Rev 2108 | Rev 2110 | Go to most recent revision | Details | Compare with Previous | Last modification | View Log | RSS feed
| Rev | Author | Line No. | Line |
|---|---|---|---|
| 2108 | - | 1 | Sub-version for an Arduino Pro Mini with an InvenSense ITG3200 3 axis I2C gyro. |
| 2 | A 4017 decimal counter is used for servo control. |
||
| 3 | |||
| 4 | I/O pin assignments: |
||
| 5 | |||
| 6 | PB0/ICP1 PPM receiver signal in |
||
| 7 | PB1,2 Digital outputs (output.c) |
||
| 8 | PB3,4,5 Left free for SPI use |
||
| 9 | PB6,7 Xtal |
||
| 10 | |||
| 11 | PC0,1,2,3 unused |
||
| 12 | PC5/SCL I2C to gyro |
||
| 13 | PC4/SDA I2C to gyro |
||
| 14 | PC6 RESET |
||
| 15 | PC7 No pin?? |
||
| 16 | |||
| 17 | PD0 RxD serial for configuration, diags etc. |
||
| 18 | PD1 TxD serial for configuration, diags etc. |
||
| 2109 | - | 19 | PD2 Performance analysis |
| 20 | PD3/OC2B: CLK of 4017 change B3 |
||
| 2108 | - | 21 | PD4: RESET of 4017 |
| 22 | PD5 Beeper |
||
| 23 | PD6,7 LEDs |
||
| 24 | |||
| 25 | |||
| 26 | ADC6 Battery voltage divider |
||
| 27 | ADC7 Airspeed sensor |