Go to most recent revision | Details | Last modification | View Log | RSS feed
Rev | Author | Line No. | Line |
---|---|---|---|
838 | - | 1 | /*--------------------------------------------------------------------------------------------------------------------------------------------------- |
2 | * irmp.h |
||
3 | * |
||
4 | * Copyright (c) 2009-2010 Frank Meyer - frank(at)fli4l.de |
||
5 | * |
||
6 | * $Id: irmp.h,v 1.44 2010/11/09 19:18:32 fm Exp $ |
||
7 | * |
||
8 | * ATMEGA88 @ 8 MHz |
||
9 | * |
||
10 | * This program is free software; you can redistribute it and/or modify |
||
11 | * it under the terms of the GNU General Public License as published by |
||
12 | * the Free Software Foundation; either version 2 of the License, or |
||
13 | * (at your option) any later version. |
||
14 | *--------------------------------------------------------------------------------------------------------------------------------------------------- |
||
15 | */ |
||
16 | |||
17 | #ifndef _WC_IRMP_H_ |
||
18 | #define _WC_IRMP_H_ |
||
19 | |||
20 | #ifdef __cplusplus |
||
21 | extern "C" |
||
22 | { |
||
23 | #endif |
||
24 | |||
25 | /*--------------------------------------------------------------------------------------------------------------------------------------------------- |
||
26 | * timing constants: |
||
27 | *--------------------------------------------------------------------------------------------------------------------------------------------------- |
||
28 | */ |
||
29 | #define IRMP_TIMEOUT_TIME 16500.0e-6 // timeout after 16.5 ms darkness |
||
30 | #define IRMP_TIMEOUT_TIME_MS 16500L // timeout after 16.5 ms darkness |
||
31 | |||
32 | #if IRMP_SUPPORT_NIKON_PROTOCOL == 1 |
||
33 | #define IRMP_TIMEOUT_NIKON_TIME 29500.0e-6 // 2nd timeout after 29.5 ms darkness (only for NIKON!) |
||
34 | #define IRMP_TIMEOUT_NIKON_TIME_MS 29500L // 2nd timeout after 29.5 ms darkness |
||
35 | typedef uint16_t PAUSE_LEN; |
||
36 | #define IRMP_TIMEOUT_NIKON_LEN (PAUSE_LEN)(F_INTERRUPTS * IRMP_TIMEOUT_NIKON_TIME + 0.5) |
||
37 | #else |
||
38 | #if (F_INTERRUPTS * IRMP_TIMEOUT_TIME_MS) / 1000000 >= 254 |
||
39 | typedef uint16_t PAUSE_LEN; |
||
40 | #else |
||
41 | typedef uint8_t PAUSE_LEN; |
||
42 | #endif |
||
43 | #endif |
||
44 | |||
45 | #define IRMP_TIMEOUT_LEN (PAUSE_LEN)(F_INTERRUPTS * IRMP_TIMEOUT_TIME + 0.5) |
||
46 | |||
47 | /*--------------------------------------------------------------------------------------------------------------------------------------------------- |
||
48 | * IR protocols |
||
49 | *--------------------------------------------------------------------------------------------------------------------------------------------------- |
||
50 | */ |
||
51 | #define IRMP_SIRCS_PROTOCOL 1 // Sony |
||
52 | #define IRMP_NEC_PROTOCOL 2 // NEC, Pioneer, JVC, Toshiba, NoName etc. |
||
53 | #define IRMP_SAMSUNG_PROTOCOL 3 // Samsung |
||
54 | #define IRMP_MATSUSHITA_PROTOCOL 4 // Matsushita |
||
55 | #define IRMP_KASEIKYO_PROTOCOL 5 // Kaseikyo (Panasonic etc) |
||
