Subversion Repositories FlightCtrl

#include <inttypes.h>

#include "analog.h"

#include "attitude.h"

#include "configuration.h"

#include "controlMixer.h"

// for digital / LED debug.

#include "output.h"

// For scope debugging only!

#include "rc.h"

#define INTEGRAL_LIMIT 100000

#define LATCH_TIME 40

int32_t targetHeight;

int32_t rampedTargetHeight;

uint8_t heightRampingTimer = 0;

int32_t maxHeightThisFlight;

int32_t iHeight;

void HC_setGround(void) {

  analog_setGround();

  // This should also happen when height control is enabled in-flight.

  rampedTargetHeight = targetHeight = analog_getHeight();

  maxHeightThisFlight = 0;

  iHeight = 0;

}

void HC_periodicTask(void) {

  int32_t height = analog_getHeight();

  static uint8_t setHeightLatch = 0;

  if (height > maxHeightThisFlight)

    maxHeightThisFlight = height;

  // debugOut.analog[25] = dynamicParams.heightSetting;

  if (staticParams.bitConfig & CFG_SIMPLE_HC_HOLD_SWITCH) {

    // If switch is activated in config, the MaxHeight parameter is a switch value: ON in both ends of the range; OFF in the middle.

    // if (dynamicParams.heightSetting < 40 || dynamicParams.heightSetting > 255 - 40) {

    if (dynamicParams.heightSetting >= 255/3) {

      // Switch is ON

      if (setHeightLatch <= LATCH_TIME) {

        if (setHeightLatch == LATCH_TIME) {

          // Freeze the height as target. We want to do this exactly once each time the switch is thrown ON.

          rampedTargetHeight = targetHeight = height;

        }

        // Time not yet reached.

        setHeightLatch++;

      }

    } else {

      // Switch is OFF.

      setHeightLatch = 0;

    }

  } else {

    // Switch is not activated; take the "max-height" as the target height.

    targetHeight = (uint16_t) dynamicParams.heightSetting * 25L - 500L; // should be: 100 (or make a param out of it)

  }

  if (++heightRampingTimer == INTEGRATION_FREQUENCY / 10) {

    heightRampingTimer = 0;

    if (rampedTargetHeight < targetHeight) {

      // climbing

      if (rampedTargetHeight < targetHeight - staticParams.heightSlewRate) {

        rampedTargetHeight += staticParams.heightSlewRate;

      } else {

        rampedTargetHeight = targetHeight;

      }

    } else {

      // descending

      if (rampedTargetHeight > targetHeight + staticParams.heightSlewRate) {

        rampedTargetHeight -= staticParams.heightSlewRate;

      } else {

        rampedTargetHeight = targetHeight;

      }

    }

  }

  // height, in meters (so the division factor is: 100)

  // debugOut.analog[24] = (117100 - filteredAirPressure) / 100;

  // Calculated 0 alt number: 108205

  // Experimental 0 alt number: 117100

}

// takes 180-200 usec (with integral term). That is too heavy!!!

// takes 100 usec without integral term.

void HC_periodicTaskAndPRTY(int16_t* PRTY) {

  HC_periodicTask();

  int16_t throttle = PRTY[CONTROL_THROTTLE];

  int32_t height = analog_getHeight();

  int32_t heightError = rampedTargetHeight - height;

  int16_t dHeight = analog_getDHeight();

  debugOut.analog[22] = height/10L;

  debugOut.analog[23] = dHeight;

  if (heightError > 0) {

    debugOut.digital[0] |= DEBUG_HEIGHT_DIFF;

  } else {

    debugOut.digital[0] &= ~DEBUG_HEIGHT_DIFF;

  }

  if (dHeight > 0) {

    debugOut.digital[1] |= DEBUG_HEIGHT_DIFF;

  } else {

    debugOut.digital[1] &= ~DEBUG_HEIGHT_DIFF;

  }

  // iHeight, at a difference of 5 meters and a freq. of 488 Hz, will grow with 244000 / sec....

  iHeight += heightError;

