Rev 2018 | Rev 2020 | Go to most recent revision | Details | Compare with Previous | Last modification | View Log | RSS feed
Rev | Author | Line No. | Line |
---|---|---|---|
1612 | dongfang | 1 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
2 | // + Copyright (c) 04.2007 Holger Buss |
||
3 | // + Nur für den privaten Gebrauch |
||
4 | // + www.MikroKopter.com |
||
5 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
6 | // + Es gilt für das gesamte Projekt (Hardware, Software, Binärfiles, Sourcecode und Dokumentation), |
||
2017 | - | 7 | // + dass eine Nutzung (auch auszugsweise) nur für den privaten und nicht-kommerziellen Gebrauch zulässig ist. |
1612 | dongfang | 8 | // + Sollten direkte oder indirekte kommerzielle Absichten verfolgt werden, ist mit uns (info@mikrokopter.de) Kontakt |
9 | // + bzgl. der Nutzungsbedingungen aufzunehmen. |
||
10 | // + Eine kommerzielle Nutzung ist z.B.Verkauf von MikroKoptern, Bestückung und Verkauf von Platinen oder Bausätzen, |
||
11 | // + Verkauf von Luftbildaufnahmen, usw. |
||
12 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
13 | // + Werden Teile des Quellcodes (mit oder ohne Modifikation) weiterverwendet oder veröffentlicht, |
||
14 | // + unterliegen sie auch diesen Nutzungsbedingungen und diese Nutzungsbedingungen incl. Copyright müssen dann beiliegen |
||
15 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
16 | // + Sollte die Software (auch auszugesweise) oder sonstige Informationen des MikroKopter-Projekts |
||
1963 | - | 17 | // + auf anderen Webseiten oder Medien veröffentlicht werden, muss unsere Webseite "http://www.mikrokopter.de" |
18 | // + eindeutig als Ursprung verlinkt und genannt werden |
||
1612 | dongfang | 19 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
20 | // + Keine Gewähr auf Fehlerfreiheit, Vollständigkeit oder Funktion |
||
21 | // + Benutzung auf eigene Gefahr |
||
22 | // + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden |
||
23 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
24 | // + Die Portierung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur |
||
25 | // + mit unserer Zustimmung zulässig |
||
26 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
27 | // + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen |
||
28 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
29 | // + Redistributions of source code (with or without modifications) must retain the above copyright notice, |
||
30 | // + this list of conditions and the following disclaimer. |
||
31 | // + * Neither the name of the copyright holders nor the names of contributors may be used to endorse or promote products derived |
||
32 | // + from this software without specific prior written permission. |
||
33 | // + * The use of this project (hardware, software, binary files, sources and documentation) is only permittet |
||
34 | // + for non-commercial use (directly or indirectly) |
||
1868 | - | 35 | // + Commercial use (for example: selling of MikroKopters, selling of PCBs, assembly, ...) is only permitted |
1612 | dongfang | 36 | // + with our written permission |
37 | // + * If sources or documentations are redistributet on other webpages, out webpage (http://www.MikroKopter.de) must be |
||
38 | // + clearly linked as origin |
||
39 | // + * porting to systems other than hardware from www.mikrokopter.de is not allowed |
||
40 | // + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
||
41 | // + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
||
42 | // + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
||
43 | // + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
||
44 | // + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
||
45 | // + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
||
46 | // + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
||
1963 | - | 47 | // + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
