Rev 266 | Go to most recent revision | Details | Compare with Previous | Last modification | View Log | RSS feed
Rev | Author | Line No. | Line |
---|---|---|---|
143 | salvo | 1 | /* |
2 | This program (files gps.c and gps.h) is free software; you can redistribute it and/or modify |
||
242 | salvo | 3 | it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; |
143 | salvo | 4 | either version 3 of the License, or (at your option) any later version. |
5 | This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; |
||
6 | without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||
242 | salvo | 7 | GNU General Public License and GNU Lesser General Public License for more details. |
258 | salvo | 8 | You should have received a copy of GNU General Public License (License_GPL.txt) and |
242 | salvo | 9 | GNU Lesser General Public License (License_LGPL.txt) along with this program. |
10 | If not, see <http://www.gnu.org/licenses/>. |
||
143 | salvo | 11 | |
149 | salvo | 12 | Please note: All the other files for the project "Mikrokopter" by H.Buss are under the license (license_buss.txt) published by www.mikrokopter.de |
143 | salvo | 13 | */ |
14 | /*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
15 | Peter Muehlenbrock |
||
16 | Auswertung der Daten vom GPS im ublox Format |
||
182 | salvo | 17 | Hold Modus mit PID Regler |
236 | salvo | 18 | Rückstuerz zur Basis Funktion |
290 | salvo | 19 | Stand 12.10.2007 |
143 | salvo | 20 | ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
21 | */ |
||
1 | ingob | 22 | #include "main.h" |
156 | salvo | 23 | //#include "gps.h" |
1 | ingob | 24 | |
143 | salvo | 25 | // Defines fuer ublox Messageformat um Auswertung zu steuern |
183 | salvo | 26 | #define UBLOX_IDLE 0 |
27 | #define UBLOX_SYNC1 1 |
||
28 | #define UBLOX_SYNC2 2 |
||
29 | #define UBLOX_CLASS 3 |
||
30 | #define UBLOX_ID 4 |
||
31 | #define UBLOX_LEN1 5 |
||
32 | #define UBLOX_LEN2 6 |
||
33 | #define UBLOX_CKA 7 |
||
34 | #define UBLOX_CKB 8 |
||
143 | salvo | 35 | #define UBLOX_PAYLOAD 9 |
36 | |||
37 | // ublox Protokoll Identifier |
||
38 | #define UBLOX_NAV_POSUTM 0x08 |
||
39 | #define UBLOX_NAV_STATUS 0x03 |
||
40 | #define UBLOX_NAV_VELED 0x12 |
||
41 | #define UBLOX_NAV_CLASS 0x01 |
||
42 | #define UBLOX_SYNCH1_CHAR 0xB5 |
||
43 | #define UBLOX_SYNCH2_CHAR 0x62 |
||
44 | |||
258 | salvo | 45 | signed int GPS_Nick = 0; |
46 | signed int GPS_Roll = 0; |
||
47 | short int ublox_msg_state = UBLOX_IDLE; |
||
48 | static uint8_t chk_a =0; //Checksum |
||
49 | static uint8_t chk_b =0; |
||
50 | short int gps_state,gps_sub_state; //Zustaende der Statemachine |
||
51 | short int gps_updte_flag; |
||
52 | signed int GPS_hdng_abs_2trgt; //Winkel zum Ziel bezogen auf Nordpol |
||
53 | signed int GPS_hdng_rel_2trgt; //Winkel zum Ziel bezogen auf Nordachse des Kopters |
||
54 | signed int GPS_dist_2trgt; //vorzeichenlose Distanz zum Ziel |
||
55 | signed int gps_int_x,gps_int_y,gps_reg_x,gps_reg_y; |
||
143 | salvo | 56 | static unsigned int rx_len; |
57 | static unsigned int ptr_payload_data_end; |
||
209 | salvo | 58 | unsigned int gps_alive_cnt; // Wird bei jedem gueltigen GPS Telegramm hochgezaehlt |
258 | salvo | 59 | signed int hdng_2home,dist_2home; //Richtung und Entfernung zur home Position |
60 | static signed gps_tick; //wird bei jedem Update durch das GPS Modul hochgezaehlt |
||
61 | static short int hold_fast,hold_reset_int; //Flags fuer Hold Regler |
||
62 | static uint8_t *ptr_payload_data; |
||
63 | static uint8_t *ptr_pac_status; |
||
64 | long int dist_flown; |
||
143 | salvo | 65 | |
156 | salvo | 66 | short int Get_GPS_data(void); |
143 | salvo | 67 | |
68 | NAV_POSUTM_t actual_pos; // Aktuelle Nav Daten werden hier im ublox Format abgelegt |
||
69 | NAV_STATUS_t actual_status; // Aktueller Nav Status |
||
