Subversion Repositories Projects

Rev

Rev 642 | Go to most recent revision | Details | Last modification | View Log | RSS feed

Rev Author Line No. Line
641 FredericG 1
[[TableOfContents(2)]]
2
 
3
= What is the VibrationTest Tool? =
4
The tool evaluates the vibration generated by the motors which allows balancing motor/prop assemblies and experimenting with different motor-mounts. The test uses the MK build-in sensors, so no extra hardware is required.
5
 
6
Reducing vibration is very important, especially for Aerial Photography or Video. Vibrations result in blurry footage. Some claim that high frequency vibrations can be picked up by the Optical Image Stabilization lens assembly which is incorporated in almost all recent cameras. The OIS is not designed for these vibrations and makes thing worse, even when you switch the OIS feature off in the camera menu.
7
In addition, the FlightControl sensors pickup the vibrations and this deteriorates performance; the new FC ME comes with vibration dampers in order to reduce the vibrations transferred to the FC.
8
 
9
Propellers can be balanced the traditional way. However it was discovered that also the motors need balancing. One way to accomplish this is let a small unbalance in the prop compensate the motor unbalance, so the orientation of the prop is important (see [http://www.rcgroups.com/forums/showpost.php?p=12832508&postcount=228 this post]). Looking at the vibraions of a running motor allows balancing the prop/motor assembly as a whole.
10
 
11
= How does it work? =
12
The standard FlightControl program samples all sensors periodically and provides a command to read the latest sample from all sensors. The MKTool uses this command to generate graphs of the analog values. In a first approach the VibrationTest used this standard command to monitor vibrations. The problem is that this mechanism only allows to sample the values 30 times a second. The actual shape of the signals cannot be determined and one can only hope to catch the peak values. In order to get reliable results the values need to be monitored for a long time (a minute for example).
13
 
14
This new approach is based on dedicated FlightControl software providing a new command. The new command instructs the FC to sample one of the sensors as fast as possible and store the info in its internal memory. Afterwards the recorded data can be read to analysis. This allows to grab a reliable signal in a very short time. This approach can capture about 11000 samples a second, 500 times more than the MKTool can.
15
 
16
This is an example of the signal measured by the Roll-ACC sensor:
17
[[Anchor(SampleSignalJpg)]]
18
attachment:test.jpg
19
 
20
= Current Project status =
21
/!\ ~+'''The version available now (version 0.0) is an alpha version; it was only tested by a limited amount of people. More testers/evaluators are very welcome!'''+~
22
[[BR]][[BR]]
23
The current implementation does not provide a graphical user interface; it is a "command-line" tool. While this approach is a bit less user-friendly, it allows to experiments more freely, which is important at this stage of the project. Later a more fancy user-interface might be added.
24
[[BR]][[BR]]
25
At the time of writing, the tool was tested in combination with:
26
 * PC/Windows XP and Vista
27
 * FC 1.2 and FC 1.3
28
Theoretically the tool should also run on MAC and Linux.
29
[[BR]][[BR]]
30
Features in the pipeline
31
 * Option to change the minimum battery voltage
32
 * Filtering of the signal
33
 * Graphical User Interface
34
 * Automatic backup and restore of flight settings
35
 * Automatic installing and restore of RC flight code
36
[[BR]][[BR]]
37
[http://www.rcgroups.com/forums/showpost.php?p=13250870&postcount=8170 Preview of the GUI version]
38
[[BR]][[BR]]
39
{i} [http://forum.mikrokopter.de/topic-11446.html MK Forum thread for discussions]
40
[[BR]]
41
{i} [[MailTo(frederic AT rc-flight DOT be)]]
42
 
43
= How do I install the tool? =
44
The tool is written in programming language called [http://en.wikipedia.org/wiki/Python_(programming_language) Python].
45
 
46
The most logic and clean way to run the tool is to install support for Python on your PC (if you do not have it already). Python is also available for Linux and MAC; the tool should also run on these platforms, but I have never tried it.
47
 
