Rev 935 | Go to most recent revision | Details | Compare with Previous | Last modification | View Log | RSS feed
| Rev | Author | Line No. | Line |
|---|---|---|---|
| 395 | hbuss | 1 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
| 886 | killagreg | 2 | // + Konstanten |
| 395 | hbuss | 3 | // + 0-250 -> normale Werte |
| 4 | // + 251 -> Poti1 |
||
| 5 | // + 252 -> Poti2 |
||
| 6 | // + 253 -> Poti3 |
||
| 7 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
| 886 | killagreg | 8 | |
| 9 | #ifndef EEMEM |
||
| 10 | #define EEMEM __attribute__ ((section (".eeprom"))) |
||
| 11 | #endif |
||
| 12 | |||
| 13 | |||
| 14 | #include <avr/eeprom.h> |
||
| 15 | #include <string.h> |
||
| 16 | #include "eeprom.h" |
||
| 17 | #include "printf_P.h" |
||
| 936 | killagreg | 18 | #include "led.h" |
| 886 | killagreg | 19 | |
| 20 | |||
| 21 | // byte array in eeprom |
||
| 22 | uint8_t EEPromArray[E2END+1] EEMEM; |
||
| 23 | |||
| 24 | paramset_t ParamSet; |
||
| 25 | |||
| 26 | |||
| 27 | |||
| 28 | /***************************************************/ |
||
| 29 | /* Default Values for parameter set 1 */ |
||
| 30 | /***************************************************/ |
||
| 31 | void ParamSet_DefaultSet1(void) // sport |
||
| 395 | hbuss | 32 | { |
| 911 | killagreg | 33 | ParamSet.ChannelAssignment[CH_NICK] = 1; |
| 886 | killagreg | 34 | ParamSet.ChannelAssignment[CH_ROLL] = 2; |
| 911 | killagreg | 35 | ParamSet.ChannelAssignment[CH_GAS] = 3; |
| 886 | killagreg | 36 | ParamSet.ChannelAssignment[CH_YAW] = 4; |
| 37 | ParamSet.ChannelAssignment[CH_POTI1] = 5; |
||
| 38 | ParamSet.ChannelAssignment[CH_POTI2] = 6; |
||
| 39 | ParamSet.ChannelAssignment[CH_POTI3] = 7; |
||
| 40 | ParamSet.ChannelAssignment[CH_POTI4] = 8; |
||
| 936 | killagreg | 41 | ParamSet.GlobalConfig = CFG_AXIS_COUPLING_ACTIVE | CFG_COMPASS_ACTIVE | CFG_GPS_ACTIVE;//CFG_HEIGHT_CONTROL | CFG_HEIGHT_SWITCH | CFG_COMPASS_FIX; |
| 911 | killagreg | 42 | ParamSet.Height_MinGas = 30; |
| 886 | killagreg | 43 | ParamSet.MaxHeight = 251; // Wert : 0-250 251 -> Poti1 |
| 44 | ParamSet.Height_P = 10; // Wert : 0-32 |
||
| 45 | ParamSet.Height_D = 30; // Wert : 0-250 |
||
| 46 | ParamSet.Height_ACC_Effect = 30; // Wert : 0-250 |
||
| 47 | ParamSet.Height_Gain = 4; // Wert : 0-50 |
||
| 48 | ParamSet.Stick_P = 15; // Wert : 1-24 |
||
| 49 | ParamSet.Stick_D = 30; // Wert : 0-250 |
||
| 50 | ParamSet.Yaw_P = 12; // Wert : 1-20 |
||
| 911 | killagreg | 51 | ParamSet.Gas_Min = 8; // Wert : 0-32 |
| 52 | ParamSet.Gas_Max = 230; // Wert : 33-250 |
||
| 886 | killagreg | 53 | ParamSet.GyroAccFactor = 30; // Wert : 1-64 |
| 54 | ParamSet.CompassYawEffect = 128; // Wert : 0-250 |
||
| 55 | ParamSet.Gyro_P = 80; // Wert : 0-250 |
||
| 56 | ParamSet.Gyro_I = 150; // Wert : 0-250 |
||