56 | #define IRMP_RECS80_PROTOCOL 6 // Philips, Thomson, Nordmende, Telefunken, Saba |
||
57 | #define IRMP_RC5_PROTOCOL 7 // Philips etc |
||
58 | #define IRMP_DENON_PROTOCOL 8 // Denon |
||
59 | #define IRMP_RC6_PROTOCOL 9 // Philips etc |
||
60 | #define IRMP_SAMSUNG32_PROTOCOL 10 // Samsung32: no sync pulse at bit 16, length 32 instead of 37 |
||
61 | #define IRMP_APPLE_PROTOCOL 11 // Apple, very similar to NEC |
||
62 | #define IRMP_RECS80EXT_PROTOCOL 12 // Philips, Technisat, Thomson, Nordmende, Telefunken, Saba |
||
63 | #define IRMP_NUBERT_PROTOCOL 13 // Nubert |
||
64 | #define IRMP_BANG_OLUFSEN_PROTOCOL 14 // Bang & Olufsen |
||
65 | #define IRMP_GRUNDIG_PROTOCOL 15 // Grundig |
||
66 | #define IRMP_NOKIA_PROTOCOL 16 // Nokia |
||
67 | #define IRMP_SIEMENS_PROTOCOL 17 // Siemens, e.g. Gigaset |
||
68 | #define IRMP_FDC_PROTOCOL 18 // FDC keyboard |
||
69 | #define IRMP_RCCAR_PROTOCOL 19 // RC Car |
||
70 | #define IRMP_JVC_PROTOCOL 20 // JVC |
||
71 | #define IRMP_RC6A_PROTOCOL 21 // RC6A, e.g. Kathrein, XBOX |
||
72 | #define IRMP_NIKON_PROTOCOL 22 // Nikon |
||
73 | |||
74 | // some flags of struct IRMP_PARAMETER: |
||
75 | #define IRMP_PARAM_FLAG_IS_MANCHESTER 0x01 |
||
76 | #define IRMP_PARAM_FLAG_1ST_PULSE_IS_1 0x02 |
||
77 | |||
78 | #define SIRCS_START_BIT_PULSE_TIME 2400.0e-6 // 2400 usec pulse |
||
79 | #define SIRCS_START_BIT_PAUSE_TIME 600.0e-6 // 600 usec pause |
||
80 | #define SIRCS_1_PULSE_TIME 1200.0e-6 // 1200 usec pulse |
||
81 | #define SIRCS_0_PULSE_TIME 600.0e-6 // 600 usec pulse |
||
82 | #define SIRCS_PAUSE_TIME 600.0e-6 // 600 usec pause |
||
83 | #define SIRCS_FRAMES 3 // SIRCS sends each frame 3 times |
||
84 | #define SIRCS_AUTO_REPETITION_PAUSE_TIME 25.0e-3 // auto repetition after 25ms |
||
85 | #define SIRCS_FRAME_REPEAT_PAUSE_TIME 25.0e-3 // frame repeat after 25ms |
||
86 | #define SIRCS_ADDRESS_OFFSET 15 // skip 15 bits |
||
87 | #define SIRCS_ADDRESS_LEN 5 // read up to 5 address bits |
||
88 | #define SIRCS_COMMAND_OFFSET 0 // skip 0 bits |
||
89 | #define SIRCS_COMMAND_LEN 15 // read 12-15 command bits |
||
90 | #define SIRCS_MINIMUM_DATA_LEN 12 // minimum data length |
||
91 | #define SIRCS_COMPLETE_DATA_LEN 20 // complete length - may be up to 20 |
||
92 | #define SIRCS_STOP_BIT 0 // has no stop bit |
||
93 | #define SIRCS_LSB 1 // LSB...MSB |
||
94 | #define SIRCS_FLAGS 0 // flags |
||
95 | |||
96 | #define NEC_START_BIT_PULSE_TIME 9000.0e-6 // 9000 usec pulse |
||
97 | #define NEC_START_BIT_PAUSE_TIME 4500.0e-6 // 4500 usec pause |
||
98 | #define NEC_REPEAT_START_BIT_PAUSE_TIME 2250.0e-6 // 2250 usec pause |
||
99 | #define NEC_PULSE_TIME 560.0e-6 // 560 usec pulse |
||
100 | #define NEC_1_PAUSE_TIME 1690.0e-6 // 1690 usec pause |
||
101 | #define NEC_0_PAUSE_TIME 560.0e-6 // 560 usec pause |
||
102 | #define NEC_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms |
||
103 | #define NEC_ADDRESS_OFFSET 0 // skip 0 bits |
||
104 | #define NEC_ADDRESS_LEN 16 // read 16 address bits |
||
105 | #define NEC_COMMAND_OFFSET 16 // skip 16 bits (8 address + 8 /address) |
||