48 | // + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
||
1612 | dongfang | 49 | // + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
50 | // + POSSIBILITY OF SUCH DAMAGE. |
||
51 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
52 | #include <avr/io.h> |
||
53 | #include <avr/interrupt.h> |
||
54 | #include <avr/pgmspace.h> |
||
1864 | - | 55 | |
1612 | dongfang | 56 | #include "analog.h" |
1864 | - | 57 | #include "attitude.h" |
1612 | dongfang | 58 | #include "sensors.h" |
1964 | - | 59 | #include "printf_P.h" |
1612 | dongfang | 60 | |
61 | // for Delay functions |
||
62 | #include "timer0.h" |
||
63 | |||
1955 | - | 64 | // For debugOut |
1612 | dongfang | 65 | #include "uart0.h" |
66 | |||
67 | // For reading and writing acc. meter offsets. |
||
68 | #include "eeprom.h" |
||
69 | |||
1955 | - | 70 | // For debugOut.digital |
1796 | - | 71 | #include "output.h" |
72 | |||
1952 | - | 73 | // set ADC enable & ADC Start Conversion & ADC Interrupt Enable bit |
74 | #define startADC() (ADCSRA |= (1<<ADEN)|(1<<ADSC)|(1<<ADIE)) |
||
75 | |||
1969 | - | 76 | const char* recal = ", recalibration needed."; |
77 | |||
1854 | - | 78 | /* |
79 | * For each A/D conversion cycle, each analog channel is sampled a number of times |
||
80 | * (see array channelsForStates), and the results for each channel are summed. |
||
1645 | - | 81 | * Here are those for the gyros and the acc. meters. They are not zero-offset. |
1612 | dongfang | 82 | * They are exported in the analog.h file - but please do not use them! The only |
83 | * reason for the export is that the ENC-03_FC1.3 modules needs them for calibrating |
||
84 | * the offsets with the DAC. |
||
85 | */ |
||
1952 | - | 86 | volatile uint16_t sensorInputs[8]; |
2015 | - | 87 | int16_t acc[3]; |
88 | int16_t filteredAcc[3] = { 0,0,0 }; |
||
1612 | dongfang | 89 | |
90 | /* |
||
1645 | - | 91 | * These 4 exported variables are zero-offset. The "PID" ones are used |
92 | * in the attitude control as rotation rates. The "ATT" ones are for |
||
1854 | - | 93 | * integration to angles. |
1612 | dongfang | 94 | */ |
2015 | - | 95 | int16_t gyro_PID[2]; |
96 | int16_t gyro_ATT[2]; |
||
97 | int16_t gyroD[2]; |
||
98 | int16_t yawGyro; |
||
1612 | dongfang | 99 | |
100 | /* |
||
101 | * Offset values. These are the raw gyro and acc. meter sums when the copter is |
||
102 | * standing still. They are used for adjusting the gyro and acc. meter values |
||
1645 | - | 103 | * to be centered on zero. |
1612 | dongfang | 104 | */ |
105 | |||
1969 | - | 106 | sensorOffset_t gyroOffset; |
107 | sensorOffset_t accOffset; |
||
108 | sensorOffset_t gyroAmplifierOffset; |
||
1960 | - | 109 | |
1612 | dongfang | 110 | /* |
2015 | - | 111 | * In the MK coordinate system, nose-down is positive and left-roll is positive. |
112 | * If a sensor is used in an orientation where one but not both of the axes has |
||
113 | * an opposite sign, PR_ORIENTATION_REVERSED is set to 1 (true). |
||
114 | * Transform: |
||
115 | * pitch <- pp*pitch + pr*roll |
||
116 | * roll <- rp*pitch + rr*roll |
||
117 | * Not reversed, GYRO_QUADRANT: |
||
118 | * 0: pp=1, pr=0, rp=0, rr=1 // 0 degrees |
||
119 | * 1: pp=1, pr=-1,rp=1, rr=1 // +45 degrees |
||
120 | * 2: pp=0, pr=-1,rp=1, rr=0 // +90 degrees |
||
121 | * 3: pp=-1,pr=-1,rp=1, rr=1 // +135 degrees |
||
122 | * 4: pp=-1,pr=0, rp=0, rr=-1 // +180 degrees |
||
123 | * 5: pp=-1,pr=1, rp=-1,rr=-1 // +225 degrees |
||
124 | * 6: pp=0, pr=1, rp=-1,rr=0 // +270 degrees |
||
125 | * 7: pp=1, pr=1, rp=-1,rr=1 // +315 degrees |
||
126 | * Reversed, GYRO_QUADRANT: |
||
127 | * 0: pp=-1,pr=0, rp=0, rr=1 // 0 degrees with pitch reversed |
||
128 | * 1: pp=-1,pr=-1,rp=-1,rr=1 // +45 degrees with pitch reversed |
||
129 | * 2: pp=0, pr=-1,rp=-1,rr=0 // +90 degrees with pitch reversed |
||
130 | * 3: pp=1, pr=-1,rp=-1,rr=1 // +135 degrees with pitch reversed |
