Subversion Repositories FlightCtrl

Rev

Details | Last modification | View Log | RSS feed

Rev Author Line No. Line
1 ingob 1
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
2
// + Copyright (c) 04.2007 Holger Buss
3
// + Nur für den privaten Gebrauch
4
// + www.MikroKopter.com
5
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
683 killagreg 6
// + Es gilt für das gesamte Projekt (Hardware, Software, Binärfiles, Sourcecode und Dokumentation),
7
// + dass eine Nutzung (auch auszugsweise) nur für den privaten und nicht-kommerziellen Gebrauch zulässig ist.
8
// + Sollten direkte oder indirekte kommerzielle Absichten verfolgt werden, ist mit uns (info@mikrokopter.de) Kontakt
9
// + bzgl. der Nutzungsbedingungen aufzunehmen.
1 ingob 10
// + Eine kommerzielle Nutzung ist z.B.Verkauf von MikroKoptern, Bestückung und Verkauf von Platinen oder Bausätzen,
11
// + Verkauf von Luftbildaufnahmen, usw.
12
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
683 killagreg 13
// + Werden Teile des Quellcodes (mit oder ohne Modifikation) weiterverwendet oder veröffentlicht,
1 ingob 14
// + unterliegen sie auch diesen Nutzungsbedingungen und diese Nutzungsbedingungen incl. Copyright müssen dann beiliegen
15
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
16
// + Sollte die Software (auch auszugesweise) oder sonstige Informationen des MikroKopter-Projekts
17
// + auf anderen Webseiten oder Medien veröffentlicht werden, muss unsere Webseite "http://www.mikrokopter.de"
18
// + eindeutig als Ursprung verlinkt und genannt werden
19
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
20
// + Keine Gewähr auf Fehlerfreiheit, Vollständigkeit oder Funktion
21
// + Benutzung auf eigene Gefahr
22
// + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden
23
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
683 killagreg 24
// + Die Portierung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur
1 ingob 25
// + mit unserer Zustimmung zulässig
26
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
27
// + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen
28
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
683 killagreg 29
// + Redistributions of source code (with or without modifications) must retain the above copyright notice,
1 ingob 30
// + this list of conditions and the following disclaimer.
31
// +   * Neither the name of the copyright holders nor the names of contributors may be used to endorse or promote products derived
32
// +     from this software without specific prior written permission.
683 killagreg 33
// +   * The use of this project (hardware, software, binary files, sources and documentation) is only permittet
1 ingob 34
// +     for non-commercial use (directly or indirectly)
683 killagreg 35
// +     Commercial use (for excample: selling of MikroKopters, selling of PCBs, assembly, ...) is only permitted
1 ingob 36
// +     with our written permission
683 killagreg 37
// +   * If sources or documentations are redistributet on other webpages, out webpage (http://www.MikroKopter.de) must be
38
// +     clearly linked as origin
1 ingob 39
// +   * porting to systems other than hardware from www.mikrokopter.de is not allowed
40
// +  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
41
// +  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
42
// +  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
43
// +  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
44
// +  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
45
// +  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
46
// +  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
47
// +  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
48
// +  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
49
// +  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
683 killagreg 50
// +  POSSIBILITY OF SUCH DAMAGE.
1 ingob 51
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
687 killagreg 52
#include <avr/boot.h>
53
 
54
#include <avr/io.h>
55
#include <avr/interrupt.h>
56
 
1 ingob 57
#include "main.h"
685 killagreg 58
#include "timer0.h"
59
#include "timer2.h"
60
#include "uart.h"
61
#include "uart1.h"
62
#include "menu.h"
724 killagreg 63
#include "ubx.h"
685 killagreg 64
#include "fc.h"
65
#include "rc.h"
66
#include "analog.h"
67
#include "printf_P.h"
694 killagreg 68
//#include "spi.h"
754 killagreg 69
#ifdef USE_MM3
694 killagreg 70
#include "mm3.h"
754 killagreg 71
#endif
72
#ifdef USE_CMPS03
73
#include "cmps03.h"
74
#endif
685 killagreg 75
#include "twimaster.h"
76
#include "eeprom.h"
77
#include "_Settings.h"
1 ingob 78
 
