Subversion Repositories FlightCtrl

// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

// + Copyright (c) 04.2007 Holger Buss

// + Nur für den privaten Gebrauch

// + www.MikroKopter.com

// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

// + Es gilt für das gesamte Projekt (Hardware, Software, Binärfiles, Sourcecode und Dokumentation),

// + dass eine Nutzung (auch auszugsweise) nur für den privaten (nicht-kommerziellen) Gebrauch zulässig ist.

// + Sollten direkte oder indirekte kommerzielle Absichten verfolgt werden, ist mit uns (info@mikrokopter.de) Kontakt

// + bzgl. der Nutzungsbedingungen aufzunehmen.

// + Eine kommerzielle Nutzung ist z.B.Verkauf von MikroKoptern, Bestückung und Verkauf von Platinen oder Bausätzen,

// + Verkauf von Luftbildaufnahmen, usw.

// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

// + Werden Teile des Quellcodes (mit oder ohne Modifikation) weiterverwendet oder veröffentlicht,

// + unterliegen sie auch diesen Nutzungsbedingungen und diese Nutzungsbedingungen incl. Copyright müssen dann beiliegen

// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

// + Sollte die Software (auch auszugesweise) oder sonstige Informationen des MikroKopter-Projekts

// + auf anderen Webseiten oder sonstigen Medien veröffentlicht werden, muss unsere Webseite "http://www.mikrokopter.de"

// + eindeutig als Ursprung verlinkt werden

// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

// + Keine Gewähr auf Fehlerfreiheit, Vollständigkeit oder Funktion

// + Benutzung auf eigene Gefahr

// + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden

// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

// + Die Portierung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur

// + mit unserer Zustimmung zulässig

// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

// + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen

// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

// + Redistributions of source code (with or without modifications) must retain the above copyright notice,

// + this list of conditions and the following disclaimer.

// +   * Neither the name of the copyright holders nor the names of contributors may be used to endorse or promote products derived

// +     from this software without specific prior written permission.

// +   * The use of this project (hardware, software, binary files, sources and documentation) is only permittet

// +     for non-commercial use (directly or indirectly)

// +     Commercial use (for excample: selling of MikroKopters, selling of PCBs, assembly, ...) is only permitted

// +     with our written permission

// +   * If sources or documentations are redistributet on other webpages, out webpage (http://www.MikroKopter.de) must be

// +     clearly linked as origin

// +   * porting to systems other than hardware from www.mikrokopter.de is not allowed

// +  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"

// +  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

// +  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

// +  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE

// +  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR

// +  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

// +  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

// +  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN// +  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

// +  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

// +  POSSIBILITY OF SUCH DAMAGE.

// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

#include <stdlib.h>

#include <inttypes.h>

#include "eeprom.h"

#include "timer2.h"

#include "rc.h"

#include "externalControl.h"

#include "uart0.h"

#include "printf_P.h"

#include "analog.h"

#include "twimaster.h"

#include "attitude.h"

#if (defined (USE_MK3MAG))

#include "ubx.h"

#endif

#if (!defined (USE_MK3MAG))

uint8_t MaxMenuItem = 13;

#else

#ifdef USE_MK3MAG

uint8_t MaxMenuItem = 14;

#endif

#endif

uint8_t MenuItem = 0;

uint8_t RemoteKeys = 0;

#define KEY1    0x01

#define KEY2    0x02

#define KEY3    0x04

#define KEY4    0x08

#define KEY5    0x10

#define DISPLAYBUFFSIZE 80

int8_t DisplayBuff[DISPLAYBUFFSIZE] = "Hello World";

uint8_t DispPtr = 0;

/************************************/

/*        Clear LCD Buffer          */

/************************************/

void LCD_Clear(void)

{

 uint8_t i;

 for( i = 0; i < DISPLAYBUFFSIZE; i++) DisplayBuff[i] = ' ';

}

/************************************/

/*        Update Menu on LCD        */

/************************************/

// Display with 20 characters in 4 lines

void LCD_PrintMenu(void) {

  if(RemoteKeys & KEY1) {

    if(MenuItem) MenuItem--;

    else MenuItem = MaxMenuItem;

