Go to most recent revision | Details | Last modification | View Log | RSS feed
| Rev | Author | Line No. | Line |
|---|---|---|---|
| 1 | ingob | 1 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
| 2 | // + www.MikroKopter.com |
||
| 3 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
| 2050 | holgerb | 4 | // + Software Nutzungsbedingungen (english version: see below) |
| 5 | // + der Fa. HiSystems GmbH, Flachsmeerstrasse 2, 26802 Moormerland - nachfolgend Lizenzgeber genannt - |
||
| 6 | // + Der Lizenzgeber räumt dem Kunden ein nicht-ausschließliches, zeitlich und räumlich* unbeschränktes Recht ein, die im den |
||
| 7 | // + Mikrocontroller verwendete Firmware für die Hardware Flight-Ctrl, Navi-Ctrl, BL-Ctrl, MK3Mag & PC-Programm MikroKopter-Tool |
||
| 8 | // + - nachfolgend Software genannt - nur für private Zwecke zu nutzen. |
||
| 9 | // + Der Einsatz dieser Software ist nur auf oder mit Produkten des Lizenzgebers zulässig. |
||
| 1 | ingob | 10 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
| 2050 | holgerb | 11 | // + Die vom Lizenzgeber gelieferte Software ist urheberrechtlich geschützt. Alle Rechte an der Software sowie an sonstigen im |
| 12 | // + Rahmen der Vertragsanbahnung und Vertragsdurchführung überlassenen Unterlagen stehen im Verhältnis der Vertragspartner ausschließlich dem Lizenzgeber zu. |
||
| 13 | // + Die in der Software enthaltenen Copyright-Vermerke, Markenzeichen, andere Rechtsvorbehalte, Seriennummern sowie |
||
| 14 | // + sonstige der Programmidentifikation dienenden Merkmale dürfen vom Kunden nicht verändert oder unkenntlich gemacht werden. |
||
| 15 | // + Der Kunde trifft angemessene Vorkehrungen für den sicheren Einsatz der Software. Er wird die Software gründlich auf deren |
||
| 16 | // + Verwendbarkeit zu dem von ihm beabsichtigten Zweck testen, bevor er diese operativ einsetzt. |
||
| 17 | // + Die Haftung des Lizenzgebers wird - soweit gesetzlich zulässig - begrenzt in Höhe des typischen und vorhersehbaren |
||
| 18 | // + Schadens. Die gesetzliche Haftung bei Personenschäden und nach dem Produkthaftungsgesetz bleibt unberührt. Dem Lizenzgeber steht jedoch der Einwand |
||
| 19 | // + des Mitverschuldens offen. |
||
| 20 | // + Der Kunde trifft angemessene Vorkehrungen für den Fall, dass die Software ganz oder teilweise nicht ordnungsgemäß arbeitet. |
||
| 21 | // + Er wird die Software gründlich auf deren Verwendbarkeit zu dem von ihm beabsichtigten Zweck testen, bevor er diese operativ einsetzt. |
||
| 22 | // + Der Kunde wird er seine Daten vor Einsatz der Software nach dem Stand der Technik sichern. |
||
| 23 | // + Der Kunde ist darüber unterrichtet, dass der Lizenzgeber seine Daten im zur Vertragsdurchführung erforderlichen Umfang |
||
| 24 | // + und auf Grundlage der Datenschutzvorschriften erhebt, speichert, verarbeitet und, sofern notwendig, an Dritte übermittelt. |
||
| 25 | // + *) Die räumliche Nutzung bezieht sich nur auf den Einsatzort, nicht auf die Reichweite der programmierten Software. |
||
| 26 | // + #### ENDE DER NUTZUNGSBEDINGUNGEN ####' |
||
| 27 | // + Hinweis: Informationen über erweiterte Nutzungsrechte (wie z.B. Nutzung für nicht-private Zwecke) sind auf Anfrage per Email an info(@)hisystems.de verfügbar. |
||
| 1 | ingob | 28 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
| 2050 | holgerb | 29 | // + Software LICENSING TERMS |
| 1 | ingob | 30 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
| 2050 | holgerb | 31 | // + of HiSystems GmbH, Flachsmeerstrasse 2, 26802 Moormerland, Germany - the Licensor - |
| 32 | // + The Licensor grants the customer a non-exclusive license to use the microcontroller firmware of the Flight-Ctrl, Navi-Ctrl, BL-Ctrl, and MK3Mag hardware |
