Subversion Repositories FlightCtrl

Rev

Rev 2116 | Go to most recent revision | Details | Compare with Previous | Last modification | View Log | RSS feed

Rev Author Line No. Line
2108 - 1 
#ifndef EEMEM
2 
#define EEMEM __attribute__ ((section (".eeprom")))
3 
#endif
4 
 
5 
#include "eeprom.h"
6 
#include "printf_P.h"
7 
#include "output.h"
8 
#include <avr/wdt.h>
9 
#include <avr/eeprom.h>
10 
 
11 
// byte array in eeprom
12 
uint8_t EEPromArray[E2END + 1] EEMEM;
13 
 
14 
/***************************************************/
15 
/*       Read Parameter from EEPROM as byte        */
16 
/***************************************************/
17 
uint8_t getParamByte(uint16_t param_id) {
18 
  return eeprom_read_byte(&EEPromArray[EEPROM_ADR_PARAM_BEGIN + param_id]);
19 
}
20 
 
21 
/***************************************************/
22 
/*       Write Parameter to EEPROM as byte         */
23 
/***************************************************/
24 
void setParamByte(uint16_t param_id, uint8_t value) {
25 
  eeprom_write_byte(&EEPromArray[EEPROM_ADR_PARAM_BEGIN + param_id], value);
26 
}
27 
 
28 
/***************************************************/
29 
/*       Read Parameter from EEPROM as word        */
30 
/***************************************************/
31 
/*
32 
uint16_t getParamWord(uint16_t param_id) {
33 
  return eeprom_read_word((uint16_t *) &EEPromArray[EEPROM_ADR_PARAM_BEGIN
34 
                                                    + param_id]);
35 
}
36 
*/
37 
 
38 
/***************************************************/
39 
/*       Write Parameter to EEPROM as word         */
40 
/***************************************************/
41 
/*
42 
void setParamWord(uint16_t param_id, uint16_t value) {
43 
  eeprom_write_word((uint16_t *) &EEPromArray[EEPROM_ADR_PARAM_BEGIN + param_id], value);
44 
}
45 
*/
46 
 
47 
uint16_t CRC16(uint8_t* data, uint16_t length) {
48 
  uint16_t crc = 0;
49 
  for (uint16_t i=0; i<length; i++) {
50 
    crc  = (uint8_t)(crc >> 8) | (crc << 8);
51 
    crc ^= data[i];
52 
    crc ^= (uint8_t)(crc & 0xff) >> 4;
53 
    crc ^= (crc << 8) << 4;
54 
    crc ^= ((crc & 0xff) << 4) << 1;
55 
  }
56 
  return crc;
57 
}
58 
 
59 
// offset is where the checksum is stored, offset+1 is the revision number, and offset+2... are the data.
60 
// length is the length of the pure data not including checksum and revision number.
61 
void writeChecksummedBlock(uint8_t revisionNumber, uint8_t* data, uint16_t offset, uint16_t length) {
62 
  uint16_t CRC = CRC16(data, length);
63 
  eeprom_write_byte(&EEPromArray[offset], CRC&0xff);
64 
  eeprom_write_byte(&EEPromArray[offset+1], CRC>>8);
65 
  eeprom_write_byte(&EEPromArray[offset+2], revisionNumber);
66 
  eeprom_write_block(data, &EEPromArray[offset+3], length);
67 
}
68 
 
69 
// offset is where the checksum is stored, offset+1 is the revision number, and offset+2... are the data.
70 
// length is the length of the pure data not including checksum and revision number.
71 
uint8_t readChecksummedBlock(uint8_t revisionNumber, uint8_t* target, uint16_t offset, uint16_t length) {
72 
  uint16_t CRCRead = eeprom_read_byte(&EEPromArray[offset]) | (eeprom_read_byte(&EEPromArray[offset+1])<<8);
73 
  uint8_t revisionNumberRead = eeprom_read_byte(&EEPromArray[offset+2]);
74 
  eeprom_read_block(target, &EEPromArray[offset+3], length);
75 
  uint16_t CRCCalculated = CRC16(target, length);
76 
 
77 
  uint8_t CRCError = (CRCRead != CRCCalculated);
78 
  uint8_t revisionMismatch = (revisionNumber != revisionNumberRead);
79 
 
80 
  if (CRCError && revisionMismatch) printf("\n\rEEPROM CRC error and revision mismatch; ");
81 
  else if (CRCError) printf("\n\rEEPROM CRC error; ");
82 
  else if (revisionMismatch) printf("\n\rEEPROM revision mismatch; ");
83 
  return (CRCError || revisionMismatch);
84 
}
85 
 
86 
/***************************************************/
87 
/*       Read Parameter Set from EEPROM            */
88 
/***************************************************/
89 
// setnumber [1..5]
90 
uint8_t paramSet_readFromEEProm(uint8_t setnumber) {
91 
  uint16_t offset = EEPROM_ADR_PARAMSET_BEGIN + (setnumber-1)*(sizeof(ParamSet_t)+EEPROM_CHECKSUMMED_BLOCK_OVERHEAD);
92 
  uint8_t result = readChecksummedBlock(EEPARAM_REVISION, (uint8_t*)&staticParams, offset, sizeof(ParamSet_t));
93 
  configuration_paramSetDidChange();
94 
  return result;
95 
}
96 
 