  }

  if(RemoteKeys  & KEY2) {

    if(MenuItem == MaxMenuItem) MenuItem = 0;

    else MenuItem++;

  }

  if((RemoteKeys  & KEY1) && (RemoteKeys  & KEY2)) MenuItem = 0;

  LCD_Clear();

  if(MenuItem > MaxMenuItem) MenuItem = MaxMenuItem;

  // print menu item number in the upper right corner

  if(MenuItem < 10) {

    LCD_printfxy(17,0,"[%i]",MenuItem);

  } else {

    LCD_printfxy(16,0,"[%i]",MenuItem);

  }

  switch(MenuItem) {

  case 0:// Version Info Menu Item

    LCD_printfxy(0,0,"+ MikroKopter +");

    LCD_printfxy(0,1,"HW:V%d.%d SW:%d.%d%c",BoardRelease/10,BoardRelease%10,VERSION_MAJOR, VERSION_MINOR, VERSION_PATCH+'a');

    LCD_printfxy(0,2,"Setting: %d %s", getActiveParamSet(), Mixer.Name);

    if(I2CTimeout < 6) {

      LCD_printfxy(0,3,"I2C Error!!!");

    } else if (missingMotor) {

      LCD_printfxy(0,3,"Missing BL-Ctrl:%d", missingMotor);

    }

    else LCD_printfxy(0,3,"(c) Holger Buss");

    break;

    /*

  case 1:// Height Control Menu Item

    if(staticParams.GlobalConfig & CFG_HEIGHT_CONTROL) {

      LCD_printfxy(0,0,"Height:    %5i",ReadingHeight);

      LCD_printfxy(0,1,"Set Point: %5i",SetPointHeight);

      LCD_printfxy(0,2,"Air Press.:%5i",0);

      LCD_printfxy(0,3,"Offset    :%5i",0);

    }

    else

    {

    LCD_printfxy(0,1,"No ");

    LCD_printfxy(0,2,"Height Control");

    }

    break;

    */

  case 2:// Attitude Menu Item

    LCD_printfxy(0,0,"Attitude");

    LCD_printfxy(0,1,"Nick:      %5i", pitchAngle / GYRO_DEG_FACTOR_PITCHROLL);

    LCD_printfxy(0,2,"Roll:      %5i", pitchAngle / GYRO_DEG_FACTOR_PITCHROLL);

    LCD_printfxy(0,3,"Heading:   %5i", compassHeading);

    break;

  case 3:// Remote Control Channel Menu Item

    LCD_printfxy(0,0,"C1:%4i  C2:%4i ",PPM_in[1],PPM_in[2]);

    LCD_printfxy(0,1,"C3:%4i  C4:%4i ",PPM_in[3],PPM_in[4]);

    LCD_printfxy(0,2,"C5:%4i  C6:%4i ",PPM_in[5],PPM_in[6]);

    LCD_printfxy(0,3,"C7:%4i  C8:%4i ",PPM_in[7],PPM_in[8]);

    break;

  case 4:// Remote Control Mapping Menu Item

    LCD_printfxy(0,0,"Ni:%4i  Ro:%4i ",PPM_in[staticParams.ChannelAssignment[CH_PITCH]],PPM_in[staticParams.ChannelAssignment[CH_ROLL]]);

    LCD_printfxy(0,1,"Gs:%4i  Ya:%4i ",PPM_in[staticParams.ChannelAssignment[CH_THROTTLE]],PPM_in[staticParams.ChannelAssignment[CH_YAW]]);

    LCD_printfxy(0,2,"P1:%4i  P2:%4i ",PPM_in[staticParams.ChannelAssignment[CH_POTS]],PPM_in[staticParams.ChannelAssignment[CH_POTS+1]]);

    LCD_printfxy(0,3,"P3:%4i  P4:%4i ",PPM_in[staticParams.ChannelAssignment[CH_POTS+2]],PPM_in[staticParams.ChannelAssignment[CH_POTS+3]]);

    break;

    /*

      case 5:// Gyro Sensor Menu Item

      LCD_printfxy(0,0,"Gyro - Sensor");

      switch(BoardRelease) {

      case 10:

