Rev 1960 | Rev 1963 | Go to most recent revision | Details | Compare with Previous | Last modification | View Log | RSS feed
Rev | Author | Line No. | Line |
---|---|---|---|
1612 | dongfang | 1 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
2 | // + Copyright (c) 04.2007 Holger Buss |
||
3 | // + Nur für den privaten Gebrauch |
||
4 | // + www.MikroKopter.com |
||
5 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
6 | // + Es gilt für das gesamte Projekt (Hardware, Software, Binärfiles, Sourcecode und Dokumentation), |
||
7 | // + dass eine Nutzung (auch auszugsweise) nur für den privaten (nicht-kommerziellen) Gebrauch zulässig ist. |
||
8 | // + Sollten direkte oder indirekte kommerzielle Absichten verfolgt werden, ist mit uns (info@mikrokopter.de) Kontakt |
||
9 | // + bzgl. der Nutzungsbedingungen aufzunehmen. |
||
10 | // + Eine kommerzielle Nutzung ist z.B.Verkauf von MikroKoptern, Bestückung und Verkauf von Platinen oder Bausätzen, |
||
11 | // + Verkauf von Luftbildaufnahmen, usw. |
||
12 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
13 | // + Werden Teile des Quellcodes (mit oder ohne Modifikation) weiterverwendet oder veröffentlicht, |
||
14 | // + unterliegen sie auch diesen Nutzungsbedingungen und diese Nutzungsbedingungen incl. Copyright müssen dann beiliegen |
||
15 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
16 | // + Sollte die Software (auch auszugesweise) oder sonstige Informationen des MikroKopter-Projekts |
||
17 | // + auf anderen Webseiten oder sonstigen Medien veröffentlicht werden, muss unsere Webseite "http://www.mikrokopter.de" |
||
18 | // + eindeutig als Ursprung verlinkt werden |
||
19 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
20 | // + Keine Gewähr auf Fehlerfreiheit, Vollständigkeit oder Funktion |
||
21 | // + Benutzung auf eigene Gefahr |
||
22 | // + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden |
||
23 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
24 | // + Die Portierung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur |
||
25 | // + mit unserer Zustimmung zulässig |
||
26 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
27 | // + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen |
||
28 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
29 | // + Redistributions of source code (with or without modifications) must retain the above copyright notice, |
||
30 | // + this list of conditions and the following disclaimer. |
||
31 | // + * Neither the name of the copyright holders nor the names of contributors may be used to endorse or promote products derived |
||
32 | // + from this software without specific prior written permission. |
||
33 | // + * The use of this project (hardware, software, binary files, sources and documentation) is only permittet |
||
34 | // + for non-commercial use (directly or indirectly) |
||
1868 | - | 35 | // + Commercial use (for example: selling of MikroKopters, selling of PCBs, assembly, ...) is only permitted |
1612 | dongfang | 36 | // + with our written permission |