||
131 | * 4: pp=1, pr=0, rp=0, rr=-1 // +180 degrees with pitch reversed |
||
132 | * 5: pp=1, pr=1, rp=1, rr=-1 // +225 degrees with pitch reversed |
||
133 | * 6: pp=0, pr=1, rp=1, rr=0 // +270 degrees with pitch reversed |
||
134 | * 7: pp=-1,pr=1, rp=1, rr=1 // +315 degrees with pitch reversed |
||
1612 | dongfang | 135 | */ |
136 | |||
2019 | - | 137 | //void rotate(int16_t* result, uint8_t quadrant, uint8_t reverse) {} |
2017 | - | 138 | |
2015 | - | 139 | void rotate(int16_t* result, uint8_t quadrant, uint8_t reverse) { |
140 | static const int8_t rotationTab[] = {1,1,0,-1,-1,-1,0,1}; |
||
141 | // Pitch to Pitch part |
||
142 | int8_t xx = (reverse & 1) ? rotationTab[(quadrant+4)%8] : rotationTab[quadrant]; |
||
143 | // Roll to Pitch part |
||
144 | int8_t xy = rotationTab[(quadrant+2)%8]; |
||
145 | // Pitch to Roll part |
||
146 | int8_t yx = reverse ? rotationTab[(quadrant+2)%8] : rotationTab[(quadrant+6)%8]; |
||
147 | // Roll to Roll part |
||
148 | int8_t yy = rotationTab[quadrant]; |
||
149 | |||
150 | int16_t xIn = result[0]; |
||
2019 | - | 151 | result[0] = xx*xIn + xy*result[1]; |
2015 | - | 152 | result[1] = yx*xIn + yy*result[1]; |
153 | |||
154 | if (quadrant & 1) { |
||
155 | // A rotation was used above, where the factors were too large by sqrt(2). |
||
156 | // So, we multiply by 2^n/sqt(2) and right shift n bits, as to divide by sqrt(2). |
||
157 | // A suitable value for n: Sample is 11 bits. After transformation it is the sum |
||
158 | // of 2 11 bit numbers, so 12 bits. We have 4 bits left... |
||
159 | result[0] = (result[0]*11) >> 4; |
||
160 | result[1] = (result[1]*11) >> 4; |
||
161 | } |
||
162 | } |
||
2019 | - | 163 | |
1645 | - | 164 | /* |
1775 | - | 165 | * Air pressure |
1645 | - | 166 | */ |
1970 | - | 167 | volatile uint8_t rangewidth = 105; |
1612 | dongfang | 168 | |
1775 | - | 169 | // Direct from sensor, irrespective of range. |
170 | // volatile uint16_t rawAirPressure; |
||
171 | |||
172 | // Value of 2 samples, with range. |
||
2015 | - | 173 | uint16_t simpleAirPressure; |
1775 | - | 174 | |
2019 | - | 175 | // Value of AIRPRESSURE_OVERSAMPLING samples, with range, filtered. |
2015 | - | 176 | int32_t filteredAirPressure; |
1775 | - | 177 | |
178 | // Partial sum of AIRPRESSURE_SUMMATION_FACTOR samples. |
||
2015 | - | 179 | int32_t airPressureSum; |
1775 | - | 180 | |
181 | // The number of samples summed into airPressureSum so far. |
||
2015 | - | 182 | uint8_t pressureMeasurementCount; |
1775 | - | 183 | |
1612 | dongfang | 184 | /* |
1854 | - | 185 | * Battery voltage, in units of: 1k/11k / 3V * 1024 = 31.03 per volt. |
1612 | dongfang | 186 | * That is divided by 3 below, for a final 10.34 per volt. |
187 | * So the initial value of 100 is for 9.7 volts. |
||
188 | */ |
||
2015 | - | 189 | int16_t UBat = 100; |
1612 | dongfang | 190 | |
191 | /* |
||
192 | * Control and status. |
||
193 | */ |
||
194 | volatile uint16_t ADCycleCount = 0; |
||
195 | volatile uint8_t analogDataReady = 1; |
||
196 | |||
197 | /* |
||
198 | * Experiment: Measuring vibration-induced sensor noise. |
||
199 | */ |
||
2015 | - | 200 | uint16_t gyroNoisePeak[3]; |
201 | uint16_t accNoisePeak[3]; |
||
1612 | dongfang | 202 | |
1986 | - | 203 | volatile uint8_t adState; |
1987 | - | 204 | volatile uint8_t adChannel; |
1986 | - | 205 | |
1612 | dongfang | 206 | // ADC channels |
1645 | - | 207 | #define AD_GYRO_YAW 0 |
208 | #define AD_GYRO_ROLL 1 |
||
1634 | - | 209 | #define AD_GYRO_PITCH 2 |
210 | #define AD_AIRPRESSURE 3 |
||
1645 | - | 211 | #define AD_UBAT 4 |
212 | #define AD_ACC_Z 5 |
||
213 | #define AD_ACC_ROLL 6 |
||
214 | #define AD_ACC_PITCH 7 |
||
1612 | dongfang | 215 | |
216 | /* |
||
217 | * Table of AD converter inputs for each state. |
||
1854 | - | 218 | * The number of samples summed for each channel is equal to |
1612 | dongfang | 219 | * the number of times the channel appears in the array. |