106 | #define NEC_COMMAND_LEN 16 // read 16 bits (8 command + 8 /command) |
||
107 | #define NEC_COMPLETE_DATA_LEN 32 // complete length |
||
108 | #define NEC_STOP_BIT 1 // has stop bit |
||
109 | #define NEC_LSB 1 // LSB...MSB |
||
110 | #define NEC_FLAGS 0 // flags |
||
111 | |||
112 | #define SAMSUNG_START_BIT_PULSE_TIME 4500.0e-6 // 4500 usec pulse |
||
113 | #define SAMSUNG_START_BIT_PAUSE_TIME 4500.0e-6 // 4500 usec pause |
||
114 | #define SAMSUNG_PULSE_TIME 550.0e-6 // 550 usec pulse |
||
115 | #define SAMSUNG_1_PAUSE_TIME 1450.0e-6 // 1450 usec pause |
||
116 | #define SAMSUNG_0_PAUSE_TIME 450.0e-6 // 450 usec pause |
||
117 | #define SAMSUNG_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms |
||
118 | #define SAMSUNG_ADDRESS_OFFSET 0 // skip 0 bits |
||
119 | #define SAMSUNG_ADDRESS_LEN 16 // read 16 address bits |
||
120 | #define SAMSUNG_ID_OFFSET 17 // skip 16 + 1 sync bit |
||
121 | #define SAMSUNG_ID_LEN 4 // read 4 id bits |
||
122 | #define SAMSUNG_COMMAND_OFFSET 21 // skip 16 + 1 sync + 4 data bits |
||
123 | #define SAMSUNG_COMMAND_LEN 16 // read 16 command bits |
||
124 | #define SAMSUNG_COMPLETE_DATA_LEN 37 // complete length |
||
125 | #define SAMSUNG_STOP_BIT 1 // has stop bit |
||
126 | #define SAMSUNG_LSB 1 // LSB...MSB? |
||
127 | #define SAMSUNG_FLAGS 0 // flags |
||
128 | |||
129 | #define SAMSUNG32_COMMAND_OFFSET 16 // skip 16 bits |
||
130 | #define SAMSUNG32_COMMAND_LEN 16 // read 16 command bits |
||
131 | #define SAMSUNG32_COMPLETE_DATA_LEN 32 // complete length |
||
132 | #define SAMSUNG32_FRAMES 2 // SAMSUNG32 sends each frame 2 times |
||
133 | #define SAMSUNG32_AUTO_REPETITION_PAUSE_TIME 47.0e-3 // repetition after 47 ms |
||
134 | #define SAMSUNG32_FRAME_REPEAT_PAUSE_TIME 47.0e-3 // frame repeat after 40ms |
||
135 | |||
136 | #define MATSUSHITA_START_BIT_PULSE_TIME 3488.0e-6 // 3488 usec pulse |
||
137 | #define MATSUSHITA_START_BIT_PAUSE_TIME 3488.0e-6 // 3488 usec pause |
||
138 | #define MATSUSHITA_PULSE_TIME 872.0e-6 // 872 usec pulse |
||
139 | #define MATSUSHITA_1_PAUSE_TIME 2616.0e-6 // 2616 usec pause |
||
140 | #define MATSUSHITA_0_PAUSE_TIME 872.0e-6 // 872 usec pause |
||
141 | #define MATSUSHITA_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms |
||
142 | #define MATSUSHITA_ADDRESS_OFFSET 12 // skip 12 bits |
||
143 | #define MATSUSHITA_ADDRESS_LEN 12 // read 12 address bits |
||
144 | #define MATSUSHITA_COMMAND_OFFSET 0 // skip 0 bits |
||
145 | #define MATSUSHITA_COMMAND_LEN 12 // read 12 bits (6 custom + 6 command) |
||
146 | #define MATSUSHITA_COMPLETE_DATA_LEN 24 // complete length |
||
147 | #define MATSUSHITA_STOP_BIT 1 // has stop bit |
||
148 | #define MATSUSHITA_LSB 1 // LSB...MSB? |
||
149 | #define MATSUSHITA_FLAGS 0 // flags |
||
150 | |||
151 | #define KASEIKYO_START_BIT_PULSE_TIME 3380.0e-6 // 3380 usec pulse |
||
152 | #define KASEIKYO_START_BIT_PAUSE_TIME 1690.0e-6 // 1690 usec pause |
||
153 | #define KASEIKYO_PULSE_TIME 423.0e-6 // 525 usec pulse |
||
154 | #define KASEIKYO_1_PAUSE_TIME 1269.0e-6 // 525 usec pause |