37 | // + * If sources or documentations are redistributet on other webpages, out webpage (http://www.MikroKopter.de) must be |
||
38 | // + clearly linked as origin |
||
39 | // + * porting to systems other than hardware from www.mikrokopter.de is not allowed |
||
40 | // + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
||
41 | // + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
||
42 | // + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
||
43 | // + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
||
44 | // + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
||
45 | // + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
||
46 | // + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
||
47 | // + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN// + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
||
48 | // + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
||
49 | // + POSSIBILITY OF SUCH DAMAGE. |
||
50 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
51 | #include <stdlib.h> |
||
52 | #include <avr/io.h> |
||
53 | #include <avr/interrupt.h> |
||
54 | |||
55 | #include "rc.h" |
||
1775 | - | 56 | #include "uart0.h" |
1612 | dongfang | 57 | #include "controlMixer.h" |
58 | #include "configuration.h" |
||
1775 | - | 59 | #include "commands.h" |
1612 | dongfang | 60 | |
61 | // The channel array is 1-based. The 0th entry is not used. |
||
62 | volatile int16_t PPM_in[MAX_CHANNELS]; |
||
63 | volatile int16_t PPM_diff[MAX_CHANNELS]; |
||
64 | volatile uint8_t NewPpmData = 1; |
||
65 | volatile int16_t RC_Quality = 0; |
||
66 | int16_t RC_PRTY[4]; |
||
1821 | - | 67 | uint8_t lastRCCommand = COMMAND_NONE; |
1775 | - | 68 | uint8_t commandTimer = 0; |
1612 | dongfang | 69 | |
1775 | - | 70 | // Useless. Just trim on the R/C instead. |
71 | // int16_t stickOffsetPitch = 0, stickOffsetRoll = 0; |
||
1612 | dongfang | 72 | |
73 | /*************************************************************** |
||
74 | * 16bit timer 1 is used to decode the PPM-Signal |
||
75 | ***************************************************************/ |
||
1821 | - | 76 | void RC_Init(void) { |
1872 | - | 77 | uint8_t sreg = SREG; |
1612 | dongfang | 78 | |
1872 | - | 79 | // disable all interrupts before reconfiguration |
80 | cli(); |
||
1612 | dongfang | 81 | |
1872 | - | 82 | // PPM-signal is connected to the Input Capture Pin (PD6) of timer 1 |
1962 | - | 83 | DDRD &= ~(1<<1DDD6); |
84 | PORTD |= (1<<1PORTD6); |
||
1612 | dongfang | 85 | |
1872 | - | 86 | // Channel 5,6,7 is decoded to servo signals at pin PD5 (J3), PD4(J4), PD3(J5) |
87 | // set as output |
||
1962 | - | 88 | DDRD |= (1<<DDD5) | (1<<DDD4) | (1<<DDD3); |
1872 | - | 89 | // low level |
1962 | - | 90 | PORTD &= ~((1<<PORTD5) | (1<<PORTD4) | (1<<PORTD3)); |
1612 | dongfang | 91 | |
1872 | - | 92 | // PD3 can't be used if 2nd UART is activated |
93 | // because TXD1 is at that port |
||
94 | if (CPUType != ATMEGA644P) { |
||
1962 | - | 95 | DDRD |= (1<<PORTD3); |
96 | PORTD &= ~(1<<PORTD3); |
||
1872 | - | 97 | } |