220 | * The max. number of samples that can be taken in 2 ms is: |
||
1854 | - | 221 | * 20e6 / 128 / 13 / (1/2e-3) = 24. Since the main control |
222 | * loop needs a little time between reading AD values and |
||
1612 | dongfang | 223 | * re-enabling ADC, the real limit is (how much?) lower. |
224 | * The acc. sensor is sampled even if not used - or installed |
||
225 | * at all. The cost is not significant. |
||
226 | */ |
||
227 | |||
1870 | - | 228 | const uint8_t channelsForStates[] PROGMEM = { |
229 | AD_GYRO_PITCH, AD_GYRO_ROLL, AD_GYRO_YAW, |
||
230 | AD_ACC_PITCH, AD_ACC_ROLL, AD_AIRPRESSURE, |
||
1612 | dongfang | 231 | |
1870 | - | 232 | AD_GYRO_PITCH, AD_GYRO_ROLL, AD_ACC_Z, // at 8, measure Z acc. |
233 | AD_GYRO_PITCH, AD_GYRO_ROLL, AD_GYRO_YAW, // at 11, finish yaw gyro |
||
234 | |||
235 | AD_ACC_PITCH, // at 12, finish pitch axis acc. |
||
236 | AD_ACC_ROLL, // at 13, finish roll axis acc. |
||
237 | AD_AIRPRESSURE, // at 14, finish air pressure. |
||
238 | |||
239 | AD_GYRO_PITCH, // at 15, finish pitch gyro |
||
240 | AD_GYRO_ROLL, // at 16, finish roll gyro |
||
241 | AD_UBAT // at 17, measure battery. |
||
242 | }; |
||
1612 | dongfang | 243 | |
244 | // Feature removed. Could be reintroduced later - but should work for all gyro types then. |
||
245 | // uint8_t GyroDefectPitch = 0, GyroDefectRoll = 0, GyroDefectYaw = 0; |
||
246 | |||
247 | void analog_init(void) { |
||
1821 | - | 248 | uint8_t sreg = SREG; |
249 | // disable all interrupts before reconfiguration |
||
250 | cli(); |
||
1612 | dongfang | 251 | |
1821 | - | 252 | //ADC0 ... ADC7 is connected to PortA pin 0 ... 7 |
253 | DDRA = 0x00; |
||
254 | PORTA = 0x00; |
||
255 | // Digital Input Disable Register 0 |
||
256 | // Disable digital input buffer for analog adc_channel pins |
||
257 | DIDR0 = 0xFF; |
||
258 | // external reference, adjust data to the right |
||
1952 | - | 259 | ADMUX &= ~((1<<REFS1)|(1<<REFS0)|(1<<ADLAR)); |
1821 | - | 260 | // set muxer to ADC adc_channel 0 (0 to 7 is a valid choice) |
1987 | - | 261 | ADMUX = (ADMUX & 0xE0); |
1821 | - | 262 | //Set ADC Control and Status Register A |
263 | //Auto Trigger Enable, Prescaler Select Bits to Division Factor 128, i.e. ADC clock = SYSCKL/128 = 156.25 kHz |
||
1952 | - | 264 | ADCSRA = (1<<ADPS2)|(1<<ADPS1)|(1<<ADPS0); |
1821 | - | 265 | //Set ADC Control and Status Register B |
266 | //Trigger Source to Free Running Mode |
||
1952 | - | 267 | ADCSRB &= ~((1<<ADTS2)|(1<<ADTS1)|(1<<ADTS0)); |
268 | |||
269 | startAnalogConversionCycle(); |
||
270 | |||
1821 | - | 271 | // restore global interrupt flags |
272 | SREG = sreg; |
||
1612 | dongfang | 273 | } |
274 | |||
2015 | - | 275 | uint16_t rawGyroValue(uint8_t axis) { |
276 | return sensorInputs[AD_GYRO_PITCH-axis]; |
||
277 | } |
||
278 | |||
279 | uint16_t rawAccValue(uint8_t axis) { |
||
280 | return sensorInputs[AD_ACC_PITCH-axis]; |
||
281 | } |
||
282 | |||
1821 | - | 283 | void measureNoise(const int16_t sensor, |
284 | volatile uint16_t* const noiseMeasurement, const uint8_t damping) { |
||
285 | if (sensor > (int16_t) (*noiseMeasurement)) { |
||
286 | *noiseMeasurement = sensor; |
||
287 | } else if (-sensor > (int16_t) (*noiseMeasurement)) { |
||
288 | *noiseMeasurement = -sensor; |
||
289 | } else if (*noiseMeasurement > damping) { |
||
290 | *noiseMeasurement -= damping; |
||
291 | } else { |
||
292 | *noiseMeasurement = 0; |
||
293 | } |
||
1612 | dongfang | 294 | } |
295 | |||
1796 | - | 296 | /* |
297 | * Min.: 0 |
||
298 | * Max: About 106 * 240 + 2047 = 27487; it is OK with just a 16 bit type. |
||
299 | */ |
||
1775 | - | 300 | uint16_t getSimplePressure(int advalue) { |
1821 | - | 301 | return (uint16_t) OCR0A * (uint16_t) rangewidth + advalue; |
1634 | - | 302 | } |
303 | |||
1952 | - | 304 | void startAnalogConversionCycle(void) { |
1960 | - | 305 | analogDataReady = 0; |