| 57 | ParamSet.LowVoltageWarning = 94; // Wert : 0-250 |
||
| 911 | killagreg | 58 | ParamSet.EmergencyGas = 35; // Wert : 0-250 // Gaswert bei Empangsverlust |
| 59 | ParamSet.EmergencyGasDuration = 30; // Wert : 0-250 // Zeit bis auf EmergencyGas geschaltet wird, wg. Rx-Problemen |
||
| 886 | killagreg | 60 | ParamSet.UfoArrangement = 0; // X oder + Formation |
| 61 | ParamSet.I_Factor = 32; |
||
| 936 | killagreg | 62 | ParamSet.UserParam1 = 0; //zur freien Verwendung |
| 63 | ParamSet.UserParam2 = 0; //zur freien Verwendung |
||
| 64 | ParamSet.UserParam3 = 0; //zur freien Verwendung |
||
| 65 | ParamSet.UserParam4 = 0; //zur freien Verwendung |
||
| 66 | ParamSet.UserParam5 = 0; // zur freien Verwendung |
||
| 67 | ParamSet.UserParam6 = 0; // zur freien Verwendung |
||
| 886 | killagreg | 68 | ParamSet.UserParam7 = 0; // zur freien Verwendung |
| 69 | ParamSet.UserParam8 = 0; // zur freien Verwendung |
||
| 911 | killagreg | 70 | ParamSet.ServoNickControl = 100; // Wert : 0-250 // Stellung des Servos |
| 71 | ParamSet.ServoNickComp = 40; // Wert : 0-250 // Einfluss Gyro/Servo |
||
| 72 | ParamSet.ServoNickCompInvert = 0; // Wert : 0-250 // Richtung Einfluss Gyro/Servo |
||
| 73 | ParamSet.ServoNickMin = 50; // Wert : 0-250 // Anschlag |
||
| 74 | ParamSet.ServoNickMax = 150; // Wert : 0-250 // Anschlag |
||
| 75 | ParamSet.ServoNickRefresh = 5; |
||
| 76 | ParamSet.LoopGasLimit = 50; |
||
| 886 | killagreg | 77 | ParamSet.LoopThreshold = 90; // Wert: 0-250 Schwelle für Stickausschlag |
| 78 | ParamSet.LoopHysteresis = 50; |
||
| 79 | ParamSet.LoopConfig = 0; // Bitcodiert: 0x01=oben, 0x02=unten, 0x04=links, 0x08=rechts / wird getrennt behandelt |
||
| 80 | ParamSet.Yaw_PosFeedback = 90; |
||
| 81 | ParamSet.Yaw_NegFeedback = 5; |
||
| 936 | killagreg | 82 | ParamSet.AngleTurnOverNick = 85; |
| 83 | ParamSet.AngleTurnOverRoll = 85; |
||
| 886 | killagreg | 84 | ParamSet.GyroAccTrim = 16; // 1/k |
| 85 | ParamSet.DriftComp = 4; |
||
| 86 | ParamSet.DynamicStability = 100; |
||
| 936 | killagreg | 87 | ParamSet.J16Bitmask = 95; |
| 88 | ParamSet.J17Bitmask = 243; |
||
| 89 | ParamSet.J16Timing = 15; |
||
| 90 | ParamSet.J17Timing = 15; |
||
| 91 | ParamSet.NaviGpsModeControl = 253; |
||
| 92 | ParamSet.NaviGpsGain = 100; |
||
| 93 | ParamSet.NaviGpsP = 90; |
||
| 94 | ParamSet.NaviGpsI = 90; |
||
| 95 | ParamSet.NaviGpsD = 90; |
||
| 96 | ParamSet.NaviGpsACC = 0; |
||
| 97 | ParamSet.NaviGpsMinSat = 6; |
||
| 98 | ParamSet.NaviStickThreshold = 8; |
||
| 886 | killagreg | 99 | memcpy(ParamSet.Name, "Sport\0",6); |
| 395 | hbuss | 100 | } |
| 886 | killagreg | 101 | |
| 102 | |||
| 103 | /***************************************************/ |
||
| 104 | /* Default Values for parameter set 2 */ |
||
| 105 | /***************************************************/ |
||
| 106 | void ParamSet_DefaultSet2(void) // normal |
