_NOTLANDUNG)) |
1 | ingob | 818 | { |
604 | hbuss | 819 | static int stick_nick,stick_roll; |
1 | ingob | 820 | ParameterZuordnung(); |
1051 | killagreg | 821 | stick_nick = (stick_nick * 3 + PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] * EE_Parameter.Stick_P) / 4; |
723 | hbuss | 822 | stick_nick += PPM_diff[EE_Parameter.Kanalbelegung[K_NICK]] * EE_Parameter.Stick_D; |
805 | hbuss | 823 | StickNick = stick_nick - (GPS_Nick + GPS_Nick2); |
604 | hbuss | 824 | |
723 | hbuss | 825 | stick_roll = (stick_roll * 3 + PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] * EE_Parameter.Stick_P) / 4; |
826 | stick_roll += PPM_diff[EE_Parameter.Kanalbelegung[K_ROLL]] * EE_Parameter.Stick_D; |
||
805 | hbuss | 827 | StickRoll = stick_roll - (GPS_Roll + GPS_Roll2); |
723 | hbuss | 828 | |
1 | ingob | 829 | StickGier = -PPM_in[EE_Parameter.Kanalbelegung[K_GIER]]; |
1120 | hbuss | 830 | if(StickGier > 2) StickGier -= 2; else |
831 | if(StickGier < -2) StickGier += 2; else StickGier = 0; |
||
832 | |||
1350 | hbuss | 833 | StickGas = PPM_in[EE_Parameter.Kanalbelegung[K_GAS]] + 120; |
1330 | killagreg | 834 | |
1153 | hbuss | 835 | GyroFaktor = (Parameter_Gyro_P + 10.0); |
836 | IntegralFaktor = Parameter_Gyro_I; |
||
1322 | hbuss | 837 | GyroFaktorGier = (Parameter_Gyro_Gier_P + 10.0); |
838 | IntegralFaktorGier = Parameter_Gyro_Gier_I; |
||
1 | ingob | 839 | |
595 | hbuss | 840 | //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
841 | //+ Analoge Steuerung per Seriell |
||
842 | //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
921 | hbuss | 843 | if(ExternControl.Config & 0x01 && Parameter_ExternalControl > 128) |
595 | hbuss | 844 | { |
845 | StickNick += (int) ExternControl.Nick * (int) EE_Parameter.Stick_P; |
||
846 | StickRoll += (int) ExternControl.Roll * (int) EE_Parameter.Stick_P; |
||
847 | StickGier += ExternControl.Gier; |
||
848 | ExternHoehenValue = (int) ExternControl.Hight * (int)EE_Parameter.Hoehe_Verstaerkung; |
||
849 | if(ExternControl.Gas < StickGas) StickGas = ExternControl.Gas; |
||
850 | } |
||
855 | hbuss | 851 | if(StickGas < 0) StickGas = 0; |
1330 | killagreg | 852 | |
1 | ingob | 853 | if(EE_Parameter.GlobalConfig & CFG_HEADING_HOLD) IntegralFaktor = 0; |
1330 | killagreg | 854 | //if(GyroFaktor < 0) GyroFaktor = 0; |
855 | //if(IntegralFaktor < 0) IntegralFaktor = 0; |
||
723 | hbuss | 856 | |
1051 | killagreg | 857 | if(abs(StickNick/STICK_GAIN) > MaxStickNick) |
928 | hbuss | 858 | { |
1051 | killagreg | 859 | MaxStickNick = abs(StickNick)/STICK_GAIN; |
928 | hbuss | 860 | if(MaxStickNick > 100) MaxStickNick = 100; |
1051 | killagreg | 861 | } |
928 | hbuss | 862 | else MaxStickNick--; |
1051 | killagreg | 863 | if(abs(StickRoll/STICK_GAIN) > MaxStickRoll) |
928 | hbuss | 864 | { |
1051 | killagreg | 865 | MaxStickRoll = abs(StickRoll)/STICK_GAIN; |
928 | hbuss | 866 | if(MaxStickRoll > 100) MaxStickRoll = 100; |
1051 | killagreg | 867 | } |
928 | hbuss | 868 | else MaxStickRoll--; |
1420 | killagreg | 869 | if(FCFlags & FCFLAG_NOTLANDUNG) {MaxStickNick = 0; MaxStickRoll = 0;} |
723 | hbuss | 870 | |
1051 | killagreg | 871 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
173 | holgerb | 872 | // Looping? |
1051 | killagreg | 873 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
993 | hbuss | 874 | if((PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] > EE_Parameter.LoopThreshold) && EE_Parameter.BitConfig & CFG_LOOP_LINKS) Looping_Links = 1; |
1051 | killagreg | 875 | else |
876 | { |
||
395 | hbuss | 877 | { |
1051 | killagreg | 878 | if((PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] < (EE_Parameter.LoopThreshold - EE_Parameter.LoopHysterese))) Looping_Links = 0; |
879 | } |
||
880 | } |
||
993 | hbuss | 881 | if((PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] < -EE_Parameter.LoopThreshold) && EE_Parameter.BitConfig & CFG_LOOP_RECHTS) Looping_Rechts = 1; |
1051 | killagreg | 882 | else |
395 | hbuss | 883 | { |
884 | if(Looping_Rechts) // Hysterese |
||
885 | { |
||
886 | if(PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] > -(EE_Parameter.LoopThreshold - EE_Parameter.LoopHysterese)) Looping_Rechts = 0; |
||
887 | } |
||
1051 | killagreg | 888 | } |
173 | holgerb | 889 | |
993 | hbuss | 890 | if((PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] > EE_Parameter.LoopThreshold) && EE_Parameter.BitConfig & CFG_LOOP_OBEN) Looping_Oben = 1; |
1051 | killagreg | 891 | else |
892 | { |
||
395 | hbuss | 893 | if(Looping_Oben) // Hysterese |
894 | { |
||
1051 | killagreg | 895 | if((PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] < (EE_Parameter.LoopThreshold - EE_Parameter.LoopHysterese))) Looping_Oben = 0; |
896 | } |
||
897 | } |
||
993 | hbuss | 898 | if((PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] < -EE_Parameter.LoopThreshold) && EE_Parameter.BitConfig & CFG_LOOP_UNTEN) Looping_Unten = 1; |
1051 | killagreg | 899 | else |
395 | hbuss | 900 | { |
901 | if(Looping_Unten) // Hysterese |
||
902 | { |
||
903 | if(PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] > -(EE_Parameter.LoopThreshold - EE_Parameter.LoopHysterese)) Looping_Unten = 0; |
||
904 | } |
||
1051 | killagreg | 905 | } |
395 | hbuss | 906 | |
907 | if(Looping_Links || Looping_Rechts) Looping_Roll = 1; else Looping_Roll = 0; |
||
1153 | hbuss | 908 | if(Looping_Oben || Looping_Unten) { Looping_Nick = 1; Looping_Roll = 0; Looping_Links = 0; Looping_Rechts = 0;} else Looping_Nick = 0; |
395 | hbuss | 909 | } // Ende neue Funken-Werte |
910 | |||
911 | if(Looping_Roll || Looping_Nick) |
||
912 | { |
||
173 | holgerb | 913 | if(GasMischanteil > EE_Parameter.LoopGasLimit) GasMischanteil = EE_Parameter.LoopGasLimit; |
1153 | hbuss | 914 | TrichterFlug = 1; |
173 | holgerb | 915 | } |
916 | |||
1051 | killagreg | 917 | |
918 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
919 | // Bei Empfangsausfall im Flug |
