Subversion Repositories FlightCtrl

Rev

Details | Last modification | View Log | RSS feed

Rev Author Line No. Line
1234 ligi 1
/*#######################################################################################
2
Flight Control
3
#######################################################################################*/
4
 
5
#ifndef _FC_H
6
#define _FC_H
7
//#define GIER_GRAD_FAKTOR 1291L // Abhängigkeit zwischen GyroIntegral und Winkel
8
//#define GIER_GRAD_FAKTOR 1160L 
9
extern long GIER_GRAD_FAKTOR; // Abhängigkeit zwischen GyroIntegral und Winkel
10
#define STICK_GAIN 4
11
 
12
#define FLAG_MOTOR_RUN  1
13
#define FLAG_FLY        2
14
#define FLAG_CALIBRATE  4
15
#define FLAG_START      8
16
#define MAX_MOTORS      12
17
 
18
#define CHECK_MIN_MAX(wert,min,max) {if(wert < min) wert = min; else if(wert > max) wert = max;}
19
 
20
extern volatile unsigned char MikroKopterFlags;
21
extern volatile unsigned int I2CTimeout;
22
extern unsigned char Sekunde,Minute;
23
 
24
extern long IntegralNick,IntegralNick2;
25
extern long IntegralRoll,IntegralRoll2;
26
//extern int IntegralNick,IntegralNick2;
27
//extern int IntegralRoll,IntegralRoll2;
28
 
29
extern long Mess_IntegralNick,Mess_IntegralNick2;
30
extern long Mess_IntegralRoll,Mess_IntegralRoll2;
31
extern long IntegralAccNick,IntegralAccRoll;
32
extern volatile long Mess_Integral_Hoch;
33
extern long Integral_Gier,Mess_Integral_Gier,Mess_Integral_Gier2;
34
extern int  KompassValue;
35
extern int  KompassStartwert;
36
extern int  KompassRichtung;
37
extern int  TrimNick, TrimRoll;
38
extern long  ErsatzKompass;
39
extern int   ErsatzKompassInGrad; // Kompasswert in Grad
40
extern int HoehenWert;
41
extern int SollHoehe;
42
extern int MesswertNick,MesswertRoll,MesswertGier;
43
extern int AdNeutralNick,AdNeutralRoll,AdNeutralGier, Mittelwert_AccNick, Mittelwert_AccRoll;
44
extern int NeutralAccX, NeutralAccY,Mittelwert_AccHoch;
45
extern unsigned char HoehenReglerAktiv;
46
extern volatile float NeutralAccZ;
47
extern long Umschlag180Nick, Umschlag180Roll;
48
extern signed int ExternStickNick,ExternStickRoll,ExternStickGier;
49
extern unsigned char Parameter_UserParam1,Parameter_UserParam2,Parameter_UserParam3,Parameter_UserParam4,Parameter_UserParam5,Parameter_UserParam6,Parameter_UserParam7,Parameter_UserParam8;
50
extern int NaviAccNick,NaviAccRoll,NaviCntAcc;
51
extern unsigned int modell_fliegt;
52
void MotorRegler(void);
53
void SendMotorData(void);
54
void CalibrierMittelwert(void);
55
void Mittelwert(void);
56
void SetNeutral(void);
57
void Piep(unsigned char Anzahl, unsigned int dauer);
58
void start_engines(void);
59
extern unsigned char h,m,s;
60
extern volatile unsigned char Timeout ;
61
extern unsigned char CosinusNickWinkel, CosinusRollWinkel;
62
extern int  DiffNick,DiffRoll;
63
extern int  Poti1, Poti2, Poti3, Poti4;
64
extern volatile unsigned char SenderOkay;
65
extern unsigned char RequiredMotors;
66
extern int StickNick,StickRoll,StickGier;
67
extern char MotorenEin;
68
extern void DefaultKonstanten1(void);
69
extern void DefaultKonstanten2(void);
70
extern void DefaultKonstanten3(void);
71
extern void DefaultStickMapping(void);
72
 