||
| 395 | hbuss | 107 | { |
| 911 | killagreg | 108 | ParamSet.ChannelAssignment[CH_NICK] = 1; |
| 886 | killagreg | 109 | ParamSet.ChannelAssignment[CH_ROLL] = 2; |
| 911 | killagreg | 110 | ParamSet.ChannelAssignment[CH_GAS] = 3; |
| 886 | killagreg | 111 | ParamSet.ChannelAssignment[CH_YAW] = 4; |
| 112 | ParamSet.ChannelAssignment[CH_POTI1] = 5; |
||
| 113 | ParamSet.ChannelAssignment[CH_POTI2] = 6; |
||
| 114 | ParamSet.ChannelAssignment[CH_POTI3] = 7; |
||
| 115 | ParamSet.ChannelAssignment[CH_POTI4] = 8; |
||
| 936 | killagreg | 116 | ParamSet.GlobalConfig = CFG_AXIS_COUPLING_ACTIVE | CFG_COMPASS_ACTIVE | CFG_GPS_ACTIVE;//CFG_HEIGHT_CONTROL | CFG_HEIGHT_SWITCH | CFG_COMPASS_FIX; |
| 911 | killagreg | 117 | ParamSet.Height_MinGas = 30; |
| 886 | killagreg | 118 | ParamSet.MaxHeight = 251; // Wert : 0-250 251 -> Poti1 |
| 119 | ParamSet.Height_P = 10; // Wert : 0-32 |
||
| 120 | ParamSet.Height_D = 30; // Wert : 0-250 |
||
| 121 | ParamSet.Height_ACC_Effect = 30; // Wert : 0-250 |
||
| 122 | ParamSet.Height_Gain = 3; // Wert : 0-50 |
||
| 123 | ParamSet.Stick_P = 12; // Wert : 1-24 |
||
| 124 | ParamSet.Stick_D = 16; // Wert : 0-250 |
||
| 125 | ParamSet.Yaw_P = 6; // Wert : 1-20 |
||
| 911 | killagreg | 126 | ParamSet.Gas_Min = 8; // Wert : 0-32 |
| 127 | ParamSet.Gas_Max = 230; // Wert : 33-250 |
||
| 886 | killagreg | 128 | ParamSet.GyroAccFactor = 30; // Wert : 1-64 |
| 129 | ParamSet.CompassYawEffect = 128; // Wert : 0-250 |
||
| 130 | ParamSet.Gyro_P = 80; // Wert : 0-250 |
||
| 131 | ParamSet.Gyro_I = 120; // Wert : 0-250 |
||
| 132 | ParamSet.LowVoltageWarning = 94; // Wert : 0-250 |
||
| 911 | killagreg | 133 | ParamSet.EmergencyGas = 35; // Wert : 0-250 // Gaswert bei Empangsverlust |
| 134 | ParamSet.EmergencyGasDuration = 30; // Wert : 0-250 // Zeit bis auf EmergencyGas geschaltet wird, wg. Rx-Problemen |
||
| 886 | killagreg | 135 | ParamSet.UfoArrangement = 0; // X oder + Formation |
| 136 | ParamSet.I_Factor = 32; |
||
| 936 | killagreg | 137 | ParamSet.UserParam1 = 0; // zur freien Verwendung |
| 138 | ParamSet.UserParam2 = 0; // zur freien Verwendung |
||
| 139 | ParamSet.UserParam3 = 0; // zur freien Verwendung |
||
| 140 | ParamSet.UserParam4 = 0; // zur freien Verwendung |
||
| 141 | ParamSet.UserParam5 = 0; // zur freien Verwendung |
||
| 142 | ParamSet.UserParam6 = 0; // zur freien Verwendung |
||
| 886 | killagreg | 143 | ParamSet.UserParam7 = 0; // zur freien Verwendung |
| 144 | ParamSet.UserParam8 = 0; // zur freien Verwendung |
||
| 911 | killagreg | 145 | ParamSet.ServoNickControl = 100; // Wert : 0-250 // Stellung des Servos |
| 146 | ParamSet.ServoNickComp = 40; // Wert : 0-250 // Einfluss Gyro/Servo |
||
| 147 | ParamSet.ServoNickCompInvert = 0; // Wert : 0-250 // Richtung Einfluss Gyro/Servo |
||
