Details | Last modification | View Log | RSS feed
| Rev | Author | Line No. | Line |
|---|---|---|---|
| 1754 | - | 1 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
| 2 | // + Copyright (c) Holger Buss, Ingo Busker |
||
| 3 | // + Nur für den privaten Gebrauch / NON-COMMERCIAL USE ONLY |
||
| 4 | // + www.MikroKopter.com |
||
| 5 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
| 6 | // + Es gilt für das gesamte Projekt (Hardware, Software, Binärfiles, Sourcecode und Dokumentation), |
||
| 7 | // + dass eine Nutzung (auch auszugsweise) nur für den privaten und nicht-kommerziellen Gebrauch zulässig ist. |
||
| 8 | // + Sollten direkte oder indirekte kommerzielle Absichten verfolgt werden, ist mit uns (info@mikrokopter.de) Kontakt |
||
| 9 | // + bzgl. der Nutzungsbedingungen aufzunehmen. |
||
| 10 | // + Eine kommerzielle Nutzung ist z.B.Verkauf von MikroKoptern, Bestückung und Verkauf von Platinen oder Bausätzen, |
||
| 11 | // + Verkauf von Luftbildaufnahmen, usw. |
||
| 12 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
| 13 | // + Werden Teile des Quellcodes (mit oder ohne Modifikation) weiterverwendet oder veröffentlicht, |
||
| 14 | // + unterliegen sie auch diesen Nutzungsbedingungen und diese Nutzungsbedingungen incl. Copyright müssen dann beiliegen |
||
| 15 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
| 16 | // + Sollte die Software (auch auszugesweise) oder sonstige Informationen des MikroKopter-Projekts |
||
| 17 | // + auf anderen Webseiten oder Medien veröffentlicht werden, muss unsere Webseite "http://www.mikrokopter.de" |
||
| 18 | // + eindeutig als Ursprung verlinkt und genannt werden |
||
| 19 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
| 20 | // + Keine Gewähr auf Fehlerfreiheit, Vollständigkeit oder Funktion |
||
| 21 | // + Benutzung auf eigene Gefahr |
||
| 22 | // + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden |
||
| 23 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
| 24 | // + Die Portierung oder Nutzung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur |
||
| 25 | // + mit unserer Zustimmung zulässig |
||
| 26 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
| 27 | // + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen |
||
| 28 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
| 29 | // + Redistributions of source code (with or without modifications) must retain the above copyright notice, |
||
| 30 | // + this list of conditions and the following disclaimer. |
||
| 31 | // + * Neither the name of the copyright holders nor the names of contributors may be used to endorse or promote products derived |
||
| 32 | // + from this software without specific prior written permission. |
||
| 33 | // + * The use of this project (hardware, software, binary files, sources and documentation) is only permittet |
||
| 34 | // + for non-commercial use (directly or indirectly) |
||
| 35 | // + Commercial use (for excample: selling of MikroKopters, selling of PCBs, assembly, ...) is only permitted |
||
| 36 | // + with our written permission |
||
| 37 | // + * If sources or documentations are redistributet on other webpages, out webpage (http://www.MikroKopter.de) must be |
||
| 38 | // + clearly linked as origin |
||
| 39 | // + * porting the sources to other systems or using the software on other systems (except hardware from www.mikrokopter.de) is not allowed |
||