1612 | dongfang | 98 | |
1872 | - | 99 | // Timer/Counter1 Control Register A, B, C |
1612 | dongfang | 100 | |
1872 | - | 101 | // Normal Mode (bits: WGM13=0, WGM12=0, WGM11=0, WGM10=0) |
102 | // Compare output pin A & B is disabled (bits: COM1A1=0, COM1A0=0, COM1B1=0, COM1B0=0) |
||
103 | // Set clock source to SYSCLK/64 (bit: CS12=0, CS11=1, CS10=1) |
||
104 | // Enable input capture noise cancler (bit: ICNC1=1) |
||
105 | // Trigger on positive edge of the input capture pin (bit: ICES1=1), |
||
106 | // Therefore the counter incremets at a clock of 20 MHz/64 = 312.5 kHz or 3.2µs |
||
107 | // The longest period is 0xFFFF / 312.5 kHz = 0.209712 s. |
||
108 | TCCR1A &= ~((1 << COM1A1) | (1 << COM1A0) | (1 << COM1B1) | (1 << COM1B0) |
||
109 | | (1 << WGM11) | (1 << WGM10)); |
||
110 | TCCR1B &= ~((1 << WGM13) | (1 << WGM12) | (1 << CS12)); |
||
111 | TCCR1B |= (1 << CS11) | (1 << CS10) | (1 << ICES1) | (1 << ICNC1); |
||
112 | TCCR1C &= ~((1 << FOC1A) | (1 << FOC1B)); |
||
1612 | dongfang | 113 | |
1872 | - | 114 | // Timer/Counter1 Interrupt Mask Register |
1612 | dongfang | 115 | |
1872 | - | 116 | // Enable Input Capture Interrupt (bit: ICIE1=1) |
117 | // Disable Output Compare A & B Match Interrupts (bit: OCIE1B=0, OICIE1A=0) |
||
118 | // Enable Overflow Interrupt (bit: TOIE1=0) |
||
1962 | - | 119 | TIMSK1 &= ~((1<<OCIE1B) | (1<<OCIE1A) | (1<<TOIE1)); |
120 | TIMSK1 |= (1<<ICIE1); |
||
1612 | dongfang | 121 | |
1872 | - | 122 | RC_Quality = 0; |
1612 | dongfang | 123 | |
1872 | - | 124 | SREG = sreg; |
1612 | dongfang | 125 | } |
126 | |||
127 | /********************************************************************/ |
||
128 | /* Every time a positive edge is detected at PD6 */ |
||
129 | /********************************************************************/ |
||
130 | /* t-Frame |
||
1821 | - | 131 | <-----------------------------------------------------------------------> |
1872 | - | 132 | ____ ______ _____ ________ ______ sync gap ____ |
133 | | | | | | | | | | | | |
||
134 | | | | | | | | | | | | |
||
135 | ___| |_| |_| |_| |_.............| |________________| |
||
136 | <-----><-------><------><--------> <------> <--- |
||
1821 | - | 137 | t0 t1 t2 t4 tn t0 |
1962 | - | 138 | |
139 | The PPM-Frame length is 22.5 ms. |
||
140 | Channel high pulse width range is 0.7 ms to 1.7 ms completed by an 0.3 ms low pulse. |
||
141 | The mininimum time delay of two events coding a channel is ( 0.7 + 0.3) ms = 1 ms. |
||
142 | The maximum time delay of two events coding a channel is ( 1.7 + 0.3) ms = 2 ms. |
||
143 | The minimum duration of all channels at minimum value is 8 * 1 ms = 8 ms. |
||
144 | The maximum duration of all channels at maximum value is 8 * 2 ms = 16 ms. |
||
145 | The remaining time of (22.5 - 8 ms) ms = 14.5 ms to (22.5 - 16 ms) ms = 6.5 ms is |
||
146 | the syncronization gap. |
||
147 | */ |
||
148 | ISR(TIMER1_CAPT_vect) |
||
149 | { // typical rate of 1 ms to 2 ms |
||
150 | int16_t signal = 0, tmp; |
||
151 | static int16_t index; |
||
152 | static uint16_t oldICR1 = 0; |
||
153 | |||