48
If you do not feel like installing Python, a version that is compiled to a windows executable is provided.
49
 
50
So, you have two options.
51
 
52
[[Anchor(InstallPython)]]
53
== Option 1: Install Python ==
54
For a Windows machine I propose you install:
55
 
56
 * [http://www.activestate.com/activepython/ ActivePython for Windows] Press the big "ActivePython Download Now" button.
57
 * [http://sourceforge.net/projects/pyserial/files/ PySerial (support for serial port access)] Select "pyserial-2.5-rc1.win32.exe" on that page.
58
Once you have Python support on your PC, unzip [http://www.rc-flight.be/VibrationTest/VibrationTest_0_0.zip VibrationTest_0_0.zip] to a directory on your PC.
59
 
60
== Option 2: Get the compiled version ==
61
unzip [http://www.rc-flight.be/VibrationTest/VibrationTestExe_0_0.zip VibrationTestExe_0_0.zip] to a directory on your PC
62
 
63
 
64
= How do I use the tool? =
65
== Prepare your MK ==
66
 
67
=== Secure your MK ===
68
I use luggage straps to secure my MK to the table while it is still able to vibrate:
69
 
70
attachment:mk1InTest.jpg
71
 
72
=== Installing the FlightControl software ===
73
The VibrationTest tool only works in combination with a special version of the FlightControl software. It must be flashed in the FC board before using the test and '''you need to reinstall your regular software version afterwards'''. This just takes a few minutes. Switching the software is done the usual way, using the MKTool.
74
 
75
You will find the required hex file in the same directory with the VibrationTest tool.
76
 
77
/!\ '''The FC code for the VibrationTest is based 0.74d but is not fit for flying! Before flying, you will need to reinstall your initial FC code. When the version you use for flying is 0.74d, your settings should be preserved. In combination with other versions, it might not be the case. It is a good idea to backup yout settings to PC (via the MKTool) before installing the VibrationTest FC code. '''
78
 
79
After insatlling the FC code for the VibrationTest, the LC-Display in the MKTool will look like this:
80
 
81
attachment:LCDisplay.jpg
82
 
83
== The command line ==
84
The current implementation of the tool does not have a graphical user interface. The simplest way to use the tool is from the command prompt.
85
 
86
On Windows XP open a command shell by selecting Start>Run and typing "cmd".
87
 
88
On Windows Vista, click Start and type "cmd.exe" in the "Start Search" box.
89
 
90
Now, if you have for example unzipped the tool (the Pyhton version or the compiled version) in directory "D:\MK\VibrationToolExe" you should go to that directory by typing:
91
 
92
{{{
93
D:
94
cd \MK\VibrationToolExe
95
}}}
96
Now, the tool can be started by just typing "VibrationTest.py" if you have installed Python or "VibrationTest" if you use the compiled version. Without any parameters, it tool should display a description of the required parameters.
97
 
98
attachment:cmdLine.jpg
99
 
100
== The command line parameters ==
101
The tool expects to be started with a few parameters. When the tool is started without or invalid parameters, a brief description of the expected parameters is displayed:
102
 
103
{{{
104
VibrationTest.py COMPORT MOTORS SPEEDS CHANNELS [-m MINSPEED] [-s NBSAMPLES] [-n NAME] [-d FILENAME] [-v]
105
 COMPORT         Serial port to use. e.g. COM4
106
 MOTORS          Motors to activate during test. Multiple motors can be used at the same time. e.g. 1,2,3,4
107
 SPEEDS          Indicates at what speeds the motors need to be tested.
108
                   Format 1:  e.g. 50,110,140            Tests at speeds 50, 110 and 140
109
                   Format 2:  e.g. 100-200:50            Tests at speeds 100, 150 and 200
110
 CHANNELS        Channels to monitor. e.g. 5,6,7
111
                   Channel 0 = GyroYaw
112
                   Channel 1 = GyroRoll
113
                   Channel 2 = GyroNick
114
                   Channel 3 = Pressure
115
                   Channel 4 = Batt
116
                   Channel 5 = AccTop
117
                   Channel 6 = AccRoll
118
                   Channel 7 = AccNick
119
 -m MINSPEED     Minimum speed of the motor(s)
120
 -s NBSAMPLES    Number of samples
121
 -n NAME         Name of the test
122
 -d FILENAME     File to which the measured values will be logged in
123
 -v              Verbose
124
}}}
125
4 parameters are mandatory: COMPORT MOTORS SPPEDS and CHANNELS
126
 