2017 | - | 306 | |
1952 | - | 307 | // Stop the sampling. Cycle is over. |
308 | for (uint8_t i = 0; i < 8; i++) { |
||
309 | sensorInputs[i] = 0; |
||
310 | } |
||
1986 | - | 311 | adState = 0; |
1987 | - | 312 | adChannel = AD_GYRO_PITCH; |
313 | ADMUX = (ADMUX & 0xE0) | adChannel; |
||
1952 | - | 314 | startADC(); |
315 | } |
||
316 | |||
1645 | - | 317 | /***************************************************** |
1854 | - | 318 | * Interrupt Service Routine for ADC |
1963 | - | 319 | * Runs at 312.5 kHz or 3.2 �s. When all states are |
1952 | - | 320 | * processed further conversions are stopped. |
1645 | - | 321 | *****************************************************/ |
1870 | - | 322 | ISR(ADC_vect) { |
1986 | - | 323 | sensorInputs[adChannel] += ADC; |
1952 | - | 324 | // set up for next state. |
1986 | - | 325 | adState++; |
326 | if (adState < sizeof(channelsForStates)) { |
||
327 | adChannel = pgm_read_byte(&channelsForStates[adState]); |
||
328 | // set adc muxer to next adChannel |
||
329 | ADMUX = (ADMUX & 0xE0) | adChannel; |
||
1952 | - | 330 | // after full cycle stop further interrupts |
331 | startADC(); |
||
332 | } else { |
||
333 | ADCycleCount++; |
||
334 | analogDataReady = 1; |
||
335 | // do not restart ADC converter. |
||
336 | } |
||
337 | } |
||
1612 | dongfang | 338 | |
1952 | - | 339 | void analog_updateGyros(void) { |
340 | // for various filters... |
||
2015 | - | 341 | int16_t tempOffsetGyro[2], tempGyro; |
1952 | - | 342 | |
1991 | - | 343 | debugOut.digital[0] &= ~DEBUG_SENSORLIMIT; |
1952 | - | 344 | for (uint8_t axis=0; axis<2; axis++) { |
2015 | - | 345 | tempGyro = rawGyroValue(axis); |
1952 | - | 346 | /* |
347 | * Process the gyro data for the PID controller. |
||
348 | */ |
||
349 | // 1) Extrapolate: Near the ends of the range, we boost the input significantly. This simulates a |
||
350 | // gyro with a wider range, and helps counter saturation at full control. |
||
351 | |||
1960 | - | 352 | if (staticParams.bitConfig & CFG_GYRO_SATURATION_PREVENTION) { |
1952 | - | 353 | if (tempGyro < SENSOR_MIN_PITCHROLL) { |
2015 | - | 354 | debugOut.digital[0] |= DEBUG_SENSORLIMIT; |
355 | tempGyro = tempGyro * EXTRAPOLATION_SLOPE - EXTRAPOLATION_LIMIT; |
||
1952 | - | 356 | } else if (tempGyro > SENSOR_MAX_PITCHROLL) { |
2015 | - | 357 | debugOut.digital[0] |= DEBUG_SENSORLIMIT; |
358 | tempGyro = (tempGyro - SENSOR_MAX_PITCHROLL) * EXTRAPOLATION_SLOPE + SENSOR_MAX_PITCHROLL; |
||
1952 | - | 359 | } |
360 | } |
||
2015 | - | 361 | |
1952 | - | 362 | // 2) Apply sign and offset, scale before filtering. |
2015 | - | 363 | tempOffsetGyro[axis] = (tempGyro - gyroOffset.offsets[axis]) * GYRO_FACTOR_PITCHROLL; |
364 | } |
||
365 | |||
366 | // 2.1: Transform axes. |
||
367 | rotate(tempOffsetGyro, staticParams.gyroQuadrant, staticParams.imuReversedFlags & 1); |
||
368 | |||
369 | for (uint8_t axis=0; axis<2; axis++) { |
||
370 | // 3) Filter. |
||
371 | tempOffsetGyro[axis] = (gyro_PID[axis] * (staticParams.gyroPIDFilterConstant - 1) + tempOffsetGyro[axis]) / staticParams.gyroPIDFilterConstant; |
||
372 | |||
1952 | - | 373 | // 4) Measure noise. |
2015 | - | 374 | measureNoise(tempOffsetGyro[axis], &gyroNoisePeak[axis], GYRO_NOISE_MEASUREMENT_DAMPING); |
375 | |||
1952 | - | 376 | // 5) Differential measurement. |
2015 | - | 377 | gyroD[axis] = (gyroD[axis] * (staticParams.gyroDFilterConstant - 1) + (tempOffsetGyro[axis] - gyro_PID[axis])) / staticParams.gyroDFilterConstant; |
378 | |||
1952 | - | 379 | // 6) Done. |
2015 | - | 380 | gyro_PID[axis] = tempOffsetGyro[axis]; |
381 | |||
382 | // Prepare tempOffsetGyro for next calculation below... |
||
383 | tempOffsetGyro[axis] = (rawGyroValue(axis) - gyroOffset.offsets[axis]) * GYRO_FACTOR_PITCHROLL; |
||
1952 | - | 384 | } |
385 | |||
2015 | - | 386 | /* |
387 | * Now process the data for attitude angles. |
||
388 | */ |
||
