Subversion Repositories FlightCtrl

Rev

Rev 1638 | Rev 1648 | Go to most recent revision | Details | Compare with Previous | Last modification | View Log | RSS feed

Rev Author Line No. Line
1 ingob 1
/*############################################################################
2
############################################################################*/
3
 
4
#ifndef _I2C_MASTER_H
5
#define _I2C_MASTER_H
6
 
7
//############################################################################
8
 
9
// I2C Konstanten
10
#define SCL_CLOCK  200000L
11
#define I2C_TIMEOUT 30000
12
#define I2C_START          0x08
13
#define I2C_REPEATED_START 0x10
14
#define I2C_TX_SLA_ACK     0x18
15
#define I2C_TX_DATA_ACK    0x28
16
#define I2C_RX_SLA_ACK     0x40
17
#define I2C_RX_DATA_ACK    0x50
18
 
19
//############################################################################
20
 
918 hbuss 21
extern volatile unsigned char twi_state;
1210 hbuss 22
extern unsigned char motor,MissingMotor;
1639 holgerb 23
extern unsigned char motorread,TransmitBlConfig;
1 ingob 24
 
1479 killagreg 25
#define MAX_MOTORS      12
1638 holgerb 26
#define MOTOR_STATE_PRESENT_MASK                0x80
27
#define MOTOR_STATE_ERROR_MASK                  0x7F
1479 killagreg 28
 
1638 holgerb 29
 
30
#define MOTOR_STATE_NEW_PROTOCOL_MASK   0x01
31
 
1479 killagreg 32
typedef struct
33
{
1486 killagreg 34
        unsigned char SetPoint; // written by attitude controller
35
        unsigned char State;    // 7 bit for I2C error counter, highest bit indicates if motor is present
36
        unsigned char Current;  // in 0.1 A steps, read back from BL
37
        unsigned char MaxPWM;   // read back from BL is less than 255 if BL is in current limit
1638 holgerb 38
          signed char Temperature; // old BL-Ctrl will return a 255 here 
39
        unsigned char SetPointLowerBits; // for higher Resolution
40
    unsigned char Version;
1479 killagreg 41
} __attribute__((packed)) MotorData_t;
42
 
43
extern MotorData_t Motor[MAX_MOTORS];
44
 
304 ingob 45
void i2c_reset(void);
395 hbuss 46
extern void i2c_init (void); // I2C initialisieren
1639 holgerb 47
//extern void i2c_start (void); // Start I2C
48
//extern void i2c_stop (void); // Stop I2C
1209 hbuss 49
extern void i2c_write_byte (char byte); // 1 Byte schreiben
395 hbuss 50
extern void i2c_reset(void);
1 ingob 51
 
1639 holgerb 52
#define I2C_Start()  {TWCR = (1<<TWSTA) | (1<<TWEN) | (1<<TWINT) | (1<<TWIE);}
53
#define I2C_Stop() {TWCR = (1<<TWEN) | (1<<TWSTO) | (1<<TWINT);}
54
#define I2C_ReceiveByte() {TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWIE) | (1<<TWEA);}
55
#define I2C_ReceiveLastByte() {TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWIE);}
56
#define i2c_write_byte(byte) {TWSR = 0x00; TWDR = byte;  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWIE);}
57
 
1 ingob 58
#endif