||
155 | #define KASEIKYO_0_PAUSE_TIME 423.0e-6 // 1690 usec pause |
||
156 | #define KASEIKYO_AUTO_REPETITION_PAUSE_TIME 74.0e-3 // repetition after 74 ms |
||
157 | #define KASEIKYO_FRAME_REPEAT_PAUSE_TIME 74.0e-3 // frame repeat after 74 ms |
||
158 | #define KASEIKYO_ADDRESS_OFFSET 0 // skip 0 bits |
||
159 | #define KASEIKYO_ADDRESS_LEN 16 // read 16 address bits |
||
160 | #define KASEIKYO_COMMAND_OFFSET 28 // skip 28 bits (16 manufacturer & 4 parity & 8 genre) |
||
161 | #define KASEIKYO_COMMAND_LEN 12 // read 12 command bits (10 real command & 2 id) |
||
162 | #define KASEIKYO_COMPLETE_DATA_LEN 48 // complete length |
||
163 | #define KASEIKYO_STOP_BIT 1 // has stop bit |
||
164 | #define KASEIKYO_LSB 1 // LSB...MSB? |
||
165 | #define KASEIKYO_FRAMES 2 // KASEIKYO sends 1st frame 2 times |
||
166 | #define KASEIKYO_FLAGS 0 // flags |
||
167 | |||
168 | #define RECS80_START_BIT_PULSE_TIME 158.0e-6 // 158 usec pulse |
||
169 | #define RECS80_START_BIT_PAUSE_TIME 7432.0e-6 // 7432 usec pause |
||
170 | #define RECS80_PULSE_TIME 158.0e-6 // 158 usec pulse |
||
171 | #define RECS80_1_PAUSE_TIME 7432.0e-6 // 7432 usec pause |
||
172 | #define RECS80_0_PAUSE_TIME 4902.0e-6 // 4902 usec pause |
||
173 | #define RECS80_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms |
||
174 | #define RECS80_ADDRESS_OFFSET 2 // skip 2 bits (2nd start + 1 toggle) |
||
175 | #define RECS80_ADDRESS_LEN 3 // read 3 address bits |
||
176 | #define RECS80_COMMAND_OFFSET 5 // skip 5 bits (2nd start + 1 toggle + 3 address) |
||
177 | #define RECS80_COMMAND_LEN 6 // read 6 command bits |
||
178 | #define RECS80_COMPLETE_DATA_LEN 11 // complete length |
||
179 | #define RECS80_STOP_BIT 1 // has stop bit |
||
180 | #define RECS80_LSB 0 // MSB...LSB |
||
181 | #define RECS80_FLAGS 0 // flags |
||
182 | |||
183 | #define RC5_BIT_TIME 889.0e-6 // 889 usec pulse/pause |
||
184 | #define RC5_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms |
||
185 | #define RC5_ADDRESS_OFFSET 2 // skip 2 bits (2nd start + 1 toggle) |
||
186 | #define RC5_ADDRESS_LEN 5 // read 5 address bits |
||
187 | #define RC5_COMMAND_OFFSET 7 // skip 5 bits (2nd start + 1 toggle + 5 address) |
||
188 | #define RC5_COMMAND_LEN 6 // read 6 command bits |
||
189 | #define RC5_COMPLETE_DATA_LEN 13 // complete length |
||
190 | #define RC5_STOP_BIT 0 // has no stop bit |
||
191 | #define RC5_LSB 0 // MSB...LSB |
||
192 | #define RC5_FLAGS IRMP_PARAM_FLAG_IS_MANCHESTER // flags |
||
193 | |||
194 | #define DENON_PULSE_TIME 275.0e-6 // 275 usec pulse |
||
195 | #define DENON_1_PAUSE_TIME 1900.0e-6 // 1900 usec pause |
||
196 | #define DENON_0_PAUSE_TIME 775.0e-6 // 775 usec pause |
||
197 | #define DENON_FRAMES 2 // DENON sends each frame 2 times |
||
198 | #define DENON_AUTO_REPETITION_PAUSE_TIME 65.0e-3 // inverted repetition after 65ms |
||
199 | #define DENON_FRAME_REPEAT_PAUSE_TIME 65.0e-3 // frame repeat after 65ms |
||
200 | #define DENON_ADDRESS_OFFSET 0 // skip 0 bits |
||
201 | #define DENON_ADDRESS_LEN 5 // read 5 address bits |
||