389 | rotate(tempOffsetGyro, staticParams.gyroQuadrant, staticParams.imuReversedFlags & 1); |
||
390 | |||
2017 | - | 391 | gyro_ATT[PITCH] = tempOffsetGyro[PITCH]; |
392 | gyro_ATT[ROLL] = tempOffsetGyro[ROLL]; |
||
393 | |||
394 | debugOut.analog[22 + 0] = gyro_PID[0]; |
||
395 | debugOut.analog[22 + 1] = gyro_PID[1]; |
||
396 | |||
397 | debugOut.analog[24 + 0] = gyro_ATT[0]; |
||
398 | debugOut.analog[24 + 1] = gyro_ATT[1]; |
||
399 | |||
2015 | - | 400 | // 2) Filter. This should really be quite unnecessary. The integration should gobble up any noise anyway and the values are not used for anything else. |
401 | // gyro_ATT[PITCH] = (gyro_ATT[PITCH] * (staticParams.attitudeGyroFilter - 1) + tempOffsetGyro[PITCH]) / staticParams.attitudeGyroFilter; |
||
402 | // gyro_ATT[ROLL] = (gyro_ATT[ROLL] * (staticParams.attitudeGyroFilter - 1) + tempOffsetGyro[ROLL]) / staticParams.attitudeGyroFilter; |
||
403 | |||
1952 | - | 404 | // Yaw gyro. |
2015 | - | 405 | if (staticParams.imuReversedFlags & 2) |
1960 | - | 406 | yawGyro = gyroOffset.offsets[YAW] - sensorInputs[AD_GYRO_YAW]; |
1952 | - | 407 | else |
1960 | - | 408 | yawGyro = sensorInputs[AD_GYRO_YAW] - gyroOffset.offsets[YAW]; |
1952 | - | 409 | } |
1775 | - | 410 | |
1952 | - | 411 | void analog_updateAccelerometers(void) { |
412 | // Pitch and roll axis accelerations. |
||
413 | for (uint8_t axis=0; axis<2; axis++) { |
||
2015 | - | 414 | acc[axis] = rawAccValue(axis) - accOffset.offsets[axis]; |
1979 | - | 415 | } |
2015 | - | 416 | |
417 | rotate(acc, staticParams.accQuadrant, staticParams.imuReversedFlags & 4); |
||
418 | |||
419 | for(uint8_t axis=0; axis<3; axis++) { |
||
1960 | - | 420 | filteredAcc[axis] = (filteredAcc[axis] * (staticParams.accFilterConstant - 1) + acc[axis]) / staticParams.accFilterConstant; |
1952 | - | 421 | measureNoise(acc[axis], &accNoisePeak[axis], 1); |
422 | } |
||
2015 | - | 423 | |
424 | // Z acc. |
||
425 | if (staticParams.imuReversedFlags & 8) |
||
426 | acc[Z] = accOffset.offsets[Z] - sensorInputs[AD_ACC_Z]; |
||
427 | else |
||
428 | acc[Z] = sensorInputs[AD_ACC_Z] - accOffset.offsets[Z]; |
||
1952 | - | 429 | } |
1645 | - | 430 | |
1952 | - | 431 | void analog_updateAirPressure(void) { |
432 | static uint16_t pressureAutorangingWait = 25; |
||
433 | uint16_t rawAirPressure; |
||
434 | int16_t newrange; |
||
435 | // air pressure |
||
436 | if (pressureAutorangingWait) { |
||
437 | //A range switch was done recently. Wait for steadying. |
||
438 | pressureAutorangingWait--; |
||
1955 | - | 439 | debugOut.analog[27] = (uint16_t) OCR0A; |
440 | debugOut.analog[31] = simpleAirPressure; |
||
1952 | - | 441 | } else { |
442 | rawAirPressure = sensorInputs[AD_AIRPRESSURE]; |
||
443 | if (rawAirPressure < MIN_RAWPRESSURE) { |
||
444 | // value is too low, so decrease voltage on the op amp minus input, making the value higher. |
||
445 | newrange = OCR0A - (MAX_RAWPRESSURE - MIN_RAWPRESSURE) / (rangewidth * 4); // 4; // (MAX_RAWPRESSURE - rawAirPressure) / (rangewidth * 2) + 1; |
||
446 | if (newrange > MIN_RANGES_EXTRAPOLATION) { |
||
447 | pressureAutorangingWait = (OCR0A - newrange) * AUTORANGE_WAIT_FACTOR; // = OCRA0 - OCRA0 + |
||
448 | OCR0A = newrange; |
||
449 | } else { |
||
450 | if (OCR0A) { |
||
451 | OCR0A--; |
||
452 | pressureAutorangingWait = AUTORANGE_WAIT_FACTOR; |
||
1821 | - | 453 | } |
1952 | - | 454 | } |
455 | } else if (rawAirPressure > MAX_RAWPRESSURE) { |
||
456 | // value is too high, so increase voltage on the op amp minus input, making the value lower. |
||
457 | // If near the end, make a limited increase |
||
458 | newrange = OCR0A + (MAX_RAWPRESSURE - MIN_RAWPRESSURE) / (rangewidth * 4); // 4; // (rawAirPressure - MIN_RAWPRESSURE) / (rangewidth * 2) - 1; |
||
459 | if (newrange < MAX_RANGES_EXTRAPOLATION) { |
||
460 | pressureAutorangingWait = (newrange - OCR0A) * AUTORANGE_WAIT_FACTOR; |
||
461 | OCR0A = newrange; |
||
462 | } else { |
||