      LCD_printfxy(0,1,"Nick %4i (%3i.%i)", AdValueGyroNick - HiResNickOffset / HIRES_GYRO_AMPLIFY, HiResNickOffset / HIRES_GYRO_AMPLIFY, HiResNickOffset % HIRES_GYRO_AMPLIFY);

      LCD_printfxy(0,2,"Roll %4i (%3i.%i)", AdValueGyroRoll - HiResRollOffset / HIRES_GYRO_AMPLIFY, HiResRollOffset / HIRES_GYRO_AMPLIFY, HiResRollOffset % HIRES_GYRO_AMPLIFY);

      LCD_printfxy(0,3,"Yaw  %4i (%3i)", AdValueGyroYaw , YawOffset);

      break;

      case 11:

      case 12:

      case 20: // divice Offests by 2 becuse 2 samples are added in adc isr

      LCD_printfxy(0,1,"Nick %4i (%3i.%i)",0, HiResNickOffset / (HIRES_GYRO_AMPLIFY * 2), (HiResNickOffset % (HIRES_GYRO_AMPLIFY * 2)) / 2); // division by 2 to push the reminder below 10 (15/2 = 7)

      LCD_printfxy(0,2,"Roll %4i (%3i.%i)",0, HiResRollOffset / (HIRES_GYRO_AMPLIFY * 2), (HiResRollOffset % (HIRES_GYRO_AMPLIFY * 2)) / 2); // division by 2 to push the reminder below 10 (15/2 = 7)

      LCD_printfxy(0,3,"Yaw  %4i (%3i)",YawOffset  - AdValueGyroYaw , YawOffset/2);

      break;

      case 13:

      default: // divice Offests by 2 becuse 2 samples are added in adc isr

      LCD_printfxy(0,1,"Nick %4i (%3i.%i)(%3i)",0, HiResNickOffset / (HIRES_GYRO_AMPLIFY * 2), (HiResNickOffset % (HIRES_GYRO_AMPLIFY * 2))/2, 0); // division by 2 to push the reminder below 10 (15/2 = 7)

      LCD_printfxy(0,2,"Roll %4i (%3i.%i)(%3i)",0, HiResRollOffset / (HIRES_GYRO_AMPLIFY * 2), (HiResRollOffset % (HIRES_GYRO_AMPLIFY * 2))/2, 0); // division by 2 to push the reminder below 10 (15/2 = 7)

      LCD_printfxy(0,3,"Yaw  %4i (%3i)(%3i)",YawOffset  - AdValueGyroYaw , YawOffset/2, 0);

      break;

      }

      break;

      case 6:// Acceleration Sensor Menu Item

      LCD_printfxy(0,0,"ACC - Sensor");

      LCD_printfxy(0,1,"Nick   %4i (%3i)",0,0); // factor 2 because of adding 2 samples in ADC ISR

      LCD_printfxy(0,2,"Roll   %4i (%3i)",0,0); // factor 2 because of adding 2 samples in ADC ISR

      LCD_printfxy(0,3,"Height %4i (%3i)",0,0);

      break;

    */

  case 7:// Battery Voltage / Remote Control Level

    LCD_printfxy(0,1,"Voltage:  %3i.%1iV",UBat/10, UBat%10);

    LCD_printfxy(0,2,"RC-Level: %5i",RC_Quality);

    break;

  case 8:// Compass Menu Item

    LCD_printfxy(0,0,"Compass       ");

    LCD_printfxy(0,1,"Course:    %5i", compassCourse);

    LCD_printfxy(0,2,"Heading:   %5i", compassHeading);

    LCD_printfxy(0,3,"OffCourse: %5i", compassOffCourse);

    break;

  case 9:// Poti Menu Item

    LCD_printfxy(0,0,"Po1: %3i Po5: %3i" ,variables[0], variables[4]); //PPM24-Extesion

    LCD_printfxy(0,1,"Po2: %3i Po6: %3i" ,variables[1], variables[5]); //PPM24-Extesion

    LCD_printfxy(0,2,"Po3: %3i Po7: %3i" ,variables[2], variables[6]); //PPM24-Extesion

    LCD_printfxy(0,3,"Po4: %3i Po8: %3i" ,variables[3], variables[7]); //PPM24-Extesion

    break;

    /*

  case 10:// Servo Menu Item

    LCD_printfxy(0,0,"Servo  " );