202 | #define DENON_COMMAND_OFFSET 5 // skip 5 |
||
203 | #define DENON_COMMAND_LEN 10 // read 10 command bits |
||
204 | #define DENON_COMPLETE_DATA_LEN 15 // complete length |
||
205 | #define DENON_STOP_BIT 1 // has stop bit |
||
206 | #define DENON_LSB 0 // MSB...LSB |
||
207 | #define DENON_FLAGS 0 // flags |
||
208 | |||
209 | #define RC6_START_BIT_PULSE_TIME 2666.0e-6 // 2.666 msec pulse |
||
210 | #define RC6_START_BIT_PAUSE_TIME 889.0e-6 // 889 usec pause |
||
211 | #define RC6_TOGGLE_BIT_TIME 889.0e-6 // 889 msec pulse/pause |
||
212 | #define RC6_BIT_TIME 444.0e-6 // 889 usec pulse/pause |
||
213 | #define RC6_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms |
||
214 | #define RC6_ADDRESS_OFFSET 5 // skip "1" + 3 mode bits + 1 toggle bit |
||
215 | #define RC6_ADDRESS_LEN 8 // read 8 address bits |
||
216 | #define RC6_COMMAND_OFFSET 13 // skip 12 bits ("1" + 3 mode + 1 toggle + 8 address) |
||
217 | #define RC6_COMMAND_LEN 8 // read 8 command bits |
||
218 | #define RC6_COMPLETE_DATA_LEN_SHORT 21 // complete length |
||
219 | #define RC6_COMPLETE_DATA_LEN_LONG 36 // complete length |
||
220 | #define RC6_STOP_BIT 0 // has no stop bit |
||
221 | #define RC6_LSB 0 // MSB...LSB |
||
222 | #define RC6_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags |
||
223 | |||
224 | #define RECS80EXT_START_BIT_PULSE_TIME 158.0e-6 // 158 usec pulse |
||
225 | #define RECS80EXT_START_BIT_PAUSE_TIME 3637.0e-6 // 3637 usec pause |
||
226 | #define RECS80EXT_PULSE_TIME 158.0e-6 // 158 usec pulse |
||
227 | #define RECS80EXT_1_PAUSE_TIME 7432.0e-6 // 7432 usec pause |
||
228 | #define RECS80EXT_0_PAUSE_TIME 4902.0e-6 // 4902 usec pause |
||
229 | #define RECS80EXT_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms |
||
230 | #define RECS80EXT_ADDRESS_OFFSET 2 // skip 2 bits (2nd start + 1 toggle) |
||
231 | #define RECS80EXT_ADDRESS_LEN 4 // read 3 address bits |
||
232 | #define RECS80EXT_COMMAND_OFFSET 6 // skip 6 bits (2nd start + 1 toggle + 4 address) |
||
233 | #define RECS80EXT_COMMAND_LEN 6 // read 6 command bits |
||
234 | #define RECS80EXT_COMPLETE_DATA_LEN 12 // complete length |
||
235 | #define RECS80EXT_STOP_BIT 1 // has stop bit |
||
236 | #define RECS80EXT_LSB 0 // MSB...LSB |
||
237 | #define RECS80EXT_FLAGS 0 // flags |
||
238 | |||
239 | #define NUBERT_START_BIT_PULSE_TIME 1340.0e-6 // 1340 usec pulse |
||
240 | #define NUBERT_START_BIT_PAUSE_TIME 340.0e-6 // 340 usec pause |
||
241 | #define NUBERT_1_PULSE_TIME 1340.0e-6 // 1340 usec pulse |
||
242 | #define NUBERT_1_PAUSE_TIME 340.0e-6 // 340 usec pause |
||
243 | #define NUBERT_0_PULSE_TIME 500.0e-6 // 500 usec pulse |
||
244 | #define NUBERT_0_PAUSE_TIME 1300.0e-6 // 1300 usec pause |
||
245 | #define NUBERT_FRAMES 2 // Nubert sends 2 frames |
||
246 | #define NUBERT_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // auto repetition after 35ms |
||
247 | #define NUBERT_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 45ms |
||
248 | #define NUBERT_ADDRESS_OFFSET 0 // skip 0 bits |
||
249 | #define NUBERT_ADDRESS_LEN 0 // read 0 address bits |