||
| 33 | // + (the Software) exclusively for private purposes. The License is unrestricted with respect to time and territory*. |
||
| 34 | // + The Software may only be used with the Licensor's products. |
||
| 35 | // + The Software provided by the Licensor is protected by copyright. With respect to the relationship between the parties to this |
||
| 36 | // + agreement, all rights pertaining to the Software and other documents provided during the preparation and execution of this |
||
| 37 | // + agreement shall be the property of the Licensor. |
||
| 38 | // + The information contained in the Software copyright notices, trademarks, other legal reservations, serial numbers and other |
||
| 39 | // + features that can be used to identify the program may not be altered or defaced by the customer. |
||
| 40 | // + The customer shall be responsible for taking reasonable precautions |
||
| 41 | // + for the safe use of the Software. The customer shall test the Software thoroughly regarding its suitability for the |
||
| 42 | // + intended purpose before implementing it for actual operation. The Licensor's liability shall be limited to the extent of typical and |
||
| 43 | // + foreseeable damage to the extent permitted by law, notwithstanding statutory liability for bodily injury and product |
||
| 44 | // + liability. However, the Licensor shall be entitled to the defense of contributory negligence. |
||
| 45 | // + The customer will take adequate precautions in the case, that the software is not working properly. The customer will test |
||
| 46 | // + the software for his purpose before any operational usage. The customer will backup his data before using the software. |
||
| 47 | // + The customer understands that the Licensor collects, stores and processes, and, where required, forwards, customer data |
||
| 48 | // + to third parties to the extent necessary for executing the agreement, subject to applicable data protection and privacy regulations. |
||
| 49 | // + *) The territory aspect only refers to the place where the Software is used, not its programmed range. |
||
| 50 | // + #### END OF LICENSING TERMS #### |
||
| 51 | // + Note: For information on license extensions (e.g. commercial use), please contact us at info(@)hisystems.de. |
||
| 1 | ingob | 52 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
| 53 | #include "main.h" |
||
| 1913 | holgerb | 54 | unsigned char DisableRcOffBeeping = 0; |
| 173 | holgerb | 55 | unsigned char PlatinenVersion = 10; |
| 1232 | hbuss | 56 | unsigned char BattLowVoltageWarning = 94; |
| 2416 | holgerb | 57 | unsigned char BattAutoLandingVoltage = 0, BattComingHomeVoltage = 0; |
| 1298 | hbuss | 58 | unsigned int FlugMinuten = 0,FlugMinutenGesamt = 0; |
| 1512 | holgerb | 59 | unsigned int FlugSekunden = 0; |
| 1444 | ingob | 60 | pVoidFnct_pVoidFnctChar_const_fmt _printf_P; |
| 1702 | holgerb | 61 | unsigned char FoundMotors = 0; |
| 1834 | holgerb | 62 | unsigned char JetiBeep = 0; // to allow any Morse-Beeping of the Jeti-Box |
| 2333 | holgerb | 63 | unsigned char ActiveParamSet = 3; |
| 2402 | holgerb | 64 | unsigned char LipoCells = 4; |
| 1444 | ingob | 65 | |
| 2030 | holgerb | 66 | void PrintLine(void) |
| 67 | { |
||
| 68 | printf("\n\r==================================="); |
||
| 69 | } |
||
| 70 | |||
| 71 | |||
| 819 | hbuss | 72 | void CalMk3Mag(void) |
| 73 | { |
||
| 74 | static unsigned char stick = 1; |
||
| 75 | if(PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] > -20) stick = 0; |
||
| 76 | if((PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] < -70) && !stick) |
||
| 77 | { |
||
| 78 | stick = 1; |
||
| 79 | WinkelOut.CalcState++; |
||
| 1051 | killagreg | 80 | if(WinkelOut.CalcState > 4) |
