Subversion Repositories FlightCtrl

Rev

Rev 687 | Go to most recent revision | Details | Compare with Previous | Last modification | View Log | RSS feed

Rev Author Line No. Line
1 ingob 1
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
2
// + Copyright (c) 04.2007 Holger Buss
3
// + only for non-profit use
4
// + www.MikroKopter.com
5
// + see the File "License.txt" for further Informations
6
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
687 killagreg 7
#include <stdlib.h>
8
#include <avr/io.h>
9
#include <avr/interrupt.h>
10
 
685 killagreg 11
#include "analog.h"
1 ingob 12
#include "main.h"
685 killagreg 13
#include "timer0.h"
14
#include "fc.h"
15
#include "printf_P.h"
687 killagreg 16
#include "eeprom.h"
1 ingob 17
 
701 killagreg 18
volatile int16_t Current_Pitch = 0, Current_Roll = 0, Current_Yaw = 0;
683 killagreg 19
volatile int16_t Current_AccX = 0, Current_AccY = 0, Current_AccZ = 0;
20
volatile int16_t UBat = 100;
701 killagreg 21
volatile int16_t AdValueGyrPitch = 0, AdValueGyrRoll = 0, AdValueGyrYaw = 0;
22
volatile int16_t AdValueAccRoll = 0, AdValueAccPitch = 0, AdValueAccTop = 0;
683 killagreg 23
volatile uint8_t messanzahl_AccHoch = 0;
701 killagreg 24
volatile int32_t AirPressure = 32000;
25
volatile int16_t StartAirPressure;
26
volatile uint16_t ReadingAirPressure = 1023;
683 killagreg 27
uint8_t DruckOffsetSetting;
28
volatile int16_t HoeheD = 0;
701 killagreg 29
volatile int16_t tmpAirPressure;
683 killagreg 30
volatile uint16_t ZaehlMessungen = 0;
1 ingob 31
 
683 killagreg 32
/*****************************************************/
33
/*     Initialize Analog Digital Converter           */
34
/*****************************************************/
1 ingob 35
void ADC_Init(void)
683 killagreg 36
{
37
        uint8_t sreg = SREG;
38
        // disable all interrupts before reconfiguration
39
        cli();
40
        //ADC0 ... ADC7 is connected to PortA pin 0 ... 7
41
        DDRA = 0x00;
42
        PORTA = 0x00;
43
        // Digital Input Disable Register 0
44
        // Disable digital input buffer for analog adc_channel pins
45
        DIDR0 = 0xFF;
46
        // external reference, adjust data to the right
47
    ADMUX &= ~((1 << REFS1)|(1 << REFS0)|(1 << ADLAR));
48
    // set muxer to ADC adc_channel 0 (0 to 7 is a valid choice)
49
    ADMUX = (ADMUX & 0xE0) | 0x00;
50
    //Set ADC Control and Status Register A
51
    //Auto Trigger Enable, Prescaler Select Bits to Division Factor 128, i.e. ADC clock = SYSCKL/128 = 156.25 kHz
52
    ADCSRA = (1<<ADATE)|(1<<ADPS2)|(1<<ADPS1)|(1<<ADPS0);
53
        //Set ADC Control and Status Register B
54
        //Trigger Source to Free Running Mode
55
        ADCSRB &= ~((1 << ADTS2)|(1 << ADTS1)|(1 << ADTS0));
56
        // Enable AD conversion
57
        ADC_Enable();
58
    // restore global interrupt flags
59
    SREG = sreg;
1 ingob 60
}
61
 
701 killagreg 62
void SearchAirPressureOffset(void)
1 ingob 63
{
687 killagreg 64
 uint8_t off;
65
 off = GetParamByte(PID_LAST_OFFSET);
173 holgerb 66
 if(off > 20) off -= 10;
67
 OCR0A = off;
380 hbuss 68
 Delay_ms_Mess(100);
701 killagreg 69
 if(ReadingAirPressure < 850) off = 0;
173 holgerb 70
 for(; off < 250;off++)
1 ingob 71
  {
72
  OCR0A = off;
380 hbuss 73
  Delay_ms_Mess(50);
683 killagreg 74
  printf(".");
701 killagreg 75
  if(ReadingAirPressure < 900) break;
1 ingob 76
  }
687 killagreg 77
 SetParamByte(PID_LAST_OFFSET, off);
173 holgerb 78
 DruckOffsetSetting = off;
380 hbuss 79
 Delay_ms_Mess(300);
1 ingob 80
}
81
 