97 
/***************************************************/
98 
/*        Write Parameter Set to EEPROM            */
99 
/***************************************************/
100 
void paramSet_writeToEEProm(uint8_t setnumber) {
101 
  uint16_t offset = EEPROM_ADR_PARAMSET_BEGIN + (setnumber-1)*(sizeof(ParamSet_t)+EEPROM_CHECKSUMMED_BLOCK_OVERHEAD);
102 
  writeChecksummedBlock(EEPARAM_REVISION, (uint8_t*)&staticParams, offset, sizeof(ParamSet_t));
103 
  // set this parameter set to active set
104 
}
105 
 
106 
void paramSet_readOrDefault() {
107 
  // parameter version  check
108 
  if (paramSet_readFromEEProm(1)) {
109 
    // if version check faild
110 
    printf("\n\rwriting default parameter sets");
111 
    for (uint8_t i=5; i>0; i--) {
112 
      paramSet_default(i);
113 
      paramSet_writeToEEProm(i);
114 
    }
115 
    // default-Setting is parameter set 1
116 
    paramSet_readFromEEProm(1);
117 
    // For some strange reason, the read will have no effect.
118 
    // Lets reset...
119 
    // wdt_enable(WDTO_500MS);
120 
  }
121 
  printf("\n\r\rUsing Parameter Set %d", 1);
122 
}
123 
 
124 
/***************************************************/
125 
/*          Read IMU Config from EEPROM            */
126 
/***************************************************/
127 
uint8_t IMUConfig_readFromEEprom(void) {
128 
  return readChecksummedBlock(IMUCONFIG_REVISION, (uint8_t*)&IMUConfig, EEPROM_ADR_IMU_CONFIG, sizeof(IMUConfig_t));
129 
}
130 
 
131 
/***************************************************/
132 
/*          Write IMU Config to EEPROM             */
133 
/***************************************************/
134 
void IMUConfig_writeToEEprom(void) {
135 
  writeChecksummedBlock(IMUCONFIG_REVISION, (uint8_t*)&IMUConfig, EEPROM_ADR_IMU_CONFIG, sizeof(IMUConfig_t));
136 
}
137 
 
138 
void IMUConfig_readOrDefault(void) {
139 
    if(IMUConfig_readFromEEprom()) {
140 
      printf("\n\rwriting default IMU config");
141 
      IMUConfig_default();
142 
      IMUConfig_writeToEEprom();
143 
    }
144 
}
145 
 
146 
/***************************************************/
2132 - 147 
/* ChannelMap and R/C trim                         */
2108 - 148 
/***************************************************/
149 
void channelMap_writeToEEProm(void) {
2116 - 150 
  writeChecksummedBlock(CHANNELMAP_REVISION, (uint8_t*)&channelMap, EEPROM_ADR_CHANNELMAP, sizeof(ChannelMap_t));
2108 - 151 
}
152 
 
153 
void channelMap_readOrDefault(void) {
2116 - 154 
  if (readChecksummedBlock(CHANNELMAP_REVISION, (uint8_t*)&channelMap, EEPROM_ADR_CHANNELMAP, sizeof(ChannelMap_t))) {
2108 - 155 
    printf("\n\rwriting default channel map");
156 
    channelMap_default();
157 
    channelMap_writeToEEProm();
158 
  }
159 
}
160 
 
2132 - 161 
void rcTrim_writeToEEProm(void) {
162 
  writeChecksummedBlock(0, (uint8_t*)&rcTrim, EEPROM_ADR_RCTRIM, sizeof(RCTrim_t));
163 
}
164 
 
165 
void rcTrim_readOrDefault(void) {
166 
  if (readChecksummedBlock(0, (uint8_t*)&rcTrim, EEPROM_ADR_RCTRIM, sizeof(RCTrim_t))) {
167 
    printf("\n\rwriting zero RC trim");
168 
    RC_setZeroTrim();
169 
    rcTrim_writeToEEProm();
170 
  }
171 
}
172 
 
2108 - 173 
/***************************************************/
174 
/* Sensor offsets                                  */
175 
/***************************************************/
176 
uint8_t gyroOffset_readFromEEProm(void) {
177 
  return readChecksummedBlock(SENSOROFFSET_REVISION, (uint8_t*)&gyroOffset, EEPROM_ADR_GYROOFFSET, sizeof(sensorOffset_t));
178 
}
179 
 
180 
void gyroOffset_writeToEEProm(void) {
181 
  writeChecksummedBlock(SENSOROFFSET_REVISION, (uint8_t*)&gyroOffset, EEPROM_ADR_GYROOFFSET, sizeof(sensorOffset_t));
182 
}
183 
 
184 
uint8_t airpressureOffset_readFromEEProm(void) {
185 
  return readChecksummedBlock(SENSOROFFSET_REVISION, (uint8_t*)&airpressureOffset, EEPROM_ADR_AIRSPEEDOFFSET, sizeof(uint16_t));
186 
}
187 
 
188 
void airpressureOffset_writeToEEProm(void) {
189 
  writeChecksummedBlock(SENSOROFFSET_REVISION, (uint8_t*)&airpressureOffset, EEPROM_ADR_AIRSPEEDOFFSET, sizeof(uint16_t));
190 
}