||
250 | #define NUBERT_COMMAND_OFFSET 0 // skip 0 bits |
||
251 | #define NUBERT_COMMAND_LEN 10 // read 10 bits |
||
252 | #define NUBERT_COMPLETE_DATA_LEN 10 // complete length |
||
253 | #define NUBERT_STOP_BIT 1 // has stop bit |
||
254 | #define NUBERT_LSB 0 // MSB? |
||
255 | #define NUBERT_FLAGS 0 // flags |
||
256 | |||
257 | #define BANG_OLUFSEN_START_BIT1_PULSE_TIME 200.0e-6 // 200 usec pulse |
||
258 | #define BANG_OLUFSEN_START_BIT1_PAUSE_TIME 3125.0e-6 // 3125 usec pause |
||
259 | #define BANG_OLUFSEN_START_BIT2_PULSE_TIME 200.0e-6 // 200 usec pulse |
||
260 | #define BANG_OLUFSEN_START_BIT2_PAUSE_TIME 3125.0e-6 // 3125 usec pause |
||
261 | #define BANG_OLUFSEN_START_BIT3_PULSE_TIME 200.0e-6 // 200 usec pulse |
||
262 | #define BANG_OLUFSEN_START_BIT3_PAUSE_TIME 15625.0e-6 // 15625 usec pause |
||
263 | #define BANG_OLUFSEN_START_BIT4_PULSE_TIME 200.0e-6 // 200 usec pulse |
||
264 | #define BANG_OLUFSEN_START_BIT4_PAUSE_TIME 3125.0e-6 // 3125 usec pause |
||
265 | #define BANG_OLUFSEN_PULSE_TIME 200.0e-6 // 200 usec pulse |
||
266 | #define BANG_OLUFSEN_1_PAUSE_TIME 9375.0e-6 // 9375 usec pause |
||
267 | #define BANG_OLUFSEN_0_PAUSE_TIME 3125.0e-6 // 3125 usec pause |
||
268 | #define BANG_OLUFSEN_R_PAUSE_TIME 6250.0e-6 // 6250 usec pause (repeat last bit) |
||
269 | #define BANG_OLUFSEN_TRAILER_BIT_PAUSE_TIME 12500.0e-6 // 12500 usec pause (trailer bit) |
||
270 | #define BANG_OLUFSEN_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms |
||
271 | #define BANG_OLUFSEN_ADDRESS_OFFSET 0 // no address bits |
||
272 | #define BANG_OLUFSEN_ADDRESS_LEN 0 // no address bits |
||
273 | #define BANG_OLUFSEN_COMMAND_OFFSET 3 // skip startbits 2, 3, 4 |
||
274 | #define BANG_OLUFSEN_COMMAND_LEN 16 // read 16 command bits |
||
275 | #define BANG_OLUFSEN_COMPLETE_DATA_LEN 20 // complete length: startbits 2, 3, 4 + 16 data bits + trailer bit |
||
276 | #define BANG_OLUFSEN_STOP_BIT 1 // has stop bit |
||
277 | #define BANG_OLUFSEN_LSB 0 // MSB...LSB |
||
278 | #define BANG_OLUFSEN_FLAGS 0 // flags |
||
279 | |||
280 | #define GRUNDIG_OR_NOKIA_BIT_TIME 528.0e-6 // 528 usec pulse/pause |
||
281 | #define GRUNDIG_OR_NOKIA_PRE_PAUSE_TIME 2639.0e-6 // 2639 usec pause after pre bit |
||
282 | #define GRUNDIG_OR_NOKIA_FRAME_REPEAT_PAUSE_TIME 117.76e-3 // info frame repeat after 117.76 ms |
||
283 | #define GRUNDIG_OR_NOKIA_STOP_BIT 0 // has no stop bit |
||
284 | #define GRUNDIG_OR_NOKIA_LSB 1 // MSB...LSB |
||
285 | #define GRUNDIG_OR_NOKIA_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags |
||
286 | |||
287 | #define GRUNDIG_FRAMES 2 // GRUNDIG sends each frame 1+1 times |
||
288 | #define GRUNDIG_AUTO_REPETITION_PAUSE_TIME 20.0e-3 // repetition after 20ms |
||
289 | #define GRUNDIG_ADDRESS_OFFSET 0 // no address |
||
290 | #define GRUNDIG_ADDRESS_LEN 0 // no address |
||
291 | #define GRUNDIG_COMMAND_OFFSET 1 // skip 1 start bit |
||
292 | #define GRUNDIG_COMMAND_LEN 9 // read 9 command bits |
||
293 | #define GRUNDIG_COMPLETE_DATA_LEN 10 // complete length: 1 start bit + 9 data bits |
