Go to most recent revision | Details | Last modification | View Log | RSS feed
| Rev | Author | Line No. | Line |
|---|---|---|---|
| 2248 | - | 1 | /***************************************************************************************************************************** |
| 2 | * File: eeprom.c |
||
| 3 | * |
||
| 4 | * Purpose: storing or loading the EEPROM values to RAM or writing them to EE_Parameter |
||
| 5 | * |
||
| 6 | * Functions: void DefaultStickMapping(void) // stick setting at RC control for incoming sum signal chain |
||
| 7 | * void DefaultKonstanten3(void) // |
||
| 8 | * void DefaultKonstanten2(void) // |
||
| 9 | * void DefaultKonstanten1(void) // |
||
| 10 | * void ReadParameterSet(unsigned char number, unsigned char *buffer, unsigned char length) |
||
| 11 | * void WriteParameterSet(unsigned char number, unsigned char *buffer, unsigned char length) |
||
| 12 | * unsigned char GetActiveParamSetNumber(void) |
||
| 13 | * void SetActiveParamSetNumber(unsigned char number) |
||
| 14 | * |
||
| 15 | *****************************************************************************************************************************/ |
||
| 16 | #include "eeprom.h" |
||
| 17 | |||
| 18 | |||
| 19 | unsigned char EEPromArray[E2END+1] EEMEM; // E2END = 2047 |
||
| 20 | // wird im EEPROM deklariert |
||
| 21 | // in den I/O-Headern wird die letzte EEPROM-Adresse als E2END definiert |
||
| 22 | // #define EEMEM __attribute__ ((section (".eeprom"))) |
||
| 23 | // EEPROM Size = 2 Kbytes // Page Size = 8 bytes // No. of Pages = 256 // siehe Atmega644 manual S287 |
||
| 24 | |||
| 25 | |||
| 26 | // --------------------------------------------------------------------------------------------------------------------------- |
||
| 27 | // + Konstanten |
||
| 28 | // + 0-250 -> normale Werte |
||
| 29 | // + 251 -> Poti1 |
||
| 30 | // + 252 -> Poti2 |
||
| 31 | // + 253 -> Poti3 |
||
| 32 | // --------------------------------------------------------------------------------------------------------------------------- |
||
| 33 | |||
| 34 | |||
| 35 | //----------------------------------------------------------------------------------------------------------------------------- |
||
| 36 | // stick setting at RC control for incoming sum signal chain |
||
| 37 | //----------------------------------------------------------------------------------------------------------------------------- |
||
| 38 | void DefaultStickMapping(void) // remote control is set to mode 2 |
||
| 39 | { |
||
| 40 | EE_Parameter.Kanalbelegung[K_NICK] = 3; // #define K_NICK 0 // Koptertool -> Einstellungen -> Kanäle -> "NICK" |
||
| 41 | EE_Parameter.Kanalbelegung[K_ROLL] = 2; // #define K_ROLL 1 // Koptertool -> Einstellungen -> Kanäle -> "ROLL" |
||
| 42 | EE_Parameter.Kanalbelegung[K_GAS] = 1; // #define K_GAS 2 // Koptertool -> Einstellungen -> Kanäle -> "GAS" |
||
| 43 | EE_Parameter.Kanalbelegung[K_GIER] = 4; // #define K_GIER 3 // Koptertool -> Einstellungen -> Kanäle -> "Gier" |
||
| 44 | EE_Parameter.Kanalbelegung[K_POTI1] = 5; // #define K_POTI1 4 // Koptertool -> Einstellungen -> Kanäle -> "POTI1" |
||