70 | NAV_VELNED_t actual_speed; // Aktueller Geschwindigkeits und Richtungsdaten |
||
71 | |||
156 | salvo | 72 | GPS_ABS_POSITION_t gps_act_position; // Alle wichtigen Daten zusammengefasst |
73 | GPS_ABS_POSITION_t gps_home_position; // Die Startposition, beim Kalibrieren ermittelt |
||
74 | GPS_REL_POSITION_t gps_rel_act_position; // Die aktuelle relative Position bezogen auf Home Position |
||
158 | salvo | 75 | GPS_REL_POSITION_t gps_rel_hold_position; // Die gespeicherte Sollposition fuer GPS_ Hold Mode |
258 | salvo | 76 | GPS_REL_POSITION_t gps_rel_start_position; // Die gespeicherte Ausgangsposition fuer GPS_ Home Mode |
143 | salvo | 77 | |
156 | salvo | 78 | // Initialisierung |
79 | void GPS_Neutral(void) |
||
1 | ingob | 80 | { |
158 | salvo | 81 | ublox_msg_state = UBLOX_IDLE; |
82 | gps_state = GPS_CRTL_IDLE; |
||
266 | salvo | 83 | gps_sub_state = GPS_CRTL_IDLE; |
158 | salvo | 84 | actual_pos.status = 0; |
85 | actual_speed.status = 0; |
||
86 | actual_status.status = 0; |
||
87 | gps_home_position.status = 0; // Noch keine gueltige Home Position |
||
88 | gps_act_position.status = 0; |
||
89 | gps_rel_act_position.status = 0; |
||
90 | GPS_Nick = 0; |
||
91 | GPS_Roll = 0; |
||
92 | gps_updte_flag = 0; |
||
159 | salvo | 93 | gps_int_x = 0; |
94 | gps_int_y = 0; |
||
190 | salvo | 95 | gps_alive_cnt = 0; |
1 | ingob | 96 | } |
97 | |||
156 | salvo | 98 | // Home Position sichern falls Daten verfuegbar sind. |
99 | void GPS_Save_Home(void) |
||
1 | ingob | 100 | { |
156 | salvo | 101 | short int n; |
102 | n = Get_GPS_data(); |
||
103 | if (n == 0) // Gueltige und aktuelle Daten ? |
||
104 | { |
||
105 | // Neue GPS Daten liegen vor |
||
157 | salvo | 106 | gps_home_position.utm_east = gps_act_position.utm_east; |
107 | gps_home_position.utm_north = gps_act_position.utm_north; |
||
108 | gps_home_position.utm_alt = gps_act_position.utm_alt; |
||
109 | gps_home_position.status = 1; // Home Position gueltig |
||
156 | salvo | 110 | } |
111 | } |
||
112 | |||
113 | // Relative Position zur Home Position bestimmen |
||
114 | // Rueckgabewert 0= Daten sind aktuell und gueltig. 1= Keine Aenderung. 2= Daten ungueltig |
||
115 | short int Get_Rel_Position(void) |
||
116 | { |
||
117 | short int n = 0; |
||
118 | n = Get_GPS_data(); |
||
119 | if (n >=1) return (n); // nix zu tun, weil keine neue Daten da sind |
||
224 | salvo | 120 | if (gps_alive_cnt < 400) gps_alive_cnt += 300; // Timeoutzaehler. Wird in Motorregler Routine ueberwacht und dekrementiert |
156 | salvo | 121 | if (gps_home_position.status > 0) //Nur wenn Home Position vorliegt |
122 | { |
||
123 | gps_rel_act_position.utm_east = (int) (gps_act_position.utm_east - gps_home_position.utm_east); |
||
124 | gps_rel_act_position.utm_north = (int) (gps_act_position.utm_north - gps_home_position.utm_north); |
||
125 | gps_rel_act_position.status = 1; // gueltige Positionsdaten |
||
126 | n = 0; |
||
158 | salvo | 127 | gps_updte_flag = 1; // zeigt an, dass neue Daten vorliegen. |
156 | salvo | 128 | } |
129 | else |
||
130 | { |
||
131 | n = 2; //keine gueltigen Daten vorhanden |
||
132 | gps_rel_act_position.status = 0; //keine gueltige Position weil keine home Position da ist. |
||
133 | } |
||
134 | return (n); |
||
135 | } |
||
136 | |||
137 | // Daten aus aktuellen ublox Messages extrahieren |
||
138 | // Rueckgabewert 0= Daten sind aktuell und gueltig. 1= Keine Aenderung. 2= Daten ungueltig |
||
139 | short int Get_GPS_data(void) |
||
140 | { |
||
141 | short int n = 1; |
||
142 | |||
143 | if (actual_pos.status == 0) return (1); //damit es schnell geht, wenn nix zu tun ist |
||
143 | salvo | 144 | if ((actual_pos.status > 0) && (actual_status.status > 0) && (actual_speed.status > 0)) |
145 | { |
||
149 | salvo | 146 | if (((actual_status.gpsfix_type & 0x03) >=2) && ((actual_status.nav_status_flag & 0x01) >=1)) // nur wenn Daten aktuell und gueltig sind |
