Rev 1615 | Rev 1635 | Go to most recent revision | Details | Compare with Previous | Last modification | View Log | RSS feed
Rev | Author | Line No. | Line |
---|---|---|---|
1612 | dongfang | 1 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
2 | // + Copyright (c) 04.2007 Holger Buss |
||
1623 | - | 3 | // + Nur für den privaten Gebrauch |
1612 | dongfang | 4 | // + www.MikroKopter.com |
5 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
1623 | - | 6 | // + Es gilt für das gesamte Projekt (Hardware, Software, Binärfiles, Sourcecode und Dokumentation), |
7 | // + dass eine Nutzung (auch auszugsweise) nur für den privaten und nicht-kommerziellen Gebrauch zulässig ist. |
||
1612 | dongfang | 8 | // + Sollten direkte oder indirekte kommerzielle Absichten verfolgt werden, ist mit uns (info@mikrokopter.de) Kontakt |
9 | // + bzgl. der Nutzungsbedingungen aufzunehmen. |
||
1623 | - | 10 | // + Eine kommerzielle Nutzung ist z.B.Verkauf von MikroKoptern, Bestückung und Verkauf von Platinen oder Bausätzen, |
1612 | dongfang | 11 | // + Verkauf von Luftbildaufnahmen, usw. |
12 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
1623 | - | 13 | // + Werden Teile des Quellcodes (mit oder ohne Modifikation) weiterverwendet oder veröffentlicht, |
14 | // + unterliegen sie auch diesen Nutzungsbedingungen und diese Nutzungsbedingungen incl. Copyright müssen dann beiliegen |
||
1612 | dongfang | 15 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
16 | // + Sollte die Software (auch auszugesweise) oder sonstige Informationen des MikroKopter-Projekts |
||
1623 | - | 17 | // + auf anderen Webseiten oder Medien veröffentlicht werden, muss unsere Webseite "http://www.mikrokopter.de" |
18 | // + eindeutig als Ursprung verlinkt und genannt werden |
||
1612 | dongfang | 19 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
1623 | - | 20 | // + Keine Gewähr auf Fehlerfreiheit, Vollständigkeit oder Funktion |
1612 | dongfang | 21 | // + Benutzung auf eigene Gefahr |
1623 | - | 22 | // + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden |
1612 | dongfang | 23 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
24 | // + Die Portierung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur |
||
1623 | - | 25 | // + mit unserer Zustimmung zulässig |
1612 | dongfang | 26 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
27 | // + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen |
||
28 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
29 | // + Redistributions of source code (with or without modifications) must retain the above copyright notice, |
||
30 | // + this list of conditions and the following disclaimer. |
||
31 | // + * Neither the name of the copyright holders nor the names of contributors may be used to endorse or promote products derived |
||
32 | // + from this software without specific prior written permission. |
||
33 | // + * The use of this project (hardware, software, binary files, sources and documentation) is only permittet |
||
34 | // + for non-commercial use (directly or indirectly) |
||
35 | // + Commercial use (for excample: selling of MikroKopters, selling of PCBs, assembly, ...) is only permitted |
||
36 | // + with our written permission |
||
37 | // + * If sources or documentations are redistributet on other webpages, out webpage (http://www.MikroKopter.de) must be |