| 81 | { |
||
| 819 | hbuss | 82 | // WinkelOut.CalcState = 0; // in Uart.c |
| 83 | beeptime = 1000; |
||
| 1051 | killagreg | 84 | } |
| 1232 | hbuss | 85 | else Piep(WinkelOut.CalcState,150); |
| 819 | hbuss | 86 | } |
| 87 | } |
||
| 88 | |||
| 1438 | ingob | 89 | |
| 1268 | hbuss | 90 | void LipoDetection(unsigned char print) |
| 91 | { |
||
| 2407 | holgerb | 92 | #define MAX_CELL_VOLTAGE 43 // max cell voltage for LiPO |
| 2408 | holgerb | 93 | if(print) |
| 94 | { |
||
| 95 | printf("\n\rBatt:"); |
||
| 96 | LipoCells = 1 + UBat / MAX_CELL_VOLTAGE; |
||
| 2416 | holgerb | 97 | if(LipoCells > 6) LipoCells = 6; |
| 2408 | holgerb | 98 | } |
| 2416 | holgerb | 99 | |
| 2390 | holgerb | 100 | if(EE_Parameter.UnterspannungsWarnung < 50) |
| 1654 | killagreg | 101 | { |
| 2402 | holgerb | 102 | BattLowVoltageWarning = LipoCells * EE_Parameter.UnterspannungsWarnung; |
| 1654 | killagreg | 103 | if(print) |
| 104 | { |
||
| 2402 | holgerb | 105 | Piep(LipoCells, 200); |
| 106 | printf(" %d Cells ", LipoCells); |
||
| 1420 | killagreg | 107 | } |
| 1654 | killagreg | 108 | } |
| 109 | else BattLowVoltageWarning = EE_Parameter.UnterspannungsWarnung; |
||
| 2390 | holgerb | 110 | |
| 111 | // automatische Zellenerkennung |
||
| 2416 | holgerb | 112 | if(EE_Parameter.AutoLandingVoltage < 50) BattAutoLandingVoltage = LipoCells * EE_Parameter.AutoLandingVoltage; else BattAutoLandingVoltage = EE_Parameter.AutoLandingVoltage; |
| 113 | if(EE_Parameter.ComingHomeVoltage < 50) BattComingHomeVoltage = LipoCells * EE_Parameter.ComingHomeVoltage; else BattComingHomeVoltage = EE_Parameter.ComingHomeVoltage; |
||
| 2390 | holgerb | 114 | |
| 2416 | holgerb | 115 | if(BattAutoLandingVoltage > BattLowVoltageWarning) BattAutoLandingVoltage = BattLowVoltageWarning - 1; |
| 116 | if(BattComingHomeVoltage >= BattLowVoltageWarning) BattComingHomeVoltage = BattLowVoltageWarning - 1; |
||
| 117 | if(BattAutoLandingVoltage >= BattComingHomeVoltage && EE_Parameter.ComingHomeVoltage) BattAutoLandingVoltage = BattComingHomeVoltage - 1; |
||
| 2408 | holgerb | 118 | |
| 2390 | holgerb | 119 | if(print) |
| 120 | { |
||
| 2408 | holgerb | 121 | printf(" Low warning: %d.%dV",BattLowVoltageWarning/10,BattLowVoltageWarning%10); |
| 2416 | holgerb | 122 | if(BattComingHomeVoltage) printf(" Auto-CH: %d.%dV",BattComingHomeVoltage/10,BattComingHomeVoltage%10); |
| 123 | if(BattAutoLandingVoltage) printf(" Autolanding: %d.%dV",BattAutoLandingVoltage/10,BattAutoLandingVoltage%10); |
||
| 2390 | holgerb | 124 | } |
| 2416 | holgerb | 125 | |
| 1268 | hbuss | 126 | } |
| 127 | |||
| 1 | ingob | 128 | //############################################################################ |
| 129 | //Hauptprogramm |
||
| 130 | int main (void) |
||
| 131 | //############################################################################ |
||
| 132 | { |
||
| 1424 | ingob | 133 | unsigned int timer,i,timer2 = 0, timerPolling; |
| 2341 | holgerb | 134 | unsigned char update_spi = 1; |
| 1051 | killagreg | 135 | DDRB = 0x00; |
| 2330 | holgerb | 136 | PORTB = 0x00; |
| 2309 | holgerb | 137 | DDRD = 0x0A; // UART & J3 J4 J5 |
| 138 | PORTD = 0x5F; // PPM-Input & UART |
||
| 188 | holgerb | 139 | for(timer = 0; timer < 1000; timer++); // verzögern |
| 1660 | holgerb | 140 | #if (defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__)) |
| 2334 | holgerb | 141 | unsigned char AccZ_ErrorCnt = 0; |
| 2309 | holgerb | 142 | if(PINB & 0x02) |
| 143 | { |
||
| 144 | if(PIND & 0x10) PlatinenVersion = 21; // No Bridge from J4 to GND |
||
| 145 | else { PlatinenVersion = 22; ACC_AltitudeControl = 1;}; |
||
| 146 | } |
||
| 147 | else |
||
| 148 | { |
||
| 2367 | holgerb | 149 | PlatinenVersion = 25; ACC_AltitudeControl = 1; |