154 | // 16bit Input Capture Register ICR1 contains the timer value TCNT1 |
||
155 | // at the time the edge was detected |
||
156 | |||
157 | // calculate the time delay to the previous event time which is stored in oldICR1 |
||
158 | // calculatiing the difference of the two uint16_t and converting the result to an int16_t |
||
159 | // implicit handles a timer overflow 65535 -> 0 the right way. |
||
160 | signal = (uint16_t) ICR1 - oldICR1; |
||
161 | oldICR1 = ICR1; |
||
162 | |||
163 | //sync gap? (3.52 ms < signal < 25.6 ms) |
||
164 | if ((signal > 1100) && (signal < 8000)) { |
||
165 | // if a sync gap happens and there where at least 4 channels decoded before |
||
166 | // then the NewPpmData flag is reset indicating valid data in the PPM_in[] array. |
||
167 | if (index >= 4) { |
||
168 | NewPpmData = 0; // Null means NewData for the first 4 channels |
||
169 | } |
||
170 | // synchronize channel index |
||
171 | index = 1; |
||
172 | } else { // within the PPM frame |
||
173 | if (index < MAX_CHANNELS - 1) { // PPM24 supports 12 channels |
||
174 | // check for valid signal length (0.8 ms < signal < 2.1984 ms) |
||
175 | // signal range is from 1.0ms/3.2us = 312 to 2.0ms/3.2us = 625 |
||
176 | if ((signal > 250) && (signal < 687)) { |
||
177 | // shift signal to zero symmetric range -154 to 159 |
||
178 | signal -= 470; // offset of 1.4912 ms ??? (469 * 3.2µs = 1.5008 ms) |
||
179 | // check for stable signal |
||
180 | if (abs(signal - PPM_in[index]) < 6) { |
||
181 | if (RC_Quality < 200) |
||
182 | RC_Quality += 10; |
||
183 | else |
||
184 | RC_Quality = 200; |
||
185 | } |
||
186 | // If signal is the same as before +/- 1, just keep it there. |
||
187 | if (signal >= PPM_in[index] - 1 && signal <= PPM_in[index] + 1) { |
||
188 | // In addition, if the signal is very close to 0, just set it to 0. |
||
189 | if (signal >= -1 && signal <= 1) { |
||
190 | tmp = 0; |
||
191 | } else { |
||
192 | tmp = PPM_in[index]; |
||
193 | } |
||
194 | } else |
||
195 | tmp = signal; |
||
196 | // calculate signal difference on good signal level |
||
197 | if (RC_Quality >= 195) |
||
198 | PPM_diff[index] = ((tmp - PPM_in[index]) / 3) * 3; // cut off lower 3 bit for nois reduction |
||
199 | else |
||
200 | PPM_diff[index] = 0; |
||
201 | PPM_in[index] = tmp; // update channel value |
||
202 | } |
||
203 | index++; // next channel |
||
204 | // demux sum signal for channels 5 to 7 to J3, J4, J5 |
||
205 | // TODO: General configurability of this R/C channel forwarding. Or remove it completely - the |
||
206 | // channels are usually available at the receiver anyway. |
||
207 | // if(index == 5) J3HIGH; else J3LOW; |
||
208 | // if(index == 6) J4HIGH; else J4LOW; |
||
209 | // if(CPUType != ATMEGA644P) // not used as TXD1 |
||
210 | // { |
||
211 | // if(index == 7) J5HIGH; else J5LOW; |
||
212 | // } |
||
213 | } |
||
214 | } |
||
215 | } |
||
216 | |||
217 | #define RCChannel(dimension) PPM_in[channelMap.channels[dimension]] |
||
218 | #define RCDiff(dimension) PPM_diff[channelMap.channels[dimension]] |
||