82
 
683 killagreg 83
/*****************************************************/
84
/*     Interrupt Service Routine for ADC             */
85
/*****************************************************/
86
ISR(ADC_vect)
1 ingob 87
{
683 killagreg 88
    static uint8_t adc_channel = 0, state = 0;
701 killagreg 89
    static uint16_t yaw1, roll1, pitch1;
683 killagreg 90
    static uint8_t messanzahl_Druck = 0;
91
    // disable further AD conversion
92
    ADC_Disable();
93
    // state machine
1 ingob 94
    switch(state++)
95
        {
96
        case 0:
701 killagreg 97
            yaw1 = ADC; // get Gyro Yaw Voltage 1st sample
683 killagreg 98
            adc_channel = 1; // set next channel to ADC1 = ROLL GYRO
99
            ZaehlMessungen++; // increment total measurement counter
1 ingob 100
            break;
101
        case 1:
683 killagreg 102
            roll1 = ADC; // get Gyro Roll Voltage 1st sample
701 killagreg 103
            adc_channel = 2; // set next channel to ADC2 = PITCH GYRO
1 ingob 104
            break;
105
        case 2:
701 killagreg 106
            pitch1 = ADC; // get Gyro Pitch Voltage 1st sample
683 killagreg 107
            adc_channel = 4; // set next channel to ADC4 = UBAT
1 ingob 108
            break;
109
        case 3:
683 killagreg 110
                // get actual UBat (Volts*10) is ADC*30V/1024*10 = ADC/3
111
            UBat = (3 * UBat + ADC / 3) / 4; // low pass filter updates UBat only to 1 quater with actual ADC value
112
            adc_channel = 6; // set next channel to ADC6 = ACC_Y
1 ingob 113
            break;
114
        case 4:
683 killagreg 115
            Current_AccY = NeutralAccY - ADC; // get acceleration in Y direction
116
            AdValueAccRoll = Current_AccY;
117
            adc_channel = 7; // set next channel to ADC7 = ACC_X
1 ingob 118
            break;
119
        case 5:
683 killagreg 120
            Current_AccX = ADC - NeutralAccX; // get acceleration in X direction
701 killagreg 121
            AdValueAccPitch =  Current_AccX;
122
                    adc_channel = 0; // set next channel to ADC7 = YAW GYRO
1 ingob 123
            break;
124
        case 6:
701 killagreg 125
                // average over two samples to create current AdValueGyrYaw
126
            if(BoardRelease == 10)  AdValueGyrYaw = (ADC + yaw1) / 2;
127
                        else                                       AdValueGyrYaw = ADC + yaw1; // gain is 2 times lower on FC 1.1
683 killagreg 128
            adc_channel = 1; // set next channel to ADC7 = ROLL GYRO
401 hbuss 129
            break;
130
        case 7:
701 killagreg 131
                // average over two samples to create current ADValueGyrRoll
685 killagreg 132
            if(BoardRelease == 10)  AdValueGyrRoll = (ADC + roll1) / 2;
683 killagreg 133
                        else                                       AdValueGyrRoll = ADC + roll1; // gain is 2 times lower on FC 1.1
701 killagreg 134
            adc_channel = 2; // set next channel to ADC2 = PITCH GYRO
401 hbuss 135
            break;
136
        case 8:
701 killagreg 137
                // average over two samples to create current ADValuePitch
138
            if(BoardRelease == 10)  AdValueGyrPitch = (ADC + pitch1) / 2;
139
                        else                                       AdValueGyrPitch = ADC + pitch1; // gain is 2 times lower on FC 1.1
683 killagreg 140
            adc_channel = 5; // set next channel to ADC5 = ACC_Z
401 hbuss 141
            break;
142
       case 9:
683 killagreg 143
                // get z acceleration
144
            AdValueAccTop =  (int16_t) ADC - NeutralAccZ; // get plain acceleration in Z direction
145
            AdValueAccTop += abs(Current_AccY) / 4 + abs(Current_AccX) / 4;
146
            if(AdValueAccTop > 1)
1 ingob 147
             {
683 killagreg 148
              if(NeutralAccZ < 800) NeutralAccZ+= 0.02;
149
             }
150
             else if(AdValueAccTop < -1)
1 ingob 151
             {
152
              if(NeutralAccZ > 600) NeutralAccZ-= 0.02;
683 killagreg 153
             }
1 ingob 154
            messanzahl_AccHoch = 1;
683 killagreg 155
            Current_AccZ = ADC;
701 killagreg 156
            Reading_Integral_Top += AdValueAccTop;      // Integrieren
157
            Reading_Integral_Top -= Reading_Integral_Top / 1024; // dämfen
683 killagreg 158
                adc_channel = 3; // set next channel to ADC3 = air pressure
1 ingob 159
            break;
401 hbuss 160
        case 10:
701 killagreg 161
            tmpAirPressure += ADC; // sum vadc values
683 killagreg 162
            if(++messanzahl_Druck >= 5) // if 5 values are summerized for averaging
1 ingob 163
                {
701 killagreg 164
                ReadingAirPressure = ADC; // update measured air pressure
683 killagreg 165
                messanzahl_Druck = 0; // reset air pressure measurement counter
701 killagreg 166
                                HoeheD = (int16_t)(StartAirPressure - tmpAirPressure - ReadingHight);  // D-Anteil = neuerWert - AlterWert
167
                AirPressure = (tmpAirPressure + 3 * AirPressure) / 4; // averaging using history
168
                ReadingHight = StartAirPressure - AirPressure;
169
                tmpAirPressure = 0;
683 killagreg 170
                }
171
            adc_channel = 0; // set next channel to ADC0 = GIER GYRO
172
            state = 0; // reset state
1 ingob 173
            break;
683 killagreg 174
        default:
175
            adc_channel = 0;
1 ingob 176
            state = 0;
177
            break;
683 killagreg 178
        }
179
    // set adc muxer to next adc_channel
180
    ADMUX = (ADMUX & 0xE0) | adc_channel;
181
    // ??
182
    if(state != 0) ADC_Enable();
1 ingob 183
}