| 2309 | holgerb | 150 | } |
| 1660 | holgerb | 151 | #else |
| 152 | if(PINB & 0x01) |
||
| 918 | hbuss | 153 | { |
| 1051 | killagreg | 154 | if(PINB & 0x02) PlatinenVersion = 13; |
| 155 | else PlatinenVersion = 11; |
||
| 918 | hbuss | 156 | } |
| 1051 | killagreg | 157 | else |
| 1021 | hbuss | 158 | { |
| 1051 | killagreg | 159 | if(PINB & 0x02) PlatinenVersion = 20; |
| 2309 | holgerb | 160 | else |
| 161 | { |
||
| 162 | PlatinenVersion = 10; |
||
| 163 | DDRD = 0x3E; // Speaker & TXD & J3 J4 J5 |
||
| 164 | PORTD = 0x47; // |
||
| 165 | } |
||
| 1021 | hbuss | 166 | } |
| 1660 | holgerb | 167 | #endif |
| 2316 | holgerb | 168 | |
| 2309 | holgerb | 169 | DDRC = 0x81; // I2C, Spaker |
| 1036 | hbuss | 170 | DDRC |=0x40; // HEF4017 Reset |
| 1 | ingob | 171 | PORTC = 0xff; // Pullup SDA |
| 172 | DDRB = 0x1B; // LEDs und Druckoffset |
||
| 173 | PORTB = 0x01; // LED_Rot |
||
| 2309 | holgerb | 174 | |
| 2146 | holgerb | 175 | HEF4017Reset_ON; |
| 1 | ingob | 176 | MCUSR &=~(1<<WDRF); |
| 177 | WDTCSR |= (1<<WDCE)|(1<<WDE); |
||
| 178 | WDTCSR = 0; |
||
| 179 | |||
| 1652 | holgerb | 180 | beeptime = 2500; |
| 1660 | holgerb | 181 | StickGier = 0; PPM_in[K_GAS] = 0; StickRoll = 0; StickNick = 0; |
| 182 | if(PlatinenVersion >= 20) GIER_GRAD_FAKTOR = 1220; else GIER_GRAD_FAKTOR = 1291; // unterschiedlich für ME und ENC |
||
| 1 | ingob | 183 | ROT_OFF; |
| 2193 | holgerb | 184 | GRN_ON; |
| 1479 | killagreg | 185 | |
| 1 | ingob | 186 | Timer_Init(); |
| 1156 | hbuss | 187 | TIMER2_Init(); |
| 1 | ingob | 188 | UART_Init(); |
| 189 | rc_sum_init(); |
||
| 190 | ADC_Init(); |
||
| 1743 | holgerb | 191 | I2C_Init(1); |
| 597 | ingob | 192 | SPI_MasterInit(); |
| 1486 | killagreg | 193 | Capacity_Init(); |
| 2309 | holgerb | 194 | LIBFC_Init(LIB_FC_COMPATIBLE); |
| 1431 | ingob | 195 | GRN_ON; |
| 196 | sei(); |
||
| 1622 | killagreg | 197 | ParamSet_Init(); |
| 1211 | hbuss | 198 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
| 2426 | holgerb | 199 | if(PlatinenVersion < 20) |
| 200 | { |
||
| 201 | wdt_enable(WDTO_250MS); // Reset-Commando |
||
| 2462 | holgerb | 202 | while(1) printf("\n\rOld FC Hardware not supported by this Firmware!"); |
| 2426 | holgerb | 203 | } |
| 2427 | holgerb | 204 | #ifndef REDUNDANT_FC_SLAVE |
| 2426 | holgerb | 205 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
| 1211 | hbuss | 206 | // + Check connected BL-Ctrls |
| 207 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
| 1648 | killagreg | 208 | // Check connected BL-Ctrls |
| 209 | BLFlags |= BLFLAG_READ_VERSION; |
||
| 1662 | killagreg | 210 | motor_read = 0; // read the first I2C-Data |
| 2466 | holgerb | 211 | for(i=0; i < 500; i++) |
| 212 | { |
||
| 213 | SendMotorData(); |
||
| 214 | timer = SetDelay(5); |
||
| 215 | while(!(BLFlags & BLFLAG_TX_COMPLETE) && !CheckDelay(timer)); //wait for complete transfer |
||
| 216 | } |
||
| 1648 | killagreg | 217 | printf("\n\rFound BL-Ctrl: "); |
| 2466 | holgerb | 218 | // timer = SetDelay(1000); |
| 1211 | hbuss | 219 | for(i=0; i < MAX_MOTORS; i++) |
| 1622 | killagreg | 220 | { |
| 2466 | holgerb | 221 | // SendMotorData(); |
| 222 | // while(!(BLFlags & BLFLAG_TX_COMPLETE) && !CheckDelay(timer)); //wait for complete transfer |
||
| 1622 | killagreg | 223 | if(Mixer.Motor[i][0] > 0) // wait max 4 sec for the BL-Ctrls to wake up |
| 224 | { |
||
| 1648 | killagreg | 225 | while(!CheckDelay(timer) && !(Motor[i].State & MOTOR_STATE_PRESENT_MASK) ) |
| 226 | { |
||
| 227 | SendMotorData(); |
||
| 1683 | killagreg | 228 | while(!(BLFlags & BLFLAG_TX_COMPLETE) && !CheckDelay(timer)); //wait for complete transfer |
| 1648 | killagreg | 229 | } |
| 1232 | hbuss | 230 | } |