219 | #define COMMAND_THRESHOLD 85 |
||
220 | #define COMMAND_CHANNEL_VERTICAL CH_THROTTLE |
||
221 | #define COMMAND_CHANNEL_HORIZONTAL CH_YAW |
||
222 | |||
223 | // Internal. |
||
224 | uint8_t RC_getStickCommand(void) { |
||
225 | if (RCChannel(COMMAND_CHANNEL_VERTICAL) > COMMAND_THRESHOLD) { |
||
226 | // vertical is up |
||
227 | if (RCChannel(COMMAND_CHANNEL_HORIZONTAL) > COMMAND_THRESHOLD) |
||
228 | return COMMAND_GYROCAL; |
||
229 | if (RCChannel(COMMAND_CHANNEL_HORIZONTAL) < -COMMAND_THRESHOLD) |
||
230 | return COMMAND_ACCCAL; |
||
231 | return COMMAND_NONE; |
||
232 | } else if (RCChannel(COMMAND_CHANNEL_VERTICAL) < -COMMAND_THRESHOLD) { |
||
233 | // vertical is down |
||
234 | if (RCChannel(COMMAND_CHANNEL_HORIZONTAL) > COMMAND_THRESHOLD) |
||
235 | return COMMAND_STOP; |
||
236 | if (RCChannel(COMMAND_CHANNEL_HORIZONTAL) < -COMMAND_THRESHOLD) |
||
237 | return COMMAND_START; |
||
238 | return COMMAND_NONE; |
||
239 | } |
||
240 | // vertical is around center |
||
241 | return COMMAND_NONE; |
||
242 | } |
||
243 | |||
244 | /* |
||
245 | * This must be called (as the only thing) for each control loop cycle (488 Hz). |
||
246 | */ |
||
247 | void RC_update() { |
||
248 | int16_t tmp1, tmp2; |
||
249 | if (RC_Quality) { |
||
250 | RC_Quality--; |
||
251 | if (NewPpmData-- == 0) { |
||
252 | RC_PRTY[CONTROL_PITCH] = RCChannel(CH_PITCH) * staticParams.stickP |
||
253 | + RCDiff(CH_PITCH) * staticParams.stickD; |
||
254 | RC_PRTY[CONTROL_ROLL] = RCChannel(CH_ROLL) * staticParams.stickP |
||
255 | + RCDiff(CH_ROLL) * staticParams.stickD; |
||
256 | RC_PRTY[CONTROL_THROTTLE] = RCChannel(CH_THROTTLE) + RCDiff(CH_THROTTLE) |
||
257 | * staticParams.stickThrottleD + 120; |
||
258 | if (RC_PRTY[CONTROL_THROTTLE] < 0) |
||
259 | RC_PRTY[CONTROL_THROTTLE] = 0; // Throttle is non negative. |
||
260 | tmp1 = -RCChannel(CH_YAW) - RCDiff(CH_YAW); |
||
261 | // exponential stick sensitivity in yawing rate |
||
262 | tmp2 = (int32_t) staticParams.stickYawP * ((int32_t) tmp1 * abs(tmp1)) |
||
263 | / 512L; // expo y = ax + bx^2 |
||
264 | tmp2 += (staticParams.stickYawP * tmp1) >> 2; |
||
265 | RC_PRTY[CONTROL_YAW] = tmp2; |
||
266 | } |
||
267 | uint8_t command = RC_getStickCommand(); |
||
268 | |||
269 | if (lastRCCommand == command) { |
||
270 | // Keep timer from overrunning. |
||
271 | if (commandTimer < COMMAND_TIMER) |
||
272 | commandTimer++; |
||
273 | } else { |
||
274 | // There was a change. |
||
275 | lastRCCommand = command; |
||
276 | commandTimer = 0; |
||
277 | } |
||
278 | } else { // Bad signal |
||
279 | RC_PRTY[CONTROL_PITCH] = RC_PRTY[CONTROL_ROLL] = RC_PRTY[CONTROL_THROTTLE] |
||
280 | = RC_PRTY[CONTROL_YAW] = 0; |
||
281 | } |
||
282 | } |
||
283 | |||
284 | /* |
||
285 | * Get Pitch, Roll, Throttle, Yaw values |
||
286 | */ |
||
287 | int16_t* RC_getPRTY(void) { |
||
288 | return RC_PRTY; |
||
289 | } |
||
290 | |||
291 | /* |
||
292 | * Get other channel value |
||
293 | */ |
||
294 | int16_t RC_getVariable(uint8_t varNum) { |
||
295 | if (varNum < 4) |
||
296 | // 0th variable is 5th channel (1-based) etc. |