| 148 | ParamSet.ServoNickMin = 50; // Wert : 0-250 // Anschlag |
||
| 149 | ParamSet.ServoNickMax = 150; // Wert : 0-250 // Anschlag |
||
| 150 | ParamSet.ServoNickRefresh = 5; |
||
| 151 | ParamSet.LoopGasLimit = 50; |
||
| 886 | killagreg | 152 | ParamSet.LoopThreshold = 90; // Wert: 0-250 Schwelle für Stickausschlag |
| 153 | ParamSet.LoopHysteresis = 50; |
||
| 154 | ParamSet.LoopConfig = 0; // Bitcodiert: 0x01=oben, 0x02=unten, 0x04=links, 0x08=rechts |
||
| 911 | killagreg | 155 | ParamSet.Yaw_PosFeedback = 90; // Faktor, mit dem Yaw die Achsen Roll und Nick verkoppelt |
| 886 | killagreg | 156 | ParamSet.Yaw_NegFeedback = 5; |
| 936 | killagreg | 157 | ParamSet.AngleTurnOverNick = 85; |
| 158 | ParamSet.AngleTurnOverRoll = 85; |
||
| 886 | killagreg | 159 | ParamSet.GyroAccTrim = 32; // 1/k |
| 160 | ParamSet.DriftComp = 4; |
||
| 161 | ParamSet.DynamicStability = 75; |
||
| 936 | killagreg | 162 | ParamSet.J16Bitmask = 95; |
| 163 | ParamSet.J17Bitmask = 243; |
||
| 164 | ParamSet.J16Timing = 20; |
||
| 165 | ParamSet.J17Timing = 20; |
||
| 166 | ParamSet.NaviGpsModeControl = 253; |
||
| 167 | ParamSet.NaviGpsGain = 100; |
||
| 168 | ParamSet.NaviGpsP = 90; |
||
| 169 | ParamSet.NaviGpsI = 90; |
||
| 170 | ParamSet.NaviGpsD = 90; |
||
| 171 | ParamSet.NaviGpsACC = 0; |
||
| 172 | ParamSet.NaviGpsMinSat = 6; |
||
| 173 | ParamSet.NaviStickThreshold = 8; |
||
| 886 | killagreg | 174 | memcpy(ParamSet.Name, "Normal\0", 7); |
| 395 | hbuss | 175 | } |
| 176 | |||
| 886 | killagreg | 177 | |
| 178 | /***************************************************/ |
||
| 179 | /* Default Values for parameter set 3 */ |
||
| 180 | /***************************************************/ |
||
| 181 | void ParamSet_DefaultSet3(void) // beginner |
||
| 395 | hbuss | 182 | { |
| 911 | killagreg | 183 | ParamSet.ChannelAssignment[CH_NICK] = 1; |
| 886 | killagreg | 184 | ParamSet.ChannelAssignment[CH_ROLL] = 2; |
| 911 | killagreg | 185 | ParamSet.ChannelAssignment[CH_GAS] = 3; |
| 886 | killagreg | 186 | ParamSet.ChannelAssignment[CH_YAW] = 4; |
| 187 | ParamSet.ChannelAssignment[CH_POTI1] = 5; |
||
| 188 | ParamSet.ChannelAssignment[CH_POTI2] = 6; |
||
| 189 | ParamSet.ChannelAssignment[CH_POTI3] = 7; |
||
| 190 | ParamSet.ChannelAssignment[CH_POTI4] = 8; |
||
| 936 | killagreg | 191 | ParamSet.GlobalConfig = CFG_ROTARY_RATE_LIMITER | CFG_AXIS_COUPLING_ACTIVE | CFG_COMPASS_ACTIVE | CFG_GPS_ACTIVE;//CFG_HEIGHT_CONTROL | CFG_HEIGHT_SWITCH | CFG_COMPASS_FIX; |
| 911 | killagreg | 192 | ParamSet.Height_MinGas = 30; |
| 886 | killagreg | 193 | ParamSet.MaxHeight = 251; // Wert : 0-250 251 -> Poti1 |
| 194 | ParamSet.Height_P = 10; // Wert : 0-32 |
||
| 195 | ParamSet.Height_D = 30; // Wert : 0-250 |
||
| 196 | ParamSet.Height_ACC_Effect = 30; // Wert : 0-250 |
||
