Details | Last modification | View Log | RSS feed
| Rev | Author | Line No. | Line |
|---|---|---|---|
| 687 | killagreg | 1 | #include <avr/io.h> |
| 2 | #include <avr/interrupt.h> |
||
| 3 | |||
| 4 | |||
| 684 | killagreg | 5 | #include "main.h" |
| 6 | #include "uart1.h" |
||
| 7 | #include "fifo.h" |
||
| 8 | #include "ubx.h" |
||
| 9 | |||
| 10 | |||
| 11 | |||
| 12 | // FIFO-objects and buffers for input and output |
||
| 13 | |||
| 14 | //#define BUFSIZE_IN 0x96 |
||
| 15 | //volatile uint8_t inbuf[BUFSIZE_IN]; |
||
| 16 | //fifo_t infifo; |
||
| 17 | |||
| 18 | #define BUFSIZE_OUT 0x96 |
||
| 19 | volatile uint8_t outbuf[BUFSIZE_OUT]; |
||
| 20 | fifo_t outfifo; |
||
| 21 | |||
| 22 | /****************************************************************/ |
||
| 23 | /* Initialization of the USART1 */ |
||
| 24 | /****************************************************************/ |
||
| 25 | void USART1_Init (void) |
||
| 26 | { |
||
| 27 | // USART1 Control and Status Register A, B, C and baud rate register |
||
| 28 | uint8_t sreg = SREG; |
||
| 29 | uint16_t ubrr = (uint16_t) ((uint32_t) SYSCLK/(8 * USART1_BAUD) - 1); |
||
| 30 | |||
| 31 | // disable all interrupts before reconfiguration |
||
| 32 | cli(); |
||
| 33 | |||
| 34 | // disable RX-Interrupt |
||
| 35 | UCSR1B &= ~(1 << RXCIE1); |
||
| 36 | // disable TX-Interrupt |
||
| 37 | UCSR1B &= ~(1 << TXCIE1); |
||
| 38 | // disable DRE-Interrupt |
||
| 39 | UCSR1B |= (1 << UDRIE1); |
||
| 40 | |||
| 41 | // disable receiver and transmitter (will flush the buffers) |
||
| 42 | UCSR1B &= ~((1 << TXEN1) | (1 << RXEN1)); |
||
| 43 | |||
| 44 | // set direction of RXD1 and TXD1 pins |
||
| 45 | // set RXD1 (PD2) as an input pin |
||
| 701 | killagreg | 46 | DDRD &= ~(1 << DDD2); |
| 684 | killagreg | 47 | PORTD |= (1 << PORTD2); |
| 701 | killagreg | 48 | |
| 684 | killagreg | 49 | // set TXD1 (PD3) as an output pin |
| 701 | killagreg | 50 | DDRD |= (1 << DDD3); |
| 684 | killagreg | 51 | PORTD |= (1 << PORTD3); |
| 52 | |||
| 53 | // USART0 Baud Rate Register |
||
| 54 | // set clock divider |
||
| 55 | UBRR1H = (uint8_t)(ubrr>>8); |
||
| 56 | UBRR1L = (uint8_t)ubrr; |
||
| 57 | |||
| 58 | // enable double speed operation |
||
| 59 | UCSR1A |= (1 << U2X1); |
||
| 60 | // enable receiver and transmitter |
||
| 61 | UCSR1B = (1 << TXEN1) | (1 << RXEN1); |
||
| 62 | // set asynchronous mode |
||
| 63 | UCSR1C &= ~(1 << UMSEL11); |
||
| 64 | UCSR1C &= ~(1 << UMSEL10); |
||
| 65 | // no parity |
||
| 66 | UCSR1C &= ~(1 << UPM11); |
||
| 67 | UCSR1C &= ~(1 << UPM10); |
||
| 68 | // 1 stop bit |
||
| 69 | UCSR1C &= ~(1 << USBS1); |
||
| 70 | // 8-bit |
||
| 71 | UCSR1B &= ~(1 << UCSZ12); |
||
| 72 | UCSR1C |= (1 << UCSZ11); |
||
| 73 | UCSR1C |= (1 << UCSZ10); |
||
| 74 | |||
| 75 | // flush receive buffer explicit |
||
| 76 | while ( UCSR1A & (1<<RXC1) ) UDR1; |
||
| 77 | |||
| 78 | // enable interrupts at the end |
||
| 79 | // enable RX-Interrupt |
||
| 80 | UCSR1B |= (1 << RXCIE1); |
||
| 81 | // enable TX-Interrupt |
||
| 82 | //UCSR1B |= (1 << TXCIE1); |
||
| 83 | // enable DRE interrupt |
||
| 84 | //UCSR1B |= (1 << UDRIE1); |
||
| 85 | |||
| 86 | |||
| 87 | // restore global interrupt flags |
||
| 88 | SREG = sreg; |
||
| 89 | |||
| 90 | // inint FIFO buffer |
||
| 91 | //fifo_init (&infifo, inbuf, BUFSIZE_IN); |
||
| 92 | fifo_init (&outfifo, outbuf, BUFSIZE_OUT); |
||
| 93 | } |
||
| 94 | |||
| 95 | int16_t USART1_putc (const uint8_t c) |
||
| 96 | { |
||
| 97 | int16_t ret = fifo_put (&outfifo, c); |
||
| 98 | // create an data register empty interrupt |
||
| 99 | UCSR1B |= (1 << UDRIE1); |
||
| 100 | |||
| 101 | return ret; |
||
| 102 | } |
||
| 103 | |||
| 104 | /*int16_t USART1_getc_nowait () |
||
| 105 | { |
||
| 106 | return fifo_get_nowait (&infifo); |
||
| 107 | } |
||
| 108 | |||
| 109 | |||
| 110 | uint8_t USART1_getc_wait () |
||
| 111 | { |
||
| 112 | return fifo_get_wait (&infifo); |
||
| 113 | } |
||
| 114 | */ |
||
| 115 | |||
| 116 | /****************************************************************/ |
||
| 117 | /* USART1 data register empty ISR */ |
||
| 118 | /****************************************************************/ |
||
| 119 | ISR(USART1_UDRE_vect) |
||
| 120 | { |
||
| 121 | // Move a character from the output buffer to the data register. |
||
| 122 | // When the character was processed the next interrupt is generated. |
||
| 123 | // If the output buffer is empty the DRE-interrupt is disabled. |
||
| 124 | if (outfifo.count > 0) |
||
| 125 | UDR1 = _inline_fifo_get (&outfifo); |
||
| 126 | else |
||
| 127 | UCSR1B &= ~(1 << UDRIE1); |
||
| 128 | } |
||
| 129 | |||
| 130 | /****************************************************************/ |
||
| 131 | /* USART1 transmitter ISR */ |
||
| 132 | /****************************************************************/ |
||
| 133 | ISR(USART1_TX_vect) |
||
| 134 | { |
||
| 135 | |||
| 136 | } |
||
| 137 | |||
| 138 | /****************************************************************/ |
||
| 139 | /* USART1 receiver ISR */ |
||
| 140 | /****************************************************************/ |
||
| 141 | ISR(USART1_RX_vect) |
||
| 142 | { |
||
| 143 | uint8_t c; |
||
| 144 | c = UDR0; // get data byte |
||
| 145 | ubx_parser(c); // and put it into the ubx protocol parser |
||
| 146 | } |