#define IHEIGHT_SCALE 24

  // dThrottle is in the range between +/- 1<<(IHEIGHT_SCALE+8)>>(IHEIGHT_SCALE) = +/- 256

  int16_t dThrottleI =  (iHeight * (int32_t)dynamicParams.heightI) >> (IHEIGHT_SCALE);

  if (dThrottleI > staticParams.heightControlMaxIntegral) {

    dThrottleI = staticParams.heightControlMaxIntegral;

    iHeight = ((int32_t)staticParams.heightControlMaxIntegral << IHEIGHT_SCALE) / dynamicParams.heightI;

  } else if (dThrottleI < -staticParams.heightControlMaxIntegral) {

    dThrottleI = -staticParams.heightControlMaxIntegral;

    iHeight = -((int32_t)staticParams.heightControlMaxIntegral << IHEIGHT_SCALE) / dynamicParams.heightI;

  }

  int16_t dThrottleP = (heightError * dynamicParams.heightP) >> 10;

  int16_t dThrottleD = (dHeight * dynamicParams.heightD) >> 7;

  //debugOut.analog[24] = dThrottleP;

  //debugOut.analog[25] = dThrottleI;

  //debugOut.analog[26] = dThrottleD;

  //debugOut.analog[27] = dynamicParams.heightP;

  //debugOut.analog[28] = dynamicParams.heightI;

  //debugOut.analog[29] = dynamicParams.heightD;

  int16_t dThrottle = dThrottleI + dThrottleP + dThrottleD;

  if (dThrottle > staticParams.heightControlMaxThrottleChange)

    dThrottle = staticParams.heightControlMaxThrottleChange;

  else if (dThrottle < -staticParams.heightControlMaxThrottleChange)

    dThrottle = -staticParams.heightControlMaxThrottleChange;

  /*

  debugOut.analog[19] = throttle;

  debugOut.analog[20] = dThrottle;

  debugOut.analog[21] = height;

  debugOut.analog[22] = rampedTargetHeight;

  debugOut.analog[23] = heightError;

  */

  if (staticParams.bitConfig & CFG_SIMPLE_HEIGHT_CONTROL) {

    if (!(staticParams.bitConfig & CFG_SIMPLE_HC_HOLD_SWITCH)

        || (dynamicParams.heightSetting < 40 || dynamicParams.heightSetting > 255 - 40)) {

      // If switch is not in use --> Just apply height control.

      // If switch is in use     --> only apply height control when switch is also ON.

      throttle += dThrottle;

    }

  }

  /* Experiment: Find hover-throttle */

#define DEFAULT_HOVERTHROTTLE 50

int32_t stronglyFilteredHeightDiff = 0;

// uint16_t hoverThrottle = 0; // DEFAULT_HOVERTHROTTLE;

uint16_t stronglyFilteredThrottle = DEFAULT_HOVERTHROTTLE;

#define HOVERTHROTTLEFILTER 25

  stronglyFilteredHeightDiff = (stronglyFilteredHeightDiff

                                * (HOVERTHROTTLEFILTER - 1) + dHeight) / HOVERTHROTTLEFILTER;

  stronglyFilteredThrottle = (stronglyFilteredThrottle * (HOVERTHROTTLEFILTER

                                                          - 1) + throttle) / HOVERTHROTTLEFILTER;

  /*

  if (isFlying >= 1000 && stronglyFilteredHeightDiff < 3

      && stronglyFilteredHeightDiff > -3) {

    hoverThrottle = stronglyFilteredThrottle;

    debugOut.digital[0] |= DEBUG_HOVERTHROTTLE;

  } else

    debugOut.digital[0] &= ~DEBUG_HOVERTHROTTLE;

    */

  PRTY[CONTROL_THROTTLE] = throttle;

}

/*

 For a variometer thingy:

 When switch is thrown on, freeze throttle (capture it into variable)

 For each iter., add (throttle - frozen throttle) to target height. Maybe don't do ramping.

 Output = frozen throttle + whatever is computed +/-. Integral?

 */