Rev 2109 | Rev 2111 | Go to most recent revision | Details | Compare with Previous | Last modification | View Log | RSS feed
Rev | Author | Line No. | Line |
---|---|---|---|
2108 | - | 1 | Sub-version for an Arduino Pro Mini with an InvenSense ITG3200 3 axis I2C gyro. |
2 | A 4017 decimal counter is used for servo control. |
||
3 | |||
4 | I/O pin assignments: |
||
5 | |||
6 | PB0/ICP1 PPM receiver signal in |
||
7 | PB1,2 Digital outputs (output.c) |
||
2110 | - | 8 | PB3,4 Left free for SPI use |
9 | PB5 Green Arduino LED (use as LED2). |
||
2108 | - | 10 | PB6,7 Xtal |
11 | |||
12 | PC0,1,2,3 unused |
||
13 | PC5/SCL I2C to gyro |
||
14 | PC4/SDA I2C to gyro |
||
15 | PC6 RESET |
||
16 | PC7 No pin?? |
||
17 | |||
18 | PD0 RxD serial for configuration, diags etc. |
||
19 | PD1 TxD serial for configuration, diags etc. |
||
2109 | - | 20 | PD2 Performance analysis |
21 | PD3/OC2B: CLK of 4017 change B3 |
||
2108 | - | 22 | PD4: RESET of 4017 |
23 | PD5 Beeper |
||
2110 | - | 24 | PD6 Red LED |
25 | PD7 unusd |
||
2108 | - | 26 | |
27 | ADC6 Battery voltage divider |
||
28 | ADC7 Airspeed sensor |