127
 * '''COMPORT''': The serial port that is connected to the MK e.g. "COM4"
128
 * '''MOTORS''': List of motors (comma-separated) that need to run during the test. Typically only one motor will be selected. It is also possible to activate all motors to evaluate the global vibrations before and after calibration for example. e.g. "1" or "1,2,3,4"
129
 * '''SPEEDS''': List of speeds at which will be tested. The "speed" is the I2C value that will be sent to controller and is a value between 0 and 255. Typically interesting values for vibration-testing vary between 100 and 200. [[BR]]There are 2 formats possible. First there is the simple list of speeds, e.g. "100,150,190,200". The second format specifies the minimum, maximum speed and step, e.g. "100-200:20" will test at 100,120,140 ... 200
130
 * '''CHANNELS''': List of "channels" that will be monitored. A channel is in fact one of the MK analog sensors. Measuring the pressure or battery does not make much sense in this context, but is it possible. It is my experience that channel 6 and 7 produce best vibration signals, but YMMV.
131
 
132
[[BR]] In addition, these optional parameters can be provided
133
 
134
 * '''-m MINSPEED''': The motor(s) will first be started at "idle" speed before being spooled up to the speed at which the measurement will take place. By default, this speed is 25 but it can be changed with this option. Your motors need to run smootly and start reliably at this speed. In combination with the TP converted ESC for example, the default value of 25 will be too low.
135
 * '''-s NBSAMPLES''': During a measurement, the FlightControl board will monitor a given channel and store 1000 samples in memory. Afterwards the VibrationTool will read these samples. These samples can be dumped in a file (see the "-d" option) and will be used to find the amplitude of the signal (the difference between the minimum and maximum measured value). [[BR]]It is important to read enough samples to cover a few periods. By default 400 samples are read but with this option, the number of samples can be modified (with a maximum of 1000).
136
 * '''-n NAME''': An indication of what you are testing. This string will be added to the dumps (see "-d" option) and should not contain spaces e.g. "-n AfterBalancing"
137
 * '''-d FILENAME''': With this option, all samples will be dumped in a text-file. This file can later be used for further analysis. It can for example be inported in MS Excel or OpenOffice Calc to make graphs of the vibration signal. When the file does not exist yet it will be created, otherwise the new data will be added. All measurements dumped in the same file should have the same number of samples (see the "-s" option) e.g. "-d motor1.txt"
138
 * '''-v''': With this option, the tool will be much more verbose; it will indicate what it is doing. Also when an error occurs, the tool will provide more technical details (the callstack)
139
 
140
== The output ==
141
=== The results on the screen ===
142
Without the "-v" option, only the results of the test is displayed:
143
{{{
144
C:\DATA\temp\VibrationTestExe>VibrationTest COM5 1 100,150 6 -n Demo
145
      Demo Speed=100 U=12.1V Channel=AccRoll    Min=497 Max=506 pp=  9 *
146
      Demo Speed=150 U=11.9V Channel=AccRoll    Min=498 Max=508 pp= 10 **
147
}}}
148
 * "'''Demo'''" This is the name of the test as we provided with the "-n" option.
149
 * "'''Speed=100'''" Indicates the motor speed for this measurement
150
 * "'''U=12.1V'''" The measured battery voltage when the measurement was done
151
 * "'''Channel=AccRoll'''" The measured channel
152
 * "'''Min=497'''" Lowest value of all samples
153
 * "'''Max=506'''" Highest vale of all samples
154
 * "'''pp=9'''" Difference between Min and Max, this is the actual result
155
 * "'''**'''" The number of stars gives a quick indication of the pp-value
156
 