| 45 | EE_Parameter.Kanalbelegung[K_POTI2] = 6; // #define K_POTI2 5 // Koptertool -> Einstellungen -> Kanäle -> "POTI2" |
||
| 46 | EE_Parameter.Kanalbelegung[K_POTI3] = 7; // #define K_POTI3 6 // Koptertool -> Einstellungen -> Kanäle -> "POTI3" |
||
| 47 | EE_Parameter.Kanalbelegung[K_POTI4] = 8; // #define K_POTI4 7 // Koptertool -> Einstellungen -> Kanäle -> "POTI4" |
||
| 48 | } |
||
| 49 | //----------------------------------------------------------------------------------------------------------------------------- |
||
| 50 | |||
| 51 | |||
| 52 | |||
| 53 | //----------------------------------------------------------------------------------------------------------------------------- |
||
| 54 | void DefaultKonstanten3(void) |
||
| 55 | { |
||
| 56 | EE_Parameter.GlobalConfig = CFG_KOMPASS_AKTIV; |
||
| 57 | // |
||
| 58 | // #define CFG_HOEHENREGELUNG 0x01 |
||
| 59 | // #define CFG_HOEHEN_SCHALTER 0x02 |
||
| 60 | // #define CFG_HEADING_HOLD 0x04 |
||
| 61 | // #define CFG_KOMPASS_AKTIV 0x08 |
||
| 62 | // #define CFG_KOMPASS_FIX 0x10 |
||
| 63 | // #define CFG_GPS_AKTIV 0x20 |
||
| 64 | // #define CFG_ACHSENKOPPLUNG_AKTIV 0x40 |
||
| 65 | // #define CFG_DREHRATEN_BEGRENZER 0x80 |
||
| 66 | |||
| 67 | EE_Parameter.ExtraConfig = CFG2_HEIGHT_LIMIT; |
||
| 68 | // |
||
| 69 | // #define CFG2_HEIGHT_LIMIT 0x01 // Koptertool -> Einstellungen -> Höhe -> Höhenregelung aktiv -> "Höhenbegrenzung" |
||
| 70 | // #define CFG2_VARIO_BEEP 0x02 // Koptertool -> Einstellungen -> Höhe -> Höhenregelung aktiv -> "akustisches Variometer" |
||
| 71 | // #define CFG_SENSITIVE_RC 0x04 // Koptertool -> Einstellungen -> Konfiguration -> "Erweiterte Empfangssignalprüfung" |
||
| 72 | // #define CFG_3_3V_REFERENCE 0x08 // Koptertool -> Einstellungen -> Verschiedenes -> "Voltage Reference" 3.0V |
||
| 73 | // #define CFG_NO_RCOFF_BEEPING 0x10 // Koptertool -> Einstellungen -> Verschiedenes -> "kein Signalton ohne aktiven Empfänger" |
||
| 74 | // #define CFG_GPS_AID 0x20 // Koptertool -> ??? |
||
| 75 | // #define CFG_LEARNABLE_CAREFREE 0x40 // Koptertool -> Einstellungen -> Easy Setup -> "Teachable Carefree" |
||
| 76 | // #define CFG_IGNORE_MAG_ERR_AT_STARTUP 0x80 |
||
| 77 | |||
| 78 | EE_Parameter.Hoehe_MinGas = 30; |
||
| 79 | EE_Parameter.MaxHoehe = 251; // Wert : 0-250 251 -> Poti1 |
||
| 80 | EE_Parameter.Hoehe_P = 10; // Wert : 0-32 |
||
| 81 | EE_Parameter.Luftdruck_D = 30; // Wert : 0-250 |
||
| 82 | EE_Parameter.Hoehe_ACC_Wirkung = 30; // Wert : 0-250 |
||
| 83 | EE_Parameter.Hoehe_HoverBand = 5; // Wert : 0-250 |
||
| 84 | EE_Parameter.Hoehe_GPS_Z = 64; // Wert : 0-250 |
||
| 85 | EE_Parameter.Hoehe_StickNeutralPoint = 0; // Wert : 0-250 (0 = Hoover-Estimation) |
||
| 86 | EE_Parameter.Hoehe_Verstaerkung = 15; // Wert : 0-50 |
||
| 87 | EE_Parameter.Stick_P = 8; // Wert : 1-6 |
||
| 88 | EE_Parameter.Stick_D = 16; // Wert : 0-64 |
||
| 89 | EE_Parameter.Gier_P = 6; // Wert : 1-20 |
||
| 90 | EE_Parameter.Gas_Min = 8; // Wert : 0-32 |
||
| 91 | EE_Parameter.Gas_Max = 230; // Wert : 33-250 |
||
| 92 | EE_Parameter.GyroAccFaktor = 30; // Wert : 1-64 |
||
| 93 | EE_Parameter.KompassWirkung = 128; // Wert : 0-250 |
||
| 94 | EE_Parameter.Gyro_P = 100; // Wert : 0-250 |
||