| 197 | ParamSet.Height_Gain = 3; // Wert : 0-50 |
||
| 198 | ParamSet.Stick_P = 8; // Wert : 1-24 |
||
| 199 | ParamSet.Stick_D = 16; // Wert : 0-250 |
||
| 200 | ParamSet.Yaw_P = 6; // Wert : 1-20 |
||
| 911 | killagreg | 201 | ParamSet.Gas_Min = 8; // Wert : 0-32 |
| 202 | ParamSet.Gas_Max = 230; // Wert : 33-250 |
||
| 886 | killagreg | 203 | ParamSet.GyroAccFactor = 30; // Wert : 1-64 |
| 204 | ParamSet.CompassYawEffect = 128; // Wert : 0-250 |
||
| 205 | ParamSet.Gyro_P = 100; // Wert : 0-250 |
||
| 206 | ParamSet.Gyro_I = 120; // Wert : 0-250 |
||
| 207 | ParamSet.LowVoltageWarning = 94; // Wert : 0-250 |
||
| 911 | killagreg | 208 | ParamSet.EmergencyGas = 35; // Wert : 0-250 // Gaswert bei Empangsverlust |
| 209 | ParamSet.EmergencyGasDuration = 20; // Wert : 0-250 // Zeit bis auf EmergencyGas geschaltet wird, wg. Rx-Problemen |
||
| 886 | killagreg | 210 | ParamSet.UfoArrangement = 0; // X oder + Formation |
| 211 | ParamSet.I_Factor = 16; |
||
| 936 | killagreg | 212 | ParamSet.UserParam1 = 0; // zur freien Verwendung |
| 213 | ParamSet.UserParam2 = 0; // zur freien Verwendung |
||
| 214 | ParamSet.UserParam3 = 0; // zur freien Verwendung |
||
| 215 | ParamSet.UserParam4 = 0; // zur freien Verwendung |
||
| 216 | ParamSet.UserParam5 = 0; // zur freien Verwendung |
||
| 217 | ParamSet.UserParam6 = 0; // zur freien Verwendung |
||
| 886 | killagreg | 218 | ParamSet.UserParam7 = 0; // zur freien Verwendung |
| 219 | ParamSet.UserParam8 = 0; // zur freien Verwendung |
||
| 911 | killagreg | 220 | ParamSet.ServoNickControl = 100; // Wert : 0-250 // Stellung des Servos |
| 221 | ParamSet.ServoNickComp = 40; // Wert : 0-250 // Einfluss Gyro/Servo |
||
| 222 | ParamSet.ServoNickCompInvert = 0; // Wert : 0-250 // Richtung Einfluss Gyro/Servo |
||
| 223 | ParamSet.ServoNickMin = 50; // Wert : 0-250 // Anschlag |
||
| 224 | ParamSet.ServoNickMax = 150; // Wert : 0-250 // Anschlag |
||
| 225 | ParamSet.ServoNickRefresh = 5; |
||
| 226 | ParamSet.LoopGasLimit = 50; |
||
| 886 | killagreg | 227 | ParamSet.LoopThreshold = 90; // Wert: 0-250 Schwelle für Stickausschlag |
| 228 | ParamSet.LoopHysteresis = 50; |
||
| 229 | ParamSet.LoopConfig = 0; // Bitcodiert: 0x01=oben, 0x02=unten, 0x04=links, 0x08=rechts |
||
| 911 | killagreg | 230 | ParamSet.Yaw_PosFeedback = 90; // Faktor, mit dem Yaw die Achsen Roll und Nick verkoppelt |
| 886 | killagreg | 231 | ParamSet.Yaw_NegFeedback = 5; |
| 936 | killagreg | 232 | ParamSet.AngleTurnOverNick = 85; |
| 233 | ParamSet.AngleTurnOverRoll = 85; |
||
| 886 | killagreg | 234 | ParamSet.GyroAccTrim = 32; // 1/k |
| 235 | ParamSet.DriftComp = 4; |
||
| 236 | ParamSet.DynamicStability = 50; |
||
| 936 | killagreg | 237 | ParamSet.J16Bitmask = 95; |
| 238 | ParamSet.J17Bitmask = 243; |
||
| 239 | ParamSet.J16Timing = 30; |
||
| 240 | ParamSet.J17Timing = 30; |