||
920 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
1420 | killagreg | 921 | if(FCFlags & FCFLAG_NOTLANDUNG) |
1 | ingob | 922 | { |
923 | StickGier = 0; |
||
924 | StickNick = 0; |
||
925 | StickRoll = 0; |
||
1211 | hbuss | 926 | GyroFaktor = 90; |
927 | IntegralFaktor = 120; |
||
928 | GyroFaktorGier = 90; |
||
929 | IntegralFaktorGier = 120; |
||
173 | holgerb | 930 | Looping_Roll = 0; |
931 | Looping_Nick = 0; |
||
1051 | killagreg | 932 | } |
395 | hbuss | 933 | |
934 | |||
1051 | killagreg | 935 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
1 | ingob | 936 | // Integrale auf ACC-Signal abgleichen |
1051 | killagreg | 937 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
395 | hbuss | 938 | #define ABGLEICH_ANZAHL 256L |
939 | |||
940 | MittelIntegralNick += IntegralNick; // Für die Mittelwertbildung aufsummieren |
||
941 | MittelIntegralRoll += IntegralRoll; |
||
942 | MittelIntegralNick2 += IntegralNick2; |
||
943 | MittelIntegralRoll2 += IntegralRoll2; |
||
944 | |||
945 | if(Looping_Nick || Looping_Roll) |
||
946 | { |
||
947 | IntegralAccNick = 0; |
||
948 | IntegralAccRoll = 0; |
||
949 | MittelIntegralNick = 0; |
||
950 | MittelIntegralRoll = 0; |
||
951 | MittelIntegralNick2 = 0; |
||
952 | MittelIntegralRoll2 = 0; |
||
953 | Mess_IntegralNick2 = Mess_IntegralNick; |
||
954 | Mess_IntegralRoll2 = Mess_IntegralRoll; |
||
955 | ZaehlMessungen = 0; |
||
498 | hbuss | 956 | LageKorrekturNick = 0; |
957 | LageKorrekturRoll = 0; |
||
395 | hbuss | 958 | } |
959 | |||
1051 | killagreg | 960 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
1224 | hbuss | 961 | if(!Looping_Nick && !Looping_Roll && (Aktuell_az > 512 || MotorenEin)) |
469 | hbuss | 962 | { |
963 | long tmp_long, tmp_long2; |
||
1171 | hbuss | 964 | if(FromNaviCtrl_Value.Kalman_K != -1 /*&& !TrichterFlug*/) |
992 | hbuss | 965 | { |
966 | tmp_long = (long)(IntegralNick / EE_Parameter.GyroAccFaktor - (long)Mittelwert_AccNick); |
||
1051 | killagreg | 967 | tmp_long2 = (long)(IntegralRoll / EE_Parameter.GyroAccFaktor - (long)Mittelwert_AccRoll); |
968 | tmp_long = (tmp_long * FromNaviCtrl_Value.Kalman_K) / (32 * 16); |
||
969 | tmp_long2 = (tmp_long2 * FromNaviCtrl_Value.Kalman_K) / (32 * 16); |
||
992 | hbuss | 970 | if((MaxStickNick > 64) || (MaxStickRoll > 64)) |
971 | { |
||
972 | tmp_long /= 2; |
||
973 | tmp_long2 /= 2; |
||
974 | } |
||
975 | if(abs(PPM_in[EE_Parameter.Kanalbelegung[K_GIER]]) > 25) |
||
976 | { |
||
977 | tmp_long /= 3; |
||
978 | tmp_long2 /= 3; |
||
979 | } |
||
980 | if(tmp_long > (long) FromNaviCtrl_Value.Kalman_MaxFusion) tmp_long = (long) FromNaviCtrl_Value.Kalman_MaxFusion; |
||
981 | if(tmp_long < (long)-FromNaviCtrl_Value.Kalman_MaxFusion) tmp_long = (long)-FromNaviCtrl_Value.Kalman_MaxFusion; |
||
982 | if(tmp_long2 > (long) FromNaviCtrl_Value.Kalman_MaxFusion) tmp_long2 = (long) FromNaviCtrl_Value.Kalman_MaxFusion; |
||
983 | if(tmp_long2 < (long)-FromNaviCtrl_Value.Kalman_MaxFusion) tmp_long2 = (long)-FromNaviCtrl_Value.Kalman_MaxFusion; |
||
984 | } |
||
1051 | killagreg | 985 | else |
992 | hbuss | 986 | { |
987 | tmp_long = (long)(IntegralNick / EE_Parameter.GyroAccFaktor - (long)Mittelwert_AccNick); |
||
1051 | killagreg | 988 | tmp_long2 = (long)(IntegralRoll / EE_Parameter.GyroAccFaktor - (long)Mittelwert_AccRoll); |
992 | hbuss | 989 | tmp_long /= 16; |
990 | tmp_long2 /= 16; |
||
991 | if((MaxStickNick > 64) || (MaxStickRoll > 64)) |
||
992 | { |
||
993 | tmp_long /= 3; |
||
994 | tmp_long2 /= 3; |
||
1216 | killagreg | 995 | } |
996 | if(abs(PPM_in[EE_Parameter.Kanalbelegung[K_GIER]]) > 25) |
||
992 | hbuss | 997 | { |
998 | tmp_long /= 3; |
||
999 | tmp_long2 /= 3; |
||
1000 | } |
||
1155 | hbuss | 1001 | |
1002 | #define AUSGLEICH 32 |
||
992 | hbuss | 1003 | if(tmp_long > AUSGLEICH) tmp_long = AUSGLEICH; |
1004 | if(tmp_long < -AUSGLEICH) tmp_long =-AUSGLEICH; |
||
1005 | if(tmp_long2 > AUSGLEICH) tmp_long2 = AUSGLEICH; |
||
1006 | if(tmp_long2 <-AUSGLEICH) tmp_long2 =-AUSGLEICH; |
||
1007 | } |
||
1166 | hbuss | 1008 | |
1009 | //if(Poti2 > 20) { tmp_long = 0; tmp_long2 = 0;} |
||
1111 | hbuss | 1010 | Mess_IntegralNick -= tmp_long; |
1011 | Mess_IntegralRoll -= tmp_long2; |
||
469 | hbuss | 1012 | } |
1051 | killagreg | 1013 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
395 | hbuss | 1014 | if(ZaehlMessungen >= ABGLEICH_ANZAHL) |
1015 | { |
||
1016 | static int cnt = 0; |
||
1017 | static char last_n_p,last_n_n,last_r_p,last_r_n; |
||
1018 | static long MittelIntegralNick_Alt,MittelIntegralRoll_Alt; |
||
1173 | hbuss | 1019 | if(!Looping_Nick && !Looping_Roll && !TrichterFlug && EE_Parameter.Driftkomp) |
173 | holgerb | 1020 | { |
395 | hbuss | 1021 | MittelIntegralNick /= ABGLEICH_ANZAHL; |
1022 | MittelIntegralRoll /= ABGLEICH_ANZAHL; |
||
1023 | IntegralAccNick = (EE_Parameter.GyroAccFaktor * IntegralAccNick) / ABGLEICH_ANZAHL; |
||
1024 | IntegralAccRoll = (EE_Parameter.GyroAccFaktor * IntegralAccRoll) / ABGLEICH_ANZAHL; |
||
1025 | IntegralAccZ = IntegralAccZ / ABGLEICH_ANZAHL; |
||
492 | hbuss | 1026 | #define MAX_I 0//(Poti2/10) |
395 | hbuss | 1027 | // Nick ++++++++++++++++++++++++++++++++++++++++++++++++ |
1028 | IntegralFehlerNick = (long)(MittelIntegralNick - (long)IntegralAccNick); |
||
1029 | ausgleichNick = IntegralFehlerNick / EE_Parameter.GyroAccAbgleich; |
||
1051 | killagreg | 1030 | // Roll ++++++++++++++++++++++++++++++++++++++++++++++++ |
1031 | IntegralFehlerRoll = (long)(MittelIntegralRoll - (long)IntegralAccRoll); |
||
395 | hbuss | 1032 | ausgleichRoll = IntegralFehlerRoll / EE_Parameter.GyroAccAbgleich; |
614 | hbuss | 1033 | |
1034 | LageKorrekturNick = ausgleichNick / ABGLEICH_ANZAHL; |
||
498 | hbuss | 1035 | LageKorrekturRoll = ausgleichRoll / ABGLEICH_ANZAHL; |
395 | hbuss | 1036 | |
992 | hbuss | 1037 | if(((MaxStickNick > 64) || (MaxStickRoll > 64) || (abs(PPM_in[EE_Parameter.Kanalbelegung[K_GIER]]) > 25)) && (FromNaviCtrl_Value.Kalman_K == -1)) |