| 95 | EE_Parameter.Gyro_I = 120; // Wert : 0-250 |
||
| 96 | EE_Parameter.Gyro_D = 3; // Wert : 0-250 |
||
| 97 | EE_Parameter.Gyro_Gier_P = 100; // Wert : 0-250 |
||
| 98 | EE_Parameter.Gyro_Gier_I = 120; // Wert : 0-250 |
||
| 99 | EE_Parameter.UnterspannungsWarnung = 33; // Wert : 0-250 // Automatische Zellenerkennung bei < 50 |
||
| 100 | EE_Parameter.NotGas = 35; // Wert : 0-250 // Gaswert bei Empangsverlust |
||
| 101 | EE_Parameter.NotGasZeit = 20; // Wert : 0-250 // Zeit bis auf NotGas geschaltet wird, wg. Rx-Problemen |
||
| 102 | EE_Parameter.UfoAusrichtung = 0; // X oder + Formation |
||
| 103 | EE_Parameter.I_Faktor = 16; |
||
| 104 | |||
| 105 | EE_Parameter.UserParam1 = 0; // zur freien Verwendung |
||
| 106 | EE_Parameter.UserParam2 = 0; // zur freien Verwendung |
||
| 107 | EE_Parameter.UserParam3 = 0; // zur freien Verwendung |
||
| 108 | EE_Parameter.UserParam4 = 0; // zur freien Verwendung |
||
| 109 | EE_Parameter.UserParam5 = 0; // zur freien Verwendung |
||
| 110 | EE_Parameter.UserParam6 = 0; // zur freien Verwendung |
||
| 111 | EE_Parameter.UserParam7 = 0; // zur freien Verwendung |
||
| 112 | EE_Parameter.UserParam8 = 0; // zur freien Verwendung |
||
| 113 | |||
| 114 | EE_Parameter.ServoNickControl = 100; // Wert : 0-250 // Stellung des Servos |
||
| 115 | EE_Parameter.ServoNickComp = 40; // Wert : 0-250 // Einfluss Gyro/Servo |
||
| 116 | EE_Parameter.ServoCompInvert = 1; // Wert : 0-250 // Richtung Einfluss Gyro/Servo |
||
| 117 | EE_Parameter.ServoNickMin = 0; // Wert : 0-250 // Anschlag |
||
| 118 | EE_Parameter.ServoNickMax = 250; // Wert : 0-250 // Anschlag |
||
| 119 | EE_Parameter.ServoNickRefresh = 6; |
||
| 120 | EE_Parameter.ServoRollControl = 100; // Wert : 0-250 // Stellung des Servos |
||
| 121 | EE_Parameter.ServoRollComp = 40; // Wert : 0-250 // Einfluss Gyro/Servo |
||
| 122 | EE_Parameter.ServoRollMin = 0; // Wert : 0-250 // Anschlag |
||
| 123 | EE_Parameter.ServoRollMax = 250; // Wert : 0-250 // Anschlag |
||
| 124 | |||
| 125 | EE_Parameter.LoopGasLimit = 50; |
||
| 126 | EE_Parameter.LoopThreshold = 90; // Wert: 0-250 Schwelle für Stickausschlag |
||
| 127 | EE_Parameter.LoopHysterese = 50; |
||
| 128 | |||
| 129 | EE_Parameter.BitConfig = 0; // Bitcodiert: 0x01=oben, 0x02=unten, 0x04=links, 0x08=rechts |
||
| 130 | EE_Parameter.AchsKopplung1 = 90; |
||
| 131 | EE_Parameter.AchsKopplung2 = 80; |
||
| 132 | EE_Parameter.CouplingYawCorrection = 70; |
||
| 133 | EE_Parameter.WinkelUmschlagNick = 85; |
||
| 134 | EE_Parameter.WinkelUmschlagRoll = 85; |
||
| 135 | EE_Parameter.GyroAccAbgleich = 32; // 1/k |
||
| 136 | EE_Parameter.Driftkomp = 32; |
||
| 137 | EE_Parameter.DynamicStability = 50; |
||
| 138 | EE_Parameter.J16Bitmask = 95; |
||
| 139 | EE_Parameter.J17Bitmask = 243; |
||
| 140 | EE_Parameter.WARN_J16_Bitmask = 0xAA; |
||
| 141 | EE_Parameter.WARN_J17_Bitmask = 0xAA; |
||
| 142 | EE_Parameter.J16Timing = 30; |
||
| 143 | EE_Parameter.J17Timing = 30; |
||
| 144 | |||
| 145 | EE_Parameter.NaviGpsModeControl = 252; |
||
| 146 | EE_Parameter.NaviGpsGain = 100; |
||
| 147 | EE_Parameter.NaviGpsP = 90; |
||
| 148 | EE_Parameter.NaviGpsI = 90; |
||
| 149 | EE_Parameter.NaviGpsD = 90; |
||