||
| 241 | ParamSet.NaviGpsModeControl = 253; |
||
| 242 | ParamSet.NaviGpsGain = 100; |
||
| 243 | ParamSet.NaviGpsP = 90; |
||
| 244 | ParamSet.NaviGpsI = 90; |
||
| 245 | ParamSet.NaviGpsD = 90; |
||
| 246 | ParamSet.NaviGpsACC = 0; |
||
| 247 | ParamSet.NaviGpsMinSat = 6; |
||
| 248 | ParamSet.NaviStickThreshold = 8; |
||
| 886 | killagreg | 249 | memcpy(ParamSet.Name, "Beginner\0", 9); |
| 395 | hbuss | 250 | } |
| 886 | killagreg | 251 | |
| 252 | /***************************************************/ |
||
| 253 | /* Read Parameter from EEPROM as byte */ |
||
| 254 | /***************************************************/ |
||
| 255 | uint8_t GetParamByte(uint8_t param_id) |
||
| 256 | { |
||
| 257 | return eeprom_read_byte(&EEPromArray[EEPROM_ADR_PARAM_BEGIN + param_id]); |
||
| 258 | } |
||
| 259 | |||
| 260 | /***************************************************/ |
||
| 261 | /* Write Parameter to EEPROM as byte */ |
||
| 262 | /***************************************************/ |
||
| 263 | void SetParamByte(uint8_t param_id, uint8_t value) |
||
| 264 | { |
||
| 265 | eeprom_write_byte(&EEPromArray[EEPROM_ADR_PARAM_BEGIN + param_id], value); |
||
| 266 | } |
||
| 267 | |||
| 268 | /***************************************************/ |
||
| 269 | /* Read Parameter from EEPROM as word */ |
||
| 270 | /***************************************************/ |
||
| 271 | uint16_t GetParamWord(uint8_t param_id) |
||
| 272 | { |
||
| 273 | return eeprom_read_word((uint16_t *) &EEPromArray[EEPROM_ADR_PARAM_BEGIN + param_id]); |
||
| 274 | } |
||
| 275 | |||
| 276 | /***************************************************/ |
||
| 277 | /* Write Parameter to EEPROM as word */ |
||
| 278 | /***************************************************/ |
||
| 279 | void SetParamWord(uint8_t param_id, uint16_t value) |
||
| 280 | { |
||
| 281 | eeprom_write_word((uint16_t *) &EEPromArray[EEPROM_ADR_PARAM_BEGIN + param_id], value); |
||
| 282 | } |
||
| 283 | |||
| 284 | |||
| 285 | /***************************************************/ |
||
| 286 | /* Read Parameter Set from EEPROM */ |
||
| 287 | /***************************************************/ |
||
| 288 | // number [0..5] |
||
| 289 | void ParamSet_ReadFromEEProm(uint8_t setnumber) |
||
| 290 | { |
||
| 291 | if (setnumber > 5) setnumber = 5; |
||
| 292 | eeprom_read_block((uint8_t *) &ParamSet.ChannelAssignment[0], &EEPromArray[EEPROM_ADR_PARAMSET_BEGIN + PARAMSET_STRUCT_LEN * setnumber], PARAMSET_STRUCT_LEN); |
||
| 936 | killagreg | 293 | LED_Init(); |
| 886 | killagreg | 294 | } |
| 295 | |||
| 296 | /***************************************************/ |
||
| 297 | /* Write Parameter Set to EEPROM */ |
||
| 298 | /***************************************************/ |
||
| 299 | // number [0..5] |
||