143 | salvo | 147 | { |
148 | gps_act_position.utm_east = actual_pos.utm_east/10; |
||
149 | gps_act_position.utm_north = actual_pos.utm_north/10; |
||
150 | gps_act_position.utm_alt = actual_pos.utm_alt/10; |
||
151 | gps_act_position.speed_gnd = actual_speed.speed_gnd/10; |
||
152 | gps_act_position.speed_gnd = actual_speed.speed_gnd/10; |
||
153 | gps_act_position.heading = actual_speed.heading/100000; |
||
154 | gps_act_position.status = 1; |
||
156 | salvo | 155 | n = 0; //Daten gueltig |
143 | salvo | 156 | } |
156 | salvo | 157 | else |
158 | { |
||
159 | gps_act_position.status = 0; //Keine gueltigen Daten |
||
160 | n = 2; |
||
161 | } |
||
162 | actual_pos.status = 0; //neue ublox Messages anfordern |
||
163 | actual_status.status = 0; |
||
164 | actual_speed.status = 0; |
||
165 | } |
||
166 | return (n); |
||
1 | ingob | 167 | } |
168 | |||
143 | salvo | 169 | /* |
170 | Daten vom GPS im ublox MSG Format auswerten |
||
156 | salvo | 171 | Die Routine wird bei jedem Empfang eines Zeichens vom GPS Modul durch den UART IRQ aufgerufen |
143 | salvo | 172 | // Die UBX Messages NAV_POSUTM, NAV_STATUS und NAV_VALED muessen aktiviert sein |
173 | */ |
||
174 | void Get_Ublox_Msg(uint8_t rx) |
||
175 | { |
||
176 | switch (ublox_msg_state) |
||
177 | { |
||
1 | ingob | 178 | |
143 | salvo | 179 | case UBLOX_IDLE: // Zuerst Synchcharacters pruefen |
180 | if ( rx == UBLOX_SYNCH1_CHAR ) ublox_msg_state = UBLOX_SYNC1; |
||
181 | else ublox_msg_state = UBLOX_IDLE; |
||
182 | break; |
||
183 | |||
184 | case UBLOX_SYNC1: |
||
185 | |||
186 | if (rx == UBLOX_SYNCH2_CHAR) ublox_msg_state = UBLOX_SYNC2; |
||
187 | else ublox_msg_state = UBLOX_IDLE; |
||
188 | chk_a = 0,chk_b = 0; |
||
189 | break; |
||
190 | |||
191 | case UBLOX_SYNC2: |
||
192 | if (rx == UBLOX_NAV_CLASS) ublox_msg_state = UBLOX_CLASS; |
||
193 | else ublox_msg_state = UBLOX_IDLE; |
||
194 | break; |
||
195 | |||
196 | case UBLOX_CLASS: // Nur NAV Meldungen auswerten |
||
197 | switch (rx) |
||
198 | { |
||
199 | case UBLOX_NAV_POSUTM: |
||
200 | ptr_pac_status = &actual_pos.status; |
||
201 | if (*ptr_pac_status > 0) ublox_msg_state = UBLOX_IDLE; //Abbruch weil Daten noch nicht verwendet wurden |
||
202 | else |
||
203 | { |
||
204 | ptr_payload_data = &actual_pos; |
||
205 | ptr_payload_data_end = &actual_pos.status; |
||
206 | ublox_msg_state = UBLOX_LEN1; |
||
207 | } |
||
208 | break; |
||
209 | |||
210 | case UBLOX_NAV_STATUS: |
||
211 | ptr_pac_status = &actual_status.status; |
||
212 | if (*ptr_pac_status > 0) ublox_msg_state = UBLOX_IDLE; |
||
213 | else |
||
214 | { |
||
215 | ptr_payload_data = &actual_status; |
||
216 | ptr_payload_data_end = &actual_status.status; |
||
217 | ublox_msg_state = UBLOX_LEN1; |
||
218 | } |
||
219 | break; |
||
220 | |||
221 | case UBLOX_NAV_VELED: |
||
156 | salvo | 222 | ptr_pac_status = &actual_speed.status; |
143 | salvo | 223 | if (*ptr_pac_status > 0) ublox_msg_state = UBLOX_IDLE; |
224 | else |
||
225 | { |
||
226 | ptr_payload_data = &actual_speed; |
||
227 | ptr_payload_data_end = &actual_speed.status; |
||
228 | ublox_msg_state = UBLOX_LEN1; |
||
229 | } |
||
230 | break; |
||
231 | |||
232 | default: |
||
233 | ublox_msg_state = UBLOX_IDLE; |
||
234 | break; |
||
235 | } |
||
236 | chk_a = UBLOX_NAV_CLASS + rx; |
||
237 | chk_b = UBLOX_NAV_CLASS + chk_a; |
||
238 | break; |
||
239 | |||
240 | case UBLOX_LEN1: // Laenge auswerten |
||
241 | rx_len = rx; |
||
242 | chk_a += rx; |
||
243 | chk_b += chk_a; |
||
244 | ublox_msg_state = UBLOX_LEN2; |
||
245 | break; |
||
246 | |||
247 | |||
248 | case UBLOX_LEN2: // Laenge auswerten |
||
249 | rx_len = rx_len + (rx *256); // Laenge ermitteln |
||
250 | chk_a += rx; |
||
251 | chk_b += chk_a; |
||
252 | ublox_msg_state = UBLOX_PAYLOAD; |
||
253 | break; |
||
254 | |||
255 | case UBLOX_PAYLOAD: // jetzt Nutzdaten einlesen |