    LCD_printfxy(0,1,"Setpoint  %3i",dynamicParams.ServoNickControl);

    LCD_printfxy(0,2,"Position: %3i",ServoNickValue);

    LCD_printfxy(0,3,"Range:%3i-%3i",staticParams.ServoNickMin, staticParams.ServoNickMax);

    break;

    */

  case 11://Extern Control

    LCD_printfxy(0,0,"ExternControl  " );

    LCD_printfxy(0,1,"Ni:%4i  Ro:%4i ", externalControl.pitch, externalControl.roll);

    LCD_printfxy(0,2,"Gs:%4i  Ya:%4i ", externalControl.throttle, externalControl.yaw);

    LCD_printfxy(0,3,"Hi:%4i  Cf:%4i ", externalControl.height, externalControl.config);

    break;

  case 12://BL Communication errors

    LCD_printfxy(0,0,"BL-Ctrl Errors " );

    LCD_printfxy(0,1," %3d  %3d  %3d  %3d ",Motor[0].Error,Motor[1].Error,Motor[2].Error,Motor[3].Error);

    LCD_printfxy(0,2," %3d  %3d  %3d  %3d ",Motor[4].Error,Motor[5].Error,Motor[6].Error,Motor[7].Error);

    LCD_printfxy(0,3," %3d  %3d  %3d  %3d ",Motor[8].Error,Motor[9].Error,Motor[10].Error,Motor[11].Error);

    break;

  case 13://BL Overview

    LCD_printfxy(0,0,"BL-Ctrl found " );

    LCD_printfxy(0,1," %c   %c   %c   %c ",Motor[0].Present + '-',Motor[1].Present + '-',Motor[2].Present + '-',Motor[3].Present + '-');

    LCD_printfxy(0,2," %c   %c   %c   %c ",Motor[4].Present + '-',Motor[5].Present + '-',Motor[6].Present + '-',Motor[7].Present + '-');

    LCD_printfxy(0,3," %c   -   -   - ",Motor[8].Present + '-');

    if(Motor[9].Present)  LCD_printfxy(4,3,"10");

    if(Motor[10].Present) LCD_printfxy(8,3,"11");

    if(Motor[11].Present) LCD_printfxy(12,3,"12");

    break;

#if (defined (USE_MK3MAG))

  case 14://GPS Lat/Lon coords

    if (GPSInfo.status == INVALID) {

      LCD_printfxy(0,0,"No GPS data!");

    } else {

      switch (GPSInfo.satfix)

        {

        case SATFIX_NONE:

          LCD_printfxy(0,0,"Sats: %d Fix: No", GPSInfo.satnum);

          break;

        case SATFIX_2D:

          LCD_printfxy(0,0,"Sats: %d Fix: 2D", GPSInfo.satnum);

          break;

        case SATFIX_3D:

          LCD_printfxy(0,0,"Sats: %d Fix: 3D", GPSInfo.satnum);

          break;

        default:

          LCD_printfxy(0,0,"Sats: %d Fix: ??", GPSInfo.satnum);

          break;

        }

      int16_t i1,i2,i3;

      i1 = (int16_t)(GPSInfo.longitude/10000000L);

      i2 = abs((int16_t)((GPSInfo.longitude%10000000L)/10000L));

      i3 = abs((int16_t)(((GPSInfo.longitude%10000000L)%10000L)/10L));

      LCD_printfxy(0,1,"Lon: %d.%03d%03d deg",i1, i2, i3);

      i1 = (int16_t)(GPSInfo.latitude/10000000L);

      i2 = abs((int16_t)((GPSInfo.latitude%10000000L)/10000L));

      i3 = abs((int16_t)(((GPSInfo.latitude%10000000L)%10000L)/10L));

      LCD_printfxy(0,2,"Lat: %d.%03d%03d deg",i1, i2, i3);

      i1 = (int16_t)(GPSInfo.altitude/1000L);

      i2 = abs((int16_t)(GPSInfo.altitude%1000L));

      LCD_printfxy(0,3,"Alt: %d.%03d m",i1, i2);

    }

    break;

#endif

  default:

    MaxMenuItem = MenuItem - 1;

    MenuItem = 0;

    break;

  }

  RemoteKeys = 0;

}