| 150 | EE_Parameter.NaviGpsPLimit = 75; |
||
| 151 | EE_Parameter.NaviGpsILimit = 75; |
||
| 152 | EE_Parameter.NaviGpsDLimit = 75; |
||
| 153 | EE_Parameter.NaviGpsACC = 0; |
||
| 154 | EE_Parameter.NaviGpsMinSat = 6; |
||
| 155 | EE_Parameter.NaviStickThreshold = 8; |
||
| 156 | EE_Parameter.NaviWindCorrection = 90; |
||
| 157 | EE_Parameter.NaviSpeedCompensation = 30; |
||
| 158 | EE_Parameter.NaviOperatingRadius = 100; |
||
| 159 | EE_Parameter.NaviAngleLimitation = 100; |
||
| 160 | EE_Parameter.NaviPH_LoginTime = 4; |
||
| 161 | memcpy(EE_Parameter.Name, "Beginner\0", 12); |
||
| 162 | } |
||
| 163 | //----------------------------------------------------------------------------------------------------------------------------- |
||
| 164 | |||
| 165 | |||
| 166 | |||
| 167 | |||
| 168 | //----------------------------------------------------------------------------------------------------------------------------- |
||
| 169 | void DefaultKonstanten2(void) |
||
| 170 | { |
||
| 171 | EE_Parameter.GlobalConfig = CFG_ACHSENKOPPLUNG_AKTIV | CFG_KOMPASS_AKTIV | CFG_GPS_AKTIV | CFG_HOEHEN_SCHALTER; |
||
| 172 | EE_Parameter.ExtraConfig = CFG2_HEIGHT_LIMIT;// | CFG2_VARIO_BEEP | CFG_SENSITIVE_RC |
||
| 173 | EE_Parameter.Hoehe_MinGas = 30; |
||
| 174 | EE_Parameter.MaxHoehe = 251; // Wert : 0-250 251 -> Poti1 |
||
| 175 | EE_Parameter.Hoehe_P = 10; // Wert : 0-32 |
||
| 176 | EE_Parameter.Luftdruck_D = 30; // Wert : 0-250 |
||
| 177 | EE_Parameter.Hoehe_ACC_Wirkung = 30; // Wert : 0-250 |
||
| 178 | EE_Parameter.Hoehe_HoverBand = 5; // Wert : 0-250 |
||
| 179 | EE_Parameter.Hoehe_GPS_Z = 64; // Wert : 0-250 |
||
| 180 | EE_Parameter.Hoehe_StickNeutralPoint = 0; // Wert : 0-250 (0 = Hoover-Estimation) |
||
| 181 | EE_Parameter.Hoehe_Verstaerkung = 15; // Wert : 0-50 |
||
| 182 | EE_Parameter.Stick_P = 10; // Wert : 1-6 |
||
| 183 | EE_Parameter.Stick_D = 16; // Wert : 0-64 |
||
| 184 | EE_Parameter.Gier_P = 6; // Wert : 1-20 |
||
| 185 | EE_Parameter.Gas_Min = 8; // Wert : 0-32 |
||
| 186 | EE_Parameter.Gas_Max = 230; // Wert : 33-250 |
||
| 187 | EE_Parameter.GyroAccFaktor = 30; // Wert : 1-64 |
||
| 188 | EE_Parameter.KompassWirkung = 128; // Wert : 0-250 |
||
| 189 | EE_Parameter.Gyro_P = 90; // Wert : 0-250 |
||
| 190 | EE_Parameter.Gyro_I = 120; // Wert : 0-250 |
||
| 191 | EE_Parameter.Gyro_D = 3; // Wert : 0-250 |
||
| 192 | EE_Parameter.Gyro_Gier_P = 90; // Wert : 0-250 |
||
| 193 | EE_Parameter.Gyro_Gier_I = 120; // Wert : 0-250 |
||
| 194 | EE_Parameter.UnterspannungsWarnung = 33; // Wert : 0-250 ( Automatische Zellenerkennung bei < 50) |
||
| 195 | EE_Parameter.NotGas = 35; // Wert : 0-250 // Gaswert bei Empangsverlust |
||
| 196 | EE_Parameter.NotGasZeit = 30; // Wert : 0-250 // Zeit bis auf NotGas geschaltet wird, wg. Rx-Problemen |
||
| 197 | EE_Parameter.UfoAusrichtung = 0; // X oder + Formation |
||
| 198 | EE_Parameter.I_Faktor = 32; |
||
| 199 | EE_Parameter.UserParam1 = 0; // zur freien Verwendung |
||
| 200 | EE_Parameter.UserParam2 = 0; // zur freien Verwendung |
||
| 201 | EE_Parameter.UserParam3 = 0; // zur freien Verwendung |
||
| 202 | EE_Parameter.UserParam4 = 0; // zur freien Verwendung |
||