||
256 | if (rx_len > 0) |
||
257 | { |
||
258 | *ptr_payload_data = rx; |
||
259 | chk_a += rx; |
||
260 | chk_b += chk_a; |
||
261 | --rx_len; |
||
262 | if ((rx_len > 0) && (ptr_payload_data <= ptr_payload_data_end)) |
||
263 | { |
||
264 | ptr_payload_data++; |
||
156 | salvo | 265 | ublox_msg_state = UBLOX_PAYLOAD; |
143 | salvo | 266 | } |
267 | else ublox_msg_state = UBLOX_CKA; |
||
268 | } |
||
269 | else ublox_msg_state = UBLOX_IDLE; // Abbruch wegen Fehler |
||
270 | break; |
||
271 | |||
272 | case UBLOX_CKA: // Checksum pruefen |
||
273 | if (rx == chk_a) ublox_msg_state = UBLOX_CKB; |
||
274 | else ublox_msg_state = UBLOX_IDLE; // Abbruch wegen Fehler |
||
275 | break; |
||
276 | |||
277 | case UBLOX_CKB: // Checksum pruefen |
||
278 | if (rx == chk_b) *ptr_pac_status = 1; // Paket ok |
||
279 | ublox_msg_state = UBLOX_IDLE; |
||
280 | break; |
||
281 | |||
282 | default: |
||
283 | ublox_msg_state = UBLOX_IDLE; |
||
284 | break; |
||
158 | salvo | 285 | } |
143 | salvo | 286 | } |
158 | salvo | 287 | |
288 | //Zentrale Statemachine fuer alle GPS relevanten Regelungsablauefe |
||
289 | short int GPS_CRTL(short int cmd) |
||
290 | { |
||
236 | salvo | 291 | static unsigned int cnt; //Zaehler fuer diverse Verzoegerungen |
184 | salvo | 292 | static signed int int_east,int_north; //Integrierer |
293 | static signed int dist_north,dist_east; |
||
186 | salvo | 294 | static signed int diff_east,diff_north; // Differenzierer (Differenz zum vorhergehenden x bzw. y Wert) |
295 | static signed int diff_east_f,diff_north_f; // Differenzierer, gefiltert |
||
197 | salvo | 296 | signed int n,diff_v; |
236 | salvo | 297 | static signed int gps_g2t_act_v; // Aktuelle Geschwindigkeitsvorgabe fuer Home Funktion |
197 | salvo | 298 | long signed int dev,n_l; |
225 | salvo | 299 | signed int dist_frm_start_east,dist_frm_start_north; |
158 | salvo | 300 | switch (cmd) |
301 | { |
||
162 | salvo | 302 | |
303 | case GPS_CMD_REQ_HOME: // Es soll zum Startpunkt zurueckgeflogen werden. |
||
224 | salvo | 304 | if ((gps_state != GPS_CRTL_HOLD_ACTIVE) && (gps_state != GPS_CRTL_HOME_ACTIVE)) |
305 | { |
||
306 | cnt++; |
||
307 | if (cnt > 500) // erst nach Verzoegerung |
||
308 | { |
||
309 | // Erst mal initialisieren |
||
310 | cnt = 0; |
||
311 | gps_tick = 0; |
||
225 | salvo | 312 | hold_fast = 0; |
236 | salvo | 313 | hold_reset_int = 0; // Integrator enablen |
224 | salvo | 314 | int_east = 0, int_north = 0; |
315 | gps_reg_x = 0, gps_reg_y = 0; |
||
316 | dist_east = 0, dist_north = 0; |
||
317 | diff_east_f = 0, diff_north_f= 0; |
||
318 | diff_east = 0, diff_north = 0; |
||
319 | dist_flown = 0; |
||
236 | salvo | 320 | gps_g2t_act_v = 0; |
224 | salvo | 321 | gps_sub_state = GPS_CRTL_IDLE; |
322 | // aktuelle positionsdaten abspeichern |
||
323 | if (gps_rel_act_position.status > 0) |
||
324 | { |
||
325 | gps_rel_start_position.utm_east = gps_rel_act_position.utm_east; |
||
326 | gps_rel_start_position.utm_north= gps_rel_act_position.utm_north; |
||
327 | gps_rel_start_position.status = 1; // gueltige Positionsdaten |
||
328 | gps_rel_hold_position.utm_east = gps_rel_act_position.utm_east; |
||
329 | gps_rel_hold_position.utm_north = gps_rel_act_position.utm_north; |
||
330 | gps_rel_hold_position.status = 1; // gueltige Positionsdaten |
||
290 | salvo | 331 | //Richtung zur Home Position bezogen auf Nordpol bestimmen |
224 | salvo | 332 | hdng_2home = arctan_i(-gps_rel_start_position.utm_east,-gps_rel_start_position.utm_north); |
333 | // in Winkel 0...360 Grad umrechnen |
||
241 | salvo | 334 | if (( gps_rel_start_position.utm_east < 0)) hdng_2home = ( 90-hdng_2home); |
224 | salvo | 335 | else hdng_2home = (270 - hdng_2home); |
290 | salvo | 336 | dist_2home = (int) get_dist(gps_rel_start_position.utm_east,gps_rel_start_position.utm_north,hdng_2home); //Entfernung zur Home Position bestimmen |