463 | if (OCR0A < 254) { |
||
464 | OCR0A++; |
||
465 | pressureAutorangingWait = AUTORANGE_WAIT_FACTOR; |
||
466 | } |
||
467 | } |
||
468 | } |
||
469 | |||
470 | // Even if the sample is off-range, use it. |
||
471 | simpleAirPressure = getSimplePressure(rawAirPressure); |
||
1955 | - | 472 | debugOut.analog[27] = (uint16_t) OCR0A; |
473 | debugOut.analog[31] = simpleAirPressure; |
||
1952 | - | 474 | |
475 | if (simpleAirPressure < MIN_RANGES_EXTRAPOLATION * rangewidth) { |
||
476 | // Danger: pressure near lower end of range. If the measurement saturates, the |
||
477 | // copter may climb uncontrolledly... Simulate a drastic reduction in pressure. |
||
1955 | - | 478 | debugOut.digital[1] |= DEBUG_SENSORLIMIT; |
1952 | - | 479 | airPressureSum += (int16_t) MIN_RANGES_EXTRAPOLATION * rangewidth |
480 | + (simpleAirPressure - (int16_t) MIN_RANGES_EXTRAPOLATION |
||
481 | * rangewidth) * PRESSURE_EXTRAPOLATION_COEFF; |
||
482 | } else if (simpleAirPressure > MAX_RANGES_EXTRAPOLATION * rangewidth) { |
||
483 | // Danger: pressure near upper end of range. If the measurement saturates, the |
||
484 | // copter may descend uncontrolledly... Simulate a drastic increase in pressure. |
||
1955 | - | 485 | debugOut.digital[1] |= DEBUG_SENSORLIMIT; |
1952 | - | 486 | airPressureSum += (int16_t) MAX_RANGES_EXTRAPOLATION * rangewidth |
487 | + (simpleAirPressure - (int16_t) MAX_RANGES_EXTRAPOLATION |
||
488 | * rangewidth) * PRESSURE_EXTRAPOLATION_COEFF; |
||
489 | } else { |
||
490 | // normal case. |
||
491 | // If AIRPRESSURE_SUMMATION_FACTOR is an odd number we only want to add half the double sample. |
||
492 | // The 2 cases above (end of range) are ignored for this. |
||
1955 | - | 493 | debugOut.digital[1] &= ~DEBUG_SENSORLIMIT; |
2019 | - | 494 | if (pressureMeasurementCount == AIRPRESSURE_OVERSAMPLING - 1) |
1952 | - | 495 | airPressureSum += simpleAirPressure / 2; |
496 | else |
||
497 | airPressureSum += simpleAirPressure; |
||
498 | } |
||
499 | |||
500 | // 2 samples were added. |
||
501 | pressureMeasurementCount += 2; |
||
2019 | - | 502 | if (pressureMeasurementCount >= AIRPRESSURE_OVERSAMPLING) { |
1952 | - | 503 | filteredAirPressure = (filteredAirPressure * (AIRPRESSURE_FILTER - 1) |
504 | + airPressureSum + AIRPRESSURE_FILTER / 2) / AIRPRESSURE_FILTER; |
||
505 | pressureMeasurementCount = airPressureSum = 0; |
||
506 | } |
||
507 | } |
||
508 | } |
||
1821 | - | 509 | |
1952 | - | 510 | void analog_updateBatteryVoltage(void) { |
511 | // Battery. The measured value is: (V * 1k/11k)/3v * 1024 = 31.03 counts per volt (max. measurable is 33v). |
||
512 | // This is divided by 3 --> 10.34 counts per volt. |
||
513 | UBat = (3 * UBat + sensorInputs[AD_UBAT] / 3) / 4; |
||
1955 | - | 514 | debugOut.analog[11] = UBat; |
1952 | - | 515 | } |
1821 | - | 516 | |
1952 | - | 517 | void analog_update(void) { |
518 | analog_updateGyros(); |
||
519 | analog_updateAccelerometers(); |
||
520 | analog_updateAirPressure(); |
||
521 | analog_updateBatteryVoltage(); |
||
1612 | dongfang | 522 | } |
523 | |||
1961 | - | 524 | void analog_setNeutral() { |
2018 | - | 525 | gyro_init(); |
526 | |||
1961 | - | 527 | if (gyroOffset_readFromEEProm()) { |
1969 | - | 528 | printf("gyro offsets invalid%s",recal); |
2019 | - | 529 | gyroOffset.offsets[PITCH] = gyroOffset.offsets[ROLL] = 512 * GYRO_OVERSAMPLING_PITCHROLL; |
530 | gyroOffset.offsets[YAW] = 512 * GYRO_OVERSAMPLING_YAW; |
||
1961 | - | 531 | } |
1964 | - | 532 | |
1961 | - | 533 | if (accOffset_readFromEEProm()) { |
1969 | - | 534 | printf("acc. meter offsets invalid%s",recal); |
2019 | - | 535 | accOffset.offsets[PITCH] = accOffset.offsets[ROLL] = 512 * ACC_OVERSAMPLING_XY; |
536 | accOffset.offsets[Z] = 717 * ACC_OVERSAMPLING_Z; |
||
1961 | - | 537 | } |
538 | |||
539 | // Noise is relative to offset. So, reset noise measurements when changing offsets. |
||