| 203 | EE_Parameter.UserParam5 = 0; // zur freien Verwendung |
||
| 204 | EE_Parameter.UserParam6 = 0; // zur freien Verwendung |
||
| 205 | EE_Parameter.UserParam7 = 0; // zur freien Verwendung |
||
| 206 | EE_Parameter.UserParam8 = 0; // zur freien Verwendung |
||
| 207 | EE_Parameter.ServoNickControl = 100; // Wert : 0-250 // Stellung des Servos |
||
| 208 | EE_Parameter.ServoNickComp = 40; // Wert : 0-250 // Einfluss Gyro/Servo |
||
| 209 | EE_Parameter.ServoCompInvert = 1; // Wert : 0-250 // Richtung Einfluss Gyro/Servo |
||
| 210 | EE_Parameter.ServoNickMin = 0; // Wert : 0-250 // Anschlag |
||
| 211 | EE_Parameter.ServoNickMax = 250; // Wert : 0-250 // Anschlag |
||
| 212 | EE_Parameter.ServoNickRefresh = 6; |
||
| 213 | EE_Parameter.ServoRollControl = 100; // Wert : 0-250 // Stellung des Servos |
||
| 214 | EE_Parameter.ServoRollComp = 40; // Wert : 0-250 // Einfluss Gyro/Servo |
||
| 215 | EE_Parameter.ServoRollMin = 0; // Wert : 0-250 // Anschlag |
||
| 216 | EE_Parameter.ServoRollMax = 250; // Wert : 0-250 // Anschlag |
||
| 217 | EE_Parameter.LoopGasLimit = 50; |
||
| 218 | EE_Parameter.LoopThreshold = 90; // Wert: 0-250 Schwelle für Stickausschlag |
||
| 219 | EE_Parameter.LoopHysterese = 50; |
||
| 220 | EE_Parameter.BitConfig = 0; // Bitcodiert: 0x01=oben, 0x02=unten, 0x04=links, 0x08=rechts |
||
| 221 | EE_Parameter.AchsKopplung1 = 90; |
||
| 222 | EE_Parameter.AchsKopplung2 = 80; |
||
| 223 | EE_Parameter.CouplingYawCorrection = 60; |
||
| 224 | EE_Parameter.WinkelUmschlagNick = 85; |
||
| 225 | EE_Parameter.WinkelUmschlagRoll = 85; |
||
| 226 | EE_Parameter.GyroAccAbgleich = 32; // 1/k |
||
| 227 | EE_Parameter.Driftkomp = 32; |
||
| 228 | EE_Parameter.DynamicStability = 75; |
||
| 229 | EE_Parameter.J16Bitmask = 95; |
||
| 230 | EE_Parameter.J17Bitmask = 243; |
||
| 231 | EE_Parameter.WARN_J16_Bitmask = 0xAA; |
||
| 232 | EE_Parameter.WARN_J17_Bitmask = 0xAA; |
||
| 233 | EE_Parameter.J16Timing = 20; |
||
| 234 | EE_Parameter.J17Timing = 20; |
||
| 235 | EE_Parameter.NaviGpsModeControl = 252; |
||
| 236 | EE_Parameter.NaviGpsGain = 100; |
||
| 237 | EE_Parameter.NaviGpsP = 90; |
||
| 238 | EE_Parameter.NaviGpsI = 90; |
||
| 239 | EE_Parameter.NaviGpsD = 90; |
||
| 240 | EE_Parameter.NaviGpsPLimit = 75; |
||
| 241 | EE_Parameter.NaviGpsILimit = 75; |
||
| 242 | EE_Parameter.NaviGpsDLimit = 75; |
||
| 243 | EE_Parameter.NaviGpsACC = 0; |
||
| 244 | EE_Parameter.NaviGpsMinSat = 6; |
||
| 245 | EE_Parameter.NaviStickThreshold = 8; |
||
| 246 | EE_Parameter.NaviWindCorrection = 90; |
||
| 247 | EE_Parameter.NaviSpeedCompensation = 30; |
||
| 248 | EE_Parameter.NaviOperatingRadius = 100; |
||
| 249 | EE_Parameter.NaviAngleLimitation = 100; |
||
| 250 | EE_Parameter.NaviPH_LoginTime = 4; |
||
| 251 | memcpy(EE_Parameter.Name, "Normal\0", 12); |
||
| 252 | } |
||
| 253 | //----------------------------------------------------------------------------------------------------------------------------- |
||
| 254 | |||
| 255 | |||
| 256 | |||
| 257 | //----------------------------------------------------------------------------------------------------------------------------- |
||
| 258 | void DefaultKonstanten1(void) |
||
| 259 | { |
||