| 300 | void ParamSet_WriteToEEProm(uint8_t setnumber) |
||
| 301 | { |
||
| 302 | if(setnumber > 5) setnumber = 5; |
||
| 303 | eeprom_write_block((uint8_t *) &ParamSet.ChannelAssignment[0], &EEPromArray[EEPROM_ADR_PARAMSET_BEGIN + PARAMSET_STRUCT_LEN * setnumber], PARAMSET_STRUCT_LEN); |
||
| 304 | // set this parameter set to active set |
||
| 305 | eeprom_write_byte(&EEPromArray[PID_ACTIVE_SET], setnumber); |
||
| 936 | killagreg | 306 | LED_Init(); |
| 886 | killagreg | 307 | } |
| 308 | |||
| 309 | /***************************************************/ |
||
| 310 | /* Get active parameter set */ |
||
| 311 | /***************************************************/ |
||
| 312 | uint8_t GetActiveParamSet(void) |
||
| 313 | { |
||
| 314 | uint8_t setnumber; |
||
| 315 | setnumber = eeprom_read_byte(&EEPromArray[PID_ACTIVE_SET]); |
||
| 316 | if(setnumber > 5) |
||
| 317 | { |
||
| 318 | setnumber = 2; |
||
| 319 | eeprom_write_byte(&EEPromArray[PID_ACTIVE_SET], setnumber); |
||
| 320 | } |
||
| 321 | return(setnumber); |
||
| 322 | } |
||
| 323 | |||
| 324 | /***************************************************/ |
||
| 325 | /* Set active parameter set */ |
||
| 326 | /***************************************************/ |
||
| 327 | void SetActiveParamSet(uint8_t setnumber) |
||
| 328 | { |
||
| 329 | if(setnumber > 5) setnumber = 5; |
||
| 330 | eeprom_write_byte(&EEPromArray[PID_ACTIVE_SET], setnumber); |
||
| 331 | } |
||
| 332 | |||
| 333 | /***************************************************/ |
||
| 334 | /* Initialize EEPROM Parameter Sets */ |
||
| 335 | /***************************************************/ |
||
| 336 | void ParamSet_Init(void) |
||
| 337 | { |
||
| 338 | // version check |
||
| 339 | if(eeprom_read_byte(&EEPromArray[PID_VERSION]) != EEPARAM_VERSION) |
||
| 340 | { |
||
| 341 | // if version check faild |
||
| 342 | printf("\n\rInit. EEPROM: Generating Default-Parameter..."); |
||
| 343 | ParamSet_DefaultSet1(); // Fill ParamSet Structure to default parameter set 1 (Sport) |
||
| 344 | // fill all 5 parameter settings with set 1 except otherwise defined |
||
| 345 | for (unsigned char i=0;i<6;i++) |
||
| 346 | { |
||
| 347 | if(i==2) ParamSet_DefaultSet2(); // Kamera |
||
| 348 | if(i==3) ParamSet_DefaultSet3(); // Beginner |
||
| 349 | if(i>3) ParamSet_DefaultSet2(); // Kamera |
||
| 350 | ParamSet_WriteToEEProm(i); |
||
| 351 | } |
||
| 352 | // default-Setting is parameter set 3 |
||
| 353 | SetParamByte(PID_ACTIVE_SET, 3); |
||
| 354 | // update version info |
||
| 355 | SetParamByte(PID_VERSION, EEPARAM_VERSION); |
||
| 356 | } |
||
| 357 | // read active parameter set to ParamSet stucture |
||
| 358 | ParamSet_ReadFromEEProm(GetParamByte(PID_ACTIVE_SET)); |
||
| 359 | printf("\n\rUsing Parameter Set %d", GetParamByte(PID_ACTIVE_SET)); |
||
| 360 | } |