157
 
158
With the "-v" option more details are provided:
159
{{{
160
C:\DATA\temp\VibrationTestExe>VibrationTest COM5 1 100,150 6 -n Demo -v
161
comPort  = COM5
162
motors   = ['1']
163
minSpeed = 25
164
speeds   = ['100', '150']
165
channels = ['6']
166
nbSamples= 400
167
fileName = None
168
testName = Demo
169
Opening comPort...
170
Version: 0.74
171
Voltage: 12.1V
172
Minimum Voltage: 10.5V
173
Starting motor(s) (speed=25)...  OK
174
Setting speed to 100 ...
175
Getting data...        Demo Speed=100 U=12.1V Channel=AccRoll    Min=496 Max=508 pp= 12 **
176
Setting speed to 150 ...
177
Getting data...        Demo Speed=150 U=11.9V Channel=AccRoll    Min=497 Max=508 pp= 11 **
178
}}}
179
 
180
=== The dumped signal ===
181
The "-d" option allows to dump the measured signal in a text-file. This is a "comma-separated" text file that can easily be imported in MS Excel or OpenOffice Calc.
182
 
183
[[Anchor(DumpedSignalJpg)]]
184
attachment:calc.jpg
185
 
186
1000 samples are acoputed in about 90ms (0.09 s), the time between samples is about 0.9 ms (0.00009 s).
187
Suppose the prop is spinning at 5000 RPM, this means 83 rotations per second. In 0.09s we have captured 7.5 rotations. We we take 400 of the 1000 samples we should see 7.5/1000*400 = 3 rotations of the prop.
188
 
189
 
190
== Proposed procedure to balance prop/motor assembly ==
191
First we need to find what what sensor provides the "best" footage of the vibrations. The largest signal is probably the best. Candidates are Gyro and Acc signals. My experience is that AccNick (channel 7) and especially AccRoll (channel 6) provide the nicest signal, but YMMV. The vibration will typically peak at a certain motor speed. So, first we perform a sweep between speeds 100 to 200 and look at channels 6 and 7 and choose a channel and speed we will concentrate on.
192
 
193
Next I check if the prop can be balanced a bit better. I stick small strips of tape to the prop, close to the center. One strip to the side where the prop-dimension is mentioned I denote as "-1", one strip on the other side, I denote "+1". I test different configurations and check what gives the best results for my chosen channel and speed.
194
 
195
Now that the prop is better balanced, I start to rotate the prop in relation to the motor. As names for the test I use "XsA" where "X" is the number of strips and "A" is the angle; e.g. "+1s60" means 2 strips (opposite to the prop-marking) and rotated by 60 degrees (compared to the starting position). Again I try to find the best position.
196
 
197
Once we have found the best rotation, we can rebalance the prop in the same way as before.
198
 
199
After all this we should have found the best combination. We can perform the swipe again to compare with the starting point.
200
 
201
 
202
=== Example 1 ===
203
This is an example with standard Roxxy 2824-34 motor with EPP 1045 prop.
204
[[BR]]
205
 