| 40 | // + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
||
| 41 | // + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
||
| 42 | // + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
||
| 43 | // + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
||
| 44 | // + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
||
| 45 | // + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
||
| 46 | // + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
||
| 47 | // + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
||
| 48 | // + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
||
| 49 | // + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
||
| 50 | // + POSSIBILITY OF SUCH DAMAGE. |
||
| 51 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
| 52 | #include "main.h" |
||
| 53 | |||
| 54 | |||
| 55 | unsigned char PlatinenVersion = 10; |
||
| 56 | unsigned char SendVersionToNavi = 1; |
||
| 57 | unsigned char BattLowVoltageWarning = 94; |
||
| 58 | unsigned int FlugMinuten = 0,FlugMinutenGesamt = 0; |
||
| 59 | unsigned int FlugSekunden = 0; |
||
| 60 | pVoidFnct_pVoidFnctChar_const_fmt _printf_P; |
||
| 61 | unsigned char FoundMotors = 0; |
||
| 62 | |||
| 63 | void CalMk3Mag(void) |
||
| 64 | { |
||
| 65 | static unsigned char stick = 1; |
||
| 66 | if(PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] > -20) stick = 0; |
||
| 67 | if((PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] < -70) && !stick) |
||
| 68 | { |
||
| 69 | stick = 1; |
||
| 70 | WinkelOut.CalcState++; |
||
| 71 | if(WinkelOut.CalcState > 4) |
||
| 72 | { |
||
| 73 | // WinkelOut.CalcState = 0; // in Uart.c |
||
| 74 | beeptime = 1000; |
||
| 75 | } |
||
| 76 | else Piep(WinkelOut.CalcState,150); |
||
| 77 | } |
||
| 78 | DebugOut.Analog[19] = WinkelOut.CalcState; |
||
| 79 | } |
||
| 80 | |||
| 81 | |||
| 82 | void LipoDetection(unsigned char print) |
||
| 83 | { |
||
| 84 | #define MAX_CELL_VOLTAGE 43 // max cell volatage for LiPO |
||
| 85 | unsigned int timer, cells; |
||
| 86 | if(print) printf("\n\rBatt:"); |
||
| 87 | if(EE_Parameter.UnterspannungsWarnung < 50) // automatische Zellenerkennung |
||
| 88 | { |
||
| 89 | timer = SetDelay(500); |
||
| 90 | if(print) while (!CheckDelay(timer)); |
||
| 91 | // up to 6s LiPo, less than 2s is technical impossible |
||
| 92 | for(cells = 2; cells < 7; cells++) |
||
| 93 | { |
||
| 94 | if(UBat < cells * MAX_CELL_VOLTAGE) break; |
||
| 95 | } |
||
| 96 | |||
| 97 | BattLowVoltageWarning = cells * EE_Parameter.UnterspannungsWarnung; |
||
| 98 | if(print) |
||
| 99 | { |
||
| 100 | Piep(cells, 200); |
||
| 101 | printf(" %d Cells ", cells); |
||
| 102 | } |
||
| 103 | } |
||
| 104 | else BattLowVoltageWarning = EE_Parameter.UnterspannungsWarnung; |
||
| 105 | if(print) printf(" Low warning level: %d.%d",BattLowVoltageWarning/10,BattLowVoltageWarning%10); |
||
| 106 | } |
||
| 107 | |||
| 108 | //############################################################################ |
||
| 109 | //Hauptprogramm |
||
| 110 | int main (void) |
||
| 111 | //############################################################################ |
||
| 112 | { |
||
| 113 | unsigned int timer,i,timer2 = 0, timerPolling; |
||
| 114 | |||
| 115 | DDRB = 0x00; |
||
| 116 | PORTB = 0x00; |
||
| 117 | for(timer = 0; timer < 1000; timer++); // verzögern |
||
| 118 | #if (defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__)) |
||
| 119 | PlatinenVersion = 21; |