79
 
687 killagreg 80
 
685 killagreg 81
uint8_t BoardRelease = 10;
82
 
1 ingob 83
 
84
//############################################################################
85
//Hauptprogramm
86
int main (void)
87
//############################################################################
88
{
89
        unsigned int timer;
296 holgerb 90
 
683 killagreg 91
        // disable interrupts global
92
        cli();
93
 
712 killagreg 94
        // get board release
683 killagreg 95
    DDRB  = 0x00;
96
    PORTB = 0x00;
732 killagreg 97
    for(timer = 0; timer < 1000; timer++); // make some delay
754 killagreg 98
    if(PINB & (1<<PINB1)) BoardRelease = 11;
685 killagreg 99
    else BoardRelease = 10;
100
 
732 killagreg 101
        // set LED ports as output
712 killagreg 102
        DDRB |= (1<<DDB1)|(1<<DDB0);
103
        ROT_ON;
104
        GRN_OFF;
683 killagreg 105
 
750 killagreg 106
        // set PC2 & PC3 as output (ctrl J16 & J17)
107
        DDRC |= (1<<DDC2)|(1<<DDC3);
108
        J16_OFF;
109
        J17_OFF;
110
 
111
    // disable watchdog
1 ingob 112
    MCUSR &=~(1<<WDRF);
113
    WDTCSR |= (1<<WDCE)|(1<<WDE);
114
    WDTCSR = 0;
115
 
683 killagreg 116
    BeepTime = 2000;
1 ingob 117
 
707 killagreg 118
        PPM_in[CH_THRUST] = 0;
701 killagreg 119
        StickYaw = 0;
683 killagreg 120
        StickRoll = 0;
701 killagreg 121
        StickPitch = 0;
1 ingob 122
 
123
    ROT_OFF;
683 killagreg 124
 
712 killagreg 125
        // initalize modules
683 killagreg 126
    TIMER0_Init();
127
    TIMER2_Init();
128
        USART0_Init();
754 killagreg 129
 
130
#if defined (__AVR_ATmega644p__)
131
        if (BoardRelease == 11) USART1_Init();
132
#endif
133
 
712 killagreg 134
    RC_Init();
1 ingob 135
        ADC_Init();
726 killagreg 136
        I2C_Init();
754 killagreg 137
 
138
#ifdef USE_MM3
726 killagreg 139
        MM3_Init();
754 killagreg 140
#endif
141
#ifdef USE_CMPS03
142
        CMPS03_Init();
143
#endif
683 killagreg 144
        //SPI_MasterInit();
145
 
146
        // enable interrupts global
1 ingob 147
        sei();
148
 
735 killagreg 149
    VersionInfo.Major = VERSION_MAJOR;
150
    VersionInfo.Minor = VERSION_MINOR;
151
    VersionInfo.PCCompatible = VERSION_COMPATIBLE;
683 killagreg 152
 
735 killagreg 153
        printf("\n\rFlightControl\n\rHardware:%d.%d\n\rSoftware:V%d.%d%c ",BoardRelease/10,BoardRelease%10, VERSION_MAJOR, VERSION_MINOR,VERSION_INDEX + 'a');
1 ingob 154
        printf("\n\r==============================");
155
        GRN_ON;
156
 
687 killagreg 157
        // Parameter set handling
158
        ParamSet_Init();
513 hbuss 159
 
731 killagreg 160
    if(GetParamWord(PID_ACC_PITCH) > 1023)
513 hbuss 161
     {
727 killagreg 162
       printf("\n\rACC not calibrated!");
513 hbuss 163
     }
683 killagreg 164
 
731 killagreg 165
        //wait for a short time (otherwise the RC channel check won't work below)
694 killagreg 166
        timer = SetDelay(500);
167
        while(!CheckDelay(timer));
1 ingob 168
 
754 killagreg 169
 
170
#ifdef USE_MM3
171
        printf("\n\rSupport for Compass Module MM3");
694 killagreg 172
        //Compass calibration?
707 killagreg 173
        if(PPM_in[ParamSet.ChannelAssignment[CH_THRUST]] > 100 && PPM_in[ParamSet.ChannelAssignment[CH_YAW]] > 100)
694 killagreg 174
        {
175
                printf("\n\rCalibrating Compass");
726 killagreg 176
                MM3_Calibrate();
694 killagreg 177
        }
754 killagreg 178
#endif
179
#ifdef USE_CMPS03
180
        printf("\n\rSupport for Compass Module CMPS03");
181
#endif
694 killagreg 182
 