| 1648 | killagreg | 231 | if(Motor[i].State & MOTOR_STATE_PRESENT_MASK) |
| 232 | { |
||
| 2466 | holgerb | 233 | unsigned char vers; |
| 234 | printf("%d",(i+1)%10); |
||
| 1702 | holgerb | 235 | FoundMotors++; |
| 2466 | holgerb | 236 | vers = Motor[i].VersionMajor * 100 + Motor[i].VersionMinor; // creates 104 from 1.04 |
| 237 | if(vers && VersionInfo.BL_Firmware > vers) VersionInfo.BL_Firmware = vers; |
||
| 2380 | holgerb | 238 | // if(Motor[i].Version & MOTOR_STATE_FAST_MODE) printf("(fast)\n\r"); |
| 239 | // else if(Motor[i].Version & MOTOR_STATE_NEW_PROTOCOL_MASK) printf("(new)\n\r"); |
||
| 2466 | holgerb | 240 | // printf(":V%03d\n\r",vers); |
| 1648 | killagreg | 241 | } |
| 1622 | killagreg | 242 | } |
| 1211 | hbuss | 243 | for(i=0; i < MAX_MOTORS; i++) |
| 1051 | killagreg | 244 | { |
| 1622 | killagreg | 245 | if(!(Motor[i].State & MOTOR_STATE_PRESENT_MASK) && Mixer.Motor[i][0] > 0) |
| 246 | { |
||
| 247 | printf("\n\r\n\r!! MISSING BL-CTRL: %d !!",i+1); |
||
| 1701 | holgerb | 248 | ServoActive = 2; // just in case the FC would be used as camera-stabilizer |
| 1111 | hbuss | 249 | } |
| 1622 | killagreg | 250 | Motor[i].State &= ~MOTOR_STATE_ERROR_MASK; // clear error counter |
| 1 | ingob | 251 | } |
| 2466 | holgerb | 252 | #if (defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__)) |
| 253 | if(VersionInfo.BL_Firmware != 255) |
||
| 254 | { |
||
| 255 | printf("\n\rBL-Firmware %d.%02d",VersionInfo.BL_Firmware/100,VersionInfo.BL_Firmware%100); |
||
| 256 | if(VersionInfo.BL_Firmware >= 100 && VersionInfo.BL_Firmware <= 102) printf("<-- warning old Version!"); |
||
| 257 | } |
||
| 258 | #endif |
||
| 259 | |||
| 2030 | holgerb | 260 | PrintLine();// ("\n\r==================================="); |
| 1765 | killagreg | 261 | if(RequiredMotors < FoundMotors) VersionInfo.HardwareError[1] |= FC_ERROR1_MIXER; |
| 2407 | holgerb | 262 | if(RequiredMotors > 8) Max_I2C_Packets = 8; else Max_I2C_Packets = RequiredMotors; |
| 2437 | holgerb | 263 | #else |
| 2462 | holgerb | 264 | printf("\n\r\n\r--> REDUNDANT SLAVE <---\n\r"); |
| 2437 | holgerb | 265 | #endif |
| 266 | |||
| 267 | #ifdef REDUNDANT_FC_MASTER |
||
| 2462 | holgerb | 268 | printf("\n\r\n\r--> REDUNDANT MASTER <---\n\r"); |
| 2437 | holgerb | 269 | #endif |
| 270 | |||
| 2427 | holgerb | 271 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
| 272 | // Calibrating altitude sensor |
||
| 273 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
| 1529 | killagreg | 274 | //if(EE_Parameter.GlobalConfig & CFG_HOEHENREGELUNG) |
| 1622 | killagreg | 275 | { |
| 276 | printf("\n\rCalibrating pressure sensor.."); |
||
| 277 | timer = SetDelay(1000); |
||
| 278 | SucheLuftruckOffset(); |
||
| 279 | while (!CheckDelay(timer)); |
||
| 280 | printf("OK\n\r"); |
||
| 1 | ingob | 281 | } |
| 1051 | killagreg | 282 | |
| 2427 | holgerb | 283 | #ifdef REDUNDANT_FC_SLAVE |
| 2418 | holgerb | 284 | VersionInfo.HardwareError[0] = 0; |
| 285 | VersionInfo.HardwareError[1] = 0; |
||
| 286 | #endif |
||
| 287 | |||
| 1622 | killagreg | 288 | SetNeutral(0); |
| 1 | ingob | 289 | |
| 290 | ROT_OFF; |
||
| 1051 | killagreg | 291 | |
| 1 | ingob | 292 | beeptime = 2000; |
| 1051 | killagreg | 293 | ExternControl.Digital[0] = 0x55; |
| 1 | ingob | 294 | |
| 1051 | killagreg | 295 | |
| 1652 | holgerb | 296 | FlugMinuten = (unsigned int)GetParamByte(PID_FLIGHT_MINUTES) * 256 + (unsigned int)GetParamByte(PID_FLIGHT_MINUTES + 1); |
| 297 | FlugMinutenGesamt = (unsigned int)GetParamByte(PID_FLIGHT_MINUTES_TOTAL) * 256 + (unsigned int)GetParamByte(PID_FLIGHT_MINUTES_TOTAL + 1); |
||
| 1622 | killagreg | 298 | |
| 1702 | holgerb | 299 | if((FlugMinutenGesamt == 0xFFFF) || (FlugMinuten == 0xFFFF)) |
| 1622 | killagreg | 300 | { |