614 | hbuss | 1038 | { |
1039 | LageKorrekturNick /= 2; |
||
720 | ingob | 1040 | LageKorrekturRoll /= 2; |
614 | hbuss | 1041 | } |
498 | hbuss | 1042 | |
1051 | killagreg | 1043 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
395 | hbuss | 1044 | // Gyro-Drift ermitteln |
1051 | killagreg | 1045 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
395 | hbuss | 1046 | MittelIntegralNick2 /= ABGLEICH_ANZAHL; |
1047 | MittelIntegralRoll2 /= ABGLEICH_ANZAHL; |
||
1051 | killagreg | 1048 | tmp_long = IntegralNick2 - IntegralNick; |
1049 | tmp_long2 = IntegralRoll2 - IntegralRoll; |
||
395 | hbuss | 1050 | //DebugOut.Analog[25] = MittelIntegralRoll2 / 26; |
1051 | |||
1052 | IntegralFehlerNick = tmp_long; |
||
1053 | IntegralFehlerRoll = tmp_long2; |
||
1054 | Mess_IntegralNick2 -= IntegralFehlerNick; |
||
1055 | Mess_IntegralRoll2 -= IntegralFehlerRoll; |
||
1056 | |||
1111 | hbuss | 1057 | if(EE_Parameter.Driftkomp) |
1058 | { |
||
1622 | killagreg | 1059 | if(GierGyroFehler > ABGLEICH_ANZAHL/2) { AdNeutralGier++; } |
1060 | if(GierGyroFehler <-ABGLEICH_ANZAHL/2) { AdNeutralGier--; } |
||
1111 | hbuss | 1061 | } |
693 | hbuss | 1062 | GierGyroFehler = 0; |
720 | ingob | 1063 | |
1064 | |||
1243 | killagreg | 1065 | #define FEHLER_LIMIT (ABGLEICH_ANZAHL / 2) |
1066 | #define FEHLER_LIMIT1 (ABGLEICH_ANZAHL * 2) //4 |
||
1225 | hbuss | 1067 | #define FEHLER_LIMIT2 (ABGLEICH_ANZAHL * 16) //16 |
492 | hbuss | 1068 | #define BEWEGUNGS_LIMIT 20000 |
395 | hbuss | 1069 | // Nick +++++++++++++++++++++++++++++++++++++++++++++++++ |
1070 | cnt = 1;// + labs(IntegralFehlerNick) / 4096; |
||
1225 | hbuss | 1071 | if(labs(IntegralFehlerNick) > FEHLER_LIMIT1) cnt = 4; |
1173 | hbuss | 1072 | if(labs(MittelIntegralNick_Alt - MittelIntegralNick) < BEWEGUNGS_LIMIT || (FromNaviCtrl_Value.Kalman_MaxDrift > 3*8)) |
492 | hbuss | 1073 | { |
1051 | killagreg | 1074 | if(IntegralFehlerNick > FEHLER_LIMIT2) |
395 | hbuss | 1075 | { |
1051 | killagreg | 1076 | if(last_n_p) |
395 | hbuss | 1077 | { |
1173 | hbuss | 1078 | cnt += labs(IntegralFehlerNick) / (FEHLER_LIMIT2 / 8); |
492 | hbuss | 1079 | ausgleichNick = IntegralFehlerNick / 8; |
401 | hbuss | 1080 | if(ausgleichNick > 5000) ausgleichNick = 5000; |
498 | hbuss | 1081 | LageKorrekturNick += ausgleichNick / ABGLEICH_ANZAHL; |
1051 | killagreg | 1082 | } |
395 | hbuss | 1083 | else last_n_p = 1; |
1084 | } else last_n_p = 0; |
||
1051 | killagreg | 1085 | if(IntegralFehlerNick < -FEHLER_LIMIT2) |
395 | hbuss | 1086 | { |
1087 | if(last_n_n) |
||
1051 | killagreg | 1088 | { |
1173 | hbuss | 1089 | cnt += labs(IntegralFehlerNick) / (FEHLER_LIMIT2 / 8); |
492 | hbuss | 1090 | ausgleichNick = IntegralFehlerNick / 8; |
401 | hbuss | 1091 | if(ausgleichNick < -5000) ausgleichNick = -5000; |
498 | hbuss | 1092 | LageKorrekturNick += ausgleichNick / ABGLEICH_ANZAHL; |
1051 | killagreg | 1093 | } |
395 | hbuss | 1094 | else last_n_n = 1; |
1095 | } else last_n_n = 0; |
||
1051 | killagreg | 1096 | } |
1097 | else |
||
847 | hbuss | 1098 | { |
1099 | cnt = 0; |
||
921 | hbuss | 1100 | KompassSignalSchlecht = 1000; |
1051 | killagreg | 1101 | } |
499 | hbuss | 1102 | if(cnt > EE_Parameter.Driftkomp) cnt = EE_Parameter.Driftkomp; |
1173 | hbuss | 1103 | if(FromNaviCtrl_Value.Kalman_MaxDrift) if(cnt > FromNaviCtrl_Value.Kalman_MaxDrift) cnt = FromNaviCtrl_Value.Kalman_MaxDrift; |
395 | hbuss | 1104 | if(IntegralFehlerNick > FEHLER_LIMIT) AdNeutralNick += cnt; |
1105 | if(IntegralFehlerNick < -FEHLER_LIMIT) AdNeutralNick -= cnt; |
||
401 | hbuss | 1106 | |
395 | hbuss | 1107 | // Roll +++++++++++++++++++++++++++++++++++++++++++++++++ |
492 | hbuss | 1108 | cnt = 1;// + labs(IntegralFehlerNick) / 4096; |
1225 | hbuss | 1109 | if(labs(IntegralFehlerRoll) > FEHLER_LIMIT1) cnt = 4; |
498 | hbuss | 1110 | ausgleichRoll = 0; |
1173 | hbuss | 1111 | if(labs(MittelIntegralRoll_Alt - MittelIntegralRoll) < BEWEGUNGS_LIMIT || (FromNaviCtrl_Value.Kalman_MaxDrift > 3*8)) |
492 | hbuss | 1112 | { |
1051 | killagreg | 1113 | if(IntegralFehlerRoll > FEHLER_LIMIT2) |
395 | hbuss | 1114 | { |
1051 | killagreg | 1115 | if(last_r_p) |
395 | hbuss | 1116 | { |
1173 | hbuss | 1117 | cnt += labs(IntegralFehlerRoll) / (FEHLER_LIMIT2 / 8); |
492 | hbuss | 1118 | ausgleichRoll = IntegralFehlerRoll / 8; |
401 | hbuss | 1119 | if(ausgleichRoll > 5000) ausgleichRoll = 5000; |
498 | hbuss | 1120 | LageKorrekturRoll += ausgleichRoll / ABGLEICH_ANZAHL; |
1051 | killagreg | 1121 | } |
395 | hbuss | 1122 | else last_r_p = 1; |
1123 | } else last_r_p = 0; |
||
1051 | killagreg | 1124 | if(IntegralFehlerRoll < -FEHLER_LIMIT2) |
395 | hbuss | 1125 | { |
1051 | killagreg | 1126 | if(last_r_n) |
395 | hbuss | 1127 | { |
1173 | hbuss | 1128 | cnt += labs(IntegralFehlerRoll) / (FEHLER_LIMIT2 / 8); |
492 | hbuss | 1129 | ausgleichRoll = IntegralFehlerRoll / 8; |
401 | hbuss | 1130 | if(ausgleichRoll < -5000) ausgleichRoll = -5000; |
498 | hbuss | 1131 | LageKorrekturRoll += ausgleichRoll / ABGLEICH_ANZAHL; |
395 | hbuss | 1132 | } |
1133 | else last_r_n = 1; |
||
1134 | } else last_r_n = 0; |
||
1051 | killagreg | 1135 | } else |
492 | hbuss | 1136 | { |
1137 | cnt = 0; |
||
921 | hbuss | 1138 | KompassSignalSchlecht = 1000; |
1051 | killagreg | 1139 | } |
499 | hbuss | 1140 | if(cnt > EE_Parameter.Driftkomp) cnt = EE_Parameter.Driftkomp; |
1173 | hbuss | 1141 | if(FromNaviCtrl_Value.Kalman_MaxDrift) if(cnt > FromNaviCtrl_Value.Kalman_MaxDrift) cnt = FromNaviCtrl_Value.Kalman_MaxDrift; |
395 | hbuss | 1142 | if(IntegralFehlerRoll > FEHLER_LIMIT) AdNeutralRoll += cnt; |
1143 | if(IntegralFehlerRoll < -FEHLER_LIMIT) AdNeutralRoll -= cnt; |
||
173 | holgerb | 1144 | } |
1051 | killagreg | 1145 | else |
498 | hbuss | 1146 | { |
1147 | LageKorrekturRoll = 0; |
||
1148 | LageKorrekturNick = 0; |
||
880 | hbuss | 1149 | TrichterFlug = 0; |