||
38 | // + clearly linked as origin |
||
39 | // + * porting to systems other than hardware from www.mikrokopter.de is not allowed |
||
40 | // + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
||
41 | // + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
||
42 | // + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
||
43 | // + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
||
44 | // + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
||
45 | // + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
||
46 | // + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
||
1623 | - | 47 | // + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
48 | // + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
||
1612 | dongfang | 49 | // + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
50 | // + POSSIBILITY OF SUCH DAMAGE. |
||
51 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
1623 | - | 52 | |
1612 | dongfang | 53 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
54 | // + Contant Values |
||
55 | // + 0-250 -> normale Values |
||
56 | // + 251 -> Poti1 |
||
57 | // + 252 -> Poti2 |
||
58 | // + 253 -> Poti3 |
||
59 | // + 254 -> Poti4 |
||
60 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
61 | |||
62 | #ifndef EEMEM |
||
63 | #define EEMEM __attribute__ ((section (".eeprom"))) |
||
64 | #endif |
||
65 | |||
66 | #include <avr/eeprom.h> |
||
67 | #include <string.h> |
||
68 | #include "eeprom.h" |
||
69 | #include "printf_P.h" |
||
70 | #include "output.h" |
||
71 | // TODO: Get rid of these. They have nothing to do with eeprom. |
||
72 | #include "flight.h" |
||
73 | #include "rc.h" |
||
74 | #include "sensors.h" |
||
75 | |||
76 | // byte array in eeprom |
||
77 | uint8_t EEPromArray[E2END+1] EEMEM; |
||
78 | |||
79 | paramset_t staticParams; |
||
80 | MixerTable_t Mixer; |
||
81 | |||
82 | /* |
||
83 | * Default for your own experiments here, so you don't have to reset them |
||
84 | * from MK-Tool all the time. |
||
85 | */ |
||
86 | void setDefaultUserParams(void) { |
||
87 | uint8_t i; |
||
88 | for (i=0; i<sizeof(staticParams.UserParams1); i++) { |
||
89 | staticParams.UserParams1[i] = 0; |
||
90 | } |
||
91 | for (i=0; i<sizeof(staticParams.UserParams2); i++) { |
||
92 | staticParams.UserParams2[i] = 0; |
||
93 | } |
||
94 | } |
||
95 | |||
96 | void setOtherDefaults(void) { |
||
1614 | dongfang | 97 | /* Channel assignments were changed to the normal: |
98 | * Aileron/roll=1, elevator/pitch=2, throttle=3, yaw/rudder=4 |
||
99 | */ |
||
100 | staticParams.ChannelAssignment[CH_PITCH] = 2; |
||
101 | staticParams.ChannelAssignment[CH_ROLL] = 1; |
||
102 | staticParams.ChannelAssignment[CH_THROTTLE] = 3; |
||
103 | staticParams.ChannelAssignment[CH_YAW] = 4; |
||
104 | staticParams.ChannelAssignment[CH_POTS+0] = 5; |
||
105 | staticParams.ChannelAssignment[CH_POTS+1] = 6; |
||
106 | staticParams.ChannelAssignment[CH_POTS+2] = 7; |
||
107 | staticParams.ChannelAssignment[CH_POTS+3] = 8; |
||
1612 | dongfang | 108 | staticParams.GlobalConfig = CFG_AXIS_COUPLING_ACTIVE | CFG_COMPASS_ACTIVE | CFG_GPS_ACTIVE;//CFG_HEIGHT_CONTROL | CFG_HEIGHT_SWITCH | CFG_COMPASS_FIX; |
109 | staticParams.HeightMinGas = 30; |
||
110 | staticParams.MaxHeight = 251; |
||
111 | staticParams.HeightP = 10; |
||
112 | staticParams.HeightD = 30; |
||