224 | salvo | 337 | gps_state = GPS_CRTL_HOME_ACTIVE; |
338 | return (GPS_STST_OK); |
||
339 | } |
||
340 | else |
||
341 | { |
||
342 | gps_rel_start_position.status = 0; //Keine Daten verfuegbar |
||
343 | gps_state = GPS_CRTL_IDLE; |
||
344 | return(GPS_STST_ERR); // Keine Daten da |
||
345 | } |
||
346 | } |
||
347 | else return(GPS_STST_PEND); // noch warten |
||
348 | } |
||
162 | salvo | 349 | break; |
350 | // ****************************** |
||
351 | |||
158 | salvo | 352 | case GPS_CMD_REQ_HOLD: // Die Lageregelung soll aktiviert werden. |
353 | if (gps_state != GPS_CRTL_HOLD_ACTIVE) |
||
354 | { |
||
355 | cnt++; |
||
160 | salvo | 356 | if (cnt > 500) // erst nach Verzoegerung |
158 | salvo | 357 | { |
358 | cnt = 0; |
||
224 | salvo | 359 | // aktuelle positionsdaten abspeichern |
158 | salvo | 360 | if (gps_rel_act_position.status > 0) |
361 | { |
||
236 | salvo | 362 | hold_fast = 0; |
363 | hold_reset_int = 0; // Integrator enablen |
||
224 | salvo | 364 | int_east = 0, int_north = 0; |
365 | gps_reg_x = 0, gps_reg_y = 0; |
||
366 | dist_east = 0, dist_north = 0; |
||
367 | diff_east_f = 0, diff_north_f= 0; |
||
368 | diff_east = 0, diff_north = 0; |
||
158 | salvo | 369 | gps_rel_hold_position.utm_east = gps_rel_act_position.utm_east; |
370 | gps_rel_hold_position.utm_north = gps_rel_act_position.utm_north; |
||
371 | gps_rel_hold_position.status = 1; // gueltige Positionsdaten |
||
372 | gps_state = GPS_CRTL_HOLD_ACTIVE; |
||
373 | return (GPS_STST_OK); |
||
374 | } |
||
375 | else |
||
376 | { |
||
377 | gps_rel_hold_position.status = 0; //Keine Daten verfuegbar |
||
378 | gps_state = GPS_CRTL_IDLE; |
||
379 | return(GPS_STST_ERR); // Keine Daten da |
||
380 | } |
||
381 | } |
||
382 | else return(GPS_STST_PEND); // noch warten |
||
383 | } |
||
384 | break; |
||
385 | |||
162 | salvo | 386 | case GPS_CMD_STOP: // Lageregelung beenden |
190 | salvo | 387 | cnt = 0; |
388 | GPS_Nick = 0; |
||
389 | GPS_Roll = 0; |
||
390 | gps_int_x = 0; |
||
391 | gps_int_y = 0; |
||
266 | salvo | 392 | gps_sub_state = GPS_CRTL_IDLE; |
393 | gps_state = GPS_CRTL_IDLE; |
||
158 | salvo | 394 | return (GPS_STST_OK); |
395 | break; |
||
396 | |||
397 | default: |
||
398 | return (GPS_STST_ERR); |
||
399 | break; |
||
400 | } |
||
401 | |||
402 | switch (gps_state) |
||
403 | { |
||
404 | case GPS_CRTL_IDLE: |
||
405 | cnt = 0; |
||
406 | return (GPS_STST_OK); |
||
407 | break; |
||
408 | |||
224 | salvo | 409 | case GPS_CRTL_HOME_ACTIVE: // Rueckflug zur Basis |
410 | //Der Sollwert des Lagereglers wird der Homeposition angenaehert |
||
411 | if (gps_rel_start_position.status >0) |
||
412 | { |
||
413 | if ((gps_updte_flag > 0) && (gps_sub_state !=GPS_HOME_FINISHED)) // nur wenn neue GPS Daten vorliegen und nicht schon alles fertig ist |
||
414 | { |
||
415 | gps_tick++; |
||
416 | int d1,d2,d3; |
||
225 | salvo | 417 | d1 = abs (gps_rel_hold_position.utm_east - gps_rel_act_position.utm_east ); |
418 | d2 = abs (gps_rel_hold_position.utm_north - gps_rel_act_position.utm_north ); |
||
224 | salvo | 419 | d3 = (dist_2home - (int)dist_flown); // Restdistanz zum Ziel |
420 | |||
258 | salvo | 421 | if (d3 > GPS_G2T_DIST_MAX_STOP) // Schneller Rueckflug, noch weit weg vom Ziel |
224 | salvo | 422 | { |
258 | salvo | 423 | if ((d1 < GPS_G2T_FAST_TOL) && (d2 < GPS_G2T_FAST_TOL)) //nur weiter wenn Lage innerhalb der Toleranz |
225 | salvo | 424 | { |
266 | salvo | 425 | if (gps_g2t_act_v < GPS_G2T_V_MAX) gps_g2t_act_v++; //Geschwindigkeit langsam erhoehen |
290 | salvo | 426 | dist_flown +=(long)gps_g2t_act_v; // Vorgabe der Strecke anhand der Geschwindigkeit |
427 | gps_sub_state = GPS_HOME_FAST_IN_TOL; |
||
224 | salvo | 428 | } |
236 | salvo | 429 | else //Den Lageregler in Ruhe arbeiten lassen weil ausserhalb der Toleranz |
430 | { |
||