540 | gyroNoisePeak[PITCH] = gyroNoisePeak[ROLL] = 0; |
||
541 | accNoisePeak[PITCH] = accNoisePeak[ROLL] = 0; |
||
542 | |||
543 | // Setting offset values has an influence in the analog.c ISR |
||
544 | // Therefore run measurement for 100ms to achive stable readings |
||
2015 | - | 545 | delay_ms_with_adc_measurement(100, 0); |
1961 | - | 546 | |
547 | // Rough estimate. Hmm no nothing happens at calibration anyway. |
||
2019 | - | 548 | // airPressureSum = simpleAirPressure * (AIRPRESSURE_OVERSAMPLING/2); |
1961 | - | 549 | // pressureMeasurementCount = 0; |
550 | } |
||
551 | |||
552 | void analog_calibrateGyros(void) { |
||
1612 | dongfang | 553 | #define GYRO_OFFSET_CYCLES 32 |
1952 | - | 554 | uint8_t i, axis; |
1963 | - | 555 | int32_t offsets[3] = { 0, 0, 0 }; |
1952 | - | 556 | gyro_calibrate(); |
557 | |||
558 | // determine gyro bias by averaging (requires that the copter does not rotate around any axis!) |
||
559 | for (i = 0; i < GYRO_OFFSET_CYCLES; i++) { |
||
2015 | - | 560 | delay_ms_with_adc_measurement(10, 1); |
1952 | - | 561 | for (axis = PITCH; axis <= YAW; axis++) { |
2015 | - | 562 | offsets[axis] += rawGyroValue(axis); |
1952 | - | 563 | } |
564 | } |
||
565 | |||
566 | for (axis = PITCH; axis <= YAW; axis++) { |
||
1963 | - | 567 | gyroOffset.offsets[axis] = (offsets[axis] + GYRO_OFFSET_CYCLES / 2) / GYRO_OFFSET_CYCLES; |
2018 | - | 568 | |
2019 | - | 569 | int16_t min = (512-200) * (axis==YAW) ? GYRO_OVERSAMPLING_YAW : GYRO_OVERSAMPLING_PITCHROLL; |
570 | int16_t max = (512+200) * (axis==YAW) ? GYRO_OVERSAMPLING_YAW : GYRO_OVERSAMPLING_PITCHROLL; |
||
2018 | - | 571 | if(gyroOffset.offsets[axis] < min || gyroOffset.offsets[axis] > max) |
572 | versionInfo.hardwareErrors[0] |= FC_ERROR0_GYRO_PITCH << axis; |
||
1952 | - | 573 | } |
1961 | - | 574 | |
575 | gyroOffset_writeToEEProm(); |
||
2015 | - | 576 | startAnalogConversionCycle(); |
1612 | dongfang | 577 | } |
578 | |||
579 | /* |
||
580 | * Find acc. offsets for a neutral reading, and write them to EEPROM. |
||
581 | * Does not (!} update the local variables. This must be done with a |
||
582 | * call to analog_calibrate() - this always (?) is done by the caller |
||
583 | * anyway. There would be nothing wrong with updating the variables |
||
584 | * directly from here, though. |
||
585 | */ |
||
586 | void analog_calibrateAcc(void) { |
||
2015 | - | 587 | #define ACC_OFFSET_CYCLES 32 |
1960 | - | 588 | uint8_t i, axis; |
2015 | - | 589 | int32_t offsets[3] = { 0, 0, 0 }; |
590 | |||
1960 | - | 591 | for (i = 0; i < ACC_OFFSET_CYCLES; i++) { |
2015 | - | 592 | delay_ms_with_adc_measurement(10, 1); |
1960 | - | 593 | for (axis = PITCH; axis <= YAW; axis++) { |
2015 | - | 594 | offsets[axis] += rawAccValue(axis); |
1960 | - | 595 | } |
596 | } |
||
2015 | - | 597 | |
1960 | - | 598 | for (axis = PITCH; axis <= YAW; axis++) { |
2015 | - | 599 | accOffset.offsets[axis] = (offsets[axis] + ACC_OFFSET_CYCLES / 2) / ACC_OFFSET_CYCLES; |
2018 | - | 600 | int16_t min,max; |
601 | if (axis==Z) { |
||
602 | if (staticParams.imuReversedFlags & 8) { |
||
603 | // TODO: This assumes a sensitivity of +/- 2g. |
||
2019 | - | 604 | min = (256-200) * ACC_OVERSAMPLING_Z; |
605 | max = (256+200) * ACC_OVERSAMPLING_Z; |
||
2018 | - | 606 | } else { |
607 | // TODO: This assumes a sensitivity of +/- 2g. |
||
2019 | - | 608 | min = (768-200) * ACC_OVERSAMPLING_Z; |
609 | max = (768+200) * ACC_OVERSAMPLING_Z; |
||
2018 | - | 610 | } |
611 | } else { |
||
2019 | - | 612 | min = (512-200) * ACC_OVERSAMPLING_XY; |
613 | max = (512+200) * ACC_OVERSAMPLING_XY; |
||
2018 | - | 614 | } |
615 | if(gyroOffset.offsets[axis] < min || gyroOffset.offsets[axis] > max) { |
||
616 | versionInfo.hardwareErrors[0] |= FC_ERROR0_ACC_X << axis; |
||
617 | } |
||
1960 | - | 618 | } |
1961 | - | 619 | |
2015 | - | 620 | accOffset_writeToEEProm(); |
621 | startAnalogConversionCycle(); |
||
1612 | dongfang | 622 | } |