||
294 | |||
295 | #define NOKIA_FRAMES 3 // NOKIA sends each frame 1 + 1 + 1 times |
||
296 | #define NOKIA_AUTO_REPETITION_PAUSE_TIME 20.0e-3 // repetition after 20ms |
||
297 | #define NOKIA_ADDRESS_OFFSET 9 // skip 9 bits (1 start bit + 8 data bits) |
||
298 | #define NOKIA_ADDRESS_LEN 8 // 7 address bits |
||
299 | #define NOKIA_COMMAND_OFFSET 1 // skip 1 bit (1 start bit) |
||
300 | #define NOKIA_COMMAND_LEN 8 // read 8 command bits |
||
301 | #define NOKIA_COMPLETE_DATA_LEN 17 // complete length: 1 start bit + 8 address bits + 8 command bits |
||
302 | |||
303 | #define SIEMENS_BIT_TIME 250.0e-6 // 250 usec pulse/pause |
||
304 | #define SIEMENS_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms |
||
305 | #define SIEMENS_ADDRESS_OFFSET 2 // skip 2 start bits |
||
306 | #define SIEMENS_ADDRESS_LEN 12 // read 12 address bits |
||
307 | #define SIEMENS_COMMAND_OFFSET 15 // skip 15 bits (2 start bits + 12 address bits + 1 inverted bit) |
||
308 | #define SIEMENS_COMMAND_LEN 8 // read 7 + 1 command bits, last bit is only check bit. |
||
309 | #define SIEMENS_COMPLETE_DATA_LEN 23 // complete length |
||
310 | #define SIEMENS_STOP_BIT 0 // has no stop bit |
||
311 | #define SIEMENS_LSB 0 // MSB...LSB |
||
312 | #define SIEMENS_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags |
||
313 | |||
314 | #define FDC_START_BIT_PULSE_TIME 2085.0e-6 // 2085 usec pulse |
||
315 | #define FDC_START_BIT_PAUSE_TIME 966.0e-6 // 966 usec pause |
||
316 | #define FDC_PULSE_TIME 300.0e-6 // 300 usec pulse |
||
317 | #define FDC_1_PAUSE_TIME 715.0e-6 // 715 usec pause |
||
318 | #define FDC_0_PAUSE_TIME 220.0e-6 // 220 usec pause |
||
319 | #define FDC_FRAME_REPEAT_PAUSE_TIME 60.0e-3 // frame repeat after 60ms |
||
320 | #define FDC_ADDRESS_OFFSET 0 // skip 0 bits |
||
321 | #define FDC_ADDRESS_LEN 14 // read 14 address bits, but use only 6, shift 8 into command |
||
322 | #define FDC_COMMAND_OFFSET 20 // skip 20 bits |
||
323 | #define FDC_COMMAND_LEN 12 // read 12 bits |
||
324 | #define FDC_COMPLETE_DATA_LEN 40 // complete length |
||
325 | #define FDC_STOP_BIT 1 // has stop bit |
||
326 | #define FDC_LSB 1 // LSB...MSB |
||
327 | #define FDC_FLAGS 0 // flags |
||
328 | |||
329 | #define RCCAR_START_BIT_PULSE_TIME 2000.0e-6 // 2000 usec pulse |
||
330 | #define RCCAR_START_BIT_PAUSE_TIME 2000.0e-6 // 2000 usec pause |
||
331 | #define RCCAR_PULSE_TIME 600.0e-6 // 360 usec pulse |
||
332 | #define RCCAR_1_PAUSE_TIME 450.0e-6 // 650 usec pause |
||
333 | #define RCCAR_0_PAUSE_TIME 900.0e-6 // 180 usec pause |
||
334 | #define RCCAR_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms |
||
335 | #define RCCAR_ADDRESS_OFFSET 0 // skip 0 bits |
||
336 | #define RCCAR_ADDRESS_LEN 0 // read 0 address bits |
||
337 | #define RCCAR_COMMAND_OFFSET 0 // skip 0 bits |
||
338 | #define RCCAR_COMMAND_LEN 13 // read 13 bits |
||
339 | #define RCCAR_COMPLETE_DATA_LEN 13 // complete length |
||
340 | #define RCCAR_STOP_BIT 1 // has stop bit |
||
341 | #define RCCAR_LSB 1 // LSB...MSB |
||