183
 
690 killagreg 184
        if(ParamSet.GlobalConfig & CFG_HEIGHT_CONTROL)
683 killagreg 185
         {
727 killagreg 186
           printf("\n\rCalibrating air pressure sensor..");
683 killagreg 187
           timer = SetDelay(1000);
701 killagreg 188
       SearchAirPressureOffset();
1 ingob 189
           while (!CheckDelay(timer));
190
       printf("OK\n\r");
191
        }
683 killagreg 192
 
1 ingob 193
        SetNeutral();
194
 
195
        ROT_OFF;
196
 
683 killagreg 197
    BeepTime = 2000;
198
    ExternControl.Digital[0] = 0x55;
199
 
200
 
727 killagreg 201
        printf("\n\rControl: ");
687 killagreg 202
        if (ParamSet.GlobalConfig & CFG_HEADING_HOLD) printf("HeadingHold");
1 ingob 203
        else printf("Neutral");
683 killagreg 204
 
1 ingob 205
        printf("\n\n\r");
683 killagreg 206
 
685 killagreg 207
    LCD_Clear();
702 killagreg 208
 
173 holgerb 209
    I2CTimeout = 5000;
1 ingob 210
        while (1)
211
        {
712 killagreg 212
        if(UpdateMotor)      // control interval
683 killagreg 213
            {
694 killagreg 214
            //SPI_TransmitByte(); //#
712 killagreg 215
                        UpdateMotor=0; // reset Flag, is enabled every 2 ms by isr of timer0
419 hbuss 216
//PORTD |= 0x08;
712 killagreg 217
            MotorControl();
604 hbuss 218
 
419 hbuss 219
//PORTD &= ~0x08;
1 ingob 220
            SendMotorData();
221
            ROT_OFF;
706 killagreg 222
            if(PcAccess) PcAccess--;
712 killagreg 223
            else
492 hbuss 224
              {
683 killagreg 225
               DubWiseKeys[0] = 0;
492 hbuss 226
               DubWiseKeys[1] = 0;
595 hbuss 227
                           ExternControl.Config = 0;
701 killagreg 228
               ExternStickPitch= 0;
492 hbuss 229
               ExternStickRoll = 0;
701 killagreg 230
               ExternStickYaw = 0;
492 hbuss 231
              }
688 killagreg 232
              if(SenderOkay)  SenderOkay--;
233
              if(!I2CTimeout)
173 holgerb 234
                {
235
                 I2CTimeout = 5;
726 killagreg 236
                 I2C_Reset();
701 killagreg 237
                  if((BeepModulation == 0xFFFF) && MotorsOn)
683 killagreg 238
                   {
239
                    BeepTime = 10000; // 1 second
240
                    BeepModulation = 0x0080;
241
                   }
1 ingob 242
                }
683 killagreg 243
            else
1 ingob 244
                {
173 holgerb 245
                 I2CTimeout--;
683 killagreg 246
                 ROT_OFF;
1 ingob 247
                }
604 hbuss 248
            if(SIO_DEBUG && !UpdateMotor)
1 ingob 249
              {
735 killagreg 250
               TransmitTxData();
251
               ProcessRxData();
1 ingob 252
              }
735 killagreg 253
              else ProcessRxData();
173 holgerb 254
         if(CheckDelay(timer))
683 killagreg 255
            {
690 killagreg 256
            if(UBat < ParamSet.LowVoltageWarning)
683 killagreg 257
                {
258
                  if(BeepModulation == 0xFFFF)
259
                   {
260
                    BeepTime = 6000; // 0.6 seconds
261
                   }
173 holgerb 262
                }
694 killagreg 263
             //SPI_StartTransmitPacket();//#
683 killagreg 264
                         timer = SetDelay(100);
265
            }
604 hbuss 266
          }
1 ingob 267
    }
268
 return (1);
269
}
270