||
| 120 | #else |
||
| 121 | if(PINB & 0x01) |
||
| 122 | { |
||
| 123 | if(PINB & 0x02) PlatinenVersion = 13; |
||
| 124 | else PlatinenVersion = 11; |
||
| 125 | } |
||
| 126 | else |
||
| 127 | { |
||
| 128 | if(PINB & 0x02) PlatinenVersion = 20; |
||
| 129 | else PlatinenVersion = 10; |
||
| 130 | } |
||
| 131 | #endif |
||
| 132 | DDRC = 0x81; // SCL |
||
| 133 | DDRC |=0x40; // HEF4017 Reset |
||
| 134 | PORTC = 0xff; // Pullup SDA |
||
| 135 | DDRB = 0x1B; // LEDs und Druckoffset |
||
| 136 | PORTB = 0x01; // LED_Rot |
||
| 137 | DDRD = 0x3E; // Speaker & TXD & J3 J4 J5 |
||
| 138 | PORTD = 0x47; // LED |
||
| 139 | HEF4017R_ON; |
||
| 140 | MCUSR &=~(1<<WDRF); |
||
| 141 | WDTCSR |= (1<<WDCE)|(1<<WDE); |
||
| 142 | WDTCSR = 0; |
||
| 143 | |||
| 144 | beeptime = 2500; |
||
| 145 | StickGier = 0; PPM_in[K_GAS] = 0; StickRoll = 0; StickNick = 0; |
||
| 146 | if(PlatinenVersion >= 20) GIER_GRAD_FAKTOR = 1220; else GIER_GRAD_FAKTOR = 1291; // unterschiedlich für ME und ENC |
||
| 147 | ROT_OFF; |
||
| 148 | |||
| 149 | Timer_Init(); |
||
| 150 | TIMER2_Init(); |
||
| 151 | UART_Init(); |
||
| 152 | rc_sum_init(); |
||
| 153 | ADC_Init(); |
||
| 154 | I2C_Init(); |
||
| 155 | SPI_MasterInit(); |
||
| 156 | Capacity_Init(); |
||
| 157 | LIBFC_Init(); |
||
| 158 | GRN_ON; |
||
| 159 | sei(); |
||
| 160 | ParamSet_Init(); |
||
| 161 | |||
| 162 | |||
| 163 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
| 164 | // + Check connected BL-Ctrls |
||
| 165 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
| 166 | // Check connected BL-Ctrls |
||
| 167 | BLFlags |= BLFLAG_READ_VERSION; |
||
| 168 | motor_read = 0; // read the first I2C-Data |
||
| 169 | SendMotorData(); |
||
| 170 | timer = SetDelay(500); |
||
| 171 | while(!(BLFlags & BLFLAG_TX_COMPLETE) && !CheckDelay(timer)); //wait for complete transfer |
||
| 172 | |||
| 173 | printf("\n\rFound BL-Ctrl: "); |
||
| 174 | timer = SetDelay(4000); |
||
| 175 | for(i=0; i < MAX_MOTORS; i++) |
||
| 176 | { |
||
| 177 | SendMotorData(); |
||
| 178 | while(!(BLFlags & BLFLAG_TX_COMPLETE) && !CheckDelay(timer)); //wait for complete transfer |
||
| 179 | if(Mixer.Motor[i][0] > 0) // wait max 4 sec for the BL-Ctrls to wake up |
||
| 180 | { |
||
| 181 | while(!CheckDelay(timer) && !(Motor[i].State & MOTOR_STATE_PRESENT_MASK) ) |
||
| 182 | { |
||
| 183 | SendMotorData(); |
||
| 184 | while(!(BLFlags & BLFLAG_TX_COMPLETE) && !CheckDelay(timer)); //wait for complete transfer |
||
| 185 | } |
||
| 186 | } |
||
| 187 | if(Motor[i].State & MOTOR_STATE_PRESENT_MASK) |
||
| 188 | { |
||
| 189 | printf("%d",i+1); |
||
| 190 | FoundMotors++; |
||
| 191 | // if(Motor[i].Version & MOTOR_STATE_NEW_PROTOCOL_MASK) printf("(new) "); |
||
| 192 | } |
||
| 193 | } |
||
| 194 | for(i=0; i < MAX_MOTORS; i++) |
||
| 195 | { |
||
| 196 | if(!(Motor[i].State & MOTOR_STATE_PRESENT_MASK) && Mixer.Motor[i][0] > 0) |
||
| 197 | { |
||
| 198 | printf("\n\r\n\r!! MISSING BL-CTRL: %d !!",i+1); |
||
| 199 | ServoActive = 2; // just in case the FC would be used as camera-stabilizer |
||
| 200 | } |
||
| 201 | Motor[i].State &= ~MOTOR_STATE_ERROR_MASK; // clear error counter |
||
| 202 | } |
||
| 203 | printf("\n\r==================================="); |
||
| 204 | |||
| 205 | if(RequiredMotors < FoundMotors) VersionInfo.HardwareError[1] |= DEFEKT_MIXER_ERR; |
||
| 206 | |||
| 207 | //if(EE_Parameter.GlobalConfig & CFG_HOEHENREGELUNG) |