498 | hbuss | 1150 | } |
1051 | killagreg | 1151 | |
498 | hbuss | 1152 | if(!IntegralFaktor) { LageKorrekturRoll = 0; LageKorrekturNick = 0;} // z.B. bei HH |
1051 | killagreg | 1153 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++ |
1154 | MittelIntegralNick_Alt = MittelIntegralNick; |
||
1155 | MittelIntegralRoll_Alt = MittelIntegralRoll; |
||
1156 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
395 | hbuss | 1157 | IntegralAccNick = 0; |
1158 | IntegralAccRoll = 0; |
||
1159 | IntegralAccZ = 0; |
||
1160 | MittelIntegralNick = 0; |
||
1161 | MittelIntegralRoll = 0; |
||
1162 | MittelIntegralNick2 = 0; |
||
1163 | MittelIntegralRoll2 = 0; |
||
1164 | ZaehlMessungen = 0; |
||
1173 | hbuss | 1165 | } // ZaehlMessungen >= ABGLEICH_ANZAHL |
395 | hbuss | 1166 | |
1051 | killagreg | 1167 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
1 | ingob | 1168 | // Gieren |
1051 | killagreg | 1169 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
693 | hbuss | 1170 | // if(GasMischanteil < 35) { if(StickGier > 10) StickGier = 10; else if(StickGier < -10) StickGier = -10;}; |
1051 | killagreg | 1171 | if(abs(StickGier) > 15) // war 35 |
1 | ingob | 1172 | { |
921 | hbuss | 1173 | KompassSignalSchlecht = 1000; |
1051 | killagreg | 1174 | if(!(EE_Parameter.GlobalConfig & CFG_KOMPASS_FIX)) |
1175 | { |
||
1176 | NeueKompassRichtungMerken = 1; |
||
824 | hbuss | 1177 | }; |
1 | ingob | 1178 | } |
395 | hbuss | 1179 | tmp_int = (long) EE_Parameter.Gier_P * ((long)StickGier * abs(StickGier)) / 512L; // expo y = ax + bx² |
1051 | killagreg | 1180 | tmp_int += (EE_Parameter.Gier_P * StickGier) / 4; |
173 | holgerb | 1181 | sollGier = tmp_int; |
1051 | killagreg | 1182 | Mess_Integral_Gier -= tmp_int; |
395 | hbuss | 1183 | if(Mess_Integral_Gier > 50000) Mess_Integral_Gier = 50000; // begrenzen |
1184 | if(Mess_Integral_Gier <-50000) Mess_Integral_Gier =-50000; |
||
1051 | killagreg | 1185 | |
1186 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
1 | ingob | 1187 | // Kompass |
1051 | killagreg | 1188 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
1175 | hbuss | 1189 | //DebugOut.Analog[16] = KompassSignalSchlecht; |
819 | hbuss | 1190 | |
1051 | killagreg | 1191 | if(KompassValue && (EE_Parameter.GlobalConfig & CFG_KOMPASS_AKTIV)) |
1 | ingob | 1192 | { |
819 | hbuss | 1193 | int w,v,r,fehler,korrektur; |
1 | ingob | 1194 | w = abs(IntegralNick /512); // mit zunehmender Neigung den Einfluss drosseln |
1195 | v = abs(IntegralRoll /512); |
||
1196 | if(v > w) w = v; // grösste Neigung ermitteln |
||
824 | hbuss | 1197 | korrektur = w / 8 + 1; |
921 | hbuss | 1198 | fehler = ((540 + KompassValue - (ErsatzKompass/GIER_GRAD_FAKTOR)) % 360) - 180; |
1171 | hbuss | 1199 | if(abs(MesswertGier) > 128) |
1036 | hbuss | 1200 | { |
1201 | fehler = 0; |
||
1051 | killagreg | 1202 | } |
921 | hbuss | 1203 | if(!KompassSignalSchlecht && w < 25) |
1204 | { |
||
1205 | GierGyroFehler += fehler; |
||
1051 | killagreg | 1206 | if(NeueKompassRichtungMerken) |
1207 | { |
||
1352 | hbuss | 1208 | // beeptime = 200; |
847 | hbuss | 1209 | // KompassStartwert = KompassValue; |
1171 | hbuss | 1210 | ErsatzKompass = KompassValue * GIER_GRAD_FAKTOR; |
921 | hbuss | 1211 | KompassStartwert = (ErsatzKompass/GIER_GRAD_FAKTOR); |
1212 | NeueKompassRichtungMerken = 0; |
||
1213 | } |
||
1 | ingob | 1214 | } |
824 | hbuss | 1215 | ErsatzKompass += (fehler * 8) / korrektur; |
921 | hbuss | 1216 | w = (w * Parameter_KompassWirkung) / 32; // auf die Wirkung normieren |
1 | ingob | 1217 | w = Parameter_KompassWirkung - w; // Wirkung ggf drosseln |
921 | hbuss | 1218 | if(w >= 0) |
1 | ingob | 1219 | { |
1051 | killagreg | 1220 | if(!KompassSignalSchlecht) |
693 | hbuss | 1221 | { |
1051 | killagreg | 1222 | v = 64 + ((MaxStickNick + MaxStickRoll)) / 8; |
847 | hbuss | 1223 | r = ((540 + (ErsatzKompass/GIER_GRAD_FAKTOR) - KompassStartwert) % 360) - 180; |
1224 | // r = KompassRichtung; |
||
819 | hbuss | 1225 | v = (r * w) / v; // nach Kompass ausrichten |
1226 | w = 3 * Parameter_KompassWirkung; |
||
693 | hbuss | 1227 | if(v > w) v = w; // Begrenzen |
1051 | killagreg | 1228 | else |
693 | hbuss | 1229 | if(v < -w) v = -w; |
1230 | Mess_Integral_Gier += v; |
||
1051 | killagreg | 1231 | } |
693 | hbuss | 1232 | if(KompassSignalSchlecht) KompassSignalSchlecht--; |
1051 | killagreg | 1233 | } |
921 | hbuss | 1234 | else KompassSignalSchlecht = 500; // so lange das Signal taub stellen --> ca. 1 sek |
1051 | killagreg | 1235 | } |
1 | ingob | 1236 | |
1051 | killagreg | 1237 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
1 | ingob | 1238 | // Drehgeschwindigkeit und -winkel zu einem Istwert zusammenfassen |
1051 | killagreg | 1239 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
1216 | killagreg | 1240 | if(TrichterFlug) { SummeRoll = 0; SummeNick = 0;}; |
604 | hbuss | 1241 | |
1171 | hbuss | 1242 | if(!Looping_Nick) IntegralNickMalFaktor = (IntegralNick * IntegralFaktor) / (44000 / STICK_GAIN); else IntegralNickMalFaktor = 0; |
1243 | if(!Looping_Roll) IntegralRollMalFaktor = (IntegralRoll * IntegralFaktor) / (44000 / STICK_GAIN); else IntegralRollMalFaktor = 0; |
||
1153 | hbuss | 1244 | |
1167 | hbuss | 1245 | #define TRIM_MAX 200 |
1166 | hbuss | 1246 | if(TrimNick > TRIM_MAX) TrimNick = TRIM_MAX; else if(TrimNick <-TRIM_MAX) TrimNick =-TRIM_MAX; |
1247 | if(TrimRoll > TRIM_MAX) TrimRoll = TRIM_MAX; else if(TrimRoll <-TRIM_MAX) TrimRoll =-TRIM_MAX; |
||
1153 | hbuss | 1248 | |
1166 | hbuss | 1249 | MesswertNick = IntegralNickMalFaktor + (long)((long)MesswertNick * GyroFaktor + (long)TrimNick * 128L) / (256L / STICK_GAIN); |
1250 | MesswertRoll = IntegralRollMalFaktor + (long)((long)MesswertRoll * GyroFaktor + (long)TrimRoll * 128L) / (256L / STICK_GAIN); |
||
1211 | hbuss | 1251 | MesswertGier = (long)(MesswertGier * 2 * (long)GyroFaktorGier) / (256L / STICK_GAIN) + (long)(Integral_Gier * IntegralFaktorGier) / (2 * (44000 / STICK_GAIN)); |