206
Finding what sensor provides best information at what speed:
207
 
208
{{{
209
VibrationTest.py COM5 3 100-200:20 6,7
210
      Speed=100 U=11.3V Channel=AccRoll    Min=492 Max=505 pp= 13 **
211
      Speed=100 U=11.3V Channel=AccNick    Min=498 Max=507 pp=  9 *
212
      Speed=120 U=11.3V Channel=AccRoll    Min=489 Max=503 pp= 14 **
213
      Speed=120 U=11.3V Channel=AccNick    Min=497 Max=507 pp= 10 **
214
      Speed=140 U=11.2V Channel=AccRoll    Min=469 Max=519 pp= 50 **********        <<=======
215
      Speed=140 U=11.2V Channel=AccNick    Min=495 Max=508 pp= 13 **
216
      Speed=160 U=11.1V Channel=AccRoll    Min=478 Max=517 pp= 39 *******
217
      Speed=160 U=11.1V Channel=AccNick    Min=493 Max=511 pp= 18 ***
218
      Speed=180 U=10.9V Channel=AccRoll    Min=479 Max=511 pp= 32 ******
219
      Speed=180 U=10.9V Channel=AccNick    Min=493 Max=514 pp= 21 ****
220
      Speed=200 U=10.7V Channel=AccRoll    Min=479 Max=515 pp= 36 *******
221
      Speed=200 U=10.7V Channel=AccNick    Min=493 Max=513 pp= 20 ****
222
 
223
VibrationTest.py COM5 3 130-160:10 6
224
      Speed=130 U=11.1V Channel=AccRoll    Min=484 Max=511 pp= 27 *****
225
      Speed=140 U=11.1V Channel=AccRoll    Min=469 Max=524 pp= 55 ***********
226
      Speed=150 U=11.1V Channel=AccRoll    Min=475 Max=520 pp= 45 *********
227
      Speed=160 U=11.1V Channel=AccRoll    Min=479 Max=518 pp= 39 *******
228
}}}
229
So, lets concentrate on channel 6 (AccRoll) at speed 140.
230
 
231
 
232
Now, the preliminary balancing of the prop:
233
 
234
{{{
235
VibrationTest.py COM5 3 140 6 -d motor3.txt -n 0s0
236
  0s0 Speed=140 U=11.0V Channel=AccRoll    Min=470 Max=521 pp= 51 **********
237
 
238
VibrationTest.py COM5 3 140 6 -d motor3.txt -n 1s0
239
  1s0 Speed=140 U=11.0V Channel=AccRoll    Min=482 Max=513 pp= 31 ******
240
 
241
VibrationTest.py COM5 3 140 6 -d motor3.txt -n 2s0
242
  2s0 Speed=140 U=11.0V Channel=AccRoll    Min=475 Max=520 pp= 45 *********
243
}}}
244
For now, 1 strip seems best.
245
 
246
Now, lets rotate the prop:
247
 
248
{{{
249
VibrationTest.py COM5 3 140 6 -d motor3.txt -n 1s0
250
  1s0 Speed=140 U=10.9V Channel=AccRoll    Min=481 Max=513 pp= 32 ******
251
 
252
VibrationTest.py COM5 3 140 6 -d motor3.txt -n 1s60
253
 1s60 Speed=140 U=10.9V Channel=AccRoll    Min=480 Max=512 pp= 32 ******
254
 
255
VibrationTest.py COM5 3 140 6 -d motor3.txt -n 1s120
256
1s120 Speed=140 U=10.9V Channel=AccRoll    Min=477 Max=514 pp= 37 *******
257
 
258
VibrationTest.py COM5 3 140 6 -d motor3.txt -n 1s180
259
1s180 Speed=140 U=10.9V Channel=AccRoll    Min=482 Max=509 pp= 27 *****
260
 
261
VibrationTest.py COM5 3 140 6 -d motor3.txt -n 1s240
262
1s240 Speed=140 U=10.9V Channel=AccRoll    Min=482 Max=510 pp= 28 *****
263
 
264
VibrationTest.py COM5 3 140 6 -d motor3.txt -n 1s300
265
1s300 Speed=140 U=10.9V Channel=AccRoll    Min=482 Max=514 pp= 32 ******
266
 
267
VibrationTest.py COM5 3 140 6,6,6 -d motor3.txt -n 1s360
268
1s360 Speed=140 U=10.9V Channel=AccRoll    Min=482 Max=515 pp= 33 ******
269
}}}
270
Rotating the prop by 180 degrees produces best results, now lets try to balance the prop again:
271
 
