Subversion Repositories FlightCtrl

Rev

Details | Last modification | View Log | RSS feed

Rev Author Line No. Line
1 ingob 1
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
2
// + Copyright (c) 04.2007 Holger Buss
3
// + only for non-profit use
4
// + www.MikroKopter.com
5
// + see the File "License.txt" for further Informations
6
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
687 killagreg 7
#include <stdlib.h>
8
#include <avr/io.h>
9
#include <avr/interrupt.h>
10
 
685 killagreg 11
#include "analog.h"
1 ingob 12
#include "main.h"
685 killagreg 13
#include "timer0.h"
14
#include "fc.h"
15
#include "printf_P.h"
687 killagreg 16
#include "eeprom.h"
1 ingob 17
 
750 killagreg 18
volatile int16_t Current_AccZ = 0;
683 killagreg 19
volatile int16_t UBat = 100;
750 killagreg 20
volatile int16_t AdValueGyrPitch = 0, AdValueGyrRoll = 0,  AdValueGyrYaw = 0;
21
volatile int16_t AdValueAccRoll = 0,  AdValueAccPitch = 0, AdValueAccTop = 0;
701 killagreg 22
volatile int32_t AirPressure = 32000;
23
volatile int16_t StartAirPressure;
24
volatile uint16_t ReadingAirPressure = 1023;
711 killagreg 25
uint8_t PressureSensorOffset;
703 killagreg 26
volatile int16_t HightD = 0;
711 killagreg 27
volatile uint16_t MeasurementCounter = 0;
1 ingob 28
 
683 killagreg 29
/*****************************************************/
30
/*     Initialize Analog Digital Converter           */
31
/*****************************************************/
1 ingob 32
void ADC_Init(void)
683 killagreg 33
{
34
        uint8_t sreg = SREG;
35
        // disable all interrupts before reconfiguration
36
        cli();
37
        //ADC0 ... ADC7 is connected to PortA pin 0 ... 7
38
        DDRA = 0x00;
39
        PORTA = 0x00;
40
        // Digital Input Disable Register 0
41
        // Disable digital input buffer for analog adc_channel pins
42
        DIDR0 = 0xFF;
43
        // external reference, adjust data to the right
44
    ADMUX &= ~((1 << REFS1)|(1 << REFS0)|(1 << ADLAR));
45
    // set muxer to ADC adc_channel 0 (0 to 7 is a valid choice)
46
    ADMUX = (ADMUX & 0xE0) | 0x00;
47
    //Set ADC Control and Status Register A
48
    //Auto Trigger Enable, Prescaler Select Bits to Division Factor 128, i.e. ADC clock = SYSCKL/128 = 156.25 kHz
49
    ADCSRA = (1<<ADATE)|(1<<ADPS2)|(1<<ADPS1)|(1<<ADPS0);
50
        //Set ADC Control and Status Register B
51
        //Trigger Source to Free Running Mode
52
        ADCSRB &= ~((1 << ADTS2)|(1 << ADTS1)|(1 << ADTS0));
53
        // Enable AD conversion
54
        ADC_Enable();
55
    // restore global interrupt flags
56
    SREG = sreg;
1 ingob 57
}
58
 
701 killagreg 59
void SearchAirPressureOffset(void)
1 ingob 60
{
750 killagreg 61
        uint8_t off;
62
        off = GetParamByte(PID_PRESSURE_OFFSET);
63
        if(off > 20) off -= 10;
64
        OCR0A = off;
65
        Delay_ms_Mess(100);
66
        if(ReadingAirPressure < 850) off = 0;
67
        for(; off < 250;off++)
68
        {
69
                OCR0A = off;
70
                Delay_ms_Mess(50);
71
                printf(".");
72
                if(ReadingAirPressure < 900) break;
73
        }
74
        SetParamByte(PID_PRESSURE_OFFSET, off);
75
        PressureSensorOffset = off;
76
        Delay_ms_Mess(300);
1 ingob 77
}
78
 
79
 
683 killagreg 80
/*****************************************************/
81
/*     Interrupt Service Routine for ADC             */
82
/*****************************************************/
750 killagreg 83
// The routine changes the ADC input muxer running
84
// thru the state machine by the following order.
85
// state 0: ch0 (yaw gyro)
86
// state 1: ch1 (roll gyro)
87
// state 2: ch2 (pitch gyro)
88
// state 3: ch4 (battery voltage -> UBat)
89
// state 4: ch6 (acc y -> Current_AccY)
90
// state 5: ch7 (acc x -> Current_AccX)
91
// state 6: ch0 (yaw gyro average with first reading   -> AdValueGyrYaw)
92
// state 7: ch1 (roll gyro average with first reading  -> AdValueGyrRoll)
93
// state 8: ch2 (pitch gyro average with first reading -> AdValueGyrPitch)
94
// state 9: ch5 (acc z add also 4th part of acc x and acc y to reading)
95
// state10: ch3 (air pressure averaging over 5 single readings -> tmpAirPressure)
96
 