||
297 | return RCChannel(varNum + 4) + POT_OFFSET; |
||
298 | /* |
||
299 | * Let's just say: |
||
300 | * The RC variable 4 is hardwired to channel 5 |
||
301 | * The RC variable 5 is hardwired to channel 6 |
||
302 | * The RC variable 6 is hardwired to channel 7 |
||
303 | * The RC variable 7 is hardwired to channel 8 |
||
304 | * Alternatively, one could bind them to channel (4 + varNum) - or whatever... |
||
305 | */ |
||
306 | return PPM_in[varNum + 1] + POT_OFFSET; |
||
307 | } |
||
308 | |||
309 | uint8_t RC_getSignalQuality(void) { |
||
310 | if (RC_Quality >= 160) |
||
311 | return SIGNAL_GOOD; |
||
312 | if (RC_Quality >= 140) |
||
313 | return SIGNAL_OK; |
||
314 | if (RC_Quality >= 120) |
||
315 | return SIGNAL_BAD; |
||
316 | return SIGNAL_LOST; |
||
317 | } |
||
318 | |||
319 | /* |
||
320 | * To should fired only when the right stick is in the center position. |
||
321 | * This will cause the value of pitch and roll stick to be adjusted |
||
322 | * to zero (not just to near zero, as per the assumption in rc.c |
||
323 | * about the rc signal. I had values about 50..70 with a Futaba |
||
324 | * R617 receiver.) This calibration is not strictly necessary, but |
||
325 | * for control logic that depends on the exact (non)center position |
||
326 | * of a stick, it may be useful. |
||
327 | */ |
||
328 | void RC_calibrate(void) { |
||
329 | // Do nothing. |
||
330 | } |
||
331 | |||
332 | /* |
||
333 | if (staticParams.GlobalConfig & CFG_HEADING_HOLD) { |
||
334 | // In HH, it s OK to trim the R/C. The effect should not be conteracted here. |
||
335 | stickOffsetPitch = stickOffsetRoll = 0; |
||
336 | } else { |
||
337 | stickOffsetPitch = RCChannel(CH_PITCH) * staticParams.StickP; |
||
338 | stickOffsetRoll = RCChannel(CH_ROLL) * staticParams.StickP; |
||
339 | } |
||
340 | } |
||
341 | */ |
||
342 | |||
343 | uint8_t RC_getCommand(void) { |
||
344 | if (commandTimer == COMMAND_TIMER) { |
||
345 | // Stick has been held long enough; command committed. |
||
346 | return lastRCCommand; |
||
347 | } |
||
348 | // Not yet sure what the command is. |
||
349 | return COMMAND_NONE; |
||
350 | } |
||
351 | |||
352 | /* |
||
353 | * Command arguments on R/C: |
||
354 | * 2--3--4 |
||
355 | * | | + |
||
356 | * 1 0 5 ^ 0 |
||
357 | * | | | |
||
358 | * 8--7--6 |
||
359 | * |
||
360 | * + <-- |
||
361 | * 0 |
||
362 | * |
||
363 | * Not in any of these positions: 0 |
||
364 | */ |
||
365 | |||
366 | #define ARGUMENT_THRESHOLD 70 |
||
367 | #define ARGUMENT_CHANNEL_VERTICAL CH_PITCH |
||
368 | #define ARGUMENT_CHANNEL_HORIZONTAL CH_ROLL |
||
369 | |||
370 | uint8_t RC_getArgument(void) { |
||
371 | if (RCChannel(ARGUMENT_CHANNEL_VERTICAL) > ARGUMENT_THRESHOLD) { |
||
372 | // vertical is up |
||
373 | if (RCChannel(ARGUMENT_CHANNEL_HORIZONTAL) > ARGUMENT_THRESHOLD) |
||
374 | return 2; |
||
375 | if (RCChannel(ARGUMENT_CHANNEL_HORIZONTAL) < -ARGUMENT_THRESHOLD) |
||
376 | return 4; |
||
377 | return 3; |
||
378 | } else if (RCChannel(ARGUMENT_CHANNEL_VERTICAL) < -ARGUMENT_THRESHOLD) { |