1166 | hbuss | 1252 | |
1 | ingob | 1253 | // Maximalwerte abfangen |
1153 | hbuss | 1254 | // #define MAX_SENSOR (4096*STICK_GAIN) |
1255 | #define MAX_SENSOR (4096*4) |
||
1216 | killagreg | 1256 | if(MesswertNick > MAX_SENSOR) MesswertNick = MAX_SENSOR; |
1 | ingob | 1257 | if(MesswertNick < -MAX_SENSOR) MesswertNick = -MAX_SENSOR; |
1258 | if(MesswertRoll > MAX_SENSOR) MesswertRoll = MAX_SENSOR; |
||
1259 | if(MesswertRoll < -MAX_SENSOR) MesswertRoll = -MAX_SENSOR; |
||
1260 | if(MesswertGier > MAX_SENSOR) MesswertGier = MAX_SENSOR; |
||
1261 | if(MesswertGier < -MAX_SENSOR) MesswertGier = -MAX_SENSOR; |
||
1262 | |||
1051 | killagreg | 1263 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
1 | ingob | 1264 | // Höhenregelung |
1265 | // Die Höhenregelung schwächt lediglich das Gas ab, erhöht es allerdings nicht |
||
1051 | killagreg | 1266 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
1374 | hbuss | 1267 | if(UBat > BattLowVoltageWarning) GasMischanteil = ((unsigned int)GasMischanteil * BattLowVoltageWarning) / UBat; // Gas auf das aktuelle Spannungvieveau beziehen |
855 | hbuss | 1268 | GasMischanteil *= STICK_GAIN; |
1309 | hbuss | 1269 | // if height control is activated |
1322 | hbuss | 1270 | if((EE_Parameter.GlobalConfig & CFG_HOEHENREGELUNG) && !(Looping_Roll || Looping_Nick)) // Höhenregelung |
1309 | hbuss | 1271 | { |
1590 | killagreg | 1272 | #define HOVER_GAS_AVERAGE 4096L // 4096 * 2ms = 8.2s averaging |
1332 | hbuss | 1273 | #define HC_GAS_AVERAGE 4 // 4 * 2ms= 8ms averaging |
1638 | holgerb | 1274 | |
1275 | #if (defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__)) |
||
1276 | #define OPA_OFFSET_STEP 15 |
||
1642 | killagreg | 1277 | #else |
1638 | holgerb | 1278 | #define OPA_OFFSET_STEP 10 |
1279 | #endif |
||
1587 | killagreg | 1280 | int HCGas, HeightDeviation = 0; |
1309 | hbuss | 1281 | static int HeightTrimming = 0; // rate for change of height setpoint |
1282 | static int FilterHCGas = 0; |
||
1587 | killagreg | 1283 | static int StickGasHover = 120, HoverGas = 0, HoverGasMin = 0, HoverGasMax = 1023; |
1284 | static unsigned long HoverGasFilter = 0; |
||
1322 | hbuss | 1285 | static unsigned char delay = 100, BaroAtUpperLimit = 0, BaroAtLowerLimit = 0; |
1320 | hbuss | 1286 | int CosAttitude; // for projection of hoover gas |
1330 | killagreg | 1287 | |
1309 | hbuss | 1288 | // get the current hooverpoint |
1587 | killagreg | 1289 | DebugOut.Analog[21] = HoverGas; |
1642 | killagreg | 1290 | |
1322 | hbuss | 1291 | // Expand the measurement |
1292 | // measurement of air pressure close to upper limit and no overflow in correction of the new OCR0A value occurs |
||
1293 | if(!BaroExpandActive) |
||
1294 | { |
||
1295 | if(MessLuftdruck > 920) |
||
1296 | { // increase offset |
||
1330 | killagreg | 1297 | if(OCR0A < (255 - OPA_OFFSET_STEP)) |
1322 | hbuss | 1298 | { |
1299 | ExpandBaro -= 1; |
||
1300 | OCR0A = DruckOffsetSetting - OPA_OFFSET_STEP * ExpandBaro; // increase offset to shift ADC down |
||
1301 | beeptime = 300; |
||
1352 | hbuss | 1302 | BaroExpandActive = 350; |
1330 | killagreg | 1303 | } |
1304 | else |
||
1322 | hbuss | 1305 | { |
1306 | BaroAtLowerLimit = 1; |
||
1307 | } |
||
1308 | } |
||
1309 | // measurement of air pressure close to lower limit and |
||
1330 | killagreg | 1310 | else |
1322 | hbuss | 1311 | if(MessLuftdruck < 100) |
1312 | { // decrease offset |
||
1330 | killagreg | 1313 | if(OCR0A > OPA_OFFSET_STEP) |
1322 | hbuss | 1314 | { |
1315 | ExpandBaro += 1; |
||
1316 | OCR0A = DruckOffsetSetting - OPA_OFFSET_STEP * ExpandBaro; // decrease offset to shift ADC up |
||
1317 | beeptime = 300; |
||
1352 | hbuss | 1318 | BaroExpandActive = 350; |
1330 | killagreg | 1319 | } |
1320 | else |
||
1322 | hbuss | 1321 | { |
1322 | BaroAtUpperLimit = 1; |
||
1323 | } |
||
1324 | } |
||
1330 | killagreg | 1325 | else |
1322 | hbuss | 1326 | { |
1327 | BaroAtUpperLimit = 0; |
||
1328 | BaroAtLowerLimit = 0; |
||
1329 | } |
||
1330 | } |
||
1331 | else // delay, because of expanding the Baro-Range |
||
1332 | { |
||
1333 | // now clear the D-values |
||
1334 | SummenHoehe = HoehenWert * SM_FILTER; |
||
1335 | VarioMeter = 0; |
||
1336 | BaroExpandActive--; |
||
1337 | } |
||
1328 | hbuss | 1338 | |
1339 | // if height control is activated by an rc channel |
||
1340 | if(EE_Parameter.GlobalConfig & CFG_HOEHEN_SCHALTER) // Regler wird über Schalter gesteuert |
||
1341 | { // check if parameter is less than activation threshold |
||
1342 | if(Parameter_MaxHoehe < 50) // for 3 or 2-state switch height control is disabled in lowest position |
||
1343 | { //height control not active |
||
1344 | if(!delay--) |
||
1345 | { |
||
1346 | HoehenReglerAktiv = 0; // disable height control |
||
1347 | SollHoehe = HoehenWert; // update SetPoint with current reading |
||
1348 | delay = 1; |
||
1349 | } |
||
1350 | } |
||
1351 | else |
||
1352 | { //height control is activated |
||
1353 | HoehenReglerAktiv = 1; // enable height control |
||
1334 | killagreg | 1354 | delay = 200; |
1328 | hbuss | 1355 | } |
1051 | killagreg | 1356 | } |
1309 | hbuss | 1357 | else // no switchable height control |
1358 | { |
||
1359 | SollHoehe = ((int16_t) ExternHoehenValue + (int16_t) Parameter_MaxHoehe) * (int)EE_Parameter.Hoehe_Verstaerkung; |
||
1360 | HoehenReglerAktiv = 1; |
||
1051 | killagreg | 1361 | } |
1322 | hbuss | 1362 | |
1320 | hbuss | 1363 | // calculate cos of nick and roll angle used for projection of the vertical hoover gas |
1330 | killagreg | 1364 | tmp_int = (int)(IntegralNick/GIER_GRAD_FAKTOR); // nick angle in deg |
1365 | tmp_int2 = (int)(IntegralRoll/GIER_GRAD_FAKTOR); // roll angle in deg |
||
1366 | CosAttitude = (int16_t)ihypot(tmp_int, tmp_int2); // phytagoras gives effective attitude angle in deg |
||
1320 | hbuss | 1367 | LIMIT_MAX(CosAttitude, 60); // limit effective attitude angle |