258 | salvo | 431 | if (gps_g2t_act_v > 1) gps_g2t_act_v--; // Geschwindigkeit reduzieren |
266 | salvo | 432 | dist_flown++; //Auch ausserhalb der Toleranz langsam erhoehen |
241 | salvo | 433 | gps_sub_state = GPS_HOME_FAST_OUTOF_TOL; |
236 | salvo | 434 | } |
266 | salvo | 435 | hold_fast = 1; // Regler fuer schnellen Flug |
436 | hold_reset_int = 1; // Integrator ausschalten |
||
437 | dist_frm_start_east = (int)((dist_flown * (long)sin_i(hdng_2home))/1000); |
||
438 | dist_frm_start_north = (int)((dist_flown * (long)cos_i(hdng_2home))/1000); |
||
439 | gps_rel_hold_position.utm_east = gps_rel_start_position.utm_east + dist_frm_start_east; //naechster Zielpunkt |
||
440 | gps_rel_hold_position.utm_north = gps_rel_start_position.utm_north + dist_frm_start_north; //naechster Zielpunkt |
||
224 | salvo | 441 | } |
258 | salvo | 442 | else if (d3 > GPS_G2T_DIST_HOLD) //Das Ziel naehert sich, deswegen abbremsen |
224 | salvo | 443 | { |
266 | salvo | 444 | if ((d1 < GPS_G2T_NRML_TOL) && (d2 < GPS_G2T_NRML_TOL)) |
224 | salvo | 445 | { |
266 | salvo | 446 | dist_flown += GPS_G2T_V_RAMP_DWN; // Vorgabe der Strecke anhand der Geschwindigkeit |
447 | gps_sub_state = GPS_HOME_RMPDWN_IN_TOL; |
||
258 | salvo | 448 | } |
449 | else |
||
450 | { |
||
266 | salvo | 451 | dist_flown++; //Auch ausserhalb der Toleranz langsam erhoehen |
258 | salvo | 452 | gps_sub_state = GPS_HOME_RMPDWN_OUTOF_TOL; |
453 | } |
||
266 | salvo | 454 | hold_fast = 0; // Wieder normal regeln |
455 | hold_reset_int = 1; // Integrator ausschalten |
||
456 | dist_frm_start_east = (int)((dist_flown * (long)sin_i(hdng_2home))/1000); |
||
457 | dist_frm_start_north = (int)((dist_flown * (long)cos_i(hdng_2home))/1000); |
||
458 | gps_rel_hold_position.utm_east = gps_rel_start_position.utm_east + dist_frm_start_east; //naechster Zielpunkt |
||
459 | gps_rel_hold_position.utm_north = gps_rel_start_position.utm_north + dist_frm_start_north; //naechster Zielpunkt |
||
258 | salvo | 460 | } |
461 | else //Soll-Ziel fast erreicht, Jetzt noch Reste ausgleichen, weil Zielpunkt nicht exakt bestimmt werden konnte (Fehler in Winkelfkt) |
||
462 | { |
||
463 | if ((d1 < GPS_G2T_NRML_TOL) && (d2 < GPS_G2T_NRML_TOL)) // Jetzt bis zum Zielpunkt regeln |
||
464 | { |
||
465 | gps_sub_state = GPS_HOME_IN_TOL; |
||
466 | hold_fast = 0; // Wieder normal regeln |
||
467 | hold_reset_int = 0; // Integrator wieder aktivieren |
||
468 | if (gps_rel_hold_position.utm_east >= GPS_G2T_V_MIN) gps_rel_hold_position.utm_east -= GPS_G2T_V_MIN; |
||
469 | else if (gps_rel_hold_position.utm_east <= -GPS_G2T_V_MIN ) gps_rel_hold_position.utm_east += GPS_G2T_V_MIN; |
||
470 | if (gps_rel_hold_position.utm_north >= GPS_G2T_V_MIN) gps_rel_hold_position.utm_north -= GPS_G2T_V_MIN; |
||
471 | else if (gps_rel_hold_position.utm_north <= - GPS_G2T_V_MIN ) gps_rel_hold_position.utm_north += GPS_G2T_V_MIN; |
||
472 | if ((abs(gps_rel_hold_position.utm_east) <= GPS_G2T_V_MIN) && (abs(gps_rel_hold_position.utm_north) <=GPS_G2T_V_MIN)) |
||
224 | salvo | 473 | { |
258 | salvo | 474 | gps_rel_hold_position.utm_east = 0; |
475 | gps_rel_hold_position.utm_north = 0; |
||
476 | gps_sub_state = GPS_HOME_FINISHED; |
||
224 | salvo | 477 | } |
258 | salvo | 478 | } |
266 | salvo | 479 | else gps_sub_state = GPS_HOME_OUTOF_TOL; |
258 | salvo | 480 | } |
224 | salvo | 481 | } |
258 | salvo | 482 | gps_state = GPS_CRTL_HOLD_ACTIVE; //Zwischensprung |
483 | return (GPS_STST_OK); |
||
224 | salvo | 484 | } |
258 | salvo | 485 | else // Keine GPS Daten verfuegbar, deswegen Abbruch |
224 | salvo | 486 | { |
258 | salvo | 487 | gps_state = GPS_CRTL_IDLE; |
224 | salvo | 488 | return (GPS_STST_ERR); |
489 | } |
||
490 | break; |
||
491 | |||
492 | |||
236 | salvo | 493 | case GPS_CRTL_HOLD_ACTIVE: // Hier werden die Daten fuer Nick und Roll errechnet |
