Rev 1614 | Go to most recent revision | Details | Compare with Previous | Last modification | View Log | RSS feed
| Rev | Author | Line No. | Line |
|---|---|---|---|
| 1635 | - | 1 | User param 4: Throttle stick D value. |
| 2 | |||
| 1612 | dongfang | 3 | Userparam 5: Filter control. |
| 4 | bits 0-1: Gyros 1st order |
||
| 5 | bits 2-3: Gyros 2nd order |
||
| 6 | bits 4-5: GyroD (in series with 1st order) |
||
| 7 | bits 6-7: Acc. |
||
| 8 | |||
| 9 | Userparam6: Motor smoothing. |
||
| 10 | 0: No filter |
||
| 11 | 1: 50% new 50% old |
||
| 12 | 2: As H&I |
||
| 13 | 3: Reverse H&I |
||
| 14 | |||
| 1614 | dongfang | 15 | Userparam7: Yaw I factor. Default 0 (may be nasty to fly!) |
| 1612 | dongfang | 16 | |
| 17 | Userparam8: Acc integral correction Z axis limit. Default 0 (!) |
||
| 18 | |||
| 19 | |||
| 20 | Other params: |
||
| 1614 | dongfang | 21 | GyroAccFactor = 0'th order integral drift correction - acceleration sensor part as 1/1000s. |
| 22 | Default 5 (ENC-03) |
||
| 23 | GyroAccTrim = -1'th order integral drift correction - |
||
| 24 | Offset corrections are divided by this before added to offsets. Default 2. |
||
| 25 | DriftComp = Max offset correction per iteration (=per 1/2 second). |
||
| 1635 | - | 26 | This limits the value _before_ division by GyroAccTrim. Default 32 (ENC-03) |
| 1612 | dongfang | 27 | |
| 1635 | - | 28 | Rotary rate limiter flag ON = dongfang axis coupling used. OFF = H&I axis coupling |
| 1614 | dongfang | 29 | (with the modification that it does not affect the rate values). |
| 30 | If axis coupling is off: No effect. |
||
| 31 | The rotary rate limiter was removed. |