1368 | CosAttitude = c_cos_8192(CosAttitude); // cos of actual attitude |
||
1591 | holgerb | 1369 | VarioCharacter = ' '; |
1420 | killagreg | 1370 | if(HoehenReglerAktiv && !(FCFlags & FCFLAG_NOTLANDUNG)) |
1309 | hbuss | 1371 | { |
1372 | #define HEIGHT_TRIM_UP 0x01 |
||
1373 | #define HEIGHT_TRIM_DOWN 0x02 |
||
1374 | static unsigned char HeightTrimmingFlag = 0x00; |
||
1375 | |||
1330 | killagreg | 1376 | #define HEIGHT_CONTROL_STICKTHRESHOLD 15 |
1309 | hbuss | 1377 | // Holger original version |
1378 | // start of height control algorithm |
||
1379 | // the height control is only an attenuation of the actual gas stick. |
||
1380 | // I.e. it will work only if the gas stick is higher than the hover gas |
||
1381 | // and the hover height will be allways larger than height setpoint. |
||
1314 | killagreg | 1382 | if((EE_Parameter.ExtraConfig & CFG2_HEIGHT_LIMIT) || !(EE_Parameter.GlobalConfig & CFG_HOEHEN_SCHALTER)) // Regler wird über Schalter gesteuert) |
1383 | { // old version |
||
1309 | hbuss | 1384 | HCGas = GasMischanteil; // take current stick gas as neutral point for the height control |
1385 | HeightTrimming = 0; |
||
1386 | } |
||
1314 | killagreg | 1387 | else |
1309 | hbuss | 1388 | { |
1389 | // alternative height control |
||
1390 | // PD-Control with respect to hoover point |
||
1391 | // the thrust loss out of horizontal attitude is compensated |
||
1392 | // the setpoint will be fine adjusted with the gas stick position |
||
1420 | killagreg | 1393 | if(FCFlags & FCFLAG_FLY) // trim setpoint only when flying |
1309 | hbuss | 1394 | { // gas stick is above hoover point |
1587 | killagreg | 1395 | if(StickGas > (StickGasHover + HEIGHT_CONTROL_STICKTHRESHOLD) && !BaroAtUpperLimit) |
1309 | hbuss | 1396 | { |
1397 | if(HeightTrimmingFlag & HEIGHT_TRIM_DOWN) |
||
1398 | { |
||
1399 | HeightTrimmingFlag &= ~HEIGHT_TRIM_DOWN; |
||
1400 | SollHoehe = HoehenWert; // update setpoint to current heigth |
||
1401 | } |
||
1402 | HeightTrimmingFlag |= HEIGHT_TRIM_UP; |
||
1587 | killagreg | 1403 | HeightTrimming += abs(StickGas - (StickGasHover + HEIGHT_CONTROL_STICKTHRESHOLD)); |
1591 | holgerb | 1404 | VarioCharacter = '+'; |
1309 | hbuss | 1405 | } // gas stick is below hoover point |
1587 | killagreg | 1406 | else if(StickGas < (StickGasHover - HEIGHT_CONTROL_STICKTHRESHOLD) && !BaroAtLowerLimit ) |
1309 | hbuss | 1407 | { |
1408 | if(HeightTrimmingFlag & HEIGHT_TRIM_UP) |
||
1409 | { |
||
1410 | HeightTrimmingFlag &= ~HEIGHT_TRIM_UP; |
||
1411 | SollHoehe = HoehenWert; // update setpoint to current heigth |
||
1412 | } |
||
1413 | HeightTrimmingFlag |= HEIGHT_TRIM_DOWN; |
||
1587 | killagreg | 1414 | HeightTrimming -= abs(StickGas - (StickGasHover - HEIGHT_CONTROL_STICKTHRESHOLD)); |
1591 | holgerb | 1415 | VarioCharacter = '-'; |
1309 | hbuss | 1416 | } |
1587 | killagreg | 1417 | else // Gas Stick in Hover Range |
1309 | hbuss | 1418 | { |
1352 | hbuss | 1419 | if(HeightTrimmingFlag & (HEIGHT_TRIM_UP | HEIGHT_TRIM_DOWN)) |
1309 | hbuss | 1420 | { |
1352 | hbuss | 1421 | HeightTrimmingFlag &= ~(HEIGHT_TRIM_UP | HEIGHT_TRIM_DOWN); |
1309 | hbuss | 1422 | HeightTrimming = 0; |
1423 | SollHoehe = HoehenWert; // update setpoint to current height |
||
1424 | if(EE_Parameter.ExtraConfig & CFG2_VARIO_BEEP) beeptime = 500; |
||
1425 | } |
||
1591 | holgerb | 1426 | VarioCharacter = '='; |
1309 | hbuss | 1427 | } |
1428 | // Trim height set point |
||
1334 | killagreg | 1429 | if(abs(HeightTrimming) > 512) |
1309 | hbuss | 1430 | { |
1332 | hbuss | 1431 | SollHoehe += (HeightTrimming * EE_Parameter.Hoehe_Verstaerkung)/(5 * 512 / 2); // move setpoint |
1309 | hbuss | 1432 | HeightTrimming = 0; |
1587 | killagreg | 1433 | LIMIT_MIN_MAX(SollHoehe, (HoehenWert-1024), (HoehenWert+1024)); // max. 10m Unterschied |
1309 | hbuss | 1434 | if(EE_Parameter.ExtraConfig & CFG2_VARIO_BEEP) beeptime = 75; |
1320 | hbuss | 1435 | //update hoover gas stick value when setpoint is shifted |
1332 | hbuss | 1436 | if(!EE_Parameter.Hoehe_StickNeutralPoint) |
1437 | { |
||
1587 | killagreg | 1438 | StickGasHover = HoverGas/STICK_GAIN; //rescale back to stick value |
1439 | StickGasHover = (StickGasHover * UBat) / BattLowVoltageWarning; |
||
1440 | if(StickGasHover < 70) StickGasHover = 70; |
||
1441 | else if(StickGasHover > 150) StickGasHover = 150; |
||
1332 | hbuss | 1442 | } |
1309 | hbuss | 1443 | } |
1352 | hbuss | 1444 | if(BaroExpandActive) SollHoehe = HoehenWert; // update setpoint to current altitude if Expanding is active |
1420 | killagreg | 1445 | } //if FCFlags & MKFCFLAG_FLY |
1330 | killagreg | 1446 | else |
1447 | { |
||
1322 | hbuss | 1448 | SollHoehe = HoehenWert - 400; |
1587 | killagreg | 1449 | if(EE_Parameter.Hoehe_StickNeutralPoint) StickGasHover = EE_Parameter.Hoehe_StickNeutralPoint; |
1450 | else StickGasHover = 120; |
||
1320 | hbuss | 1451 | } |
1590 | killagreg | 1452 | HCGas = HoverGas; // take hover gas (neutral point) |
1453 | } |
||
1314 | killagreg | 1454 | if(HoehenWert > SollHoehe || !(EE_Parameter.ExtraConfig & CFG2_HEIGHT_LIMIT)) |
1283 | hbuss | 1455 | { |
1590 | killagreg | 1456 | // from this point the Heigth Control Algorithm is identical for both versions |
1457 | if(BaroExpandActive) // baro range expanding active |
||
1458 | { |
||
1459 | HCGas = HoverGas; // hover while expanding baro adc range |
||
1460 | HeightDeviation = 0; |
||
1461 | } // EOF // baro range expanding active |
||
1462 | else // valid data from air pressure sensor |
||
1463 | { |
||
1464 | // ------------------------- P-Part ---------------------------- |
||
1465 | tmp_long = (HoehenWert - SollHoehe); // positive when too high |
||
1466 | LIMIT_MIN_MAX(tmp_long, -32767L, 32767L); // avoid overflov when casting to int16_t |
||
1467 | HeightDeviation = (int)(tmp_long); // positive when too high |
||
1468 | tmp_long = (tmp_long * (long)Parameter_Hoehe_P) / 16L; // p-part |