272
{{{
273
VibrationTest.py COM5 3 140 6 -d motor3.txt -n 1s180
274
1s180 Speed=140 U=10.9V Channel=AccRoll    Min=483 Max=509 pp= 26 *****
275
 
276
VibrationTest.py COM5 3 140 6 -d motor3.txt -n 0s180
277
0s180 Speed=140 U=10.9V Channel=AccRoll    Min=472 Max=519 pp= 47 *********
278
 
279
VibrationTest.py COM5 3 140 6 -d motor3.txt -n 1s180
280
1s180 Speed=140 U=10.9V Channel=AccRoll    Min=483 Max=510 pp= 27 *****
281
 
282
VibrationTest.py COM5 3 140 6 -d motor3.txt -n 2s180
283
2s180 Speed=140 U=10.9V Channel=AccRoll    Min=489 Max=508 pp= 19 ***
284
 
285
VibrationTest.py COM5 3 140 6 -d motor3.txt -n 3s180
286
3s180 Speed=140 U=10.9V Channel=AccRoll    Min=483 Max=512 pp= 29 *****
287
}}}
288
So, 2 stickers is best, let's verify again:
289
 
290
{{{
291
VibrationTest.py COM5 3 140 6 -d motor3.txt -n 2s180
292
2s180 Speed=140 U=10.9V Channel=AccRoll    Min=488 Max=508 pp= 20 ****
293
 
294
VibrationTest.py COM5 3 140 6 -d motor3.txt -n end
295
  end Speed=140 U=10.8V Channel=AccRoll    Min=487 Max=510 pp= 23 ****
296
}}}
297
 
298
[[BR]]
299
Now, we can perform a sweep in order to compare with the starting-point:
300
 
301
{{{
302
VibrationTest.py COM5 3 100-200:20 6,7
303
       Speed=100 U=11.1V Channel=AccRoll    Min=493 Max=501 pp=  8 *
304
       Speed=100 U=11.1V Channel=AccNick    Min=499 Max=507 pp=  8 *
305
       Speed=120 U=11.1V Channel=AccRoll    Min=489 Max=507 pp= 18 ***
306
       Speed=120 U=11.1V Channel=AccNick    Min=497 Max=508 pp= 11 **
307
       Speed=140 U=11.0V Channel=AccRoll    Min=489 Max=507 pp= 18 ***
308
       Speed=140 U=11.0V Channel=AccNick    Min=498 Max=509 pp= 11 **
309
       Speed=160 U=10.9V Channel=AccRoll    Min=482 Max=508 pp= 26 *****
310
       Speed=160 U=10.9V Channel=AccNick    Min=496 Max=510 pp= 14 **
311
       Speed=180 U=10.7V Channel=AccRoll    Min=489 Max=505 pp= 16 ***
312
       Speed=180 U=10.7V Channel=AccNick    Min=495 Max=508 pp= 13 **
313
       Speed=200 U=10.6V Channel=AccRoll    Min=482 Max=508 pp= 26 *****
314
       Speed=200 U=10.6V Channel=AccNick    Min=491 Max=509 pp= 18 ***
315
}}}
316
= Links =
317
 * [http://forum.mikrokopter.de/topic-11446.html MK Forum thread for discussions]
318
 * [http://svn.mikrokopter.de/mikrowebsvn/listing.php?repname=Projects&path=/VibrationTest/#_VibrationTest_ VibrationTest Project in Subversion]
319
 * [http://www.rcgroups.com/forums/showthread.php?t=1006721 Old Man Mike "Test Fixture Evaluates Motors/Props/ESCs for Quadcopter Performance"]
320
 * Mail FredericG: [[MailTo(frederic AT rc-flight DOT be)]]
321
[[BR]]
322
 
323
## [[AttachList]]
324
 
325
----
326
 . KategorieTools