||
379 | // vertical is down |
||
380 | if (RCChannel(ARGUMENT_CHANNEL_HORIZONTAL) > ARGUMENT_THRESHOLD) |
||
381 | return 8; |
||
382 | if (RCChannel(ARGUMENT_CHANNEL_HORIZONTAL) < -ARGUMENT_THRESHOLD) |
||
383 | return 6; |
||
384 | return 7; |
||
385 | } else { |
||
386 | // vertical is around center |
||
387 | if (RCChannel(ARGUMENT_CHANNEL_HORIZONTAL) > ARGUMENT_THRESHOLD) |
||
388 | return 1; |
||
389 | if (RCChannel(ARGUMENT_CHANNEL_HORIZONTAL) < -ARGUMENT_THRESHOLD) |
||
390 | return 5; |
||
391 | return 0; |
||
392 | } |
||
393 | } |
||
394 | |||
395 | /* |
||
396 | uint8_t RC_getLooping(uint8_t looping) { |
||
397 | // static uint8_t looping = 0; |
||
398 | |||
399 | if (RCChannel(CH_ROLL) > staticParams.LoopThreshold && staticParams.BitConfig |
||
400 | & CFG_LOOP_LEFT) { |
||
401 | looping |= (LOOPING_ROLL_AXIS | LOOPING_LEFT); |
||
402 | } else if ((looping & LOOPING_LEFT) && RCChannel(CH_ROLL) |
||
403 | < staticParams.LoopThreshold - staticParams.LoopHysteresis) { |
||
404 | looping &= (~(LOOPING_ROLL_AXIS | LOOPING_LEFT)); |
||
405 | } |
||
406 | |||
407 | if (RCChannel(CH_ROLL) < -staticParams.LoopThreshold |
||
408 | && staticParams.BitConfig & CFG_LOOP_RIGHT) { |
||
409 | looping |= (LOOPING_ROLL_AXIS | LOOPING_RIGHT); |
||
410 | } else if ((looping & LOOPING_RIGHT) && RCChannel(CH_ROLL) |
||
411 | > -staticParams.LoopThreshold - staticParams.LoopHysteresis) { |
||
412 | looping &= (~(LOOPING_ROLL_AXIS | LOOPING_RIGHT)); |
||
413 | } |
||
414 | |||
415 | if (RCChannel(CH_PITCH) > staticParams.LoopThreshold |
||
416 | && staticParams.BitConfig & CFG_LOOP_UP) { |
||
417 | looping |= (LOOPING_PITCH_AXIS | LOOPING_UP); |
||
418 | } else if ((looping & LOOPING_UP) && RCChannel(CH_PITCH) |
||
419 | < staticParams.LoopThreshold - staticParams.LoopHysteresis) { |
||
420 | looping &= (~(LOOPING_PITCH_AXIS | LOOPING_UP)); |
||
421 | } |
||
422 | |||
423 | if (RCChannel(CH_PITCH) < -staticParams.LoopThreshold |
||
424 | && staticParams.BitConfig & CFG_LOOP_DOWN) { |
||
425 | looping |= (LOOPING_PITCH_AXIS | LOOPING_DOWN); |
||
426 | } else if ((looping & LOOPING_DOWN) && RCChannel(CH_PITCH) |
||
427 | > -staticParams.LoopThreshold - staticParams.LoopHysteresis) { |
||
428 | looping &= (~(LOOPING_PITCH_AXIS | LOOPING_DOWN)); |
||
429 | } |
||
430 | |||
431 | return looping; |
||
432 | } |
||
433 | */ |
||
434 | |||
435 | uint8_t RC_testCompassCalState(void) { |
||
436 | static uint8_t stick = 1; |
||
437 | // if pitch is centered or top set stick to zero |
||
438 | if (RCChannel(CH_PITCH) > -20) |
||
439 | stick = 0; |
||
440 | // if pitch is down trigger to next cal state |
||
441 | if ((RCChannel(CH_PITCH) < -70) && !stick) { |
||
442 | stick = 1; |
||
443 | return 1; |
||
444 | } |
||
445 | return 0; |
||
446 | } |
||
447 | /* |
||
448 | * Abstract controls are not used at the moment. |
||
449 | t_control rc_control = { |
||
450 | RC_getPitch, |
||
451 | RC_getRoll, |
||
452 | RC_getYaw, |
||
453 | RC_getThrottle, |
||
454 | RC_getSignalQuality, |
||
455 | RC_calibrate |
||
456 | }; |
||
457 | */ |