| 301 | FlugMinuten = 0; |
||
| 302 | FlugMinutenGesamt = 0; |
||
| 303 | } |
||
| 2034 | holgerb | 304 | printf("\n\rFlight-time %u min Total:%u min", FlugMinuten, FlugMinutenGesamt); |
| 1 | ingob | 305 | LcdClear(); |
| 173 | holgerb | 306 | I2CTimeout = 5000; |
| 819 | hbuss | 307 | WinkelOut.Orientation = 1; |
| 1268 | hbuss | 308 | LipoDetection(1); |
| 1626 | killagreg | 309 | LIBFC_ReceiverInit(EE_Parameter.Receiver); |
| 2030 | holgerb | 310 | PrintLine();// ("\n\r==================================="); |
| 1622 | killagreg | 311 | //SpektrumBinding(); |
| 1350 | hbuss | 312 | timer = SetDelay(2000); |
| 1424 | ingob | 313 | timerPolling = SetDelay(250); |
| 1648 | killagreg | 314 | |
| 1636 | ingob | 315 | Debug(ANSI_CLEAR "FC-Start!\n\rFlugzeit: %d min", FlugMinutenGesamt); // Note: this won't waste flash memory, if #DEBUG is not active |
| 2340 | holgerb | 316 | //printf("\n\rEE_Parameter size:%i\n\r", PARAMSET_STRUCT_LEN); |
| 317 | |||
| 1702 | holgerb | 318 | DebugOut.Status[0] = 0x01 | 0x02; |
| 1834 | holgerb | 319 | JetiBeep = 0; |
| 1913 | holgerb | 320 | if(EE_Parameter.ExtraConfig & CFG_NO_RCOFF_BEEPING) DisableRcOffBeeping = 1; |
| 2466 | holgerb | 321 | ReadBlSize = 3; // don't read the version any more |
| 2462 | holgerb | 322 | #ifdef REDUNDANT_FC_SLAVE |
| 323 | timer = SetDelay(2500); |
||
| 324 | while(!CheckDelay(timer)); |
||
| 325 | printf("\n\rStart\n\r"); |
||
| 326 | #endif |
||
| 2330 | holgerb | 327 | while(1) |
| 1 | ingob | 328 | { |
| 2439 | holgerb | 329 | EEAR = EE_DUMMY; // Set the EEPROM Address pointer to an unused space |
| 1945 | holgerb | 330 | if(ReceiverUpdateModeActive) while (1) PORTC &= ~(1<<7); // Beeper off |
| 1419 | ingob | 331 | if(UpdateMotor && AdReady) // ReglerIntervall |
| 1051 | killagreg | 332 | { |
| 2386 | holgerb | 333 | cli(); |
| 334 | UpdateMotor--; |
||
| 335 | sei(); |
||
| 819 | hbuss | 336 | if(WinkelOut.CalcState) CalMk3Mag(); |
| 1644 | holgerb | 337 | else MotorRegler(); |
| 338 | SendMotorData(); |
||
| 1 | ingob | 339 | ROT_OFF; |
| 1937 | holgerb | 340 | if(SenderOkay) { SenderOkay--; /*VersionInfo.HardwareError[1] &= ~FC_ERROR1_PPM;*/ } |
| 1603 | killagreg | 341 | else |
| 342 | { |
||
| 343 | TIMSK1 |= _BV(ICIE1); // enable PPM-Input |
||
| 344 | PPM_in[0] = 0; // set RSSI to zero on data timeout |
||
| 1765 | killagreg | 345 | VersionInfo.HardwareError[1] |= FC_ERROR1_PPM; |
| 2486 | holgerb | 346 | // Now clear the channel values - they would be wrong |
| 347 | PPM_diff[EE_Parameter.Kanalbelegung[K_NICK]] = 0; |
||
| 348 | PPM_diff[EE_Parameter.Kanalbelegung[K_ROLL]] = 0; |
||
| 349 | PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] = 0; |
||
| 350 | PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]] = 0; |
||
| 351 | PPM_in[EE_Parameter.Kanalbelegung[K_GIER]] = 0; |
||
| 352 | PPM_in[EE_Parameter.Kanalbelegung[K_GAS]] = 0; |
||
| 1603 | killagreg | 353 | } |
| 1420 | killagreg | 354 | //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
| 1481 | holgerb | 355 | //if(HoehenReglerAktiv && NaviDataOkay && SenderOkay < 160 && SenderOkay > 10 && FromNaviCtrl_Value.SerialDataOkay > 220) SenderOkay = 160; |
| 356 | //if(HoehenReglerAktiv && NaviDataOkay && SenderOkay < 101 && SenderOkay > 10 && FromNaviCtrl_Value.SerialDataOkay > 1) SenderOkay = 101; |
||
| 1309 | hbuss | 357 | //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
| 1210 | hbuss | 358 | if(!--I2CTimeout || MissingMotor) |
| 173 | holgerb | 359 | { |
| 1254 | killagreg | 360 | if(!I2CTimeout) |
| 1210 | hbuss | 361 | { |
| 1662 | killagreg | 362 | I2C_Reset(); |
| 1210 | hbuss | 363 | I2CTimeout = 5; |
| 1322 | hbuss | 364 | DebugOut.Analog[28]++; // I2C-Error |