||
| 208 | { |
||
| 209 | printf("\n\rCalibrating pressure sensor.."); |
||
| 210 | timer = SetDelay(1000); |
||
| 211 | SucheLuftruckOffset(); |
||
| 212 | while (!CheckDelay(timer)); |
||
| 213 | printf("OK\n\r"); |
||
| 214 | } |
||
| 215 | |||
| 216 | SetNeutral(0); |
||
| 217 | |||
| 218 | ROT_OFF; |
||
| 219 | |||
| 220 | beeptime = 2000; |
||
| 221 | ExternControl.Digital[0] = 0x55; |
||
| 222 | |||
| 223 | |||
| 224 | FlugMinuten = (unsigned int)GetParamByte(PID_FLIGHT_MINUTES) * 256 + (unsigned int)GetParamByte(PID_FLIGHT_MINUTES + 1); |
||
| 225 | FlugMinutenGesamt = (unsigned int)GetParamByte(PID_FLIGHT_MINUTES_TOTAL) * 256 + (unsigned int)GetParamByte(PID_FLIGHT_MINUTES_TOTAL + 1); |
||
| 226 | |||
| 227 | if((FlugMinutenGesamt == 0xFFFF) || (FlugMinuten == 0xFFFF)) |
||
| 228 | { |
||
| 229 | FlugMinuten = 0; |
||
| 230 | FlugMinutenGesamt = 0; |
||
| 231 | } |
||
| 232 | printf("\n\rFlight-time %u min Total:%u min", FlugMinuten, FlugMinutenGesamt); |
||
| 233 | |||
| 234 | printf("\n\rControl: "); |
||
| 235 | if (EE_Parameter.GlobalConfig & CFG_HEADING_HOLD) printf("HeadingHold"); |
||
| 236 | else printf("Normal (ACC-Mode)"); |
||
| 237 | |||
| 238 | LcdClear(); |
||
| 239 | I2CTimeout = 5000; |
||
| 240 | WinkelOut.Orientation = 1; |
||
| 241 | LipoDetection(1); |
||
| 242 | |||
| 243 | LIBFC_ReceiverInit(EE_Parameter.Receiver); |
||
| 244 | |||
| 245 | printf("\n\r===================================\n\r"); |
||
| 246 | //SpektrumBinding(); |
||
| 247 | timer = SetDelay(2000); |
||
| 248 | timerPolling = SetDelay(250); |
||
| 249 | |||
| 250 | Debug(ANSI_CLEAR "FC-Start!\n\rFlugzeit: %d min", FlugMinutenGesamt); // Note: this won't waste flash memory, if #DEBUG is not active |
||
| 251 | DebugOut.Status[0] = 0x01 | 0x02; |
||
| 252 | |||
| 253 | while (1) |
||
| 254 | { |
||
| 255 | if(CheckDelay(timerPolling)) |
||
| 256 | { |
||
| 257 | timerPolling = SetDelay(100); |
||
| 258 | LIBFC_Polling(); |
||
| 259 | } |
||
| 260 | if(UpdateMotor && AdReady) // ReglerIntervall |
||
| 261 | { |
||
| 262 | UpdateMotor=0; |
||
| 263 | if(WinkelOut.CalcState) CalMk3Mag(); |
||
| 264 | else MotorRegler(); |
||
| 265 | SendMotorData(); |
||
| 266 | ROT_OFF; |
||
| 267 | if(SenderOkay) { SenderOkay--; VersionInfo.HardwareError[1] &= ~DEFEKT_PPM_ERR; } |
||
| 268 | else |
||
| 269 | { |
||
| 270 | TIMSK1 |= _BV(ICIE1); // enable PPM-Input |
||
| 271 | PPM_in[0] = 0; // set RSSI to zero on data timeout |
||
| 272 | VersionInfo.HardwareError[1] |= DEFEKT_PPM_ERR; |
||
| 273 | } |
||
| 274 | //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
| 275 | //if(HoehenReglerAktiv && NaviDataOkay && SenderOkay < 160 && SenderOkay > 10 && FromNaviCtrl_Value.SerialDataOkay > 220) SenderOkay = 160; |
||
| 276 | //if(HoehenReglerAktiv && NaviDataOkay && SenderOkay < 101 && SenderOkay > 10 && FromNaviCtrl_Value.SerialDataOkay > 1) SenderOkay = 101; |
||
| 277 | //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
| 278 | if(!--I2CTimeout || MissingMotor) |
||
| 279 | { |
||
| 280 | if(!I2CTimeout) |
||
| 281 | { |
||
| 282 | I2C_Reset(); |
||
| 283 | I2CTimeout = 5; |
||
| 284 | DebugOut.Analog[28]++; // I2C-Error |
||
| 285 | FCFlags |= FCFLAG_I2CERR; |
||
| 286 | VersionInfo.HardwareError[1] |= DEFEKT_I2C; |
||
| 287 | DebugOut.Status[1] |= 0x02; // BL-Error-Status |
||
| 288 | } |
||
| 289 | if((BeepMuster == 0xffff) && MotorenEin) |
||
| 290 | { |
||
| 291 | beeptime = 10000; |