73
#define  STRUCT_PARAM_LAENGE  sizeof(EE_Parameter) 
74
struct mk_param_struct
75
 {
76
   unsigned char Kanalbelegung[8];       // GAS[0], GIER[1],NICK[2], ROLL[3], POTI1, POTI2, POTI3
77
   unsigned char GlobalConfig;           // 0x01=Höhenregler aktiv,0x02=Kompass aktiv, 0x04=GPS aktiv, 0x08=Heading Hold aktiv
78
   unsigned char Hoehe_MinGas;           // Wert : 0-100
79
   unsigned char Luftdruck_D;            // Wert : 0-250
80
   unsigned char MaxHoehe;               // Wert : 0-32
81
   unsigned char Hoehe_P;                // Wert : 0-32
82
   unsigned char Hoehe_Verstaerkung;     // Wert : 0-50
83
   unsigned char Hoehe_ACC_Wirkung;      // Wert : 0-250
84
   unsigned char Stick_P;                // Wert : 1-6
85
   unsigned char Stick_D;                // Wert : 0-64
86
   unsigned char Gier_P;                 // Wert : 1-20
87
   unsigned char Gas_Min;                // Wert : 0-32
88
   unsigned char Gas_Max;                // Wert : 33-250
89
   unsigned char GyroAccFaktor;          // Wert : 1-64
90
   unsigned char KompassWirkung;         // Wert : 0-32
91
   unsigned char Gyro_P;                 // Wert : 10-250
92
   unsigned char Gyro_I;                 // Wert : 0-250
93
   unsigned char Gyro_D;                 // Wert : 0-250
94
   unsigned char UnterspannungsWarnung;  // Wert : 0-250
95
   unsigned char NotGas;                 // Wert : 0-250     //Gaswert bei Empängsverlust
96
   unsigned char NotGasZeit;             // Wert : 0-250     // Zeitbis auf NotGas geschaltet wird, wg. Rx-Problemen
97
   unsigned char UfoAusrichtung;         // X oder + Formation
98
   unsigned char I_Faktor;               // Wert : 0-250
99
   unsigned char UserParam1;             // Wert : 0-250
100
   unsigned char UserParam2;             // Wert : 0-250
101
   unsigned char UserParam3;             // Wert : 0-250
102
   unsigned char UserParam4;             // Wert : 0-250
103
   unsigned char ServoNickControl;       // Wert : 0-250     // Stellung des Servos
104
   unsigned char ServoNickComp;          // Wert : 0-250     // Einfluss Gyro/Servo
105
   unsigned char ServoNickMin;           // Wert : 0-250     // Anschlag
106
   unsigned char ServoNickMax;           // Wert : 0-250     // Anschlag
107
//--- Seit V0.75
108
   unsigned char ServoRollControl;       // Wert : 0-250     // Stellung des Servos
109
   unsigned char ServoRollComp;          // Wert : 0-250
110
   unsigned char ServoRollMin;           // Wert : 0-250
111
   unsigned char ServoRollMax;           // Wert : 0-250
112
//---
113
   unsigned char ServoNickRefresh;       //
114
   unsigned char LoopGasLimit;           // Wert: 0-250  max. Gas während Looping
115
   unsigned char LoopThreshold;          // Wert: 0-250  Schwelle für Stickausschlag
116
   unsigned char LoopHysterese;          // Wert: 0-250  Hysterese für Stickausschlag
117
   unsigned char AchsKopplung1;          // Wert: 0-250  Faktor, mit dem Gier die Achsen Roll und Nick koppelt (NickRollMitkopplung)
118
   unsigned char AchsKopplung2;          // Wert: 0-250  Faktor, mit dem Nick und Roll verkoppelt werden
119
   unsigned char CouplingYawCorrection;  // Wert: 0-250  Faktor, mit dem Nick und Roll verkoppelt werden
120
   unsigned char WinkelUmschlagNick;     // Wert: 0-250  180°-Punkt
121
   unsigned char WinkelUmschlagRoll;     // Wert: 0-250  180°-Punkt
122
   unsigned char GyroAccAbgleich;        // 1/k  (Koppel_ACC_Wirkung)
123
   unsigned char Driftkomp;              
124
   unsigned char DynamicStability;
125
   unsigned char UserParam5;             // Wert : 0-250
126
   unsigned char UserParam6;             // Wert : 0-250
127
   unsigned char UserParam7;             // Wert : 0-250
128
   unsigned char UserParam8;             // Wert : 0-250
129
//---Output ---------------------------------------------
130
   unsigned char J16Bitmask;             // for the J16 Output
131
   unsigned char J16Timing;              // for the J16 Output
132
   unsigned char J17Bitmask;             // for the J17 Output
133
   unsigned char J17Timing;              // for the J17 Output
134
//---NaviCtrl---------------------------------------------
135
   unsigned char NaviGpsModeControl;     // Parameters for the Naviboard
136
   unsigned char NaviGpsGain;    
137
   unsigned char NaviGpsP;        
138
   unsigned char NaviGpsI;        
139
   unsigned char NaviGpsD;        
140
   unsigned char NaviGpsPLimit;        
141
   unsigned char NaviGpsILimit;        
142
   unsigned char NaviGpsDLimit;        
143
   unsigned char NaviGpsACC;        
144
   unsigned char NaviGpsMinSat;        
145
   unsigned char NaviStickThreshold;        
146
   unsigned char NaviWindCorrection;        
147
   unsigned char NaviSpeedCompensation;        
148
   unsigned char NaviOperatingRadius;        
149
   unsigned char NaviAngleLimitation;
150
   unsigned char NaviPH_LoginTime;
151
//---Ext.Ctrl---------------------------------------------
152
   unsigned char ExternalControl;        // for serial Control
153
//------------------------------------------------
154
   unsigned char BitConfig;             // (war Loop-Cfg) Bitcodiert: 0x01=oben, 0x02=unten, 0x04=links, 0x08=rechts / wird getrennt behandelt
155
   unsigned char ServoCompInvert;    // //  0x01 = Nick, 0x02 = Roll   0 oder 1  // WICHTIG!!! am Ende lassen
156
   unsigned char Reserved[4];
157
   char Name[12];
158
 };
159
 
160
struct
161
  {
162
    char Revision;
163
    char Name[12];
164
    signed char Motor[16][4];
165
  } Mixer;
166
 
167
extern struct mk_param_struct EE_Parameter;
168
extern unsigned char Parameter_Luftdruck_D;
169
extern unsigned char Parameter_MaxHoehe;
170
extern unsigned char Parameter_Hoehe_P;
171
extern unsigned char Parameter_Hoehe_ACC_Wirkung;
172
extern unsigned char Parameter_KompassWirkung;
173
extern unsigned char Parameter_Gyro_P;
174
extern unsigned char Parameter_Gyro_I;
175
extern unsigned char Parameter_Gier_P;
176
extern unsigned char Parameter_ServoNickControl;
177
extern unsigned char Parameter_ServoRollControl;
178
extern unsigned char Parameter_AchsKopplung1;
179
extern unsigned char Parameter_AchsKopplung2;
180
//extern unsigned char Parameter_AchsGegenKopplung1;
181
extern unsigned char Parameter_J16Bitmask;             // for the J16 Output
182
extern unsigned char Parameter_J16Timing;              // for the J16 Output
183
extern unsigned char Parameter_J17Bitmask;             // for the J17 Output
184
extern unsigned char Parameter_J17Timing;              // for the J17 Output
185
extern signed char MixerTable[MAX_MOTORS][4];
186
extern unsigned char Motor[MAX_MOTORS];
187
#endif //_FC_H
188