| 260 | EE_Parameter.GlobalConfig = CFG_ACHSENKOPPLUNG_AKTIV | CFG_KOMPASS_AKTIV | CFG_GPS_AKTIV | CFG_HOEHEN_SCHALTER; |
||
| 261 | EE_Parameter.ExtraConfig = CFG2_HEIGHT_LIMIT;// | CFG2_VARIO_BEEP | CFG_SENSITIVE_RC |
||
| 262 | EE_Parameter.Hoehe_MinGas = 30; |
||
| 263 | EE_Parameter.MaxHoehe = 251; // Wert : 0-250 251 -> Poti1 |
||
| 264 | EE_Parameter.Hoehe_P = 10; // Wert : 0-32 |
||
| 265 | EE_Parameter.Luftdruck_D = 30; // Wert : 0-250 |
||
| 266 | EE_Parameter.Hoehe_ACC_Wirkung = 30; // Wert : 0-250 |
||
| 267 | EE_Parameter.Hoehe_HoverBand = 5; // Wert : 0-250 |
||
| 268 | EE_Parameter.Hoehe_GPS_Z = 64; // Wert : 0-250 |
||
| 269 | EE_Parameter.Hoehe_StickNeutralPoint = 0; // Wert : 0-250 (0 = Hoover-Estimation) |
||
| 270 | EE_Parameter.Hoehe_Verstaerkung = 20; // Wert : 0-50 |
||
| 271 | EE_Parameter.Stick_P = 14; // Wert : 1-6 |
||
| 272 | EE_Parameter.Stick_D = 16; // Wert : 0-64 |
||
| 273 | EE_Parameter.Gier_P = 12; // Wert : 1-20 |
||
| 274 | EE_Parameter.Gas_Min = 8; // Wert : 0-32 |
||
| 275 | EE_Parameter.Gas_Max = 230; // Wert : 33-250 |
||
| 276 | EE_Parameter.GyroAccFaktor = 30; // Wert : 1-64 |
||
| 277 | EE_Parameter.KompassWirkung = 128; // Wert : 0-250 |
||
| 278 | EE_Parameter.Gyro_P = 80; // Wert : 0-250 |
||
| 279 | EE_Parameter.Gyro_I = 150; // Wert : 0-250 |
||
| 280 | EE_Parameter.Gyro_D = 3; // Wert : 0-250 |
||
| 281 | EE_Parameter.Gyro_Gier_P = 80; // Wert : 0-250 |
||
| 282 | EE_Parameter.Gyro_Gier_I = 150; // Wert : 0-250 |
||
| 283 | EE_Parameter.UnterspannungsWarnung = 33; // Wert : 0-250 ( Automatische Zellenerkennung bei < 50) |
||
| 284 | EE_Parameter.NotGas = 35; // Wert : 0-250 // Gaswert bei Empangsverlust |
||
| 285 | EE_Parameter.NotGasZeit = 30; // Wert : 0-250 // Zeit bis auf NotGas geschaltet wird, wg. Rx-Problemen |
||
| 286 | EE_Parameter.UfoAusrichtung = 0; // X oder + Formation |
||
| 287 | EE_Parameter.I_Faktor = 32; |
||
| 288 | EE_Parameter.UserParam1 = 0; // zur freien Verwendung |
||
| 289 | EE_Parameter.UserParam2 = 0; // zur freien Verwendung |
||
| 290 | EE_Parameter.UserParam3 = 0; // zur freien Verwendung |
||
| 291 | EE_Parameter.UserParam4 = 0; // zur freien Verwendung |
||
| 292 | EE_Parameter.UserParam5 = 0; // zur freien Verwendung |
||
| 293 | EE_Parameter.UserParam6 = 0; // zur freien Verwendung |
||
| 294 | EE_Parameter.UserParam7 = 0; // zur freien Verwendung |
||
| 295 | EE_Parameter.UserParam8 = 0; // zur freien Verwendung |
||
| 296 | |||
| 297 | EE_Parameter.ServoNickControl = 100; // Wert : 0-250 // Stellung des Servos |
||
| 298 | EE_Parameter.ServoNickComp = 40; // Wert : 0-250 // Einfluss Gyro/Servo |
||
| 299 | EE_Parameter.ServoCompInvert = 1; // Wert : 0-250 // Richtung Einfluss Gyro/Servo |
||
| 300 | EE_Parameter.ServoNickMin = 0; // Wert : 0-250 // Anschlag |
||
| 301 | EE_Parameter.ServoNickMax = 250; // Wert : 0-250 // Anschlag |
||
| 302 | EE_Parameter.ServoNickRefresh = 6; |
||
| 303 | EE_Parameter.ServoRollControl = 100; // Wert : 0-250 // Stellung des Servos |
||
| 304 | EE_Parameter.ServoRollComp = 40; // Wert : 0-250 // Einfluss Gyro/Servo |
||
| 305 | EE_Parameter.ServoRollMin = 0; // Wert : 0-250 // Anschlag |
||
| 306 | EE_Parameter.ServoRollMax = 250; // Wert : 0-250 // Anschlag |