| 1765 | killagreg | 365 | VersionInfo.HardwareError[1] |= FC_ERROR1_I2C; |
| 1702 | holgerb | 366 | DebugOut.Status[1] |= 0x02; // BL-Error-Status |
| 1322 | hbuss | 367 | } |
| 1051 | killagreg | 368 | if((BeepMuster == 0xffff) && MotorenEin) |
| 369 | { |
||
| 1936 | holgerb | 370 | beeptime = 25000; |
| 173 | holgerb | 371 | BeepMuster = 0x0080; |
| 1051 | killagreg | 372 | } |
| 1 | ingob | 373 | } |
| 1051 | killagreg | 374 | else |
| 1 | ingob | 375 | { |
| 1051 | killagreg | 376 | ROT_OFF; |
| 1944 | holgerb | 377 | } |
| 1916 | holgerb | 378 | LIBFC_Polling(); |
| 379 | |||
| 1639 | holgerb | 380 | if(!UpdateMotor) |
| 2012 | holgerb | 381 | { |
| 382 | #if (defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__)) |
||
| 383 | if(NewSBusData) ProcessSBus(); |
||
| 384 | else |
||
| 385 | #endif |
||
| 1639 | holgerb | 386 | { |
| 2404 | holgerb | 387 | if(BytegapSPI == 0) SPI_TransmitByte(); |
| 1760 | holgerb | 388 | if(CalculateServoSignals) CalculateServo(); |
| 389 | DatenUebertragung(); |
||
| 390 | BearbeiteRxDaten(); |
||
| 1254 | killagreg | 391 | if(CheckDelay(timer)) |
| 392 | { |
||
| 1512 | holgerb | 393 | static unsigned char second; |
| 1420 | killagreg | 394 | timer += 20; // 20 ms interval |
| 2191 | holgerb | 395 | CalcNickServoValue(); |
| 1925 | holgerb | 396 | #if (defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__)) |
| 1917 | holgerb | 397 | if(EE_Parameter.Receiver == RECEIVER_HOTT) HoTT_Menu(); |
| 2263 | holgerb | 398 | else |
| 399 | if(EE_Parameter.Receiver == RECEIVER_JETI) BuildJeti_Vario(); |
||
| 2334 | holgerb | 400 | // ++++++++++++++++++++++++++++ |
| 401 | // + check the ACC-Z range |
||
| 402 | if(ACC_AltitudeControl && ((Aktuell_az < 300) || (DebugOut.Analog[7] < (128 * 4) && Aktuell_az > 850))) // DebugOut.Analog[7] = GasMischanteil |
||
| 403 | { |
||
| 404 | if(++AccZ_ErrorCnt > 50) |
||
| 405 | { |
||
| 406 | if(MotorenEin) VersionInfo.HardwareError[0] |= FC_ERROR0_ACC_TOP; |
||
| 407 | else CalibrationDone = 0; |
||
| 408 | } |
||
| 409 | } |
||
| 410 | else AccZ_ErrorCnt = 0; |
||
| 411 | // ++++++++++++++++++++++++++++ |
||
| 1925 | holgerb | 412 | #endif |
| 2390 | holgerb | 413 | if(MissingMotor || Capacity.MinOfMaxPWM < 30) |
| 1702 | holgerb | 414 | { |
| 2390 | holgerb | 415 | if(MissingMotor) VersionInfo.HardwareError[1] |= FC_ERROR1_BL_MISSING; |
| 1702 | holgerb | 416 | DebugOut.Status[1] |= 0x02; // BL-Error-Status |
| 1765 | killagreg | 417 | } |
| 418 | else |
||
| 1702 | holgerb | 419 | { |
| 1936 | holgerb | 420 | if(!beeptime) |
| 421 | { |
||
| 422 | if(I2CTimeout > 6) DebugOut.Status[1] &= ~0x02; // BL-Error-Status |
||
| 423 | } |
||
| 1765 | killagreg | 424 | } |
| 2029 | holgerb | 425 | if(DisableRcOffBeeping) if(SenderOkay > 150) { DisableRcOffBeeping = 0; beeptime = 5000;}; |
| 1420 | killagreg | 426 | if(PcZugriff) PcZugriff--; |
| 427 | else |
||
| 428 | { |
||
| 429 | ExternControl.Config = 0; |
||
| 430 | ExternStickNick = 0; |
||
| 431 | ExternStickRoll = 0; |
||
| 432 | ExternStickGier = 0; |
||
| 1913 | holgerb | 433 | if(!SenderOkay) |
| 1420 | killagreg | 434 | { |
| 1914 | holgerb | 435 | if(BeepMuster == 0xffff && DisableRcOffBeeping != 2) |
| 1913 | holgerb | 436 | { |
| 437 | beeptime = 15000; |
||
| 438 | BeepMuster = 0x0c00; |
||
| 1914 | holgerb | 439 | if(DisableRcOffBeeping) DisableRcOffBeeping = 2; |
| 1913 | holgerb | 440 | } |
| 1914 | holgerb | 441 | } |
| 1420 | killagreg | 442 | } |
| 1682 | holgerb | 443 | if(NaviDataOkay > 200) |
| 1420 | killagreg | 444 | { |
| 445 | NaviDataOkay--; |
||
| 1765 | killagreg | 446 | VersionInfo.HardwareError[1] &= ~FC_ERROR1_SPI_RX; |
| 2342 | holgerb | 447 | VersionInfo.Flags |= FC_VERSION_FLAG_NC_PRESENT; |
| 1420 | killagreg | 448 | } |