683 killagreg 97
ISR(ADC_vect)
1 ingob 98
{
683 killagreg 99
    static uint8_t adc_channel = 0, state = 0;
701 killagreg 100
    static uint16_t yaw1, roll1, pitch1;
703 killagreg 101
    static uint8_t average_pressure = 0;
750 killagreg 102
    static int16_t tmpAirPressure = 0;
683 killagreg 103
    // disable further AD conversion
104
    ADC_Disable();
105
    // state machine
1 ingob 106
    switch(state++)
107
        {
108
        case 0:
701 killagreg 109
            yaw1 = ADC; // get Gyro Yaw Voltage 1st sample
683 killagreg 110
            adc_channel = 1; // set next channel to ADC1 = ROLL GYRO
711 killagreg 111
            MeasurementCounter++; // increment total measurement counter
1 ingob 112
            break;
113
        case 1:
683 killagreg 114
            roll1 = ADC; // get Gyro Roll Voltage 1st sample
701 killagreg 115
            adc_channel = 2; // set next channel to ADC2 = PITCH GYRO
1 ingob 116
            break;
117
        case 2:
701 killagreg 118
            pitch1 = ADC; // get Gyro Pitch Voltage 1st sample
683 killagreg 119
            adc_channel = 4; // set next channel to ADC4 = UBAT
1 ingob 120
            break;
121
        case 3:
683 killagreg 122
                // get actual UBat (Volts*10) is ADC*30V/1024*10 = ADC/3
123
            UBat = (3 * UBat + ADC / 3) / 4; // low pass filter updates UBat only to 1 quater with actual ADC value
124
            adc_channel = 6; // set next channel to ADC6 = ACC_Y
1 ingob 125
            break;
126
        case 4:
750 killagreg 127
            AdValueAccRoll = NeutralAccY - ADC; // get acceleration in Y direction
683 killagreg 128
            adc_channel = 7; // set next channel to ADC7 = ACC_X
1 ingob 129
            break;
130
        case 5:
750 killagreg 131
            AdValueAccPitch = ADC - NeutralAccX; // get acceleration in X direction
701 killagreg 132
                    adc_channel = 0; // set next channel to ADC7 = YAW GYRO
1 ingob 133
            break;
134
        case 6:
701 killagreg 135
                // average over two samples to create current AdValueGyrYaw
136
            if(BoardRelease == 10)  AdValueGyrYaw = (ADC + yaw1) / 2;
750 killagreg 137
                        else                                    AdValueGyrYaw = ADC + yaw1; // gain is 2 times lower on FC 1.1
683 killagreg 138
            adc_channel = 1; // set next channel to ADC7 = ROLL GYRO
401 hbuss 139
            break;
140
        case 7:
701 killagreg 141
                // average over two samples to create current ADValueGyrRoll
685 killagreg 142
            if(BoardRelease == 10)  AdValueGyrRoll = (ADC + roll1) / 2;
750 killagreg 143
                        else                                    AdValueGyrRoll = ADC + roll1; // gain is 2 times lower on FC 1.1
701 killagreg 144
            adc_channel = 2; // set next channel to ADC2 = PITCH GYRO
401 hbuss 145
            break;
146
        case 8:
701 killagreg 147
                // average over two samples to create current ADValuePitch
148
            if(BoardRelease == 10)  AdValueGyrPitch = (ADC + pitch1) / 2;
750 killagreg 149
                        else                                    AdValueGyrPitch = ADC + pitch1; // gain is 2 times lower on FC 1.1
683 killagreg 150
            adc_channel = 5; // set next channel to ADC5 = ACC_Z
401 hbuss 151
            break;
152
       case 9:
683 killagreg 153
                // get z acceleration
154
            AdValueAccTop =  (int16_t) ADC - NeutralAccZ; // get plain acceleration in Z direction
750 killagreg 155
            AdValueAccTop += abs(AdValueAccPitch) / 4 + abs(AdValueAccRoll) / 4;
683 killagreg 156
            if(AdValueAccTop > 1)
1 ingob 157
             {
750 killagreg 158
                if(NeutralAccZ < 800) NeutralAccZ+= 0.02;
683 killagreg 159
             }
160
             else if(AdValueAccTop < -1)
1 ingob 161
             {
750 killagreg 162
                if(NeutralAccZ > 600) NeutralAccZ-= 0.02;
683 killagreg 163
             }
164
            Current_AccZ = ADC;
701 killagreg 165
            Reading_Integral_Top += AdValueAccTop;      // Integrieren
166
            Reading_Integral_Top -= Reading_Integral_Top / 1024; // dämfen
683 killagreg 167
                adc_channel = 3; // set next channel to ADC3 = air pressure
1 ingob 168
            break;
401 hbuss 169
        case 10:
701 killagreg 170
            tmpAirPressure += ADC; // sum vadc values
703 killagreg 171
            if(++average_pressure >= 5) // if 5 values are summerized for averaging
750 killagreg 172
            {
701 killagreg 173
                ReadingAirPressure = ADC; // update measured air pressure
703 killagreg 174
                                HightD = (int16_t)(StartAirPressure - tmpAirPressure - ReadingHight);  // D-Anteil = neuerWert - AlterWert
701 killagreg 175
                AirPressure = (tmpAirPressure + 3 * AirPressure) / 4; // averaging using history
176
                ReadingHight = StartAirPressure - AirPressure;
750 killagreg 177
                average_pressure = 0; // reset air pressure measurement counter
701 killagreg 178
                tmpAirPressure = 0;
750 killagreg 179
            }
683 killagreg 180
            adc_channel = 0; // set next channel to ADC0 = GIER GYRO
750 killagreg 181
            state = 0; // reset state machine
1 ingob 182
            break;
683 killagreg 183
        default:
184
            adc_channel = 0;
1 ingob 185
            state = 0;
186
            break;
683 killagreg 187
        }
188
    // set adc muxer to next adc_channel
189
    ADMUX = (ADMUX & 0xE0) | adc_channel;
750 killagreg 190
    // after full cycle stop further interrupts
683 killagreg 191
    if(state != 0) ADC_Enable();
1 ingob 192
}