||
| 307 | EE_Parameter.LoopGasLimit = 50; |
||
| 308 | EE_Parameter.LoopThreshold = 90; // Wert: 0-250 Schwelle für Stickausschlag |
||
| 309 | EE_Parameter.LoopHysterese = 50; |
||
| 310 | EE_Parameter.BitConfig = 0; // Bitcodiert: 0x01=oben, 0x02=unten, 0x04=links, 0x08=rechts / wird getrennt behandelt |
||
| 311 | EE_Parameter.AchsKopplung1 = 90; |
||
| 312 | EE_Parameter.AchsKopplung2 = 80; |
||
| 313 | EE_Parameter.CouplingYawCorrection = 1; |
||
| 314 | EE_Parameter.WinkelUmschlagNick = 85; |
||
| 315 | EE_Parameter.WinkelUmschlagRoll = 85; |
||
| 316 | EE_Parameter.GyroAccAbgleich = 16; // 1/k |
||
| 317 | EE_Parameter.Driftkomp = 32; |
||
| 318 | EE_Parameter.DynamicStability = 100; |
||
| 319 | EE_Parameter.J16Bitmask = 95; |
||
| 320 | EE_Parameter.J17Bitmask = 243; |
||
| 321 | EE_Parameter.WARN_J16_Bitmask = 0xAA; |
||
| 322 | EE_Parameter.WARN_J17_Bitmask = 0xAA; |
||
| 323 | EE_Parameter.J16Timing = 15; |
||
| 324 | EE_Parameter.J17Timing = 15; |
||
| 325 | EE_Parameter.NaviGpsModeControl = 252; |
||
| 326 | EE_Parameter.NaviGpsGain = 100; |
||
| 327 | EE_Parameter.NaviGpsP = 90; |
||
| 328 | EE_Parameter.NaviGpsI = 90; |
||
| 329 | EE_Parameter.NaviGpsD = 90; |
||
| 330 | EE_Parameter.NaviGpsPLimit = 75; |
||
| 331 | EE_Parameter.NaviGpsILimit = 75; |
||
| 332 | EE_Parameter.NaviGpsDLimit = 75; |
||
| 333 | EE_Parameter.NaviGpsACC = 0; |
||
| 334 | EE_Parameter.NaviGpsMinSat = 6; |
||
| 335 | EE_Parameter.NaviStickThreshold = 8; |
||
| 336 | EE_Parameter.NaviWindCorrection = 90; |
||
| 337 | EE_Parameter.NaviSpeedCompensation = 30; |
||
| 338 | EE_Parameter.NaviOperatingRadius = 100; |
||
| 339 | EE_Parameter.NaviAngleLimitation = 100; |
||
| 340 | EE_Parameter.NaviPH_LoginTime = 4; |
||
| 341 | memcpy(EE_Parameter.Name, "Sport\0", 12); |
||
| 342 | } |
||
| 343 | //----------------------------------------------------------------------------------------------------------------------------- |
||
| 344 | |||
| 345 | |||
| 346 | |||
| 347 | //----------------------------------------------------------------------------------------------------- |
||
| 348 | // Parametersatz aus dem EEPROM lesen |
||
| 349 | // Nummer [1..5] möglich |
||
| 350 | //----------------------------------------------------------------------------------------------------- |
||
| 351 | void ReadParameterSet(unsigned char number, unsigned char *buffer, unsigned char length) |
||
| 352 | { |
||
| 353 | if((number > 5)||(number < 1)) number = 3; |
||
| 354 | eeprom_read_block(buffer, &EEPromArray[EEPROM_ADR_PARAM_BEGIN + length * (number - 1)], length); // #define EEPROM_ADR_PARAM_BEGIN 100 |
||
| 355 | LED_Init (); // initialisiert die Schalt-Ausgänge PORTC2 und PORTC3 an SV2 (control of J16 & J17) |
||
| 356 | } |
||
| 357 | //----------------------------------------------------------------------------------------------------- |
||
| 358 | |||
| 359 | |||
| 360 | |||
| 361 | //----------------------------------------------------------------------------------------------------- |
||
| 362 | // Parametersatz vom ROM ins EEPROM schreiben |
||
| 363 | // Nummer [1..5] ist die mögliche Nummer des Paramtersatzes |
||