| 449 | else |
||
| 450 | { |
||
| 1702 | holgerb | 451 | if(NC_Version.Compatible) |
| 452 | { |
||
| 1930 | holgerb | 453 | VersionInfo.HardwareError[1] |= FC_ERROR1_SPI_RX; |
| 454 | NC_ErrorCode = 9; // "ERR: no NC communication" |
||
| 1702 | holgerb | 455 | if(BeepMuster == 0xffff && MotorenEin) |
| 456 | { |
||
| 457 | beeptime = 15000; |
||
| 458 | BeepMuster = 0xA800; |
||
| 459 | } |
||
| 1765 | killagreg | 460 | } |
| 1420 | killagreg | 461 | GPS_Nick = 0; |
| 462 | GPS_Roll = 0; |
||
| 1945 | holgerb | 463 | GPS_Aid_StickMultiplikator = 0; |
| 1916 | holgerb | 464 | GPSInfo.Flags = 0; |
| 2348 | holgerb | 465 | FromNaviCtrl_Value.Kalman_K = -1; |
| 1936 | holgerb | 466 | FromNaviCtrl.AccErrorN = 0; |
| 467 | FromNaviCtrl.AccErrorR = 0; |
||
| 1691 | holgerb | 468 | FromNaviCtrl.CompassValue = -1; |
| 2342 | holgerb | 469 | FromNC_AltitudeSpeed = 0; |
| 470 | FromNC_AltitudeSetpoint = 0; |
||
| 471 | VersionInfo.Flags &= ~FC_VERSION_FLAG_NC_PRESENT; |
||
| 1703 | holgerb | 472 | NaviDataOkay = 0; |
| 1420 | killagreg | 473 | } |
| 2390 | holgerb | 474 | if(UBat <= BattLowVoltageWarning) |
| 1254 | killagreg | 475 | { |
| 1765 | killagreg | 476 | FC_StatusFlags |= FC_STATUS_LOWBAT; |
| 2373 | holgerb | 477 | if(BeepMuster == 0xffff && UBat > 10) // Do not beep, if the voltage reading is below 1V (Supplied via MKUSB) |
| 1254 | killagreg | 478 | { |
| 479 | beeptime = 6000; |
||
| 480 | BeepMuster = 0x0300; |
||
| 481 | } |
||
| 482 | } |
||
| 2009 | holgerb | 483 | // +++++++++++++++++++++++++++++++++ |
| 484 | // Sekundentakt |
||
| 1512 | holgerb | 485 | if(++second == 49) |
| 486 | { |
||
| 487 | second = 0; |
||
| 2346 | holgerb | 488 | #if (defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__)) |
| 2345 | holgerb | 489 | if(ShowSettingNameTime) ShowSettingNameTime--; |
| 2346 | holgerb | 490 | #endif |
| 2009 | holgerb | 491 | if(FC_StatusFlags & FC_STATUS_FLY) FlugSekunden++; |
| 2309 | holgerb | 492 | else timer2 = 1450; // 0,5 Minuten aufrunden |
| 493 | if(modell_fliegt < 1024) |
||
| 2009 | holgerb | 494 | { |
| 2309 | holgerb | 495 | if(StartLuftdruck < Luftdruck) StartLuftdruck += 5; |
| 2009 | holgerb | 496 | else |
| 2309 | holgerb | 497 | if(StartLuftdruck > Luftdruck) StartLuftdruck -= 5; |
| 2009 | holgerb | 498 | } |
| 2390 | holgerb | 499 | if(UBat > BattLowVoltageWarning + 1) FC_StatusFlags &= ~FC_STATUS_LOWBAT; |
| 1512 | holgerb | 500 | } |
| 2009 | holgerb | 501 | // +++++++++++++++++++++++++++++++++ |
| 1320 | hbuss | 502 | if(++timer2 == 2930) // eine Minute |
| 1298 | hbuss | 503 | { |
| 504 | timer2 = 0; |
||
| 505 | FlugMinuten++; |
||
| 506 | FlugMinutenGesamt++; |
||
| 1652 | holgerb | 507 | SetParamByte(PID_FLIGHT_MINUTES,FlugMinuten / 256); |
| 508 | SetParamByte(PID_FLIGHT_MINUTES+1,FlugMinuten % 256); |
||
| 509 | SetParamByte(PID_FLIGHT_MINUTES_TOTAL,FlugMinutenGesamt / 256); |
||
| 510 | SetParamByte(PID_FLIGHT_MINUTES_TOTAL+1,FlugMinutenGesamt % 256); |
||
| 1344 | hbuss | 511 | timer = SetDelay(20); // falls "timer += 20;" mal nicht geht |
| 1298 | hbuss | 512 | } |
| 1254 | killagreg | 513 | } |
| 921 | hbuss | 514 | LED_Update(); |
| 1486 | killagreg | 515 | Capacity_Update(); |
| 2386 | holgerb | 516 | } |
| 517 | } //else DebugOut.Analog[18]++; |
||
| 2341 | holgerb | 518 | if(update_spi) update_spi--; |
| 519 | } // 500Hz |
||
| 2386 | holgerb | 520 | if(update_spi == 0) // 41Hz |
| 521 | { |
||
| 522 | if(SPI_StartTransmitPacket()) update_spi = 12; |
||
| 523 | else |
||
| 524 | if(BytegapSPI == 0) SPI_TransmitByte(); |
||
| 525 | } |
||
| 526 | else if(BytegapSPI == 0) SPI_TransmitByte(); |
||
| 1 | ingob | 527 | } |
| 528 | } |
||
| 2482 | holgerb | 529 | //DebugOut.Analog[16] |
| 1 | ingob | 530 |