224 | salvo | 494 | if (gps_updte_flag >0) // nur wenn neue GPS Daten vorliegen |
158 | salvo | 495 | { |
496 | gps_updte_flag = 0; |
||
497 | // ab hier wird geregelt |
||
186 | salvo | 498 | diff_east = -dist_east; //Alten Wert fuer Differenzier schon mal abziehen |
499 | diff_north = -dist_north; |
||
190 | salvo | 500 | dist_east = gps_rel_hold_position.utm_east - gps_rel_act_position.utm_east; |
184 | salvo | 501 | dist_north = gps_rel_hold_position.utm_north - gps_rel_act_position.utm_north; |
162 | salvo | 502 | int_east += dist_east; |
503 | int_north += dist_north; |
||
167 | salvo | 504 | diff_east += dist_east; // Differenz zur vorhergehenden East Position |
505 | diff_north += dist_north; // Differenz zur vorhergehenden North Position |
||
290 | salvo | 506 | |
507 | if (hold_fast > 0) // wegen Sollpositionsspruengen im Fast Mode Differenzierer daempfen |
||
508 | { |
||
509 | diff_east_f = ((diff_east_f *3)/4) + (diff_east *1/4); //Differenzierer filtern |
||
510 | diff_north_f = ((diff_north_f *3)/4) + (diff_north*1/4); //Differenzierer filtern |
||
511 | } |
||
512 | else // schwache Filterung |
||
513 | { |
||
514 | // diff_east_f = diff_east; |
||
515 | // diff_north_f = diff_north; |
||
516 | diff_east_f = ((diff_east_f *2)/4) + (diff_east *2/4); //Differenzierer filtern |
||
517 | diff_north_f = ((diff_north_f *2)/4) + (diff_north*2/4); //Differenzierer filtern |
||
518 | } |
||
519 | |||
236 | salvo | 520 | #define GPSINT_MAX 30000 //neuer Wert ab 7.10.2007 Begrenzung |
162 | salvo | 521 | if ((abs(int_east) > GPSINT_MAX) || (abs(int_north)> GPSINT_MAX)) //Bei zu hohem Wert Integrator auf Wert halten |
522 | { |
||
523 | int_east -= dist_east; |
||
524 | int_north -= dist_north; |
||
525 | } |
||
236 | salvo | 526 | if (hold_reset_int > 0) //Im Schnellen Mode Integrator abschalten |
225 | salvo | 527 | { |
528 | int_east = 0; |
||
529 | int_north = 0; |
||
530 | } |
||
531 | |||
209 | salvo | 532 | // Variable Verstarkung fuer Differenzierer ermitteln. Je weiter vom Ziel wir entfernt sind |
533 | // desto groesser wird der Faktor. Es gibt aber einen Maximalwert. Bei 0 ist die Verstaerkung immer 1 |
||
236 | salvo | 534 | signed long dist,int_east1,int_north1; |
197 | salvo | 535 | int phi; |
266 | salvo | 536 | phi = arctan_i(abs(dist_north),abs(dist_east)); |
537 | dist = get_dist(dist_east,dist_north,phi); //Zunaechst Entfernung zum Ziel ermitteln |
||
224 | salvo | 538 | |
258 | salvo | 539 | if (hold_fast == 0) // je Nach Modus andere Verstaerkungskurve fuer Differenzierer |
540 | { |
||
541 | diff_v = (int)((dist * (GPS_DIFF_NRML_MAX_V - 10)) / GPS_DIFF_NRML_MAX_D) +10; //Verstaerkung * 10 |
||
542 | if (diff_v > GPS_DIFF_NRML_MAX_V) diff_v = GPS_DIFF_NRML_MAX_V; //begrenzen |
||
543 | } |
||
544 | else |
||
545 | { |
||
546 | diff_v = (int)((dist * (GPS_DIFF_FAST_MAX_V - 10)) / GPS_DIFF_FAST_MAX_D) +10; //Verstaerkung * 10 |
||
547 | if (diff_v > GPS_DIFF_FAST_MAX_V) diff_v = GPS_DIFF_FAST_MAX_V; //begrenzen |
||
548 | } |
||
161 | salvo | 549 | |
266 | salvo | 550 | int diff_p; //Vom Modus abhaengige zusaetzliche Verstaerkung |
551 | if (hold_fast > 0) diff_p = GPS_PROP_FAST_V; |
||
552 | else diff_p = GPS_PROP_NRML_V; |
||
553 | |||
236 | salvo | 554 | //I Werte begrenzen |
555 | #define INT1_MAX (20 * GPS_V) |
||
556 | int_east1 = ((((long)int_east) * Parameter_UserParam2)/32); |
||
557 | int_north = ((((long)int_north) * Parameter_UserParam2)/32); |
||
558 | if (int_east1 > INT1_MAX) int_east1 = INT1_MAX; //begrenzen |
||
559 | else if (int_east1 < -INT1_MAX) int_east1 = -INT1_MAX; |
||
560 | if (int_north1 > INT1_MAX) int_north1 = INT1_MAX; //begrenzen |
||
561 | else if (int_north1 < -INT1_MAX) int_north1 = -INT1_MAX; |
||
562 | |||
186 | salvo | 563 | //PID Regler Werte aufsummieren |