| 364 | // *buffer ist die Adresse, woher die Bytes kommen, die kopiert werden sollen |
||
| 365 | // length ist die Anzahl der zu kopierenden Bytes |
||
| 366 | //------------------------------------------------------------------------------------------------------------------------------------ |
||
| 367 | void WriteParameterSet(unsigned char number, unsigned char *buffer, unsigned char length) |
||
| 368 | { |
||
| 369 | if(number > 5) number = 5; |
||
| 370 | if(number < 1) return; |
||
| 371 | eeprom_write_block(buffer, &EEPromArray[EEPROM_ADR_PARAM_BEGIN + length * (number - 1)], length); // #define EEPROM_ADR_PARAM_BEGIN 100 |
||
| 372 | // eeprom_write_block(buffer, &EEPromArray[100 + length * (number - 1)], length); // aufgelöst |
||
| 373 | eeprom_write_byte(&EEPromArray[EEPROM_ADR_PARAM_LENGTH], length); // Länge der Datensätze merken // #define EEPROM_ADR_PARAM_LENGTH 98 |
||
| 374 | // eeprom_write_byte(&EEPromArray[98], length); // aufgelöst // lenght = 101 |
||
| 375 | eeprom_write_block(buffer, &EEPromArray[EEPROM_ADR_CHANNELS], 8); // 8 Kanäle merken // #define EEPROM_ADR_CHANNELS 80 |
||
| 376 | // eeprom_write_block(buffer, &EEPromArray[80], 8); // aufgelöst |
||
| 377 | |||
| 378 | SetActiveParamSetNumber(number); |
||
| 379 | LED_Init(); // initialisiert die Schalt-Ausgänge PORTC2 und PORTC3 an SV2 (control of J16 & J17) |
||
| 380 | } |
||
| 381 | //------------------------------------------------------------------------------------------------------------------------------------ |
||
| 382 | |||
| 383 | |||
| 384 | |||
| 385 | //------------------------------------------------------------------------------------------------------------------------------------- |
||
| 386 | unsigned char GetActiveParamSetNumber(void) // hier wird herausgelesen, mit welchem Parametersatz gefolgen werden soll |
||
| 387 | { // Beginner=3,Normal=2,Sport=1 |
||
| 388 | unsigned char set; |
||
| 389 | set = eeprom_read_byte(&EEPromArray[EEPROM_ADR_ACTIVE_SET]); // #define EEPROM_ADR_ACTIVE_SET 2 |
||
| 390 | if((set > 5) || (set < 1)) |
||
| 391 | { |
||
| 392 | set = 3; // default = Beginner |
||
| 393 | SetActiveParamSetNumber(set); // diesen Parametersatz als aktuell merken |
||
| 394 | } |
||
| 395 | return(set); |
||
| 396 | } |
||
| 397 | //------------------------------------------------------------------------------------------------------------------------------------- |
||
| 398 | |||
| 399 | |||
| 400 | |||
| 401 | //------------------------------------------------------------------------------------------------------------------------------------- |
||
| 402 | void SetActiveParamSetNumber(unsigned char number) |
||
| 403 | { |
||
| 404 | if(number > 5) number = 5; |
||
| 405 | if(number < 1) return; // #define EEPROM_ADR_ACTIVE_SET 2 |
||
| 406 | eeprom_write_byte(&EEPromArray[EEPROM_ADR_ACTIVE_SET], number); // diesen Parametersatz im EEPROM als aktuell merken |
||
| 407 | } |
||
| 408 | //------------------------------------------------------------------------------------------------------------------------------------- |
||
| 409 | |||
| 410 | |||
| 411 | |||
| 412 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |