Subversion Repositories FlightCtrl

Rev

Details | Last modification | View Log | RSS feed

Rev Author Line No. Line
1227 killagreg 1
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
2
// + Copyright (c) 04.2007 Holger Buss
3
// + Nur für den privaten Gebrauch
4
// + www.MikroKopter.com
5
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
6
// + Es gilt für das gesamte Projekt (Hardware, Software, Binärfiles, Sourcecode und Dokumentation),
7
// + dass eine Nutzung (auch auszugsweise) nur für den privaten (nicht-kommerziellen) Gebrauch zulässig ist.
8
// + Sollten direkte oder indirekte kommerzielle Absichten verfolgt werden, ist mit uns (info@mikrokopter.de) Kontakt
9
// + bzgl. der Nutzungsbedingungen aufzunehmen.
10
// + Eine kommerzielle Nutzung ist z.B.Verkauf von MikroKoptern, Bestückung und Verkauf von Platinen oder Bausätzen,
11
// + Verkauf von Luftbildaufnahmen, usw.
12
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
13
// + Werden Teile des Quellcodes (mit oder ohne Modifikation) weiterverwendet oder veröffentlicht,
14
// + unterliegen sie auch diesen Nutzungsbedingungen und diese Nutzungsbedingungen incl. Copyright müssen dann beiliegen
15
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
16
// + Sollte die Software (auch auszugesweise) oder sonstige Informationen des MikroKopter-Projekts
17
// + auf anderen Webseiten oder sonstigen Medien veröffentlicht werden, muss unsere Webseite "http://www.mikrokopter.de"
18
// + eindeutig als Ursprung verlinkt werden
19
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
20
// + Keine Gewähr auf Fehlerfreiheit, Vollständigkeit oder Funktion
21
// + Benutzung auf eigene Gefahr
22
// + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden
23
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
24
// + Die Portierung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur
25
// + mit unserer Zustimmung zulässig
26
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
27
// + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen
28
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
29
// + Redistributions of source code (with or without modifications) must retain the above copyright notice,
30
// + this list of conditions and the following disclaimer.
31
// +   * Neither the name of the copyright holders nor the names of contributors may be used to endorse or promote products derived
32
// +     from this software without specific prior written permission.
33
// +   * The use of this project (hardware, software, binary files, sources and documentation) is only permittet
34
// +     for non-commercial use (directly or indirectly)
35
// +     Commercial use (for excample: selling of MikroKopters, selling of PCBs, assembly, ...) is only permitted
36
// +     with our written permission
37
// +   * If sources or documentations are redistributet on other webpages, out webpage (http://www.MikroKopter.de) must be
38
// +     clearly linked as origin
39
// +   * porting to systems other than hardware from www.mikrokopter.de is not allowed
40
// +  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
41
// +  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
42
// +  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
43
// +  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
44
// +  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
45
// +  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
46
// +  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
47
// +  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN// +  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
48
// +  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
49
// +  POSSIBILITY OF SUCH DAMAGE.
50
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
51
#include <inttypes.h>
52
#include <avr/io.h>
53
#include <avr/interrupt.h>
54
#include "eeprom.h"
55
#include "analog.h"
56
#include "main.h"
57
#include "fc.h"
58
#ifdef USE_KILLAGREG
59
#include "mm3.h"
60
#endif
61
#ifdef USE_MK3MAG
62
#include "mk3mag.h"
63
#endif
64
 
65
volatile uint16_t CountMilliseconds = 0;
66
volatile uint8_t UpdateMotor = 0;
67
volatile uint16_t cntKompass = 0;
68
volatile uint16_t BeepTime = 0;
69
volatile uint16_t BeepModulation = 0xFFFF;
70
 
71
#ifdef USE_NAVICTRL
72
volatile uint8_t SendSPI = 0;
73
#endif
74
 
75
 
76
 
77
/*****************************************************/
78
/*              Initialize Timer 0                   */
79
/*****************************************************/
80
// timer 0 is used for the PWM generation to control the offset voltage at the air pressure sensor
81
// Its overflow interrupt routine is used to generate the beep signal and the flight control motor update rate
82
void TIMER0_Init(void)
83
{
84
        uint8_t sreg = SREG;
85
 
86
        // disable all interrupts before reconfiguration
87
        cli();
88
 
89
        // configure speaker port as output
90
        if(BoardRelease == 10)
91
        {       // Speaker at PD2
92
                DDRD |= (1<<DDD2);
93
                PORTD &= ~(1<<PORTD2);
94
        }
95
        else
96
        {       // Speaker at PC7
97
                DDRC |= (1<<DDC7);
98
                PORTC &= ~(1<<PORTC7);
99
        }
100
 
101
        // set PB3 and PB4 as output for the PWM used as offset for the pressure sensor
102
        DDRB |= (1<<DDB4)|(1<<DDB3);
103
        PORTB &= ~((1<<PORTB4)|(1<<PORTB3));
104
 
105
        // Timer/Counter 0 Control Register A
106
 
107
        // Waveform Generation Mode is Fast PWM (Bits WGM02 = 0, WGM01 = 1, WGM00 = 1)
108
        // Clear OC0A on Compare Match, set OC0A at BOTTOM, noninverting PWM (Bits COM0A1 = 1, COM0A0 = 0)
109
        // Clear OC0B on Compare Match, set OC0B at BOTTOM, (Bits COM0B1 = 1, COM0B0 = 0)
110
        TCCR0A &= ~((1<<COM0A0)|(1<<COM0B0));
111
        TCCR0A |= (1<<COM0A1)|(1<<COM0B1)|(1<<WGM01)|(1<<WGM00);
112
 
113
        // Timer/Counter 0 Control Register B
114
 
115
        // set clock divider for timer 0 to SYSKLOCK/8 = 20MHz / 8 = 2.5MHz
116
        // i.e. the timer increments from 0x00 to 0xFF with an update rate of 2.5 MHz
117
        // hence the timer overflow interrupt frequency is 2.5 MHz / 256 = 9.765 kHz
118
 
119
        // divider 8 (Bits CS02 = 0, CS01 = 1, CS00 = 0)
120
        TCCR0B &= ~((1<<FOC0A)|(1<<FOC0B)|(1<<WGM02));
121
        TCCR0B = (TCCR0B & 0xF8)|(0<<CS02)|(1<<CS01)|(0<<CS00);
122
 
123
        // initialize the Output Compare Register A & B used for PWM generation on port PB3 & PB4
124
        OCR0A =  0;  // for PB3
125
        OCR0B = 120; // for PB4
126
 
127
        // init Timer/Counter 0 Register
128
        TCNT0 = 0;
129
 
130
        // Timer/Counter 0 Interrupt Mask Register
131
        // enable timer overflow interrupt only
132
        TIMSK0 &= ~((1<<OCIE0B)|(1<<OCIE0A));
133
        TIMSK0 |= (1<<TOIE0);
134
 
135
        SREG = sreg;
136
}
137
 
138
 
139
 
140
/*****************************************************/
141
/*          Interrupt Routine of Timer 0             */
142
/*****************************************************/
143
ISR(TIMER0_OVF_vect)    // 9.765 kHz
144
{
145
        static uint8_t cnt_1ms = 1,cnt = 0;
146
        uint8_t Beeper_On = 0;
147
 
148
#ifdef USE_NAVICTRL
149
        if(SendSPI) SendSPI--; // if SendSPI is 0, the transmit of a byte via SPI bus to and from The Navicontrol is done
150
#endif
151
 
152
        if(!cnt--) // every 10th run (9.765kHz/10 = 976Hz)
153
        {
154
                cnt = 9;
155
                cnt_1ms++;
156
                cnt_1ms %= 2;
157
                if(!cnt_1ms) UpdateMotor = 1; // every 2nd run (976Hz/2 = 488 Hz)
158
                CountMilliseconds++; // increment millisecond counter
159
        }
160
 
161
 
162
        // beeper on if duration is not over
163
        if(BeepTime)
164
        {
165
                BeepTime--; // decrement BeepTime
166
                if(BeepTime & BeepModulation) Beeper_On = 1;
167
                else Beeper_On = 0;
168
        }
169
        else // beeper off if duration is over
170
        {
171
                Beeper_On = 0;
172
                BeepModulation = 0xFFFF;
173
        }
174
 
175
        // if beeper is on
176
        if(Beeper_On)
177
        {
178
                // set speaker port to high
179
                if(BoardRelease == 10) PORTD |= (1<<PORTD2); // Speaker at PD2
180
                else                   PORTC |= (1<<PORTC7); // Speaker at PC7
181
        }
182
        else // beeper is off
183
        {
184
                // set speaker port to low
185
                if(BoardRelease == 10) PORTD &= ~(1<<PORTD2);// Speaker at PD2
186
                else                   PORTC &= ~(1<<PORTC7);// Speaker at PC7
187
        }
188
 
189
        #ifndef USE_NAVICTRL
190
        // update compass value if this option is enabled in the settings
191
        if(ParamSet.GlobalConfig & (CFG_COMPASS_ACTIVE|CFG_GPS_ACTIVE))
192
        {
193
        #ifdef USE_KILLAGREG
194
                MM3_Update(); // read out mm3 board
195
        #endif
196
        #ifdef USE_MK3MAG
197
                MK3MAG_Update(); // read out mk3mag pwm
198
        #endif
199
        }
200
        #endif
201
}
202
 
203
 
204
 
205
// -----------------------------------------------------------------------
206
uint16_t SetDelay (uint16_t t)
207
{
208
        return(CountMilliseconds + t - 1);
209
}
210
 
211
// -----------------------------------------------------------------------
212
int8_t CheckDelay(uint16_t t)
213
{
214
        return(((t - CountMilliseconds) & 0x8000) >> 8); // check sign bit
215
}
216
 
217
// -----------------------------------------------------------------------
218
void Delay_ms(uint16_t w)
219
{
220
        uint16_t t_stop;
221
        t_stop = SetDelay(w);
222
        while (!CheckDelay(t_stop));
223
}
224
 
225
// -----------------------------------------------------------------------
226
void Delay_ms_Mess(uint16_t w)
227
{
228
        uint16_t t_stop;
229
        t_stop = SetDelay(w);
230
        while (!CheckDelay(t_stop))
231
        {
232
                if(ADReady)
233
                {
234
                        ADReady = 0;
235
                        ADC_Enable();
236
                }
237
        }
238
}
239