||
| 292 | BeepMuster = 0x0080; |
||
| 293 | } |
||
| 294 | } |
||
| 295 | else |
||
| 296 | { |
||
| 297 | ROT_OFF; |
||
| 298 | if(!beeptime) |
||
| 299 | { |
||
| 300 | FCFlags &= ~FCFLAG_I2CERR; |
||
| 301 | } |
||
| 302 | } |
||
| 303 | if(!UpdateMotor) |
||
| 304 | { |
||
| 305 | DatenUebertragung(); |
||
| 306 | BearbeiteRxDaten(); |
||
| 307 | if(CheckDelay(timer)) |
||
| 308 | { |
||
| 309 | static unsigned char second; |
||
| 310 | timer += 20; // 20 ms interval |
||
| 311 | if(MissingMotor) |
||
| 312 | { |
||
| 313 | VersionInfo.HardwareError[1] |= DEFEKT_BL_MISSING; |
||
| 314 | DebugOut.Status[1] |= 0x02; // BL-Error-Status |
||
| 315 | } |
||
| 316 | else |
||
| 317 | { |
||
| 318 | VersionInfo.HardwareError[1] &= ~DEFEKT_BL_MISSING; |
||
| 319 | if(I2CTimeout > 6) DebugOut.Status[1] &= ~0x02; // BL-Error-Status |
||
| 320 | } |
||
| 321 | |||
| 322 | if(I2CTimeout > 6) VersionInfo.HardwareError[1] &= ~DEFEKT_I2C; |
||
| 323 | |||
| 324 | if(PcZugriff) PcZugriff--; |
||
| 325 | else |
||
| 326 | { |
||
| 327 | ExternControl.Config = 0; |
||
| 328 | ExternStickNick = 0; |
||
| 329 | ExternStickRoll = 0; |
||
| 330 | ExternStickGier = 0; |
||
| 331 | if(BeepMuster == 0xffff && SenderOkay == 0) |
||
| 332 | { |
||
| 333 | beeptime = 15000; |
||
| 334 | BeepMuster = 0x0c00; |
||
| 335 | } |
||
| 336 | } |
||
| 337 | if(NaviDataOkay > 200) |
||
| 338 | { |
||
| 339 | NaviDataOkay--; |
||
| 340 | FCFlags &= ~FCFLAG_SPI_RX_ERR; |
||
| 341 | VersionInfo.HardwareError[1] &= ~DEFEKT_SPI_RX_ERR; |
||
| 342 | } |
||
| 343 | else |
||
| 344 | { |
||
| 345 | if(NC_Version.Compatible) |
||
| 346 | { |
||
| 347 | FCFlags |= FCFLAG_SPI_RX_ERR; |
||
| 348 | VersionInfo.HardwareError[1] |= DEFEKT_SPI_RX_ERR; |
||
| 349 | if(BeepMuster == 0xffff && MotorenEin) |
||
| 350 | { |
||
| 351 | beeptime = 15000; |
||
| 352 | BeepMuster = 0xA800; |
||
| 353 | } |
||
| 354 | } |
||
| 355 | GPS_Nick = 0; |
||
| 356 | GPS_Roll = 0; |
||
| 357 | //if(!beeptime) |
||
| 358 | FromNaviCtrl.CompassValue = -1; |
||
| 359 | NaviDataOkay = 0; |
||
| 360 | } |
||
| 361 | if(UBat < BattLowVoltageWarning) |
||
| 362 | { |
||
| 363 | FCFlags |= FCFLAG_LOWBAT; |
||
| 364 | if(BeepMuster == 0xffff) |
||
| 365 | { |
||
| 366 | beeptime = 6000; |
||
| 367 | BeepMuster = 0x0300; |
||
| 368 | } |
||
| 369 | } |
||
| 370 | else if(!beeptime) FCFlags &= ~FCFLAG_LOWBAT; |
||
| 371 | |||
| 372 | SPI_StartTransmitPacket(); |
||
| 373 | SendSPI = 4; |
||
| 374 | if(!MotorenEin) timer2 = 1450; // 0,5 Minuten aufrunden |
||
| 375 | else |
||
| 376 | if(++second == 49) |
||
| 377 | { |
||
| 378 | second = 0; |
||
| 379 | FlugSekunden++; |
||
| 380 | } |
||
| 381 | if(++timer2 == 2930) // eine Minute |
||
| 382 | { |
||
| 383 | timer2 = 0; |
||
| 384 | FlugMinuten++; |
||
| 385 | FlugMinutenGesamt++; |
||
| 386 | SetParamByte(PID_FLIGHT_MINUTES,FlugMinuten / 256); |
||
| 387 | SetParamByte(PID_FLIGHT_MINUTES+1,FlugMinuten % 256); |
||
| 388 | SetParamByte(PID_FLIGHT_MINUTES_TOTAL,FlugMinutenGesamt / 256); |
||
| 389 | SetParamByte(PID_FLIGHT_MINUTES_TOTAL+1,FlugMinutenGesamt % 256); |
||
| 390 | timer = SetDelay(20); // falls "timer += 20;" mal nicht geht |
||
| 391 | } |
||
| 392 | } |
||
| 393 | LED_Update(); |
||
| 394 | Capacity_Update(); |
||
| 395 | } |
||
| 396 | } |
||
| 397 | if(!SendSPI) { SPI_TransmitByte(); } |
||
| 398 | } |
||
| 399 | return (1); |
||
| 400 | } |
||
| 401 | |||
| 402 |