113 | staticParams.Height_ACC_Effect = 30; |
||
114 | staticParams.Height_Gain = 4; |
||
115 | staticParams.StickP = 12; |
||
116 | staticParams.StickD = 16; |
||
117 | staticParams.StickYawP = 12; |
||
1615 | dongfang | 118 | staticParams.MinThrottle = 8; |
119 | staticParams.MaxThrottle = 230; |
||
1612 | dongfang | 120 | staticParams.CompassYawEffect = 128; |
121 | staticParams.GyroP = 80; |
||
122 | staticParams.GyroI = 100; |
||
123 | staticParams.LowVoltageWarning = 94; |
||
124 | staticParams.EmergencyGas = 35; |
||
125 | staticParams.EmergencyGasDuration = 30; |
||
126 | staticParams.UfoArrangement = 0; |
||
127 | staticParams.IFactor = 32; |
||
128 | staticParams.ServoPitchControl = 100; |
||
129 | staticParams.ServoPitchComp = 40; |
||
130 | staticParams.ServoPitchCompInvert = 0; |
||
131 | staticParams.ServoPitchMin = 50; |
||
132 | staticParams.ServoPitchMax = 150; |
||
133 | staticParams.ServoRefresh = 5; |
||
134 | staticParams.LoopGasLimit = 50; |
||
135 | staticParams.LoopThreshold = 90; |
||
136 | staticParams.LoopHysteresis = 50; |
||
137 | staticParams.BitConfig = 0; |
||
138 | staticParams.AxisCoupling1 = 90; |
||
139 | staticParams.AxisCoupling2 = 67; |
||
140 | staticParams.AxisCouplingYawCorrection = 0; |
||
141 | staticParams.GyroAccTrim = 2; |
||
142 | staticParams.DynamicStability = 50; |
||
143 | staticParams.J16Bitmask = 95; |
||
144 | staticParams.J17Bitmask = 243; |
||
145 | staticParams.J16Timing = 15; |
||
146 | staticParams.J17Timing = 15; |
||
147 | staticParams.NaviGpsModeControl = 253; |
||
148 | staticParams.NaviGpsGain = 100; |
||
149 | staticParams.NaviGpsP = 90; |
||
150 | staticParams.NaviGpsI = 90; |
||
151 | staticParams.NaviGpsD = 90; |
||
152 | staticParams.NaviGpsPLimit = 75; |
||
153 | staticParams.NaviGpsILimit = 75; |
||
154 | staticParams.NaviGpsDLimit = 75; |
||
155 | staticParams.NaviGpsACC = 0; |
||
156 | staticParams.NaviGpsMinSat = 6; |
||
157 | staticParams.NaviStickThreshold = 8; |
||
158 | staticParams.NaviWindCorrection = 90; |
||
159 | staticParams.NaviSpeedCompensation = 30; |
||
160 | staticParams.NaviOperatingRadius = 100; |
||
161 | staticParams.NaviAngleLimitation = 100; |
||
162 | staticParams.NaviPHLoginTime = 4; |
||
163 | } |
||
164 | |||
165 | /***************************************************/ |
||
166 | /* Default Values for parameter set 1 */ |
||
167 | /***************************************************/ |
||
168 | void ParamSet_DefaultSet1(void) { // sport |
||
169 | gyro_setDefaults(); |
||
170 | setDefaultUserParams(); |
||
171 | setOtherDefaults(); |
||
172 | memcpy(staticParams.Name, "Sport\0",6); |
||
173 | } |
||
174 | |||
175 | /***************************************************/ |
||
176 | /* Default Values for parameter set 2 */ |
||
177 | /***************************************************/ |
||
178 | void ParamSet_DefaultSet2(void) { // normal |
||
179 | gyro_setDefaults(); |
||
180 | setDefaultUserParams(); |
||
181 | setOtherDefaults(); |
||
182 | staticParams.Height_Gain = 3; |
||
183 | staticParams.GyroAccTrim = 32; |
||
184 | staticParams.J16Timing = 20; |
||
185 | staticParams.J17Timing = 20; |
||
186 | memcpy(staticParams.Name, "Normal\0", 7); |
||
187 | } |
||
188 | |||
189 | /***************************************************/ |
||
190 | /* Default Values for parameter set 3 */ |
||
191 | /***************************************************/ |
||
192 | void ParamSet_DefaultSet3(void) { // beginner |
||
193 | gyro_setDefaults(); |
||
194 | setDefaultUserParams(); |
||
195 | setOtherDefaults(); |
||
196 | staticParams.GlobalConfig = CFG_ROTARY_RATE_LIMITER | CFG_AXIS_COUPLING_ACTIVE | CFG_COMPASS_ACTIVE | CFG_GPS_ACTIVE;//CFG_HEIGHT_CONTROL | CFG_HEIGHT_SWITCH | CFG_COMPASS_FIX; |
||
197 | staticParams.Height_Gain = 3; |
||
198 | staticParams.EmergencyGasDuration = 20; |
||
199 | staticParams.AxisCouplingYawCorrection = 70; |
||
200 | staticParams.GyroAccTrim = 32; |
||
201 | staticParams.J16Timing = 30; |
||
202 | staticParams.J17Timing = 30; |
||
203 | memcpy(staticParams.Name, "Beginner\0", 9); |
||
204 | } |
||
205 | |||
206 | /***************************************************/ |
||
207 | /* Read Parameter from EEPROM as byte */ |
||
208 | /***************************************************/ |
||
209 | uint8_t GetParamByte(uint16_t param_id) { |
||
210 | return eeprom_read_byte(&EEPromArray[EEPROM_ADR_PARAM_BEGIN + param_id]); |
||
211 | } |
||
212 | |||
213 | /***************************************************/ |
||
214 | /* Write Parameter to EEPROM as byte */ |
||
215 | /***************************************************/ |
||
216 | void SetParamByte(uint16_t param_id, uint8_t value) { |
||
217 | eeprom_write_byte(&EEPromArray[EEPROM_ADR_PARAM_BEGIN + param_id], value); |
||
218 | } |
||
219 | |||
220 | /***************************************************/ |
||
221 | /* Read Parameter from EEPROM as word */ |
||
222 | /***************************************************/ |
||
223 | uint16_t GetParamWord(uint16_t param_id) { |
||
224 | return eeprom_read_word((uint16_t *) &EEPromArray[EEPROM_ADR_PARAM_BEGIN + param_id]); |
||
225 | } |
||
226 | |||
227 | /***************************************************/ |
||
228 | /* Write Parameter to EEPROM as word */ |
||
229 | /***************************************************/ |
||
230 | void SetParamWord(uint16_t param_id, uint16_t value) { |
||
231 | eeprom_write_word((uint16_t *) &EEPromArray[EEPROM_ADR_PARAM_BEGIN + param_id], value); |
||
232 | } |
||
233 | |||
234 | /***************************************************/ |
||
235 | /* Read Parameter Set from EEPROM */ |
||
236 | /***************************************************/ |
||
237 | // number [1..5] |
||
238 | void ParamSet_ReadFromEEProm(uint8_t setnumber) { |
||
239 | if((1 > setnumber) || (setnumber > 5)) setnumber = 3; |
||
240 | eeprom_read_block((uint8_t *) &staticParams.ChannelAssignment[0], &EEPromArray[EEPROM_ADR_PARAMSET_BEGIN + PARAMSET_STRUCT_LEN * (setnumber - 1)], PARAMSET_STRUCT_LEN); |
||
241 | output_init(); |
||
242 | } |
||
243 | |||
244 | /***************************************************/ |
||
245 | /* Write Parameter Set to EEPROM */ |
||
246 | /***************************************************/ |
||
247 | // number [1..5] |
||
248 | void ParamSet_WriteToEEProm(uint8_t setnumber) { |
||
249 | if(setnumber > 5) setnumber = 5; |
||
250 | if(setnumber < 1) return; |
||
251 | eeprom_write_block((uint8_t *) &staticParams.ChannelAssignment[0], &EEPromArray[EEPROM_ADR_PARAMSET_BEGIN + PARAMSET_STRUCT_LEN * (setnumber - 1)], PARAMSET_STRUCT_LEN); |
||
252 | eeprom_write_word((uint16_t *) &EEPromArray[EEPROM_ADR_PARAMSET_LENGTH], PARAMSET_STRUCT_LEN); |
||
253 | eeprom_write_block( &staticParams.ChannelAssignment[0], &EEPromArray[EEPROM_ADR_CHANNELS], 8); // backup the first 8 bytes that is the rc channel mapping |
||
254 | // set this parameter set to active set |
||
255 | setActiveParamSet(setnumber); |
||
256 | output_init(); |
||
257 | } |
||
258 | |||
259 | |||
260 | /***************************************************/ |
||
261 | /* Get active parameter set */ |
||
262 | /***************************************************/ |
||
263 | uint8_t getActiveParamSet(void) { |
||
264 | uint8_t setnumber; |
||
265 | setnumber = eeprom_read_byte(&EEPromArray[PID_ACTIVE_SET]); |
||
266 | if(setnumber > 5) { |
||
267 | setnumber = 3; |
||
268 | eeprom_write_byte(&EEPromArray[PID_ACTIVE_SET], setnumber); |
||
269 | } |
||
270 | return(setnumber); |
||
271 | } |
||
272 | |||
273 | /***************************************************/ |
||
274 | /* Set active parameter set */ |
||
275 | /***************************************************/ |
||
276 | void setActiveParamSet(uint8_t setnumber) { |
||
277 | if(setnumber > 5) setnumber = 5; |
||
278 | if(setnumber < 1) setnumber = 1; |
||
279 | eeprom_write_byte(&EEPromArray[PID_ACTIVE_SET], setnumber); |
||
280 | } |
||
281 | |||
282 | /***************************************************/ |
||
283 | /* Read MixerTable from EEPROM */ |
||
284 | /***************************************************/ |
||
285 | uint8_t MixerTable_ReadFromEEProm(void) { |
||
286 | if(eeprom_read_byte(&EEPromArray[EEPROM_ADR_MIXER_TABLE]) == EEMIXER_REVISION) { |
||
287 | eeprom_read_block((uint8_t *) &Mixer, &EEPromArray[EEPROM_ADR_MIXER_TABLE], sizeof(Mixer)); |
||
288 | return 1; |
||
289 | } |
||
290 | else return 0; |
||
291 | } |
||
292 | |||
293 | /***************************************************/ |
||
294 | /* Write Mixer Table to EEPROM */ |
||
295 | /***************************************************/ |
||
296 | uint8_t MixerTable_WriteToEEProm(void) { |
||
297 | if(Mixer.Revision == EEMIXER_REVISION) { |
||
298 | eeprom_write_block((uint8_t *) &Mixer, &EEPromArray[EEPROM_ADR_MIXER_TABLE], sizeof(Mixer)); |
||
299 | return 1; |
||
300 | } |
||
301 | else return 0; |
||
302 | } |
||
303 | |||
304 | /***************************************************/ |
||
305 | /* Default Values for Mixer Table */ |
||
306 | /***************************************************/ |
||
307 | void MixerTable_Default(void) { // Quadro |
||
308 | uint8_t i; |
||
309 | Mixer.Revision = EEMIXER_REVISION; |
||
310 | // clear mixer table (but preset throttle) |
||
311 | for(i = 0; i < 16; i++) { |
||
312 | Mixer.Motor[i][MIX_THROTTLE] = i < 4 ? 64 : 0; |
||
313 | Mixer.Motor[i][MIX_PITCH] = 0; |
||
314 | Mixer.Motor[i][MIX_ROLL] = 0; |
||
315 | Mixer.Motor[i][MIX_YAW] = 0; |
||
316 | } |
||
317 | // default = Quadro |
||
318 | Mixer.Motor[0][MIX_PITCH] = +64; Mixer.Motor[0][MIX_YAW] = +64; |
||
319 | Mixer.Motor[1][MIX_PITCH] = -64; Mixer.Motor[1][MIX_YAW] = +64; |
||
320 | Mixer.Motor[2][MIX_ROLL] = -64; Mixer.Motor[2][MIX_YAW] = -64; |
||
321 | Mixer.Motor[3][MIX_ROLL] = +64; Mixer.Motor[3][MIX_YAW] = -64; |
||
322 | memcpy(Mixer.Name, "Quadro\0", 7); |
||
323 | } |
||
324 | |||
325 | /***************************************************/ |
||
326 | /* Initialize EEPROM Parameter Sets */ |
||
327 | /***************************************************/ |
||
328 | void ParamSet_Init(void) { |
||
329 | uint8_t Channel_Backup = 0, i; |
||
330 | // parameter version check |
||
331 | if(eeprom_read_byte(&EEPromArray[PID_PARAM_REVISION]) != EEPARAM_REVISION) { |
||
332 | // if version check faild |
||
333 | printf("\n\rInit Parameter in EEPROM"); |
||
334 | eeprom_write_byte(&EEPromArray[EEPROM_ADR_MIXER_TABLE], 0xFF); // reset also mixer table |
||
335 | // check if channel mapping backup is valid |
||
336 | if( (eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+0]) < 12) |
||
337 | && (eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+1]) < 12) |
||
338 | && (eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+2]) < 12) |
||
339 | && (eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+3]) < 12) |
||
340 | ) |
||
341 | { |
||
342 | Channel_Backup = 1; |
||
343 | } |
||
344 | // fill all 5 parameter settings |
||
345 | for (i=1; i<6; i++) { |
||
346 | switch(i) { |
||
347 | case 1: |
||
348 | ParamSet_DefaultSet1(); // Fill staticParams Structure to default parameter set 1 (Sport) |
||
349 | break; |
||
350 | case 2: |
||
351 | ParamSet_DefaultSet2(); // Kamera |
||
352 | break; |
||
353 | case 3: |
||
354 | ParamSet_DefaultSet3(); // Beginner |
||
355 | break; |
||
356 | default: |
||
357 | ParamSet_DefaultSet2(); // Kamera |
||
358 | break; |
||
359 | } |
||
360 | if(Channel_Backup) { // if we have a rc channel mapping backup in eeprom |
||
361 | // restore it |
||
362 | staticParams.ChannelAssignment[0] = eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+0]); |
||
363 | staticParams.ChannelAssignment[1] = eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+1]); |
||
364 | staticParams.ChannelAssignment[2] = eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+2]); |
||
365 | staticParams.ChannelAssignment[3] = eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+3]); |
||
366 | staticParams.ChannelAssignment[4] = eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+4]); |
||
367 | staticParams.ChannelAssignment[5] = eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+5]); |
||
368 | staticParams.ChannelAssignment[6] = eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+6]); |
||
369 | staticParams.ChannelAssignment[7] = eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+7]); |
||
370 | } |
||
371 | ParamSet_WriteToEEProm(i); |
||
372 | } |
||
373 | // default-Setting is parameter set 3 |
||
374 | setActiveParamSet(1); |
||
375 | // update version info |
||
376 | SetParamByte(PID_PARAM_REVISION, EEPARAM_REVISION); |
||
377 | } |
||
378 | // read active parameter set to staticParams stucture |
||
379 | ParamSet_ReadFromEEProm(getActiveParamSet()); |
||
380 | printf("\n\rUsing Parameter Set %d", getActiveParamSet()); |
||
381 | |||
382 | // load mixer table |
||
383 | if(!MixerTable_ReadFromEEProm()) { |
||
384 | printf("\n\rGenerating default Mixer Table"); |
||
385 | MixerTable_Default(); // Quadro |
||
386 | MixerTable_WriteToEEProm(); |
||
387 | } |
||
388 | // determine motornumber |
||
389 | RequiredMotors = 0; |
||
390 | for(i = 0; i < 16; i++) { |
||
391 | if(Mixer.Motor[i][MIX_THROTTLE] > 0) RequiredMotors++; |
||
392 | } |
||
393 | |||
394 | printf("\n\rMixer-Config: '%s' (%u Motors)",Mixer.Name, RequiredMotors); |
||
395 | printf("\n\r=============================="); |
||
396 | } |