290 | salvo | 564 | gps_reg_x = ((int)int_east1 + ((dist_east * Parameter_UserParam1 * diff_p)/(8*2))+ ((diff_east_f * diff_v * Parameter_UserParam3)/10)); // I + P +D Anteil X Achse |
565 | gps_reg_y = ((int)int_north1 + ((dist_north * Parameter_UserParam1 * diff_p)/(8*2))+ ((diff_north_f * diff_v * Parameter_UserParam3)/10)); // I + P +D Anteil Y Achse |
||
159 | salvo | 566 | |
186 | salvo | 567 | //Ziel-Richtung bezogen auf Nordpol bestimmen |
194 | salvo | 568 | GPS_hdng_abs_2trgt = arctan_i(gps_reg_x,gps_reg_y); |
159 | salvo | 569 | |
186 | salvo | 570 | // in Winkel 0...360 Grad umrechnen |
161 | salvo | 571 | if ((gps_reg_x >= 0)) GPS_hdng_abs_2trgt = ( 90-GPS_hdng_abs_2trgt); |
162 | salvo | 572 | else GPS_hdng_abs_2trgt = (270 - GPS_hdng_abs_2trgt); |
161 | salvo | 573 | |
159 | salvo | 574 | // Relative Richtung in bezug auf Nordachse des Kopters errechen |
575 | n= GyroKomp_Int/GYROKOMP_INC_GRAD_DEFAULT; |
||
576 | GPS_hdng_rel_2trgt = GPS_hdng_abs_2trgt - n; |
||
167 | salvo | 577 | if ((GPS_hdng_rel_2trgt >180) && (GPS_hdng_abs_2trgt >=180)) GPS_hdng_rel_2trgt = GPS_hdng_rel_2trgt-360; |
159 | salvo | 578 | else if (GPS_hdng_rel_2trgt >180) GPS_hdng_rel_2trgt = 360 - GPS_hdng_rel_2trgt; |
579 | else if (GPS_hdng_rel_2trgt <-180) GPS_hdng_rel_2trgt = 360 + GPS_hdng_rel_2trgt; |
||
580 | |||
184 | salvo | 581 | // Regelabweichung aus x,y zu Ziel in Distanz umrechnen |
160 | salvo | 582 | if (abs(gps_reg_x) > abs(gps_reg_y) ) |
583 | { |
||
197 | salvo | 584 | dev = (long)gps_reg_x; //Groesseren Wert wegen besserer Genauigkeit nehmen |
585 | dev = abs((dev *1000) / (long) sin_i(GPS_hdng_abs_2trgt)); |
||
160 | salvo | 586 | } |
587 | else |
||
588 | { |
||
197 | salvo | 589 | dev = (long)gps_reg_y; |
590 | dev = abs((dev *1000) / (long) cos_i(GPS_hdng_abs_2trgt)); |
||
160 | salvo | 591 | } |
197 | salvo | 592 | GPS_dist_2trgt = (int) dev; |
185 | salvo | 593 | // Winkel und Distanz in Nick und Rollgroessen umrechnen |
197 | salvo | 594 | GPS_Roll = (int) +( (dev * (long) sin_i(GPS_hdng_rel_2trgt))/1000); |
595 | GPS_Nick = (int) -( (dev * (long) cos_i(GPS_hdng_rel_2trgt))/1000); |
||
190 | salvo | 596 | |
184 | salvo | 597 | if (GPS_Roll > (GPS_NICKROLL_MAX * GPS_V)) GPS_Roll = (GPS_NICKROLL_MAX * GPS_V); |
598 | else if (GPS_Roll < -(GPS_NICKROLL_MAX * GPS_V)) GPS_Roll = -(GPS_NICKROLL_MAX * GPS_V); |
||
599 | if (GPS_Nick > (GPS_NICKROLL_MAX * GPS_V)) GPS_Nick = (GPS_NICKROLL_MAX * GPS_V); |
||
600 | else if (GPS_Nick < -(GPS_NICKROLL_MAX * GPS_V)) GPS_Nick = -(GPS_NICKROLL_MAX * GPS_V); |
||
601 | |||
602 | //Kleine Werte verstaerken, Grosse abschwaechen |
||
186 | salvo | 603 | n = sin_i((GPS_Roll*90)/(GPS_NICKROLL_MAX * GPS_V)); |
604 | n_l = ((long) GPS_NICKROLL_MAX * (long) n)/1000; |
||
605 | GPS_Roll = (int) n_l; |
||
185 | salvo | 606 | n = sin_i((GPS_Nick*90)/(GPS_NICKROLL_MAX * GPS_V)); |
186 | salvo | 607 | n_l = ((long) GPS_NICKROLL_MAX * (long) n)/1000; |
608 | GPS_Nick = (int) n_l; |
||
184 | salvo | 609 | |
610 | if ((abs(dist_east) > GPS_DIST_MAX) || (abs(dist_north) > GPS_DIST_MAX)) // bei zu grossem Abstand abbrechen |
||
611 | { |
||
612 | GPS_Roll = 0; |
||
613 | GPS_Nick = 0; |
||
614 | gps_state = GPS_CRTL_IDLE; |
||
186 | salvo | 615 | return (GPS_STST_ERR); |
616 | break; |
||
184 | salvo | 617 | } |
224 | salvo | 618 | else |
619 | { |
||
620 | if ( cmd == GPS_CMD_REQ_HOME ) gps_state = GPS_CRTL_HOME_ACTIVE; // State umsetzen |
||
621 | return (GPS_STST_OK); |
||
622 | } |
||
158 | salvo | 623 | } |
224 | salvo | 624 | else |
625 | { |
||
626 | if ( cmd == GPS_CMD_REQ_HOME ) gps_state = GPS_CRTL_HOME_ACTIVE; // State umsetzen |
||
627 | return (GPS_STST_OK); |
||
628 | } |
||
158 | salvo | 629 | break; |
630 | |||
631 | default: |
||
224 | salvo | 632 | gps_state = GPS_CRTL_IDLE; |
158 | salvo | 633 | return (GPS_STST_ERR); |
634 | break; |
||
635 | } |
||
636 | return (GPS_STST_ERR); |
||
637 | |||
638 | } |
||
639 |