Subversion Repositories FlightCtrl

Rev

Rev 685 | Go to most recent revision | Details | Compare with Previous | Last modification | View Log | RSS feed

Rev Author Line No. Line
685 killagreg 1 
#include <avr/io.h>
2 
#include <avr/interrupt.h>
3 
#include "fc.h"
687 killagreg 4 
#include "eeprom.h"
684 killagreg 5 
 
685 killagreg 6 
volatile int16_t ServoValue = 0;
684 killagreg 7 
 
8 
 
9 
/*****************************************************/
10 
/*              Initialize Timer 2                   */
11 
/*****************************************************/
12 
// The timer 2 is used to generate the PWM at PD7 (J7)
685 killagreg 13 
// to control a camera servo for nick compensation.
684 killagreg 14 
void TIMER2_Init(void)
15 
{
16 
        uint8_t sreg = SREG;
17 
 
18 
        // disable all interrupts before reconfiguration
19 
        cli();
20 
 
21 
        // set PD7 as output for the PWM
22 
        DDRD  |=(1<<DDD7);
23 
        PORTB |= (1<<PORTD7);
24 
 
25 
 
26 
        // Timer/Counter 2 Control Register A
27 
 
685 killagreg 28 
        // Waveform Generation Mode is Fast PWM (Bits: WGM22 = 0, WGM21 = 1, WGM20 = 1)
29 
    // PD7: Clear OC2B on Compare Match, set OC2B at BOTTOM, noninverting PWM (Bits: COM2A1 = 1, COM2A0 = 0)
30 
    // PD6: Normal port operation, OC2B disconnected, (Bits: COM2B1 = 0, COM2B0 = 0)
684 killagreg 31 
        TCCR2A &= ~((1<<COM2B1)|(1<<COM2B0)|(1<<COM2A0));
32 
    TCCR2A |= (1<<COM2A1)|(1<<WGM21)|(1<<WGM20);
33 
 
34 
    // Timer/Counter 2 Control Register B
35 
 
685 killagreg 36 
        // Set clock divider for timer 2 to SYSKLOCK/8 = 20MHz / 8 = 2.5MHz.
37 
        // The timer increments from 0x00 to 0xFF with an update rate of 2.5 MHz,
684 killagreg 38 
        // hence the timer overflow interrupt frequency is 2.5 MHz / 256 = 9.765 kHz
39 
 
685 killagreg 40 
    // divider 8 (Bits: CS022 = 0, CS21 = 1, CS20 = 0)
684 killagreg 41 
        TCCR2B &= ~((1<<FOC2A)|(1<<FOC2B)|(1<<WGM22));
42 
    TCCR2B = (TCCR2B & 0xF8)|(0<<CS22)|(1<<CS21)|(0<<CS20);
43 
 
685 killagreg 44 
        // Initialize the Output Compare Register A used for PWM generation on port PD7.
684 killagreg 45 
        OCR2A = 10;
46 
 
685 killagreg 47 
        // Initialize the Timer/Counter 2 Register
684 killagreg 48 
    TCNT2 = 0;
49 
 
50 
        // Timer/Counter 2 Interrupt Mask Register
685 killagreg 51 
        // Enable timer output compare match A Interrupt only
684 killagreg 52 
        TIMSK2 &= ~((1<<OCIE2B)|(1<<TOIE2));
53 
        TIMSK2 |= (1<<OCIE2A);
54 
 
55 
    SREG = sreg;
56 
}
57 
 
58 
 
59 
/*****************************************************/
60 
/*              Control Servo Position               */
61 
/*****************************************************/
685 killagreg 62 
ISR(TIMER2_COMPA_vect)  // 9.765 kHz
684 killagreg 63 
{
64 
  static uint8_t timer = 10;
65 
 
66 
  if(!timer--)
67 
    {
68 
     // enable PWM on PD7 in non inverting mode
69 
     TCCR2A = (TCCR2A & 0x3F)|(1<<COM2A1)|(0<<COM2A0);
70 
 
71 
     ServoValue =  Parameter_ServoNickControl;
72 
     // inverting movment of servo
687 killagreg 73 
     if(ParamSet.ServoNickCompInvert & 0x01)
684 killagreg 74 
     {
687 killagreg 75 
                 ServoValue += ((int32_t) ParamSet.ServoNickComp * (IntegralNick / 128)) / 512;
684 killagreg 76 
         }
685 killagreg 77 
     else // non inverting movement of servo
684 killagreg 78 
     {
687 killagreg 79 
                 ServoValue -= ((int32_t) ParamSet.ServoNickComp * (IntegralNick / 128)) / 512;
684 killagreg 80 
         }
81 
 
82 
         // limit servo value to its parameter range definition
687 killagreg 83 
     if(ServoValue < ParamSet.ServoNickMin)
684 killagreg 84 
     {
687 killagreg 85 
                 ServoValue = ParamSet.ServoNickMin;
684 killagreg 86 
         }
687 killagreg 87 
     else if(ServoValue > ParamSet.ServoNickMax)
684 killagreg 88 
     {
687 killagreg 89 
                 ServoValue = ParamSet.ServoNickMax;
684 killagreg 90 
     }
91 
 
92 
         // update PWM
93 
     OCR2A = ServoValue;
687 killagreg 94 
     timer = ParamSet.ServoNickRefresh;
684 killagreg 95 
    }
96 
    else
97 
    {
98 
         // disable PWM at PD7
99 
     TCCR2A &= ~((1<<COM2A1)|(1<<COM2A0));
685 killagreg 100 
     // set PD7 to low
684 killagreg 101 
     PORTD &= ~(1<<PORTD7);
102 
    }
103 
}