342 | #define RCCAR_FLAGS 0 // flags |
||
343 | |||
344 | #define JVC_START_BIT_PULSE_TIME 9000.0e-6 // 9000 usec pulse |
||
345 | #define JVC_START_BIT_PAUSE_TIME 4500.0e-6 // 4500 usec pause |
||
346 | #define JVC_PULSE_TIME 560.0e-6 // 560 usec pulse |
||
347 | #define JVC_1_PAUSE_TIME 1690.0e-6 // 1690 usec pause |
||
348 | #define JVC_0_PAUSE_TIME 560.0e-6 // 560 usec pause |
||
349 | #define JVC_FRAME_REPEAT_PAUSE_TIME 22.0e-3 // frame repeat after 22ms |
||
350 | #define JVC_ADDRESS_OFFSET 0 // skip 0 bits |
||
351 | #define JVC_ADDRESS_LEN 4 // read 4 address bits |
||
352 | #define JVC_COMMAND_OFFSET 4 // skip 4 bits |
||
353 | #define JVC_COMMAND_LEN 12 // read 12 bits |
||
354 | #define JVC_COMPLETE_DATA_LEN 16 // complete length |
||
355 | #define JVC_STOP_BIT 1 // has stop bit |
||
356 | #define JVC_LSB 1 // LSB...MSB |
||
357 | #define JVC_FLAGS 0 // flags |
||
358 | |||
359 | #define NIKON_START_BIT_PULSE_TIME 2200.0e-6 // 2200 usec pulse |
||
360 | #define NIKON_START_BIT_PAUSE_TIME 27100.0e-6 // 27100 usec pause |
||
361 | #define NIKON_PULSE_TIME 500.0e-6 // 520 usec pulse |
||
362 | #define NIKON_1_PAUSE_TIME 3500.0e-6 // 3500 usec pause |
||
363 | #define NIKON_0_PAUSE_TIME 1500.0e-6 // 1500 usec pause |
||
364 | #define NIKON_FRAME_REPEAT_PAUSE_TIME 60.0e-3 // frame repeat after 60ms |
||
365 | #define NIKON_ADDRESS_OFFSET 0 // skip 0 bits |
||
366 | #define NIKON_ADDRESS_LEN 0 // read 0 address bits |
||
367 | #define NIKON_COMMAND_OFFSET 0 // skip 0 bits |
||
368 | #define NIKON_COMMAND_LEN 2 // read 2 bits |
||
369 | #define NIKON_COMPLETE_DATA_LEN 2 // complete length |
||
370 | #define NIKON_STOP_BIT 1 // has stop bit |
||
371 | #define NIKON_LSB 0 // LSB...MSB |
||
372 | #define NIKON_FLAGS 0 // flags |
||
373 | |||
374 | #define AUTO_FRAME_REPETITION_TIME 80.0e-3 // SIRCS/SAMSUNG32/NUBERT: automatic repetition after 25-50ms |
||
375 | // KASEIKYO: automatic repetition after 75ms |
||
376 | |||
377 | #define TRUE 1 |
||
378 | #define FALSE 0 |
||
379 | |||
380 | #define IRMP_FLAG_REPETITION 0x01 |
||
381 | |||
382 | typedef struct |
||
383 | { |
||
384 | uint8_t protocol; // protocol, i.e. NEC_PROTOCOL |
||
385 | uint16_t address; // address |
||
386 | uint16_t command; // command |
||
387 | uint8_t flags; // flags, e.g. repetition |
||
388 | } IRMP_DATA; |
||
389 | |||
390 | |||
391 | /** |
||
392 | * Initialize IRMP decoder |
||
393 | * @details Configures IRMP input pin |
||
394 | */ |
||
395 | extern void irmp_init (void); |
||
396 | |||
397 | /** |
||
398 | * Get IRMP data |
||
399 | * @details gets decoded IRMP data |
||
400 | * @param pointer in order to store IRMP data |
||
401 | * @return TRUE: successful, FALSE: failed |
||
402 | */ |
||
403 | extern uint8_t irmp_get_data (IRMP_DATA *); |
||
404 | |||
405 | /** |
||
406 | * ISR routine |
||
407 | * @details ISR routine, called 10000 times per second |
||
408 | */ |
||
409 | extern uint8_t irmp_ISR (void); |
||
410 | |||
411 | #ifdef __cplusplus |
||
412 | } |
||
413 | #endif |
||
414 | |||
415 | #endif /* _WC_IRMP_H_ */ |