||
1469 | LIMIT_MIN_MAX(tmp_long, -255 * STICK_GAIN, 255 * STICK_GAIN); // more than 2 times the full range makes no sense |
||
1470 | HCGas -= tmp_long; |
||
1471 | // ------------------------- D-Part 1: Vario Meter ---------------------------- |
||
1472 | tmp_int = VarioMeter / 8; |
||
1473 | LIMIT_MIN_MAX(tmp_int, -181, 181); // avoid overflow when squared (181^2 = 32761) |
||
1474 | tmp_int2 = tmp_int; |
||
1475 | LIMIT_MAX(tmp_int2, 8); // limit quadratic part on upward movement to avoid to much gas reduction |
||
1476 | if(tmp_int2 > 0) tmp_int = tmp_int + (tmp_int2 * tmp_int2) / 4; |
||
1477 | else tmp_int = tmp_int - (tmp_int2 * tmp_int2) / 4; |
||
1478 | tmp_int = (tmp_int * (long)Parameter_Luftdruck_D) / 128L; // scale to d-gain parameter |
||
1479 | LIMIT_MIN_MAX(tmp_int,-32 * STICK_GAIN, 64 * STICK_GAIN); |
||
1480 | HCGas -= tmp_int; |
||
1481 | } // EOF no baro range expanding |
||
1309 | hbuss | 1482 | // ------------------------ D-Part 2: ACC-Z Integral ------------------------ |
1587 | killagreg | 1483 | tmp_long = ((Mess_Integral_Hoch / 128L) * (int32_t) Parameter_Hoehe_ACC_Wirkung) / (128L / STICK_GAIN); |
1484 | LIMIT_MIN_MAX(tmp_long, -32 * STICK_GAIN, 64 * STICK_GAIN); |
||
1485 | HCGas -= tmp_long; |
||
1486 | // ------------------------ D-Part 3: GpsZ ---------------------------------- |
||
1588 | killagreg | 1487 | tmp_int = (Parameter_Hoehe_GPS_Z * (int)FromNaviCtrl_Value.GpsZ)/128L; |
1488 | LIMIT_MIN_MAX(tmp_int, -32 * STICK_GAIN, 64 * STICK_GAIN); |
||
1309 | hbuss | 1489 | HCGas -= tmp_int; |
1587 | killagreg | 1490 | |
1309 | hbuss | 1491 | // limit deviation from hoover point within the target region |
1587 | killagreg | 1492 | if( (abs(HeightDeviation) < 150) && (!HeightTrimming) && (HoverGas > 0)) // height setpoint is not changed and hoover gas not zero |
1309 | hbuss | 1493 | { |
1587 | killagreg | 1494 | LIMIT_MIN_MAX(HCGas, HoverGasMin, HoverGasMax); // limit gas around the hoover point |
1309 | hbuss | 1495 | } |
1276 | hbuss | 1496 | |
1322 | hbuss | 1497 | // strech control output by inverse attitude projection 1/cos |
1498 | // + 1/cos(angle) ++++++++++++++++++++++++++ |
||
1330 | killagreg | 1499 | tmp_long2 = (int32_t)HCGas; |
1500 | tmp_long2 *= 8192L; |
||
1501 | tmp_long2 /= CosAttitude; |
||
1502 | HCGas = (int16_t)tmp_long2; |
||
1309 | hbuss | 1503 | // update height control gas averaging |
1504 | FilterHCGas = (FilterHCGas * (HC_GAS_AVERAGE - 1) + HCGas) / HC_GAS_AVERAGE; |
||
1505 | // limit height control gas pd-control output |
||
1506 | LIMIT_MIN_MAX(FilterHCGas, EE_Parameter.Hoehe_MinGas * STICK_GAIN, (MAX_GAS - 20) * STICK_GAIN); |
||
1507 | // set GasMischanteil to HeightControlGasFilter |
||
1314 | killagreg | 1508 | if(EE_Parameter.ExtraConfig & CFG2_HEIGHT_LIMIT) |
1587 | killagreg | 1509 | { // old version |
1510 | LIMIT_MAX(FilterHCGas, GasMischanteil); // nicht mehr als Gas |
||
1511 | } |
||
1309 | hbuss | 1512 | GasMischanteil = FilterHCGas; |
1314 | killagreg | 1513 | } |
1309 | hbuss | 1514 | }// EOF height control active |
1320 | hbuss | 1515 | else // HC not active |
1516 | { |
||
1517 | //update hoover gas stick value when HC is not active |
||
1587 | killagreg | 1518 | if(!EE_Parameter.Hoehe_StickNeutralPoint) |
1519 | { |
||
1520 | StickGasHover = HoverGas/STICK_GAIN; // rescale back to stick value |
||
1521 | StickGasHover = (StickGasHover * UBat) / BattLowVoltageWarning; |
||
1322 | hbuss | 1522 | } |
1587 | killagreg | 1523 | else StickGasHover = EE_Parameter.Hoehe_StickNeutralPoint; |
1524 | LIMIT_MIN_MAX(StickGasHover, 70, 150); // reserve some range for trim up and down |
||
1328 | hbuss | 1525 | FilterHCGas = GasMischanteil; |
1330 | killagreg | 1526 | } |
1283 | hbuss | 1527 | |
1587 | killagreg | 1528 | // Hover gas estimation by averaging gas control output on small z-velocities |
1309 | hbuss | 1529 | // this is done only if height contol option is selected in global config and aircraft is flying |
1420 | killagreg | 1530 | if((FCFlags & FCFLAG_FLY) && !(FCFlags & FCFLAG_NOTLANDUNG)) |
1309 | hbuss | 1531 | { |
1590 | killagreg | 1532 | if(HoverGasFilter == 0) HoverGasFilter = HOVER_GAS_AVERAGE * (unsigned long)(GasMischanteil); // init estimation |
1309 | hbuss | 1533 | if(abs(VarioMeter) < 100) // only on small vertical speed |
1534 | { |
||
1330 | killagreg | 1535 | tmp_long2 = (int32_t)GasMischanteil; // take current thrust |
1536 | tmp_long2 *= CosAttitude; // apply attitude projection |
||
1537 | tmp_long2 /= 8192; |
||
1538 | |||
1309 | hbuss | 1539 | // average vertical projected thrust |
1540 | if(modell_fliegt < 2000) // the first 4 seconds |
||
1541 | { // reduce the time constant of averaging by factor of 8 to get much faster a stable value |
||
1590 | killagreg | 1542 | HoverGasFilter -= HoverGasFilter/(HOVER_GAS_AVERAGE/8L); |
1587 | killagreg | 1543 | HoverGasFilter += 8L * tmp_long2; |
1309 | hbuss | 1544 | } |
1545 | else if(modell_fliegt < 4000) // the first 8 seconds |
||
1546 | { // reduce the time constant of averaging by factor of 4 to get much faster a stable value |
||
1590 | killagreg | 1547 | HoverGasFilter -= HoverGasFilter/(HOVER_GAS_AVERAGE/4L); |
1587 | killagreg | 1548 | HoverGasFilter += 4L * tmp_long2; |
1309 | hbuss | 1549 | } |
1550 | else if(modell_fliegt < 8000) // the first 16 seconds |
||
1551 | { // reduce the time constant of averaging by factor of 2 to get much faster a stable value |
||
1590 | killagreg | 1552 | HoverGasFilter -= HoverGasFilter/(HOVER_GAS_AVERAGE/2L); |
1587 | killagreg | 1553 | HoverGasFilter += 2L * tmp_long2; |
1309 | hbuss | 1554 | } |
1555 | else //later |
||
1556 | { |
||
1590 | killagreg | 1557 | HoverGasFilter -= HoverGasFilter/HOVER_GAS_AVERAGE; |
1587 | killagreg | 1558 | HoverGasFilter += tmp_long2; |
1309 | hbuss | 1559 | } |
1590 | killagreg | 1560 | HoverGas = (int16_t)(HoverGasFilter/HOVER_GAS_AVERAGE); |
1309 | hbuss | 1561 | if(EE_Parameter.Hoehe_HoverBand) |
1562 | { |
||
1563 | int16_t band; |
||
1587 | killagreg | 1564 | band = HoverGas / EE_Parameter.Hoehe_HoverBand; // the higher the parameter the smaller the range |
1565 | HoverGasMin = HoverGas - band; |
||
1566 | HoverGasMax = HoverGas + band; |
||
1309 | hbuss | 1567 | } |
1568 | else |
||
1569 | { // no limit |
||
1587 | killagreg | 1570 | HoverGasMin = 0; |
1571 | HoverGasMax = 1023; |
||
1309 | hbuss | 1572 | } |
1573 | } |
||
1574 | } |
||
1575 | }// EOF ParamSet.GlobalConfig & CFG_HEIGHT_CONTROL |
||
1576 | |||
1577 | // limit gas to parameter setting |
||
1320 | hbuss | 1578 | LIMIT_MIN(GasMischanteil, (MIN_GAS + 10) * STICK_GAIN); |
855 | hbuss | 1579 | if(GasMischanteil > (MAX_GAS - 20) * STICK_GAIN) GasMischanteil = (MAX_GAS - 20) * STICK_GAIN; |
1111 | hbuss | 1580 | |
1051 | killagreg | 1581 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
1320 | hbuss | 1582 | // all BL-Ctrl connected? |
1583 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
1330 | killagreg | 1584 | if(MissingMotor) |
1320 | hbuss | 1585 | if(modell_fliegt > 1 && modell_fliegt < 50 && GasMischanteil > 0) |
1586 | { |
||
1587 | modell_fliegt = 1; |
||
1588 | GasMischanteil = MIN_GAS; |
||
1589 | } |
||
1590 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
1 | ingob | 1591 | // + Mischer und PI-Regler |
1051 | killagreg | 1592 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
173 | holgerb | 1593 | DebugOut.Analog[7] = GasMischanteil; |
1051 | killagreg | 1594 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
1 | ingob | 1595 | // Gier-Anteil |
1051 | killagreg | 1596 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
855 | hbuss | 1597 | GierMischanteil = MesswertGier - sollGier * STICK_GAIN; // Regler für Gier |
1598 | #define MIN_GIERGAS (40*STICK_GAIN) // unter diesem Gaswert trotzdem Gieren |
||
693 | hbuss | 1599 | if(GasMischanteil > MIN_GIERGAS) |
1600 | { |
||
1051 | killagreg | 1601 | if(GierMischanteil > (GasMischanteil / 2)) GierMischanteil = GasMischanteil / 2; |
1602 | if(GierMischanteil < -(GasMischanteil / 2)) GierMischanteil = -(GasMischanteil / 2); |
||
693 | hbuss | 1603 | } |
1051 | killagreg | 1604 | else |
693 | hbuss | 1605 | { |
1051 | killagreg | 1606 | if(GierMischanteil > (MIN_GIERGAS / 2)) GierMischanteil = MIN_GIERGAS / 2; |
1607 | if(GierMischanteil < -(MIN_GIERGAS / 2)) GierMischanteil = -(MIN_GIERGAS / 2); |
||
693 | hbuss | 1608 | } |
855 | hbuss | 1609 | tmp_int = MAX_GAS*STICK_GAIN; |
1051 | killagreg | 1610 | if(GierMischanteil > ((tmp_int - GasMischanteil))) GierMischanteil = ((tmp_int - GasMischanteil)); |
855 | hbuss | 1611 | if(GierMischanteil < -((tmp_int - GasMischanteil))) GierMischanteil = -((tmp_int - GasMischanteil)); |
513 | hbuss | 1612 | |
1051 | killagreg | 1613 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
1 | ingob | 1614 | // Nick-Achse |
1051 | killagreg | 1615 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
723 | hbuss | 1616 | DiffNick = MesswertNick - StickNick; // Differenz bestimmen |
1153 | hbuss | 1617 | if(IntegralFaktor) SummeNick += IntegralNickMalFaktor - StickNick; // I-Anteil bei Winkelregelung |
1051 | killagreg | 1618 | else SummeNick += DiffNick; // I-Anteil bei HH |
855 | hbuss | 1619 | if(SummeNick > (STICK_GAIN * 16000L)) SummeNick = (STICK_GAIN * 16000L); |
1620 | if(SummeNick < -(16000L * STICK_GAIN)) SummeNick = -(16000L * STICK_GAIN); |
||
1153 | hbuss | 1621 | pd_ergebnis_nick = DiffNick + SummeNick / Ki; // PI-Regler für Nick |
1 | ingob | 1622 | // Motor Vorn |
499 | hbuss | 1623 | tmp_int = (long)((long)Parameter_DynamicStability * (long)(GasMischanteil + abs(GierMischanteil)/2)) / 64; |
1153 | hbuss | 1624 | if(pd_ergebnis_nick > tmp_int) pd_ergebnis_nick = tmp_int; |
1625 | if(pd_ergebnis_nick < -tmp_int) pd_ergebnis_nick = -tmp_int; |
||
173 | holgerb | 1626 | |
1153 | hbuss | 1627 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
1628 | // Roll-Achse |
||
1629 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
1630 | DiffRoll = MesswertRoll - StickRoll; // Differenz bestimmen |
||
1631 | if(IntegralFaktor) SummeRoll += IntegralRollMalFaktor - StickRoll;// I-Anteil bei Winkelregelung |
||
1632 | else SummeRoll += DiffRoll; // I-Anteil bei HH |
||
1633 | if(SummeRoll > (STICK_GAIN * 16000L)) SummeRoll = (STICK_GAIN * 16000L); |
||
1634 | if(SummeRoll < -(16000L * STICK_GAIN)) SummeRoll = -(16000L * STICK_GAIN); |
||
1635 | pd_ergebnis_roll = DiffRoll + SummeRoll / Ki; // PI-Regler für Roll |
||
1636 | tmp_int = (long)((long)Parameter_DynamicStability * (long)(GasMischanteil + abs(GierMischanteil)/2)) / 64; |
||
1637 | if(pd_ergebnis_roll > tmp_int) pd_ergebnis_roll = tmp_int; |
||
1638 | if(pd_ergebnis_roll < -tmp_int) pd_ergebnis_roll = -tmp_int; |
||
1639 | |||
1640 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
1209 | hbuss | 1641 | // Universal Mixer |
1155 | hbuss | 1642 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
1642 | killagreg | 1643 | for(i=0; i<MAX_MOTORS; i++) |
1644 | { |
||
1645 | signed int tmp_int; |
||
1646 | if(Mixer.Motor[i][0] > 0) |
||
1647 | { |
||
1648 | tmp_int = ((long)GasMischanteil * Mixer.Motor[i][0]) / 64L; |
||
1649 | tmp_int += ((long)pd_ergebnis_nick * Mixer.Motor[i][1]) / 64L; |
||
1650 | tmp_int += ((long)pd_ergebnis_roll * Mixer.Motor[i][2]) / 64L; |
||
1651 | tmp_int += ((long)GierMischanteil * Mixer.Motor[i][3]) / 64L; |
||
1652 | tmp_motorwert[i] = MotorSmoothing(tmp_int,tmp_motorwert[i]); // Filter |
||
1653 | tmp_int = tmp_motorwert[i] / 4; |
||
1654 | Motor[i].SetPointLowerBits = tmp_motorwert[i] % 4; |
||
1655 | LIMIT_MIN_MAX(tmp_int,MIN_GAS,MAX_GAS); |
||
1656 | Motor[i].SetPoint = tmp_int; |
||
1657 | } |
||
1658 | else |
||
1659 | { |
||
1660 | Motor[i].SetPoint = 0; |
||
1661 | Motor[i].SetPointLowerBits = 0; |
||
1662 | } |
||
1663 | } |
||
1111 | hbuss | 1664 | } |